Yet another Captivate-to-Flash problem

I'm trying to get some Captivate files into Flash MX 2004.
When I try exporting from Captivate, I get a message that I
need to Flash MX2004 installed. I do, but it doesn't seem to
recognise it.
If I try to import into a Flash movie I get a message that it
doesn't recognise the file format.
This is, as you can imagine, not only frustrating but
disappointing. There are way too many problems with this software -
let's hope Version 2 is a big improvement..

Hello tone47b,
I am sorry to hear that you have been experiencing problems
getting Captivate files into Flash. Have you read the
Converting
Captivate to Flash Content - Technote? This might offer you
some assistance.
With regard to importing SWF's into Captivate - You will need
to set the frame rate at
30 fps and publish your SWFs as Flash Player version 6.
HTH
Regards,
Mark
Adobe Community Expert

Similar Messages

Yet Another iPad Wi-Fi Problem

So, I'm having the famous iPad Wi-Fi issue everyone else is. I've tried everything that people have said, yet YouTube rarely works. Some days, it works perfectly, though a little slow. Other days, like today, it doesn't work at all. What's the problem here?

Some things to try first:
1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
4. Go into your router security settings and change from WEP to WPA with AES.
5. Renew IP Address: (especially if you are droping internet connection)
    •    Launch Settings app
    •    Tap on Wi-Fi
    •    Tap on the blue arrow of the Wi-Fi network that you connect to from the list
    •    In the window that opens, tap on the Renew Lease button
~~~~~~~~~~~~~~~~~~~~~~~~~
iOS 6 Wifi Problems/Fixes
How To: Workaround iPad Wi-Fi Issues
http://www.theipadfan.com/workaround-ipad-wifi-issues/
Another Fix For iOS 6 WiFi Problems
http://tabletcrunch.com/2012/10/27/fix-ios-6-wifi-problems-ssid/
Wifi Doesn't Connect After Waking From Sleep - Sometimes increasing screen brightness prevents the failure to reconnect after waking from sleep. According to Apple, “If brightness is at lowest level, increase it by moving the slider to the right and set auto brightness to off.”
Fix For iOS 6 WiFi Problems?
http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
iOS 6 iPad 3 wi-fi "connection fix" for netgear router
http://www.youtube.com/watch?v=XsWS4ha-dn0
Apple's iOS 6 Wi-Fi problems
http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
~~~~~~~~~~~~~~~~~~~~~~~
How to Fix a Poor Wi-Fi Signal on Your iPad
http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Fix-A-Poor-Wi-Fi-Signal-O n-Your-iPad.htm
iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
How to Fix: My iPad Won't Connect to WiFi
http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Connect iPad to Wi-Fi (with troubleshooting info)
http://thehowto.wikidot.com/wifi-connect-ipad
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
 Cheers, Tom

Yet another strange N97 wifi problem!

Hi,
I have a problem with my N97 that doesn't seem to be addressed yet.
I tried to connect via wifi to an internet connection, somehow that connection got placed in the "uncategorized" section under "destinations." SO i chose "move to other destinations" -> "internet" it sorta got moved since I don't see it under "uncategorized" but it doesn't show up under "Internet"!!
I still see the signal when I scan for it, I clicked connect but after I type in the WEP key, it doesn't connect, in fact the thing hangs (only way to get out is to press hang up key). I also cannot add it to access point. Anyone had this problem? I tried restoring factory defaults but doesn't work. Any help?
Thanks in advance!

I hope you've checked that it is not a 'Protected' access point.
By the way, why don't you simply delete this connection and then search again for that wifi signal?
Wish#1: MP3 Tag Editor capable of editing ratings.
Wish#2: Android type Video player, highly efficient player capable of playing all formats.
Wish#3: Without Google Maps (and products), no gadget is worth keeping.

Yet another Music Store Connection Problem

First time iPod/iTunes user. Just Installed iTunes 5.0.1.4.
I Get The Error Message: iTunes could not connect to the music store. The network connection Timed Out.
I tried many of the suggestions that were posted to no avail.
Whatever iTunes is doing it seems to be pretty anti-social when it comes to network I/O. I noticed that when I operate iTunes, IE couldn't see any web sites. So I stopped iTunes, opened a command window and started the command "ping yahoo.com -t". It responded normally and uneventfully. But once I restarted iTunes, the ping results started timing out. I get the same result when I ping my router instead.
Any Ideas ???

