Yet another Which Audio Interface???

I apologise for what has probably already been answered, but I want to recycle my Digi002r as a stern anchor for my boat...but I'm afraid I'll still be waiting on some as yet unwritten driver from Digi before it works.
My shortlist is
Ensemble,
Fireface 800,
Metric Halo 2882.
I'm hearing glowing words about the sound quality of the Apogee Ensemble.
recomendations please?
Keith Moore

I use MH, I think their interfaces are great - the only thing I do worry about is the Hardware design is a few years old now. In technology, this is getting to be an old design. Beyond that, the only problem I have had with a MH was a manufacturing defect which was acknowledged in a specific run, which they handled very well. They covered everything and I had it back within a few days of contacting them. Before it was fixed, it ran like an 002 - but sounded better. Now it just stays on all the time and does what it should without problems.

Similar Messages

  • Which audio interface to buy?

    I have a macbook and have just bought logic express 8. I was going to get a Tascam US122L usb interface and a couple of pre-amps, but I have read horrible reviews about it especially saying it doesn't work with Leopard. I've read good things about Presonus Firepod but it's expensive at $429. Please can people reply and tell me which audio interfaces they are using succesfully with Leopard and Logic Express 8? Thanks!

    The FirePod does present with problems and is for a lot of stuff going on. Is that what you really want? I have seen the sister of the FirePod, the FireBox, for as little as $249 or, with a free headphone or mic, for $299. I am using it with great success now and I had so many problems with it those problems were not MY fault! Now, I am more confident. The FireBox is great and, should you want to keep in touch with me as a helping hand (we could help each other as well!), we could do that.
    Anyse

  • Which audio interface(s) for 16 to 20 analog outputs?

    Hi. I wonder if anyone can help me...
    I'm running Logic 7.2 on a black MacBook. For my inputs I am using the MOTU 8pre, as this is convenient especially when recording drums with my band... no scrambling together of pre-amps... no faff...
    The thing is... I've been given a shed load of gear (literally), including a 24 channel analog mixing desk and tons of outboard rackmounted effects units/compressors/gates...
    I would REALLY love to integrate the two systems, especially at the mixing stage, by routing my Logic tracks to the desk. Unfortunately, the MOTU 8pre only has a couple of analog outputs (+ headphone out).
    To make this a venture worth undergoing, I'm going to need a minimum of 16 analog outputs. 20 would be great if possible.
    I suppose my initial questions are:
    1. Can I daisy-chain 2 firewire audio interfaces (each with 8 analog outputs) to give me a total of 16 analog outputs?
    2. Bearing in mind I have a low budget, could anyone advise me on which units to get. I don't think I could afford any more MOTU gear, unless I find an amazingly low priced second hand item. What about Edirol or M-Audio?
    Thanks in advance.
    MS

    This is worth checking: http://www.ioneconnects.com/product.shtml
    Based on new DICE II firewire chip with JetPLL technology (should have much lower jitter than regular firewire Audio devices that are not built on DICE II).
    I believe that you can choose the configuration you need.
    The only question for me is whether they are affected by apple's firewire streaming bug. But as I've heard that in the info of 10.4.9 SDK is a statement, that core audio bugs were repaired, I hope the offset streaming problem will be finally the past...
    Man I am really considering this firewire snake, as it definitelly has many ins and outs - including 4 AES/SPDIF in and out!!!
    I am going to upgrade my studio and two of those will probably give me enough ins and outs for all my needs (musicians + outboard hardware and a summing mixer). I was also thinking about Symphony (PCI solution seems to be still more stable than firewire) and some I/O "modules" from apogee, but that is much more expensive. And I 've read only positive info about the DICE II, so maybe I will give a firewire another chance...

  • Which Audio Interface Please?

    Hi,
    Looking to buy a audio interface real soon but confused as to which one to purchase from the following list:
    a) Edirol FA-66
    b) Presonus Firebox
    c) Focusrite Saffire LE
    Would really appreciate people's opinions on the above - pros/cons, ease of use, sound quality, working with MBP with Logic Studio.
    Thanks.

