Yet another strange issue with Mailbox

Hi everybody,
I updated my MacBook Pro to Mavericks 10.9.1 a week ago, and a very annoying and scary issue appeared on my computer (I had been using 10.9.0 before, and hadn't been facing any issues).
After the initial update, my Inboxes (I use Gmail) have become completely blank, empty, while in the web interface they appear absolutely ok (hundreds of mails there). It's also all good on my iPhone.
All the new mails I receive are being shown in the Inboxes, but not the ones that were there before the update.
Moreover, some folders also appear empty (you can take a look here http://d.pr/i/CDjn) while they have hundreds of mails inside.
What should I do?
Thanks a lot for your kind help!

Okay, so I removed it and set it up again, but it went back very quickly and everything is the same - seems like the mail info "sits" somewhere on the hard drive, so it's not being set up again from the very scratch.
How to set it up from scratch?

Similar Messages

Yet another export issue with Aperture 3

Judging by a search of topics, there seem to be a myriad of problems associated with getting files out of Aperture, some of which represent occult setting issues, others which seem to be actual bugs. I've run into an issue which seems to defy categorization, and I'm not sure if it's me doing something wrong, or if it is actually yet another bug with this software. I've been an Aperture user since 1.0 and I have to say the current version I'm running (3.4.3) is by far the worst yet. Anyway, enough whining. Here are the issues:
I'm running Aperture on a 6 core Mac Pro with Lion 10.7.5. There are two thing happening.
1. Exporting JPEGs is INCREDIBLY slow - perhaps as long as 4 or 5 minutes for a 3MB file.
2. This is the one driving me batty right now. Tried exporting a batch of images as JPEGs at the 50% original size setting. The master files are large 16 bit TIFF images from Nikon D800 RAW files, post-processed in Nik HDR Efex Pro 2. They are 80-100MB in size. When I export the images to a file on my Desktop, it consistently exports 6- 10 KB thumbnails. I've checked and rechecked my export settings and can find nothing amiss there. Has anyone else had a similar experience? Could the view I'm working in have anything to do with this? I work 95% of the time in split view.
Thanks,
Russ

I agree that there re a lot of posts about exporting, but a very large number of them refer to the same thing, and it's not a bug, but rather a misunderstanding.
For instance:
Tried exporting a batch of images as JPEGs at the 50% original size setting.
Okay.
The master files are large 16 bit TIFF images from Nikon D800 RAW files, post-processed in Nik HDR Efex Pro 2
Not relevant.
They are 80-100MB in size.
Not relevant either.
Why?
Because size refers to the dimensions of the image. So a 1,000 x 1,000 pixel image exported at 50% will turn out as 500 x 500 pixels.
Were you expecting a jpeg between 40 and 50 MB? That's Jpeg quality or the amount of compression applied to the image. And as you're compressing a lossless format (tiff) to a lossy one, and one with an aggressive compression algorithm, he resulting Jpeg, even at high quality, will be much, much smaller, more likely in the 6 - 8 MB range.
That's the nature - and indeed the point - of Jpegs.
So, if you're getting 6 - 10 kb images, you're exporting at a very low Jepg Quality.
This may also explain why it's taking so long to export. Getting rid on 99.99% of the data and compressing into 10kb is always going to take time.

Yet Another Popping Issue with Xtremegamer Fatal1ty

When I start or stop a song/sound, 90% of the time, I either get a popping sound or something that sounds like it's playing a fraction of a second worth of a song at a higher volume than the songs are playing at. Maybe it's just some sort of interference rather than that fraction of a song, who knows. Sometimes there's a pop or crackle somewhere in a song but it might just be the track.
I don't know what the hell to do. I've tried everything: reseating the card in both of my free PCI slots, reinstalling drivers, updating BIOS. I know it's getting a little old hearing people bash Creative all the time but these guys really need to get their act together. I can't believe they would let this crap fly.
Message Edited by genzeleam on 0-29-2008 0:56 AM

Any suggestions?

