Yes, another Airport question

I am having a common problem (as I have seen from numerous google searches) with my airport card in my Macbook. I am running 10.4.11 on the white macbooks that came out about 3 years ago...My Macbook has been awesome for almost the entire period of time, however, I keep losing my connection with my apple airport wireless router. I tested the connection with another computer and the signal is strong all over the house....I, however, have to be about 5 or 6 feet away from the router in order to receive a strong signal, and even then it fluctuates between 3 and 2 bars.
From searching literally hundreds of posts, I cannot quite find an answer/solution to my problem...I have deduced that I either have a wireless network in the area that is interfering with my network or I just need a new wireless card in my macbook.
I looked up wireless cards on ebay and it seems like I can get one pretty cheap, but I would be very apprehensive to open up the computer and install it, for I would probably screw it up somehow. If I were to buy the card on ebay and schedule an appt. with a genius, do you think they would install it for me...I don't mind paying. My appleCare warrantee has expired long ago...so, I am not sure if they would even consider helping me.
Also, I have seen that I could update my OS from Tiger to Snow Leopard, but I don't want to do that if it is not necessary. I have made sure that I have the latest firmware updates and everything and it seems all up to date.
If anyone has any suggestions, please let me know.
Thanks, in advance, for even reading this rambling diatribe...
Message was edited by: neworder72

Welcome to the discussions!
If you take your laptop to the coffee place or other location and can connect with no problems, your wireless card is fine. If you continue to have connection problems, it may be that wireless card is in need of replacement.
Have you downloaded a utility like iStumbler, www.istumbler.net to get a look at the signal strength and noise on your network? The bars at the top of the screen are not a very good indicator of the actual signal on your network and tell you nothing about the quality of the signal.
Look for other networks in your vicinity and note in particular what channel your wireless is operating on. There may be other networks on the same channel or adjacent channels that are interfering with your network. Cordless phones and security systems at the neighbors can also cause problems with any wireless network. Most modern routers allow their users to create "hidden" networks that can't be seen but cause problems nonetheless. Not much you do about that.
AirPort Utility will allow you to change the channel on your wireless network if you suspect this may help matters. You may need to experiment with a number of different settings to find the best compromise, particularly if you are in an area with a number of networks.

Similar Messages

Another newb question: multiple virtual servers

Hi, I have yet another ignorant question. I have several unrelated web projects that I am working on, and I would like to be able to set up a virtual server for each one for testing purposes, such as: http://project1, http://project2, http://project3. Can someone tell me if this is doable, and if there are any tutorials/resources on this for someone who has 0 experience running a web serer? Sorry for being so ignorant!

Yes, it is doable.
You can setup virtual server either by IP or by name.
If you have one IP, and want to set them up by name (ex. http://project1, http://project2, http://project3) you can do so easily with this type of configuration:
<virtual-server>
    <name>mydomain</name>
    <http-listener-name>http-listener-1</http-listener-name>
    <host>*.mydomain.com</host>
    <document-root>/www/domain</document-root>
</virtual-server>
<virtual-server>
    <name>myotherdomain</name>
    <http-listener-name>http-listener-1</http-listener-name>
    <host>*.myotherdomain.com</host>
    <document-root>/www/myotherdomain</document-root>
</virtual-server>
....The important part here is that
a) all virtual servers share the same HTTP listener
b) which virtual server serves the request depends on the $HOST request header send by the client. Sun Web Server does the matching for you. It will match $HOST vs. the virtual server's host attribute. Depending on which site you connect to the right virtual server will be used.
c) if the $HOST request header does not match any of the virtual servers, then the default virtual server defined in the HTTP listener will be used.
To create a virtual server, use the Admin GUI, access the configuration, and then add new virtual server. Or use the following CLI command.
wadm> create-virtual-server --config=myconfig --http-listener-name=http-listener-1 --document-root=/www/docs/myserver.com --host-pattern=myserver.com --log-file=../logs/myserver.com-error_logs myserverHost pattern will be used for matching. Some of this elements might be optional.
Hope that helps. And keep the questions coming :D
Edit: Also check the documentation
Using Virtual Servers in SJS Web Server 7.0

Yes another user with problem with Apple Mobile Device Support, I am getting the error message: Service 'Apple Mobile Device'(Apple Mobile Device) failed to start. Vertify that you have sufficient privileges to start system service....

Yes another user with problem with Apple Mobile Device Support, I am getting the error message: Service 'Apple Mobile Device'(Apple Mobile Device) failed to start. Vertify that you have sufficient privileges to start system service....I hit retry and it came up again. I hit ignore and it prompted me to hit finish so Itunes can open. I looked thru alot of these posts on here to try and resolve this problem myself but it's not working too well...I downloaded Itunes to my desktop so I can right click it with the program i downloaded called WinRAR. I extracted it and then went into the folder called Itunes64setup. I saw the file called AppleMobileDeviceSupport64 in there so I began to try and download it on it's own. Well that didn't work as I planned and got this error message:
Apple Mobile Device Support wasn't installed on your computer. The installer encountered errors before Apple Mobile Device Support could be configured. Your system has not been modified. To retry these operations at a later time,please run the installer again.
Well I tried to run it again and came up with the same message...I see that some people got great support to help them so I am hoping someone can help me as well. I know "b nor" is very qualfied and hopefully can help me! Please advise what I can do. Thank you

Hi Iss9243,
Welcome to the Support Communities!
You've already tried some great troubleshooting steps, but the article below gives you quite a few more for this issue. Hope it helps ....
iTunes 11.1.4 for Windows: Unable to install or open
http://support.apple.com/kb/TS5376
Cheers,
- Judy

After clicking "yes" to the question "do you want to update itunes now", i waited 2 hours and 15 minutes and it was still "loading". i turned computer off thinking something was wrong. now itunes won't open at all. do i need to download itunes again?

after clicking "yes" to the question "do you want to update itunes now", i waited 2 hours and 15 minutes and it was still "loading". i turned computer off thinking something was wrong. now itunes won't open at all. do i need to download itunes again?