    Am I correct in that the DX 7 is a full professional synth- I think it will have audio outputs. In that case you would be able to run it into your duet (I think) and of course it could output as MIDI as well.
    Does the DX 7 output into an amplifier if you wanted it to- for stage use? If so, then the output of that will go into the audio inputs of the Duet I imagine quite nicely. If it plays through a little speaker on the instrument itself then you should get that sound into your DAW through the Duet.
    The M-Audio is only a MIDI interface: it won't do anything other than that. So you would be able to use your DX 7 as a controller for sending out MIDI data, through the M-Audio, which will then be the data that makes your software synthesizers, either built into Logic or third party, sound. You would be using the DX 7 only as a MIDI controller at this point, which is less than it was designed to do overall but MIDI is MIDI- with one peculiarity I discovered: apparently the DX 7 only allowed for a velocity of 90 out of 127 as it's peak. Velocity is roughly how hard something is hit in MIDI relating to how loudly it sounds. (This is an over simplification, but should make the concept clear.)
    This will likely not be a big deal, and may not actually be true with your specific machine, I'm just telling you.
    As far as guitar, you could just plug it in to the Duet and use the amp modeling software in Logic (only so-so) or a third party thing like Amplitube. You may need some pre-amplification for it- I use a Presonus Tube Pre. (I should mention that I don't have a Duet- I'm going by the tons of good reviews I've read on it here.) You can also use the Duet with microphones obviously, and mic the cabinet or the acoustic guitar as well.
    My overall point is that while you may have to deal with a weak point in your chain, the quality of your A/D converters will be something you can never overcome- I mean, everything happens there. That is why I'm telling you go get something good if you can at the moment and be done with it. MIDI doesn't matter because it isn't sound, it's just data that tells things how to make sound somewhere else, so it doesn't degrade. Audio degrades everywhere, but having a good A/D converter will give you a good chance to have something good sounding.

  • Help! which Audio Interface to buy?

    Hi,
    I have just got garageband and have fiddled with it for a few months now so Im comfortable with it. I now wnat to connect my Condenser Mic (RODE NT1-A) which will need phantom power and my electric guitar . Everything else will be recorded with the inbuilt soft synths on GB. I know nothing of audio interfaces and am only familar with M Audio Fast track as a brand.
    I want to spend no more than £100 ( or less on ebay second hand) but Im confused by the vast choice. I was tempted by the cheaper M audio fast track with 1 xlr input and 1 for guitar. Does any one use one and if so will it be powerful enough for my condenser mic with phantom power ?
    Cheers
    Paul

    I use a Presonus FireStudio Mobile with my Rode Mic's. http://www.presonus.com/products/FireStudio-Mobile I use an NT5 and NT2000. Both work great with the unit.. Its FireWire though which you may not have on your machine. I have used an early M-Audio Fast Track and would not recomend it to others. Cheers

  • Which audio interfaces work well with CoreAudio?

    A number of older USB and Firewire audio interfaces do not appear to work properly with Tiger's CoreAudio, which promises major advantages in very low latency recording. Without a proper CoreAudio driver, audio can be reduced to mostly noise with just a trace of audio remaining.
    This information is difficult to find until you actually try to use a device and find that it doesn't work. Several devices I tried out last summer right after Tiger was released did not work, though they promised fixes, but I don't want to have to pay more restocking fees for devices that don't work
    Could someone post a list (or a link to a list) of devices that DO work? Thanks!

    Hi there,
    don't buy M-Audio interfaces! I had USB and FireWire audio interfaces from them, their hardware is ok, but the software (drivers) suck! I had extremely bad latency problems. I even started a thread about it a while ago. Now I use an EDIROL FA-66 FireWire audio interface. It's a little more expensive than the M-Audio, but it works and it does NOT need any drivers because it's fully Core Audio compatible! Works good for me. I've heard similar good opinions on the Presonus FW interfaces. Hope that helps!
    Björn

  • Which audio interfaces are compatible with a Lightning to USB Camera adapter???