Yet another MacBook Pro with display issues (NVdia chip)

Exactly one year and 1 week after purchase, my video controller started freaking out. So just 1 week out of warranty, my display started flickering, blinking, showing garbled clumps of pixels and got progressively worse over the last week until, now, it locks up and/or reboots after about 15 minutes of uptime.
I have:
- installed all updates, including firmware
- reset PRAM
- re-seated RAM
- replaced RAM
- used SMC FanControl to try and keep the GPU cool
- parked the MacBook in front of the fan/air conditioner in an attempt to keep the GPU cool
- ran the Hardware Test, which returned a faulty video controller
None of the above have had any positive effect whatsover.
I've dug through these forums and hunted around the rest of the net for more info. Every symptom points to the NVidia GeForce issue. It seemed to be heat related. Maybe it was at first (even though max temps were never over 180 F), but after just one more day it doesn't seem to matter anymore. The machine is just FUBAR.
Tomorrow, I'm taking it in to the Apple store for service. Everything I've read here tells me it'll be at $1,000 logic board replacement since I'm a week out of warranty. Needless to say, if I come home tomorrow with a $1,000 receipt AND no laptop I'm going to be pretty upset.
What really concerns me is that, if I have to get the logic board replaced, they'll just put in yet another faulty board with another NVdia chip that will do the same thing all over again. There has to be another option, short of just getting a new iMac or tower with an ATI card instead. What else can I do?

bikemonkey wrote:
I think my GPU is borked too.
http://noizesurge.com/downloads/gpu1.jpg
http://noizesurge.com/downloads/gpu2.jpg - incidentally my computer had completely frozen at this point.
I'm pretty sure from observing these types of glitches that this is a hardware fault. I shall ring Apple on Monday and hopefully they can pick it up and sort it all out! Does anyone know roughly how long a turnaround is in the UK?
Yes, your video controller is toast. That's exactly how mine looked.
Just to make certain, run the Hardware Test:
- Put in DVD 1 that came with your MacBook Pro.
- Shut down
- Restart, holding the D key
- You'll be put into test mode, run the default test (no need to run the robust test at this stage)
I'm betting it will return a message that looks like: "4VDC/1/40000003: videocontroller"
If so, your logic board will have to be replaced.
The Apple Store I went to (Michigan Ave, Chicago) told me it would take 5-7 days. I'm not sure what UK times would be like, but I'd expect a little longer.
bikemonkey wrote:
Incidentally, people are saying that they've have logic boards and what not replaced only for the problem to reoccur. Does this mean nVidia haven't properly fixed the issue?
Correct. Nvidia hasn't done a thing about this (that I'm aware of), and Apple seems to be putting the same logic boards with the faulty Nvidia chips back in.
Until we see a new/refreshed line of MacBook Pro's, I think we're stuck.

Yet another major gripe with APE - restricting connection to home network

Yet another serious issue I have with APE is the fact that since very often, the computer just can't see the base station (even when it is located 30 inches from it...) it will just automatically connect to the next available open wifi network, which happens to be my neighbor's... that way I often finding myself surfing someone's else's unsecured network and it's ******* me off.
I tried to delete all wireless networks from system preferences/network/Airport but this does not makes a difference. Any idea on how to restrict my computer to the APE or at least have Mac OS warn me every time before it connects to an unsecured wireless network?
Thanks.

Somewhat easy: I'm assuming you're using Leopard, mainly because I ran through the options from leopard. Other versions of OS X may have slightly different placement or names...
Click on the airport icon in the menu bar.
Choose "Open Network Preferences"
Select "Airport"
There's a checkbox labeled "Ask to join new networks" Make sure it is enabled.
Select "advanced..." (it's a button, lower right)
You can change the connection order by dragging your network to the top of the list.
You can also click on a connection you don't want, then click on the '-' button below it to remove that connection. (and at least the first time, the computer will ask you if you want to connect)
You can go a step futher, by de-selecting the checkbox labeled "Remember any network this computer has joined" That way it won't add anything to your list of 'remembered' networks.
Message was edited by: pariah0