Did you actually download the installer from Apple or did you use Software Update. You can download the installer http://www.apple.com/itunes/download/
Maybe I'm old fashioned but I would consider repairing permissions first using Disk Utility because something caused this to go wrong the first time. And of course make a backup of your whole library first. It shouldn't happen but some have complained about their libraries being wiped out by iTunes updates. Better safe...

Spry Menu 2.0 issues in IE7..   yes another one!

I have CS4, and have used the widget browser to create a Spry Menu 2.0 and have imported it to my site. It displays fine in every browser except for IE7. I have been reading a LOT of threads on issues similiar to this one, so I'm prepared to tell everyone I know to upgrade to at least IE8!! However, I would like to fix it if possible. The menu bar is located in an include file and is attached to all my pages through the php function. I have made zero changes to the css code since I imported it into the site.
I also am wondering why there are two css pages for the menu bar.??
Any help would be appreciated..
One of the pages on the site is: michaelandrewshairstudio.com/offers.php
That page is: ( I have taken out some meta tags and content, but the div's are all still in place.) I also deleted some commented tags by accident when I imported it..
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<html xmlns="http://www.w3.org/1999/xhtml">
<head>
<meta http-equiv="Content-Type" content="text/html; charset=utf-8" />
<title>Michael Andrews Hair Salon Offers</title>
<link href="Spry-UI-1.7/css/Menu/basic/SpryMenuBar.css" rel="stylesheet" type="text/css" />
<link href="Spry-UI-1.7/css/Menu/basic/SpryMenuBasic.css" rel="stylesheet" type="text/css" />
<script type='text/javascript' src="Spry-UI-1.7/includes/SpryDOMUtils.js"></script>
<script type='text/javascript' src="Spry-UI-1.7/includes/SpryDOMEffects.js"></script>
<script type='text/javascript' src="Spry-UI-1.7/includes/SpryWidget.js"></script>
<script type='text/javascript' src="Spry-UI-1.7/includes/SpryMenu.js"></script>
<script type='text/javascript' src="Spry-UI-1.7/includes/plugins/MenuBar2/SpryMenuBarKeyNavigationPlugin.js"></script>
<script type='text/javascript' src="Spry-UI-1.7/includes/plugins/MenuBar2/SpryMenuBarIEWorkaroundsPlugin.js"></script>
<link href="CSS/stylesA.css" rel="stylesheet" type="text/css" />
</head>
<body>
<div id="outerwrapper">
<div id="header">
<div id="navbar">
<?php include("Spry-UI-1.7/includes/SpryMenuBar.php"); ?>
</div>
</div>
<div id="mainbody">
<div id="logo">
</div>
<hr />
<div id="content">
</div>
</div>
<div id="footer">
<div id="footernav">
</div>
<div id="footertext">
</div>
</div>
</div>
</body>
</html>
SpryMenuBar.css
#MenuBar {
background-color:#333;
font-family: "Trebuchet MS", Arial, Helvetica, sans-serif; /* Specify fonts on on MenuBar and subMenu MenuItemContainer, so MenuItemContainer,
            MenuItem, and MenuItemLabel
            at a given level all use same definition for ems.
            Note that this means the size is also inherited to child submenus,
            so use caution in using relative sizes other than
            100% on submenu fonts. */
font-weight: normal;
font-size: 14px;
font-style: normal;
padding:0;
border-color: #999999 #999999 #999999 #999999;
border-width:3px;
border-style: outset outset outset outset;
/* Caution: because ID+class selectors do not work properly in IE6, but we want to restrict these rules to just this
widget instance, we have used string-concatenated classnames for our selectors for the layout type of the menubar
in this section. These have very low specificity, so be careful not to accidentally override them. */
.MenuBar br { /* using just a class so it has same specificity as the ".MenuBarFixedCentered br" rule bleow */
display:none;
.MenuBarLeftShrink {
float: left; /* shrink to content, as well as float the MenuBar */
width: auto;
.MenuBarRightShrink {
float: right; /* shrink to content, as well as float the MenuBar */
width: auto;
.MenuBarFixedLeft {
float: left;
width: 80em;
.MenuBarFixedCentered {
float: none;
width: 80em;
margin-left:auto;
margin-right:auto;
.MenuBarFixedCentered br {
clear:both;
display:block;
.MenuBarFixedCentered .SubMenu br {
display:none;
.MenuBarFullwidth {
float: left;
width: 100%;
/* Top level menubar items - these actually apply to all items, and get overridden for 1st or successive level submenus */
#MenuBar .MenuItemContainer {
padding: 0px 0px 0px 0px;
margin: 0; /* Zero out margin on the item containers. The MenuItem is the active hover area.
    For most items, we have to do top or bottom padding or borders only on the MenuItem
    or a child so we keep the entire submenu tiled with items.
    Setting this to 0 avoids "dead spots" for hovering. */
#MenuBar .MenuItem {
padding: 0px 24px 0px 0px;
background-color:#333333;
border-width:1px;
border-color: #cccccc #ffffff #cccccc #999999;
border-style: none none none solid;
#MenuBar .MenuItemFirst {
border-style: none none none none;
#MenuBar .MenuItemLast {
border-style: none none none solid;
#MenuBar .MenuItem .MenuItemLabel{
text-align:center;
line-height:1.4em;
color:#cccccc;
background-color:#333333;
padding: 6px 15px 6px 39px;
width: 10em;
