Yeti Mic & Playback issues - CS5

Hi all,
I am currently testing out my boss' Blue Yeti USB mic for video interviews we will be doing in the near future. Per the instruction manual, I have changed my system preferences to default to the Yeti.
When my headphones are plugged into the Yeti I can hear the audio. I press record in SoundBooth CS5 and I see the bars moving and sound waves appear on the screen. However, when I press the spacebar to play back what I have recorded I hear absolutely nothing, even over the biggest soundwaves.
I am not 100% familiar with SoundBooth, so I am not sure if this is a mic problem, program problem, user problem, or some weird combination of all 3.
Could anyone offer some advice? I would extremely appreciate it!
Thank you,
Megan

Read Harm on drive setup http://forums.adobe.com/thread/662972?tstart=0
- click the embedded picture in Harm's message to enlarge to reading size
Read Hunt on Partitions http://forums.adobe.com/thread/650708?tstart=0
- Never, Ever use partitions for video editing!!!
And even more hardware discussion http://forums.adobe.com/community/premiere/hardware_forum

Similar Messages

Stuttering flv playback issue- need help asap

We need help asap. Have a project is due to deliver today (5/14).
We have a video to go on a dvd-rom, live action with Motion Graphics behind.
When output is done thru Projector the Motion Graphics stutter as they scroll.
Here is more technical info:
Stuttering flv playback issue:
Prores 422 timeline 29.97fps 1280x720 output from fcp using current settings.
Mov file is approx 7gb, plays relatively smooth on a mac pro with no raid.
Frame by frame analysis shows all frames are present with no jumps tears or skips.
Tried several output paths, programs and settings to create a smooth flv file to no avail.
We adjusted data rates from 2k, 3.5k, 4k and 8k, no luck
We adjusted keyframe rates from low to all frames, no luck.
We tried cs3 flash encoder, cs5 media encoder, squeeze ect, same results.
Playback in the flash projector seems to choke slightly no matter what we do.
Have also posted in the Director Forum.
Any help much appreciated!

Here are a few ideas off the top of my head:
Try playing the file using a different xtra, sometimes different ones will work better. If you have Director 11.5, there is a native flv playback xtra.
You can build a player easily in Flash using the flvPlayback component, then bring that into Director as a swf.
Once you have the video in Director, try making the member Direct To Stage (DTS). If it is already DTS, try making it not DTS.
Make sure the video is not transparent, and nothing in Director overlaps the video... in fact, when the video is playing, nothing should be moving at all, and try to keep the amount of code that is running to a minimum.
Try lowering your video's data rate further or try using a different codec.
Using VBR (Variable Bit Rate) compression often makes the video appear to play smoother.
Try compressing the flv with different software. FFMpeg, for example, is free and does a very good job, often better than the Flash Video Encoder that comes with Flash/Creative Suite.

Movie playback issues

My movies are having playback issues again. Default settings are 44.1kHz 16bps 720p HD.
Operating System: Windows 8
Itunes Version 12.1.0
The issue is the sound goes in the beginning of each film. I have a computer which is two years old and yet there seems to be a recurring problem with movie playback.

I think it depends on which version of iTunes you are using. I had the same problem with digital copy movies when I loaded the 64bit version of iTunes 8.1, iTunes64setup.exe, on a Vista machine. Once I deleted that version and loaded the 32bit version of iTunes 8.1, iTunessetup.exe, I was able to view the movie in iTunes AND download it to my iTouch.

Premiere Pro CS6 Mac Playback Issues

I've searched for similar issues, and while I found plenty of playback issues, I didn't see anything like what I'm experiencing.
MacPro Quad-Core Xeon 2.26 x2 (8b cores)
12 GB ram
OS 10.6.8 (can't update this due to other infrastructure)
Nvidia GeForce GT 120
FAST Fiber attached SAN
Local Raid0 media drive
I know the GPU isn't compatible with the Mercury hardware acceleration.
I've been a Premiere Pro user since version 2 and have kept current through the years. I'm happily running CS5.5 on PC's in my home office. I recently installed the trial version of CS6 on my Mac at work to evaluate for that environment, and I'm pulling my hair out trying to get over some basic issues. I have no problems with Media Encoder or AE.
In Premiere using preview or program (timeline), playback stops after roughly a second... though it varies by several frames each time. I tested this with various video files, .wav files, stills (jpeg, psd), etc. I even tested with black video and bars generated inside Premiere. The problem persists with all of the above... click play, and playback stops after about a second. Scrubbing works great... I've tried different playback resolutions. I'm not using any 3rd party monitoring devices or I/O cards on this machine.
I have FCP 7 installed on the same machine and have no trouble editing and playing 1080i video all day long.
Any ideas?
Thanks in advance!

