Yet another transition query

Hi folks
I have an older version of premiere elements which came with some additional transitions which I would like to use in premiere elements 8.  I've tried simply loading them into the folder where the other transitions are in the hope that elements would recognise them but no luck.   Anybody know if it can be done and if so how?
Thanks
Richard

Richard,
A lot will depend on what these extra Transitions are, and how they are installed. Some are just copied over, while other have an installation routine that writes other necessary files. Also, be aware that some older Transitions just might not work in PrE 8. This happens a lot with 3rd party content. Many plug-ins for earlier versions of PrPro will just not work in PrPro CS4.2. In earlier versions of PrPro, one could use the Hollywood FX Transitions, by just changing the file extensions. This no longer worked with CS4, and one had to buy new Hollywood FX Transitions for that version. Could be the same in PrE 8, but I do not know for sure.
Which Transitions are these, New Blue, or other?
You might want to go to the software company's Web site, and see if there are any notes on PrE 8. Also, check your installation disc for that earlier version, and see if there was an installation routine, or if they just copied over to the proper folder. Should be a Read_Me, or similar, as these are included with many 3rd party "Goodies."
Good luck,
Hunt

Similar Messages

  • Yet another wifi query for the 5800

    Having trawled the net and tried almost every fix, can anyone point me in the right direction?
    5800, & BT voyager2100.
    It's paired, the wifi symbol shows up when I try to connect, but STILL I get the dreaded "web:no gateway" message after about 15 seconds. But I know it's connected because the config panel on the PC shows the phone IP under 'connected devices', which I presume it wouldn't do if MAC filtering was on.
    BTW I've manually altered the default gateway/DNS/subnetmask/etc settings under the 'IPv4' panel as suggested elsewhere on here, but still no joy....
    Where do I go now? In fact, IS there a fix?
    Thanks

    This may be a dumb question, but have you set your PC to allow internet sharing via BT? If you can connect to your PC via BT but not get to the internet your PC is blocking access.
    If I have helped you with your problem in some way, please take a little time and hit the kudos button in my post. Without your feedback, I don't know if I am being helpful or should just be put out to pasture.

  • After having yet another problem with my MacBook Pro and having to wipe the drive, I am now unable to sync my iPhones etc without erasing all the music on them. Is there a way around this? I have no other library!

    After having yet another problem with my MacBook Pro and having to wipe the drive, I am now unable to sync my iPhones etc without erasing all the music on them. Is there a way around this? I have no other library!
    iTunes is a mess! It couldn't find it's own libraries and I was forced to create a new one. Now I don't know where my music is or if any's missing.

    columbus new boy wrote:
    How crap is that?
    It's not crap at all.
    It's not that simple. For example, I've 3500 songs on my MacBook but don't want them all on my phone, so I have to manually select each song again???
    There has to be a solution.
    Why not simply make a playlist with the songs you want on the iPhone?
    and maintain a current backup of your computer.

  • Is this yet another problem with 7.5 or is it just me . . .

    Upgrade seemed to be fine, at first . . . now I keep getting distortion on songs. It seems to be quite random and just because a song has been distorted when I've listened to it once doesn't mean it will be when I listen to it again! It's driving me insane. Is this yet another bug or have I done something wrong (apart from upgrading to 7.5).

    Hi Emlou,
    If you have a Windows based operating system such as XP -
    It seems to me that you are suffering what I am having the same problem with - the program takes up to much of your computer's processing usage. If you go into your task manager and watch performance as ITunes runs - you will see how much of the total computer usage it is taking at any given moment - that's why your songs are distorted, slowing, garbled, etc - the usage on mine spikes from 11% - 93% AT ANY GIVEN MINUTE! I have no idea why, but I have found that by going to your "Control Panel" and clicking on Quicktime you can adjust audio output to help. Click the audio tab, click Safe Mode Wavout only (checkbox) / Then adjust the "Rate" to 96kHz / Then adjust the "Size" to 16 bit. Close that and shut down and restart Itunes - it might help a little for you.
    Maybe someone out there can help us find out why we are suffering with all the CPU usage trouble and how to adjust that spiking.
    Thanks!
    Paul

