Yikes, this is taking long to render.

Let me start by saying that I've never edited long format in FCP. I'm currently rendering out a 2hr 2min feature for use in DVD Studio Pro. The settings are SD, 636x480. (It's an old movie). I used the share dialogue in FCP to DVD. It currently says the render time will be approx. 36hrs. Is this normal or is it recommended I export via compressor and adjust the settings myself? Is there a faster method without sacrificing quality?
Thank you in advanced for help.

Assuming you are intending to build the DVD in DVD Studio Pro, you should be making an MPEG2 video file and an ac3 audio file. Making H264 will take a long time and is completely unneccessary.
If you are going to build the disc in iDVD, then you export a Self Contained QuickTime file using Current Settings (same as your Timeline).
But let's just back up a little here.
Go back to your source file. What codec does it use?
What are the Sequence Settings in Final Cut Pro? Do they match the codec of your source file?

Similar Messages

  • Motion 4 (upgrade) Templates Taking Longer to Render in FCP?

    I've noticed that templates created in the Motion 4 upgrade when used in FinalCut -- more specifically those with text -- take much longer to render... in fact, up to 10x longer.
    I have text-only templates used for the lower-third, after trying to figure out why a 10-second sequence was taking 12 minutes to render in FCP, I removed the video-track containing the Motion template, which result in a render-time of about 20 seconds.
    Using a very-similar text-only template from Motion 3 (created before the upgrade) resulted in a negligible increase in render time. So I opened the .motn file in the upgraded Motion 4, exported as a new template... and the render-time jumped back to 12 minutes. Same text, same transition, but the Motion 4 created template significantly increased render-time in FCP.
    Is anyone else seeing this? And is there a solution/fix/workaround?

    I want to use some Motion-designed templates for some specific text transitions (nothing too crazy, but which is much more simple to use in a template, for a regally occurring webisode project) in a lower-third.
    A 20 second clip with a "Text-A template" saved from Motion 3, takes less than one minute to render in FCP.
    The same clip, with the same "Text-A template" saved from Motion 4, takes nearly six minutes to render in FCP... with the same render settings.
    It appears to be only related to templates that contain text... I've not noticed any new slowness with templates that contain drop-zones for photos or video.

  • MP-4 Takes Unusually long to Render: Is this format the worst to render?

    I usually do my projects from my canon camera and the rendering of clips occurr very quickly. I just brought in some MP4 clips and they are taking 15 minutes or so to render a 1 minute clip. Is this format unusually long to render? I use streamclip to make some short clips and options to make them as avi as well as others. Should I consider doing this rather than as an mp4?
    Thanks so much for any assistance someone can give.
    Skip
    PS: Have they fixed the solve helpful buttons yet????

    MPEG-4 is not an edititng codec....it is a delivery codec. And yeah, it will take a while to render.
    If you use Streamclip, you need to convert it to DV/NTSC in order to work with it properly. NOT AVI!
    Shane

  • This part of query is taking long time to run, its about 40 minutes. Can anyone help wit it.