The above suggestion worked for me briefly, but the problem keeps re-occuring.
I too am using Snow Leopard 10.6.8, NVIDIA gfx card (8800) and an ATI Radeon 5500.
Premiere played back fine in Lion and Mountain Lion, but I downgraded because I have old quicktime files and Final Cut 7 projects that i need to work with so Lion is not an option for me.
Bizarre behavior if you ask me.
Any help on this?

64bit Adobe Square & Hulu playback issues [SOLVED] for now

Back in mid September, I installed Adobe's flash player "Square" preview release. All was good including perfect Hulu playback.
As of this weekend, Hulu wouldn't play, and without a message as to why.
And yes, I'm aware of, and experienced the Hulu playback issue with the prior test version Adobe had available prior to Square.
Square fixed Hulu playback for me, but just temporairly.
Anyone else having this issues or is it just my system?
Version: Shockwave Flash 10.2 d161
Last edited by jeff story (2010-10-31 00:14:35)

Found this: http://forums.adobe.com/thread/738761?tstart=0
Apparently, RTMPE isn't functional yet, which Hulu now requires.
Hulu and Amazon which depends on RTMPE aren't currently functioning because there are some 64-bit libs that need to be integrated into the branch. That particular bug is set ToFix, but i can't speak to the timing.
Encrypted Real Time Messaging Protocol (RTMPE or RTMPTE) is a proprietary protocol created by Macromedia used for streaming video and DRM. It reportedly allows secure transfer of data without SSL. It is implemented in flash player 9.0.115 and some versions of Flash Media Server 3.
And this: http://forums.fedoraforum.org/showthread.php?p=1403271
Re: flash-plugin-10.2.161.23-1.x86_64.rpm
As of yesterday, Hulu is blocking the 64-bit plugin again.
This time it doesn't even give an error message, the video window just doesn't display.
I've gone back to the 32-bit plugin, which still works there.
Interesting, Hulu is blocking both 32- and 64-bit Linux versions of Square,
even though the release notes say that only 64-bit versions fail to support content protection.
Last edited by jeff story (2010-10-19 09:27:28)

Multicam playback issues

I have digitized a project into FCP at 8 bit instead of DV and seem to be having playback issues with the multicam. My settings are Safe Rt, Dynamic, Quarter playback frame rate, yet I am still dropping frames left and right. Is it possible that I need faster drives? I only got this system two years ago, I can't believe it won't play 8 bit. Any suggestions?
Thanks,
Rob

I'm digitizing digibeta tapes and I want it as uncompressed as I can get it so I digitized it at 8 bit uncompressed. I have a 4 bay Internal SATA Array. Each one holds 465 gigabytes and I think it has a 3.0 gigabit throughput if I'm reading the specs correctly. I've done DV multicam without a problem on my system but I was hoping to have a better quality product this time so I digitized at a higher compression rate ( or is it really a lower compression rate . . . ) All the media right now is on one drive. Does that matter? This is kind of where i wish I was working on an Avid . . . .

IPhone 5 music playback issues (after iOS 8 upgrade)

Hi,
After upgrading my iPhone 5 to iOS 8 I have had many playback issues with my Music. Songs randomly skipping or stopping without even doing anything are some of the issues. Also sometimes when I am listening to a song it would fast forward the music.
P.S. I don't sync my music, I just manually add content.
Is there any way I can fix this problem?
Thanks
L

My wife had something like this happen with her iPad. The problem was that the device had not been synced and so some file were not loaded on the device.
The way to correct the problem is to plug the device into the computer and tell it to sync.

Weird Playback Issue...

