Yesterday, I have installed the new update of Photoshop CC (2014) and now, Photoshop freezes. What 's the problem? My configuration: i7, ram 24 g, graphic card 3g

What's the problem?
There is a problem with the update.
I have uninstalled Photoshop CC (2014) and have reinstalled. Nothing.
Always the same problem!!!

Uninstall, use the cleaner tool, then try re-installing.
Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6

Similar Messages

  • I installed a new SSD drive in my computer and now Adobe Creative Suite Web Premium says I don't have a license. I have license. It was very expensive. I am disabled now, and I need this software working.

    I installed a new SSD drive in my computer and now Adobe Creative Suite Web Premium says I don't have a license. I have license. It was very expensive. I am disabled now, and I need this software working. Adobe Acrobat has been a primary tool for accommodating memory problems after a brain injury. (A car ran me down while I was out getting exercise.) I installed the SSD because I needed my management of PDF files to run faster. I called tech support for help when the software first stopped working, but they needed me to give them a number from my original disks. Because of my disability, I've been having someone come in to clean, and the shelves where I kept my software packages were cleared. I've been hunting for them ever since, but I can't look for them myself for very long at a time. Today I finally found them, but now I can't seem to contact tech support. What happened? I don't want to delete my old files because I need the setup to remain unchanged, because I don't do well with changes. I think all I should need is to have someone located the license file on drive E: and move it to wherever it is needed on the SSD drive, but I don't know what to look for.

    Tech support is not normally available on weekends.  You should contact them as soon as the weekend passes and pick up where you left off with them.

  • Hi there, i installed a system update earlier on my MacBookPro and now it wont connect to wi-fi, working through Network Diagnostics hasn't solved the issue.  all other devices here are connecting normally.  any ideas?

    hi there, i installed a system update earlier on my MacBookPro and now it wont connect to wi-fi, working through Network Diagnostics hasn't solved the issue.  all other devices here are connecting normally.  any ideas?

    Hi, this has worked for a few...
    Make a New Location, Using network locations in Mac OS X ...
    http://support.apple.com/kb/HT2712
    10.7 & 10.8…
    System Preferences>Network, top of window>Locations>Edit Locations, little plus icon, give it a name.
    10.5.x/10.6.x/10.7.x instructions...
    System Preferences>Network, click on the little gear at the bottom next to the + & - icons, (unlock lock first if locked), choose Set Service Order.
    The interface that connects to the Internet should be dragged to the top of the list.
    10.4 instructions...
    Is that Interface dragged to the top of Network>Show:>Network Port Configurations.
    If using Wifi/Airport...
    Instead of joining your Network from the list, click the WiFi icon at the top, and click join other network. Fill in everything as needed.
    For 10.5/10.6/10.7/10.8, System Preferences>Network, unlock the lock if need be, highlight the Interface you use to connect to Internet, click on the advanced button, click on the DNS tab, click on the little plus icon, then add these numbers...
    208.67.222.222
    208.67.220.220
    Click OK.

  • I updated itunes Jan 23, 2014 and now it will not open

    I updated itunes Jan 23, 2014 and now it will not open

    I think when uninstalling you may also have to choose (tick) to delete the preferences and other personal data like the bookmarks, stored passwords etc. to erase completely. If you are installing afresh, please try right-clicking on the file and '''Run as administrator''' to install. And when uninstalling, please also make sure choose to delete all data and also manually delete any '''Mozilla''', '''Mozilla Firefox''' or '''Firefox''' from %appdata%, %localappdata% and %programfiles%. You can open a location by typing for eg. %appdata% in the '''Run''' box (Windows key + R). You may also have to check the '''VirtualStore''' folder in %localappdata%. Files in the VirtualStore can be problematic. I think a clean installation may help.
    [https://www.mozilla.org/en-US/firefox/new/ Firefox]
    [http://kb.mozillazine.org/Installation_directory Installation Folder]
    [http://kb.mozillazine.org/Profile_folder Profile Folder]
    Please note that using system restore would usually damage the Firefox installation.

  • I updated to Safari 6.1 and now it freezes when opened

    Yesterday I updated to Safari 6.1 and now it freezes when opened, although the overall system stays up.  I updated to the latest Java and iTunes 11.1.2 at the same time. When I open Safari now, it pauses for a few seconds without going to the home page and then I get the spinning beach ball.  I get two messages:  One says that the plug-in for SplashID Safe has not been tested with this version of Safari (a message that I had been getting before the update and never caused a problem).  The other message says, "Crash Protection  It appears that Safari didn't quit properly.  Do you want Glims to re-open your tabs anyway?"  It gives me a choice to click "Cancel" or "OK".   I have tried clicking them (before the beach ball appears) and it makes no difference.  The version of Glims I am running is out-of-date. 
    The only available crash report is almost a month old and therefore is of no help. 
    I made a back-up with SuperDuper just before updating and can reverse the update if I do it soon, but I would like to get this working. 
    I would appreciate any advice. 
    Bill

    >>The version of Glims I am running is out-of-date.
    How do I uninstall Glims?