    ------Load Dataset into Temp table---------------
    SELECT
    z.SYSTEMNAME
    --,Case when ZXC.[Subsystem Name] <> 'NULL' Then zxc.[SubSystem Name]
    --else NULL
    --End AS SubSystemName
    , CASE
    WHEN z.PROV_TAX_ID IN
    (SELECT DISTINCT zxc.TIN
    FROM dbo.SQS_Provider_Tracking zxc
    WHERE zxc.[SubSystem Name] <> 'NULL'
    THEN
    (SELECT DISTINCT [Subsystem Name]
    FROM dbo.SQS_Provider_Tracking zxc
    WHERE z.PROV_TAX_ID = zxc.TIN)
    End As SubSYSTEMNAME
    ,z.PROVIDERNAME
    ,z.STATECODE
    ,z.PROV_TAX_ID
    ,z.SRC_PAR_CD
    ,SUM(z.SEQUEST_AMT) Actual_Sequestered_Amt
    , CASE
    WHEN z.SRC_PAR_CD IN ('E','O','S','W')
    THEN 'Nonpar Waiver'
    --**Amendment Mailed**
    --WHEN z.PROV_TAX_ID IN
    When EXISTS
    (SELECT DISTINCT b.PROV_TIN
    FROM dbo.SQS_Mailed_TINs_010614 b WITH (NOLOCK )
    where not exists (select * from dbo.sqs_objector_TINs t where b.PROV_TIN = t.prov_tin))
    THEN
    (SELECT DISTINCT b.Mailing
    FROM dbo.SQS_Mailed_TINs_010614 b WITH (NOLOCK )
    WHERE z.PROV_TAX_ID = b.PROV_TIN
    -- --**Amendment Mailed Wave 3 and 4**
    --WHEN z.PROV_TAX_ID In
    When EXISTS
    (SELECT
    qz.PROV_TIN
    FROM
    [SQS_Mailed_TINs] qz WITH (NOLOCK )
    where qz.Mailing = 'Amendment Mailed (3rd Wave)'
    and not exists (select * from dbo.sqs_objector_TINs t WITH (NOLOCK ) where qz.PROV_TIN = t.prov_tin))
    THEN 'Amendment Mailed (3rd Wave)'
    WHEN EXISTS
    (SELECT
    qz.PROV_TIN
    FROM
    [SQS_Mailed_TINs] qz WITH (NOLOCK )
    where qz.Mailing = 'Amendment Mailed (4th Wave)'
    and not exists (select * from dbo.sqs_objector_TINs t WITH (NOLOCK ) where qz.PROV_TIN = t.prov_tin))
    THEN 'Amendment Mailed (4th Wave)'
    -- --Is Puerto Rico of Lifesynch
    WHEN EXISTS
    (SELECT DISTINCT a.PROV_TAX_ID
    FROM PACT.dbo.SQS_NonPar_PR_LS_TINs a WITH (NOLOCK )
    WHERE a.Bucket <> 'Nonpar'
    THEN
    (SELECT DISTINCT a.Bucket
    FROM PACT.dbo.SQS_NonPar_PR_LS_TINs a WITH (NOLOCK )
    WHERE a.PROV_TAX_ID = z.PROV_TAX_ID)
    -- --**Top Objecting Systems**
    WHEN z.SYSTEMNAME IN
    ('ADVENTIST HEALTH SYSTEM','ASCENSION HEALTH ALLIANCE','AULTMAN HEALTH FOUNDATION','BANNER HEALTH SYSTEM','BERT FISH MEDICAL CENTER','BETHESDA MEMORIAL HOSPITAL','BJC HEALTHCARE','BLOUNT MEMORIAL HOSPITAL','BOCA RATON REGIONAL HOSPITAL','CAROMONT HEALTH SYSTEM','CATHOLIC HEALTH INITIATIVES','CATHOLIC HEALTHCARE PARTNERS','CHRISTUS HEALTH',/*'CLEVELAND CLINIC HEALTH SYSTEM',*/'COLUMBUS REGIONAL HEALTHCARE SYSTEM','COMMUNITY HEALTH SYSTEMS, INC','COXHEALTH','HCA','HEALTH MANAGEMENT ASSOCIATES','HUNTSVILLE HOSPITAL HEALTH SYSTEM','INTEGRIS HEALTH','JUPITER MEDICAL CENTER','LEE MEMORIAL HEALTH SYSTEM','MARTIN MEMORIAL HEALTH SYSTEM','MERCY','MT SINAI MEDICAL CENTER (MIAMI)','MUNROE REGIONAL MEDICAL CENTER','NORMAN REGIONAL HEALTH SYSTEM','NORTHSIDE HEALTH SYSTEM','SHANDS HEALTHCARE','SISTERS OF MERCY - SPRINGFIELD, MO','SSM HEALTH CARE','ST LUKES HEALTH SYSTEM','SUMMA HEALTH SYSTEM','SUSQUEHANNA HEALTH SYSTEM','TBD -- TRINITY HEALTH - CATHOLIC HEALTH EAST','UNIVERSITY OF MISSOURI HEALTH SYSTEM','UNIVERSITY OF NEW MEXICO HOSPITALS','UNIVERSITY OF UTAH HEALTH CARE')
    THEN 'Top Objecting Systems'
    WHEN EXISTS
    (SELECT
    h.PROV_TAX_ID
    FROM
    #HIHO_Records h
    INNER JOIN SQS_Provider_Tracking obj WITH (NOLOCK )
    ON h.PROV_TAX_ID = obj.TIN
    AND obj.[Objector?] = 'Top Objector'
    WHERE z.PROV_TAX_ID = h.PROV_TAX_ID
    OR h.SMG_ID IS NOT NULL
    )and z.LCLM_RSTMT_TREND_CAT_CD IN ('HO','HI')
    THEN 'Top Objecting Systems'
    -- --**Other Objecting Hospitals**
    WHEN EXISTS
    (SELECT
    h.PROV_TAX_ID
    FROM
    #HIHO_Records h
    INNER JOIN SQS_Provider_Tracking obj WITH (NOLOCK )
    ON h.PROV_TAX_ID = obj.TIN
    AND obj.[Objector?] = 'Objector'
    WHERE z.PROV_TAX_ID = h.PROV_TAX_ID
    OR h.SMG_ID IS NOT NULL
    )and z.LCLM_RSTMT_TREND_CAT_CD IN ('HO','HI')
    THEN 'Other Objecting Hospitals'
    -- --**Objecting Physicians**
    WHEN EXISTS
    (SELECT z.PROV_TAX_ID
    FROM SQS_EDW_Source z WITH (NOLOCK)
    WHERE EXISTS
    (SELECT DISTINCT
    obj.TIN
    FROM SQS_Provider_Tracking obj WITH (NOLOCK )
    WHERE obj.[Objector?] in ('Objector','Top Objector')
    and z.PROV_TAX_ID = obj.TIN
    and z.LCLM_RSTMT_TREND_CAT_CD not IN ('HO','HI')
    THEN 'Objecting Physicians'
    --****Rejecting Hospitals****
    WHEN EXISTS
    (SELECT
    h.PROV_TAX_ID
    FROM
    #HIHO_Records h
    INNER JOIN SQS_Provider_Tracking obj WITH (NOLOCK )
    ON h.PROV_TAX_ID = obj.TIN
    AND obj.[Objector?] = 'Rejector'
    WHERE z.PROV_TAX_ID = h.PROV_TAX_ID
    OR h.SMG_ID IS NOT NULL
    )and z.LCLM_RSTMT_TREND_CAT_CD IN ('HO','HI')
    THEN 'Rejecting Hospitals'
    --****Rejecting Physciains****
    WHEN EXISTS
    (SELECT obj.TIN
    FROM SQS_Provider_Tracking obj WITH (NOLOCK )
    WHERE z.PROV_TAX_ID = obj.TIN
    AND obj.[Objector?] = 'Rejector')
    and z.LCLM_RSTMT_TREND_CAT_CD NOT IN ('HO','HI')
    THEN 'REjecting Physicians'
    ----**********ALL OBJECTORS SHOULD HAVE BEEN BUCKETED AT THIS POINT IN THE QUERY**********
    -- --**Non-Objecting Hospitals**
    WHEN EXISTS
    (SELECT DISTINCT
    h.PROV_TAX_ID
    FROM
    #HIHO_Records h WITH (NOLOCK )
    WHERE
    (z.PROV_TAX_ID = h.PROV_TAX_ID)
    OR h.SMG_ID IS NOT NULL
    )and z.LCLM_RSTMT_TREND_CAT_CD IN ('HO','HI')
    THEN 'Non-Objecting Hospitals'
    -- **Outstanding Contracts for Review**
    WHEN EXISTS
    (SELECT qz.PROV_TIN
    FROM
    [PACT].[HUMAD\ARS3766].[SQS_Mailed_TINs] qz WITH (NOLOCK )
    where qz.Mailing = 'Non-Objecting Bilateral Physicians'
    AND z.PROV_TAX_ID = qz.PROV_TIN)
    Then 'Non-Objecting Bilateral Physicians'
    When EXISTS
    (select
    p.prov_tax_id
    from dbo.SQS_CoC_Potential_Mail_List p WITH (NOLOCK )
    where p.amendmentrights <> 'Unilateral'
    AND z.prov_tax_id = p.prov_tax_id)
    THEN 'Non-Objecting Bilateral Physicians'
    WHEN EXISTS
    (SELECT
    qz.PROV_TIN
    FROM
    [SQS_Mailed_TINs] qz WITH (NOLOCK )
    where qz.Mailing = 'More Research Needed'
    AND qz.PROV_TIN = z.PROV_TAX_ID)
    THEN 'More Research Needed'
    WHEN EXISTS (SELECT qz.PROV_TIN FROM [SQS_Mailed_TINs] qz WITH (NOLOCK ) where qz.Mailing = 'Objector' AND qz.PROV_TIN = z.PROV_TAX_ID)
    THEN 'ERROR'
    else 'Market Review/Preparing to Mail'
    END AS [Updated Bucket]
    ,COALESCE(q.INDdesc, f.IND_desc) AS INDdesc
    ,f.Time_Period_for_Dispute
    ,f.Renew_Term_Ind
    ,f.Renewal_Date
    ,z.SMG_ID
    ,'' AS OrderedRank
    INTO SQS_Bucketed_Details_SMG_on_SMGXXX
    From #SQS_EDW_SOURCE_WithSMG z
    left join #F f ON f.PROV_TAX_ID = z.PROV_TAX_ID
    AND z.SYSTEMNAME = f.SYSTEM_NAME
    AND z.PROVIDERNAME = f.Provider
    Left join #Q q ON z.PROV_TAX_ID = q.TIN
    GROUP BY z.SYSTEMNAME
    --,Z.[SubsystemName]
    ,z.PROVIDERNAME
    ,z.STATECODE
    ,z.PROV_TAX_ID
    ,z.SRC_PAR_CD
    ,q.INDdesc
    ,f.IND_Desc
    ,f.Time_Period_for_Dispute
    ,f.Renew_Term_Ind
    ,f.Renewal_Date
    ,z.SMG_ID
    ,z.LCLM_RSTMT_TREND_CAT_CD
    As I am a developer I do not have the access to Sql profiler or tuning agent to optimize my query, I have used some joins over the temp table #HIHO which indeed pulling the records from table EDW_Source which has 5 million records, I also added Non clustered
    indexes on prov_ID, SMG_ID and Incurred month for this table, but still it is taking longer time. Need help

