Yet another wifi query for the 5800

Having trawled the net and tried almost every fix, can anyone point me in the right direction?
5800, & BT voyager2100.
It's paired, the wifi symbol shows up when I try to connect, but STILL I get the dreaded "web:no gateway" message after about 15 seconds. But I know it's connected because the config panel on the PC shows the phone IP under 'connected devices', which I presume it wouldn't do if MAC filtering was on.
BTW I've manually altered the default gateway/DNS/subnetmask/etc settings under the 'IPv4' panel as suggested elsewhere on here, but still no joy....
Where do I go now? In fact, IS there a fix?
Thanks

This may be a dumb question, but have you set your PC to allow internet sharing via BT? If you can connect to your PC via BT but not get to the internet your PC is blocking access.
If I have helped you with your problem in some way, please take a little time and hit the kudos button in my post. Without your feedback, I don't know if I am being helpful or should just be put out to pasture.

Similar Messages

Have one WiFi signal into the apartment for my Air, and another wifi signal for my 5c phone plan. Both from the same provider. Expensive. Is there a way to 'combine' WiFi signals so I pay only for one, but can get on the Internet with my Air?

Have one WiFi signal into the apartment for my Air, and another wifi signal for my 5c phone plan. Both from the same provider. Expensive. Is there a way to 'combine' WiFi signals so I pay only for one, but can get on the Internet with my Air?

Roamingnome, thanks for your response. Although I have been a Bell (Canada) customer for my WiFi signal for years, the 5c and its necessary mobility plan, is very recent. Some years ago, Bell supplied its own ‘router’ for my computer, and claimed that it was possible to get their WiFi signal only with the router they supplied. When I recently received the 5c, I wondered if the plan it requires, which is within the much wider, overall Bell zone, could be used somehow to get my Air online - some sort of tethering? - that allows me to give up the Air WiFi service and router all together, but still get the Air connected. Here in Canada, Bell Mobility and other Bell services are very separate. Any suggestions appreciated.

Source, and Fix, for Event 8194 VSS "access denied" querying for the IVssWriterCallback

Friends I encountered this error, pasted intact below, just a couple of days ago on a ia64 architecture HP system running Windows 7 Ultimate x64
It appears that I may have a permissions issue somewhere but I do not know how to permanently root-cause-remedy it. I should note that I do not have any routine backup service running on this particular mule, and no such animal was working at the time
of the issue, so I'm baffled as to what invoked the process. To anticipate a question you may have: I did not use on this system a recent "registry cleanup" tool except that which Microsoft uses in a couple of automated packages: one to do
.NET cleanup, and another to resolve Uninstall/Install issues [this one succeeded... the .NET issue is another story].
This system is a Homegroup owner/creator, but is not on a domain. It is essentially a lab mule that I use for tech work - other windows 7 clients fetch files from it via a bridged wifi AP.
Thank you in advance for any direction you have for me.
Paste below
twest
Log Name:      Application
Source:        VSS
Date:          8/18/2012 6:36:49 PM
Event ID:      8194
Task Category: None
Level:         Error
Keywords:      Classic
User:          N/A
Computer:      BossHoss-PC
Description:
Volume Shadow Copy Service error: Unexpected error querying for the IVssWriterCallback interface. hr = 0x80070005, Access is denied.
. This is often caused by incorrect security settings in either the writer or requestor process.
Operation:
   Gathering Writer Data
Context:
   Writer Class Id: {e8132975-6f93-4464-a53e-
1050253ae220}
   Writer Name: System Writer
   Writer Instance ID: {a2af3afe-afb1-4346-bfd6-380873f59328}
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
    <Provider Name="VSS" />
    <EventID Qualifiers="0">8194</EventID>
    <Level>2</Level>
    <Task>0</Task>
    <Keywords>0x80000000000000</Keywords>
    <TimeCreated SystemTime="2012-08-18T23:36:49.000000000Z" />
    <EventRecordID>34091</EventRecordID>
    <Channel>Application</Channel>
    <Computer>BossHoss-PC</Computer>
    <Security />
</System>
<EventData>
    <Data>0x80070005, Access is denied.
</Data>
    <Data>
Operation:
   Gathering Writer Data
Context:
   Writer Class Id: {e8132975-6f93-4464-a53e-1050253ae220}
   Writer Name: System Writer
   Writer Instance ID: {a2af3afe-afb1-4346-bfd6-380873f59328}</Data>
    <Binary>2D20436F64653A20575254575254494330303030313236302D2043616C6C3A20575254575254494330303030313231342D205049443A202030303030313235322D205449443A202030303030313236382D20434D443A2020433A5C57696E646F77735C73797374656D33325C737663686F73742E657865202D6B204E6574776F726B53657276696365202020202020202D20557365723A204E616D653A204E5420415554484F524954595C4E4554574F524B20534552564943452C205349443A532D312D352D3230</Binary>
</EventData>
</Event>
Techwest Resources

