Yet another "certificate expired" post

I've tried all the solutions that I've found so far none have worked...tried setting the clock back, application manager settings-software inst.:all, online cert check: off, tried this: /t5/Pool-of-Knowledge/5800-XM-quot-Expired-Certificate-quot-error-message/td-p/442778 , application ...
still get the "certificate expired" error
5800 XpressMusic
software version v 40.2.005
Am I sol?

try to sign your app(s) through Opda site.
If you want to thank someone, just click on the blue star at the bottom of their post

Similar Messages

Yet another Gmail IMAP post

I am still fairly new to the mac so bear with me. I try to set up my Gmail account in mail as a IMAP account, (currently it is set as a POP account, and works just fine) when I try to use notes and have it show up on the server, notes goes nuts and keeps repeatedly sending me the same note over and over. I finally have to disconnect it from the internet delete the account, and reconnect to the internet. What is this problem? I have searched for an answer, but none were any help.
Thanks for any help

Hi Devon Dave. I thought as muchbut the weird thing is from the moment I transfered to Bt I have had almost 18 months of trouble free BB and phone then suddenly..... BB dropouts for no apparent reason and the horrible crackly phone line. I shall post again tomorrow after the engineer has been. Its definetly the incoming line as I am currently plugged into the master socket and if I remove all my filters, unplug BB the noise is still there. Its lucky I have such a good deal on my iphone so I can use that for short calls but my lovely wife is getting a tad **bleep** off to say the least.
Watch this space for a new post tomorrow.

Yet another speed issue posting

Dear BT Bods,
I don't know why having subscribed BT Infinity on the promise of better speed and stability that I now find niether to be the case, and beginning to regret ever buying it.
So to cut the chase, and save your time and mine, I am a senior architect working for the core network of a very large UK and global operator, so spare me the script and the brush overs.
I live in Greenford, postal code area UB6 8xx.
The service is painfully slow, and utter rubbish when it comes to streaming anything, and that's nothing to say of the 75Mb/25Mb speed check I did prior to ordering the line.
To cut a very long story short: I have just paid my first bill, and unless the is sorted immediately, then I am going to formally write to you to disconnect the service, and I don't care what the Ts&Cs say - we can always tango in court if it comes to that. I will not be bullied into a 1-year (dis)service.

Probably worth running the speedtest at http://speedtest.btwholesale.com/ and after the test choose ‘Further Diagnostics’ and post the speeds and the profiles that this gives. The mods will want to see this anyway when they get time to process your issue.
I assume you are running over ethernet, not wireless? You could try ruling out HomeHub issues by making a direct PPPoE connection from your computer to the modem (user: [email protected], password: bt will work).
Check the telephone ciruit has not been star wired: with extensions coming off junction boxes between the incoming telephone line feed and the master socket. That's a fairly common mistake than can lead to instability.
Don't forget that the service guarantees for domestic broadband are very different from those expected for the core network of a very large UK and global operator. However, for most people Infinity does provide a fast and very stable connection.

YAXUP (Yet Another Xorg7 Upgrade Post)