width:auto;
.SpryIsIE6 #MenuBar .MenuItem .MenuItemLabel{
width:1em; /* Equivalent to min-width in modern browsers */
/* First level submenu items */
#MenuBar .SubMenu .MenuItem {
font-family: "Trebuchet MS", Arial, Helvetica, sans-serif;
font-weight: normal;
font-size: 12px;
font-style: normal;
background-color:#666666;
padding:0px 2px 0px 0px;
border-width:1px;
border-color: #cccccc #cccccc #cccccc #cccccc;
/* Border styles are overriden by first and last items */
border-style: solid solid none solid;
#MenuBar .SubMenu .MenuItemFirst {
border-style: solid solid none solid;
#MenuBar .SubMenu .MenuItemFirst .MenuItemLabel{
padding-top: 6px;
#MenuBar .SubMenu .MenuItemLast {
border-style: solid solid solid solid;
#MenuBar .SubMenu .MenuItemLast .MenuItemLabel{
padding-bottom: 6px;
#MenuBar .SubMenu .MenuItem .MenuItemLabel{
text-align:left;
line-height:1em;
background-color:#666666;
color:#cccccc;
padding: 6px 12px 6px 5px;
width: 7em;
width:auto;
/* Hover states for containers, items and labels */
#MenuBar .MenuItemHover {
background-color: #333333;
border-color: #cccccc #cccccc #cccccc #cccccc;
#MenuBar .MenuItemWithSubMenu.MenuItemHover .MenuItemLabel{
background-color: #333333; /* consider exposing this prop separately*/
color: #ffffff;
#MenuBar .MenuItemHover .MenuItemLabel{
background-color: #333333;
color: #ffffff;
#MenuBar .SubMenu .MenuItemHover {
background-color: #666666;
border-color: #cccccc #cccccc #cccccc #cccccc;
#MenuBar .SubMenu .MenuItemHover .MenuItemLabel{
background-color: #666666;
color: #ffffff;
/* Submenu properties -- First level of submenus */
#MenuBar .SubMenuVisible {
background-color:#333;
min-width:100%; /* This keeps the menu from being skinnier than the parent MenuItemContainer - nice to have but not available on ie6 */
border-color: #ffffff #ffffff #ffffff #ffffff;
border-width:0px;
border-style: none none none none;
#MenuBar.MenuBar .SubMenuVisible {/* For Horizontal menubar only */
top: 100%; /* 100% is at the bottom of parent menuItemContainer */
left:0px; /* 'left' may need tuning depending upon borders or padding applied to menubar MenuItemContainer or MenuItem,
     and your personal taste.
     0px will left align the dropdown with the content area of the MenuItemContainer. Assuming you keep the margins 0
     on MenuItemContainer and MenuItem on the parent
     menubar, making this equal the sum of the MenuItemContainer & MenuItem padding-left will align
     the dropdown with the left of the menu item label.*/
z-index:10;
#MenuBar.MenuBarVertical .SubMenuVisible {
top: 0px;
left:100%;
min-width:0px; /* Do not neeed to match width to parent MenuItemContainer - items will prevent total collapse */
/* Submenu properties -- Second level submenu and beyond - these are visible descendents of .MenuLevel1 */
#MenuBar .MenuLevel1 .SubMenuVisible {
background-color: #ffffff;
min-width:0px; /* Do not neeed to match width to parent MenuItemContainer - items will prevent total collapse*/
top: 0px; /* If desired, you can move this down a smidge to separate top item''s submenu from menubar -
    that is really only needed for submenu on first item of MenuLevel1, or you can make it negative to make submenu more
    vertically 'centered' on its invoking item */
left:100%; /* If you want to shift the submenu left to partially cover its invoking item, you can add a margin-left with a
    negative value to this rule. Alternatively, if you use fixed-width items, you can change this left value
    to use px or ems to get the offset you want. */
/* IE6 rules - you can delete these if you do not want to support IE6 */
/* A note about multiple classes in IE6.
* Some of the rules above use multiple class names on an element for selection, such as "hover" (MenuItemHover) and "has a subMenu" (MenuItemWithSubMenu),
* giving the selector '.MenuItemWithSubMenu.MenuItemHover'.
* Unfortunately IE6 does not support using mutiple classnames in a selector for an element. For a selector such as '.foo.bar.baz', IE6 ignores
* all but the final classname (here, '.baz'), and sets the specificity accordingly, counting just one of those classs as significant. To get around this
* problem, we use the plugin in SpryMenuBarIEWorkaroundsPlugin.js to generate compound classnames for IE6, such as 'MenuItemWithSubMenuHover'.
* Since there are a lot of these needed, the plugin does not generate the extra classes for modern browsers, and we use the CSS2 style mutltiple class
* syntax for that. Since IE6 both applies rules where
* it should not, and gets the specificity wrong too, we have to order rules carefully, so the rule misapplied in IE6 can be overridden.
* So, we put the multiple class rule first. IE6 will mistakenly apply this rule. We follow this with the single-class rule that it would
* mistakenly override, making sure the misinterpreted IE6 specificity is the same as the single-class selector, so the latter wins.
* We then create a copy of the multiple class rule, adding a '.SpryIsIE6' class as context, and making sure the specificity for
* the selector is high enough to beat the single-class rule in the "both classes match" case. We place the IE6 rule at the end of the
* css style block to make it easy to delete if you want to drop IE6 support.
