Yesterday my C4680 worked fine. Today it won't print. In your opinion what has changed and what do I
HP Photoprint C4680
Windows 7 32 bit
Fatal error
No changes except Logitech mouse M 505 failed-new mouse is being mailed from Logitech
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar
Similar Messages
-
Why won't my iMovie record my voice over? I have a previous voice track that I recorded yesterday that worked, but today it won't. I tap the necessary place each time, and tap it again to stop recording...has anyone ever had that problem before?
Hi
Will You try
A. Do this Voice over in a brand new Project
and if this doesn't work
B. trash iMovie pref and try again
I have a very faint memory of problem when adding two or more voice over to one project - but it can all be just a bad dream. (It's a function I never use - I use a miniDV Camera or other recorder to do my narrative - then import this as .aiff audio and use this in my movies as any other audio without any problems - so it's a totally different way to handle audio in all)
Yours Bengt W -
ITunes working fine but it won't detect my ipod or upgrade firmware
I have a PowerBook G4, running the latest version of osx 10.4 and a 60 gig, 5G ipod. I was prompted over the weekend to install the new quicktime and the new itunes which I did. Both are working fine. I have no problem listening to music or viewing movies or whatever.
Except, the ipod is not being detected by itunes 7.0. I checked the ipod itself and it has the 1.1.2 version of the ipod firmware. I have done everything I can think to do including the first 4 Rs (Reset your iPod, Retry with a different USB port, Restart your computer, Reinstall iPod and iTunes software). I am not willing to try "Restore your iPod" because if that does not work I will have a blank iPod and I am about to travel for a few days and I want to have music on it when I leave.
I suppose the problem might be something about getting my ipod's firmware updated to 1.2 so that it can then be detected but the 1.2 update can only be done through iTunes 7.0. Worse, there does not seem to be any button I can push to FORCE iTunes to update the ipod firmware. This seems very chicken-eggish.
I don't actually see many folks have THIS problem. The closest is people who can't do much with the iPod but can at least see it in "source" within iTunes. I don't even see a "source" list along the left-hand side of iTunes 7.0 (I just see LIBRARY, STORE and PLAYLISTS).
Any thoughts on how I might resolve this?
PS, I have two ipod cables and tried both and tried them on each of the two USB ports on my powerbook. That plus the fact that I have never had a problem with either the ports or the cables before leads me to believe this is not the problem.After several weeks of not finding answers here or elsewhere on the web - and after waiting for an iTunes 7.0.1 and getting it - I "gave up" and went to the Apple Store last night.
The Genius bar took my ipod, plugged it in to a mac, reached under the counter and handed me what they said was a NEW ipod (it was in a generic brown box with no accessories, cables, etc). I did not like that solution for two reasons. First, all of my family photos and videos were on my iPod and I did not like the idea that maybe those photos would turn up on the web someday. Second, it was a gift and had a personalized engraving on the back. When I pressed them on what they thought was wrong with my iPod they said it was not worth the time to figure out and they would just give me another one. Or I could ship in to Apple Support and they would send me a new one WITH the same engraving in a couple of weeks. I took the "new" iPod.
And, sure enough, when I connected it to my powerbook it was detected, the firmware was updated and iTunes synced all my music, photos and videos (and games).
The Genius bar people seems pretty sure that the problem was hardware (the port where you connected the USB cable at the bottom of the device). When I pointed out that it had been working fine right up until the day I upgraded to iTunes 7.0 and that it had not worked since they did not seem terribly interested.
So, my problem is "solved" in that I have a working iPod sans engraving. -
I am trying to look at my I cloud account on a pc in the library it normally works fine but now says problem connecting with the server. what can i do or is there an issue today
Hi...
Try restarting the AMDS > How to restart the Apple Mobile Device Service (AMDS) on Windows
iCloud system status reports everything green > Apple - System Status -
I have an iPhone, Ipad and a Laptop. They all are configured to company's exch.I am not able to sync calendar events on iPad made from my computer or iPhone. It works fine when I make an event from iPad, it shows on computer and iPhone but not vice-versa.
-Me again - it also won't upload the few new pictures I have on the computer onto the iPad without deleting all the photos that are already there....
-
I am using a mini display to hdmi with my macbook and the display works fine. However, the sound will only play iTunes such as music and movies but when i go online to watch movies on youtube it will not play any sound. Please help
HDCP maybe? Read this http://www.macnn.com/articles/08/11/26/displayport.drm.conflict/
-
If I hover over it, I can see a small view of the last screen I was working on. It won't open up full screen, what should I do. I've closed it and restarted my computer numerous times with no luck.
Check System Preferences > Energy Saver
Select: Put hard disks to sleep when possible
Then click: Restore Defaults -
drag and drop to photo shop no longer works after installing Apple "Photos"; It was working fine before the latest Apple update (10.10.3) . what can be done?
Nothing. It's nothing to do with PSE; this is a limitation of Photos, as is the loss of being able to use an external editor without exporting copies of your images.