I've finally solved all my former problems with Arch (wireless, printer), so I needed a new challenge. I decided to answer Y instead of n to the pacman quiz question: replace xorg with xorg-server? I assumed I had some sweaty hours ahead of me, but I've gone through the same procedure on my work computer (which I only use to try out things like this before I do them on the laptop).
I was right: there were some problems alright, but nothing that I couldn't eventually fix, more or less, thanks to info in this forum.
Below are some problems that remain, either as problems or as puzzling things which may or may not turn out to be more problematic. I currently have a running machine. Can't say I notice much of a difference so far, but then again, I've mostly been editing xorg.conf in a non-x-shell so far :-)
sound:
Error message on startup:
device /dev/dsp can't be opened (No such file or directory)
The sound server will continue, using the null output device.
The pcspeakers, which have never bothered me, suddenly act up. I have added pcspkr to the blacklist, so that should be ok, but I assume that this might be related to the sound problem.
In /dev there is no dsp anywhere, and if I run the alsa daemon, it says that no sound cards are found. (I have an intel 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) AC'97 card, which alsaconf found, but it still doesn't work)
I managed to get it up again with modprobe snd-intel8x0, but it should have been loaded by hwdetect, shouldn't it...? At least, hwdetect --show-modules finds it, so why didn't it load?
Wireless:
my wireless connection has been on eth1 until now, but after the upgrade, it was considered to be on eth0 instead. I've changed all the eth0 to eth1 and vice versa in rc.conf, /etc/conf.d/wireless, and /etc/network-profiles/<wireless profile>, and now it's working again, but I hope I won't have to go through that every time...?
Fonts:
Firefox has problems with fonts. The default font at this site is Verdana, which I have installed, but Firefox displays it as Times (I believe it is).
I changed the default font setting in about:config from Bitstream Sans Vera to some other font, and true enough, that other font was used. So perhaps the problem stems from the Bitstream package, which, I believe, was updated at the same time as I updated xorg? But why should FF look for Bistream at all, when Verdana is called for...? Oh well, this may perfectly well be a FF problem and not xorg-related.
I will look more into the font business, and it seems that most other apps behave themselves.
Mesa:
I've seen it mentioned several times here that mesa is deprecated. Still, if I try to remove it, I get the following error message:
error: this will break the following dependencies:
mesa: is required by jasper
mesa: is required by xorg-clients
mesa: is required by openexr
mesa: is required by qt
mesa: is required by xscreensaver
so I left it in place. Annoying: it seems to slow down opengl (glxgears: c. 500 fps, as opposed to > 1000 before the 'upgrade'), and it conflicts with celestia, which I had to remove. I miss my stars... I want to fly over the surface of Saturn, browse the perimeters of Alpha Centauri,...
[** hits himself hard on the head to get out of poetical mode]
but what do I do?
Desktop:
I have set the kde desktop to display icons for all partitions, mounted and unmounted, but none of that is anywhere to be seen. I can access the data alright, so it's not much of a problem (and I mostly use fluxbox anyway), but I wonder where they went...
Might this have to do with adesklets, which I have installed at more or less the same time as xorg7?

2MrGreen:
I don't have anything like that in the xorg.conf. Here's my file, in case you still need something to look at.
Section "ServerLayout"
Identifier "XFree86 Configured"
Screen 0 "Screen0" 0 0
InputDevice "Keyboard0" "CoreKeyboard"
# PS/2 Mouse not detected
# Serial Mouse not detected
InputDevice "USB Mouse" "CorePointer"
EndSection
Section "ServerFlags"
Option "AllowMouseOpenFail" "true"
EndSection
Section "Files"
RgbPath "/usr/share/X11/rgb"
ModulePath "/usr/lib/xorg/modules"
FontPath "/usr/share/fonts/75dpi"
FontPath "/usr/share/fonts/75dpi:unscaled"
FontPath "/usr/share/fonts/100dpi"
FontPath "/usr/share/fonts/100dpi:unscaled"
FontPath "/usr/share/fonts/TTF"
FontPath "/usr/share/fonts/cyrillic"
FontPath "/usr/share/fonts/misc"
FontPath "/usr/share/fonts/misc:unscaled"
FontPath "/usr/share/fonts/Type1"
FontPath "/usr/local/share/fonts"
FontPath "/home/eyolf/.fonts"
EndSection
Section "Module"
Load "ddc" # ddc probing of monitor
# Load "GLcore"
Load "dbe"
Load "dri"
Load "extmod"
Load "glx"
Load "bitmap" # bitmap-fonts
Load "type1"
Load "freetype"
Load "record"
EndSection
Section "InputDevice"
Identifier "Keyboard0"
Driver "keyboard"
Option "CoreKeyboard"
Option "XkbRules" "xorg"
Option "XkbModel" "pc105"
Option "XkbLayout" "no,us"
Option "XkbOptions" "grp:alt_shift_toggle"
EndSection
Section "InputDevice"
Identifier "Serial Mouse"
Driver "mouse"
Option "Protocol" "Microsoft"
Option "Device" "/dev/ttyS0"
Option "Emulate3Buttons" "true"
Option "Emulate3Timeout" "70"
Option "SendCoreEvents" "true"
EndSection
Section "InputDevice"
Identifier "PS/2 Mouse"
Driver "mouse"
Option "Protocol" "auto"
Option "ZAxisMapping" "4 5"
Option "Device" "/dev/psaux"
Option "Emulate3Buttons" "true"
Option "Emulate3Timeout" "70"
Option "SendCoreEvents" "true"
EndSection
Section "InputDevice"
Identifier "USB Mouse"
Driver "mouse"
Option "Device" "/dev/input/mice"
Option "SendCoreEvents" "true"
Option "Protocol" "IMPS/2"
Option "ZAxisMapping" "4 5"
Option "Buttons" "5"
EndSection
# Auto-generated by Archie mkxcfg
Section "Monitor"
<skipped all the monitor settings>
EndSection
# Auto-generated by Archie mkxcfg
#Section "Device"
# Identifier "Card0"
# Driver "i810"
# VendorName "All"
# BoardName "All"
#EndSection
Section "Device"
Identifier "device0"
VendorName "Intel Corp."
BoardName "Unknown Board"
Driver "i810"
BusID "PCI:0:2:0" #may vary?
EndSection
Section "Screen"
Identifier "Screen0"
Device "device0"
Monitor "Monitor0"
DefaultColorDepth 16
SubSection "Display"
Depth 1
Modes "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 4
Modes "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 8
Modes "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 15
Modes "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 16
Modes "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 24
Modes "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 32
Modes "1024x768" "800x600" "640x480"
EndSubSection
EndSection
Section "DRI"
Mode 0666
EndSection

