Yes i get that with f2 screen none of my disk won't work

Download a fixit program and it all try putting 7 ultimit on it and keep getting the damr f2 screen i think a malware sneakef in

Hi @stalliongene200 ,
I have brought your issue to the attention of an appropriate team within HP. They will likely request information from you in order to look up your case details or product serial number. Please look for a private message from an identified HP contact. Additionally, keep in mind not to publically post ( serial numbers and case details).
If you are unfamiliar with how the Forum's private message capability works, you can learn about that here.
Regards,
George
I work for HP

Similar Messages

Lightroom requires me to sign in 3 or 4 times whenever I use it. I get confronted with a screen telling my trial has 00 days left and I must license or sign in to continue. If I simply ignore any of these repeated requests, Lightroom immediately exits

Lightroom requires me to sign in 3 or 4 times whenever I use it.
I get confronted with a screen telling my trial has 00 days left and I must license or sign in to continue.
If I simply ignore any of these repeated requests, Lightroom immediately exits
.This happens whether or not I sign in to Creative Cloud before attempting to launch Lightroom.
My subscription is in good standing and Lightroom/ Photoshop are up to date. There are no earlier versions installed.

From what you report it appears that you have a trial version of Lightroom 5 perpetual license version installed. Subscribing to the Creative Cloud package PS CC and Lightroom will not activate this version. Try the following.
1. Uninstall Lightroom using the OS system normal uninstall process. This will not affect your existing Catalog and user files and but will just remove the Lightroom Application.
2. Reboot your computer.
3. Open the Adobe Creative Cloud Application Manager and it should give you the option to download the latest Lightroom 5 install package. Proceed to download and install this version and it should be activated automatically, no requirement to enter any license key like the Perpetual License version. It will automatically link to your existing Catalog files etc.

My "fn" button is stuck on only revealing mission control in Lion. With this problem none of my "f" keys will work nor can I hold "fn" and delete to delete text in opposite direction. Can someone please help with this?

My "fn" button is stuck on only revealing mission control in Lion. With this problem none of my "f" keys will work nor can I hold "fn" and delete to delete text in opposite direction. Can someone please help with this?

Following the fix here worked for me:
https://discussions.apple.com/message/15680566#15680566
except my plist file was in ~/Library instead of /Library.
-Scott

My iPhone cannot make or receive calls. I tried installing iTunes order to sync everything and restore, but I am getting 0x ... 084 errors, and it won't work. I do not want to delete all of my contacts. Any advice would be appreciated.

My iPhone cannot make or receive calls. I tried installing iTunes order to sync everything and restore, but I am getting 0x ... 084 errors, and it won't work. I do not want to delete all of my contacts. Any advice would be appreciated.

Oh, and I can't hook up my iPhone to iTunes because it's locked with a passcode. I can't begin to type the passcode because of this stupid "Restore Needed - can't send or receive calls" thing. This is beyond silly.

I updated Firefox on my Mac (10.6.8), and now history is not remembered (that option is checked) and the back button won't work. Help?

I updated Firefox on my Mac (10.6.8), and now history is not remembered (that option is checked) and the back button won't work. Help?

A possible cause is a problem with the file places.sqlite that stores the bookmarks and the history.
*http://kb.mozillazine.org/Bookmarks_history_and_toolbar_buttons_not_working_-_Firefox
*https://support.mozilla.org/kb/Bookmarks+not+saved#w_fix-the-bookmarks-file
You can also try to repair the places database with this extension:
*https://addons.mozilla.org/firefox/addon/places-maintenance/

When unlocking my iphone with the camera slide, my volume controls won't work on video playbacks. However, if I unlock the phone normally and open the camera roll I am able to watch my videos and control the volume. Anyone else notice this?

When unlocking my iphone 5 with the camera slide, my volume controls won't work on video playbacks. However, if I unlock the phone normally and open the camera roll I am able to watch my videos with the control of the volume. Anyone else notice this?
Thank you.

