Yes!!! I popped out my unlimited data sim from my verizon iPhone 5 into my new mini T Mobile and it worked like a charm

So excited. Now I have unlimited date on my new iPad mini. Plus free 200 mb from t mobile.

Good for you. That just might help others.
Enjoy it!

Similar Messages

HT1316 Can i put my SIM card from my old iphone 5 into my new Iphone 5 i just purcahed? And will my phone start working?

Can i put my SIM card from my old iphone 5 into my new Iphone 5 i just purcahed? And will my phone start working?

Yes all of the iPhone 5 family use the nano sim, so as long as you did not switch to a phone locked to another network it will work. But you do need to go through the activation/setup procedure with tHat sim.

If I buy a new iPhone 3GS on eBay, can I transfer the SIM card from my current iPhone 3GS into the new one and will it still work?

I have an 8GB iPhone 3GS on AT&T, and I wanted to purchase a 16GB version on eBay. Will I be able to just pop the SIM card out of the current iPhone 3GS into the new iPhone 3GS and have it work properly?

Yes, you will be able to use it provided that the 16GB version of 3GS is either factory unlocked or locked to AT&T network (in case of a carrier locked phone).

Can I move my Sim from my old IPhone 3G to my new Iphone4?

I don't have my new iPhone4 yet, but it's on it's way. When it gets here, is it fine to move the existing sim from my 3G to my iPhone 4? Any gotchas?
Also, if I want to pass my older iPhone to my wife (who owns a POS Samsung) how do I go about doing that? Simple Sim swap too? And what if (for some strange reason) she doesn't want the iphone but would like to use it as a Apple Touch? Do able? How?
Thanks!
Jay

Your new iphone "should" come with a micro-sim pre-installed. If it doesn't, you will want to obtain one from your carrier as you need to leave your old sim in your 3G. Things will be easier & work better for you if you do things this way.
This article details how to setup your old phone for someone else to use it with service or as a touch:
http://support.apple.com/kb/HT2109

When I put my iphone 4s into my pocket (pants or coat) and move it around, the phone beeps/makes a tone. I can't figure out what is causing the noise.

I have a strange problem. When I put my iphone 4S into my pocket (pants or coat) and move it around, the phone makes a beep noise/tone. I can't figure out what is causing the noise. It doesn't sound like any of my regular applications. Maybe it is the lock noise but I can't tell for sure. More movement makes more beeps. Even walking with my phone in my pocket creates beeps. The IOS is 7.0.4 (11B554a). Anyone else have this crazy problem?

Try This...
Close All Open Apps... Sign Out of your Account... Perform a Reset...
Reset ( No Data will be Lost )
Press and hold the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears. Release the Buttons.
http://support.apple.com/kb/ht1430
If the issue persists...
Connect to iTunes on the computer you usually Sync with and Restore
http://support.apple.com/kb/HT1414
Make sure you have the Latest Version of iTunes (v11) Installed on your computer
iTunes free download from www.itunes.com/download

I threw out 24 time machine backups from an external hard drive into my desktop trash and now I can't empty my trash.

I threw out 24 time machine backups from an external hard drive into my IMac desktop trash and now I can't empty my trash.

Since you didn't mention what type of error message you were seeing, I'm going to guess on what is happening.
I'm guessing that since you threw away Time Machine backups, that Time Machine is probably active on your Mac. There is a chance then that the files you tossed are marked as in use. You can't delete files that are in use.
Try turning Time Machine off, then restart your Mac. Then try deleting them again.
Once done, turn Time Machine back on.
Tom

I need to transfer all of the data from my old iphone 4s to my new iphone 5

I need simple help to transfer all of the contents from my old iPhone 4s to my new iPhone 5
The Apple Store was unable to assist due to too much data for icloud. I have a MacBook and the cables for each device.
Where to start?
db

Check this link.
http://support.apple.com/kb/HT2109?viewlocale=en_US&locale=en_US

Can I transfer an unlimited data plan from one line to another?

