Yesterday my macbook worked fine...

now it will only boot up in "safe mode" Is this a hard drive problem?
Easrlier this year I went in for a liquid damage issue but everything looked fine at the time. I am worried that this is the culmination of that past damage. :/

Is it typing in all caps? Perhaps the liquid damage affected the shift key.

Similar Messages

"I have a 5th generation time capsule. All of my wifi devices (iPhone, iPad, macbook) worked fine until the other day when everything but my laptop stopped receiving a wifi signal.

"I have a 5th generation airpot extreme. All of my wifi devices (iPhone, iPad, macbook) worked fine until the other day when everything but my laptop stopped receiving a wifi signal. I shut down my Mac, unplugged the modem, router, let sit for 10 seconds, started it up and 'presto' everything worked. Then yesterday all but the macbook stopped receiving wifi again. I tried the same scenario as the other day but nothing. I reset the airport extreme to factory settings and still nothing. Is the airport extreme not working?

If it was not working the Mac would not get a signal. Restart the IOS devices and reconnect to the network

My MacBook works fine wifi everywhere except for home. The home wifi is fine with the iPad and iPhone. How can I fix my MacBook?

My MacBook works fine wifi everywhere except for home. The home wifi is fine with the iPad and iPhone, so I assume the issue is with my computer. My computer works fine on wifi networks elsewhere. The only problem is at home.
The computer "connects to the wifi," but browsers and other internet-dependent software do not work. Curiously, if I connect the ethernet cord that doesn't work either. Usually if I reset the modem to factory settings twice (for some reason, once doesn't do the trick), my computer will fully connect to the wifi. However, in a few days, it goes back to not working.
Today, resetting the modem didn't work. I could only get wifi connection while in safe mode, but not in normal mode. So, the issue seems to be software not hardware. I have tried starting new accounts in normal mode, but those also don't connect properly to internet.
Not sure if this is relevant, but this problem started when my building switched internet providers from ComHem to Telia (I live in Sweden).
What do you recommend I do?
Thanks!
PS I use Snow Leopard: OS 10.6.8

Not unless the modem is causing a problem.
What you want to do is get it to work reliably over Ethernet first, then tackle wifi. Power off the modem. On your macbook, delete the Ethernet configuration and the Wifi configuration. Power up the modem, then connect the mac via Ethernet. Create the new Ethernet configuration and see if you can connect.

I am renewed my cc subscription yesterday, and it works fine on my main computer, But my Second computer is telling me I need to renew my subscription, But when I go to the Adobe applications manager, my subscription isn't showing. Any idea how I can acti

I renewed my cc subscription yesterday, and it works fine on my main computer, But my Second computer is telling me I need to renew my subscription, But when I go to the Adobe applications manager, my subscription isn't showing. Any idea how I can activate my subscription on a second computer?

Does your Cloud subscription properly show on your account page?
If you have more than one email, are you sure you are using the correct Adobe ID?
https://www.adobe.com/account.html for subscriptions on your Adobe page
If yes
Some general information for a Cloud subscription
Cloud programs do not use serial numbers... you log in to your paid Cloud account to download & install & activate... you MAY need to log out of the Cloud and restart your computer and log back in to the Cloud for things to work
Log out of your Cloud account... Restart your computer... Log in to your paid Cloud account
-Sign in help http://helpx.adobe.com/x-productkb/policy-pricing/account-password-sign-faq.html
-http://helpx.adobe.com/creative-cloud/kb/sign-in-out-creative-cloud-desktop-app.html
-http://helpx.adobe.com/x-productkb/policy-pricing/activation-network-issues.html
-http://helpx.adobe.com/creative-suite/kb/trial--1-launch.html
-ID help https://helpx.adobe.com/contact.html?step=ZNA_id-signing_stillNeedHelp
-http://helpx.adobe.com/creative-cloud/kb/license-this-software.html
If no
This is an open forum, not Adobe support... you need Adobe staff to help
Adobe contact information - http://helpx.adobe.com/contact.html
-Select your product and what you need help with
-Click on the blue box "Still need help? Contact us"

Macbook works fine when plugged in, turns off when unplugged.