Strange issue with speaker - stays on after a call has ended

Hi all,
I have the latest iOS version (7.1) on my iPhone 5.
I haven't had any hardware issues before, but 2 days ago something strange has began happening.
Strange issue with speaker - it stays on after a call has ended and plays the sounds that it gets from the microphone.
Only way to stop it is to make another call and hang up.
Any ideas?

oops...we're in the same boat....look m8 that ios 7.1 is rubish i recently after updating mine the ear stop working i called apple customer care we went throu wiv that adviser we restore the phone up 2...3 times nofin happen then da guy told me finally it was not a software problem....but hardware problem and they booked me up 2 take it 2 the near apple store because it is only from apple u can get da matter fixed however if your phone where unlocked outside your network provider or again from the coner street tech....? 4get cos once those form street unlock your phone you just have the same cover or boby let say it ....but your IMEI and all manufacture detail will changed........the good news is if your phone still have manufacture waranty iz free from apple if your waranty run out? apple will ask you 2 pay up 290£.....
hope this replay may hel you m8
stay bless

Strange issue with Exchange system

Hello,
I'm experiencing a strange issue with one of the Exchange 2013 mailbox servers running on Windows 2012. When trying to upgrade it to the new CU5, I'm getting the following errors:
Error:
The local domain needs to be prepared using Setup /PrepareDomain before server roles can be installed.
For more information, visit: http://technet.microsoft.com/library(EXCHG.150)/ms.exch.setupreadiness.DomainPrepRequired.aspx
Error:
The Mailbox server role isn't installed on this computer.
For more information, visit: http://technet.microsoft.com/library(EXCHG.150)/ms.exch.setupreadiness.UnifiedMessagingRoleNotInstalled.aspx
Error:
The Mailbox server role isn't installed on this computer.
For more information, visit: http://technet.microsoft.com/library(EXCHG.150)/ms.exch.setupreadiness.BridgeheadRoleNotInstalled.aspx
Error:
An unsupported operating system was detected. Exchange Server 2013 Client Access, Mailbox, and Edge Transport server roles support Windows Server 2008 R2 SP1 or later and Windows Server 2012.
For more information, visit: http://technet.microsoft.com/library(EXCHG.150)/ms.exch.setupreadiness.ValidOSVersion.aspx
In the Exchange organization there are 2 CAS servers, 2 MBX servers.
Memento Mori

Hi Vick,
Based on my research, I suggest you should upgrade the AD first.
1. Exchange 2013 CU5 contains schema changes. To upgrade the Schema to CU5 you can execute the following command:
Setup.exe /PrepareSchema /IAcceptExchangeServerLicenseTerms
2. And you also should upgrade the
Configuration Partition and the Domain Partition with the following command:
Setup.exe /PrepareAD /IAcceptExchangeServerLicenseTerms
Setup.exe /PrepareDomain /IAcceptExchangeServerLicenseTerms
3. After finished above two steps, now you can start to upgrade an Exchange 2013 server to CU5. Open a command prompt and enter the following command:
Setup.exe /Mode:Upgrade /IAcceptExchangeServerLicenseTerms

Strange issue with WEBI schedule Report

Hi All,
I have a strange issue with schedule WEBI reports, a schedule report runs for Hours , i reschedule it again by deleting the instance and the schedule report never got succeed even after running for hours.
Any idea???
regards

Hi Manoj,
1. Try to put some filters in the report and then run the report. if it takes less time, then probably your query is fetching very large data.
2. MDX query error may be the reason , this error come when a query runs endless, please try running the query 2-3 times, or when load on server is less.
Hope this will help,
Anamika.

Strange issue with RAM upgrade: It works but it doesn't! Please help.

