Yelp is not working properly, and I have been advised to enable cookies and Java Script. I have been trying for 1 hour using suggestions that don't work. Help.
Someone suggested to go to firefox > options> content > and then there is supposed to be a button that enables Java Script. It is not there. Where did it go, please? The cookies problem I have no idea how to address. Have not gotten past the Java Script problem yet. I have updated Java many, many times in the past couple of months at the suggestion of Avast.
You can check on the <b>about:config</b> page if the javascript.enabled pref is set to true.
*http://kb.mozillazine.org/about:config
You can try basic steps like these in case of issues with web pages:
Reload web page(s) and bypass the cache to refresh possibly outdated or corrupted files.
*Hold down the Shift key and left-click the Reload button
*Press "Ctrl + F5" or press "Ctrl + Shift + R" (Windows,Linux)
*Press "Command + Shift + R" (Mac)
Clear the cache and the cookies from websites that cause problems.
"Clear the Cache":
*Firefox/Tools > Options > Advanced > Network > Cached Web Content: "Clear Now"
"Remove Cookies" from sites causing problems:
*Firefox/Tools > Options > Privacy > Cookies: "Show Cookies"
Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Firefox/Tools > Add-ons > Appearance).
*Do NOT click the Reset button on the Safe Mode start window.
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes
Similar Messages
-
Where can I go to get REAL SUPPORT for my apple products that don't work as adverstised?
I'm fed up with this mickey mouse pathetic attempt at users aimless trying to support other users. I paid a lot of money for these devices which don't work as advertised -- in particular iCLOUD. My time is MONEY and i've spent a lot of hours searching for support of this site and posting my issues and never once getting any feedback/solutions. I want real support, an Apple technician who can get down and solve these issues that i'm experiencing.
How do I get that? What number to do I call?
Incredibly disappointed by this "support community"... WEAK SAUCE
Rickrhodel68 wrote:
I'm fed up with this mickey mouse pathetic attempt at users aimless trying to support other users. I paid a lot of money for these devices which don't work as advertised -- in particular iCLOUD. My time is MONEY and i've spent a lot of hours searching for support of this site and posting my issues and never once getting any feedback/solutions. I want real support, an Apple technician who can get down and solve these issues that i'm experiencing.
How do I get that? What number to do I call?
Incredibly disappointed by this "support community"... WEAK SAUCE
Rick
iCloud is free, what did you pay for?
Don't bother replying
Just look here -
Hi friends, I'm having troubles with my Ipad 2. I was working with it and suddenly the screen distorted. Now it is not possible to get it back to work properly. In fact, the screen is now black and nothing I have done makes the Ipad works again. Please Help. Thanks in advance.
I think you should make an Genius Appointment.
Genius Appointment
http://www.apple.com/retail/geniusbar/ -
My 10.8.3 update did not install properly citing an 'Unknown Error'. Now, my Mail and Mac App Store aren't working. What went wrong and how do i fix it ?
I tried this and still have the same problems. If I open Address book or the Mac App Store I get the library rebuild popup and a hang. I created a fresh user and then things are better apart from the printing issue. Its clearly some 3rd party software issue but the crash logs are meningless to me. I used the excellent Etre check app from http://www.etresoft.com/etrecheck so I have a list of what is being loaded and can compare clean and crashed user info but as I cant work out which of the startup items, launch agents, launch daemons etc that are causing the problem.