    Hi, It needs some more tweaks but pls try this one
    USE
    Go
    --****Create sqs_objector_TINs (Objections and Rejections)****
    --Drop table .dbo.sqs_objector_TINs
    select distinct a.TIN as Prov_TIN
    Into #sqs_objector_TINs
    from .dbo.sqs_provider_tracking as a with (nolock)
    where a.[Objector?] in ('Top Objector','Objector','Rejector')
    /*********** Query for SQS_TINtoSyst***********/
    --DROP TABLE .dbo.SQS_TINtoSystem
    select distinct
    b.SRC_PROV_ID
    --,case
    -- when a.SYSTEM_NAME is null
    -- then
    -- case
    -- when a.CTRCT_GRP_NAME is null
    -- then a.PROV_SMG_NAME
    -- else a.CTRCT_GRP_NAME
    -- end
    -- else a.SYSTEM_NAME
    --end as SYSTEM_NAME
    ,COALESCE(a.SYSTEM_NAME, a.CTRCT_GRP_NAME, a.PROV_SMG_NAME) AS SYSTEM_NAME
    INTO #SQS_TINtoSystem
    from
    PARE.dbo.EDW_PROD_HOSPITAL_MASTER a with (nolock)
    Inner Join PARE.dbo.EDW_PROD_HOSPITAL_ID_XREF b with (nolock)
    on a.SMG_ID = b.SMG_ID
    -- Inner Join .dbo.SQS_EDW_Source q
    --on b.SRC_PROV_ID = q.PROV_TAX_ID
    where b.SRC_PLATFORM_CD = 'TX'
    and exists
    select
    SMG_ID
    from PARE.dbo.EDW_PROD_HOSPITAL_ID_XREF as t1 with (nolock)
    where SRC_PLATFORM_CD = 'TX'
    and exists (select q.PROV_TAX_ID from .dbo.SQS_EDW_Source q with (nolock) where q.PROV_TAX_ID = b.SRC_PROV_ID)
    and a.SMG_ID = t1.SMG_ID
    /************** Query for SQS_Bucketed_Details_SMG*****************/
    DROP TABLE .dbo.SQS_Bucketed_Details_SMG
    --Create temp table
    SELECT z.SYSTEMNAME
    ,Z.PROV_TAX_ID
    ,z.PROVIDERNAME
    ,z.STATECODE
    ,z.SRC_PAR_CD
    ,z.SEQUEST_AMT
    ,case when Z.LCLM_RSTMT_TREND_CAT_CD IN ('HI','HO') Then 'H' else 'P' end as Hosp_Ind
    ,Z.SMG_ID
    INTO #SQS_EDW_SOURCE_WithSMG
    FROM dbo.SQS_EDW_SOURCE_WithSMG z with (nolock)
    WHERE (Z.Incurred_Mth >= convert(datetime,'01/01/2013')) and (Z.Incurred_Mth < convert(datetime, '1/1/2014'))
    --between convert(datetime,'01/01/2013') and convert(datetime, '12/31/2013 23:59:59.996')
    --YEAR(Z.Incurred_Mth)=2013
    -- Create Temp table Q
    select
    x.TIN,
    case when max(x.IND) = 'NYN'
    then 'Standard'
    when max(x.IND) = 'YNN'
    then 'Express'
    when max(x.IND) = 'NNY'
    then 'Non_Standard' else 'Mixed'
    end as INDdesc
    Into #Q
    FROM
    (SELECT
    a.tin,
    MAX(a.express) + MAX(a.StandardInd) + MAX(NonstandardIND) as IND
    from
    (select r.TIN,
    case when MAX(r.Express) like 'Y%' then 'Y' else 'N' end As Express,
    case when MAX(r.Standard) = 'Y' then 'Y' else 'N' end As StandardInd,
    case when MAX(r.[Non-Standard]) = 'Y' then 'Y' else 'N' end AS NonstandardIND
    FROM DBO.SQS_Objectors_01032014 r with (nolock)
    GROUP BY r.TIN) a
    group by a.TIN) x
    group by x.TIN
    --Create Temp table F
    Select *
    INTO #F
    FROM(
    SELECT distinct g.prov_tax_id
    ,g.system_name
    ,g.provider
    ,case when g.reimburse_mixed = 'Y' then 'Mixed'
    when g.reimburse_express = 'Y' then 'Express'
    when g.reimburse_standard = 'Y' then 'Standard'
    when g.reimburse_NonStandard = 'Y' then 'NonStandard'
    end as IND_Desc
    ,g.Time_Period_for_Dispute
    ,case when g.Renewal_Date = 'N' and g.Expiration_Date = 'N'
    then 'Unclear'
    when g.Renewal_Date = 'N' and g.Expiration_Date <> 'N'
    then 'Termination'
    when g.Renewal_Date <> 'N' and g.Expiration_Date = 'N'
    then 'Evergreen'
    when g.Renewal_Date <> 'N' and g.Expiration_Date <> 'N'
    then 'Termination'
    else 'Unknown'
    end as 'Renew_Term_Ind'
    ,g.Renewal_Date
    FROM
    (select distinct
    bb.PROV_TAX_ID1 as prov_tax_id
    ,aa.*
    from
    [dbo].[Top_600_Hospitals3] aa with (nolock)
    left join pare.dbo.EDW_PROD_HOSPITAL_MASTER bb with (nolock)
    on --a.CTRCT_GRP_NAME = b.CTRCT_GRP_NAME
    aa.Provider = bb.PROV_SMG_NAME
    -- and (a.SYSTEM_NAME = b.SMG_SYS_NAME or a.SYSTEM_NAME = b.SYSTEM_NAME)
    --and a.ADDR_LINE1 = b.ADDR_LINE1
    and aa.STATE_CD = bb.STATE_CD
    --and a.ZIP_CD = b.ZIP_CD
    and aa.City1 = bb.CITY_NAME
    where aa.SYSTEM_NAME <> 'SEE ABOVE') g
    where g.system_name <> 'SEE ABOVE') h
    where h.ind_Desc is not null
    SELECT DISTINCT z.PROV_TAX_ID
    , z.SMG_ID
    INTO #HIHO_Records
    FROM SQS_EDW_SOURCE_WithSMG z with (nolock)
    WHERE z.LCLM_RSTMT_TREND_CAT_CD IN ('HO', 'HI')
    AND Z.Incurred_Mth >=convert(datetime, '1/1/2013') and Z.Incurred_Mth <convert(datetime, '1/1/2014')
    --YEAR(Z.Incurred_Mth)=2013
    ---------------------------------Load Dataset into Temp table---------------
    SELECT
    z.SYSTEMNAME
    --,Case when ZXC.[Subsystem Name] <> 'NULL' Then zxc.[SubSystem Name]
    --else NULL
    --End AS SubSystemName
    , CASE
    WHEN z.PROV_TAX_ID IN
    (SELECT zxc.TIN
    FROM dbo.SQS_Provider_Tracking zxc with (nolock)
    WHERE zxc.[SubSystem Name] <> 'NULL'
    THEN
    (SELECT top 1 [Subsystem Name]
    FROM dbo.SQS_Provider_Tracking zxc with (nolock)
    WHERE z.PROV_TAX_ID = zxc.TIN)
    End As SubSYSTEMNAME
    ,z.PROVIDERNAME
    ,z.STATECODE
    ,z.PROV_TAX_ID
    ,z.SRC_PAR_CD
    ,SUM(z.SEQUEST_AMT) Actual_Sequestered_Amt
    , CASE
    WHEN z.SRC_PAR_CD IN ('E','O','S','W')
    THEN 'Nonpar Waiver'
    -- --Is Puerto Rico of Lifesynch
    WHEN z.PROV_TAX_ID IN
    (SELECT a.PROV_TAX_ID
    FROM .dbo.SQS_NonPar_PR_LS_TINs a with (nolock)
    WHERE a.Bucket <> 'Nonpar'
    THEN
    (SELECT top 1 a.Bucket
    FROM .dbo.SQS_NonPar_PR_LS_TINs a with (nolock)
    WHERE a.PROV_TAX_ID = z.PROV_TAX_ID)
