Yet another question; sorry, I'm a newbie

My first podcast is up--I can access it through the link apple provided, plus if I search, but not through browsing. When will it show up? How does it get featured?
Also, mine is a video podcast. Not sure whether it's listed as a video podcast. I used feedforall to code the rss. How can I get it to differentiate and tell itunes it's a video podcast vs. an audio one?
Thanks again.

thanks again, Brian. I also just read your reply to my second question, which clarified the link thing. I think, I get it--I'm a newbie so, just want to make sure I totally understand.
So, hypothetically, the xml file (code) can be inside my regular index.com page and the enclosure can be a direct link to the file playing?
IN the future, I'm planning on having a new vodcast every day, five times a week. If I keep the encoded video files in a folder (let's say, called rss), then all the <link> files can just be my url (which is my index.com) page, but each of the <enclosure> links will be a direct link to each of the videos in the rss folder? Is this correct?
Thanks again.

Similar Messages

  • Yet another question about super raid - GS70

    Yes, another question about Super Raid...I recently picked up the cheapest model of the GS70 on newegg which comes with 1 mSata SSD...just a mediocre one if I remember reading correctly.  I'm interested in using MSI's Super Raid once my warranty is over with and have been reading a couple posts here:
    1. Walk through of how to reinstall OS
    --> https://forum-en.msi.com/index.php?topic=167198.msg1224063#msg1224063
    2. I'll need a Super Raid card with links to get some, for about $100 each
    --> https://forum-en.msi.com/index.php?topic=171722.msg1252847#msg1252847
    3. I can't get Super Raid unless it originally came with it?
    --> https://forum-en.msi.com/index.php?topic=171185.msg1249640#msg1249640
    So what's the bottom line? Would I still be able to enable super raid in the future or am I SOL since it didn't come with it originally?
    thanks!

    The GT70 CAN come with an adapter that has 2 (on the older, GT70 0NX models) or 3 (on newer GT70 20X models) sockets for mSATA drives. It's an optional part, that takes place of the primary SATA drive in the notebook, and physically has a different part that connects to the motherboard. If it doesn't come with the SuperRaid adapter, then it just has support for a single 2.5" SATA drive.
    The GS70 on the otherhand, has this built into the motherboard and there is no swapping it out for a normal 2.5" SATA drive. You can only use mSATA drives (on those ports). The GS70 is meant to be an ultrabook, and therefore does not have the same ability as the GT70 to house up to 2 full size 2.5" SATA drives.
    That's really the main difference here. Without physically seeing a GT70 to see how the SuperRaid adapter works, it's slightly difficult to explain.
    But in the end, I wouldn't worry about the SuperRaid....The GS70 should have support for Intel Raid Management Engine, in which case that's all you really need.

  • Yet another question on code optimization

    Hello again
    Sorry for asking too many questions, but I really want to learn how to simplify my work.
    Let's say I have this ArrayList that gets initialized every time a user clicks on a new combobox item and a set of numbers are added to it. I then add this arrayList to another arraylist that is initialized outside of the actionlistener class.
    So basically every time the user clicks the inner arraylist is added to outer arraylist. But I don't want to have duplicate results if the user chooses to go back to the previous JTextAreas and delete the contents to start typing new stuff. The way i am doing this is like this:
    ArrayList<String> filler = new ArrayList<String>(); //The filler that has to be unique, so the user won't screw with the pattern
    filler.add("A*?1qkQOz]4X1QedyhA`H-6$U[I{]0n<RT.W})(J+z7o.<q[g5[y0YA2tv+c@WN");
    //For each JtextArea object add a filler so that no Nullpointerexception happens with the use of arraylist.set()method....
    for (int i = 0; i <textAreaObjs.size(); i ++){
         allValues.add(filler);
    //Replace the unique filler with the actual user input saved in innerList which is of type ArrayList.               
    allValues.set(textCounter,innerList);
    //Remove all the unnecessary fillers
    for (int outerArrayCounter = 0; outerArrayCounter < allValues.size(); outerArrayCounter ++){
         for (int innerArrayCounter = 0; innerArrayCounter < allValues.get(outerArrayCounter).size(); j++){
              if (allValues.get(outerArrayCounter).get(innerArrayCounter).equals("A*?1qkQOz]4X1QedyhA`H-6$U[I{]0n<RT.W})(J+z7o.<q[g5[y0YA2tv+c@WN")){
                   allValues.remove(outerArrayCounter);
                   outerArrayCounter--;
                   break;
    }I tried the different methods of the ArrayList like arraylist.set() and if there is a null at this location: do this, if not do something else but they returned Nullpointerexceptions...
    I tried the isEmpty method too but that only checks to see if the whole list is empty and not specific parts of the array....
    Is there a better, faster, and simpler way of doing this?
    Thanks for the help.