    Would like to use my iPad Mini with Lightning Adapter in conjunction with an audio interface. What are the requirements for a device that would accept the adapter (what type of USB input/output). Thanks!

    It should work.
    Reset the iPad. Press and hold both the Home button and the Sleep/Wake button continuously until the Apple logo appears. Then release the button and let the device restart. You will not lose data doing this. It's like a computer reboot.
    And, just is case, did you remember to turn the camera on after it was connected to the iPad?

  • Which Audio Interface for Me?

    Okay, I have decided to make the switch from my iMic and a mixer to an audio interface that has two inputs so I can record two channels at once. I may be using external pre's at times so it must have line-in's. Also, right now I am using a Rev. A Mac Mini, but soon I will be upgrading to a Mac Intel Book to be named later. I will mainly use this to record acoustic guitar, vocals, bass, and ocassionally drums (using a mixer to sub mix and then into the audio interface). I will do everything for my own home enjoyment so my standards are real high. Here are the possibilities I have come up with from the Sweetwater catalog in my price range ($150 - $300):
    1.)Lexicon Alpha (this is a new model) or Lambda - both are USB
    2.)Tapco Link.USB
    3.)Makie Spike (USB)
    4.)Alesis io I 14 (what is this thing USB or Firewire?)
    5.)M-Audio Firewire 410
    6.)Presonus Firebox
    It doesn't matter to me if it is USB or Firewire, I guess my biggest requirement is the ability to use the line-in for external pre's. Thanks for any help!

    I guess you guys mean that I could pan channel one
    left and two right and then into the iMic?
    That's correct
    There are two jacks on the iMic I see,
    No, one of those is the input, one of those is the output (you could plug headphoines into that one)
    but I guess I don't
    understand how I can have those on two seperate
    channels in garageband.
    That's the easy part. Create a New Basic Track and click the "I"nfo button, then set the input popUp menu to "Channel 1 (Mono)". Create a second New Basic Track and set it's Input popUp menu to "Channel 2 (mono)". Make sure the little red Record Enable buttons are on for both track and hit record. You'll be recording 2 tracks.
    Also, I think one thing for
    me as that my mixer didn't have in/outs on each
    channel so I can use external pre's.
    Okay, like I said, I would never dissuade someone from getting a better interface, and the iMic is nowhere near the Top Of The Line...
    I use PreSonus' FirePod and for the year+ that I've had it I've been thrilled with it. I have no person al experience with the FireBox, but PreSonus has an excellent reputation so if it has the features you want, I'd expect it to be a great product.
    Finally, I guess I should say that I'm using
    Garageband now, but had thought about Logic Express
    in the future. Thanks for the help
    Any of the interfaces you listed should work fine with whatever software you want to use (the compatibility question is not really with the software, but rather the hardware. If the interface works on your Mac then it will work with GB and Logic).
    Hope that helps --HangTime [Will Compute for Food] B-|>

  • Which audio interface?

    What is the best low to mid range audio interface with spdif & phantom power? I only need a couple of inputs. It will be used with Garage Band for now.
    Also, I used to use an Apple G4 with Digital Peformer 3 (yep, 3), Motu, and a Yamaha O1V. I've been out of music and just want to play with my onboard GB that came with my new iMac. How does this new set up compare these days? Thanks!

    I have no idea about the "best", but I have one of these:
    http://www.amazon.com/M-Audio-Firewire-US35030-Audio-Interface/dp/B0006A9M3K
    It has two inputs, a 1/4" and an XLR. It has phantom power and S/PDIF in/out. It's about $200.
    It has worked great for me both in GarageBand and now in Logic Pro 9.
    Any Mac you get today will be at least 4 times, if not 10 times, faster than the last G4 you used. iMac works fine for GarageBand projects.
    Message was edited by: Rob Ross - added info about G4 speed comparison to current products

  • Which audio interface should I pick?