Well.... This has been a hot topic in these forums for a long time. I had this problem for at least 6 months without a resolution. The answers usually involve turning off a software firewall like the new Windows XP security center or Norton firewall. Believe me when I tell you I tried everything to fix this including turning off all firewalls. I eventually was able to find a copy of Itunes 4.7 and have been using that successfully (being able to connect to the music store).
I solved all my connection problems yesterday. I started up my disabled Zone Alarm Firewall program. I went to the allowed to pass through program list and clicked allow for all the programs that connect. Now every thing works great and I was able to install the latest Itunes for windows & connect to the store. The Zone alarm is running as well as the windows security center firewall. I think the Zone Alarm has opened up communication ports that the window security won't. I know many of you will think that I am an idiot. Maybe I am but I got the darn thing working. My belief is that this is not an Apple malfunction. I take back all my curses at them.

Yet another iPad mini screen problem

I have a screen issue with my iPad Mini WiFi, i searched the forums but I couldn’t find anything related to my problem.
There are times when I unlock the device (manually or with the smart cover) which the screen gets messed up at the left side only, kinda scrambled and distorted almost like when you try to switch a higher resolution to a monitor and it doesn’t supported.
I don’t know how else to explain it so i made a picture using Photoshop since i can't take a picture: http://i43.tinypic.com/ddkpqr.jpg
When this occurs it goes away after 1 second but it’s happening more and more often now. Could be this a hardware problem?

To answer my question, i found this topic that looks a lot like my problem only in smaller scale: https://discussions.apple.com/thread/2497498?start=0&tstart=0. Looks like a hardware problem after all

Yet another 10.4.7 Problem

Hello eveyone, please help...
I've read through all the post about problems with the update and I fall into the category of "corrupted download" .
-I re-downloaded the update and it was successful,
-Ran the update, and it never came back. (spinning cog, powers off)
-I have tried the cmd-opt-p-r route,
-I have tried the Disk Utils route with the install DVD- no luck- fails with an error "Invaild B-tree node size " message,
-I have tried numerous restarts and and retry with the disk utils.
-I tried the archive and restore from the DVD- the drive does not show up.
- and no, i don't have a full backup of my most recent things, so i would REALLY like to repair this drive, or atleast look into it to pull some things off before wiping the structure competely.
Whats next to try? is there a way to pull data off the drve with a messed up structure??
Dual G5 PPC + MacBook Pro 15 Mac OS X (10.4.6) failed 10.4.7 update
Dual G5 PPC + MacBook Pro 15 Mac OS X (10.4.6) failed 10.4.7 update

HI Jonny, this is the G5? <holding breath>
Let DW do it's thing. It may take quite a while. If DW cannot complete the task, I'd try running AHT ("Apple Hardware Test").
If CD's came with your computer it is on a CD labeled "Hardware Test" To test with CD, insert the CD and restart holding the "c" key until you see the spinning gear.
If DVD insert DVD then:
1. Turn on or restart the computer.
2. Immediately press and hold the Option key. After a few seconds, the Startup Manger screen appearsThe Startup Manager scans for available volumes.
3. Optional: Clicking the circular arrow rescans for other volumes, including NetBoot Server volumes. You can eject any disc in the drive or open an empty tray-loading drive by holding down the Command (Apple) and Period (.) keys. The Command-Period key combination will also close the drive. After inserting a CD capable of starting up your computer, you could rescan for volumes.
4. Click the startup volume you want to use. "Hardware Test"
If hardware test does not mount or does not run bring the computer to Authorized Apple Repair.
-mj
[email protected]

Yet another Newbee having Airport problems

I am new to mac and also my macbook. I have been reading thru the discussions trying to find an answer to my problem. I believe I am not alone! I have a Belkin modem/router and although all my setups say I have Airport connection, I can open Internet Connect and select Airport and my network and it say that I have connection. But as soon as I loose the Ethernet cable.. guess what... No connection!!! PLEASE someone help the NewBee Aussie!