    I thought this might help... an example of a Sorted[Descending]Map of Lists... I didn't tackle the "frequency aspect" I just generated a random "key" for the map... and a random string to stuff in the Word...
    I presume your Word is {String word, int lineNumber, int startIndex} from the source-document... and now you need to query your frequency table for "the most common word" or maybe "the top five words".
    You can fill in the blanks.
    ... and BTW... If I where doing this for real I'd be awfully tempted to extend TreeMap into a "generic" DescendingTreeMap, which I would stick somewhere in my common utils package, from whence it could be reused in future by myself and others.
    If you want the code for krc.utilz.RandomString just ask.
    package forums;
    import java.util.Collections;
    import java.util.Collection;
    import java.util.SortedMap;
    import java.util.TreeMap;
    import java.util.List;
    import java.util.ArrayList;
    import java.util.Map;
    import java.util.Comparator;
    import java.util.Random;
    import krc.utilz.RandomString;
    public class SortedDescendingMap
      private static final RandomString RANDOM_STRING = new RandomString();
      private static final Random RANDOM = new Random();
      private class DescendingIntegerComparator implements Comparator<Integer>
        @Override
        public int compare(Integer a, Integer b) {
          return -1 * a.compareTo(b);
        @Override
        public boolean equals(Object o) {
          return this == o; // yes I do mean reference-equals.
      private class Word
        private final String word;
        public Word() {
          this.word = RANDOM_STRING.nextString(5);
        @Override
        public String toString() {
          return this.word;
      private final SortedMap <Integer,List<Word>> freqTable;
      private SortedDescendingMap() {
        freqTable = new TreeMap<Integer,List<Word>>(new DescendingIntegerComparator());
      private void populate() {
        for (int i=0; i<50; i++) {
          List<Word> list = new ArrayList<Word>();
          for (int j=1; j<=5; j++) {
            list.add(new Word());
          freqTable.put(RANDOM.nextInt(5), list);
      private void print() {
        for ( Map.Entry<Integer,List<Word>> entry : freqTable.entrySet() ) {
          System.out.println(entry.getKey()+": "+entry.getValue());
      public static void main(String[] args) {
        try {
          SortedDescendingMap map = new SortedDescendingMap();
          map.populate();
          map.print();
        } catch (Exception e) {
          e.printStackTrace();
    }This doesn't mean that I like you, and you're still a Putz! ;-)
    Cheers. Keith.

  • Yet another question on formats

    Dear all,
    I've finally finished my first movie and am now trying to export it. However, I do have some format questions which I am struggling with.
    For a little backgroud, the event I need to make a movie on was shot with two different cameras.
    I have 3 sequences which I now need to export in a single one for later use with iDVD...
    I have 2 videos (sequences) with this format: 720x576 25fps DV-PAL (CCIR 601)
    (camera 1) and another one I ripped from a dvd with dvdremaster (camera 2) . I converted the VOBs into a 1024x576 25fps H.264 Square sequence.
    Since both formats are not the same, I did want to use a virgin sequence with a 1024x576 format and put the 720x576 on it with a little transition effect...
    However, I'm unable to create a 1024x576 H.264 sequence in FCE!
    I can use a 576 sequence and then export using customized settings but the image-s height gets compressed...
    What can I do to cut the movie so that the 1024x576 takes the full frame and that the 720x576 only takes what is necessarz?
    Any other suggestions?
    Cheers & Thanks
    Paulo

    Hi and welcome to the forum,
    FCE does not support 1024x576 footage. You should first convert it using something like [MPEG Streamclip|http://www.squared5.com> to a frame-size FCE does support like 1280x720 at a format it supports like Apple Intermediate Codec. You can then combine both clips in a 1280x720 sequence.