    --**Amendment Mailed**
    WHEN z.PROV_TAX_ID IN
    (SELECT b.PROV_TIN
    FROM dbo.SQS_Mailed_TINs_010614 b WITH (NOLOCK )
    where not exists (select * from dbo.sqs_objector_TINs t with (nolock) where b.PROV_TIN = t.prov_tin))
    and z.Hosp_Ind = 'P'
    THEN
    (SELECT top 1 b.Mailing
    FROM dbo.SQS_Mailed_TINs_010614 b with (nolock)
    WHERE z.PROV_TAX_ID = b.PROV_TIN
    -- --**Amendment Mailed Wave 3-5**
    WHEN z.PROV_TAX_ID In
    (SELECT
    qz.PROV_TIN
    FROM
    [SQS_Mailed_TINs] qz
    where qz.Mailing = 'Amendment Mailed (3rd Wave)'
    and not exists (select * from dbo.sqs_objector_TINs t with (nolock) where qz.PROV_TIN = t.prov_tin))
    and z.Hosp_Ind = 'P'
    THEN 'Amendment Mailed (3rd Wave)'
    WHEN z.PROV_TAX_ID IN
    (SELECT
    qz.PROV_TIN
    FROM
    [SQS_Mailed_TINs] qz
    where qz.Mailing = 'Amendment Mailed (4th Wave)'
    and not exists (select * from dbo.sqs_objector_TINs t with (nolock) where qz.PROV_TIN = t.prov_tin))
    and z.Hosp_Ind = 'P'
    THEN 'Amendment Mailed (4th Wave)'
    WHEN z.PROV_TAX_ID IN
    (SELECT
    qz.PROV_TIN
    FROM
    [SQS_Mailed_TINs] qz
    where qz.Mailing = 'Amendment Mailed (5th Wave)'
    and not exists (select * from dbo.sqs_objector_TINs t with (nolock) where qz.PROV_TIN = t.prov_tin))
    and z.Hosp_Ind = 'P'
    THEN 'Amendment Mailed (5th Wave)'
    -- --**Top Objecting Systems**
    WHEN z.SYSTEMNAME IN
    ('ADVENTIST HEALTH SYSTEM','ASCENSION HEALTH ALLIANCE','AULTMAN HEALTH FOUNDATION')
    THEN 'Top Objecting Systems'
    WHEN z.PROV_TAX_ID IN
    (SELECT
    h.PROV_TAX_ID
    FROM
    #HIHO_Records h
    INNER JOIN .dbo.SQS_Provider_Tracking obj with (nolock)
    ON h.PROV_TAX_ID = obj.TIN
    AND obj.[Objector?] = 'Top Objector'
    WHERE z.PROV_TAX_ID = h.PROV_TAX_ID
    OR h.SMG_ID IS NOT NULL
    )and z.Hosp_Ind = 'H'
    THEN 'Top Objecting Systems'
    -- --**Other Objecting Hospitals**
    WHEN (z.PROV_TAX_ID IN
    (SELECT
    h.PROV_TAX_ID
    FROM
    #HIHO_Records h
    INNER JOIN .dbo.SQS_Provider_Tracking obj with (nolock)
    ON h.PROV_TAX_ID = obj.TIN
    AND obj.[Objector?] = 'Objector'
    WHERE z.PROV_TAX_ID = h.PROV_TAX_ID
    OR h.SMG_ID IS NOT NULL
    )and z.Hosp_Ind = 'H')
    THEN 'Other Objecting Hospitals'
    -- --**Objecting Physicians**
    WHEN (z.PROV_TAX_ID IN
    (SELECT
    obj.TIN
    FROM .dbo.SQS_Provider_Tracking obj with (nolock)
    WHERE obj.[Objector?] in ('Objector','Top Objector')
    and z.PROV_TAX_ID = obj.TIN
    and z.Hosp_Ind = 'P')
    THEN 'Objecting Physicians'
    --****Rejecting Hospitals****
    WHEN (z.PROV_TAX_ID IN
    (SELECT
    h.PROV_TAX_ID
    FROM
    #HIHO_Records h
    INNER JOIN .dbo.SQS_Provider_Tracking obj with (nolock)
    ON h.PROV_TAX_ID = obj.TIN
    AND obj.[Objector?] = 'Rejector'
    WHERE z.PROV_TAX_ID = h.PROV_TAX_ID
    OR h.SMG_ID IS NOT NULL
    )and z.Hosp_Ind = 'H')
    THEN 'Rejecting Hospitals'
    --****Rejecting Physciains****
    WHEN
    (z.PROV_TAX_ID IN
    (SELECT
    obj.TIN
    FROM .dbo.SQS_Provider_Tracking obj with (nolock)
    WHERE z.PROV_TAX_ID = obj.TIN
    AND obj.[Objector?] = 'Rejector')
    and z.Hosp_Ind = 'P')
    THEN 'REjecting Physicians'
    ----**********ALL OBJECTORS SHOULD HAVE BEEN BUCKETED AT THIS POINT IN THE QUERY**********
    -- --**Non-Objecting Hospitals**
    WHEN z.PROV_TAX_ID IN
    (SELECT
    h.PROV_TAX_ID
    FROM
    #HIHO_Records h
    WHERE
    (z.PROV_TAX_ID = h.PROV_TAX_ID)
    OR h.SMG_ID IS NOT NULL)
    and z.Hosp_Ind = 'H'
    THEN 'Non-Objecting Hospitals'
    -- **Outstanding Contracts for Review**
    WHEN z.PROV_TAX_ID IN
    (SELECT
    qz.PROV_TIN
    FROM
    [SQS_Mailed_TINs] qz with (nolock)
    where qz.Mailing = 'Non-Objecting Bilateral Physicians'
    AND z.PROV_TAX_ID = qz.PROV_TIN)
    Then 'Non-Objecting Bilateral Physicians'
    When z.prov_tax_id in
    (select
    p.prov_tax_id
    from dbo.SQS_CoC_Potential_Mail_List p with (nolock)
    where p.amendmentrights <> 'Unilateral'
    AND z.prov_tax_id = p.prov_tax_id)
    THEN 'Non-Objecting Bilateral Physicians'
    WHEN z.PROV_TAX_ID IN
    (SELECT
    qz.PROV_TIN
    FROM
    [SQS_Mailed_TINs] qz
    where qz.Mailing = 'More Research Needed'
    AND qz.PROV_TIN = z.PROV_TAX_ID)
    THEN 'More Research Needed'
    WHEN z.PROV_TAX_ID IN (SELECT qz.PROV_TIN FROM [SQS_Mailed_TINs] qz with (nolock) where qz.Mailing = 'Objector' AND qz.PROV_TIN = z.PROV_TAX_ID)
    THEN 'ERROR'
    else 'Market Review/Preparing to Mail'
    END AS [Updated Bucket]
    ,COALESCE(q.INDdesc, f.IND_desc) AS INDdesc
    ,f.Time_Period_for_Dispute
    ,f.Renew_Term_Ind
    ,f.Renewal_Date
    ,z.SMG_ID
    ,'' AS OrderedRank
    INTO dbo.SQS_Bucketed_Details_SMG with (nolock)
    From #SQS_EDW_SOURCE_WithSMG z
    left join #F f ON f.PROV_TAX_ID = z.PROV_TAX_ID
    AND z.SYSTEMNAME = f.SYSTEM_NAME
    AND z.PROVIDERNAME = f.Provider
    Left join #Q q ON z.PROV_TAX_ID = q.TIN
    GROUP BY z.SYSTEMNAME
    --,Z.[SubsystemName]
    ,z.PROVIDERNAME
    ,z.STATECODE
    ,z.PROV_TAX_ID
    ,z.SRC_PAR_CD
    ,q.INDdesc
    ,f.IND_Desc
    ,f.Time_Period_for_Dispute
    ,f.Renew_Term_Ind
    ,f.Renewal_Date
    ,z.SMG_ID
    ,z.Hosp_Ind
    /************************** Drop temp tables*********************/
    --DROP TABLE #SQS_EDW_SOURCE_WithSMG
    --DROP TABLE #Q
    --DROP TABLE #F
    --DROP TABLE #HIHO_Records
    --DROP TABLE #SQS_TINtoSystem
    --DROP TABLE #SQS_EDW_SOURCE_WithSMG
    --DROP TABLE #sqs_objector_TINs