-
I just put Facetime on my MacBook and Ipad. I can connect and recieve video but no sound. The other person can hear me. If I use Skype everything works fine. I can't find any where in Facetime to change settings for the audio. Any suggestions
Options for when an iOS device gets locked because of forgotten passcode:
Restore (and reset passcode) on your device by connecting it to the last computer to which it was connected:
iTunes: Backing up, updating, and restoring iOS software - http://support.apple.com/kb/HT1414
If you cannot connect it to the computer to which the device was last connected (or the device was never connected to a computer) you will have to use recovery mode to completely reset the device, losing all data:
iOS: Unable to update or restore - http://support.apple.com/kb/HT1808 - recovery mode (e.g., cannot connect to computer last used to sync device, iTunes still asks for a password)
If recovery does not work there's:
DFU mode: http://osxdaily.com/2010/12/04/ipad-dfu-mode/
How to put iPod touch / iPhone into DFU mode - http://geekindisguise.wordpress.com/2009/07/16/how-to-put-ipod-touch-iphone-into -dfu-mode/ -
My cellular network is not working on my iphone 5 after updating to ios 8.1.2 !!
It was working fine on ios 8.1.1 i need help, what can I do?I have this problem too - and it is on a BRAND new iPhone 6 - I have definitively tracked the issue to the moment I upgraded to iOS 8.1.2 - and am beyond frustrated. No fix to tell you about, sorry…but you can read my post here if you are into the whole "misery loves company" thing: iOS 8.1.2 Cellular data problem (Definitive - maybe)
-
Mail will not display images with .jpeg extension. .jpg works fine. (displays in place when opening the email. What plug-in would correct this?
If you think you're insane now, try maintaining those pop up menus.
As far as I know, these menus have not been updated since FW 8, so
they are at least two versions old.
Save yourself a lot of grief by avoiding those menus. There are many
other products on the market which do a much better job of creating
and maintaining this type of navigation structure.
Read this link before you climb any higher on this slippery slope:
http://apptools.com/rants/jsmenu.php
There was another blog post by the fellow who originally wrote the pop
up menu feature, but I can't seem to locate it. Even he says stay away
from them.
Not the answer you probably want, but I hope it helps, nonetheless.
Jim Babbage -
AirDrop works fine, but the name that comes up on both my mini ipad and iPhone 5 is Selena Gomez. Why? Idk... I checked my phone name in settings and it comes up as MY name. What's going on?
Well, then the only answer is that you are Selena Gomez
-
I watched a video on my iphone, and it worked fine.
I wanted to watch it on our MacBook for sound and clarity, and every time I accessed it, it locked up. To the point that the only solution was holding down the power button.
Everything else worked, and I could freely enter information and open other Facebook entries, but when hitting the "play" button or clicking on the video it immediately bought up the spinning beach ball, and would never clear. Any solutions?Did you try viewing the video in a different browser? Firefox or Chrome maybe?
-
I started getting messages 3 days ago that my Safari cannot establish a secure connection to Facebook, and it will not open that website. It worked fine for years before this occurred 3 days ago, what can I do to fix it? OS 10.8.3, Safari 6.0.4
From your Safari menu bar click Safari > Preferences then select the Privacy tab.
Click: Remove All Website Data
Then delete the cache.
Open a Finder window. From the Finder menu bar click Go > Go to Folder
Type or copy paste the following
~/Library/Caches/com.apple.Safari/Cache.db
Click Go then move the Cache.db file to the Trash.
Quit and relaunch Safari to test.
If nothing above helped, troubleshoot Safari extensions.
From the Safari menu bar click Safari > Preferences then select the Extensions tab. Turn that OFF, quit and relaunch Safari to test.
If that helped, turn one extension on then quit and relaunch Safari to test until you find the incompatible extension then click uninstall. -
my apple tv was working fine untill the AirPlay option disappeared. I haven alterd the settings and have tryed rebooting both iPhone and ipad. I even rebooted the ATV and that disn't work. i am connected to the same network on both devices to. My iPad is up to date but my phone isn't but as I said mirroring and AirPlay worked fine on both devices befor...
Hi F1N5G10,
Thanks for contributing to the Apple Support Communities.
It sounds like you don't have the AirPlay option on your iOS devices. Restarting your Apple TV and iOS devices was a good first step, and you can find some additional tips to guide your troubleshooting at this link:
Resolve issues with AirPlay and AirPlay Mirroring from iPhone, iPad, and iPod touch - Apple Support
Sincerely,
Jeremy
Maybe you are looking for
-
Hi, I got the problem with Firefox 27.0.1. I can not run Selenium on Firefox after login a website for automation testing. The browser is not responding. However when I close Nunit, the page is back to be normal. The title is returned to the name of
-
Question about implementation of a webservice
Hi I have successful implemented a webservice call in my webdnypro application. But I am not sure if I have done this the right way Scenario: I have a view which displays data from a business partner. These data can be accessed over a webservice. The
-
How to increase java_pool_size and shared_pool_size in oracle 9i?
Friends, OS: RHEL AS 3 db: 9iR2( 9.2.0.8) when i run the patch catpatch.sql....at the middle of the process.....there was a message says to check the size of the java_pool_size and shared_pool_size then it stops. now can i increase java_pool_size and
-
Hello, I may be a total nub for asking this, but is there a way to run an oracle report as a batch job such that a .pdf file or .html file is deposited in a directory? I'm running 9ias, any help would be greatly appreciated. -Scott
-
Hi folks, I have a requirement where I have to add freight costs to a delivery. I am using the following code. DECLARE action_code VARCHAR2(15); pub_freight_costs wsh_freight_costs_pub.pubfreightcostrectype; freight_cost_id NUMBER