  • Yet another No Service iPhone 4, second hand

    Hi all,
    Apologies for yet another topic about the No Service issue on the iPhone 4. I bought a secondhand iPhone 4 16GB 2 days ago after having a 3GS 32GB for 18 months with no problems. iPhone 4 was just over a week old when I bought it (warranty date shows when it was first activated), on the O2 UK network like my old one.
    All was fine for 2 days, was receiving and making calls and texts etc with no problems. But since late afternoon yesterday the phone has mostly said No Service. It occasionally goes onto O2-UK but with no bars of signal so calls and texts still fail immediately.
    I've tried all of the tips I can find online to resolve this, airplane mode on/off, reset network settings, restore from backup, restore as new phone, hard resets. But nothing's working.
    I can take out my SIM and put it into my 3GS, in the same location, and get 5 bars of signal, all my texts come through. Then put SIM back into iPhone 4 and straight away, No Service.
    I've made a Genius bar appointment for tomorrow afternoon, but I'm wondering what happens regarding the fact that I'm not the person who bought the phone in the first place? Will this be an issue?
    Thank you in advance for any advice about this, was so looking forward to having this phone and now, bleh!

    I spoke to o2, they checked my SIM is activated and said they don't need a record of my IMEI number. Still saying No Service so will have to see what the "Genius" says tomorrow!

  • Yet another Mac Book Pro (A1211/2.33 GHz) freeze problem

    Hi everyone,
    I have yet another freeze mystery, if people fancy having a crack at it.
    I had this notebook for about 4 and a half years and it served me well until 2 months ago. It is a 15' MBP from December 2008 (A1211) with a 2.33GHz Core 2 Duo and 2GB of RAM.
    Now I constantly get lags or freezes while I am using it.It manifests itself via the beachball and a frozen screen. First, I thought it was the hard drive but I replaced it with a tested new one and I still get the same behaviour. The reason I thought it was the HD is that it seems to freeze often when there was a lot of access to HD or memory. For example, firefox would cause a freeze quite often when it was trying to access the cache or history. I get the same behaviour when trying indexing my music for the genius feature. Often when I close applications, it will halt the system for about 2 minutes.
    I think the number of lags also correlates with temperature. I am pretty sure that the notebook's heat diffusion properties has deteriorated strongly over the past year as it seems to be using the fans a lot more extensively. The heatsink seems to get really hot these days as well. So my next step would be checking the thermal paste on the heat sink. Before I am going to do that, I want to consider any remaining options as dismantling the laptop up to the heatsink is a bit of a pain.
    My gut feeling would be that it has to do either with the memory or maybe some 'bridge' that transfers the data between HD, GPU, CPU and memory. I am aware that bridge is the wrong word and I am simplifying the architecture of the mainboard too much, but I am sure you get what I mean. The data rate between some of those is inhibited.
    The reason why I am saying some is that often the system seems overwhelmed by the amount of commands, just sits there and then resumes executing all of them as it had taken a break. This can be easily seen when streaming video in a web browser. I often get the beach ball and my whole screen freezes, but the movie, or at least the sound, keeps running in the background. After a while it usually resumes and shows the movie at the current playing position. Sometimes it doesn't recover, not even after 30 minutes and I have to switch it off.
    I hope I provided enough information for you guys to have a think about this.
    Any help in this matter would be gratefully appreciated.

    Before re-installing the operating system, which might also work, I found this article helpful:
    http://macs.about.com/od/usingyourmac/qt/Fix-Spod-How-To-Fix-A-Spinning-Pinwheel -Of-Death.htm
    I've followed the directions since they seem to make sense and am waiting for the next Pinwheel of Death. They seem to be saying the same thing you are Chris, but ascribe the problem to 'permissions' which are fixable (gasp) via the OS disc utility.