  • My mac pro is taking long to open any program what is the cause of this

    my mac pro is taking long to open any program what is the cause of this

    Launch the Console application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
    Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
    View ▹ Show Log List
    from the menu bar.
    Click the Clear Display icon in the toolbar. Then try the action that you're having trouble with again. Select any messages that appear in the Console window. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
    When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
    Please do not indiscriminately dump thousands of lines from the log into this discussion.
    Important: Some private information, such as your name, may appear in the log. Anonymize before posting.

  • SSRS Reports taking long time to load

    Hello,
    Problem : SSRS Reports taking long time to load
    My System environment : Visual Studio 2008 SP1  and SQL Server 2008 R2
    Production Environment : Visual Studio 2008 SP1  and SQL Server 2008 R2
    I have created a Parameterized report (6 parameters), it will fetch data from 1 table. table has 1 year and 6 months data,      I am selecting parameters for only 1 month (about 2500 records). It is taking almost 2 minutes and 30 seconds
    to load the report.
    This report running efficiently in my system (report load takes only 5 to 6 seconds) but in
    production it is taking 2 minutes 30 seconds.
    I have checked the Execution log from production so I found the timing for
    Data retrieval (approx~)       Processing (approx~)               Rendering (approx~)
    10 second                                      15 sec                        
                2 mins and 5 sec.
    But Confusing point is that , if I run the same report at different time overall output time is same (approx) 2 min 30 sec but
    Data retrieval (approx~)       Processing (approx~)                Rendering (approx~)
    more than 1 min                            15 sec                                     
    more than 1 min
    so 1 question why timings are different ?
    My doubts are
    1) If query(procedure to retrieve the data) is the problem then it should take more time always,
    2) If Report structure is problem then rendering will also take same time (long time)
    for this (2nd point) I checked on blog that Rendering depends on environment structure e.g. Network bandwidth, RAM, CPU Usage , Number of users accessing same report at a time.
    So I did testing of report when no other user working on any report But failed (same result  output is 2 min 30 sec)
    From network team I got the result is that there is no issue or overload in CPU usage or RAM also No issue in Network bandwidth.
    Production Database Server and Report server are different (but in same network).
    I checked that database server the SQL Server is using almost Full RAM (23 GB out of 24 GB)
    I tried to allocate the memory to less amount up to 2GB (Trial solution I got from Blogs) but this on also failed.
    one hint I got from colleague that , change the allocated memory setting from static memory to dynamic to SQL Server
    (I guess above point is the same) I could not find that option Static and Dynamic memory setting.
    I did below steps
    Connected to SQL Server Instance
    Right click on Instance go to properties, Go to Memory Tab
    I found three options 1) Server Memory   2) Other memory   3) Section for "Configured values and Running values"
    Then I tried to reduce Maximum  Server memory up to 2 GB (As mentioned above)
    All trials failed, this issue I could not find the roots for this issue.
    Can anyone please help (it's bit urgent).