Who can help me what are the symbols of a moon and a lock with a partial circle around it not allowing me to turn on or off my phone

Nokia C3-01 get hanged with Touch screen lock

I have been using Nokia c3-01 for the past few months and the firmware is uptodate.(V 7.51) Some time after a call has been disconnected the touchscreen lock will be activated and it will not get unlocked.(The Touch Screen will not respond). The phone has to be restarted by removing and reinserting the battery. Hope this complaint would be solved in the next software update.
Any user facing this problem, please report
Thank You

Hi Almach89,
Welcome to Nokia discussions board!
We are sorry for the inconvenience. I advise yout to try and back up your data with Nokia Suite. If you do not have it installed on your PC yet, you may do so with this link.
Then connect your device to it and go to Tools > Back up. Also go to Synchronise > Synchronise now > All. Once the sync is completed, check the different tabs to see if the data has been correctly synced. If this is successful, your data will now be safe (please use your own judgement).
You may update your device from the updates tab to see if that fixes the screen issue.
Alternatively, please take your device to your nearest Nokia Care Point or call your Local Careline, please find the details via this link.
Feel free to post any other questions you may have.
Regards,
astra2025
Press the 'Accept Solution' icon if I have solved your problem, Kudos my post if my advice has helped you!

Can't get ibook with dead screen to display on a TV

My G3 ibook has a dead screen. I want to make it work like a desktop by using a TV as an external monitor. I have a video output to TV connection adapter cord. I can power up the ibook and I can hear the music CD playing... that makes me think everything is working except for the screen. But no picture comes on the TV after boot up. I have a feeling that a setting called "Video Mirroring" needs to be activated, or no output will go to the TV through the combo S-video/composite adapter cord. But without the ability to see any display on the ibook, how can I activate this setting?, is there an apple command that can be made without seeing any display on the ibook? Please help with any ideas.

I have a video output to TV connection adapter cord. I can power up the ibook and I can hear the music CD playing...
Just to be absolutely clear, which "adapter cord" do you have? If you have the Apple A/V Cable or an iPod A/V Cable plugged into your headphone port, you won't get video through if you have an 800MHz G3 iBook. You will need the Apple Video Adapter (and an s-video or composite video cable). As you've discovered, you can keep your "cord" to get the audio from your headphone port to the TV, though.
-Doug

After installing Maverick my computer, when restarted, only a gray screen appeared. My computer won't work at all...what happened?

After installing Maverick my computer shut down and when it restarted I couldn't get to the home screen. The monitor was grey with some dark grey shapes, it sounded like it was constantly running a program. My computer is sick!! HELP

Take each of these steps that you haven't already tried. Stop when the problem is resolved.
Step 1
The first step in dealing with a startup failure is to secure the data. If you want to preserve the contents of the startup drive, and you don't already have at least one current backup, you must try to back up now, before you do anything else. It may or may not be possible. If you don't care about the data that has changed since the last backup, you can skip this step.
There are several ways to back up a Mac that is unable to start. You need an external hard drive to hold the backup data.
a. Start up from the Recovery partition, or from a local Time Machine backup volume (option key at startup.) When the OS X Utilities screen appears, launch Disk Utility and follow the instructions in this support article, under “Instructions for backing up to an external hard disk via Disk Utility.”
b. If you have access to a working Mac, and both it and the non-working Mac have FireWire or Thunderbolt ports, start the non-working Mac in target disk mode. Use the working Mac to copy the data to another drive. This technique won't work with USB, Ethernet, Wi-Fi, or Bluetooth.
c. If the internal drive of the non-working Mac is user-replaceable, remove it and mount it in an external enclosure or drive dock. Use another Mac to copy the data.
Step 2
If the startup process stops at a blank gray screen with no Apple logo or spinning "daisy wheel," then the startup volume may be full. If you had previously seen warnings of low disk space, this is almost certainly the case. You might be able to start up in safe mode even though you can't start up normally. Otherwise, start up from an external drive, or else use either of the techniques in Steps 1b and 1c to mount the internal drive and delete some files. According to Apple documentation, you need at least 9 GB of available space on the startup volume (as shown in the Finder Info window) for normal operation.
Step 3
Sometimes a startup failure can be resolved by resetting the NVRAM.
Step 4
If you use a wireless keyboard, trackpad, or mouse, replace or recharge the batteries. The battery level shown in the Bluetooth menu item may not be accurate.
Step 5
If there's a built-in optical drive, a disc may be stuck in it. Follow these instructions to eject it.
Step 6
Press and hold the power button until the power shuts off. Disconnect all wired peripherals except those needed to start up, and remove all aftermarket expansion cards. Use a different keyboard and/or mouse, if those devices are wired. If you can start up now, one of the devices you disconnected, or a combination of them, is causing the problem. Finding out which one is a process of elimination.
Step 7
If you've started from an external storage device, make sure that the internal startup volume is selected in the Startup Disk pane of System Preferences.
Start up in safe mode. Note: If FileVault is enabled, or if a firmware password is set, or if the startup volume is a Fusion Drive or a software RAID, you can’t do this. Post for further instructions.
Safe mode is much slower to start and run than normal, and some things won’t work at all, including wireless networking on certain Macs.
The login screen appears even if you usually log in automatically. You must know the login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
When you start up in safe mode, it's normal to see a dark gray progress bar on a light gray background. If the progress bar gets stuck for more than a few minutes, or if the system shuts down automatically while the progress bar is displayed, the startup volume is corrupt and the drive is probably malfunctioning. In that case, go to Step 10. If you ever have another problem with the drive, replace it immediately.
If you can start and log in in safe mode, empty the Trash, and then open the Finder Info window on the startup volume ("Macintosh HD," unless you gave it a different name.) Check that you have at least 9 GB of available space, as shown in the window. If you don't, copy as many files as necessary to another volume (not another folder on the same volume) and delete the originals. Deletion isn't complete until you empty the Trash again. Do this until the available space is more than 9 GB. Then restart as usual (i.e., not in safe mode.)
If the startup process hangs again, the problem is likely caused by a third-party system modification that you installed. Post for further instructions.
Step 8
Launch Disk Utility in Recovery mode (see Step 1.) Select the startup volume, then run Repair Disk. If any problems are found, repeat until clear. If Disk Utility reports that the volume can't be repaired, the drive has malfunctioned and should be replaced. You might choose to tolerate one such malfunction in the life of the drive. In that case, erase the volume and restore from a backup. If the same thing ever happens again, replace the drive immediately.
This is one of the rare situations in which you should also run Repair Permissions, ignoring the false warnings it may produce. Look for the line "Permissions repair complete" at the end of the output. Then restart as usual.
Step 9
Reinstall the OS. If the Mac was upgraded from an older version of OS X, you’ll need the Apple ID and password you used to upgrade.
Step 10
Do as in Step 9, but this time erase the startup volume in Disk Utility before installing. The system should automatically restart into the Setup Assistant. Follow the prompts to transfer the data from a Time Machine or other backup.
Step 11
This step applies only to models that have a logic-board ("PRAM") battery: all Mac Pro's and some others (not current models.) Both desktop and portable Macs used to have such a battery. The logic-board battery, if there is one, is separate from the main battery of a portable. A dead logic-board battery can cause a startup failure. Typically the failure will be preceded by loss of the settings for the startup disk and system clock. See the user manual for replacement instructions. You may have to take the machine to a service provider to have the battery replaced.
Step 12
If you get this far, you're probably dealing with a hardware fault. Make a "Genius" appointment at an Apple Store, or go to another authorized service provider.

