Yet another Applications/OS X quitting post

I have read every message on this forum dealing with this problem and tried every suggestion, but nothing yet has work. I've had my MacBook for a week now (And just switched over from a PC. Sucky to be having this trouble right away) and I have already had to get my hard drive reimaged, which was done yesterday. Before Saturday, when it kept crashing during start up, hence the reimaging, it worked perfectly. Since it was reimaged though, my programs and OS X keep shutting down on me. I haven't downloaded anything outside of MSN and Adium, which I got from the Apple website. I have tried resetting the NVRAM and everything else. This problem has been happening with all of my programs, not just what I've downloaded.
Since I get my laptop through my school, I don't have the Install disk, because they decided we don't need to have them or a paper manual. Is there anything else that can be done, short of going into Tech Services at 7.30am tomorrow, to fix the problem? This is extra frustrating for me since my roommate got her MacBook the same day and has had no problems. I think I've angered the PC gods from switching.

Yea, I was wondering if it could have just be the computer. It's been behaving itself since I made that post though (as is the case for most problems) and hopefully it'll continue to work. When it works properly I like it though, even though I still need to get used to the differences. (The Dock just isn't the same as Window's toolbar. I miss it.)
Thanks for the reply.

Similar Messages

Yet another cocoa without interface builder post

I am sure its been brought up before. I would like to know if its possible to write Cocoa apps without Xcode, Interface Builder, or NIB files in general; another words, write Cocoa programs programmatically using ONLY Objective C. Before you ask me why I would want to do such a thing and that I am crazy, please hear me out.
I come from a Win32 background, and my primary languages are C and C++. I am getting used to Objective C (though I wish I could use C++ to program in Cocoa). I picked up a copy of Cocoa(R) Programming for Mac(R) OS X (3rd Edition) by Aaron Hillegass, and have been trying to learn cocoa from it for the last few months. Basically, I am having big trouble wrapping my mind around cocoa via the very conceptual high level approach this book takes. I can not for the life of me begin to understand this whole making connections with interface builder.
I do NOT plan to write production applications in cocoa by hand, but if I could just write a few trivial applications in cocoa by hand without interface builder or nib files, perhaps when I do use interface builder, I won't have such a hard time understanding whats going on.
Thanks in advance for the help.

__mikem wrote:
I am sure its been brought up before.
I don't care. Your question isn't about learning how to program and learning via the iPhone SDK. I'll do anything I can for you
I would like to know if its possible to write Cocoa apps without Xcode, Interface Builder, or NIB files in general; another words, write Cocoa programs programmatically using ONLY Objective C.
Certainly. You can write command-line Cocoa apps. Xcode is just an IDE like Visual Studio.
Before you ask me why I would want to do such a thing and that I am crazy, please hear me out.
I come from a Win32 background, and my primary languages are C and C++. I am getting used to Objective C (though I wish I could use C++ to program in Cocoa). I picked up a copy of Cocoa(R) Programming for Mac(R) OS X (3rd Edition) by Aaron Hillegass, and have been trying to learn cocoa from it for the last few months. Basically, I am having big trouble wrapping my mind around cocoa via the very conceptual high level approach this book takes. I can not for the life of me begin to understand this whole making connections with interface builder.
You specifically asked to avoid the topic, but I'm sure there are several of us who are really tired of iPhone questions who would be happy to try our hand at explaining the User Interface architecture in Cocoa - if you want to try.
I do NOT plan to write production applications in cocoa by hand, but if I could just write a few trivial applications in cocoa by hand without interface builder or nib files, perhaps when I do use interface builder, I won't have such a hard time understanding whats going on.
You can write Objective-C programs using whatever editor and IDE/makefile you want. You can even work with all the non-UI parts of Cocoa to get a feel of how it works. Technically, you could write code using only Carbon and never use Objective-C, but that is really a dead-end.
A good idea might be start looking at doing writing MacOS X kernel extensions. You should still use Xcode, but only as an IDE. The code would all be C++ (or a subset thereof) with no user interface or NIB files. Realistically, that is probably harder than learning Interface Builder, but it is probably the most productive path available to you for developing MacOS X and avoiding Interface Builder.

Yet another Superdrive Won't Work Post

Hello...
I tried to restart or update the FIRMWARE by starting the computer and going through a process of holding down keys.
That didn't work.
I them opened up the eMac and pushed the reset button (PMU or PMI, I think it's called).
That didn't work.
I am just wondering what I need to do to fix this because, granted my eMac is 5 years old, but now it won't recognize any DVDs or CDs, and it did before I started all this. Well, it recognized CDs.
At first the only DVDs it didn't recognize where ones I'd burned from home movies. Now it's all DVDs.
I am in Mac OS 10.3.9. I have 1 GB of Ram. It's an 800mhz Power PC.
I am open to any ideas at this point.
I thank you kindly in advance for reading helping with this.
Evan Jacobs
www.anhedeniafilms.com