* If you decide you do not need IE6 support, you can get rid of these, as well as the inclusion of the SpryMenuBarIEWorkaroundsPlugin.js script.
* The 'SpryIsIE6' class is placed on the HTML element by the script in SpryMenuBarIEWorkaroundsPlugin.js if the browser is Internet Explorer 6. This avoids the necessity of IE conditional comments for these rules.
.SpryIsIE6 #MenuBar .MenuBarView .MenuItemWithSubMenuHover .MenuItemLabel /* IE6 selector */{
background-color: #333333; /* consider exposing this prop separately*/
color: #ffffff;
.SpryIsIE6 #MenuBar .MenuBarView .SubMenu .MenuItemWithSubMenuHover .MenuItemLabel/* IE6 selector */{
background-color: #666666; /* consider exposing this prop separately*/
color: #ffffff;
.SpryIsIE6 #MenuBar .SubMenu .SubMenu /* IE6 selector */{
margin-left: -0px; /* Compensates for at least part of an IE6 "double padding" version of the "double margin" bug */
SpryMenuBasic.css
/* SpryMenuBasic.css - version 0.5 - Spry Pre-Release 1.7 */
/* Copyright (c) 2010. Adobe Systems Incorporated. All rights reserved. */
/* This is the css for a basic Spry 2 MenuBar.
* The first section is basic layout, and should in general not need to be modified.
* The final section of this file specifies images to use for arrows for the menu. These
* are either down or right-pointing as required by horizonatal or vertical layouts. You
* can either replace the referenced images with your own, or you can modify these rules to
* point to your won images.
* These rules are supplemented by those specified in the OAM file for inclusion in the html document,
* or alternatively, the file SpryMenuBarBasicSkin.css which is included with this widget. */
/* Resets for ul and li in menus */
.MenuBar .MenuBarView, .MenuBar .SubMenuView {
display:block;
list-style:none;
margin:0;
padding:0;
/*** Layout Rules for Basic Menu ***/
/* Top Level MenuBar
* Because we float the MenuItemContainers in the MenuBar, we have to make sure the menubar wrapper expands to hold them all.
* The simplest way is to float the widget wrapper
.MenuBar { /* overridden by .MenuBarVertical version of this rule */
float:left;
width:100%;
.MenuBarVertical {
float:left; /* Used to make menubar shirink to fit contents */
width:auto;
/* SubMenus */
.MenuBar .SubMenu {
display:block;
position:absolute;
top:0;
left:-10000px; /* By default, all non-visible submenus are hidden by moving way to the west */
padding:0;
/* First level of submenus - pulls down from horizontal menubar, right from vertical */
.MenuBar .SubMenuVisible{ /* overridden by .MenuBarVertical version of this rule */
top:100%;
left:0px;
.MenuBarVertical .SubMenuVisible {
top:0px;
left:100%;
/* All submenus below level 1. All pullout to the right */
.MenuBar .SubMenu .SubMenuVisible {
display:block;
position:absolute;
top:0px;
left:100%;
/* MenuItems, MenuItemLabels, and MenuItemContainers */
.MenuBar .MenuItem {
display:block;
text-decoration:none;
.MenuBar .MenuItemLabel {
display:block;
.MenuBar .MenuItemContainer {
position:relative;
white-space:nowrap;
float:left; /* overridden by .MenuBarVertical version of this rule */
display:block;
margin:0;
padding:0;
.MenuBarVertical .MenuItemContainer {
float:none;
.MenuBar .SubMenu .MenuItemContainer {
float:none;
/* Layout Rules needed by IE6 - excluded from other browsers */
.SpryIsIE6 .SubMenu .SubMenu {
width:100px;
height:1%;
.SpryIsIE6 .MenuBar .SubMenuVisible .SubMenuVisible {
width:auto;
/* End Layout section */
* Arrows - This section specifies arrow images for a submenu dropdowns in Basic SpryMenu.
.MenuBar .MenuItemLabel{
background-image:none;
/* For all arrows used here, we depend upon the image to push itself away from right edge, or the user can add right padding to the MenuItem */
.MenuBar .MenuItemWithSubMenu .MenuItemLabel{
background-image:url("images/ArrowMenuDownGrey.gif");
background-position:right center;
background-repeat:no-repeat;
.MenuBar .MenuItemHover.MenuItemWithSubMenu .MenuItemLabel{
background-image:url("images/ArrowMenuDownWhite.gif");
background-position:right center;
background-repeat:no-repeat;
.MenuBarVertical .MenuItemHover.MenuItemWithSubMenu .MenuItemLabel{
background-image:url("images/ArrowMenuRight.gif");
background-position:right center;
background-repeat:no-repeat;
.MenuBarVertical .MenuItemWithSubMenu .MenuItemLabel{
background-image:url("images/ArrowMenuRight.gif");
background-position:right center;
background-repeat:no-repeat;
.MenuBar .SubMenu .MenuItemWithSubMenu .MenuItemLabel{
background-image:url("images/ArrowMenuRight.gif");
background-position:right center;
background-repeat:no-repeat;
.MenuBar .SubMenu .MenuItemHover.MenuItemWithSubMenu .MenuItemLabel{
background-image:url("images/ArrowMenuRight.gif");
background-position:right center;
background-repeat:no-repeat;
/* IE6 rules for Arrows */
.SpryIsIE6 .MenuBar .MenuItemWithSubMenuHover .MenuItemLabel{
background-image:url("images/ArrowMenuDown.gif");
background-position:right center;
background-repeat:no-repeat;
.SpryIsIE6 .MenuBarVertical .MenuItemWithSubMenuHover .MenuItemLabel{
background-image:url("images/ArrowMenuRight.gif");
background-position:right center;
background-repeat:no-repeat;
.SpryIsIE6 .MenuBar .SubMenu .MenuItemWithSubMenuHover .MenuItemLabel{
background-image:url("images/ArrowMenuRight.gif");
background-position:right center;
background-repeat:no-repeat;