    Hi UdayKGR,
    According to your description, your report takes too long to load on your production environment. Right?
    In this scenario, since the report runs quickly in developing environment, we initially think it supposed to be the issue on data retrieval. However, based on the information in execution log, it takes longest time on rendering part. So we suggest you optimize
    the report itself to reduce the time for rendering. Please refer to the link below:
    My report takes too long to render
    Here is another article about overall performance optimization for Reporting Services:
    Reporting Services Performance and Optimization
    If you have any question, please feel free to ask.
    Best Regards,
    Simon Hou

  • Reports taking long time to execute

    Hi,
    There are few reports on SSRS which are taking almost 6-8 minutes to complete and display the data.
    I am using Oracle database as source.
    When I checked the query performance, what I found that main data set is taking almost 2-3 minutes to execute on Sql developer. Also there are two parameters which are taking almost 1-1 minute to execute.
    When I run the report without these two parameters, report execution time is reduced by more than 3 minutes.
    Also I am using 3-4 groupings in the report and 6 columns are aggregated at each grouping.
    Reports are tabular reports and contains header, footers and 2-3 text boxes to display parameter values.
    Can you please provide me some ways to optimize the queries and reduce the time taken by report to complete.

    Hi sudipta,
    According to your description, it takes too long to render the report when accessing it. Right?
    In this scenario, it can be many possibilities which will reduce the report performance. We suggest you check the report on ReportServer first. Go to the ReportServer ExecutionLog to see which part takes more time.
    Then we need to do some troubleshooting to improve the report performance. Here we have a article for your reference:
    Troubleshooting Reports: Report Performance
    If you have any question, please feel free to ask.
    Best Regards,
    Simon Hou

  • Why does it take so long to render my video?

    I imported 11 mini discs and created a project with the intention of compiling them to be recorded on larger dvd. I can't understand what the background rendering is all about. I'm in my 4th day of rendering. Yesterday I stopped after 13+ hrs and today I'm in my 9th hr. I am not interested in adding any enhancements, additions, or anything else - just straight compilation of 11 minis to however many larger dvds. Why is it taking so long to do the background renderingf?

    I recommend turning off background rendering in the FAQs to the right of this forum. It's got more liabilities than benefits.
    http://forums.adobe.com/thread/503270?tstart=0
    Even still, it shouldn't take that long to render your files, assuming you've got a relatively powerful computer (i.e., at least a dual-core processor, up to date operating system and 2-4 gigs of RAM).
    How long is your project? A DVD can only hold about 70 minutes of video.
    And are you ensuring you're using the DVD project settings? If not, you'll run into problems eventually.
    As you add DVD or MPEG files to your project, the program will need to first assimilate them. This should only take a couple of minutes for each file, depending on how long they are.
    Once you place these files on your timeline, you will see a red line above them along the top of the timeline. Press Enter and the program will render them and the red line will turn green. Again, this shouldn't take more than 5 or 10 minutes, depending on how long your video is.
    Assuming, of course, that you have adequate hardware to support version 8, which needs about 2-3 times the power of previous versions.

  • Connecting to the database taking long time to connect database server

    Hi
    When I execute procedure i am getting the below message at bottom of the Oracle SQL Developer
    "Connecting to the database"
    it is taking more than 10 min plz guide

    Hi
    have you installed a normal Oracle Client also on your Host? normal Oracle Client
    Did you connect with host:port:sid or with a Oracle Naming Service? through TNS Service
    Can you test tnsping <alias> yes, It is working fine
    Did other user have the same problem? yes
    Did you connect through WAN or LAN connection? LAN (Intranet)
    Can you tell more about you client/database setup?
    Database setup:
    OS: Window 2008 server
    version: 11.1.0
    Client: 11.1.0
    OS: Window 2008 server
    Now I am not able to execute single select query which table contains 6 records and 15 columns it is taking long time I have waited 30 min still no resutls
    only one table is behaving like this remaining is working fine
    Edited by: user9235224 on Oct 6, 2012 7:06 PM

  • The ODS activation is taking long time

    Hi,
    We are on SAP NetWeaver BI 701 (Support Package 5).
    We create a Z ODS, it will contain a lot of data (180.000.000 month-end) and we want to generate specific reports about it.
    The activation is taking long time, I assume is because we checked the flag "SIDs Generation upon Activation". I am confused about this check. I really need it? is this check the only problem.
    Thanks for you help.
    Victoria

    Hi Victoria:
       If your Z DSO is used only for staging purposes (you don't have queries based on this DSO and you send the data to another DSO or to an InfoCube) then you don't need to check the "SIDs Generation Upon Activation" box.
    Even more, to achieve better performance during data loads in this scenario, you might consider using a Write Optimized DSO instead of a Standard DSO, but if you decide to take this alternative don't forget to select the "Do Not check Uniqueness of Data" box if you need to write several records with the same Semantic Key.
    Regards,
    Francisco Milán.

  • F4 Help is taking long time

    Hi All,
    We are working on BI 7.0. version
    In the varaible pop-up screen we have two info objects.
    1. Fiscal year Period
    2. JOA(Joint operating aggriment)
    If u press F4 for JOA, it is taking long time to execute and finally the application is getting closed.same situation is there in RSRT also.
    If i enter with out JOA the query is giving the output. Here i have to restrict the query by JOA.
    i have changed the JOA peroperties in query designer.
    Query execution for filter value selection = Values in master data table.......
    but still the situation is the same.......
    Could you please suggest any solution for this.....
    Thanks & Regards,
    PK

    Hi Kamal,
    You can set that at the query level in the query designer for each query.
    1. Select the corresponding characteristic in the query designer.
    2. Goto to the "Extended tab" in the properties
    3. Select the "Values in the Master data table" in the "Query execution in the filter value selection.
    Also see some recomendations:
    Note 748623 - Input help (F4) has a very long runtime - recommendations
    Hope this helps.
    CK

  • Update ztable is taking long time

    Hi All,
    i have run the 5 jobs with the same program at a time but when we check the db trace
    zs01 is taking long time as shown below.here zs01 is having small amount of data.
    in the below dbtrace for updating zs01 is taking 2,315,485 seconds .how to reduce this?
    HH:MM:SS.MS Duration     Program   ObjectName  Op.   Curs   Array   Rec     RC     Conn     
    2:36:15 AM     2,315,485     SAPLZS01  ZS01       FETCH  294     1     1     0     R/3     
    The code as shown below
    you can check the code in the program SAPLZS01 include LZS01F01.
    FORM UPDATE_ZS01.
    IF ZS02-STATUS = '3'.
        IF Z_ZS02_STATUS = '3'.            "previous status is ERROR
          EXIT.
        ELSE.
          SELECT SINGLE FOR UPDATE * FROM  ZS01
                 WHERE  PROC_NUM    = ZS02-PROC_NUM.
          CHECK SY-SUBRC = 0.
          ADD ZS02-MF_AMT TO ZS01-ERR_AMT.
          ADD 1           TO ZS01-ERR_INVOI.
          UPDATE ZS01.
        ENDIF.
      ENDIF.
    my question is when updating the ztable why it is taking such long time,
    how to reduce the time or how to make faster to update the ztable .
    Thanks in advance,
    regards
    Suni