  • Yet another question about XServer

    Greetings
    Having installed an XVR100 graphics card in a Sunfire V240 and configured it as the default output device, I have managed to get XSun to start and then start X11VNC, however, while I get a nice, graphical Solaris screen, I dont get any login prompt. Just a mention that this is Solaris X11 v 6.6.2 and some console output showing the last "SU" login.
    Do I need to change the default tty somewhere?
    Additionally, I want to configure some type of desktop manager to work with X but cant find a way to run either KDM (no KDM config in evidence on system) or Gnome.
    Is Xsun what I need to be running on a sparc system or should I run Xorg?
    (Or is Xorg only for Solaris X86)
    Because the original build of this box was without a graphics card, I am having to do this by hand.
    Sorry for all the dumb questions but I've had a much easier time getting X to run on almost any other flavour of UNIX.
    Any help or suggestionswould be much-appreciated.
    Tim

    The GT70 CAN come with an adapter that has 2 (on the older, GT70 0NX models) or 3 (on newer GT70 20X models) sockets for mSATA drives. It's an optional part, that takes place of the primary SATA drive in the notebook, and physically has a different part that connects to the motherboard. If it doesn't come with the SuperRaid adapter, then it just has support for a single 2.5" SATA drive.
    The GS70 on the otherhand, has this built into the motherboard and there is no swapping it out for a normal 2.5" SATA drive. You can only use mSATA drives (on those ports). The GS70 is meant to be an ultrabook, and therefore does not have the same ability as the GT70 to house up to 2 full size 2.5" SATA drives.
    That's really the main difference here. Without physically seeing a GT70 to see how the SuperRaid adapter works, it's slightly difficult to explain.
    But in the end, I wouldn't worry about the SuperRaid....The GS70 should have support for Intel Raid Management Engine, in which case that's all you really need.

  • Yet another question about burners for iDVD 6

    It's not my intention to be redundant and the question about which DVD burners are compatible with the most recent release of iDVD has been asked a few times since iLife '06 was released at MacWorld last week. Yet, though Apple has announced it, why have they not posted a list of compatible devices?
    Or, is the onus on the manufacturers to certify that their burners are compatible with iDVD 6?
    In either case, has anyone determined if this information is available and, if so, where?
    Thanks.

    Or, is the onus on the manufacturers to certify that their burners are compatible with iDVD 6?
    Check with the support sections of the manufacturer's websites - after all, THEY are the ones trying to sell burners.

  • Yet another question about transfer from iPod to PC

    I realize there have been a couple similar questions regarding this, recently, and I have read the answers and the guides within help. The trouble is this: My hard drive on my PC died!! I had to replace it. So, the new hard drive has no music library at all. I need the new library to match what's on the ipod, for further music downloads and automatically updating the ipod, etc.
    I followed directions in "Copy Music to New Computer". At the point where it says to go to My Computer and double click on the iPod (while it's connected, of course) and you're supposed to see a few folders here. One of them should be a folder called iTunes. You're supposed to be able to drag it into your My Music iTunes folder. However, that folder does not appear!! Only Calendars, Contacts, and Notes folders are there. There definitley is music on the ipod. So, why is there no folder there? I can't figure any other way to get this stuff back in my library.
    Please help.
    I could re-import most of it ,I guess, and start over, but if I can't get the stuff that's only on my ipod, the library still won't match. And next time I download new music, and iPod updates itself from my library, I'll lose stuff.
    Any ideas?

    Try this.
    Open iTunes and select edit/preferences/advanced/general. Put a check mark in the box marked "copy files to iTunes music folder when adding to library" and also "keep iTunes music folder organized", then click 'ok'.
    Connect the iPod whilst holding down the shift/ctrl keys to prevent any auto sync, and if you see the dialogue window asking if you want to sync to this itunes library, click 'no'.
    Then go to file/add folder, open 'my computer', select your iPod and click 'ok'.
    The music files should transfer to your iTunes.
    If this doesn't work (and it may not because officially it's not supposed to), there's Yamipod. This is a free program that transfers music and playlists etc from iPod back to the computer. However, it does not transfer playcounts/ratings etc.

  • Yet  another Flash Player Problem for a newbie

    Here is the situation. A friend took my PC and installed a couple of fans and installed AVG. I get the computer back and now when my kids go to web sites that need flash player they get a message that says you don't have flash player (even though I do have it installed). I uninstalled AVG, and adobe flash player and re started the computer. I then tried to re instal the flash player however nothing happens when I click the "agree and install" button.  I have windows XP IE8. After hours of looking through the web I did see a couple of articles that said some CPUs were having trouble with flash player after AVG was installed. Here is one  http://news.softpedia.com/news/AVG-Tags-Adobe-Flash-Player-as-Malware-97976.shtml Anyway considering all i did was have fans and AVG put on, it had to be AVG. What I don't undestand if I uninstalled AVG why am I still having this problem, Any help would be greatly appreciated (and thats a understatement!)