Yet another muse support post: Exit Code 7, ERROR: DW050:

I am so tired of this. I think I've used muse, problem free, once in the past 2 weeks. Here is the latest problem after an attempt to reinstall in effoert to fix an earlier problem.
I click install, it extracts the files, then installs them but bails anywhere from 35%-99%. Then i click "more details" and it opens the browser to display:
                    ++++++++++
Exit Code: 7 Please see specific errors and warnings below for troubleshooting. For example, ERROR: DW050 ...
-------------------------------------- Summary --------------------------------------
- 0 fatal error(s), 1 error(s), 0 warning(s)
ERROR: DW050: The following payload errors were found during install:
ERROR: DW050: - Adobe Muse: Install failed
                    ++++++++++
I'm a creative cloud member and have had no issues with any of the other programs of camparable significance; a few bugs here and there, but this muse product seems to have been a good idea but a little undercooked as far as my experience goes.
Unacceptable for muse memebers to be locked out of the programs they're paying for, but much more important, depend on. I've been a memeber for 2 weeks and it's been nothing but headache with muse. Muse is the product which sold me on becomming a member, now it's the only thing keeping me from publishing the work I've done on all the other programs.

Hi,
I apologize that you've ran into so many issues! Are you installing via the Adobe Applicatoin Manager? If so, try making sure Muse is completely uninstalled first -- if you're on Mac you can drag Muse to the trash and empty the trash, if you're on Windows there may be two entries for Muse under Uninstall Programs. You can search "Muse" in the upper right to filter. Make sure they are both uninstalled. You can then try via the Adobe Application Manager again.
If this still fails to work, please try installing with the following direct download links of Muse (click whichever OS you are using):
Latest Muse Mac: http://www.adobe.com/go/muse_latest_mac
Latest Muse Win: http://www.adobe.com/go/muse_latest_win
Please let me know if this helps.
Thanks,
Colby

YASPP: Yet Another Stacksize Problem Post

Hi,
I've just installed the latest community version of Opensolaris, along with the beta of sun studio 12 on a 16-way 32GB amd64 machine. So far this machine has been running with linux+intel 9.1 compilers.
When I tried to run our openmp code, after solving a (very few) porting issues, I found out that it runs fine for the "minimal size" problems. For the minimal size code to run i have to set the stack size to at least ~45056kb (44MB).
However the medium size problem needs exactly 8 times more memory. If I try to set the stack size to 360448kb, I get an "unlimited" stack size, and the program crashes. I guess that by unlimited, the system means I have hit the maximum limit for the stack size. Is there any way to increase it?