Hello all,
As stated my 2008 Unibody 13 inch, serial number W8******1AX turns on and works fine when it is connected to power.
When it is unplugged it instantly turns off and turns its fans on full until it depletes the battery (so it is obviously getting power.. just not where I want it)
Since the problem began I have tried two new batteries, neither of which had any different symptoms.
Before this, the computer had an intermittent life, it would turn off when it saw fit, which got progressively worse.
I have followed the guides to resetting the SMC but have had no luck
I have been running it without the battery (to save it charging and discharging for no reason) and sometimes when plugged in without a battery
the magsafe green indicator light goes from dim to bright.
With the battery installed it stays bright orange until it is charged and then switches to bright green.
(I have tried it with another charger, same symptoms)
Here is the Battery Read out;
Battery Information:
Model Information:
Serial Number:          ?00€›Æ⁄¬+9tt
Manufacturer:          GSA-1280
Device Name:          ASMB016
Pack Lot Code:          3230
PCB Lot Code:          30db
Firmware Version:          ddae
Hardware Revision:          dac2
Cell Revision:          2b39
Charge Information:
Charge Remaining (mAh):          4113
Fully Charged:          No
Charging:          Yes
Full Charge Capacity (mAh):          4200
Health Information:
Cycle Count:          1
Condition:          Normal
Battery Installed:          Yes
Amperage (mA):          379
Voltage (mV):          12275
System Power Settings:
AC Power:
System Sleep Timer (Minutes):          15
Disk Sleep Timer (Minutes):          10
Display Sleep Timer (Minutes):          5
Automatic Restart on Power Loss:          No
Wake on AC Change:          No
Wake on Clamshell Open:          Yes
Wake on LAN:          Yes
Current Power Source:          Yes
Display Sleep Uses Dim:          Yes
PrioritizeNetworkReachabilityOverSleep:          0
Battery Power:
System Sleep Timer (Minutes):          2
Disk Sleep Timer (Minutes):          10
Display Sleep Timer (Minutes):          1
Wake on AC Change:          No
Wake on Clamshell Open:          Yes
Display Sleep Uses Dim:          Yes
Reduce Brightness:          Yes
Hardware Configuration:
UPS Installed:          No
AC Charger Information:
Connected:          Yes
ID:          0x0100
Wattage (W):          60
Revision:          0x0000
Family:          0x00ba
Serial Number:          0x00ebc719
Charging:          Yes
Power Events:
Repeating Events:
Type:          Wake or Power On
If this at all helps.
I'm at my wits end with this thing, I know it is getting on in age, but other then this, it has been flawless in its operation.
If anyone has any suggestions I would be happy to hear them.
Many thanks!!
<Edited By Host>

There may be a hardware cause behind the symptoms you cite, so a diagnostic
is recommended to see which parts are weak or failed in the computer. A visit to
an Apple Store with Genius bar may be helpful, as they can perform testing there.
A call ahead or use their web page, to schedule an appointment, is advised.
In the US and Canada, the Genius bar at a retail Apple Store can perform
a diagnostic service, for no fee, even on Apple products without AppleCare.
See links:
Apple - Concierge
Genius Bar - Apple Retail Store:
http://www.apple.com/retail/geniusbar/
List of Apple Stores, cities, countries:
http://www.apple.com/retail/storelist/
Also authorized Apple service providers who can test, repair and guarantee their
work should be able to handle an out-of-warranty older Mac, within age limits...
Ones too old for the Apple Store could be serviced at a Specialist, instead.
•Find Locations - Sales, Service, Training, Consulting:
https://locate.apple.com/
•Did you try resetting the System Management Controller?
Intel-based Macs: Resetting the System Management Controller (SMC)
•A reset of NVRAM may help with some issues:
About NVRAM and PRAM
•Calibrating is part of maintenance, esp with older portables:
Apple Portables: Calibrating your computer's battery for best performance
•The power adapter can be problematic and cause issues, so there's this:
Apple Portables: Troubleshooting MagSafe adapters
Also another item, other than keeping the magnetic connections clean of
debris, grime, and corrosion, is to check the MagSafe Board or have it
checked as part of a greater diagnostic. This board is behind the port
that supplies the computer and the battery with power from the adapter.
When it partially fails or if/when one of the connecting wires or plug fails
you can find odd issues or partial use. The battery may charge but it
may not be able to power the computer, and other odd effects.
https://www.ifixit.com/Device/MacBook
In older portable Macs, this was generally called a 'DC-in board' and as
such, you could read about it in an iFixit repair guide for the MacBook
model you have. These vary so the matching article is recommended to
see if that is something you may want to try. But I would have diagnostic
testing done and avoid additional damages from attempted DIY efforts.
There have been a few reports of other failure on the logic board that
contributes to a partial failure of the charging system, so about all this
may do is troubleshoot around the failure without finding an exact cause.
However it goes...
Good luck & happy computing!

I have a new Apple TV, I plugged it in yesterday and it worked fine. I then did the update and went to bed. Today I can't get the Apple TV to turn on again! HELP

I have a new Apple TV, I plugged it in last night and it worked fine, I then, I was mirroring with my iPad and everything. It then prompted me to to the update so I hit update and went to bed. Today I can't turn the Apple TV on!
It just says no signal on my tv.
I've tried pressing menu and down arrow for 6 seconds, an apple appears on my tv screen but then it goes back to saying no signal!
Is it broken?