Well I have several macs (and PCs) of different kinds all connecting happily to a number or wireless networks. So OSX works fine so dont expect any 'fix' from Apple anytime soon because there isn't anything for them to fix! I suppose there is an outside chance that there is a problem with your Macbooks wireless card but I think it unlikely, you'd have to try to connect to someone else's network to be sure. In my experience if the airport icon in the menu bar shows you are connected but you can't get an IP address this is almost always either a router glitch which will normally go away if you restart it, or a password problem which should be reported by OSX but often isn't. Firstly I would check the router and its settings. Unfortunately the newer the router the more mechanisms it will probably have to stop people connecting so a good strategy is to start with no security and take it step by step from there. Also make sure you have the latest firmware upgrade applied from the manufacturers website, there usually will be one. 'Auto' -ing everything that can is also a good starting point. If your router keeps logs of traffic enabling these can provide a useful source of diagnostics. Of course once it is working you must introduce at least some form of encryption for your own peace of mind, which brings me neatly on to the next point: passwords. There is a big problem with WEP (well several actually!) in that the way the router translates an english phrase into hex is not always the same as the way the mac does it. So you either need to enter the same hex string into the router and the mac (prefixed by $ for the mac, this is what tells it it is getting hex), or sometimes you can see the hex equivalent generated by the router and then just type that in to the mac. The hex key will be 26 characters long for 128bit WEP eg 23f45fa1f1ba91a6241f7f0eff However if there is not a good reason not to use WPA or WPA2 (such as other older kit you need to connect) then this is much better. Set your router to WPA-PSK (TKIP) or WPA2-PSK (AES) and the Mac will recognise what is required and ask you for the passphrase. In this case you CAN use the same english language phrase in the router and the mac as it always seems to work.
Finally we need to make sure that any bad stuff we've done before is not messing us up now. Trashing the preferences as described in the earlier post is a good plan. Also open your keychain with the KeychainAccess utility (in yr Utilities folder) and delete any wireless network entries that have been saved in there. Stick with it it can be sorted out its just a matter of working methodically step by step until you are successful.

Yet Another Guild Wars 2 Problem

Hey, so I ordered the Digital Version about 4 hours ago and I downloaded the BB app and everything. Now I know people are having trouble opening up the app, but mine seems to be working fine. The problem here is that my order still says it's "in process." My friend ordered the game last night and said he recieved his second email within 20 minutes with the serial number to join the GW2 beta. Why is my email taking so long?

I ordered the Digital Deluxe Version exactly 4 hours ago and I downloaded the BB app and everything is good to this point. The app seems to be working fine, I am logged in at least. The problem here is that my order still says it's "in process." I paid $80 for this product and I have been a loyal Best Buy customer for over 20 years now, but a seemingly simple Digital Download not even starting after 4 hours is absurd.
Why is my game email taking so long? It seems that the whole point of Digital Downloads are to make it easier for the store employees and the customer. I could have driven to the store, actually I could have crawled to the store and back home by now.
I emailed Customer Support and hour ago and so far I have only received this message:
Best Buy Customer,
This message was automatically generated in an attempt to answer your question as quickly as possible.
If you are contacting us to cancel, or modify your BestBuy.com order, please call us at 1-888-BEST BUY. (1-888-237-8289)
Thank You.
Best Buy Customer Care
I would appreciate some assistance, please.
Brian Dixon

Yet another, more difficult palindrome problem

Hi guys,
I also have a Palindrome problem! For this problem, we are given a string and we have to print out all the possible palindromes of all the subsets of this string, in order.
For example, given "ab", the set of subsets would be {a, ab, b, ba} and we'd have to print out:
a
aa
aba
abba
b
baab
bab
bb
Each substring has 2 palindromes (i.e. abc has palindromes abcba and abccba).
I know we can easily generate all the substrings and all the palindromes and then just sort it. However, for a string of 8 characters, we're required to print out all the palindromes in 3.2 seconds! (If the 8 characters are unique, that's over 200,000 lines!).
Any ideas on how to go about this? Is there an elegant recursive solution for this? Would using an ArrayList slow down my program? Is there a faster way to print things?
Thanks a bunch!!!

Hi,
I've actually finished writing it. I've been trying
to speed it up for 2 days now. I've managed to tweak
it from 13 seconds to 7 seconds, but it's still too
slow (i need it to be faster than 3.2 seconds).
Thanks!Who are you? Are you val018?
I have to be a bit stupid, but I don't understand the rules. You say:
given "ab", the set of subsets would be {a, ab, b, ba} O, that I understand, and then you show the example output.
a
aa <-- How do you construct this from the subsets shown?
aba
abba
b
baab
bab
bbThat is. Are you allowed to use the same subset more than once? In that case you have an infinitive result set:
a
aa
aaa
aaaa
etc..
/Kaj