    Hi, I was just getting ready to reply to your post here, when I saw the other one come in. Was going to ask you if you had
    checked your websites to see if using the Removal tool made a difference. Well, that is good news. Glad that took care of it and you didn't have to remove AVG. The rule with Anti-Virus programs is whenever you change from one to another(not updating or upgrading with the same company) that you Download the new one to your Desktop. Then you can remove the old program from Add/Remove, run a removal tool if one is provided and then Install the new Anti-Virus program, and Reboot(always). Reboot after Uninstalling and Reboot after Installing, best policy.
    Thanks for the feedback on your success and kind words and also for marking your thread as answered. Helps everyone.
    eidnolb
    P.S. Should you have any issues in the future, use this thread that you have started. A lot easier since your info is here.

  • Yet another question on daisy chaining...

    After having thoroughly sifted through prior discussion on the subject, as well as looked at the online tutorial (gooberguides) and other sources, I am compelled to come back and ask this question. This is Captivate 5.
    Here is my scenario, and it seems to be quite simple. I have a large project, which I want to break up into smaller ones. This is so that users don't have to sit and wait for it to load from the LMS before they can start. I need to have SCORM reporting, so that users can leave and come back to where they were. I don't think I can resolve this using Multi-SCO Packager, as the resulting package doesn't appear as a single module, but as several modules within a single package. Aggregator wouldn't quite work, since it forces that TOC, which I don't want to have.
    One more wrinkle in the whole thing is that I have my own TOC, which is on the first slide of Module no. 2, to which I have a link from most other (subsequent) modules.
    I have successfully daisy-chained all of this using the online guide mentioned above. I used 'Open URL or file'. At first, I tried pointing to the SWF file for the next module, but when I deployed the final package, my browser (Firefox) wanted to download the next module, instead of playing it back in the browser window. Pointing to HTML file resolved that. My links back to the Module 2 (TOC) work fine. It took me a while to figure out why none of the linking wouldn't work at first. It only started working when I removed spaces from file names (this I couldn't find anywhere in documentation, and stumbled upon by myself).
    My only problem (a deal breaker) is with SCORM tracking. When I publish with reporting turned on, the following happens: first module plays back throughout (all five slides). At the end, it loads the second module. However, when second module starts playing, it either freezes on load, or skips right past first 5 slides and starts playing from slide no. 6. This is telling me that the LMS is treating this as if the user has closed the session after reaching slide 5, then immediately re-opened it, so the LMS is sending him straight to slide 6, except this is now Module 2, and not Module 1. Meanwhile, user has never touched anything and has actually never left the session. Sure enough, if I leave the session at, for example, Module 2, slide 7, when I come back, LMS will be stuck trying to load Module 1, slide 7 (which doesn't exist; my Module 1 has only 5 slides).
    So, apparently, simple daisy-chaining doesn't work well with SCORM reporting. Meanwhile, Aggregator (and Multi-SCO Packager) aren't doing it for me, as they force TOC to show individual modules.
    Does anyone have any ideas how to work around these obstacles?

    Copy the ENTIRE iTunes folder from the old computer to the new computer.
    Open iTunes, everything in iTunes should be exactly as it was on the old computer.
    Connect the device and sync.

  • Yet another question about exporting and video quality

    Kind people,
    I know this question has been asked many, many times, and I have searched and read up of the topic, but I would also like to ask it.
    I shot my video on a Canon Vixia HF10, downloaded it to Final Cut Express to edit, exported it as Quick Time Movie, dropped it in iDVD, then played it on my TV and the quality was…..not good. The video was a little fuzzy and there were ghosts. Are there any settings I should go back and check in iDVD.
    Wolfgang

    Hi(Bonjour)!
    What is the format recorded by this camera?
    How did you capture/ingest your video material in FCE?
    What was your sequence format in timeline?
    How did you export your sequence (specify exact steps, menus and command)?
    What was your iDVD project settings?
    What was the iDVD quality setting?
    Did you monitor your DVD on computer screen or TV set?
    Michel Boissonneault

  • Yet another question on broadband intermittent los...