    So I recently purchased a brand new MBP, and am pleased to discover that my Tascam US-122 that I have been working with for the past 8 years (and four computers) has finally stopped being compatible with my computer. That, then, gives me the task of purchasing a new interface.
    The last major recording project I did, I tracked drums on a Presonus Firestudio Tube, and I loved it. I'm willing to make the investment in a heftier interface, with more audio inputs and (obviously) a higher price tag, but I am caught in the question of whether to get a FireWire or USB interface. I have heard different upsides and downsides about the two of them. Personally, at this point, I am more inclined to go with a FireWire interface, as it leaves me with both of my USB ports (which I use for a mouse and midi controller while recording), and I have never had latency issues with FireWire (even on a 4-year old MacBook).
    So now, I am asking for input. I am not brand-specific or anything like that. I just want one that works, sounds good, and won't give me trouble.

    There is no way to answer your question. You need to look at what you will be running and then select the computer that will be the best for those applications.
    Barry

  • Yet another cocoa without interface builder post

    I am sure its been brought up before. I would like to know if its possible to write Cocoa apps without Xcode, Interface Builder, or NIB files in general; another words, write Cocoa programs programmatically using ONLY Objective C. Before you ask me why I would want to do such a thing and that I am crazy, please hear me out.
    I come from a Win32 background, and my primary languages are C and C++. I am getting used to Objective C (though I wish I could use C++ to program in Cocoa). I picked up a copy of Cocoa(R) Programming for Mac(R) OS X (3rd Edition) by Aaron Hillegass, and have been trying to learn cocoa from it for the last few months. Basically, I am having big trouble wrapping my mind around cocoa via the very conceptual high level approach this book takes. I can not for the life of me begin to understand this whole making connections with interface builder.
    I do NOT plan to write production applications in cocoa by hand, but if I could just write a few trivial applications in cocoa by hand without interface builder or nib files, perhaps when I do use interface builder, I won't have such a hard time understanding whats going on.
    Thanks in advance for the help.

    __mikem wrote:
    I am sure its been brought up before.
    I don't care. Your question isn't about learning how to program and learning via the iPhone SDK. I'll do anything I can for you
    I would like to know if its possible to write Cocoa apps without Xcode, Interface Builder, or NIB files in general; another words, write Cocoa programs programmatically using ONLY Objective C.
    Certainly. You can write command-line Cocoa apps. Xcode is just an IDE like Visual Studio.
    Before you ask me why I would want to do such a thing and that I am crazy, please hear me out.
    I come from a Win32 background, and my primary languages are C and C++. I am getting used to Objective C (though I wish I could use C++ to program in Cocoa). I picked up a copy of Cocoa(R) Programming for Mac(R) OS X (3rd Edition) by Aaron Hillegass, and have been trying to learn cocoa from it for the last few months. Basically, I am having big trouble wrapping my mind around cocoa via the very conceptual high level approach this book takes. I can not for the life of me begin to understand this whole making connections with interface builder.
    You specifically asked to avoid the topic, but I'm sure there are several of us who are really tired of iPhone questions who would be happy to try our hand at explaining the User Interface architecture in Cocoa - if you want to try.
    I do NOT plan to write production applications in cocoa by hand, but if I could just write a few trivial applications in cocoa by hand without interface builder or nib files, perhaps when I do use interface builder, I won't have such a hard time understanding whats going on.
    You can write Objective-C programs using whatever editor and IDE/makefile you want. You can even work with all the non-UI parts of Cocoa to get a feel of how it works. Technically, you could write code using only Carbon and never use Objective-C, but that is really a dead-end.
    A good idea might be start looking at doing writing MacOS X kernel extensions. You should still use Xcode, but only as an IDE. The code would all be C++ (or a subset thereof) with no user interface or NIB files. Realistically, that is probably harder than learning Interface Builder, but it is probably the most productive path available to you for developing MacOS X and avoiding Interface Builder.

  • Protools 8 compatibli​ty with Windows Vista and which proper audio interface?