Hello Everyone,
I have a very strange issue with my iMac since upgrading my RAM from 4 to 12 gig. When I first installed the new RAM it booted up and ran great. The next time I went to boot the iMac up it swtiched on but didn't get as far as the first white boot up screen. I tried turning it off and on a few times using the power on/off button but still no success. I decided to remove the RAM and reseat it. The computer then booted up again fine. Here's the problem though: when I went to switch my iMac on the next day it wouldn't boot up. Again, I took the RAM out and put it back in and the iMac booted up fine. I've checked the status of the RAM in the system profiler and it reports that everything is OK. So, I'm at a loss. Obviously, I don't want to go through this process every time I want to start up my Mac. Any ideas/solutions would be very gratefully received.
Many thanks in advance.

I completely agree with you. It will be one of the 3 issues you outline. The machine was bought brand new and has never given me a problem. It is just the introduction of the new RAM that has started a problem. However, I did just risk a restart and it booted up fine. I don't know if a restart is any different to shutting down and then pressing the on/off button to start the computer. Maybe my last reseating has done the trick or maybe my thinking is flawed because restarting involves a different process to booting up by pressing the on/off button. I don't know.
In the part of the world I'm sitting in it's night time now so I will leave the diagnostics running and check the results in the morning. I hope the issue is now resolved anyway. This sort of thing takes me back to my dark PC days although in this case I know it's probably not the Mac's fault.
Thanks again. Very much appreciated.

Strange issue with rights of account, used by SSIS (Foreach Loop Container does not return file names without Admin rights on server)

Hello everyone.
Faced very strange issue with account, which is used to run SSIS package.
The specific package uses Foreach Loop Container to retrieve file names within the specified folder, and put them into Import file task.
The package is set up to run under specific service account. This service account is given all permissions (Full control) to the folder where source files reside.
So the issue is: SSIS package fails to execute this task (Foreach Loop Container and then Import), and shows that no files are found in the directory (although files ARE there).
Once we're adding the service account into local Administrators group on the SQL Server, it works! Removing - does not work again. We cannot leave the service account as SQL server's admin as it's prohibited by our IT policies, and is just a bad practice.
Any ideas, please?
MCP

Here's the real log output:
Date 16.04.2014 12:47:09
Log Job History (RU-BW: Update)
Step ID 1
Server Server
Job Name RU-BW: Update
Step Name bw_import_cust_master_data
Duration 00:00:02
Sql Severity 0
Sql Message ID 0
Operator Emailed
Operator Net sent
Operator Paged
Retries Attempted 0
Message
Executed as user: service_account Microsoft (R) SQL Server Execute Package Utility Version 10.50.4286.0 for 64-bit Copyright (C) Microsoft Corporation 2010. All rights reserved. Started: 12:47:09 Error: 2014-04-16 12:47:11.45
Code: 0xC0202070 Source: bw_import_cust_master_data Connection manager "Input" Description: The file name property is not valid. The file name is a device or contains invalid characters. End Error Error:
2014-04-16 12:47:11.47 Code: 0xC0202070 Source: bw_import_cust_master_data Connection manager "Input" Description: The file name property is not valid. The file name is a device or contains invalid characters. End
Error Error: 2014-04-16 12:47:11.48 Code: 0xC0202070 Source: bw_import_cust_master_data Connection manager "Input" Description: The file name property is not valid. The file name is a device or contains invalid
characters. End Error Error: 2014-04-16 12:47:11.48 Code: 0xC020207E Source: Import file Flat File Source [1] Description: The file name is not valid. The file name is a device or contains invalid characters.
End Error Error: 2014-04-16 12:47:11.48 Code: 0xC004701A Source: Import file SSIS.Pipeline Description: component "Flat File Source" (1) failed the pre-execute phase and returned error code 0xC020207E.
End Error DTExec: The package execution returned DTSER_FAILURE (1). Started: 12:47:09 Finished: 12:47:11 Elapsed: 2.324 seconds. The package execution failed. The step failed.
MCP

Strange issue with external monitor, only working when external speakers plugged in (using Thunderbolt to VGA adaptor)