I have eliminated Dropbox, Mac Keeper and Witness, and it isnt related to my exterrnal LED cinema dispay or my external thunderbolt drives, or any USB devices if thats any help to anyone else. Info from Etrecheck follows -
Kernel Extensions:
com.oxsemi.driver.OxsemiDeviceType00 Version: 1.28.7
com.rogueamoeba.InstantOn Version: 6.0.2
com.rogueamoeba.InstantOnCore Version: 6.0.2
com.Cycling74.driver.Soundflower Version: 1.5.3
Problem System Launch Daemons:
Problem System Launch Agents:
Launch Daemons:
[not loaded] com.adobe.fpsaud.plist
[not loaded] com.adobe.SwitchBoard.plist
[not loaded] com.bombich.ccc.plist
[not loaded] com.dymo.pnpd.plist
[not loaded] com.intego.BackupManagerPro.daemon.plist
[not loaded] com.micromat.TechToolProDaemon.plist
[not loaded] com.microsoft.office.licensing.helper.plist
[not loaded] com.orbicule.witnessd.plist
[not loaded] com.sierrawireless.SwitchTool.plist
[not loaded] com.stclairsoft.AppTamerAgent.plist
[not loaded] org.macosforge.xquartz.privileged_startx.plist
[not loaded] pcloudd.plist
Launch Agents:
[loaded] com.divx.dms.agent.plist
[loaded] com.divx.update.agent.plist
[loaded] com.epson.epw.agent.plist
[loaded] com.lacie.raidmonitor.daemon.plist
[loaded] com.lacie.safemanager.daemon.plist
[loaded] com.micromat.TechToolProAgent.plist
[loaded] com.orbicule.WitnessUserAgent.plist
[loaded] org.macosforge.xquartz.startx.plist
User Launch Agents:
[not loaded] .DS_Store
[loaded] com.adobe.AAM.Updater-1.0.plist
[loaded] com.adobe.ARM.202f4087f2bbde52e3ac2df389f53a4f123223c9cc56a8fd83a6f7ae.plist
[loaded] com.digitalrebellion.SoftwareUpdateAutoCheck.plist
[loaded] com.divx.agent.postinstall.plist
[loaded] com.google.keystone.agent.plist
[loaded] com.propaganda.dejavu.dvmonitor.plist
[loaded] com.valvesoftware.steamclean.plist
[loaded] com.zeobit.MacKeeper.Helper.plist
User Login Items:
iTunesHelper
Synergy
TomTomHOMERunner
Dropbox
3rd Party Preference Panes:
Déjà Vu
Flash Player
Flip4Mac WMV
GR-55
Paragon NTFS for Mac ® OS X
Perian
Printopia
TechTool Protection
Witness -
I have similar problem, my apple tv which has always worked properly with my Samsung tv will no longer play any audio after the latest 5.1 upgrade. Very frustrating as it was working perfectly before. I am starting to not trust apple upgrades until proven for example ios6 on iPhone with that stupid map app instead of google maps.
I just want to buy and hear my iTunes music and videos on my apple tv, could before cant now. Thank you apple. Time to pack up the apple tv and start torrenting without the ios-bs.
Disheartened apple fan.Welcome to the discussion forums.
Try going to synching in the sources menu on your tv and selecting 'change itunes library', when it gives you the passcode check itunes to see if the tv is showing up as a new device, if so try entering the pass code. It may be that your tv is seeing itunes as a different library because of a recent upgrade. -
I have been trying for hours to extend my Extreme Gen 5 network with an Express Gen 2. But no matter what I do or try, it doesn't work. What does happen is my internet gets blocked somehow when the Express is online and looks like it's set up perfect and 'green' - but no internet connection for anything even though the Extreme is green and the modem is good. Once I disconnect the Express, everything is good again.
I've tried LAN, WAN, though a switch, direct connect, Extreme set to Extend the network, the Express set to be an extension. Most of the time I get an error trying to update the Express. But when it seems to be set up perfect, the entire house can't get to the internet. Just when it looks right, it is so wrong.
If anyone can give me exact steps (e.g., "...from the Base Station menu, select the Restore Default Setting option" vice "...just restore the defaults..."), I would greatly appreciate it. I'm left to the conclusion that the Express is faulty. I've been using Airport Utility 6.2 from Mountain Lion on one computer and Airport Utility 5.6.1 from Snow Leopard on another computer (the latter give more control while the former just want you to 'forget' the Express).I finally got it working. I was trying to set it up ethernet. My biggest mistake was when the new Express came on, I did not select 'Continue' - I went straight to manual thinking that I would get the most setup options in manual mode. So everything I initially tried always resulted in 'wireless'. Even when I would update or restore default settings, the Express would not completely restart. Or sometimes I would get an error. So most of the time I had to unplug it. So when it came back up, none of my changes were retained. But there were a lot of times when everything was green and appeared to be fine. But anytime the ethernet cable was plugged in, no more internet.
So here's the weird part. When I finally tried 'continue' (vice manual), I would get 4 options. One would be 'ethernet' extended. So I would select it, it gave me green lights, all looked good, and still the same problem. This is when I got frustrated. I thought I had exhausted all possible combinations.