First thing to do is run your system through basic maintenance routines. Here is a good page detailing many of the free ones you can download and what they do...
Macintosh OS X Routine Maintenance
http://www.macattorney.com/ts.html
You especially want to run the CRON scripts and repair disk permissions.
If that doesn't help, next thing you might try is to create a new user account then log onto that one and see if the drive acts any differently. If it works, then the problem isn't the drive, but something with the settings of the other user account.
Still another test is to whip out your old Restore/Install discs that came with the computer and see if you can boot off of those (hold down the C key while booting). If you can, then you know the drive works at least. If you can't, maybe the drive really is dead.
Also I ran across this completely crazy fix that there are multiple reports it actually works to get a Superdrive working again...
* Open system preferences.
* Go to international
* Under languages: drag any of the other languages to the top, then drag english back to the top.
* Make sure "order for sorted lists" is set to enlish
* Make sure "work break" is set to english(united states, computer)
* Restart the computer
Patrick

Yet another MPC 1000 L7 Sync post

i searched through the forum archives and didnt find the sync problem im having with my particular setup. im trying to slave the mpc from logic and have the mpc output signal its coaxial spdif.
im using a m-audio 410, logic 7 (duh), and the MPC 1k. i have the midi connected (midi out from the 410 to in the MPC) and the spdif out from the MPC to the 410 spdif in. i set my song settings appropriatly in logic, and the sync stuff appropriatly in the MPC.
now when i hit play in L7, the MPC starts, but the SPL in logic doesnt move at all. and on top of it all, the MPC doesnt read "EXT" like its suppose to in slave mode.
the odd thing is when i do this same setup with the analog outputs, everything works hunky dory.
anybody out there have the same problem?

To be clear, if you pull the spdf out at the interface end does the sync up work? Maybe your interface is seeing the spdf as the master clock or something.

I was trying to move iphoto library to my external hardrive, realised it was incompatible with Mac. The iphoto will not open now, message is "Iphoto library is either in use by another application or has become unreadable". I have read other posts.

Hi,
I was trying to save a copy of my iphoto library by copying images to my external harddrive. I wasn't sure how to do it, realised the hard drive is not compatible. Now the iphoto library wont open and reads "iphoto library is either in use by another application or has become unreadable".
I have tried to use options command and click on iphoto then rebuild yet nothing happens and same error message occurs.
I have gone to my personal drive, desktop, iphoto library, and found file Albumdata.xml and when i click on it, there is a lot of text in it, i am assuming these are all my photos.
I have tried clicking and dragging this file to iphoto app and it doesn't work, as the same error comes up in iphoto being in use or unreadable....
What am I meant to do with albumdata.xml file and how do I reopen Iphoto from here on in?
Please help as I am not technically minded and still trying to understand how to use the Macbook at all as I am used to Microsoft.
Thank you very much,
KS

Rule Number One - NEVER go directly uinto the iPhoto library - there are no user servicable parts in it and making any change no matter how small can corrupt your library and cause data or photo loss
Exactly how were you trying to save a copy of your iPhoto library?
Albumdata.xml does not contain your photos - and again NEVER make any changes to the content of the iPhoto library - no dragging - no changes - never go into the library
We need to know exactly what you did
And probalby the easiest solution is to load your backup from before you messed things up
For reference after you get things working
Moving the iPhoto library is safe and simple - quit iPhoto and drag the iPhoto library intact as a single entity to the external drive - depress the option key and launch iPhoto using the "select library" option to point to the new location on the external drive - fully test it and then trash the old library on the internal drive (test one more time prior to emptying the trash)
And be sure that the External drive is formatted Mac OS extended (journaled) (iPhoto does not work with drives with other formats) and that it is always available prior to launching iPhoto
And backup soon and often - having your iPhoto library on an external drive is not a backup and if you are using Time Machine you need to check and be sure that TM is backing up your external drive
LN

After opening Firefox & getting my info, I go into another application but am unable to open Firefox without Quitting it first. I have the latest update of Firefox. How can I get back into firefox without quitting Firefox?

After opening Firefox, I was always able to in & out of it till I shut down my computer. Now, after opening Firefox, I go to another application then back to Firefox, I have to "Quit" Firefox and reopen. How can eliminate the back & forth of starting & quitting Firefox before I shutdown my computer?

uninstalled firefox ....deleted all files still remaining under mozilla firefox directory in program files ... to avoid having to reprogram all my settings, reisntall all addons as well .. I did not remove anything from mozilla firefox that is stored in either appdata or under the windows users directory (if any)
... the as suggested reinstalled the latest version of the firefox browser using the link you provided in the email ..; tested and several issues still remain present and unresolved ....
so please this is urgent or I will have to jump browsers and start using chrome .. because we work 14 hours a day 6 (sometimes 7) days a week, to get ready for the launch of our newest venture and we cannot lose that much days on browser related issues ... so please instead of putting me through week long step process .. of do this .. do that .. can you please actually look into the issue from your end .. I use firefox for so many, many years thta I deserve this kind of support .. thnx Robert

I am unable to access my LR5.7 Catalog of my recent holiday. I am running Windows 7 (64Bit) and recently installed and then uninstalled DxO Optics Pro. The error message says it "cannot be opened because another application already has it opened.Quit the

I am unable to access my LR5.7 Catalog of my recent holiday. I am running Windows 7 (64Bit) and recently installed and then uninstalled DxO Optics Pro. The error message says it "cannot be opened because another application already has it opened.Quit the other copy of Lightroom before trying to launch" The problem is, that I can only see one copy of LR5 open and cannot locate the ".lrcat.lock" file for the specific catalog I want to open. I have tried re-booting my computer, but this did not work.