    Try the code like this..
    data: wa_zs01 type zs01.
    FORM UPDATE_ZS01.
    IF ZS02-STATUS = '3'.
        IF Z_ZS02_STATUS = '3'.            "previous status is ERROR
          EXIT.
        ELSE.
          SELECT SINGLE FOR UPDATE * FROM  ZS01
                 WHERE  PROC_NUM    = ZS02-PROC_NUM.
    -- change
      CHECK SY-SUBRC = 0.
          ADD ZS02-MF_AMT TO wa_ZS01-ERR_AMT.
          ADD 1           TO wa_ZS01-ERR_INVOI.
          UPDATE ZS01 from wa_zs01.
        ENDIF.
      ENDIF.
    And i think this Select query for ZS01 is inside the ZS02 SELECT statement,
    This might also make slow process.
    If you want to make database access always use Workarea/Internal table to fetch the data
    and work with that.
    Accessing database like this or with Select.... endselect is an inefficient programming.

  • Simple query is taking long time

    Hi Experts,
    The below query is taking long time.
    [code]SELECT   FS.*
      FROM   ORL.FAX_STAGE FS
             INNER JOIN
                   ORL.FAX_SOURCE FSRC
                INNER JOIN
                   GLOBAL_BU_MAPPING GBM
                ON GBM.BU_ID = FSRC.BUID
             ON UPPER (FSRC.FAX_NUMBER) = UPPER (FS.DESTINATION)
    WHERE       FSRC.IS_DELETED = 'N'
             AND GBM.BU_ID IS NOT NULL
             AND UPPER (FS.FAX_STATUS) ='COMPLETED';[/code]
    this query is returning 1645457 records.
    [code]PLAN_TABLE_OUTPUT
    | Id  | Operation           | Name                   | Rows  | Bytes | Cost (%CPU)|
    |   0 | SELECT STATEMENT    |                        |   625K|   341M| 45113   (1)|
    |   1 |  HASH JOIN          |                        |   625K|   341M| 45113   (1)|
    |   2 |   NESTED LOOPS      |                        |   611 | 14664 |    22   (0)|
    |   3 |    TABLE ACCESS FULL| FAX_SOURCE             |  2290 | 48090 |    22   (0)|
    |   4 |    INDEX RANGE SCAN | GLOBAL_BU_MAPPING_BUID |     1 |     3 |     0   (0)|
    |   5 |   TABLE ACCESS FULL | FAX_STAGE              |  2324K|  1214M| 45076   (1)|
    PLAN_TABLE_OUTPUT
    Note
       - 'PLAN_TABLE' is old version
    15 rows selected.[/code]
    The distinct number of records in each table.
    [code]SELECT FAX_STATUS,count(*)
    FROM fax_STAGE
    GROUP BY FAX_STATUS;
    FAX_STATUS    COUNT(*)
    BROKEN          10
    Broken - New    9
    Completed    2324493
    New             20
    SELECT is_deleted,COUNT(*)
    FROM  FAX_SOURCE
    GROUP BY IS_DELETED;
    IS_DELETED COUNT(*)
    N         2290
    Y         78[/code]
    Total number of records in each table.
    [code]SELECT COUNT(*) FROM ORL.FAX_SOURCE FSRC-- 2368
    SELECT COUNT(*) FROM ORL.FAX_STAGE--2324532
    SELECT COUNT(*) FROM APPS_GLOBAL.GLOBAL_BU_MAPPING--9
    [/code]
    To improve the performance of this query I have created the following indexes.
    [code]Functional based index on UPPER (FSRC.FAX_NUMBER) ,UPPER (FS.DESTINATION) and UPPER (FS.FAX_STATUS).
    Bitmap index on FSRC.IS_DELETED.
    Normal Index on GBM.BU_ID and FSRC.BUID.
    [/code]
    But still the performance is bad for this query.
    What can I do apart from this to improve the performance of this query.
    Please help me .
    Thanks in advance.