    I have my Broadband since 2007 and the speed has been a stedy 6-7mb/p upuntil three weeks ago. Mine is with BT unlimitted and not fibroptic. The connection keeps dropping out(Appears to be intermittent)
    Now I find intermittent loss of broadband connection no matter whether it is day or night. It is so frustrating to say the least.
    I observed for three weeks hoping it will resolve with time ( thinking some repairs/upgrades may be undertaken by BT) but with no avail.
    All I know is that BT is to implement fibroptic in my area in Dec 2014.
    My exchange is Trefnant.
    Can anybody help me? Do I need to contact BT?
    Regards

    there could be many reasons please work through this link
    Here is a basic guide to getting help from the community members done by CL Keith Please read through the link posted http://forumhelp.dyndns.info/speed/first_steps.html
    once you have posted the information asked for then the community members can help you more
    if using a hub 4 locate these lines located in the hub logs
    Lines should look like this
    19:11:29, 07 Nov. (2290101.460000) DSL noise margin: 7.00 dB upstream, 6.10 dB downstream
    19:11:29, 07 Nov. (2290101.390000) DSL line rate: 448 Kbps upstream, 288 Kbps downstream
    Thank You
    This is a customer to customer self help forum the only BT presence here are the forum moderators
    If you want to say thanks for a helpful answer,please click on the Ratings star on the left-hand side If the reply answers your question then please mark as ’Mark as Accepted Solution’

  • Yet another question on analytical functions

    Hi,
    A "simple" issue with date overlapping: I need to display a "y" or "n" where a start time/end time overlaps with another row for the same employee.
    For this, I used analytical functions to find out which rows were overlapping. This is what I did:
    create table test (id number, emp_id number, date_worked date, start_time date, end_time date);
    insert into test values (1, 333, to_date('2008-01-01 00:00:00', 'YYYY-MM-DD HH24:MI:SS'),to_date('2008-01-01 08:00:00', 'YYYY-MM-DD HH24:MI:SS'),to_date('2008-01-01 10:00:00', 'YYYY-MM-DD HH24:MI:SS'));
    insert into test values (2, 333, to_date('2008-01-01 00:00:00', 'YYYY-MM-DD HH24:MI:SS'),to_date('2008-01-01 10:00:00', 'YYYY-MM-DD HH24:MI:SS'),to_date('2008-01-01 12:00:00', 'YYYY-MM-DD HH24:MI:SS'));
    insert into test values (3, 444, to_date('2008-01-01 00:00:00', 'YYYY-MM-DD HH24:MI:SS'),to_date('2008-01-01 08:00:00', 'YYYY-MM-DD HH24:MI:SS'),to_date('2008-01-01 09:00:00', 'YYYY-MM-DD HH24:MI:SS'));
    insert into test values (4, 333, to_date('2008-01-01 00:00:00', 'YYYY-MM-DD HH24:MI:SS'),to_date('2008-01-01 11:00:00', 'YYYY-MM-DD HH24:MI:SS'),to_date('2008-01-01 13:00:00', 'YYYY-MM-DD HH24:MI:SS'));
    SQL> select * from test;
            ID     EMP_ID DATE_WORKED         START_TIME          END_TIME
             1        333 01-01-2008 00:00:00 01-01-2008 08:00:00 01-01-2008 10:00:00 
             2        333 01-01-2008 00:00:00 01-01-2008 10:00:00 01-01-2008 12:00:00  --> conflict
             3        444 01-01-2008 00:00:00 01-01-2008 08:00:00 01-01-2008 09:00:00
             4        333 01-01-2008 00:00:00 01-01-2008 11:00:00 01-01-2008 13:00:00  --> conflict Here I see that Employee 333 is scheduled from 10 to 12 am, but it's also scheduled from 11 to 13. This is a conflict.
    To find this conflict, I did this (please correct me if this is incorrect):
    SQL> select id, emp_id, date_worked, start_time, end_time, next_date
      2  from (
      3        select lead( start_time, 1 ) over ( partition by emp_id order by start_time ) next_date,
      4               start_time, end_time, emp_id, date_worked, id
      5        from   test
      6       )
      7  where  next_date < end_time;
            ID     EMP_ID DATE_WORKED         START_TIME          END_TIME            NEXT_DATE
             2        333 01-01-2008 00:00:00 01-01-2008 10:00:00 01-01-2008 12:00:00 01-01-2008 11:00:00So far, so good. Where I'm stuck is, I need to display the conflicts in this way:
            ID     EMP_ID DATE_WORKED         START_TIME          END_TIME            OVERLAPPED
             1        333 01-01-2008 00:00:00 01-01-2008 08:00:00 01-01-2008 10:00:00
             2        333 01-01-2008 00:00:00 01-01-2008 10:00:00 01-01-2008 12:00:00 yes
             3        444 01-01-2008 00:00:00 01-01-2008 08:00:00 01-01-2008 09:00:00
             4        333 01-01-2008 00:00:00 01-01-2008 11:00:00 01-01-2008 13:00:00 yes Is there a way I can achieve this?
    I tried doing a nested query with a count(*) but no success...