Thanks Geoff. I was finally able to locate the ".lrcat.lock" file relevant to the catalog I want to open. Once I deleted it, LR5 was able to access my images. Problem solved. THANK YOU

I am unable to use my external CD player. I am told that the player is being used by another application, and that is not true. I have quit everything and restarted. I've unplugged the unit. I have a fairly new mac mini 10.8. What can I do?

I am unable to use my external CD player. I have a fairly new mac mini 10.8. I am told that the player is being used by another application, but it's not true. I've forced everything to quit and restarted. I've even unplugged the unit and let it rest. I've turned off and unplugged the mac too. I cannot make a CD. Why?

I misread your message. I thought it said I did not have burn support with the Samsung hardware.
When the CD goes in it says You inserted a bland CD. choose an action from the popup menu or click ignore
open finder
open itunes
open disk utility
make this action the default
eject ignore ok
However, when I am making CDs. I am in itunes. That is where my recordings areI haven't tried to do it from this vantage point.
I don't know how to make a screen shot on a mac.
I go to my playlist and click on the little gear icon at the bottom left and I leave things as they are - preferred speed - maximum. I leave it on audio CD - and then I select BURN.
When I tried this the other day, I could not get it to burn, no matter how hard I tried - everything I could think of, using a different CD, force quitting everything I was not using, restarting the computer, unplugging the CD hardware and plugging it back in after a little while, nothing worked. I got that message that said my player was being used by another application every time I tried to make the CD. This took over an hour. I don't know of another way to make a CD on the mac; I was not using another program or application. Now it seems to be working fine. I am burning another copy of something I gave away.
I wish I knew what caused this. It was a real problem Saturday morning.

On G4 System Preferences, Network, I have a dropdown menu that says that my settings have been altered by another application and won't go away when I click ok, I can't work in the Network preferences and it won't respond to be closed. Have to Force Quit

On G4 Powerbook System Preferences, Network, have a dropdown menu that says this has been configured by another application. when press OK it keeps coming on & can't work in System Preferences. It won't even respond to Quit System Preferences and I have to Force Quit to close System Pref.
Any ideas?

Look at this link. http://discussions.apple.com/thread.jspa?messageID=9372513
I did BDAqua's suggestion
To stop the pop-up, Go to System Preferences: Security. Check the box next to "Require password to unlock each secure system preference." Then lock Security.
 Cheers, Tom

"Your photo library is either in use by another application or has become unreadable" How do I regain access to iPhoto. All I get is an instruction to "quit"

When accessingh iPhoto all I get is "Your photo library is either in use by another application or has become unreadable" How do I regain access to iPhoto. All I get is an instruction to "quit"

Hi LarryHN,
I was loading images via a flash memory card which was inserted into a USB holder – during the 'download' the connection was broken [faulty USB connection]. I then re-inserted the card via the USB holder the connection was 're-broken' with a screen message indicating that 'force eject' was an option. I clicked the 'force eject' option and when I re-inserted the card/holder 120 images [approx] were missing and when I tried to open iPhoto the screen messages detailed above were displayed.
Current software is: iPhoto v9.2.3; Snow Leopard v10.6.8.
Using TD's Option 1:
i.e. “hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Repair Database. If that doesn't help, then try again, this time using Rebuild Database” resulted in .
"Your photo library is either in use by another application or has become unreadable" with a window request “quit”
& Option 2 “Download iPhoto Library Manager and use its rebuild function”.
Resulted in the following message:
“The library could not be loaded because an error occurred. The library database could not be loaded; no such table RKVersionFaceContent. The album data file for the library 'iPhoto Library' could not be read” - [my italics]
Followed your instructions, re. 'new library' and it worked perfectly. All I have to do is select 'iPhoto Library2' and proceed as normal.
Thank You very much for your excellent advice and solution.
p.s. And this is completely 'off the wall' as I don't expect a positive outcome, but is it possible that all the images 'deleted' from my flash memory card could be somewhere in/on my HDD? If so, how would I proceed to recover them?
Many thanks again.
im.higgs boson

Yet another "fail to respond".....

I've had a look around on the posts and can't find a problem that quite matches this. I bought my parents a G5 iMac with an external iSight just over a year ago. We've been using iChat happily since then, til today.
Originally I had G4 iMac with iSight on panther. Since then we've both upgraded to Tiger, and I've upgraded to a G5 iMac 2.1 with built in iSight. Still no problems. Just after christmas I invested in a Zoom ethernet modem and tonight was the first time since then we've tried to iChat. Depending on who's trying to accept the chat, they recieve the message that they have failed to respond.
Both firewalls are off and encryption is not enabled. This would suggest to me that it might be my new modem. So I powered up my old G4 connected with my old modem, but still no audio or videochats, with the same error messages.
I don't see why I should be getting the same problem with my old set up too when it worked fine before (G4 running Tiger too).
Any thoughts?