Check these troubleshooting steps:
http://support.apple.com/kb/HT1551?viewlocale=en_US&locale=en_US
Specifically I wonder if the AppleTV may be trying to connect with an unsupported resolution giving a black screen. Try cycling display resolutions using these remote commands in step 6:
If your TV screen appears fuzzy or black (you see no video)
Make sure the television you are using supports the Apple TV resolution requirements. Please see the Apple TV technical specifications.
When you connect power, check to make sure the LED turns on. If the LED is not on, then verify with a known good power outlet or connect something else to the outlet you're using for Apple TV and make sure it works (such as a lamp or clock).
Make sure you're using the correct video cables and that they are connected firmly to Apple TV and to your TV.
Connect the HDMI cable directly into the Apple TV and your television, remove any third party devices or adapters.
Make sure the input setting you've selected on your TV matches the input you have your video cables connected to. See the documentation that came with your TV for more information.
Change the Apple TV resolution by pressing and holding the Menu and Up button for six seconds. The Apple TV will automatically cycle to the next resolution at approximately 20 second intervals. Pressing the Select button will immediately cycle to the next resolution.
If you are connected via HDMI, try unplugging and replugging your HDMI cable.
If HDMI isn't working on an Apple TV (1st generation), try component cables instead (and disconnect the HDMI cable temporarily). Read more about HDMI vs component video.
AC

I used my Photoshop Elements 11 program yesterday and it worked fine; today I tried to open it and got a C++ Runtime Error. I am not tech savvy so need a solution I can understand and implement...if I uninstall and reinstall the program will it resolve?

A little more info -- the program is running on Windows 8.1, 64 bit OS.
I originally purchased the program from Amazon -- could I uninstall and then re-download from there to resolve this?
Thanks!

Thank you so much. The error provided no clues as to which MSVC runtime should be reinstalled so I removed the program from my computer and reinstalled it. It is working fine now. Really appreciate your help and quick response!

I downloaded Firefox 4 yesterday, and everything worked fine. When I booted up my computer today, I have problems. Flickr is all deformatted, streaming audio and video won't work from a variety of sources. All these things worked fine yesterday.

Flickr is deformatted. This forum is deformatted. Can't see the streaming toolbars at my public radio station. Can't stream news shows that I suually watch.
It all works fine with IE. I had to switch to Explorer to access this forum!

I had this problem too after i upgdatd to OS X Mavericks... only the songs on my iphone 5s that i purchased from itunes would play.
i read something about it being a syncing issue. when you plug your phone into your computer with the usb cable, the person said to switch from automatic syncing of itunes to the "manual" option. mine was already set to manual so i wasn't sure anything would work. BUT, when i plugged my phone into my computer, it started to sync all of my music on my phone again (top of itunes bar where song playing/time is listed said "now syncing 123/534 songs to x's iphone"). once that was completed, i checked the music app on my iphone and everything was back to normal!
so, i would suggest setting your music syncing settings to manual if you haven't tried that yet!
hope this helps!

My printer (HP8500) is wi-fi connected to my imac and my macbook. works fine from macbook, but has stopped working on the imac--shows offline. How can I fix this? Thanks

I have an iMac and MacBook Pro, both running Snow Leopard at current maintenance levels. I have an HP8500 printer connected via wi-fi. All have been working well until just recently. Now, the iMac cannot communicate with the printer. The printer icon shows offline. The printer is still online to the MacBook. I suspect a related problem is that when I try to access files on the MacBook from the iMac, I get a message that they are unavailable, but re-clicking once or twice to re-try works and the files are accessible. The only problem is that I cannot modify them from the iMac, even though the sharing options are set for update capability.
Resetting the printer and re-booting the iMac don't help.

Yosemite is a big problem.
I recommend you factory reset the TC and start over.
Factory reset universal
Power off the TC.. ie pull the power cord or power off at the wall.. wait 10sec.. hold in the reset button.. be gentle.. power on again still holding in reset.. and keep holding it in for another 10sec. You may need some help as it is hard to both hold in reset and apply power. It will show success by rapidly blinking the front led. Release the reset.. and wait a couple of min for the TC to reset and come back with factory settings. If the front LED doesn’t blink rapidly you missed it and simply try again. The reset is fairly fragile in these.. press it so you feel it just click and no more.. I have seen people bend the lever or even break it. I use a toothpick as tool.
N.B. None of your files on the hard disk of the TC are deleted.. this simply clears out the router settings of the TC.
Redo the setup from Yosemite.. it needs to be directly involved in the setup to remember anything.
Please use short names.. no spaces and pure alphanumeric. eg TCgen5 base station name. TCwifi as wireless name.
Set password WPA2 Personal security which is pure alphanumeric mixed case and numbers.
Please empty out all the old wireless names from your devices.. reboot them and rediscover the network.
If it still fails tell us.