Yet Another EJB/JBoss/Datasource problem

This is my first try at creating an ejb. I got that working, and now i'm trying to hook the ejb to a database via a datasource. I know I'm just doing something stupid and missing a tag or an xml file of a java: or whatever. If you can find this probem, I'll be completely in your debt forever.
I've googled and searched this form to death.
Here're the relevant parts:
META-INF\ejb-ref.xml
      <session>
         <description><![CDATA[Stuff]]></description>
         <display-name>Stuff</display-name>
         <ejb-name>NrcrCore</ejb-name>
         <home>my.ejb.NrcrCoreHome</home>
         <remote>my.ejb.NrcrCore</remote>
         <ejb-class>my.ejb.NrcrCoreBean</ejb-class>
         <session-type>Stateless</session-type>
         <transaction-type>Container</transaction-type>
     <resource-ref>
          <res-ref-name>nrcrds</res-ref-name>
          <res-type>javax.sql.Datasource</res-type>
          <res-auth>Container</res-auth>
     </resource-ref>
      </session>META-INF\jboss.xml
<jboss>
<enterprise-beans>
    <session>
      <ejb-name>NrcrCore</ejb-name>
      <jndi-name>nrcr/NrcrCore</jndi-name>
     <resource-ref>
          <res-ref-name>nrcrds</res-ref-name>
          <jndi-name>java:nrcrds</jndi-name>
     </resource-ref>
    </session>
</enterprise-beans>
</jboss>deploy\nrcr-ds.xml
<datasources>
<local-tx-datasource>
    <jndi-name>nrcrds</jndi-name>
    <connection-url>jdbc:jtds:sqlserver://myserver/nrcr;domain=isledev</connection-url>
    <driver-class>net.sourceforge.jtds.jdbc.Driver</driver-class>
    <user-name>nrcr</user-name>
    <password>mypass</password>
</local-tx-datasource>
</datasources>And the code to connect:
            try{
                 ctx = new InitialContext();
                 if(ctx == null )
                      throw new Exception("No Context Found");
                 ds = (DataSource)ctx.lookup("java:nrcrds");
            catch(Exception e) {
                 System.out.println(e);
            }If you can make this work, I'll be your best friend.

I think it would be better if u develop ejb by using
weblogic Server and X-Doclet tags. Then u don't need
to think about the xml files and their hectic tags.You don't need weblogic server to use x-doclet. It can be done even on jboss. The xml files can be automatically generated with some tool/plugin available with popular IDEs.

After having yet another problem with my MacBook Pro and having to wipe the drive, I am now unable to sync my iPhones etc without erasing all the music on them. Is there a way around this? I have no other library!

After having yet another problem with my MacBook Pro and having to wipe the drive, I am now unable to sync my iPhones etc without erasing all the music on them. Is there a way around this? I have no other library!
iTunes is a mess! It couldn't find it's own libraries and I was forced to create a new one. Now I don't know where my music is or if any's missing.

columbus new boy wrote:
How crap is that?
It's not crap at all.
It's not that simple. For example, I've 3500 songs on my MacBook but don't want them all on my phone, so I have to manually select each song again???
There has to be a solution.
Why not simply make a playlist with the songs you want on the iPhone?
and maintain a current backup of your computer.

Is this yet another problem with 7.5 or is it just me . . .

Upgrade seemed to be fine, at first . . . now I keep getting distortion on songs. It seems to be quite random and just because a song has been distorted when I've listened to it once doesn't mean it will be when I listen to it again! It's driving me insane. Is this yet another bug or have I done something wrong (apart from upgrading to 7.5).

Hi Emlou,
If you have a Windows based operating system such as XP -
It seems to me that you are suffering what I am having the same problem with - the program takes up to much of your computer's processing usage. If you go into your task manager and watch performance as ITunes runs - you will see how much of the total computer usage it is taking at any given moment - that's why your songs are distorted, slowing, garbled, etc - the usage on mine spikes from 11% - 93% AT ANY GIVEN MINUTE! I have no idea why, but I have found that by going to your "Control Panel" and clicking on Quicktime you can adjust audio output to help. Click the audio tab, click Safe Mode Wavout only (checkbox) / Then adjust the "Rate" to 96kHz / Then adjust the "Size" to 16 bit. Close that and shut down and restart Itunes - it might help a little for you.
Maybe someone out there can help us find out why we are suffering with all the CPU usage trouble and how to adjust that spiking.
Thanks!
Paul