HI Veeto,
Ok your parents may have set up Port Forwarding like this (I can not UPnP listed on this screen shots).
UPnP stands for Universal Pug n Play.
It is one means of making sure the Ports in a cable or ADSL modem are open.
Port Forwarding is another and Port Tiggering is yet another.
Sometimes a cabele modem can be set as a Straight through device much like a USB modem.
An ADSL modem is likely to come with some ports pen by default which allow you to Plug and Play with your Web broswer and Mail applications and Send and get files over FTP.
However iChat uses ports ports above the 1024 threshold for these open ports. This means you have to open the ports.
If you have the Access IP and Default Password and User ID for your 5660ADSL modem then you will be able to do the same.
The page I linked you to has all the ports you need for AIM and Jabber accounts to work.
This is on of the other Zoom's Pages for the same thing. Similar but different.
You should be able to work out how to set yours up.
Ideally you need to use UPnP or Port Triggering to use two computers at one location with iChat as these both allow multiple computer to use the same ports (Port Forwarding does not).
It might be you have newer firmware on your modem than is shown in these pics and you might have UPnP.
http://www.zoom.com/techsupport/adsl/adsl_x3.shtml (Firmware page).
I do not see that it says it has UPnP on thier site.
Ralph

"Network settings have be changed by another application" stuck in loops

I have the exact problem as others with Network System Preferences saying that the settings have been changed by another application. The message goes into a loop that can only be stopped with a Force Quit of the Preferences. I also have the Airport not connecting at start-up without choosing the Network Name from the Airport Pull down menu. I also think it may have started with the last Security upgrade and Java upgrade. I have used the airport utility to reconfig the base station. I discovered a system keychain with a password for the airport that my normal passwords would not open to show what it's password was. I have done many disk permissions and verifications. Any ideas? I would think if this is a Security update error, that Apple would be aware of it by now and post a repair. I have followed some threads on this issue but would rather wait for an Apple fix. There appears to be no way to contact Apple in customer support.

A Fix for "Your network preferences have been changed by another application" Error
In the Library/Preferences/SystemConfiguration/ folder delete the following:
com.apple.airport.preferences.plist
NetworkInterfaces.plist
preferences.plist
com.apple.nat.plist
You will have to re-configure all your network settings since deleting these files will cause them to be returned to defaults.

Yet another "Can I better optimize my iMac or is it time to buy a new one" question

Machine Specs:
Processor: 2.4 GHz Intel Core Duo
Memory: 3 GB 800 MHz DDR2 SDRAM
OS X 10.9.2
My iMac has become cripplingly slow, and I need to decide whether there's anything I can do to fix this or if it's just old and I need a new machine. I am not using the computer for heavy graphics, but opening more than one browser version causes the SBBOD (spinning beach ball of death) -- that happens even when I try to open a new browser tab, and wait forever for applications to open. I have to edit one photo a time in Photoshop Express because it will slow down too much. I thought the problem might be disc space and moved all of my music to an external hard drive; it didn't help. I am only using the machine for internet, productivity apps (mostly writing), occasional Photoshop use; I use it daily but only evenings. I realize that despite being an early adopter I tend to try to run my electronics longer than most but it doesn't seem right that I've reached the end of the line on this particular computer.
Any suggestions, thoughts, advice would be appreciated.