When I upgraded my phone I lost my unlimited data. My wife and I are on a family plan. She still has unlimited data on her line, but rarely uses any data. Is it possible to shift her unlimited data to my line and my 2gb plan to her line?

No. You can't transfer features between the lines on the account.
You could switch which number you use. You start using her phone number and she uses yours.

Can I swap out my sim from an activated 4GB phone to a new 8GB?

I recently bought a new 8GB iPhone (the 4GB just wasn't big enough!). I wanted to know if I could just swap in the old SIM chip and use the phone or if I had to go through the activation process again?

I think since the sim that you will be swapping into the 8gb iphone is already activated then itunes will recognize this and you won't have to go through the original activation process.
When my phone was replaced the guy at the apple store just swapped the sims and quickly did something on the computer. I just had to put in my voice mail pin and that was it.

Can I transfer Time Machine data from two separate hard drives into one new one?

I'm using a MacBook Pro as my primary computer. My 500 gig Time Capsule filled up a year or so ago, so I stopped using it with Time Machine for awhile so I could keep the data from those old back-ups. There were a number of things I deleted from my computer's very limited hard drive after they were backed up to the Time Capsule. I got a 1T external USB drive last year to use as my "filing Cabinet" to store files I didn't necessarily need all the time or that were filling up my small laptop hard drive--including my iTunes library--all organized in a way that made it relatively easy for me to find what I needed, even if I didn't remember exactly when I'd filed it or what I'd called it. I got another 1 terabyte external (portable) drive last July and dedicated it to TimeMachine backups and labeled it "TimeMachine".
Over the last couple of weeks, my friend has been helping me upgrade to Yosemite and clean up my laptop hard drive. Last week he cloned my laptop hard drive to a new 1T hard drive and I exchanged it for my old drive in my computer today. All good.
Here's the issue. We replaced my Time Capsule hard drive with a 1 terabyte drive with the idea of transferring the data from the old Time Capsule (500G) drive and the newer USB 1T "TimeMachine" compact drive to the new 1T Time Capsule drive and beginning using the latter for my Time Machine backups going forward. Originally he thought we could copy everything from each of my external drives (the old 500gig drive from my Time Capsule, the USB "TimeMachine" drive I've been using since July, and the "file cabinet" files) to my computer in their own folders and then start regular TimeMachine backups to the new Time Capsule drive, thus preserving all my old data and making regular backups going forward. The "file cabinet" data was no problem at all, but when I tried to copy my USB "TimeMachine" data to my computer, I was unable to. My friend found instructions for transferring old TimeMachine data to a new TimeCapsule, but I don't know if I can transfer the data from two separate disks to the new TimeCapsule drive. I'm afraid that one set of data will supersede the other and either my newer backups or my old ones will be lost if I try to transfer both.
Are my fears justified or is there a way to insure that no such problem will occur? Of course, my data will still be on those two older drives, but that won't do me a lot of good if I can't access it when I need to. Also, the 1T drive now belongs to my friend; he used a brand new drive he'd bought for himself for my new internal hard drive and plans to take my 1T "TimeCapsule" drive in exchange, once the data has been transferred, so he will, of course, erase that drive.