    <I have created the following indexes.
    CREATE INDEX ORL.IDX_DESTINATION_RAM ON ORL.FAX_STAGE(UPPER("DESTINATION"))
    CREATE INDEX ORL.IDX_FAX_STATUS_RAM ON ORL.FAX_STAGE(LOWER("FAX_STATUS"))
    CREATE INDEX ORL.IDX_UPPER_FAX_STATUS_RAM ON ORL.FAX_STAGE(UPPER("FAX_STATUS"))
    CREATE INDEX ORL.IDX_BUID_RAM ON ORL.FAX_SOURCE(BUID)
    CREATE INDEX ORL.IDX_FAX_NUMBER_RAM ON ORL.FAX_SOURCE(UPPER("FAX_NUMBER"))
    CREATE BITMAP INDEX ORL.IDX_IS_DELETED_RAM ON ORL.FAX_SOURCE(IS_DELETED)
    After creating the following indexes performance got improved.
    But our DBA said that new BITMAP index at FAX_SOURCE table (ORL.IDX_IS_DELETED_RAM) can cause locks
    on multiple rows if IS_DELETED column is in use. Please proceed with detailed tests.
    I am sending the explain plan before creating indexes and after indexes has been created.
    SELECT  FS.*
    FROM  ORL.FAX_STAGE FS
                    INNER JOIN
                    ORL.FAX_SOURCE FSRC
                  INNER JOIN
                      GLOBAL_BU_MAPPING GBM
                    ON GBM.BU_ID = FSRC.BUID
                ON UPPER (FSRC.FAX_NUMBER) = UPPER (FS.DESTINATION)
    WHERE      FSRC.IS_DELETED = 'N'
              AND GBM.BU_ID IS NOT NULL
              AND UPPER (FS.FAX_STATUS) =:B1;
    --OLD without indexes
    PLAN_TABLE_OUTPUT
    Plan hash value: 3076973749
    | Id  | Operation          | Name                  | Rows  | Bytes | Cost (%CPU)| Time    |
    |  0 | SELECT STATEMENT    |                        |  141K|    85M| 45130  (1)| 00:09:02 |
    |*  1 |  HASH JOIN          |                        |  141K|    85M| 45130  (1)| 00:09:02 |
    |  2 |  NESTED LOOPS      |                        |  611 | 18330 |    22  (0)| 00:00:01 |
    |*  3 |    TABLE ACCESS FULL| FAX_SOURCE            |  2290 | 59540 |    22  (0)| 00:00:01 |
    |*  4 |    INDEX RANGE SCAN | GLOBAL_BU_MAPPING_BUID |    1 |    4 |    0  (0)| 00:00:01 |
    |*  5 |  TABLE ACCESS FULL | FAX_STAGE              | 23245 |    13M| 45106  (1)| 00:09:02 |
    PLAN_TABLE_OUTPUT
    Predicate Information (identified by operation id):
      1 - access(UPPER("FSRC"."FAX_NUMBER")=UPPER("FS"."DESTINATION"))
      3 - filter("FSRC"."IS_DELETED"='N')
      4 - access("GBM"."BU_ID"="FSRC"."BUID")
          filter("GBM"."BU_ID" IS NOT NULL)
      5 - filter(UPPER("FS"."FAX_STATUS")=SYS_OP_C2C(:B1))
    21 rows selected.
    --NEW with indexes.
    PLAN_TABLE_OUTPUT
    Plan hash value: 665032407
    | Id  | Operation                        | Name                    | Rows  | Bytes | Cost (%CPU)| Time    |
    |  0 | SELECT STATEMENT                |                          |  5995 |  3986K|  3117  (1)| 00:00:38 |
    |*  1 |  HASH JOIN                      |                          |  5995 |  3986K|  3117  (1)| 00:00:38 |
    |  2 |  NESTED LOOPS                  |                          |  611 | 47658 |    20  (5)| 00:00:01 |
    |*  3 |    VIEW                          | index$_join$_002        |  2290 |  165K|    20  (5)| 00:00:01 |
    |*  4 |    HASH JOIN                    |                          |      |      |            |      |
    |*  5 |      HASH JOIN                  |                          |      |      |            |      |
    PLAN_TABLE_OUTPUT
    |  6 |      BITMAP CONVERSION TO ROWIDS|                          |  2290 |  165K|    1  (0)| 00:00:01 |
    |*  7 |        BITMAP INDEX SINGLE VALUE | IDX_IS_DELETED_RAM      |      |      |            |      |
    |  8 |      INDEX FAST FULL SCAN      | IDX_BUID_RAM            |  2290 |  165K|    8  (0)| 00:00:01 |
    |  9 |      INDEX FAST FULL SCAN        | IDX_FAX_NUMBER_RAM      |  2290 |  165K|    14  (0)| 00:00:01 |
    |* 10 |    INDEX RANGE SCAN              | GLOBAL_BU_MAPPING_BUID  |    1 |    4 |    0  (0)| 00:00:01 |
    |  11 |  TABLE ACCESS BY INDEX ROWID    | FAX_STAGE                | 23245 |    13M|  3096  (1)| 00:00:38 |
    |* 12 |    INDEX RANGE SCAN              | IDX_UPPER_FAX_STATUS_RAM |  9298 |      |  2434  (1)| 00:00:30 |
    Predicate Information (identified by operation id):
    PLAN_TABLE_OUTPUT
      1 - access(UPPER("DESTINATION")="FSRC"."SYS_NC00035$")
      3 - filter("FSRC"."IS_DELETED"='N')
      4 - access(ROWID=ROWID)
      5 - access(ROWID=ROWID)
      7 - access("FSRC"."IS_DELETED"='N')
      10 - access("GBM"."BU_ID"="FSRC"."BUID")
          filter("GBM"."BU_ID" IS NOT NULL)
      12 - access(UPPER("FAX_STATUS")=SYS_OP_C2C(:B1))
    31 rows selected
    Please confirm on the DBA comment.Is this bitmap index locks rows in my case.
    Thanks.>

  • Fwrite() and fread() of a shared FAT32 formatted file is taking long time in MAC osx Lion C program

    Hi
    Is there any provision or api in MAC to open a file in shared mode same as windows
       hUSBdrive = CreateFile(pDriveName, GENERIC_READ | GENERIC_WRITE, FILE_SHARE_READ | FILE_SHARE_WRITE, NULL, OPEN_EXISTING, FILE_FLAG_NO_BUFFERING, NULL);
    we have the follwing scenario where a file is shared among two processes for read/write.one is running on Linux and the other one is running on MAC.where both the processses are reading/writing into the same memory location in the file say "X"
    FAT 32 formatted raw data file which is located on the device, is shared among two processes.
    One process is running on Linux device which is connected to MAC book through usb.In this linux process, the file is opened using fopen() and we have used fcntl() with O_DIRECT flag.This process continuously reads/writes data on memory location "X" in the shared file .
    The other process is running on Mac which has simple c program that opens the file on the connected device i.e from usb drive and reads/writes data using fread()/fwrite().fopen() is used to open the file and FILE_NOCACHE flag is used to avoid caching.
    The value at memory location "X" is updated by mac by using fwrite() and the linux process reads the memory location "X" by using fread(). Linux process is taking around 30 sec to get the updated value.
    If the value is updated by Linux process at memory location "X" by using fwrite() the MAC process is also taking long time more than a minute to read the updated value by usng fread().
    fwrite()/fread() on mac is taking long time where as the windows application which uses the same apis is taking msec time.
    Do we need to use other api s or flags to open file?
    thanks in advance.......

    does any one face this kind of problem?
    fwrite() and fread() takes long time?
    Is there any problem in read/write to a fat32 file on MAC?

  • RSPCM is taking long time

    Hi,
    RSPCM is taking long time to open at the same time RSPC is working fine
    when I try to change the process chain status through RSPC_PROCESS_FINISH . it is executing for long time no response. I tried executing it backgrond also from past 2 days it is running, no progress.
    Our basis team created index to all backend table of RSPCM, still issue persist. Please suggest me some to get rid of this.
    Br,
    Harish

    hi,
    Please check the below thread
    RSPCM T-Code was executing very slow
    Please check note 1372931
    hope it helps!
    Edited by: Lavanya J on Nov 4, 2011 1:32 PM

Maybe you are looking for

  • IPod not playing music or video

    I updated to 4.1 and all of a sudden my iPod won't play music or videos. Also I can't hear any of the keyboard clicks when I type on it. Won't play through the AUX or the USB ports either. Things I tried: 1. Reseting 2. Hard reset 3. Factory Restore

  • Trying to connect my wired PC to the wireless airport express via the wireless router.

    Trying to connect my wired PC to the wireless airport express via the wireless router.  TP-link wired/wireless router.  Ultimate goal is to send music from iTunes on PC to wireless router, then to airport, then to reciever.  The amber light is blinki

  • Export from Captivate to MS Office (PowerPoint, Word)

    Good day! I have a question. I Have a Captivate project (slides). This slides are made in Captivate, but I want to export it in MS Office (PowerPoint or Word) and then change this slides in MS Office programs. How can I do this?

  • What's going on with xfce?

    Hi! I don't get it. Some time ago, my main reasons to stick with xfce were: - light, fast, easy to understand - no need for many "confusing" additions gnome needs - brings thunar & panel, I choose the rest freely without "wasting built-in prerequisit

  • How to increase legibility of printng in display

    HELP! I replaced my 5-year-old eMAC with a 20" iMAC. Printing on the iMAC screen (Help, eMail Discussions. etc.) is so small and dim that I can hardly read it without a magnifying glass There was provision on the eMAC to make print larger when needed