1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem. But with the aid of the test results, the solution may take a few minutes, instead of hours or days.
Don't be put off merely by the seeming complexity of these instructions. The process is much less complicated than the description. You do harder tasks with the computer all the time.
2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. Backup is always a must, and when you're having any kind of trouble with the computer, you may be at higher than usual risk of losing data, whether you follow these instructions or not.
There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
3. Below are instructions to run a UNIX shell script, a type of program. All it does is to collect information about the state of the computer. That information goes nowhere unless you choose to share it. However, you should be cautious about running any kind of program (not just a shell script) at the behest of a stranger. If you have doubts, search this site for other discussions in which this procedure has been followed without any report of ill effects. If you can't satisfy yourself that the instructions are safe, don't follow them. Ask for other options.
Here's a summary of what you need to do, if you choose to proceed:
Copy a line of text in this window to the Clipboard.
Paste into the window of another application.
Wait for the test to run. It usually takes a few minutes.
Paste the results, which will have been copied automatically, back into a reply on this page.
The sequence is: copy, paste, wait, paste again. You don't need to copy a second time. Details follow.
4. You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode, under the conditions in which the problem is reproduced. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
5. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
6. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in the browser window, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
Triple-click anywhere in the line of text below on this page to select it:
PATH=/usr/bin:/bin:/usr/sbin:/sbin:/usr/libexec;clear;cd;p=(Software Hardware Memory Diagnostics Power FireWire Thunderbolt USB Fonts 51 4 1000 25 5120 KiB/s 1024 85 \\b%% 20480 1 MB/s 25000 ports 'com.autodesk.AutoCad com.evenflow.dropbox com.google.GoogleDrive' DYLD_INSERT_LIBRARIES\ DYLD_LIBRARY_PATH -86 ` route -n get default|awk '/e:/{print $2}' ` 25 N\\/A down up 102400 25600 recvfrom sendto CFBundleIdentifier 25 25 25 1000 MB );N5=${#p[@]};p[N5]=` networksetup -listnetworkserviceorder|awk ' NR>1 { sub(/^$[0-9]+$ /,"");n=$0;getline;} $NF=="'${p[26]}')" { sub(/.$/,"",$NF);print n;exit;} ' `;f=('\n%s: %s\n' '\n%s\n\n%s\n' '\nRAM details\n%s\n' %s\ %s '%s\n-\t%s\n' );S0() { echo ' { q=$NF+0;$NF="";u=$(NF-1);$(NF-1)="";gsub(/^ +| +$/,"");if(q>='${p[$1]}') printf("%s (UID %s) is using %s '${p[$2]}'",$0,u,q);} ';};s=(' /^ *$|CSConfigDot/d;s/^ */ /;s/[-0-9A-Fa-f]{22,}/UUID/g;s/(ochat)\.[^.]+(\..+)/\1\2/;/Shared/!s/\/Users\/[^/]+/~/g ' ' s/^ +//;5p;6p;8p;12p;' ' {sub(/^ +/,"")};NR==6;NR==13&&$2<'${p[10]} ' 1s/://;3,6d;/[my].+:/d;s/^ {4}//;H;${ g;s/\n$//;/s: [^EO]|x([^08]|02[^F]|8[^0])/p;} ' ' 5h;6{ H;g;/P/!p;} ' ' ($1~/^Cy/&&$3>'${p[11]}')||($1~/^Cond/&&$2!~/^N/) ' ' /:$/{ N;/:.+:/d;s/ *://;b0'$'\n'' };/^ *(V.+ [0N]|Man).+ /{ s/ 0x.... //;s/[()]//g;s/(.+: )(.+)/ (\2)/;H;};$b0'$'\n'' d;:0'$'\n'' x;s/\n\n//;/Apple[ ,]|Intel|SMSC/d;s/\n.*//;/\)$/p;' ' s/^.*C/C/;H;${ g;/No th|pms/!p;} ' '/= [^GO]/p' '{$1=""};1' ' /Of/!{ s/^.+is |\.//g;p;} ' ' $0&&!/ / { n++;print;} END { if(n<200) print "com.apple.";} ' ' $3~/[0-9]:[0-9]{2}$/ { gsub(/:[0-9:a-f]{14}/,"");} { print|"tail -n'${p[12]}'";} ' ' NR==2&&$4<='${p[13]}' { print $4;} ' ' END { $2/=256;if($2>='${p[15]}') print int($2) } ' ' NR!=13{next};{sub(/[+-]$/,"",$NF)};'"`S0 21 22`" 'NR!=2{next}'"`S0 37 17`" ' NR!=5||$8!~/[RW]/{next};{ $(NF-1)=$1;$NF=int($NF/10000000);for(i=1;i<=3;i++){$i="";$(NF-1-i)="";};};'"`S0 19 20`" 's:^:/:p' '/\.kext\/(Contents\/)?Info\.plist$/p' 's/^.{52}(.+) <.+/\1/p' ' /Launch[AD].+\.plist$/ { n++;print;} END { if(n<200) print "/System/";} ' '/\.xpc\/(Contents\/)?Info\.plist$/p' ' NR>1&&!/0x|\.[0-9]+$|com\.apple\.launchctl\.(Aqua|Background|System)$/ { print $3;} ' ' /\.(framew|lproj)|\):/d;/plist:|:.+(Mach|scrip)/s/:[^:]+//p ' '/root/p' ' !/\/Contents\/.+\/Contents|Applic|Autom|Frameworks/&&/Lib.+\/Info.plist$/ { n++;print;} END { if(n<1000) print "/System/";} ' '/^\/usr\/lib\/.+dylib$/p' ' /Temp|emac/d;/(etc|Preferences|Launch[AD].+)\//s/^\.\/[^/]+//p;' ' /\/(Contents\/.+\/Contents|Frameworks)\/|\.wdgt\/.+\.([bw]|plu)/d;p;' 's/\/(Contents\/)?Info.plist$//;p' ' { gsub("^| ","\\|\\|kMDItem'${p[35]}'=");sub("^...."," ") };1 ' p '{print $3"\t"$1}' 's/\'$'\t''.