I have this weird playback issue with iTunes for Windows. I am using Vista and I think the cause of the problem is that I am using MacDrive to access my OS X partition. But anyways, on with the problem. So the problem is that when I play a song, the song will play for like 5 seconds and then it will just go the next song. This song will do the same thing, and so-on and so-forth. Then, during this time, my Mac formatted hard drive is unavailable while iTunes is running. In "My Computer" the drive is there, but when I try to open it, Explorer freezes. Then, when I exit iTunes, it doesn't really exit. It still shows up in the task manager and when I try to end the process, it just plain doesn't end. I have to restart my computer to gain full use of it again. After the restart I can access my Mac disks, but once I start iTunes and try to play a song, I get the same thing again. And in case thats not weird enough, I can play the MP3's in WMP fine, and they will also play in iTunes fine if I actually open them, rather than just select them from my library. If I go to file open and select a song on my Mac drive, it will play fine, but then once I try to play a song from my library, I get caught in that vicious cycle. Anyone else had this problem or anything? Thanks. Also, is there an alternative program to Mac Drive that will allow me to read HFS partitions?

Post more about your situation... what format is the video, and where are you storing the video files? i.e., on a disk other than your startup disk? The adobe install is likely not the problem... I run adobe software along side FCS on about 75 workstations, and don't see issues like you describe.
Wavy? not accurate? what are you talking about?
Jerry

Playback Issues with multiple framerates and Blackmagic Decklink 4K Extreme

I recently swapped by AJA Kona Card for a Blackmagic Decklink 4K Extreme in order to get external monitoring in DaVinci Resolve.
I'm working in a 1080p 23.976 project that includes some 29.97 SD and HD footage. When loading this 29.97fps footage into my source footage, I periodically encounter frozen playback (The play triangle in my toolbar becomes a square symbol and remains that way). From there I am unable to playback any footage in any timeline, and requires a full system shutdown to return to normal! The problem is seemingly intermitent, with successful playback happening sometimes.
The 29.97 footage was DVCPRO, I attempted to transcode to Prores to troubleshoot. No dice. I believe it to be an issue related to the Decklink's inability to handle multiple framerates on-the-fly but wanted to submit here, too. I've also experienced intermittent sync delays on my broadcast monitor.
Decklink Driver 10.0
Premiere CC 7.2.1
Mac OSX 10.9.2 (same problem pre-mavericks)

Hi Andy,
You should not have any issues with Blackmagic handling multiple formats on the fly. However, I believe the frozen playback issues your describing is related to the Desktop Video 10 driver. I suggest rolling back to 9.3.3 for the time being. Blackmagic is looking into this issue now.
Best,
Peter Garaway
Adobe
Premiere Pro

ITunes 10.6/Quicktime 7 1080p playback issue/frame skipping

I have a playback issue with the 1080p videos on the recent version of iTunes - 10.6. I also tried playing the same videos on Quicktime where I was able to find that the videos were playing at around 20fps as opposed to their normal rate - 24fps~25fps.
I seem to barely meet the 1080p playback requirements on iTunes, but I know that I'm able to watch 1080p videos on Window Media Player(WMP) 12 without any issues. Aside from WMP, I'm able to watch 1080p videos on Youtube whenever hardware acceleration is enabled. I assume that WMP utilizes hardware acceleration as well.
The playback issue/frame skipping is probably caused by iTunes 10.6 not using hardware acceleration.
Windows Hardware
PC with a 1GHz Intel or AMD processor and 512MB of RAM
To play Standard Definition video from the iTunes Store, an Intel Pentium D or faster processor, 512MB of RAM, and a DirectX 9.0-compatible video card is required
To play 720p HD video, an iTunes LP, or iTunes Extras, a 2.0GHz Intel Core 2 Duo or faster processor, 1GB of RAM, and an Intel GMA X3000, ATI Radeon X1300, or NVIDIA GeForce 6150 or better is required
To play 1080p HD video, a 2.4GHz Intel Core 2 Duo or faster processor, 2GB of RAM, and an Intel GMA X4500HD; ATI Radeon HD 2400; Nvidia GeForce 8300 GS or better is required
Screen resolution of 1024x768 or greater; 1280x800 or greater is required to play an iTunes LP or iTunes Extras
16-bit sound card and speakers
Broadband Internet connection to use the iTunes Store
iTunes-compatible CD or DVD recorder to create audio CDs, MP3 CDs, or back-up CDs or DVDs
My PC specs:
Pentium Dual Core 2.3 Ghz
2GB DDR3
Intel GMA X4500MHD