It's a bug in the compiler. Let's look at your example program from the OpenSolaris forum:
program stack
implicit none
integer*8, parameter :: k=1024
integer*8, parameter :: s=512*k*k/4
integer,automatic :: foo(s)
integer*8 i
print*, 'allocating:', s/1024*4,'kbytes'
!$omp parallel do private(i)
do i=1,s
foo(i)=1
end do
!$omp end parallel do
pause
print*, foo(1),foo(s)
print*, 'worked'
end program
If I change s to 512k, then look at the assembly code, this is what I see:
$ f90 -O3 -m64 -xarch=sse3 ompstack.f90 -S
$ grep 'subq.*%rsp' ompstack.s
subq $32,%rsp
subq $524392,%rsp ;/ line : 1
That second "subq" instruction is reserving space on the stack for the array. Now if I restore s to 512M, I see this:
devtools-x4200-0$ f90 -O3 -m64 -xarch=sse3 ompstack.f90 -S
devtools-x4200-0$ grep 'subq.*%rsp' ompstack.s
subq $32,%rsp
subq $104,%rsp ;/ line : 1
Looks as though the code that computes the amount of space to reserve on the stack is overflowing. I have filed bug 6541518.
The program will work if you remove the "automatic" keyword from the variable declaration. Most likely, your OpenMP program will also work if you remove "automatic" keywords. Alternatively, you could change the automatic variables to local allocatable variables. Of course, you would then have to insert an allocate statement at the beginning of the procedure.

Certificate expired

Hello,
I have a problem on a linux ZLM server.
My certificate seems to be expired. Through the web interface I cannot loggin to the zlm server.
The error I receive in my browser :
Error: The LDAP server ("ldap://zlm01.roj.just.fgov.be:10636") appears to be down. Make sure ndsd is running on the server.
everything is running.
In the logs I see something of certificate expired .
To test I changed the date of my server an after this I could login without any problems.
Any Ideas ??
Thanks
Erik Vandenputte.

On Tue, 14 Sep 2010 09:06:03 +0000, vdpuerik wrote:
> Is there no commandline way to do this on the linuxserver itself ?
If you are not familiar with the edirectory administration it is better
to use console one. There is a command that might fix it but that also
changes a few things in the edirectory configuration and then it must be
configured back that further ZLM updates will not have problems with it.
Therefor use consoleone, it's not that complicated.
I guide you through:
1. start consoleone, if no login window appears, click on the tree symbol
user name: admin
password: <the password of the ZLM Administrator>
tree: the full dns name of the zlm server or the ip address of it
context: system
-> then login, if that doesn't work you can also try to just enter "\
\<zlm server ip address>" in start / run. Then the novell client would
open a login box and you can use the same data as above
2. on the left side expand the TREE entry
3. select the system below and notice that you see on the right side
certificates called:
SSL CertificateIP
SSL CertificateDNS
IP AG <xx.xx.xx.xx>
DNS AG <full dns name>
Those certificate were created during the ZLM server installation and
were valid for two years. You do not need to touch them, you can create
another one beside. That step is described in the cool solution article I
posted before. Create anew certificate which is valid for 5 years assign
it to the zlm server and restart the zlm services and everything should
be back.
Rainer

ISE - What happens when the on-boarded certificate expires?

I'm trying to design a good BYOD deployment model but have a few questions that need direct answers. I have down how to go about on-boarding and getting a certificate on a device, the ISE provides great flow for this to happen in many ways. My questions come from a design perspective before and after the BYOD deployment is completed.
1. Figuring out a method to validate the device is a Corporate asset or a BYOD asset.
     (I don't want to install a certificate on just any device, or perhaps I do but I need to give permissions to all resources if its a Corporate Device, and more resitrictions if it's BYOD, so how do I figure this out during the provisioning phase?)
     a. Use MDM (May not have one, or if you do we are still waiting on ISE 1.2 for that integration)
     b. Build a Group for provisioning admins, if user PEAP-MSCHAPv2 account is from this group install a certificate. (issue here is that the end user looses administration of the device in the my device portal as the device is now registered to the provisioning admin)
     c. Pre-populate MAC into ISE as all Corporate devices should be provisioned by I.T. before they go to the end user (I think this is good but can see push back from customers as they don't want to add more time to the process)
     d. Certs on any IOS or Android device, provide access based on user group and do not worry if device is Company asset or not (I believe that this is the easiest solution and seems to be what I find in the guides)
     e. Other options I have not thought about, would love input from the crowd
2. What happens to the device once the Certificate expires?
     (I don't know the answer to this, my thought would be the user or device will fail during the authentication policy and this creates a mess)
     a. Tell the user to delete the profile so they can start all over again (creates help desk calls and frustrated users)
     b. Use MDM for Cert management (may not have one)
     c. Perhaps the client uses SCEP to renew based on the cert template renew policy and there are no issues (this is me wishing)
Would appreciate some feed back and would like to know if anyone has run into these issues.