Zoom keyboard shortcut won't work with "Italian Pro" keyboard, Zoom keyboard shortcut won't work with "Italian Pro" keyboard

Hi everyone,
I am trying to get to the bottom of this mystery. "Italian Pro" is the keyboard I use almost all the time, and for some reason this zoom shortcut won't work. Another user assured me that "cmd-+" is the shortcut also in that keyboard. Mine doesn't work though. I have tried removing the keyboard and reapplying it. I've tried to use it on different browsers and different applications. I've even created another user and logged into that, installing the keyboard there. Nothing has worked, so can anyone suggest anything? What do I do next? (I know it doesn't seem like much but the issue really interferes with the flow of my things) Thank you!
Joachim

enggopah wrote:
"Italian Pro" is the keyboard I use almost all the time
Is Italian Pro
a. the keyboard, or,
b. the keyboard layout
you use all the time?
for some reason this zoom shortcut won't work.
What zoom are you talking about?
The View > Zoom In command in Safari or Preview?
The Universal Access > Zoom In function?
The Zoom In command in some other app, eg, InDesign?
Some other Zoom entirely?
Another user assured me that "cmd-+" is the shortcut also in that keyboard.
If we're talking about (b) and (1), then this 'other user' (his initials wouldn't be TG, would it?) was right. My keyboard is US QWERTY, and, if I switch to Italian Pro, ⌘-+ works. However, as the 'other user' has already told you, to do ⌘-+ with the Italian Pro keylayout on the US QWERTY keyboard, you have to press simultaneously the keys labelled ⌘ and ] -- as you can easily see in Keyboard Viewer.