    I found an issue. Say we insert this row.
    insert into test values (5, 333, to_date('2008-01-01 00:00:00', 'YYYY-MM-DD HH24:MI:SS'),to_date('2008-01-01 07:00:00', 'YYYY-MM-DD HH24:MI:SS'),to_date('2008-01-01 08:00:00', 'YYYY-MM-DD HH24:MI:SS'));
    SQL> select * from test order by start_time;
            ID     EMP_ID DATE_WORKED         START_TIME          END_TIME
             5        333 01-01-2008 00:00:00 01-01-2008 07:00:00 01-01-2008 08:00:00
             1        333 01-01-2008 00:00:00 01-01-2008 08:00:00 01-01-2008 10:00:00
             3        444 01-01-2008 00:00:00 01-01-2008 08:00:00 01-01-2008 09:00:00
             2        333 01-01-2008 00:00:00 01-01-2008 10:00:00 01-01-2008 12:00:00 --> conflict
             4        333 01-01-2008 00:00:00 01-01-2008 11:00:00 01-01-2008 13:00:00 --> conflictIf I run the SQL suggested by Nicloei, I get:
    SQL> select id,
      2         emp_id,
      3         date_worked,
      4         start_time,
      5         end_time,
      6           Case When end_time > prev_date Or next_date > End_time Then 'Yes' Else 'No' End over_lap
      7      from (
      8            select lead( start_time, 1 ) over ( partition by emp_id order by start_time ) next_date,
      9                   lag( start_time, 1 ) over ( partition by emp_id order by start_time ) prev_date,
    10                   start_time, end_time, emp_id, date_worked, id
    11            from   test
    12           );
            ID     EMP_ID DATE_WORKED         START_TIME          END_TIME            OVER_LAP
             5        333 01-01-2008 00:00:00 01-01-2008 07:00:00 01-01-2008 08:00:00 No
             1        333 01-01-2008 00:00:00 01-01-2008 08:00:00 01-01-2008 10:00:00 Yes
             2        333 01-01-2008 00:00:00 01-01-2008 10:00:00 01-01-2008 12:00:00 Yes
             4        333 01-01-2008 00:00:00 01-01-2008 11:00:00 01-01-2008 13:00:00 Yes
             3        444 01-01-2008 00:00:00 01-01-2008 08:00:00 01-01-2008 09:00:00 NoIt's basically saying that there's an overlap between id 1 and id 2 (8-10 and 10-12), which is incorrect. I ran the inner query by itself:
    SQL> select lead( start_time, 1 ) over ( partition by emp_id order by start_time ) next_date,
      2                   lag( start_time, 1 ) over ( partition by emp_id order by start_time ) prev_date,
      3                   start_time, end_time, emp_id, date_worked, id
      4            from   test;
    NEXT_DATE           PREV_DATE           START_TIME          END_TIME                EMP_ID DATE_WORKED                 ID
    01-01-2008 08:00:00                     01-01-2008 07:00:00 01-01-2008 08:00:00        333 01-01-2008 00:00:00          5
    01-01-2008 10:00:00 01-01-2008 07:00:00 01-01-2008 08:00:00 01-01-2008 10:00:00        333 01-01-2008 00:00:00          1
    01-01-2008 11:00:00 01-01-2008 08:00:00 01-01-2008 10:00:00 01-01-2008 12:00:00        333 01-01-2008 00:00:00          2
                        01-01-2008 10:00:00 01-01-2008 11:00:00 01-01-2008 13:00:00        333 01-01-2008 00:00:00          4
                                            01-01-2008 08:00:00 01-01-2008 09:00:00        444 01-01-2008 00:00:00          3with this data, I can't seem to find a way to conditional test in order to print my overlap column with "yes" or "no" accordingly.
    am I missing something?