Hey – I am having a very strange issue with my external monitor; where it only works if my external speakers are plugged in and connected.
I am using a late 2011 Macbook pro, running Mavericks 10.9.4, along with an MBox 2 (USB Audio Interface), and two powered speakers (KRK Rokit 5). This setup has had no issues. I have just acquired an external monitor (Benq T2200HD), which I am using with a thunderbolt to VGA adaptor (a cheap Chinese knockoff adaptor).
To start - I plugged the monitor in with the thunderbolt adaptor, and it powers up and works fine. However, there is a nasty buzz coming from the speakers. I did some research and it looks like a simple ground loop issue. I did a bit of troubleshooting, and this is where things get weird.
What I found is - If I unplug the MBox, the monitor loses signal from the computer (displaying ‘No Signal Detected!’). Further, if I keep the MBox plugged in, however unplug both the cables from the MBox to the speakers, the monitor loses signal. It doesn’t matter if the speakers are turned off, however they need to be plugged in (or the monitor loses signal). Weirder still, I can unplug the MBox, however the monitor will work if I plug in the speakers through my macs headphone jack.
Simply put, the monitor only works if there is a direct connection between the computer, the speakers, and the power source. What is going on here? Is the monitor grounding through the computer port, to the speakers (I don’t know how this works, is this possible?). Could it somehow be the cheap VGA adaptor I am using?
Some other information:
- Everything is plugged into the same multi-box for power. I have tried plugging things into separate sources, and the result is the same.
- If I unplug the thunderbolt adaptor, then the speaker noise disappears straight away.
- The ground noise doesn’t appear in my headphones, which are plugged into the MBox.
Any information would be great – am I missing something here, or is this genuinely weird?

Well, I went back into Best Buy to test on 3 other laptops (2 Asus, and their floor model for this Sony). It seems to be doing the same problem so at least I was able to rule out broken hardware issue on my particular laptop.
Here's what I did to test:
Since I couldn't really install Adobe Premiere on their machines, I used the DVIO software (http://www.carr-engineering.com/dvio.htm) and a 5 min clip I captured. I transferred onto their machines, hooked up my Sony D8, and attempted to play the video. It would play for 15 seconds and then stop and jitter with a loud noise (like it does on my laptop). I even tried changing each machine's firewire driver to the legacy one and same results. I pulled a brand new 4 pin to 4 pin firewire cable off their shelf and still the same problem.
I think I've nailed it down to Win7x64 bit Home Edition not playing nice with Firewire driver. Very annoying. I can't find any concrete evidence of this from other users on any of the forums that have my particular problem, but from my own testing, it's all I can conclude.
I have 2 other things I can try:
1. Opening the laptop and looking at the firewire to maybe find appropriate driver (ugh, I don't want to have to open this thing up).
2. Upgrading to Win7x64bit Pro and possibly testing with XP on the new MS Virtual PC (http://www.microsoft.com/windows/virtual-pc/). I can't do it with my Home edition apparantly.
Who needs to view video on an external TV anyways....sheeesh...(scarcasm).
Tim

I am having strange issue with my apple tv...i set up pictures to scroll through to the tv using home sharing. Now album covers are interspersed with my pictures. I have been using apple tv for a while and never had this happen before

I am having strange issue with my apple tv...i set up pictures to scroll through to the tv using home sharing. Now album covers are interspersed with my pictures. I have been using apple tv for a while and never had this happen before

Are you watching this content though iCloud or though from iTunes on your local computer? If it is from iCloud have you tried downloading the content to iTunes and watching it on ATV from that source to see if it still happens? This is geerally a much more reliable way to view the content. Easer to fast forward and rewind too.
- I have a stable internet connection
Clearlly you don't
>(Ive tested on other devices)
Which does not tell you anything about the specific connnection from ATV to iCloud.
>I am able to stream Netflix problem free from my AppleTV without so much as a hicup
Again which does not tell you anything about the specific connnection from ATV to iCloud.
>- I am able to download the episodes to my phone, ipad, and computer without any issues
Again which does not tell you anything about the specific connnection from ATV to iCloud. It does remove your ISP throattly traffice as a possible cause though. So that is good.
Have you checked your wireless rounter? Tried doing the factory restor on it? Upgrading it's firmware? Is it and or ATV getting extreamly hot when this problme happens?