  • I updated to Muse CC 2014 and now it thinks that I'm a trial user. Why?

    I updated to Muse CC 2014 and now it thinks that I'm a trial user. I have a single app creative cloud subscription for Adobe Muse CC. Why does Muse CC 2014 think I am only a trial user?

    Please check Colby's response :
    https://forums.adobe.com/thread/1500867
    Thanks,
    Sanjit

  • I updated to PS CC 2014 and now my plug-ins are no longer available to use. how do I get them back?

    i updated from PS CC to PS CC 2014 and now my plug-ins are no longer available to use. how do I get them back?  I can no longer navigate to the NIK collection, my Topaz plug-ins, etc.  They still are accessible on LR, but they don't seem to now be accessible on PS CC 2014

    For Topaz, cop the shortcuts from Program Files\Adobe\Adobe Photshop CC\plug-ins  to the same folder in Photoshop CC 2014
    I don't know about Nik
    BTW  What sort of pictures does a 'Photographic Psycho' take? 

  • I have downloaded the new update for Firefox 3.6 and now cannot connect to the internet. I've checked my firewall and have uninstalled and reinstalled firefox, but nothing works.

    After installing the new update for Firefox 3.6, no matter what I do, I cannot connect to the internet using Firefox. I can get on the internet using my other browsers (Google Chrome and Internet Explorer), so Firefox is the only one that doesn't work. I have already checked my firewall and have added and removed Firefox from my firewall to no avail. I've also already uninstalled and reinstalled Firefox, but so far it hasn't helped.

    I have already tried removing firefox from my firewall. Even when I do that, my firewall doesn't detect firefox and prompt me to add it. And when I manually add it, it still doesn't work anyways. I've already tried the link as well, but it has been unhelpful. :/
    I'm not sure if it matters, but a few weeks before this, I did download Microsoft Security Essentials.

  • My Macbook Pro I guess downloaded the new update while I was asleep and now this black screen that is speaking won't go away.

    While I was asleep I believe my Macbook Pro downloaded some new software, I turned it on this morning and now I have this black screen with letter inside of it that says whatever is inside of it to me. It is very annoying as if I am online it will describe everything to me and move my screen. I am a student and cannot work or research when my computer does this. Can someone please help me figure out how to get rid of this?

    to disable VoiceOver, press "command+F5".

  • I installed a new hard drive into my MacBook and now it grey screens, any ideas to fix it?

    Hi Mac Community,
    I have a late 2009 aluminum MacBook that was having some troubles recently with the hard drive where it would start to spin up and then click back.  My computer slowed WAY down, and I was having boot problems, after doing some reading online I figured it was about to go. So I backed up everything and shortly thereafter the drive went and I couldn't boot in any mode and all the drivechecks using diskwarrior came back as corrupted: unrepairable.
    So, no biggie.  I upgraded the drive to a Seagate 750GB Momentus XT Hybrid Hard Drive.  The install of that went fine and I installed OSX, reloaded everything from time machine, and had my computer back.  Until, I performed an OSX software update.
    Upon restart, nothing happened.  And I mean nothing.  With the old harddrive I'd get the apple and it would try and boot in recovery mode.  With the new harddrive, I get the boot noise and then a grey screen, I am not able to boot into any mode, or do anything at all.  Just a grey screen.  So, my question for the apple community, would be, where should I go from here?  I am pretty sure that the harddrive was compatible with my machine as I had seen it recommended on these forums. My only thought is to buy a usb to sata cable and remove the new drive and test in using another computer, just to see if the drive is functioning.
    Any help would be appreciated!  Thanks in Advance.  Oh, and in case your wondering why I just dont take in into a Mac store for a fix, I live in a small alaskan town and there is nothing like that around, so, I am the only repair man in town.

    jrmetzger,
    iOS runs on iPads and iPhones; OS X runs on Macs.
    Given your situation, I’d highly recommended that you purchase a SATA-to-USB adapter, so that you can test both your old disk and your new disk externally, since it might be that the problem is due to a faulty internal SATA cable rather than due to faulty disks.