12/6/2011: I can get into my Yahoo Mail main page but am unable to see the full page, and, am not able to get to my mail at all. Yahoo works if I use MS IE. This just started yesterday; Firefox / Yahoo worked fine for at least 4 +/- years.

Firefox and Yahoo suddenly, for me, stopped working insofar as being able to open my mail.
I removed Firefox from my system and re-loaded it. Same problem.

Hmmmm, http://www.seattlepi.com/ loads fine hear in 10.4.11, FF 3.6.8, but I do see it uses some kind of Flash.
The last really supported Flash for PPC was 10.1.102.64, but if it's for like Facebook or such, people have been fooling FB to think they have a leter version installed.
Texas Mac Man's Flash hack/post...
https://discussions.apple.com/thread/3599648?tstart=0
Flash player 11.1 hack on PowerPC - https://discussions.apple.com/message/16990862
Might be later ones around also... saw 11.3 I think.
(If you are running a PPC Mac with Flash Player 10.1.102.64 and are having problems with watching videos on FaceBook or other sites, contributor Texas Mac Man suggests the following solution which fools the site into thinking that you are running the latest version:)
Download this http://www.steelbin.com/FPforFBPPC.zip to your desktop, unzip it, and replace the current Flash Player plug-in which is in your main/Library/Internet Plug-Ins folder, (not the user Library). Save the old one just in case this one doesn't work.
You should also consider the Shockwave Player, which displays Web content that has been created by Adobe Director, much used for multimedia: For PPC Macs: http://get.adobe.com/shockwave/
See in each Browser which version of Flash it thinks it has...
http://kb2.adobe.com/cps/155/tn_15507.html
Then Test Adobe Shockwave & Flash Players...
http://www.adobe.com/shockwave/welcome/

Black macbook working fine should I send it in?

Hey guys i bought the 1499 black mackbook about 4 weeks ago instore. The macbook is a week 33 model so I assume it has been sitting in the stockroom for a while. I have no problems at all. I was just wondering if I should send it in to have the internals upgraded before my warranty runs out to prevent the macbook from having the issue down the road?

"If it ain't broken, don't fix it." Star Trek's Scotty character played by James Doohan believes this, and so do I.
However, you can buy AppleCare anytime in the first year of ownership, should the issues emerge after the first year of ownership, or if you desire to have someone you can call 7 days a week to ask questions about Mac software at no extra charge other than the initial AppleCare price, and your coverage will extend to three years from the computer's date of purchase. After that year is up, you can't purchase that extension and will have to pay a per incident plus parts and labor for repairs. You decide which is more worth it to you.

I downloaded mountain lion yesterday and it works fine

i just want to say the new photos ROCK!!!
I'm sitting here watching for the next one to come up
an unexpected pleasure
thank you apple
Rina

Why do you think Mountain Lion is a disaster? Perhaps you could explain what problems you are having?
You cannot reinstall Snow Leopard unless you have the proper installer disc for your computer. You will need to wipe your drive in order to install Snow Leopard.
Boot from the Snow Leopard disc.
After you select your language select Disk Utility from the Utilities menu in the menubar at the top of the screen.
User Disk Utility to erase your hard drive.
Quit Disk Utility to return to the installer.
Install Snow Leopard.
Update Snow Leopard by downloading and installing the Mac OS X 10.6.8 Supplemental Update.
You cannot reinstall Lion at this point unless you have kept a copy of the Lion installer application or can re-download the installer from your previous purchases in the App Store.

Hello, i bought my iPad3 yesterday and it works fine, but today it request for a system update to the iOS 6, since that al the applications i've tried to download say that they are waiting, please help me, thanks

The applications say they are waiting, please i need help.

Thank you very much, i solved the problem rebooting the iPad. :D

Yesterday my C4680 worked fine. Today it won't print. In your opinion what has changed and what do I

HP Photoprint C4680
Windows 7 32 bit
Fatal error
No changes except Logitech mouse M 505 failed-new mouse is being mailed from Logitech

Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

My mail was working fine until yesterday. Now it says that mail connects to the internet - but something wrong with the ports. I have spoken with talktalk - they can't help, Ithe major problem being that I have forgotten my password!

Hi, I'm working on an Imac, yesterday email was working fine, now nothing is happening. It says that I need a password to check details - this I can't remember, it doesn't seem to be the same as the one I use to log on to mail through browser (talktalk) - message says can connect to internet but error with port settings etc which need verifying. Talktalk unable to help further - but as I can't get past password page I am very stuck. Any one help as to how to find out password.... have tried to make a new account but that doesn't seem to wrok either. Am wondering if fault is with computer. Thanks.
imac 10.10.1

TalkTalk E-mail Setup See post by Csound1

Yesterday my macbook worked fine...

Similar Messages

Maybe you are looking for