+//p' 's/1/On/p' '/Prox.+: [^0]/p' '$2>'${p[9]}'{$2=$2-1;print}' ' BEGIN { i="'${p[26]}'";M1='${p[16]}';M2='${p[18]}';M3='${p[31]}';M4='${p[32]}';} !/^A/ { next;} /%/ { getline;if($5<M1) a="user "$2"%, system "$4"%";} /disk0/&&$4>M2 { b=$3" ops/s, "$4" blocks/s";} $2==i { if(c) { d=$3+$4+$5+$6;next;};if($4>M3||$6>M4) c=int($4/1024)" in, "int($6/1024)" out";} END { if(a) print "CPU: "a;if(b) print "I/O: "b;if(c) print "Net: "c" (KiB/s)";if(d) print "Net errors: "d" packets/s";} ' ' /r\[0\] /&&$NF!~/^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./ { print $NF;exit;} ' ' !/^T/ { printf "(static)";exit;} ' '/apsd|OpenD/!s/:.+//p' ' (/k:/&&$3!~/(255\.){3}0/ )||(/v6:/&&$2!~/A/ ) ' ' $1~"lR"&&$2<='${p[25]}';$1~"li"&&$3!~"wpa2";' ' BEGIN { FS=":";} { n=split($3,a,".");sub(/_2[01].+/,"",$3);print $2" "$3" "a[n]" "$1;b=b$1;} END { if(b) print("\n\t* Code injection");} ' ' NR!=4{next} {$NF/=10240} '"`S0 27 14`" ' END { if($3~/[0-9]/)print$3;} ' ' BEGIN { L='${p[36]}';} !/^[[:space:]]*(#.*)?$/ { l++;if(l<=L) f=f"\n "$0;} END { F=FILENAME;if(!F) exit;if(!f) f="\n [N/A]";"file -b "F|getline T;if(T!~/^(AS.+ (En.+ )?text$|POSIX sh.+ text ex)/) F=F" ("T")";printf("\nContents of %s\n%s\n",F,f);if(l>L) printf("\n ...and %s more line(s)\n",l-L);} ' ' /^ +[NP].+ =/h;/^( +D.+[{]|[}])/{ g;s/.+= //p;};' ' /^ +B/{ s/.+= |(-[0-9]+)?\.s.+//g;p;} ' ' END{print NR} ' ' /id: N|te: Y/{i++} END{print i} ' ' / / { print "'"${p[28]}"'";exit;};1;' '/ en/!s/\.//p' ' NR!=13{next};{sub(/[+-M]$/,"",$NF)};'"`S0 39 40`" ' $10~/$L/&&$9!~"localhost" { sub(/.+:/,"",$9);print $1": "$9;} ' '/^ +r/s/.+"(.+)".+/\1/p' 's/(.+\.wdgt)\/(Contents\/)?Info\.plist$/\1/p' 's/^.+\/(.+)\.wdgt$/\1/p' 's/0/Off/p' );c1=(system_profiler pmset\ -g nvram fdesetup find syslog df vm_stat sar ps sudo\ crontab sudo\ iotop top pkgutil PlistBuddy whoami cksum kextstat launchctl sudo\ launchctl crontab 'sudo defaults read' stat lsbom mdfind ' for i in ${p[24]};do ${c1[18]} ${c2[27]} $i;done;' defaults\ read scutil sudo\ dtrace sudo\ profiles sed\ -En awk /S*/*/P*/*/*/C*/*/airport networksetup mdutil sudo\ lsof test );c2=(com.apple.loginwindow\ LoginHook '-c Print /L*/P*/loginw*' '-c Print L*/P*/*loginit*' '-c Print L*/Saf*/*/E*.plist' '~ $TMPDIR.. \( -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 $' '.??* -path .Trash -prune -o -type d -name *.app -print -prune' '-c Print\ :'${p[35]}' 2>&1' '-c Print\ :Label 2>&1' '{/,}L*/{Con,Pref}* -type f ! -size 0 -name *.plist -exec plutil -s {} \;' "-f'%N: %l' Desktop L*/Keyc*" therm sysload boot-args status " -F '\$Time \$Message' -k Sender kernel -k Message Req 'Beac|caug|dead[^bl]|FAIL|fail|GPU |hfs: Ru|inval|jnl:|last value [1-9]|n Cause: -|NVDA$|pagin|proc: t|Roamed|rror|ssert|Thrott|tim(ed? ?|ing )o|WARN' -k Message Rne 'Goog|ksadm|SMC:' -o -k Sender fseventsd -k Message Req 'SL' " '-du -n DEV -n EDEV 1 10' 'acrx -o comm,ruid,%cpu' '-t1 10 1' '-f -pfc /var/db/r*/com.apple.*.{BS,Bas,Es,J,OSXU,Rem,up}*.bom' '{/,}L*/Lo*/Diag* -type f -regex .\*[cgh] ! -name *ag \( -exec grep -lq "^Thread c" {} \; -exec printf \* \; -o -true $ -execdir stat -f:%Sc:%N -t%F {} \;|sort -t: -k2 |tail -n'${p[38]} '-L {/{S*/,},}L*/Lau* -type f' '-L /{S*/,}L*/StartupItems -type f -exec file {} +' '-L /S*/L*/{C*/Sec*A,E}* {/,}L*/{A*d,Ca*/*/Ex,Compon,Ex,In,iTu,Keyb,Mail/B,P*P,Qu*T,Scripti,Sec,Servi,Spo,Widg}* -type f -name Info.plist' '/usr/lib -type f -name *.dylib' `awk "${s[31]}"<<<${p[23]}` "/e*/{auto,{cron,fs}tab,hosts,{[lp],sy}*.conf,pam.d/*,ssh{,d}_config,*.local} {,/usr/local}/etc/periodic/*/* /L*/P*{,/*}/com.a*.{Bo,sec*.ap}*t /S*/L*/Lau*/*t .launchd.conf" list getenv /Library/Preferences/com.apple.alf\ globalstate --proxy '-n get default' -I --dns -getdnsservers\ "${p[N5]}" -getinfo\ "${p[N5]}" -P -m\ / '' -n1 '-R -l1 -n1 -o prt -stats command,uid,prt' '--regexp --only-files --files com.apple.pkg.*|sort|uniq' -kl -l -s\ / '-R -l1 -n1 -o mem -stats command,uid,mem' -i4TCP:0-1023 com.apple.dashboard\ layer-gadgets '-d /L*/Mana*/$USER&&echo On' '-app Safari WebKitDNSPrefetchingEnabled' );N1=${#c2[@]};for j in {0..8};do c2[N1+j]=SP${p[j]}DataType;done;N2=${#c2[@]};for j in 0 1;do c2[N2+j]="-n ' syscall::'${p[33+j]}':return { @out[execname,uid]=sum(arg0) } tick-10sec { trunc(@out,1);exit(0);} '";done;l=(Restricted\ files Hidden\ apps 'Elapsed time (s)' POST Battery Safari\ extensions Bad\ plists 'High file counts' User Heat System\ load boot\ args FileVault Diagnostic\ reports Log 'Free space (MiB)' 'Swap (MiB)' Activity 'CPU per process' Login\ hook 'I/O per process' Mach\ ports kexts Daemons Agents launchd Startup\ items Admin\ access Root\ access Bundles dylibs Apps Font\ issues Inserted\ dylibs Firewall Proxies DNS TCP/IP Wi-Fi Profiles Root\ crontab User\ crontab 'Global