Strange issue with external monitor, only working when external speakers plugged in

Hey – I am having a very strange issue with my external monitor; where it only works if my external speakers are plugged in and connected.
I am using a late 2011 Macbook pro, running Mavericks 10.9.4, along with an MBox 2 (USB Audio Interface), and two powered speakers (KRK Rokit 5). This setup has had no issues. I have just acquired an external monitor (Benq T2200HD), which I am using with a thunderbolt to VGA adaptor (a cheap non-apple adaptor).
To start - I plugged the monitor in with the thunderbolt adaptor, and it powers up and works fine. However, there is a nasty buzz coming from the speakers. I did some research and it looks like a simple ground loop issue. I did a bit of troubleshooting, and this is where things get weird.
What I found is - If I unplug the MBox, the monitor loses signal from the computer (displaying ‘No Signal Detected!’). Further, if I keep the MBox plugged in, however unplug both the cables from the MBox to the speakers, the monitor loses signal. It doesn’t matter if the speakers are turned off, however they need to be plugged in (or the monitor loses signal). Weirder still, I can unplug the MBox, however the monitor will work if I plug in the speakers through my macs headphone jack.
Simply put, the monitor only works if there is a direct connection between the computer, the speakers, and the power source. What is going on here? Is the monitor grounding through the computer port, to the speakers (I don’t know how this works, is this possible?). Could it somehow be the cheap VGA adaptor I am using?
Some other information:
- Everything is plugged into the same multi-box for power. I have tried plugging things into separate sources, and the result is the same.
- If I unplug the thunderbolt adaptor, then the speaker noise disappears straight away.
- The ground noise doesn’t appear in my headphones, which are plugged into the MBox.
Any information would be great – am I missing something here, or is this genuinely weird?

Hello cgoldberg11
Please go to the below link to test if you are having a speaker hardware failure.
Testing for Hardware Failures (Windows 7)
This will rule out hardware failure, let me know how that goes.
Thanks
If I have solved your issue, please feel free to provide kudos and make sure you mark this thread as solution provided!
Although I work for HP, my posts and replies are my own opinion and not those of HP. .....
Reguards,
Mo

Strange issue with Spry Accordion Panels

Hi, I'm having some strange issues with the Spry Accordion
Panels.
Here is the page:
http://www.bellaclientcenter.com/browncollege/aboutus.html
For some reason when I preview this message it adds extra
characters to the url above, so just delete those off to see the
correct url.
The only browser this does NOT happen in is safari, I'm
seeing it all of my other browsers. You'll notice when you first
load up the page, you'll see that the active panel header
background is green, and the non active is a dark grey. But when
you click one of the other panels they all turn a strange neon blue
color. This is very apparent in firefox.
Any thoughts on this? I've attached the spry css code in case
the problem is there.
thanks so much!!
Jeff

That is because your page is currently invalid. And renders in IE quirksmode..
<base href="http://www.industrialwebsearch.com/">
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Strict//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-strict.dtd">
So make sure your page is valid, and the animations will go smooth in ie

Strange issue with the render percentage indicator

Hello,
I'm getting a strange issue with the FCPX interface - the little gauge that shows the percentage complete a render is - seems to have gone crazy! and is spinning round. I've tried changing project/ restarting fcpx and also restarting the mac!
heres a screen capture of it in action... https://www.dropbox.com/s/o9bwexyuntx0jxd/what.mov

This is traced back to a backup issue.. Hopefully a fix will come with 10.1.4
At this time, the solution is to turn off backup per library...
10.1.3 update "backup" mess

Yet another strange issue with Mailbox

Similar Messages

Maybe you are looking for