  • Yet another question on memory expansion for the G5.This one is really cool

    I currently own a G5 2Ghz (8 DIMM sockets model) that I would like to add memory to. I have done my research (in this forum and elsewhere) and have found that what I need is DDR400 SDRAM (PC3200) memory.
    Now here the 2 questions:
    (1) Must I expand in pairs (i.e. must I for example add 2*512, or can I go with 1*1GB), and
    (2) Are there differences between PC memory and Apple memory modules that disqualify installing PC memory modules (with the same specifications as required, i.e. DDR400 SDRAM (PC3200)) into an Apple? I ask the question b/c PC memory modules are cheaper than their Apple counterparts but both have the same specifications (I compared PC and Apple memory modules on www.crucial.com). I can't shake the idea that differentiating PC and Apple memory modules is only a marketing sham.
    All insight into the matter is welcome.
    Cheers,
    G5   Mac OS X (10.4.3)  

    Some specs (and prices) to print out and tote around the mall
    http://www.crucial.com/eu/store/listparts.asp?Mfr%2BProductline=Apple%2BPowerMac&mfr=Apple&tabid=AM&model=Power+Mac+G5+%28Dual+2.0GHz+DDR%2C+8+DIMMsockets%29&submit=Go
    I have the 2 x 1GB in this March 04 DP2 - no problems - so far.
    As OS X seems to get more picky about RAM with each update, you may wish to consider the importance of a no-quibble guarantee...

  • Yet another question about 24-bits

    I have just combined an Echo Audio Indigo IO with Adobe Audition 1.5 in hopes to have a reasonably good laptop recorder. That need is met quite well.
    There are a number of discussions about bit depth in these forums. The answers become obfuscated by internal conversions done in audio cards, software, and Windows drivers. My current interest is simply how to get 24 bits of unadultered data from a D/A convertor to a data file using Audition. This data will be used to analyze pitch, frequency and intonation and any changes to the data will affect the results.
    Both the Indigo IO and Audition claim 24-bit support and I am convinced that both meet these claims fully. In spite of this there is no evidence that the card, Windows, and the software together will actually meet this claim without a 16-bit conversion along the line. What really matters is whether or not 24-bits of audio can travel from the card to the data file without any changes.
    Question 1: In Audition 1.5 for Windows under "Options/Device Properties/Wave In/Supported Formats" for the Indigo IO the highest density recording listed is 16-bit stereo at a 96K sample rate. What properties do other users find for their 24-bit cards?
    Question 2: The wave programming calls (waveInGetDevCaps) don't include capability definitions for anything beyond 16-bit depth at a 96K sample rate. Where in Windows is there evidence of true support for anything greater than 16-bit Audio?
    Question 3: What software is there that will go directly to the sound card or driver and write 24 unadultered bits to a file?

    I had trouble setting up my 24bit/96k ADAC to record 24-bit in audition. The best way to be sure audition is getting the 24bit samples as 24 bits is to check the status bar when recording. If it says 'Recording as 24 bit' then it's all setup right. If it says 'Recording as 16 bit' then the 32-bit float driver or the 24-bit driver reported an error and audition tried to fall back on the 16 bit version and succeeded. The problem I had was that the driver didn't handle 32-bit floats so it errored out and audition recorded as 16 bits. The only solution was to select the 24-bit option under "Options/Device Properties/Wave In(or out)".
    Just a note. A true 24-bit ADC will send 24 bits to the driver and the driver itself will convert the bits to whatever format it supports. If the driver is instructed to convert to normalized floats the software will simply do something like this:
    SampleOut = SampleIn / 8388608.0;
    This doesn't add any coloration to the audio because a float is really just a 24 bit integer with 8 bits added to tell the FPU where to put the decimal point. Converting down from 24-bits of course degrades quality and converting from 24 bits up to a true 32 bit integer would NOT add any quality to the audio. When stored in a file, 24 bits is 24 bits whether its a float or an integer.
    >Question 2:The wave programming calls (waveInGetDevCaps) don't include capability definitions for anything beyond 16-bit depth at a 96K sample rate. Where in Windows is there evidence of true support for anything greater than 16-bit Audio?
    The website showing waveInGetDevCaps function information doesn't show all the possible format tags or even the sample rates. It is only showing the most compatible forms for drivers. The WAVEFORMAT and WAVEFORMATEX structures used for the drivers are also used in the 'fmt ' chunk of RIFF WAVE files. I've written a lot of software for parallel use with audition using wave files and windows and I can say from experience that when recording 24 bits with audition you're getting the full 24 bits. If your driver truly supports 24 bit samples then audition will allow you to select the 24 bit samples option under "Options/Device Properties/Wave In(or out)" and audition will display 'Recording as 24-bits' when recording. Once recorded Audition no doubt converts ALL bit depths to its internal format which I believe is 32 (or 64) bit float, and if you don't process the file and wish to save as 24 bit integers then the samples saved will be exactly what the ADC sent to the driver.

