Yoga 10 HD+ system settings screen annoying single column

Hi
Anybody else having annoyances with the system settings screen on the HD+ ?
I got it with 4.3 (last week) so naturally I updated it to 4.4.2 very fast. Going to system setting under 4.3 it displayed the settings in two columns like you'd expect on a 10" tablet. However on 4.4.2 the setting is displayed on a single column like a mobile phone.
Quite annoying and I'd like to get the two columns back like it is on all other Android tablets. Anyone has an ide what to try? Believe I've tried almost everything except a reset and I'm more or less clueless about what to try next.
Thanks

Thanks for feedback
Switch to different modes? ? Tilt mode, stand mode, hold mode? Doesn't help.
I've taken two screenshots to better illustrate.
Lenovo HD+
Cheap junk tablet
As can be seen on the HD+ the about tablet is displayed like on a (insanely large) mobile phone while on the cheap junk tablet it's displayed like I'd expect in two columns.

Similar Messages

  • SG 200-08 does not permit changing System Settings screen

    I am unable to change the settings on this screen:
    Administration => System Settings
    The GUI objects to any of the combination of characters I've entered into 'Hostname', including the provided default.
    --sk

    Verified this under both 1.0.5.1 and 1.0.6.2

  • Where is the documentation of the options on the 'System Services' settings screen?

    The settings screen Settings ▸ Location Services ▸ System Services in iOS 5.0 contains the following boolean options:
    Cell Network Search
    Compass Calibration
    Diagnostics & Usage
    Location-Based iAds
    Setting Time Zone
    Traffic
    I have never used an iPhone before and do not understand what each of these services do. Where can I find Apple's documentation of these options?

    As I say, I've disabled all of them and see no need for any of them.
    As far as I have been able to determine these are being used to build up location based databases for use in advertising, marketing and other commercial uses:
    Cell Network Search - tracks the cell towers you are connected to and your location to aid in building up a database of cell phone tower locations and useage
    Compass Calibration - this one I have no idea about.  It is absolutely not necessary for the actual act of calibrating your compassapp, and your compass app works fine with it disabled.  Why anyone would find it useful to know where I was when I had to calibrate my compass, I have no idea.
    Diagnostics & Usage - this one is obvious, and is used to tag your location if you have chosen to send diagnostic and usage information to Apple.  I can see where it might help them to know where you were when you had some issue (ie. so they could see if the area correlates with frequent network errors or such)
    Location-Based iAds - also obvious, but I don't want marketers targeting me with ads based on where I am,  I find internet advertising far too intrusive as it is, I have no desire to aid them in pestering me even more.
    Setting Time Zone - this one I don't get.  If you have data & time set to "automatic" this is pointless, as they date and time (and hence time zone) will be set by your devices connection to the cell tower(s).  I have no rational thoughts as to what this being used for, or what good it may do.
    Traffic - this is apparently somehow used to update a database of traffic patterns.  How it knows what the traffic around me is, I do not know - ie. what triggers it, I have no idea.
    Anyway, I have them all disabled, as I can see no rational reason to have any of them on.  They just needlessly use up my battery, and are sending data to places that I have no idea of or about, for purposes I have no clue about, all of which, going by the complete lack of information about them, is by design (which just irritates me - at least explain the dang things or don't bother even including them).

  • Unicode BI system Settings

    Dear All,
    We are getting a brand new BI Unicode system.
    I have read few documents related to Unicode and have folowing doubts.
    1. what are the basic settings need to be done for AutoText translation of BW objects?
    For example , If I login in French , I should be able to see all descriptions in French for all developments without we maintaining it in each of the logon languages.
    I think it is possible in unicode systems.
    2. How to find whether my source systems(R/3) are single code page or MDMP.
    3. Any other settings we need to do for BI Unicode systems while extracting the data and any compatability issues we can expect.
    Please suggest.