But somehow when trying continue again after another restore, I only got 3 options. One was the same ethernet extended option (can't remember what the missing 4th one was). And this time it worked - it gave me the big green circle with the checkmark saying it was successful. I don't know what I did different, but I know now that it won't work if 4 options come up to choose from. It will work if only 3 options come up. And success if only verified by the big checkmark. Had anyone anywhere said the checkmark declaring success is validation, then maybe I wouldn't have gone down so many rabbit holes thinking it should have been successful.
As for which Airport Utility I prefer, 6.2 looks nice, but it would just ignore the Express and would want me to 'forget' it and would not let me edit it. Airport Utility 5.6.1 was the one that I ended up using the most and finally had success with. It still strikes me as odd that there is no manually way to pick ethernet, it can only be choosen following a 'restore defaults', and only from the 3-option list (the 4-option list had the same ethernet choice, but it no worky).
Thanks for the response. I really do appreciate it.
Aiport Extreme Gen5 - internet access and router
Airport Express Gen2 - connected via ethernet, extending my wireless
- configured while connect directly to the Extreme, but now on a switch (16-port hub)
Using Airport 5.6.1
1) Restore Defaults from Base Station menu
2) Following restart, Select Continue
3) Of the 3 option presented, select 'ethernet.... extend network...'
- if 4 options are present, may not work
4) Wait for the green circle with the big white checkmark.
5) Connected Express to the switch where a cable went to other end of house - works.
Dead-zone went from 2mbps to 24mbps.
I probably spent 4 hours chasing my tail in anger. The correct way took about 5 minutes total.
Thanks again. -
i am trying to complete a form but can't get to the final drop down question as it is not displayed because it falls below where my screen ends. i have tried changing the resolution but that doesn't work. any suggestions?
brilliant
google chrome works where safari doesn't on my macbook air. many thanks
i now have an embarrassing qu. have dowloaded spider solitaire (sad!) and i can't add cards at the bottom of a column for the same reason - the display cuts short. i have tried to extend it with the arrows in the bottom corners but it makes no difference. any ideas? -
I tried updating iphone software and it did not work. It just shows connect to itunes with usb cable on the handset. I have tried for hours to try and turn the hanset off and troubleshoot but nothing works. The connect to itunes display can not be over-ridden.
Please help!!!oh and the device is not being recognised by itunes now either.
-
How do I enable cookies in 3.6.6? Privacy menu in Tools - Options do not have Remember History and Enable Cookies and Exception button. Again, verison is 3.6.6.
To see all the History and Cookie options, select: Tools > Options > Privacy > History: Firefox will: "Use custom settings for history"
See [[Options window - Privacy panel]] and [[Cookies]] -
We have 'CS6' version of Adobe. We are facing a problem with 'Acrobat Pro'. Every month that is stop working and everytime need to install. Kindly help us regarding solving this problem...
Your Acrobat is running in Trial Mode. Try this KB: Creative Cloud applications unexpectedly revert to trial mode | CS6, CCM
If it doesn't work you need to contact Adobe Support for assistance. -
My computer broke down, and I have tried for hours to install Elements 10 to my new computer. But it won't work; whats wrong?
Please review this
Download Photoshop Elements products | 13, 12, 11, 10 -
Hi, I've used four different Groups when emailing for the past few years, and suddenly they have stopped working. I've tried creating new Groups but that doesn't work either. I haven't changed or done anything different and it is driving me mad......can anyone help, please?!
Thanks for that information!
I'm sure I will be calling AppleCare, but the problem is, they charge for the phone calls don't they? Because I don't have money to be spending to be on the phone with a support service.
In other things, it seemed like the only time my MacBook was working was when I had Snow Leopard without the 10.6.8 update download that was supposed to be done to prepare for OS X Lion.
When I look at the information of my HD it says that I have 10.6.8 but that was the install that it claimed to have failed and caused me to restart resulting in all of the repeated problems.
Also, because my computer is currently down, and I've lost all files how would that effect the use of my iPhone? Because if it doesn't get fixed by the time OS 5 is released, how would I be able to upgrade?! -
I have a MBP 13" running 10.8, can I also install 10.6 to run apps that don't work with 10.8?
I have a 13" MBP running 10.8.2, can I also install 10.6 to run some apps that don't work with 10.8?