login items' 'User login items' Spotlight Memory Listeners Widgets Parental\ Controls Prefetching );N3=${#l[@]};for i in 0 1 2;do l[N3+i]=${p[5+i]};done;N4=${#l[@]};for j in 0 1;do l[N4+j]="Current ${p[29+j]}stream data";done;A0() { id -G|grep -qw 80;v[1]=$?;((v[1]==0))&&sudo true;v[2]=$?;v[3]=`date +%s`;clear >&-;date '+Start time: %T %D%n';};for i in 0 1;do eval ' A'$((1+i))'() { v=` eval "${c1[$1]} ${c2[$2]}"|'${c1[30+i]}' "${s[$3]}" `;[[ "$v" ]];};A'$((3+i))'() { v=` while read i;do [[ "$i" ]]&&eval "${c1[$1]} ${c2[$2]}" \"$i\"|'${c1[30+i]}' "${s[$3]}";done<<<"${v[$4]}" `;[[ "$v" ]];};A'$((5+i))'() { v=` while read i;do '${c1[30+i]}' "${s[$1]}" "$i";done<<<"${v[$2]}" `;[[ "$v" ]];};';done;A7(){ v=$((`date +%s`-v[3]));};B2(){ v[$1]="$v";};for i in 0 1;do eval ' B'$i'() { v=;((v['$((i+1))']==0))||{ v=No;false;};};B'$((3+i))'() { v[$2]=`'${c1[30+i]}' "${s[$3]}"<<<"${v[$1]}"`;} ';done;B5(){ v[$1]="${v[$1]}"$'\n'"${v[$2]}";};B6() { v=` paste -d: <(printf "${v[$1]}") <(printf "${v[$2]}")|awk -F: ' {printf("'"${f[$3]}"'",$1,$2)} ' `;};B7(){ v=`grep -Fv "${v[$1]}"<<<"$v"`;};C0(){ [[ "$v" ]]&&echo "$v";};C1() { [[ "$v" ]]&&printf "${f[$1]}" "${l[$2]}" "$v";};C2() { v=`echo $v`;[[ "$v" != 0 ]]&&C1 0 $1;};C3() { v=`sed -E "$s"<<<"$v"`&&C1 1 $1;};for i in 1 2;do for j in 2 3;do eval D$i$j'(){ A'$i' $1 $2 $3; C'$j' $4;};';done;done;{ A0;A2 0 $((N1+1)) 2;C0;A1 0 $N1 1;C0;B0;C2 27;B0&&! B1&&C2 28;D12 15 37 25 8;A1 0 $((N1+2)) 3;C0;D13 0 $((N1+3)) 4 3;D23 0 $((N1+4)) 5 4;for i in 0 1 2;do D13 0 $((N1+5+i)) 6 $((N3+i));done;D13 1 10 7 9;D13 1 11 8 10;D22 2 12 9 11;D12 3 13 10 12;D23 4 19 44 13;D23 5 14 12 14;D22 6 36 13 15;D22 7 37 14 16;D23 8 15 38 17;D22 9 16 16 18;B1&&{ D22 11 17 17 20;for i in 0 1;do D22 28 $((N2+i)) 45 $((N4+i));done;};D22 12 44 54 45;D22 12 39 15 21;A1 13 40 18;B2 4;B3 4 0 19;A3 14 6 32 0;B4 0 5 11;A1 17 41 20;B7 5;C3 22;B4 4 6 21;A3 14 7 32 6;B4 0 7 11;B3 4 0 22;A3 14 6 32 0;B4 0 8 11;B5 7 8;B1&&{ A2 19 26 23;B7 7;C3 23;};A2 18 26 23;B7 7;C3 24;A2 4 20 21;B7 6;B2 9;A4 14 7 52 9;B2 10;B6 9 10 4;C3 25;D13 4 21 24 26;B4 4 12 26;B3 4 13 27;A1 4 22 29;B7 12;B2 14;A4 14 6 52 14;B2 15;B6 14 15 4;B3 0 0 30;C3 29;A1 4 23 27;B7 13;C3 30;D13 24 24 32 31;D13 25 37 32 33;A1 23 18 28;B2 16;A2 16 25 33;B7 16;B3 0 0 34;B2 21;A6 47 21&&C0;B1&&{ D13 21 0 32 19;D13 10 42 32 40;D22 29 35 46 39;};D23 14 1 48 42;D12 34 43 53 44;D22 0 $((N1+8)) 51 32;D13 4 8 41 6;D12 26 28 35 34;D13 27 29 36 35;A2 27 32 39&&{ B2 19;A2 33 33 40;B2 20;B6 19 20 3;};C2 36;D23 33 34 42 37;B1&&D23 35 45 55 46;D23 32 31 43 38;D12 36 47 32 48;D13 20 42 32 41;D13 14 2 48 43;D13 4 5 32 1;D22 4 4 50 0;D13 14 3 49 5;D12 26 48 59 49;B3 4 22 57;A1 26 46 56;B7 22;B3 0 0 58;C3 47;D23 22 9 37 7;A7;C2 2;} 2>/dev/null|pbcopy;exit 2>&-
Copy the selected text to the Clipboard by pressing the key combination command-C.
7. Launch the built-in Terminal application in any of the following ways:
Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Click anywhere in the Terminal window and paste by pressing command-V. The text you pasted should vanish immediately. If it doesn't, press the return key.
8. If you see an error message in the Terminal window such as "syntax error," enter
exec bash
and press return. Then paste the script again.
9. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know the password, or if you prefer not to enter it, press the key combination control-C or just press return three times at the password prompt. Again, the script will still run.
If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
10. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, there will be nothing in the Terminal window and no indication of progress. Wait for the line
[Process completed]
to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report the results. No harm will be done.
11. When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
At the top of the results, there will be a line that begins with the words "Start Time." If you don't see that, but instead see a mass of gibberish, you didn't wait for the "Process completed" message to appear in the Terminal window. Please wait for it and try again.
If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
12. When you post the results, you might see the message, "You have included content in your post that is not permitted." It means that the forum software has misidentified something in the post as a violation of the rules. If that happens, please post the test results on Pastebin, then post a link here to the page you created.
Note: This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
Copyright © 2014 by Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Use Agreement for the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed.