Neno,
Sorry but I don't have any other info on using a public CA, Cisco says to use internal CA's for PKI. I think the best practice in 1.2 comes out will be to use one interface for Web Management and a different interface for Radius, profiling, posture, and on boarding. This way you can use your private CA for EAP and a public CA for web traffic. Have you tried a public CA bound to management and a private CA for EAP yet?
I did do a session on EAP-TEAP, they explained how it will work and also discussed EAP-FASTv2. EAP-FASTv2 is available now but you must use anyconnect as your supplicant. Microsoft and all other vendors will have EAP-TEAP native once it is fully released and comissioned as it will be the new gold standard for EAP. It will support TLS, MD5, and CHAPv2. If you are interested I have the PDF of the presentation I attended that shows the flow of how EAP-TEAP will work. This is much better than wasMachineAuthenticated and machine auth caching, which has many down falls.
I currently do machine and user auth I just don't require them. If Machine auth then allow machine on vlan-x with access to AD, DNS, and blah blah. Then a seperate rule to say user auth gets more access, although I require EAP-TLS for both and if you think about it you are accomplishing the same thing if your PKI is setup correctly. Make it so users and machines can only auto enroll, that way you know the only way they got their cert was from GPO policy. I won't go into anymore detail, but there is lots you can do.

Computer certificates expiring within 6 weeks disappearing from machines when computer certificates from two certificate authorities are present

2008 R2 single tier enterprise certificate authority with root certificate expiring within 6 weeks, also domain controller
2012 R2 single tier enterprise certificate authority with root certificate valid for more than the next year, also domain controller
Both servers are approved as certificate authorities for the domain and can issue computer certificates using the computer certificate template. There is a group policy object applied to all workstations that contains an automatic computer certificate request,
but the actual "certificate services client auto-enrollment" element is "not configured". This process seems to work like a round robin in that computers with no certificate can wind up with a certificate from either certificate
authority. I need all PCs to have both certs for a DirectAccess migration. I have successfully used SCCM to ensure all PCs have both certificates using compliance rules and a script using certreq.exe.
A machine will keep both certs until the older computer certificate moves into the 6 week window of expiration, then it gets purged. I have observed this behavior for over a month, even when the CA root certificate wasn't so close to expiring. I
can't figure out what setting is triggering the purge, but need to stop it. Maybe it's coming from default settings in local machine policy for an element that should be disabled in the group policy object supplying the automatic certificate request?
The worst part of this issue is that I can't recreate the purging behavior with gpupdates or restarts on my test machines.

You should not be using Automatic Certificate Request Service (ACRS) for this - it was designed for Windows 2000 and is generally deprecated. Secondly, the reason it is acting like a round-robin as you describe it, is that templates are generally configured
to attempt to renew within 6 weeks of their expiration. Since the 2008 R2 CA is expiring within 6 weeks, it cant issue anything longer than its own remaining lifetime. It is a well known issue that issuing a certificate within the renewal period will cause
problems.
What you should do it use AutoEnrollment and issue a certificate with a very small renewal period (1 week perhaps) by creating a custom V2 template and issuing that from your 2008 R2 CA. Then on the 2012 R2 CA you will need ANOTHER template, as the computer
will only enroll for a certificate from each template. This one can be configured with a normal lifetime and renewal period.
Mark B. Cooper, President and Founder of PKI Solutions Inc., former Microsoft Senior Engineer and subject matter expert for Microsoft Active Directory Certificate Services (ADCS). Known as “The PKI Guy” at Microsoft for 10 years. Connect with Mark at http://www.pkisolutions.com

What happens if the certificate expire on a ISE PSN

What happens if a PSN certificate expire? Does all other nodes in the cluster looses the communication channel to that PSN node?
What is the procedure to install a new certificate on a PSN node with the expired certificate?
Does the PSN node still handle client RADIUS requests that does not depend on the PSN cerfificate?
Tanks!

You definitely want to renew the certs before they expire. Otherwise the effects can be very devastating to your ISE environment depending on what the certificates are used for :) Below are a couple of links that you can use to obtain more info on both of your questions:
ISE version 1.2:
http://www.cisco.com/c/en/us/support/docs/security/identity-services-engine/116977-technote-ise-cert-00.html
ISE Version 1.3:
http://www.cisco.com/c/en/us/td/docs/security/ise/1-3/admin_guide/b_ise_admin_guide_13/b_ise_admin_guide_sample_chapter_01000.html#concept_D7826198A3304303AD046DB981DA4FE6
Thank you for rating helpful posts!