Yet another Mac Book Pro (A1211/2.33 GHz) freeze problem

Hi everyone,
I have yet another freeze mystery, if people fancy having a crack at it.
I had this notebook for about 4 and a half years and it served me well until 2 months ago. It is a 15' MBP from December 2008 (A1211) with a 2.33GHz Core 2 Duo and 2GB of RAM.
Now I constantly get lags or freezes while I am using it.It manifests itself via the beachball and a frozen screen. First, I thought it was the hard drive but I replaced it with a tested new one and I still get the same behaviour. The reason I thought it was the HD is that it seems to freeze often when there was a lot of access to HD or memory. For example, firefox would cause a freeze quite often when it was trying to access the cache or history. I get the same behaviour when trying indexing my music for the genius feature. Often when I close applications, it will halt the system for about 2 minutes.
I think the number of lags also correlates with temperature. I am pretty sure that the notebook's heat diffusion properties has deteriorated strongly over the past year as it seems to be using the fans a lot more extensively. The heatsink seems to get really hot these days as well. So my next step would be checking the thermal paste on the heat sink. Before I am going to do that, I want to consider any remaining options as dismantling the laptop up to the heatsink is a bit of a pain.
My gut feeling would be that it has to do either with the memory or maybe some 'bridge' that transfers the data between HD, GPU, CPU and memory. I am aware that bridge is the wrong word and I am simplifying the architecture of the mainboard too much, but I am sure you get what I mean. The data rate between some of those is inhibited.
The reason why I am saying some is that often the system seems overwhelmed by the amount of commands, just sits there and then resumes executing all of them as it had taken a break. This can be easily seen when streaming video in a web browser. I often get the beach ball and my whole screen freezes, but the movie, or at least the sound, keeps running in the background. After a while it usually resumes and shows the movie at the current playing position. Sometimes it doesn't recover, not even after 30 minutes and I have to switch it off.
I hope I provided enough information for you guys to have a think about this.
Any help in this matter would be gratefully appreciated.

Before re-installing the operating system, which might also work, I found this article helpful:
http://macs.about.com/od/usingyourmac/qt/Fix-Spod-How-To-Fix-A-Spinning-Pinwheel -Of-Death.htm
I've followed the directions since they seem to make sense and am waiting for the next Pinwheel of Death. They seem to be saying the same thing you are Chris, but ascribe the problem to 'permissions' which are fixable (gasp) via the OS disc utility.

Yet another Adobe Flash Player zero-day discovered from the Hacking Team breach.

Thanks for the heads up Symantec Matt.

Aaaahhhh yes... remember when an entire day could by without news of a breach or hack or targeted attack? Yeah... neither do I.It will probably shock you all to hear that the Symantec Security Response team dropped a new blog over the weekend outlining a Zero-Day vulnerability in Adobe Flash player. Dig it:Second PoC Exploit for Adobe Flash Player Discovered After the Hackers-for-Hire Company Breach
Yet another Adobe Flash Player zero-day discovered from the Hacking Team breach.Symantec is aware of a second vulnerability (CVE-2015-5122) in Adobe Flash Player that’s associated withHacking Team, the Italian company which recently suffered a major data breach. The existence of the unpatched vulnerability has been confirmed by Adobein itssecurity bulletin.Symantec’s analysis has confirmed that the vulnerability can be successfully exploited...
This topic first appeared in the Spiceworks Community

Captivate 5 AICC Problem

Hi,
I am having problems getting Captivate 5 to produce output files that function correctly with an AICC based LMS. The published presentation either does not produce the correct AICC calls to the LMS or produces no calls at all - not sure at present.
If I use a Captivate 4 based .cp file and publish with Captivate 4, then everything works ok. If I take the same .cp file and load it into Captivate 5 and publish, then the problems occur. So I know the AICC Quiz preferences are correctly selected and the overall publish options are also correct. My problem is that I have designed a new course in Captivate 5 (a .cptx file) that I cannot open with Captivate 4 and publish. So if I can't get things sorted with Captivate 5, then I will have to redo everything in Captivate 4 - and that is going to make me (and my customers) very unhappy!
My understanding is that there are quite a few bugs within Captivate 5 and I just wonder if this is yet another? I'm using the MAC version of Captivate 5. Has anyone else had problems with AICC compatibility with Captivate 5?
As an aside, looking through this forum, I have noticed that some of the bugs with Captivate 5 have been fixed by new / replacement files being sent to individuals directly from Adobe. This doesn't seem like a sensible way of releasing updates! Surely there must be a central repository of these bug fixes? Otherwise, how do I know I have got all the fixes?
Thanks,
Ian.

Dear Ashwin,
I downloaded and updated the CPSwf9Template.dll file and now the course published in AICC will launch and play, however, it will not communicate the “Complete” command to the LMS.
See the error 404 for MMTracking.swf and now there is a new file refered to: crossdomain.xml
This is a simple course of 20 slides, self paced, score based upon the number of slides viewed. I will be glad to send you the source files.
Thank you,
Gloria

Yet another Captivate-to-Flash problem

Similar Messages

Maybe you are looking for