Safari problem: when I switch back into safari from another application, the menu bar comes up but no tabs or windows. What's going on? Just started yesterday. I have found a workaround: when I Command Tab back to safari, I hit command T to open a new

Safari problem: when I switch back into safari from another application, the menu bar comes up but no tabs or windows. What's going on? Just started yesterday. I have found a workaround: when I Command Tab back to safari, I hit command T to open a new tab and Command W to close it, and my other tabs are visible.
I have tried shutting down, closing tabs, with no success. What's going on and how can I fix it?
Thanks,
Cindi B
PS: I'm not sure of the actual OS level, but I have not allowed it to upgrade to Maverick yet; concerned about it because of a few things I've read...

A Safari extension or third party plugin may be causing the menu bar issue.
From the Safari menu bar click Safari > Preferences then select the Extensions tab. Turn that OFF, quit and relaunch Safari to test. If that helped, turn one extension on then quit and relaunch Safari to test until you find the incompatible extension then click uninstall.
If it's not an extensions issue, try troubleshooting third party plug-ins.
Back to Safari > Preferences. This time select the Security tab. Deselect: Allow plug-ins. Quit and relaunch Safari to test.
If that made a difference, instructions for troubleshooting plugins here.
As for which OS X is installed.
Click the Apple () menu top left in your screen. From the drop down menu click About This Mac.
The version is noted there.
v10.6 Snow Leopard v10.7 Lion v10.8 Mountain Lion
It's your choice whether or not to upgrade to Mavericks. If you decide to do this, make sure your Mac meets the requirements noted here.

Yet another Mac Book Pro (A1211/2.33 GHz) freeze problem

Hi everyone,
I have yet another freeze mystery, if people fancy having a crack at it.
I had this notebook for about 4 and a half years and it served me well until 2 months ago. It is a 15' MBP from December 2008 (A1211) with a 2.33GHz Core 2 Duo and 2GB of RAM.
Now I constantly get lags or freezes while I am using it.It manifests itself via the beachball and a frozen screen. First, I thought it was the hard drive but I replaced it with a tested new one and I still get the same behaviour. The reason I thought it was the HD is that it seems to freeze often when there was a lot of access to HD or memory. For example, firefox would cause a freeze quite often when it was trying to access the cache or history. I get the same behaviour when trying indexing my music for the genius feature. Often when I close applications, it will halt the system for about 2 minutes.
I think the number of lags also correlates with temperature. I am pretty sure that the notebook's heat diffusion properties has deteriorated strongly over the past year as it seems to be using the fans a lot more extensively. The heatsink seems to get really hot these days as well. So my next step would be checking the thermal paste on the heat sink. Before I am going to do that, I want to consider any remaining options as dismantling the laptop up to the heatsink is a bit of a pain.
My gut feeling would be that it has to do either with the memory or maybe some 'bridge' that transfers the data between HD, GPU, CPU and memory. I am aware that bridge is the wrong word and I am simplifying the architecture of the mainboard too much, but I am sure you get what I mean. The data rate between some of those is inhibited.
The reason why I am saying some is that often the system seems overwhelmed by the amount of commands, just sits there and then resumes executing all of them as it had taken a break. This can be easily seen when streaming video in a web browser. I often get the beach ball and my whole screen freezes, but the movie, or at least the sound, keeps running in the background. After a while it usually resumes and shows the movie at the current playing position. Sometimes it doesn't recover, not even after 30 minutes and I have to switch it off.
I hope I provided enough information for you guys to have a think about this.
Any help in this matter would be gratefully appreciated.

Before re-installing the operating system, which might also work, I found this article helpful:
http://macs.about.com/od/usingyourmac/qt/Fix-Spod-How-To-Fix-A-Spinning-Pinwheel -Of-Death.htm
I've followed the directions since they seem to make sense and am waiting for the next Pinwheel of Death. They seem to be saying the same thing you are Chris, but ascribe the problem to 'permissions' which are fixable (gasp) via the OS disc utility.

Yet another Applications/OS X quitting post

Similar Messages

Maybe you are looking for