I love your subject line
Spry Menu 2.0 issues in IE7..   yes another one!
It is us as designers/developers that need to create websites for all current browsers. No sense in blaming the browsers, although in this case we could blame Spry Menu 2.0.
Problem with that is that Spry Menu 2.0 has been successfully tested in all modern browsers.
This leaves us with just one possibility, the designer/developer has erred somewhere along the line. After having checked the support files (JS and CSS) and looked at the markup, we now go to the constructor and see the following
var MenuBar = new Spry.Widget.MenuBar2("#MenuBar", {
    widgetID: "MenuBar",
    widgetClass: "MenuBar MenuBarLeftShrink",
    insertMenuBarBreak: true,
A comma after the last value.
I also am wondering why there are two css pages for the menu bar.??
One is the standard CSS for the menubar and under normal circumstances, should not be touched; the other is for the convenience of the designer/developer so that he/she can tweak the menubar to suit. If you wish, you can combine both. In all cases, keep in mind that the CSS for the standard (basic) menubar should come first, so that the other CSS can override the first.
This needs to be corrected in your document
Gramps

My form has a list of yes or no questions. I want to use either cheboxes or radio buttons. I can't make it work. When I check yes for one question, it marks all yes answers for all other questions. If I mark some radio buttons to answer, it unmarks la

My form has a list of yes or no questions. I want to use either cheboxes or radio buttons. Unfortunatly I can't make it work. When I check yes for one question, it marks all yes answers for all other questions. If I mark some radio buttons to answer, it unmarks later. Need immediate help!!!

Is it that you are using a PDF-based form? Did you copy and paste the Yes/No fields all the way down your form? If so, then all of the yes/no boxes are copies of each other and have the same name and properties in the PDF.
For example, if you had:
     Question 1 and Question 1 Yes/No checkboxes
     Question 2 and Question 1 Yes/No checkboxes
     Question 3 and Question 1 Yes/No checkboxes
     Question 4 and Question 1 Yes/No checkboxes
Then whatever answer you selected in Question 1 would populate down through the rest of the form.
Changing the Yes/No field properties in questions two through four would eliminate the problem.
I hope that helps,
Brian

Trying to hard wire 2nd mac using another airport extreme

Ok. i currently have an airport express(in my kitchen)that i use with my ibook (wirelessly) and everything works great.
The problem is that i have another mac that is upstairs that i wish to have hooked up as well via LAN. (i have to do it this way because it is an old imac that supports the old wireless card and requires a cradle.)
I would prefer to buy another airport express but was informed that it would not work that way.
Is this true?
How can i do this?
thanks.

Henry,
First I want to Thank you for all you help on many matters.
I am having a problem and i'm hoping you can help.
I bought my 2nd airport express and put it upstairs in my house next to an i mac that does not have a wireless card.
My airport downstairs is connected to my cable modem and is already acting wireless to my ibook.
I want to be able to connect an ethernet wire to the imac from the second airport express, while the airport express is picking up the wireless signal from downstairs.
In the past you have said this can be done.
How can this be done? Is there some sort of link or
instructions you can point me too?
I don't know how to do this and i'm not sure if it needs to be set-up as a bridge, or client. (are these two the same thing?)
Sorry to be so dumb, but i guess i'm one of those people that need direction step by step.
Thanks in advance for any help you may be able to provide.
Scott

HT4145 I have an Airport Extreme bas station now and I want to know if I can use an Airport Express to extend my network or do I have to use another Airport Extreme base.

I have an Airport Extreme Base Station now and I would like to know if I can use an Airport Express to extend my wifi network or do I have to use another Airport Extreme Base Station.

This AirPort Express:
http://www.apple.com/airportexpress/
It is the only Express with 2 Ethernet ports. All others are "old"
Apple does not specify a model number in their product information, but it is A1392 in the U.S. I do not know if Apple uses different model numbers in other countries.

I am trying to extend my airport extreme signal to another airport extreme can this be done? I have tried several time using the automated set up but it keeps failing... What am I doing wrong?

I am trying to extend my airport extreme signal to another airport extreme can this be done? I have tried several time using the automated set up but it keeps failing... I have selected every possible security/password encryption level... What am I doing wrong? If it os possible where can I find step by step instructions? Please & Thank you!