Bump! Sounds the same as my problem, but maybe no one but us are having the issue since no one will answer any of my posts

WINDOWS VISTA ITUNES VIDEO PLAYBACK ISSUE!!!!!! AAHHHHHHH!!! HELP!!!!!!!!!!

am using a Dell XPS GEN 5 PC with Windows Vista Premium Edition as the current OS installed. I have latested up date for Itunes and QuickTime (7.1.6) Installed. I have recently bought and downloaded 3 of the Original Star Trek Tv Shows from Itunes. When I try and play one of them, they don't work. The Screen comes up, the show starts, then stops. Sometimes the sound keeps on playing, and then stops. Sometimes it just dosent even come on. I'm guessing (as a highly advanced Windows PC User) That this ia a "video/playback issue, related to a Apple/Vista Compatibility problem. I would like help solving this problem.

hi slideaway!
my computer has a right proper meltdown, switching itself off and restarting to a "Windows has recovered from a serious error" sort of message.
good lord. are you getting any sort of blue screen? if so, what numerical and text codes are you getting with it? (ie 0x[zeros/letters/numbers] CAPSANDUNDERSCORES)
here's a reference on the sorts of things i'm asking about:
Troubleshooting Windows Stop Messages
if you're not seeing a blue screen (or just a flash of one), we can use this technique to make hidden blue screens appear for us:
1) Open your system control panel (Start->Control Panels->System).
2) Select the "Advanced" tab.
3) Click the "Startup and Recover" section's "Settings" button
4) Verify that under "System Failure" the "Automatically restart" checkbox is not checked.
love, b

ICanon C100 playback issue premiere pro cc 2014

I am having playback issues in Premiere Pro CC 2014 with footage shot on my Canon C100 (29.97 fps). It was happening after doing a straight import and creating a sequence using "new item". Then, after reading some other threads here and elsewhere, I interpreted the footage so premiere would see it as progressive (no fields) rather than interlaced, but that doe not seem to help. It is even doing it when I play at 1/4 resolution. The only solution seems to be to quit and restart and reopen the project. Then it works temporarily for a little while but not long enough to actually edit. I have done projects in Premiere with C100 footage in the past and have not experience this level of difficulty.
My Media Cache is not going to the startup diskc(it is gong to the right place)
I am on a Mac 2.66 Ghz Quad-Core Intel Xeon
OS X 10.8.5
10GB 1066 MHz DDR3
NVIDIA GeForce GT 120 512 MB
Please help - very frustrated. If the solution is to transcode, it sort of kills the value of premiere in many ways.

Hi,
This might help :
Go to File > Project Settings > General and change the Video Renderer to Mercury Playback Engine software only. Click OK and select Delete Previews.
Thanks,
Rameez

Video playback issues in Air for Android

Hello everybody
I am developing an advertisement application which plays multiple videos. I have faced a very strange problem: nor the simple Video nor the StageVideo are not visible when I run the app on target android device. I can hear the audio but the only way to get the video is to press back button and then get back to app but in this case the video goes over the UI. This happens only on a target device which is a chinese sibo android tablet. It has android 4.1 on board. I have seen a lot of people had the similar issues:
http://forums.adobe.com/message/5429125
but the solution mentioned there - adding <containsVideo>true</containsVideo> to the manifest xml doesnt help
I am using adobe air 4.0 sdk and the air 4.0 runtime on the device. I have tried to change renderMode to CPU/Direct/Auto but it doesn change anything.
The other three android devices I have - toshiba thrive tablet(4.0.4)/ eken tablet(4.2.2)/ htc desire c(4.0.3) play all the video content without any problem.
Any advice will be highly appreciated,
Max