Should we be able to bring up the old (500G) Time Capsule Drive to rename it using a SATA to FireWire harness and then copy the whole thing to the new Time Capsule drive?
You can copy a whole sparsebundle from one drive to another. That is not a problem. Whether you can access the sparsebundle is something you should test before you even start though.
If it's on the Desktop and I don't tell Time Machine to exclude it from backups, will it just automatically back it up?
All drives you plug into the Mac are excluded by default.. you must include them. So no problems there.. but I hope I am understanding the question.
Will both volumes or directories (which is the right term?) show up when I open Time Machine?
No, Time Machine will only open what it is told to open... or its backup default location.
You can force Time Machine to open alternative/old/no longer used backups by (now I have a problem as things have changed somewhat in Yosemite and I consider it alpha release software at this point in time). The old method was to right click on the TM icon and select a different TM backup. easy. Yosemite seems to have made easy stuff harder.
Here it is on my current computer.. clearly not Yosemite.. Right click on the TM icon in the dock.. select Browse Other Time Machine Disks.. And supply the info of where that is located. Easy. If you cannot figure it out one of the other posters here (with more patience than me for Yosemite) will help you.
Or will we have to partition the new drive somehow--is that even possible?
I am getting more lost as I go down the list.. but the TC disk cannot be partitioned.
If you have included all those USB drives in the new backup on a Time a Time Capsule.. you have made life rather hard because now your files are stored another layer deeper than they were.
So to open a file from a disk you need to open the sparsebundle.. then dig down to the drive in question and then dig down to the backup.. and all of this means Time Machine has to work perfectly which is Yosemite is a very big ask.
I thought you wanted to just backup your old drives to central location.. which means copying the files to a separate folder on the Time Capsule.
One correction I need to make to my post, which will make my strategy make a bit more sense: my new Time Capsule drive is 4T
It makes it much harder.. and I have to pose a real question of long term .. if you have put a 4TB drive in a Gen1 TC.. did you also replace its power supply because I can assure you the drive might be ok but the TC itself will not last forever.. and what happens when it dies. The Gen1 power supply is already well beyond its normal life span and the vast majority are dead. When the backup device is unreliable and the backups on it are made that much harder to get access to.. is this a great plan??
If you are going to consolidate all your old files on one disk.. a task I find understandable. I have done much the same albeit the usefulness of files made on emac running OS9 may be questioned. A disk lying in the bottom of a draw is a more appropriate place for them.
You want those files as easily accessible as possible (at the point of recovery) and not buried inside a sparsebundle.. particularly not a sparsebundle from the old TC disk buried inside a new sparsebundle.. keep files as accessible as possible as you can run searches.. and that is best done on a USB 3 (or faster ie thunderbolt) drive plugged into a new(ish) computer.. not network. And since the files are not being accessed on a daily/weekly or even monthly or yearly basis.. keeping them in actively running TC network storage.. I would say is a waste of space. That is only my opinion of course.. you might consider it highly important that files you will never look at are available any time of day or night when the urge comes to track down that elusive pimpernel email you sent 10 years ago... but I find it hard to justify. What the case.. the problem with TM and things like Mail is you cannot search it.. you must restore the whole library/files/program even before you can access it.. that makes file recovery out of a sparsebundle double step process.
So.. summary.
If you want to store files on the 4TB drive in the TC.. that is not a great strategy but it can work.. simply create a folder named.. OldFilesEMac for instance.. and do a simple copy and paste of all the file to that location. Do not use TM.. Since you have already used TM.. and from what I am reading you have already done the backup with the external drives included.. then you are going to end up needing to erase the TC and start over.. which you may not be prepared to do.. which is fair enough. (I am coming across as overbearing school master.. apologies).
TM is to backup your main OS and current files.. not files from 10-20years ago.
Please do read the issues involved in Pondini..
See his FAQ. I recommend you read through Q14-17 so you understand what is involved in recovery.
http://pondini.org/TM/FAQ.html
I also recommend you read the first couple of articles here. http://pondini.org/TM/Home.html
Particularly so you understand the complexity of Time Machine.
And the articles here. http://pondini.org/TM/Time_Capsule.html
Particularly Q3 on mixing data and backups on a TC.
I wish I could spend an hour or two face to face and work it out.. the whole strategy to do this.. !!

TS3694 Just took my 1st gen iPod out of it's original box, never used before. Plugged it into my new Mac book Pro and it recognizes that the iPod is in recovery mode but when I click to restore, error 1611 comes up - but that error code doesn't say what

I had an 8GB 1st gen iPod in it's original box in storage and just took it out to hook it up. Charged it overnight, plugged it into new Mac Book Pro and it was recognized as being an iPod in recovery but other identifying information was all indicated as "n/a" (so, unknown OS, etc). Error code 1604 came up so I downloaded iTunes on the Mac Book and it is currently showing version 10. But now when I try to restore the iPod, error code 1611 comes up and the troubleshooting doesn't tell me what else to try. The USB connector that came with the iPod was also never used before - brand new also from the box so that should be fine. I also tried a different USB port on the Mac Book. Any ideas?