The challenge with the older round AirPort Extremes are that they are "g" wireless devices.
When you configure them for WDS, the speed on the wireless network is cut in half...and probably will not have the bandwidth required to stream video reliably from either AirPort Extreme since both are affected by the WDS setup.
There is not an "automated" setup for WDS. You have to do this manually on both AirPort Extremes. Unfortunately, it is not an easy configuration and it's easy to make a mistake and hard to recover without starting all over again.
Apple's instructions for WDS are here if you want to give it a try.
http://support.apple.com/kb/HT4262
It is possible that it might work. Keep us posted on your progress
Adding a single AirPort Express will unfortunately not help. You have to have "n" wireless devices at all router points.

Can an airport extreme base station attached to another airport extreme base station as an extender transmit a different network name and have it's own security?

Can an airport extreme base station attached to another airport extreme base station set up as an extender transmit a different network name and have it's own security?

No. The AirPort cannot extend another AirPort's wireless network and simultaneously broadcast its own wireless network.
It can however, be connected to another router (including another AirPort) by Ethernet, and then, be configured to broadcast a wireless network with another Network Name and Security Type.

Extending airport express wireless network with another airport express

I am trying to set up another airport express to my existing airport express at home so I can extend the wireless range and also to connect my printer (to my second airport express) so I can have a shared wireless printer. Is this possible? If so, can someone assist me on how to set this up?
Thanks.

Try the following ...
AirPort Express Base Station (AX) - WDS Setup
"Factory Reset" the AX base stations
o (ref: http://docs.info.apple.com/article.html?artnum=108044)
(Note: To facilitate setting up the base stations, place them in near proximity of each other during the setup phase. Also record the Apple IDs of each base station that will included in the WDS as these will be required during setup.)
Main Base Station Setup
(Note: The AX connected to the Internet will be assumed to be the main base station in the WDS.)
Either connect to the AX's wireless network or by temporarily connecting directly, using an Ethernet cable, to the Ethernet port of the AX, and then use the AirPort Admin Utility to make the following settings.
WDS Tab
1. Enable this base station as a WDS: main base station (checked)
2. Allow wireless clients on this base station (checked)
3. Click "+" to add Remote/Relay Base Stations.
3a. Select the Base Station that you want to be the WDS Remote/Relay.
3b. AirPort ID: <verify that this is the correct MAC address for the Base Station you are adding as a Remote/Relay.>
3c. Auto configure as a WDS remote base station (checked)
3d. Click "OK."
4. Verify that the Remote/Relay Base Station has been added to the list.
5. Click "Update," and then verify the settings for the Remote/Relay.
5a. Allow wireless clients on this base station (checked)
5b. New network name: <verify that this is the same as the network name as the main base station>
5c. TCP/IP: Configure using DHCP
5d. Base Station Password: <the Remote/Relay Base Station password>
5e. Confirm: <same as previous step>
5f. Click "OK."

Another simple questions

Hello friends:
Another simple question: I need to learn things about Oracle on my desktop.
My machine runs Windows 98. Oracle has some desktop product of its Database Line?
For example: Oracle Personal?
And Oracle Lite? What's the main difference between Oracle Personal and
Oracle Lite?
Thank You
Gracias
Ing. Pablo Romero
CORDOBA ARGENTINA

1. I didn't know the answer to your first question, but I googled it and it says the item is the in-call audio boost.
http://forums.crackberry.com/f71/flag-icon-47659/
2. isn't this setting determined by the carrier? So it's not a setting in the phone, but when you call in to your voicemail you can change your options?

Memory question (yes, another)

ok, i have ddr memory rated for 200mhz, and the fsb of my processor is 333 mhz.
i was reading a thread on a corsair forum from a guy with my exact motherboard
AND memory, but a slightly lesser processor (a-xp 2500 vs a-xp2800, both barton333)
he says:
1. Motherboard is as started above: MSI K7N2 Delta2-LSR
2. Processor is Athlon XP 2500+ Barton (333 FSB)
3. CPU multiplier is unlocked so I can alter RAM to 200FSB and lower multiplier to
ensure that speed is the same.
4. Running Dual Channel mode.
i know a 1:1 ratio is best, but to GET such a ratio, is there any practical difference
between:
a) setting the memory to 166 and the ratio (manually) to 1:1
b) setting the memory to 200 and reducing the multiplier, as he's done.
i assume by multiplier he means the fsb:dram ratio - please correct me if i'm wrong.
thanks!

Quote from: Grayone on 27-December-05, 03:39:37
Having the cpu multiplier unlocked does nothing to affect the memory speed.
after closer reading, he says he's running at 2.3 ghz, by changing his processor to
200mhz * 11. something i definitely don't want to do even with my 2800!
with that in mind, i think he meant in terms of upping the processor to match
the memory (or buying faster memory to match his already oc/d psu) - and my
question is moot, for my purposes. (feel free to delete!)

Another STUPID question from the Hoss; Firmware updating , Yes or No?