  • HT204368 After I updated my iphone 4 to ios 6.1.3 I can no longer connect to my bluetooth plantronics model M25.  I tried reset all settings after turning on and off also submitted diagnostic.  Do I have to buy yet another bluetooth set?

    After I updated my iphone 4 to ios 6.1.3 I can no longer connect to my bluetooth, plantronics model M25.  I tried reset all settings after turning on and off also submitted diagnostic.  Do I have to buy yet another bluetooth set?

    Thank you wjsten for your soon reply. Unfortunately on these days I'm in a country that Apple don't have any retail store here and for sake of time I prefer to fix it myself to DHL it to the nearest country to use its warranty. Do you have any idea how can I fix it? Do you think it's a software issue?

  • Yet another grey folder thread, help!

    Sorry for yet another grey folder thread, but here goes:
    Today, earlier, installed Firefox update, along with some addon updates for that program. Quit Firefox and attempt to relaunch, relaunch fails. Reset computer, thinking that will do the trick, I now have grey folder with question mark.
    Resolve attempts: reset pram = fail; apple care cd = will not launch/fail; disk utility from original install disks = fail; cannot get repair of disk or permissions to work, continually get error about "failing on exit"; safe mode launch = fail
    So, I've done everything, and I've come to conclusion that I am f***, and my HDD is fried (but I hope I am wrong).
    So, dear gurus, my question(s)
    A) Is my HDD salvageable at all? is there some trick to getting the AppleCare cd to work? Anything?!?!
    if not, then B) How can I recover my documents/music/pictures? Long story short, there are several things on there that never had a chance to make my back up schedule, and I desperately want to keep them. Any way to make/copy a disk image to save the docs/imgs, or Firewire them to an external hdd? Do I need to consider a professional HDD rescue?

    Looks like a mechanical failure, and Apple won't cover the replacement due to a drop it sustained a year or two ago (the power cable was in, and it fell on the connection point, denting that in, Apple states there is a critical board their and that it would be $950 Tier 3 repair which I can't afford). So I'm going to try a Firewire Migration and a few other things and see if that works. If not, oh well. Thanks everyone for the ideas!

  • Double up of my document folder If I click on my Documents in finder it then opens another selection of folders including yet another documents folder which if this one is clicked on the folder is repeated yet again this does not appear to be correct help

    I believe I have  a problem when opening up my documents in finder. where upon I can view all my folders but with yet another Documents folder within this group, if I then click on this second Documents folder yet again a repeat  of the do'cs  folder appears. I have tried to merge the Documents folders into one but after a morning and a few hours later having completed the merge when I reopened the folders the problem was still there. Help.
    Sandra

    Reset the PRAM
    Reinstall the operating system from the dvd (you will not loose your data)

  • How to Copy RPT of one BEX query to another Bex Query

    Hi,
    I have a Crystal Report-A1 based on one Bex Query ZABC_1. I also have another Bex Query with same output and source named ZABC_2.
    Now i want the to copy A1 to A2 and have A2 referring to ZABC_2.
    The only difference between the 2 queries is the selection option paramenters.
    Please let me know any way forward on this.
    Points will be awared for useful replies.

    Hi Rajesh J Salecha,
    What I understood is like :
    You have two queries and both gives same results but one of the query having a parameter.
    You have one report which is using query1.  Now you want that report to be copied as Report2 and use Query2 instead of Query1.
    If the this is the issue, then you copy Report1 as Report2 and go in Database and change the Data source location to Query2.
    Hope this will help you.  If my understanding is wrong then give us the work flow.
    Thanks,
    Sastry

  • Spatial Query that uses Result of another Spatial Query

    Hi all,
    I am using the SDO_DIFFERENCE Operator to return the difference between a query window and an intersection geometry. This is fine and i get an object back that is cast to a STRUCT using the SDO API. I want then to use this (returned)object in another SQL query that uses the SDO_RELATE Operator. The problem is that i dont know what type it needs to be so that the SDO_RELATE operator will accept it as a valid argument. Has anyone done this before or seen anything like it? Any help will be very much appreciated.
    Keith.