Uninstall Genieo:
http://www.thesafemac.com/arg-genieo/
See if that makes a difference.
Ciao.
DawnHerbie wrote:
Also is Safeboot ok to use?
Yes, it will do no harm, but it is meant for trouble shooting and you should not have to use it all the time.
Message was edited by: OGELTHORPE -
Both Chrome and Safari interrupt online streaming to request/demand an update for a PC program that doesn't work on Macs. What is going on?
The update alerts are fake, and are intended to dupe you into installing malware or disclosing private information so that your identity can be stolen.
You might get the alerts when visiting a website that has been hacked. Don't visit the site again. If applicable, notify the site administrator of the problem, but don't send email to an unknown party.
If you get the alerts when visiting more than one well-known website, such as Google, YouTube, or Facebook, then they're almost certainly the result of an attack on your router that has caused you to get false results from looking up the addresses of Internet servers. Requests sent to those sites are redirected to a server controlled by the attacker. It's possible, but less likely, that the DNS server used by your ISP has been attacked, but you should assume that the router is at fault until proven otherwise.
The router's documentation should tell you how to reset it to the factory default state. Usually there's a pinhole switch somewhere in the back. It may be labeled "RESET." Insert the end of a straightened paper clip or a similar tool and press the button inside for perhaps 15 seconds, or as long as the instructions specify.
After resetting the router, quit the web browser and relaunch it while holding down the shift key. From the Safari menu bar, select
Safari ▹ Preferences... ▹ Privacy ▹ Remove All Website Data
and confirm. Do the equivalent if you use another browser. Open the Downloads folder and delete anything you don't recognize.
Then go through the router's initial setup procedure. I can't be specific, because it's different for every model. The key points are these:
1. Don't allow the router to be administered from the WAN (Internet) port, if it has that option. Most do.
2. Set a strong password to protect the router's settings: at least ten random upper- and lower-case letters and digits. Don't use the default password or any other that could be guessed. Save the password in your keychain. Any password that you can remember is weak.
3. If the router is wireless, or if you have a wireless access point on the network, use "WPA 2 Personal" security and set a different strong password to protect the network. If the router or access point doesn't support WPA 2, it's obsolete and must be replaced.
During the time the router was compromised, you were redirected to bogus websites. If you ever connected to a secure site and got a warning from your browser that the identity of the server could not be verified, and you dismissed that warning in order to log in, assume that your credentials for the site have been stolen and that the attacker has control of the account. This warning also applies to all websites on which you saw the fake update alerts.
Check the router manufacturer's website for a firmware update.
If you downloaded and installed what you thought was a software update, ask for instructions. -
I changed my LCD last day and now i noticed all my pictures on my phone are gone. I tried to restore the back that I got yesterday but it wont let me because its telling me there is not enough space on my phone!!! That's wierd because I didn't download any app or anything else since my last backup and on the other hand about 3000 pictures are gone, how come there is not enough space left! I also check my usage on my phone and it shows that i have about 7.0 GB pictures!!! BUT my photos is empty! I want my picture back on my phone any solution anyone?
Thanks for your reply!
I just called the guy who changed my LCD and asked him what happend, he said there were no pictures on your phone when you gave it to me! i know he is lying tho!
My apple warranty is over and I have to pay them to get some help over the phone!
Maybe you are looking for
-
Bridge CC. on opening message says unable to read cache, purge cache. This does not help.
On opening message says unable to read cache, purge cache. Purging the cache does not help and Bridge continues to hang. Was working fine before.
-
I need help with iTunes. I just bought a new laptop and I have a few questions
So I just bought a new laptop and few days ago. It's an HP. I have the iPhone 4 (8GB). So all my songs from iCloud are on my phone. I want to manually put them on my phone. All of my songs, videos, pictures etc. are on my new laptop. I went to apply
-
Auto copy cells to second sheet
hi, good people! is there a way to auto copy cells in second sheet. i have many rows with data, i want from my sheet1 colum C copy all rows that contain name "apr" to sheet2, and if i add new row with name "apr" it will auto copy it to sheet2... is t
-
The Angel management system used for classes does not support version 7. That's huge.
-
Https serverfarm with http sorry server
Hello all, I am having difficulty configuring a sorry server for an existing https serverfarm. The sorry (backup) server is failing all connections and I think it's because I can not determine a way to differentiate ssl connections for the product