I've gotten conflicting input from persons whom I consider to be far more Knowledgeable in their Geekness than am I.
Let me lead off by saying that they are ALL very long-term Mac-ers, these are the people who convinced me to dive into Lake Cuppertino!
One "faction" advises to NOT install the firmware updates, that they are a risky proposition, that the computer is best off with the firmware installed with it's build.
The other group says that Apple wouldn't encourage us to update the firmeware if it wasn't safe and good and generally wholesome for our computers.
My experience with this thus far; The ONE time I did be all brave and studly and do the firmware update, it froze my computer so badly that I ended up having to make the 90-minute,(one way), journey to the Apple store and hand it over to the resident Genius.
Fortunately, it was the 15 minute fix, as opposed to the alternate possibility, which requires, apparently, 3 days.
So I was left with the feeling that the nay-sayers are indeed correct.
And I have some trepidation in risking it again, because I REALLY REALLY need my 'puter working, don't have so much time for driving a majillion miles to get, either a 15 minute, or a,(possibly), 3 days fix.
What can you folks tell me about this?
Does a significant interval between the inception firmware and the update you finally decide to install exacerbate the risky-ness of doing it?
Is there a point where you absolutely MUST update the firmware?
What causes the brick-ness after the install?
I am certain that there are MANY differing opinions and experiences.
I will appreciate any responses that may help to make this all clearer to me!
THANKS, And CHEERS!

More than likely because they got bit when doing one or are paranoid from reading these "emergency room" episodes. That's the beauty of having multiple, bootable clones. You can do the updates on one and test to see if there are any pitfalls. This is my standard advice before updating/upgrading/installing new stuff.
Get a bootable, external HD (preferably FireWire, since it's 40-50% faster than USB 2 and designed for data transfers), make a bootable backup/clone before updating/upgrading, and ensure that it's bootable and works like the original. That allows you to revert to the previous good state without having to reinstall or reset anything. See these for details:
http://docs.info.apple.com/article.html?artnum=106941
http://www.macmaps.com/upgradefaq.html
http://www.macmaps.com/backup.html
http://www.thexlab.com/faqs/installswupdates.html
http://www.thexlab.com/faqs/backuprecovery.html
If you only have a Time Machine backup, ensure that you can reliably restore it to another disk/volume/partition before updating/upgrading.