  • Yet another question about SLP in oes11

    Hi there
    We are in the process of moving all of our servers from oes2 to oes11. Let say that I have
    assumed this network from the old administrator, and Im not pretty sure about the SLP config
    (also Im newbie about netware services, like SLP).
    Few months ago we have a few netware servers and I think that SLP was installed on one
    of these servers. But now, all netware servers are shutdown and we have only Sles and oes2/oes11
    boxes. So I guess that, SLP is not running in our network, but its weird because only two computers
    presented problems to login (classic error "Tree not found"). In our network it seems that we dont have
    problems to login and use ncp services in the workstations. But, in a workstation, if i write slpinfo /A
    I dont see anything except the DEFAULT scope. It think this is bad.
    So, I dont know what happen, exactly. I would like to know how to recheck the slp status
    in my network. I think that the oes11 boxes (we have four) and 2 oes2 boxes are using default
    settings for SLP (use multicast for find slp DAs), so I think that I need a server to act
    as DA and configure multicast on this server? So the rest of the oes11/oes2 boxes can register
    their services on this DA. Right? I think that I dont have any DA in my server networks.
    But, Im confused because if I write
    slptool findsrvs service:service-agent
    on any of my linux servers, I see a lot of servers like (for example)
    service:service-agent://10.10.0.205,65535
    service:service-agent://10.10.0.242,65535
    So, what that means exactly?
    Thank you so much

    So, on a windows 7 workstation typing slpinfo /a you should see: NOTE: The early Win7 Novell Clients cannot perform the slpinfo utility. Make sure you have an updated Novell Client for Win7.
    1) The directory agents (SLPDA) and their IP addresses
    2) The scope list with the name of your scope
    3) Your tree name and IP addresses of the servers holding replicas
    4) A list of servers in your network configured with SLP
    If you are not seeing any of this maybe your tree is being advertised via DNS.
    -Hans
    >>>
    Hi there
    We are in the process of moving all of our servers from oes2 to oes11.
    Let say that I have
    assumed this network from the old administrator, and Im not pretty sure
    about the SLP config
    (also Im newbie about netware services, like SLP).
    Few months ago we have a few netware servers and I think that SLP was
    installed on one
    of these servers. But now, all netware servers are shutdown and we have
    only Sles and oes2/oes11
    boxes. So I guess that, SLP is not running in our network, but its weird
    because only two computers
    presented problems to login (classic error "Tree not found"). In our
    network it seems that we dont have
    problems to login and use ncp services in the workstations. But, in a
    workstation, if i write slpinfo /A
    I dont see anything except the DEFAULT scope. It think this is bad.
    So, I dont know what happen, exactly. I would like to know how to
    recheck the slp status
    in my network. I think that the oes11 boxes (we have four) and 2 oes2
    boxes are using default
    settings for SLP (use multicast for find slp DAs), so I think that I
    need a server to act
    as DA and configure multicast on this server? So the rest of the
    oes11/oes2 boxes can register
    their services on this DA. Right? I think that I dont have any DA in my
    server networks.
    But, Im confused because if I write
    SLPTOOL FINDSRVS SERVICE:SERVICE-AGENT
    on any of my linux servers, I see a lot of servers like (for example)
    service:service-agent://10.10.0.205,65535
    service:service-agent://10.10.0.242,65535
    So, what that means exactly?
    Thank you so much
    antoniogutierrez
    antoniogutierrez's Profile: https://forums.novell.com/member.php?userid=104289
    View this thread: https://forums.novell.com/showthread.php?t=471134

Maybe you are looking for

  • How do I download a DVD from my iMac to my iPad?

    How do I downlad a DVD which plays on my iMac to my iPad?

  • Problems with sql developer and win 8 64 bit

    Hi there, It's my first time in this forum, I am a student programmer and I have many problems to install SQL Developer on Oracle Database 12c. I actually managed to install both, but I could not make them work. My question is SQL Developer works on

  • Sharing documents in iCloud

    I have a business iCloud account so that I can work on documents at home. My boss has the documents in iBooks but when I go to my ibooks they are not there.  We both have our documents and data turned on.  Any input would be great.

  • Google like search

    Hi, i'm trying to do a google like search in a J2EE application using Oracle 8.1.7 with Intermedia Text. Thus, I want to query database and return a set with first the 'AND results' and then the 'OR result'. The result set must be distinct. I came up

  • Chosing processors for Oracle database 10g 64 bits

    Hi, I have a customer that is planning to buy Oracle 10g 64 bits on a server Windows 2003. My customer is interested in a processor that handles a lot of data in and out in a very effective way and the processor should be able to perform a great numb