Hi,
Firstly, would you please let us know what backup application you do use. Is it the build-in one?
Meanwhile, please refer to
Security Considerations for Requesters for details.
Hope this helps.
Jeremy Wu
TechNet Community Support

YAIS - Yet Another Installation Script for Archlinux

I wrote this script today and placed it in AUR. It can show you the way and make it easier to install an archlinux system.

orschiro wrote:
https://aur.archlinux.org/packages/yais/
Can you provide some more information?
Your README is not very extensive:
yais
Yet another installation script (for archlinux)
I updated the README, and added a TODO to the git repo. I also rewrote the PKGBUILD. It will be OK now.

Extracting the Logical sql query for the specified report in OBIEE 11g

Hi ,
I want to extract the logical SQL Query for the Particular report in OBIEE 11.1.1.5.
Any pointers related to this will be very helpful.
Thanks,
Sonali

for a try please add Logical sql view to ur report it will dispaly the Logical sql for that Report..
Hope it will helps you.

In a query, for the selection field 'KNB1-ZWELS' a match-code isn't availab

Hi All,
Creating a query, for the selection field 'KNB1-ZWELS' a match-code isn't available.
Could anyone tell me the reason?
Thanks
Gandalf

Hi,
Match Code Object is not available for the field ZWELS. If required, You need to contact a Developer for creating one .

Camera RAW does NOT yet support raw files for the new Canon Sureshot S95

Camera RAW does NOT yet support raw files for the new
Canon Sureshot S95.
Adobe, please can you provide an update asap

Hello!
I think that you need to be patient.
There has not been any release of Camera Raw since the release of the camera.
I recommend to try the next version once it will be released, as there might be preliminary support (and therefore not listed).
Usually, Adobe is amongs the firsts to support a new camera.
Even though the Camera Raw team is fielded with wonderful coders, I do not think that they do have a time machine to allow support before they have their hands on a camera

A script that will query for the last successful backup to tape across all protected datasources

I've searched trying to locate an existing script for this and come up empty so far but essentially what I am trying to do is have a script I can run that will query for the latest backup to tape that succeeded for each data source across all of the protection
groups then output that time/date for each to a file.
I'm extremely new to scripting so I am unsure of how to go about getting started with this so any help would be greatly appreciated!

this should work
foreach ($DS in $DSList)
$RP=$DS | Get-RecoveryPoint | where {$_.Location -eq "Media"} | Sort-Object -Property Backuptime -Descending | select -First 1 | select *
$Tape=Get-DPMTape -DPMLibrary $Library | where {$_.ID -eq $Rp.RecoverySourceLocations.MediaMapList.MediaId}
$obj = New-Object -TypeName PSObject
$obj | Add-Member Noteproperty -Name DatasourceName -value $DS.Name
$obj | Add-Member Noteproperty -Name Sourcecomputer -value $DS.Computer
$obj | Add-Member Noteproperty -Name BackupTime -value $RP.BackupTime
#$obj | Add-Member Noteproperty -Name Location -value $Tape.Location.tostring()
#$obj | Add-Member Noteproperty -Name Medialabel -value $Tape.Medialabel
#$obj | Add-Member Noteproperty -Name Barcode -value $Tape.Barcode.Value
$Array+=$obj
Seidl Michael | http://www.techguy.at | twitter.com/techguyat |
facebook.com/techguyat |
youtube.com/techguyat

How to write selection Query for the following requirment.

Hi All,
I am new to ABAP, I need a help ,
I need to select all plants(WERKS) from MARC at Plant/Material level,
then I need to take all sales organozation(VKORG) from T001w,
then I need the company code(BUKRS) from TVKO based on VKORG,
then I need the currency key(WAERS) from T001 based on BUKRS,
Can any one help me in writing selection Query for the same?
Thanks All,
Debrup.

Hi,
Its easy for you if you learn SELECT with JOIN to complete your task. So SEARCH the forum with SELECT statement and you will get a lot of examples using which you can write your own.
If you struck up anywhere revert back.
Regards
Karthik D

How to tune this query for the improve performance ?