New imac with 10.6.5, epson cx7800 not printing, yes another question

Hu,
As stated, I just bought a new imac and am unable to print, getting this message:
Wednesday, December 8, 2010 5:53:06 AM America/Denver
E [08/Dec/2010:05:53:25 -0700] [Job 12] Job stopped due to filter errors; please consult the error_log file for details.
D [08/Dec/2010:05:53:25 -0700] [Job 12] The following messages were recorded from 05:53:24 to 05:53:25
D [08/Dec/2010:05:53:25 -0700] [Job 12] Job restarted by user.
D [08/Dec/2010:05:53:25 -0700] [Job 12] job-sheets=none
D [08/Dec/2010:05:53:25 -0700] [Job 12] argv[0]="Stylus_CX7800"
D [08/Dec/2010:05:53:25 -0700] [Job 12] argv[1]="12"
D [08/Dec/2010:05:53:25 -0700] [Job 12] argv[2]="gregwargo"
D [08/Dec/2010:05:53:25 -0700] [Job 12] argv[3]="Ginger Bars"
D [08/Dec/2010:05:53:25 -0700] [Job 12] argv[4]="1"
D [08/Dec/2010:05:53:25 -0700] [Job 12] argv[5]="APColorMatchingMode=APVendorColorMatching APDInputSlot= nocollate com.apple.print.DocumentTicket.PMSpoolFormat=application/pdf com.apple.print.JobInfo.PMApplicationName=Preview com.apple.print.JobInfo.PMJobName=Ginger\ Bars com.apple.print.JobInfo.PMJobOwner=Greg\ Wargo nocom.apple.print.PageToPaperMappingAllowScalingUp..b. com.apple.print.PageToPaperMappingMediaName=na-letter com.apple.print.PageToPaperMappingType..n.=1 com.apple.print.PrinterInfo.PMColorDeviceID..n.=6744 com.apple.print.PrintSettings.PMColorSyncProfileID..n.=1 com.apple.print.PrintSettings.PMCopies..n.=1 com.apple.print.PrintSettings.PMCopyCollate..b. com.apple.print.PrintSettings.PMDestinationType..n.=1 com.apple.print.PrintSettings.PMFirstPage..n.=1 com.apple.print.PrintSettings.PMLastPage..n.=2147483647 com.apple.print.PrintSettings.PMPageRange..a.0..n.=1 com.apple.print.PrintSettings.PMPageRange..a.1..n.=2147483647 DestinationPrinterID=Stylus_CX7800 media=na-letter PaperInfoIsSuggested..b. noPDFIsProtected..b. pserrorhandler-requested=standard job-uuid=urn:uuid:8abaf296-ebe1-3365-70ea-70ed96a97afc job-originating-host-name=localhost time-at-creation=1291769861 time-at-processing=1291812804 job-impressions=1 com.apple.print.PrintSettings.PMTotalSidesImaged..n.=1 com.apple.print.PrintSettings.PMTotalBeginPages..n.=1 PageSize=na-letter"
D [08/Dec/2010:05:53:25 -0700] [Job 12] argv[6]="/private/var/spool/cups/d00012-001"
D [08/Dec/2010:05:53:25 -0700] [Job 12] envp[0]="<CFProcessPath>"
D [08/Dec/2010:05:53:25 -0700] [Job 12] envp[1]="CUPS_CACHEDIR=/private/var/spool/cups/cache"
D [08/Dec/2010:05:53:25 -0700] [Job 12] envp[2]="CUPS_DATADIR=/usr/share/cups"
D [08/Dec/2010:05:53:25 -0700] [Job 12] envp[3]="CUPS_DOCROOT=/usr/share/doc/cups"
D [08/Dec/2010:05:53:25 -0700] [Job 12] envp[4]="CUPS_FONTPATH=/usr/share/cups/fonts"
D [08/Dec/2010:05:53:25 -0700] [Job 12] envp[5]="CUPS_REQUESTROOT=/private/var/spool/cups"
D [08/Dec/2010:05:53:25 -0700] [Job 12] envp[6]="CUPS_SERVERBIN=/usr/libexec/cups"
D [08/Dec/2010:05:53:25 -0700] [Job 12] envp[7]="CUPS_SERVERROOT=/private/etc/cups"
D [08/Dec/2010:05:53:25 -0700] [Job 12] envp[8]="CUPS_STATEDIR=/private/etc/cups"
D [08/Dec/2010:05:53:25 -0700] [Job 12] envp[9]="HOME=/private/var/spool/cups/tmp"
D [08/Dec/2010:05:53:25 -0700] [Job 12] envp[10]="PATH=/usr/libexec/cups/filter:/usr/bin:/usr/sbin:/bin:/usr/bin"
D [08/Dec/2010:05:53:25 -0700] [Job 12] envp[11]="[email protected]"
D [08/Dec/2010:05:53:25 -0700] [Job 12] envp[12]="SOFTWARE=CUPS/1.4.5"
D [08/Dec/2010:05:53:25 -0700] [Job 12] envp[13]="TMPDIR=/private/var/spool/cups/tmp"
D [08/Dec/2010:05:53:25 -0700] [Job 12] envp[14]="USER=root"
D [08/Dec/2010:05:53:25 -0700] [Job 12] envp[15]="CUPS_SERVER=/private/var/run/cupsd"
D [08/Dec/2010:05:53:25 -0700] [Job 12] envp[16]="CUPS_ENCRYPTION=IfRequested"
D [08/Dec/2010:05:53:25 -0700] [Job 12] envp[17]="IPP_PORT=631"
D [08/Dec/2010:05:53:25 -0700] [Job 12] envp[18]="CHARSET=utf-8"
D [08/Dec/2010:05:53:25 -0700] [Job 12] envp[19]="LANG=en_US.UTF-8"
D [08/Dec/2010:05:53:25 -0700] [Job 12] envp[20]="APPLE_LANGUAGE=en-US"
D [08/Dec/2010:05:53:25 -0700] [Job 12] envp[21]="PPD=/private/etc/cups/ppd/Stylus_CX7800.ppd"
D [08/Dec/2010:05:53:25 -0700] [Job 12] envp[22]="RIPMAXCACHE=8m"
D [08/Dec/2010:05:53:25 -0700] [Job 12] envp[23]="CONTENT_TYPE=application/pdf"
D [08/Dec/2010:05:53:25 -0700] [Job 12] envp[24]="DEVICE_URI=file:///dev/null"
D [08/Dec/2010:05:53:25 -0700] [Job 12] envp[25]="PRINTER_INFO=Stylus CX7800"
D [08/Dec/2010:05:53:25 -0700] [Job 12] envp[26]="PRINTER_LOCATION=Degobah2"
D [08/Dec/2010:05:53:25 -0700] [Job 12] envp[27]="PRINTER=Stylus_CX7800"
D [08/Dec/2010:05:53:25 -0700] [Job 12] envp[28]="CUPS_FILETYPE=document"
D [08/Dec/2010:05:53:25 -0700] [Job 12] envp[29]="FINALCONTENT_TYPE=printer/StylusCX7800"
D [08/Dec/2010:05:53:25 -0700] [Job 12] Started filter /System/Library/Printers/Libraries/PrintJobMgr/Contents/MacOS/PrintJobMgr (PID 1566)
D [08/Dec/2010:05:53:25 -0700] [Job 12] Restarted by "gregwargo".
D [08/Dec/2010:05:53:25 -0700] [Job 12] JobManager converting file: /private/var/spool/cups/d00012-001 (7 args)
D [08/Dec/2010:05:53:25 -0700] [Job 12] PrintJobMgr trying ppc architecture...
D [08/Dec/2010:05:53:25 -0700] [Job 12] JobManager converting file: /private/var/spool/cups/d00012-001 (7 args)
D [08/Dec/2010:05:53:25 -0700] [Job 12] fatal::internal error -9660
D [08/Dec/2010:05:53:25 -0700] [Job 12] End of messages
D [08/Dec/2010:05:53:25 -0700] [Job 12] printer-state=3(idle)
D [08/Dec/2010:05:53:25 -0700] [Job 12] printer-state-message="/System/Library/Printers/Libraries/PrintJobMgr/Contents/ MacOS/PrintJobMgr failed"
D [08/Dec/2010:05:53:25 -0700] [Job 12] printer-state-reasons=none
I've uninstalled the software, reinstalled the latest drivers and software, and am still unable to print. The printer is listed as online and ready, but no printing.
any advice is greatly appreciated.
Thanks,
Greg

I have a MacBook Air 11.6" running OSX 10.6.5 and cannot print to my Canon MF4350d attached to my AirPort Express, with printer sharing selected. HAve reinstalled software over and over agin. Turned printer off, unplugged, etc. No luck. Says it cannot find the software for the printer. The computer can "see" where my printer is located, but the printer will not print. Nothing seems to wrk. Any ideas what might be going on and how I can fix it? By the way, I was able to print directly to this printer connected to my computer's USB, but now even when I do this the same problem occurs. ALL ability to print seems to be GONE. COuld it be related to the recent upgrade to OSX 10.6.5?

Yes, another Airport question

Similar Messages

Maybe you are looking for