Error 1611
This error typically occur when security software interferes with the restore and update process. FollowTroubleshooting security software issues to resolve this issue. In rare cases, this error may be a hardware issue. If the errors persist on another computer, the device may need service.

Reinstalled Win 7 Home Pre. have an icon on desk top titled Old Firefox Data, how can I get this info into my new version of Firefox, FAQ's not clear on this.

Read FAQ's but did not see how I was to proceed to restore the data in the Old FireFox Data folder on my desktop. It should hold all of my bookmarks, passwords and other data that I would like to recover into this new install of FireFox.

Look on your desktop. Do you see a folder called; '''Old Firefox?'''
'''https://support.mozilla.org/en-US/kb/recovering-important-data-from-an-old-profile'''
'''https://support.mozilla.org/en-US/kb/back-and-restore-information-firefox-profiles'''

Re: Data Extraction from Multik R/3 systems into one Infosouce

Hi Experts,
In my current project there is a requirement to bring data from two different R/3 clients(systems) into one BW sytem.
The inforsouce is the same. For example The FI GL data needs to upload into BW through the Infosource 0FI_GL_4 from two different R/3 clients ; 100 and 150. Is it possible?
Curreny set up is to bring data only from R/3 system 100. Now the requirement change and have to bring data from R/3 system 150. This is the situation in production client.
Please advise and share your view.
Thanks in advance

Luis:
Thanks for the response.
In both R/3 clients Data Source is 0FI_GL_4. The infosource is 0FI_GL_4. I am loading data into FIGL ODS. Are 0GN_R3_SSY and 0LOG_SYS_BE two infoobjects to be included into the FIGL ODS?
Another question - The data source for one client is in the revised mode in BW production client. Can I install the data source in the BW production client by generating transfer rule/transfer structure? Or do I need to transport it from the R/3 client and replicate it in BW?
Please respond.
Thanks

HT1296 Apple does not sync my Outlook Saturday appointments, yes it leaves out only the Saturday appointments from Outlook. What to do about this?

When I sync Outlook to my iPhone, my Saturday appointments from Outlook don't appear on my iPhone calender. All other appointments are correct except there are no Saturday appoinments...weird...What to do about this?

Scanpst.exe is a repair program for the Outlook data files. You should be able to find the program in the Microsoft Office folder on the computer. You might have to search for it. After you open that, you navigate to your Outlook data file. That is generally in your Documents folder. After running it, it should tell you if it repaired anything.
Also, in iTunes, you might want to reset the sync history. That is done by opening iTunes, going to Edit, Preferences, Devices, and click on the button.
Since you are not getting sync from phone to Outlook, you may need to create a new calendar in Outlook. If you know how to create a new blank calendar, do that and add a couple of new appointments. Try weekday and weekend. After connecting the phone to the computer, make sure you have it set to sync in iTunes and try a sync. See if it works. If it does, you may need to export your other calendars to a file and then import them back to the new calendar.
You can also try creating a new calendar on the phone and syncing that to see if it shows in Outlook.

HT4623 How do I get back to Setup Assistant after the settings have been entered? I need to get back to Setup Assistant to back up the data that was on my iphone 4S to my new 5S

I purchased a new iphone 5s yesterday from Verizon. They had a problem setting it up. They went through Setup Assistant setting up the phone. They could not get my back up I had on iCloud, so they just skipped it. Now I do now have all my apps or other data.
I have been doing some reading and it said to go back to Setup Assistant. I can't firgure out how to do that.
Can anyone help me?

Are you wanting to restore from your backup? IF so, go to settings - general - reset - erase all contents or settings this will wipe yoru phone clean, then you'll get the option to restore from backup.

Yes!!! I popped out my unlimited data sim from my verizon iPhone 5 into my new mini T Mobile and it worked like a charm

Similar Messages

Maybe you are looking for