Hi All,
How to tune this query for the improve performance ?
select a.claim_number,a.pay_cd,a.claim_occurrence_number,
case
when sum(case
when a.payment_status_cd ='0'
then a.payment_est_amt
else 0
end
)=0
then 0
else (sum(case
when a.payment_status_cd='0'and a.payment_est_amt > 0
then a.payment_est_amt
else 0
end)
- sum(case
when a.payment_status_cd<>'0'
then a.payment_amt
else 0
end))
end as estimate
from ins_claim_payment a
where a.as_of_date between '31-jan-03' and '30-aug-06'
and ( a.data_source = '25' or (a.data_source between '27' and '29'))
and substr(a.pay_cd,1,1) IN ('2','3','4','8','9')
group by a.claim_number, a.pay_cd, a.claim_occurrence_number
Thank you,
Mcka

Mcka
As well as EXPLAIN PLAN, let us know what proportion of rows are visited by this query. It may be that it is not using a full table scan when it should (or vice versa).
And of course we'd need to know what indexes are available, and how selective they are for the predicated you have in this query ...
Regards Nigel

Querying for the members of a group using the PRC

I've been combing through the PRC API for a way to query for the members of a group (not the ACL, but the member users and groups).
I can't find anything that seems to do this for Plumtree 5.0x using the PRC. Am I missing something or is this just not implemented? Seems like a major oversight to me. If any Plumtreevians are listening, can I add a feature request for those methods in your next release of the WS Server?
Thanks!
Chris Bucchere | bdg | [email protected] | http://www.bdg-online.com
Like blogs? Check out http://bdg-plumtree.blogspot.com

If you go into the Calendar section and select the Edit option for that calendar and then change the permissions for that calendar people should be able to subscribe to it.

Best Push email software for the 5800

Just thought I would pop this up as I have been trying out a lot of Push email products recently and finally think I have found one I like for the 5800!
I am currently using System Seven and it does almost everything I need - push email - with the option to view compatible emails in html.
My only issue with it is the fact you cant set HTML as standard and it doesnt have a clickable notification on the homescreen. (minor issues)
I have tried others like Emoze (works well and has a notification but the HTML emails done allow you to scroll and the scrolling is very tempremental in normal view.)
Mail for exchange doesn't have html although is now available for services such as Gmail etc...
Anyone got any better solutions or anything to add to this thread let me know.

I dunno, there aren't really any screen shots or concrete descriptions on the Evernote site, and I've never used it, but from looking at a video on their site, I'm not sure it would qualify for creating organizational charts. If Fred is looking for something that creates stuff like flow charts and the like, he may have better luck with OmniGraffle. Whether this is available on the Mac App Store, I don't know... but if not, don't bother with the Mac App Store and just download from the web site:
http://www.omnigroup.com/products/omnigraffle/

An error occurred while querying for the Webfolders path.

Hi Guys,
I have a logic file that runs a stored procedure and dtsx gets to that step it gives an error saying :"An error occurred while querying for the Webfolders path."
I saw that there were a similar post a while ago, but i am running the package from the DM.
Any ideas?
Regards,
AvdB

Hi Guys,
Thanks for the replies. Please have a look at the code and let me know what I am doing wrong.
'DEBUG(on)
TASK(ImportAccount,USER,%USER%)
TASK(ImportAccount,APPSET,%APPSET%)
TASK(ImportAccount,APP,%APP%)
TASK(ImportAccount,LOGICFILE,C:\BPC\Data\Webfolders\NewClicks\AdminApp\FINANCE\account_load.lgf)
TASK(ImportAccount,LOGICMODE,1)
PROMPT(MESSAGE,"When this package is running, end user functionality will be affected (i.e. data cannot be sent to the database or incorrect numbers can be retrieved from the database while this package is running)")
TASK(CreateAccount,DESCRIPTION,CreateAccount)
TASK(CreateAccount,APPSET,%APPSET%)
TASK(CreateAccount,APP,%APP%)
TASK(CreateAccount,USERID,%USER%)
TASK(CreateAccount,PROCESSMODE,4)
TASK(CreateAccount,DIMENSIONNAME,Account)
TASK(CreateAccount,SOURCETABLE,mbrAccount_shadow)
TASK(CreateAccount,BAPPLICATIONPROCESS,1)
TASK(CreateAccount,BTAKESYSTEMAVAILABLE,1)
Is there any documentation around this code? It is very difficult to debug something without the relevant documentation.
Regards,
Andries

Whats the Best WiFi Router For The iPod Touch?

Dont know if this is in the right sevtion or not, but feel free to yell at me if its not lol
What is the best brand of WiFi router (e.g. linksys, D-link etc) For the iPod Touch? And are there any bad WiFi routers for the iPod?
Any help is greatly appreciated, thanks!!

I can confirm 4 brands.
Linksys
Netgear
microsoft
Some cheap thing that came with verizon DSL
All have worked without any special configuration for the ipt.
Actually, I don't really think their is a better router, every network I have connected to worked, absolutly no trouble at all.
Btw- this message came from an 1.1.3 ipt via a netgear wireless connection.

Query for the FULL AND FINAL SETTLEMENT REPORT

Hi, any one has the query for the FULL AND FINAL SETTLEMENT REPORT in oracle hrms??

Hi,
I go through that .class file and find that they have used below package in that.
PAY_IN_TERM_RPRT_GEN_PKG
Hope this will help you.

Yet another wifi query for the 5800

Similar Messages

Maybe you are looking for