Display hints, custom format method in VO, is there yet another way?

Did you experience the same and had a solution?
Hi,
I am using JDeveloper 10.1.3.4 and looking for yet another way of customizing the display of an attribute of a view object.
I have two tables: BILL and AWARDS, with composite foreign key relationship (on the LDAP_UID and TERM fields) between them, as illustrated below.
The BILL table:
NAME       LDAP_UID    TERM   CREDIT_HRS
Tom Smith tom.simth   200902       12.5
Jane Lopez jane.lopez 200906        4.0
The AWARD table:
LDAP_UID    TERM SOURCE     APPLIED
tom.smith 200902 Perkins     2000.00
tom.smith 200906 Direct      1300.00
jane.lopez 200906 CN           500.00 At the business data model level, this is master(Bill)/detail(Awards) relationship. Bill is dragged from the data control palette to the page and displayed as a form, and Awards is dragged to the page as a table. When tom.smith logs in and chooses the 200902 TERM, the master and detail are joined on tom.smith=tom.smith and 200902=200902, so the $2,000.00 of Perkins loan is retrieved for him:
Name Tom Smith
Term 200902
Source    Applied
Perkins   $2,000.00That works fine but not user friendly: the values in the TERMS column are a bit cryptic and need to be displayed in plain English, i.e., 200902 should be displayed as "Spring 2009" and 200906 as "Summer 2009". The display hints in the VO can not handle this. The only other way I know is writing a method in the Row class of the VO to do the translation. And this is the result:
Name Tom Smith
Term Spring 2009
Source        Applied
No rows yet   Obviously, "Spring 2009" is used not only for display, but also for joining the master and detail tables. Of course "Spring 2009"!=200902, therefore no detail is retrieved for the user.
Question is: is there yet another way to customize the display, that does not affect the join of master and detail tables?
Many thanks for your help!
Newman

Hi, Chris,
That works!
I found the chapter where transient attribute is explained and an example is given creating a transient attribute in the entity object. It turned out that transient attribute works both in entity object and view object. I did it in the VO and it solves my problem.
I spent hours of time before posting that question, trying two different ways but neither worked. Your one sentence saved me a lot of time. I do appreciate you help very much!
Truly,
Newman

Distribution certificate expiring 3/12. Distribution profile expiring 9/12.

Our Distribution certificate expires tomorrow but the profile is active till 9/12.
So my Q is:
a) If i build something on 3/13 will XCode error out at build time in the CodeSign step?
b) If i build something on 3/12 and submit to Apple on 3/13 will it accept since the Profile is valid?
I am just trying to figure out if i need to wait until i have a new certificate and a new profile before i build my apps.
Thanks,
-TRS

I have not re-newed the certificate so my Q has no relevance now
In any case the answer is that the certificate has to be valid otherwise XCode does not show the profile as selectable. It indicates a disabled information message in the drop-down menu.
Thanks to those who spent their valuable time reading my original post.
-TRS
-TRS

SSL Re-encryption with Portal and Web Dispatcher: certificate expired

Hello,
I am trying to set up HTTPS connection to the Portal through SAP Web Dispatcher. We are using SSL Re-encryption. I think I got everything set up correctly. When trying to access through a Web browser the web dispatcher trace file shows error message 'certificate expired'. Looking at the Portal (Visual admin - Keystore) I am pretty sure it is the service-ssl with localhost. It is expired. Two questions:
- is it correct that it uses localhost or am I missing anything?
- How would I recreate the certificate? (I am sure it is somewhere in the Online documentation, but haven't found it yet). Can I do this while the Portal is productive without breaking the normal access (http) to the Portal. This is our Production portal.
Thanks,
Ingrid

Hi,
Go thru the contents of SAP Note,
685306 -Enabling SSL and renewing the J2EE certificate
And also the help contents in,
http://help.sap.com/saphelp_nw04/helpdata/en/65/6a563cef658a06e10000000a11405a/content.htm
These might of some help to you !
Regards
Srinivasan T

Yet another "fail to respond".....