    Thanks for your help,
    I have done the following steps, but i still dont understand why it doesnt work.
    CREATE TABLE val_results (sdo_rowid ROWID, result varchar2(1000));
    CALL SDO_GEOM.VALIDATE_LAYER_WITH_CONTEXT('SHAPES','SHAPE','VAL_RESULTS');
    SELECT * FROM val_results;
    1 null     Rows Processed <3>
    2 AAARDDAAEAAAAA+AAA     13348 [Element <1>] [Ring <1>]
    3 AAARDDAAEAAAAA+AAB     13367 [Element <1>] [Ring <1>]
    SELECT shape_id,SDO_GEOM.VALIDATE_GEOMETRY_WITH_CONTEXT(c.shape, 0.005)
    FROM shapes c;
    3     TRUE
    2     13348 [Element <1>] [Ring <1>]
    1     13367 [Element <1>] [Ring <1>]
    If my rectangle and polygon is still invalid, can someone tell me why they are invalid. And how can i make them valid?
    Thanks.
    UPDATE:
    I have solved Polygon issue.
    In Spatial Developer's Guide it says:
    Simple polygon whose vertices are connected by straight line
    segments. You must specify a point for each vertex; and the
    last point specified must be exactly the same point as the first
    (within the tolerance value), to close the polygon. For
    example, for a 4-sided polygon, specify 5 points, with point 5
    the same as point 1.
    I have added a point to polygon which is same as first point. Now, it can find the point in polygon.
    INSERT INTO shapes VALUES (4, 'Polygon', SDO_GEOMETRY(2003, NULL, NULL, SDO_ELEM_INFO_ARRAY(1,1003,1), SDO_ORDINATE_ARRAY(306,193,130,441,489,653,88,183,442,354,306,193)));
    But, when i run this query again:
    SELECT shape_id,SDO_GEOM.VALIDATE_GEOMETRY_WITH_CONTEXT(c.shape, 0.005) FROM shapes c;
    4     13349 [Element <1>] [Ring <1>][Edge <4>][Edge <1>]
    3     TRUE
    2     13348 [Element <1>] [Ring <1>]
    1     13367 [Element <1>] [Ring <1>]
    it doesn't say TRUE like it did for Circle ??
    Edited by: WhiteScars on Jan 4, 2010 12:45 AM

  • Yet another major gripe with APE - restricting connection to home network

    Yet another serious issue I have with APE is the fact that since very often, the computer just can't see the base station (even when it is located 30 inches from it...) it will just automatically connect to the next available open wifi network, which happens to be my neighbor's... that way I often finding myself surfing someone's else's unsecured network and it's ******* me off.
    I tried to delete all wireless networks from system preferences/network/Airport but this does not makes a difference. Any idea on how to restrict my computer to the APE or at least have Mac OS warn me every time before it connects to an unsecured wireless network?
    Thanks.

    Somewhat easy: I'm assuming you're using Leopard, mainly because I ran through the options from leopard. Other versions of OS X may have slightly different placement or names...
    Click on the airport icon in the menu bar.
    Choose "Open Network Preferences"
    Select "Airport"
    There's a checkbox labeled "Ask to join new networks" Make sure it is enabled.
    Select "advanced..." (it's a button, lower right)
    You can change the connection order by dragging your network to the top of the list.
    You can also click on a connection you don't want, then click on the '-' button below it to remove that connection. (and at least the first time, the computer will ask you if you want to connect)
    You can go a step futher, by de-selecting the checkbox labeled "Remember any network this computer has joined" That way it won't add anything to your list of 'remembered' networks.
    Message was edited by: pariah0

  • Display hints, custom format method in VO, is there yet another way?