  • I installed a new router from my ISP provider and now I can't find my Time Capsule or "Guest" network.  What do I need to do to correct this problem?

    I installed a new (and supposedly better & stronger) router from my ISP provider (Verizon) and now I can't find my Time Capsule or "Guest" network. 
    My Mac is not backing up because it can't find my Time Capsule network & my "Guest" network has also disappeared. 
    What do I need to do to correct this problem?

    You must reset the TC to factory and start over. The TC simply remembers too much from the previous setup to work in the new one.
    If your new router is going to take the router role, then the TC will have to be bridged and you will lose your Guest wireless.. the way around this is to use the Verizon router as your guest wireless and the TC as your main wireless.
    The Factory Reset Gen1-4.
    Unplug your TC. Hold in reset. and power the TC back on.. without releasing reset for about 10sec. When the status light flashes rapidly; release it.
    Be Gentle! Feel the switch click on. It has a positive feel..  add no more pressure after that.
    TC will reboot after a couple of minutes with default factory settings and will wipe out previous configurations.
    No files are deleted on the hard disk.. No reset of the TC deletes files.. to do that you use erase from the airport utility.
    Factory reset Gen 5
    Hold in reset for about 5sec until the status light flashes quickly.
    If your AirPort Time Capsule still doesn’t respond, do a similar reset to the Gen1-4.
    Unplug your AirPort Time Capsule .. hold in reset and power the TC back on.. without releasing the reset.. wait until status led flashes rapidly.

  • Installed latest Acrobat Update to 8.2.1 and now I can't print PDFs

    I recently installed the latest Acrobat update to go to Acrobat 8 Professional 8.2.1.  Now I can no longer print PDFs.  Also when I look at the list of printers it shows "AdobePDF (Copy1)" plus many more copies (see picture below).  I'm running Windows 7 64-bit.  How do I resolve this problem?

    I was having the same issue. Supposedly, Acrobat 8 and Win 7 aren't compatible. I then tried the following steps and it seems to work.
    1. Right click on the Acrobat 8 icon and scroll down and select properties.
    2. A pop up box will appear. click on the compatibility tab.
    3. Check the box in compatibility mode and select windows XP (Service Pack 3), then at the bottom of the box, click on the box next to Run this program as administrator.
    4. Click apply then ok.
    Let me know if this works for you. Good Luck!

  • HT1461 help!  i have installed windows 7 on my mac book pro and now it will only open in windows.

    How do I get back to osx operating system?  The instructions I found said I should go to my windows system tray and select boot camp control panel but it is not there.

    You have not installed the Windows drivers required for your computer. You must install them before the control panel is available.
    For now you can return to OS X as follows:
    Boot Using OPTION key:
      1. Restart the computer.
      2. Immediately after the chime press and hold down the
          "OPTION" key.
      3. Release the key when the boot manager appears.
      4. Select the OS X disc.
      5. Click on the arrow button below the icon.

  • I have installed Windows 7 on to my Pavillion 9092ea and now my Medina Centre wont work

    Every time I try to open Media Centre I get a message telling me that it has stopped working and ischecking the problem.

    Start again this time read and follow the Bootcamp help and installation manuals, http://www.apple.com/support/bootcamp/. Use Bootcamp Assistant to create a Bootcamp partition and download the Windows support software.

  • HT6154 Just tried to install the new update to my iPhone 5S and now it is stuck trying to communicate with iTunes and will not be recognized ny the laptop. iPhone screen shows a cable and the iTunes logo. Using Windows 7 Ultimate. How do I reset this to f

    Help!!!
    I now have a brick for a phone. Just tried to update to 7.1.1 using iTunes and it wipred out the operating system OK but now will not communicate with iTunes or the laptop. I reloaded iTunes and still no luck. If I press and hold the power and home buttons it inly comes up to the same screen showing the lightning cable pointing to iTunes logo. How can I get this running again? Even a factory reset to start would help if possible then I can do a restore. Right now it is worthless.

    Hello HarbourStables,
    Thank you for the details of the issue you are experiencing with your iPhone 5s.  I would be concerned too if my iPhone was stuck in recovery mode and not recognized in iTunes so that you can restore it.
    I recommend the following article for the issue you described and specifically this step:
    5. Use iTunes to restore your device.
    If you don't see your device in iTunes, follow these steps for Mac or these for Windows.
    Find the full article here:
    If you can't update or restore your iOS device
    http://support.apple.com/kb/ht1808
    Thank you for using Apple Support Communities.
    Best,
    Sheila M.

Maybe you are looking for