I've had a look around on the posts and can't find a problem that quite matches this. I bought my parents a G5 iMac with an external iSight just over a year ago. We've been using iChat happily since then, til today.
Originally I had G4 iMac with iSight on panther. Since then we've both upgraded to Tiger, and I've upgraded to a G5 iMac 2.1 with built in iSight. Still no problems. Just after christmas I invested in a Zoom ethernet modem and tonight was the first time since then we've tried to iChat. Depending on who's trying to accept the chat, they recieve the message that they have failed to respond.
Both firewalls are off and encryption is not enabled. This would suggest to me that it might be my new modem. So I powered up my old G4 connected with my old modem, but still no audio or videochats, with the same error messages.
I don't see why I should be getting the same problem with my old set up too when it worked fine before (G4 running Tiger too).
Any thoughts?

HI Veeto,
Ok your parents may have set up Port Forwarding like this (I can not UPnP listed on this screen shots).
UPnP stands for Universal Pug n Play.
It is one means of making sure the Ports in a cable or ADSL modem are open.
Port Forwarding is another and Port Tiggering is yet another.
Sometimes a cabele modem can be set as a Straight through device much like a USB modem.
An ADSL modem is likely to come with some ports pen by default which allow you to Plug and Play with your Web broswer and Mail applications and Send and get files over FTP.
However iChat uses ports ports above the 1024 threshold for these open ports. This means you have to open the ports.
If you have the Access IP and Default Password and User ID for your 5660ADSL modem then you will be able to do the same.
The page I linked you to has all the ports you need for AIM and Jabber accounts to work.
This is on of the other Zoom's Pages for the same thing. Similar but different.
You should be able to work out how to set yours up.
Ideally you need to use UPnP or Port Triggering to use two computers at one location with iChat as these both allow multiple computer to use the same ports (Port Forwarding does not).
It might be you have newer firmware on your modem than is shown in these pics and you might have UPnP.
http://www.zoom.com/techsupport/adsl/adsl_x3.shtml (Firmware page).
I do not see that it says it has UPnP on thier site.
Ralph

Yet another export issue with Aperture 3

Judging by a search of topics, there seem to be a myriad of problems associated with getting files out of Aperture, some of which represent occult setting issues, others which seem to be actual bugs. I've run into an issue which seems to defy categorization, and I'm not sure if it's me doing something wrong, or if it is actually yet another bug with this software. I've been an Aperture user since 1.0 and I have to say the current version I'm running (3.4.3) is by far the worst yet. Anyway, enough whining. Here are the issues:
I'm running Aperture on a 6 core Mac Pro with Lion 10.7.5. There are two thing happening.
1. Exporting JPEGs is INCREDIBLY slow - perhaps as long as 4 or 5 minutes for a 3MB file.
2. This is the one driving me batty right now. Tried exporting a batch of images as JPEGs at the 50% original size setting. The master files are large 16 bit TIFF images from Nikon D800 RAW files, post-processed in Nik HDR Efex Pro 2. They are 80-100MB in size. When I export the images to a file on my Desktop, it consistently exports 6- 10 KB thumbnails. I've checked and rechecked my export settings and can find nothing amiss there. Has anyone else had a similar experience? Could the view I'm working in have anything to do with this? I work 95% of the time in split view.
Thanks,
Russ

I agree that there re a lot of posts about exporting, but a very large number of them refer to the same thing, and it's not a bug, but rather a misunderstanding.
For instance:
Tried exporting a batch of images as JPEGs at the 50% original size setting.
Okay.
The master files are large 16 bit TIFF images from Nikon D800 RAW files, post-processed in Nik HDR Efex Pro 2
Not relevant.
They are 80-100MB in size.
Not relevant either.
Why?
Because size refers to the dimensions of the image. So a 1,000 x 1,000 pixel image exported at 50% will turn out as 500 x 500 pixels.
Were you expecting a jpeg between 40 and 50 MB? That's Jpeg quality or the amount of compression applied to the image. And as you're compressing a lossless format (tiff) to a lossy one, and one with an aggressive compression algorithm, he resulting Jpeg, even at high quality, will be much, much smaller, more likely in the 6 - 8 MB range.
That's the nature - and indeed the point - of Jpegs.
So, if you're getting 6 - 10 kb images, you're exporting at a very low Jepg Quality.
This may also explain why it's taking so long to export. Getting rid on 99.99% of the data and compressing into 10kb is always going to take time.

Yet another "certificate expired" post

Similar Messages

Maybe you are looking for