    Did you experience the same and had a solution?
    Hi,
    I am using JDeveloper 10.1.3.4 and looking for yet another way of customizing the display of an attribute of a view object.
    I have two tables: BILL and AWARDS, with composite foreign key relationship (on the LDAP_UID and TERM fields) between them, as illustrated below.
    The BILL table:
    NAME       LDAP_UID    TERM   CREDIT_HRS
    Tom Smith  tom.simth   200902       12.5
    Jane Lopez jane.lopez  200906        4.0
    The AWARD table:
    LDAP_UID    TERM  SOURCE     APPLIED
    tom.smith  200902 Perkins     2000.00
    tom.smith  200906 Direct      1300.00
    jane.lopez 200906 CN           500.00 At the business data model level, this is master(Bill)/detail(Awards) relationship. Bill is dragged from the data control palette to the page and displayed as a form, and Awards is dragged to the page as a table. When tom.smith logs in and chooses the 200902 TERM, the master and detail are joined on tom.smith=tom.smith and 200902=200902, so the $2,000.00 of Perkins loan is retrieved for him:
    Name Tom Smith
    Term 200902
    Source    Applied  
    Perkins   $2,000.00That works fine but not user friendly: the values in the TERMS column are a bit cryptic and need to be displayed in plain English, i.e., 200902 should be displayed as "Spring 2009" and 200906 as "Summer 2009". The display hints in the VO can not handle this. The only other way I know is writing a method in the Row class of the VO to do the translation. And this is the result:
    Name Tom Smith
    Term Spring 2009
    Source        Applied  
    No rows yet   Obviously, "Spring 2009" is used not only for display, but also for joining the master and detail tables. Of course "Spring 2009"!=200902, therefore no detail is retrieved for the user.
    Question is: is there yet another way to customize the display, that does not affect the join of master and detail tables?
    Many thanks for your help!
    Newman

    Hi, Chris,
    That works!
    I found the chapter where transient attribute is explained and an example is given creating a transient attribute in the entity object. It turned out that transient attribute works both in entity object and view object. I did it in the VO and it solves my problem.
    I spent hours of time before posting that question, trying two different ways but neither worked. Your one sentence saved me a lot of time. I do appreciate you help very much!
    Truly,
    Newman

  • HT4191 why do you need yet another email address to sync notes

    Is there a way to sync ipad notes with an imac desktop without opening up yet another unwanted "email" address?  Why do compaines constantly demand that you open up email addresses through all of them? 

    Notes are very special, their sync is done by IMAP(mail) server that syncs our emails. In order to sync notes you "have to" be connected to that IMAP and mail account is "your connection". BTW mail "ON" button will not sync your emails - it only syncs email settings between devices, like server rules, blocked servers, etc. It will not reflect on other icloud stuff, but what it will do is move your notes sync from current  sync ( if one exsits) to different. For example you notes currently can be local (on my phone), Yahoo or exchange like google. (you can check that by going to settings - mail contacts and calendars- and under your mail accounts you will see small "contacts" "calendars" and if you will see "notes" that would be your current syncing IMAP.

  • Another RAW Query

    Hi There.
    Another RAW query. I have PS CS4 Extended 11. I have tried to open RAW (NEF) pictures from my NIKON D3100. I get the error message 'Could not complete your request because it is not the right kind of document'. I have tried downloading the latest update. I currently have Camera RAW Version 5.7.0.213. I have also downloaded the DNG converter but I still get the same error. I am using Windows 7 on a laptop.
    Please help, otherwise no RAW Photography for me!
    Regards Mike.

    You need at least ACR 6.3 and you can not get there with CS4.  You either have to upgrade to CS6 or CC, or use the latest DNG converter. 

Maybe you are looking for