    O K i have a compaq presario pc notebook with a cpu of 2.16 ghz and 160 gb(?) hard drive with 32 bit w/ Window Vista service pack 1. I've done a little research and it seems my computer may be compatible but i'm not sure  Is ne one using pt 8 with windows vista with no problems? also i'm not so sure about which audio interface i should be using psi, firewire,or usb even though i have 2 usb ports im hearing  its not the best choice dealing with latency and all. Is ne one using pt 8 with window vista using a usb audio interface or even firewire with any problems? thanx hope to hear from you soon!!!!

    Hi again chamille2010,
    Well my take would be that your rig would run Pro Tools 8 but you might struggle with the latency a bit.  I ran Pro Tools LE on a PC (with significantly lower specs than yours since it was 3 years old at the time) with a Digi 002 as my firewire interface and I did have issues with latency, which is my biggest pet peeve.  That was also on the XP Operating System so you might be better off with Vista SP1.  I would recommend going with the Digi 003 via firewire and maxing out your RAM for best results.  USB would definitely be slower and might be a cause for latency if you run into it. 
    That's my opinion.  Digidesign has a pretty in-depth site for making sure your system will run Pro Tools.  I'm sure you've already checked it out but just in case:
    http://www.digidesign.com/index.cfm?langid=100&nav​id=54&itemid=23954

  • USB Audio Interface Mystery

    I have an HP Envy TouchSmart m7.  Purchased it with Win 8 and upgraded to Win 8.1 update 1 (with August 2014 update).
    No issues with the exception of a USB device.  I normally have not used any USB devices - no USB keyboard, no USB printer, etc.. I have used a USB mouse once in a blue moon - but I do use a USB audio interface for my MIDI keyboard regularly.
    It works fine until I connect a cable from any of the outputs to a mixer or amp.  Within minutes, I hear a click and my audio driver stops responding as if the device rebooted - I'm assuming because of a USB power or data drop-out.  I've replaced my audio interface, tried different power sources, different locations, all types of surge strips, modified power settings, replaced mixers, upgraded my BIOS, checked Windows updates, been talking with the maker of my audio interface (who even sent me custom drivers) and talking with the makers of my music software - all of them are at wits end saying to simply use another computer.
    Help - help and help!  I cannot perform with my audio interface not working.  I have to connect it in order to hear sound.  Everything seems to point to hardware on my laptop.  Any ideas or fixes for this laptop?
    Thanks,
    Chris

    Hello,
    AS I stated earlier - the maker of the problematic device (which has a solid reputation) has sent me new drivers that aren't widely available although the drivers seemed and still seem solid and I've never mentioned nor had an issue with latency.  Although you said I didn't mention updating any of the drivers, I may have inferred it by saying I installed any and all Windows updates which included drivers.
    I have worked with PC's for 20 years, building, supporting, programming, etc.. I have seen a plethora of problems that run the gamut of easy to very complex and even to unexplainable - which I usually don't accept.. lol.  This laptop runs smooth and I've tuned it up as my main music machine but this issue runs pretty deep and on the surface I can't see a driver issue, no latency issues and no updates pending for anything.  What has my curiousity and perhaps I've not been as detailed as I shoud have been but that this problem does NOT occur and may never have  occurred if I only used headphones.  It only happens when a cable - any cable - is plugged up from my audio device to another device like a mixer or amp.
    That's why I explored grouding issues, electrical possibilities etc.  This may be a complex combination of several factors.  Maybe a USB issue, along with a driver and/or even a deep OS issue along with grounding?
    Thanks for the link to Windows 8 Tuning Tips for Audio processing but honestly, I had already performed these modifications way before I found that article and read it even before you posted the link.  But thanks for being thorough.
    I'd actually be happy if I had to address some clicking or popping - but a complete failure when only cables are connected?  What can I do in the cabling to prevent surges?  I hate to purchase expensive equipment to troubleshoot this, find a surge issue only to have to purchase another laptop, audio interface or something.  Throwing more money at it for only troubleshooting purposes doesn't seem pleasant to me.
    I have blue screen logs, memory dump files, etc which have been handed over to Focusrite and still nothing.  I'd like to install Win 10 on it to see if this reoccurs or drop back to Win 7.  I don't know what to do,,,  my first audio interface device to fulfill my dreams of playing live performances and I hit this.. Agh!!!
    Frustrated but still willing to troubleshoot,
    Thanks,
    Chris