Hi, Chris,
I think this issue: Bug#3832525 - [Android] Video + Stage3D = Video don't work but sound continue playback
Also there is many critical video playback issues:
Bug#3759420 - [Platform_Windows] GPU accelerated video stop playing when screen resolution changes after NetStream.Buffe…
Bug#3810201 - [Android] H.264 video rotating problem
Bug#3503389 - [Platform_Android]StageVideo attachCamera()
Bug#3802932 - [iOS] Video stops playing
Bug#3840986 - [iOS] Simple Video object doesn't work with H.264 (MP4) videos
Bug#3779843 - StageVideo + NetStream + Starling = R6025 Error
Bug#3626740 - H.264 playback conflicts with Stage3D (Android)
Bug#3832327 - [Android] NetStream decodedFrames don't work
Bug#3832141 - Video is not working if you seek on NetStream.Play.Stop and have a bufferTime
Bug#3810979 - AIR on iOS: Using StageVideo makes 2D Display objects opaque/black over Stage3D
Bug#3578045 - new Video() android black screen
Bug#3703836 - Black screen on Samsung Galaxy S4 and Nexus 7 device
Bug#3837870 - [iOS] StageVideo + Stage3D = video not displaying but sound playback
Bug#3840983 - [Android] Returning from Alarm Clock causes black screen when using Video with GPU acceleration
Bug#3840999 - [iOS] [Android] Turn off screen at NetStream.Buffer.Flush causes video not work or crash with some videos
Bug#3844059 - [iOS[ Switching between multiple NetStreams not work
Bug#3773944 - Video view top at android 4.3
and more
All of these problems very important for our business. Often we cannot create stable AIR applications when we need to use videos.
Could you force for faster fixing these issues?

Playback issues - squishing in Premiere CC

Hey All,
So I've run into this problem a couple of times. In the past, it has just sort of fixed itself, but now I'm having it again and want to know how I can fix it. I have a sequence that's been edited and rendered, however, during playback, the image gets squished in the playback window. If I stop playback, the image returns to normal (1920x1080 in this case). I found in past sequences that if I turn off my transparent layer that includes timecode, usually the playback is fixed. That is not the case with my current sequence though. Below is a screenshot of the playback issue along with my sequence settings:
I've noticed that if I take away any effects, like color correction or cross dissolves, and return the footage to it's "raw" form, playback will work fine. Obviously, that can't be done though...since I have dissolves and slides and whatnot involved with the cut. In the screenshot above, the cafe picture is composed of 3 layers (via Photoshop) on top of the video clip. I have also tried deleting all of my render files and restarting Premiere.
I'm working on a Mac (10.7.5) out of Premiere CC
Any help would be GREATLY appreciated.
Thanks guys!
Hugo

Exactly what version of PPro CC are you on? If you're on CC7.1, then you're probably hitting the issue discussed in this thread: http://forums.adobe.com/message/5828335?tstart=30#5828335. That issue (which was specific to playback resolution being set to 1/4) was fixed in 7.2.

[bug?] playback issues with QT browser plugin, any workarounds?

I've noticed a playback issue with media files using the quicktime plugin (currently v7.1.3) with Firefox 1.5.0.x and now Firefox 2.0 on Windows XP (SP2):
Description:
When I open a media file in a separate tab or window, audio playback cuts out when I switch focus away from the tab or window (i.e. when it runs in the background). When I put the tab/window in the foreground again, playing resumes.
Reproducible: Always
Steps to Reproduce:
1. Open an mp3 file with quicktime plugin in a new tab
2. Switch focus to some other tab or firefox window
Expected Results:
Audio playback should continue in the background.
Actual Results:
Audio playback cuts out and resumes once you click on the tab containing the plugin or if you hover over it with the cursor. The cutting and resuming out doesn't happen right away but after a short delay, suggesting that it might have something to do with thread prioritization.
The file is completely buffered by quicktime, this is not about connection speed or bandwidth issues.
Opening the link to the same file with right-click->Open Link in External Application works well.
Someone else has filed a bug report against Firefox about this issue here:
https://bugzilla.mozilla.org/show_bug.cgi?id=339449
I wouldn't be surprised if this turns out not to be an issue with Gecko but with QuickTime.
Can other users confirm this on XP? Is this a known QuickTime bug? Are there fixes or workarounds?
Windows XP

Yeah I had that thought as well but no joy. It works for the player but it doesn't solve my plugin problem. It really seems to be something about prioritizing, the way the audio cuts in and out - notice how it takes a few fractions of a second before a process loses its CPU cycles when you click away from it? You can observe this with System Monitor on the Mac or Linux or process explorer on XP. That's how the audio is cutting out and back in. I still think it's probably a bug/'feature' either with Gecko, the Firefox browser engine, or with the QT plugin..

Yeti Mic & Playback issues - CS5

Similar Messages

Maybe you are looking for