External HD as Startup Disk won't work after Restoring with Time Machine

Hey all, this seems very simple; very, very simple at that... But I might be overlooking something here:
I recently had a MacBook running the latest OS X Leopard, until my cat decided I didn't need it anymore and added a glass of water to the mix! So after weeks of freaking out and praying... I found myself with a loaner computer, this iMac G5 1.8 GHz, successfully running leopard for the most part.
Here's the good news: I had Time Machine backing up all my files from the MacBook that can't swim. It was backed up on a partitioned 1tb Western Digital hard drive, like 700gb for TM and 300gb for an external HD.
What I am trying to accomplish is to use the TM backups from the 700gb side to "restore" the system onto the other 300gb external HD side, and use this is the main disk on my iMac G5.
So far, after a 7 and a half restoring session with my Leopard install disc, I think the 300gb external HD is prepped and ready to go, but I can't select that HD as a startup disk, and when I first restarted after the restoring session with my Leopard disc, the startup disk I wanted was "not found" and it quickly went back to the 80gb iMac internal drive. HELP!
Maybe this isn't possible because I'm backing up and installing onto the same HD?

So far, this is where I am at... and I think I'm on the right track!
I don't care what is on this loaner computer (it's one of those... you know, "long-term" loans from my parents...) So I reinstalled Leopard, fresh install. I had an option of restoring from Time Machine, and then I realized I'd be restoring to the wrong disk, so why not install Leopard onto my external partitioned HD that I have been wanting this whole time?
Looking closer, apparently I need to completely repartition my WD external hard drive with an Apple Partition Map because I'm using it with my Power PC-based iMac G5 (beggars can't be choosers!) If I had an Intel-based Mac, I'd be OK with my partitioned HD that I set up with a GUID Partition Table with my drowned MacBook, right?
So, like I said, I am on the right track... all I'm waiting for is to borrow an addition external HD to shuffle some files around before I can do this right... hopefully. Another question: am I able to duplicate my Time Machine Backup HD to another external HD? Or will I have to get really creative or "ghetto" in my attempts to bring one restore of my past computer?
Thanks for all your help and support! And to answer the other question so far, all my HDs are connected via firewire. Thanks!!
-kevin
Message was edited by: Kevin Cramblet

I downloaded Firefox 4, have a Mac Powerbook G4 with OS X and firefox downloads, but opens with an X on the symbol and won't work, says architecture won't support - what is up?

Have tried 4 times to download Firefox 4 and each time it seems to be working OK, but when I go to move the firefox symbol onto the Application symbol, the firefox symbol has an X in an O indicating that it won't work and doesn't. Note says that the architecture won't support the new download. Can I get the update and if so, how? Dave Morrison

Firefox 4 doesn't run on a PowerPC Mac.
Firefox 4 requires at least OS X 10.5 and an Intel Mac.
* http://www.mozilla.com/firefox/4.0/system-requirements/
For Mac OS X 10.4.11 or Mac OS X 10.5.8 you can look at:
* http://www.floodgap.com/software/tenfourfox/
Firefox 3.6.x can be found here:
* http://www.mozilla.com/en-US/firefox/all-older.html

In Windows 7 Itunes loads and runs fine. When I close it down and try to get back in it just sits there. It won't work until I reboot the computer.

I am running WIndows7. I boot up load itunes and it runs fine.. all aspects.
When I close it down and try to get back in later it just sits there. It won't work until I reboot the computer.
I have updated and reloaded several times. Nothing

Let's see whether this file APSDaemon.exe is the problem here.
Close your iTunes.
Press Ctrl-Alt-Del key and choose Task Manager. In the "Processes" Tab, select the file APSDaemon.exe and click End Prosses button, then close the task manager window.
Now open itunes and see if it is working?
If that works, make sure you do this below to prevent same problem after restarting windows:
Go to. START button, type in
MSCONFIG
Hit ENTER
Click STARTUP Tab, Uncheck "Apple Push", click OK.
Restart Windows.

HT1146 Just started using Apple mail. Trying to set up email folders with Company/Company P.O. and it won't work. Went to Edit and added special characters and it still won't work. What am I doing wrong or can this not be done.

Just started using apple mail. Trying to set up email folders with example: Company/Company P.O. It won't let me do it. It will not allow / or . . What am I doing wrong or can this not be done. I tried to use the Edit menu and adding the special characters, but it still won't work. Please advise. mmather

HT4061 My iPad 2 crashed when I was upgrading from 7.02 to 7.04. I have tried to reset the iPad several times, but it does not come back. It gets stuck with a screen that shows iTunes in the middle with a graphic showing the adapter cord with an arrow

What do I do now to restore without looking all my data, photos and settings?

Did you do a backup before you did the iOS update. You should always do this in case of problems. Otherwise your data/files my be lost.
If you can't update or restore your iOS device
http://support.apple.com/kb/ht1808http://support.apple.com/kb/ht1808
 Cheers, Tom

Yes i get that with f2 screen none of my disk won't work

Similar Messages

Maybe you are looking for