  • Hard-drive and audio interface set-up - Advice please

    Hello,
    Please offer me some advice if you can. I have the new 13" macbook pro 2.26Ghz with Logic Studio. I am going to get a hard-drive that has both usb and firewire 800 interfaces and need to decide whether to get a usb or firewire audio interface. The crux of my problem is in what configuration to use the devices, which will determine which audio interface I choose. E.g.
    1. Firewire 800 hard-drive to record tracks onto and back-up + usb audio interface; or
    2. Firewire 800 hard-drive as above + firewire 400 audio interface daisy-chained; or
    3. Record onto the internal hard-drive and use a usb audio interface; or
    4. Record onto the internal hard-drive and use a firewire 400 interface.
    FYI, the audio interfaces I'm looking at are the E-Mu 0404 USB or Focusrite Saffire LE, both of which have had excellent reviews.
    Questions to consider, please, are: Which configuration will offer the best performance and least latency? Is it worth recording onto external hard-drive (7,200) or will the internal drive (5,200) be faster/as fast? Will daisy-chaining cause a significant drop in performance? Do you have any alternative configuration suggestions? Plus any other comments you can think of.
    Thank you in advance
    Jamie

    The good thing about #2, if the drive enclosure also has a USB 2.0 interface you have the option of using/trying that configuration as well. I know a few that get away with using USB drives for recording.
    Make sure the audio drive is formatted Mac OS Extended, with Journaling OFF.
    Don't trust the drive formatting as it's delivered.
    pancenter-

  • Will this setup run okay and audio interface advice please!

    Okay, please forgive me any stupid comments. I am merely a humble musician been thrown into the deep end by some friends looking for a sound tech for their show.
    Will all this play nice with each other in this setup?
    2 x radio mics > 2 channel receiver > audio interface > macbook (mainstage)
    1 x radio mic > receiver > (line-in) macbook (mainstage)
    then....
    macbook > audio interface > pa
    I don't yet have an audio interface. Any reccomendations and suggestions welcome. USB preferred, nothing flashy just something that does the job.
    Thank you!

    mouseduckalien wrote:
    2 x radio mics > 2 channel receiver > audio interface > macbook (mainstage)
    1 x radio mic > receiver > (line-in) macbook (mainstage)
    Hi
    For this to work, you would need to set up an Aggregate device using Audio MIDI Setup, and then to set Mainstage audio preferences to use this aggregate as the audio input device.
    You might do better to get an audio interface with more than 2 inputs?
    CCT

Maybe you are looking for

  • Can someone pleas tell me about abap, java and xslt mappings

    Hi, can someone please tell me about abap, java and xslt mappings. Thanks, Bernard.

  • My iMac is conflicting with my Comcast router

    Hi, I have a new Comcast connection that's driving me crazy.  All other devices (including a PC laptop, wireless printer, iPhone and MacBookPro) on the network are trouble free, but the iMac keeps loosing connectivity with the internet intermittently

  • WebDAV, XDB and Static File

    How to.. <OL type="1"> <LI>Using only what XE offers out-of-box, configure XE/XDB/Listener/whatnot to display static file (e.g index.html) at the root URL: http:// localhost:8080 <LI>NOT using IE,Create folder in XDB </OL> thanks <span style="font-si

  • Automated prproj enqueue in media encoder?

    I am using CS4 and would like to take an existing Premiere Pro prproj file and enqueue this in an automated way into media encoder. Means not via the ME dialog or drag and drop. I tried the watchfolder but dropping a prproj file into there doesn't tr

  • PCs having trouble displaying embedded quicktime

    Hello, I am trying to embed a quicktime streaming video to my webpage: www.whbr.org. It seems to work fine on my mac computer, but alot of our PCs are not displaying the video. Here is the code I am using: <object classid="clsid:02BF25D5-8C17-4B23-BC