    Hi Ugendhar,
    again I have to stress that the language handling regarding translation is NOT different between Unicode and Non-Unicode systems.
    Unfortunately I do not have the detailed knowledge about specific BW objects - I can just give you a general answer concerning ABAP objects. So maybe for an BW info package there are different rules ...
    1) Secondary language access (please also have a look at SAP note 1156507)
    This is the commonly used expression for the system reaction in case of missing translations - e.g. you create a language dependent text and do not translate this one to other languages.
    For ABAP based system, the system response is not always the same for missing translations.
    The system displays the texts in the original language, in the secondary
    language (defined in profile parameter zcsa/second_language - in particular screen texts, ABAP Dictionary texts and menu
    texts) or as technical labels (for example, selection texts or units of
    measurement).
    Especially for customizing texts, the typical behaviour is to show empty fields.
    Therefore, SAP recommends to perform a language supplementation right after a
    language import and later on a regular basis (see SAP note 315375). 
    As a consequence, you will see the texts in all supplemented languages in the same language.
    If you maintain it in EN, you will see the text only in EN in all other languages.
    Please also have a look at
    http://service.sap.com/~form/sapnet?_SHORTKEY=01100035870000380759&_OBJECT=011000358700002027182008E
    --> page 21
    2) Translation
    If you want to see the according text translated into French language (when logon with FR), you will need to actively translate it - as I already stated before, I do not know of a tool doing this automatically !
    In general, you can only extract languages to SAP NetWeaver BI, which are defined in the profile parameter ZCSA/INSTALLED_LANGUAGES (language vector).
    All the points stated above are valid for Unicode AND Non-Unicode systems.
    Best regards,
    Nils Buerckel

  • I just upgraded to the New OS on my Mac Book Pro and now my trackpad does not zoom in or out.  I looked at system settings on trackpad and it is set, but does not work How do I get it started?

    I just upgraded to the New OS on my Mac Book Pro and now my trackpad does not zoom in or out.  I looked at system settings on trackpad and it is set, but does not work How do I get it started?

    This is really unfortunate. I'm sorry that nothing works. I was going to mention holding down the power button and doing a force shutdown but you already did that. You might need to take it into the Apple store. I don't know if booting into safe mode would help. You would have to turn off the machine again, hit the start button and hold down the shift key after you hear the tone, but normally you would let go of the shift key when you see the apple logo and spining wheel. Maybe by holding down the shift key after you here the tone will cause the screen to come back on? The other option is to start up from the 'install disk' if your machine came with one. You would insert the disk, then shut down the computer, and hold down the C key right after hitting the start button.
    Here's the link for the safeboot
    http://support.apple.com/kb/HT1564?viewlocale=nl_nl

  • Good day!   On the ultrabook Asus (System Settings: WIN 8.1 64-bit, Core I5-3317U CPU @ 1.70 Ghz, Memory 4 Gb), set Adobe Acrobat XI Pro 11.0.09  When you convert to any format via SaveAs in WORD, EXCEL, or via the Export file in ... throws the error "Una

    Good day!
    On the ultrabook Asus (System Settings: WIN 8.1 64-bit, Core I5-3317U CPU @ 1.70 Ghz, Memory 4 Gb), set Adobe Acrobat XI Pro 11.0.09
    When you convert to any format via SaveAs in WORD, EXCEL, or via the Export file in ... throws the error "Unable to process the document in the module Save As. File not created"

    This happens with any file .
    Send a file with the screen errors and system data . Also send a couple of files PDF.
    Translates only txt format.
    Acrobat установлен: C:\Program Files (x86)\Adobe\Acrobat 11.0\Acrobat\Acrobat.exe
        Версия: 11.0.9.29
      Дата создания: 2014/09/12
        Время создания: 13:43:46
    Браузер по умолчанию:
    Версия BIOS: _ASUS_ - 1072009
    Версия ОС: 6.2.9200 
    Всего виртуальной памяти: 4194176 KB
    Всего физической памяти: 4077252 KB
    Графическая плата: Intel(R) HD Graphics 4000
        Версия: 10.18.10.3412
        Отметить: Не поддерживается
    Доступная виртуальная память: 3638168 KB
    Доступная физическая память: 1689940 KB
    Имя пользователя: Vazgen
    Имя системы: VAZGENTAICHI
    Монитор:
        Название: Intel(R) HD Graphics 4000
        Разрешение: 1920 x 1080 x 60
        Бит на пиксел: 32
    Название ОС: Microsoft Windows Vista
    Папка Windows: C:\WINDOWS
    Папка для временных файлов: C:\Users\Vazgen\AppData\Local\Temp\
    Почтовая программа по умолчанию: Microsoft Outlook
        mapi32.dll
        Версия: 1.0.2536.0 (winblue_rtm.130821-1623)
    Производитель ОС: Microsoft Corporation
    Процессор: Intel64 Family 6 Model 58 Stepping 9 GenuineIntel  ~1696  Mhz
    Сведения о Windows:
       Планшетный ПК: Да
       Начальная версия: Нет
       Media Center Edition: Нет
       Медленный компьютер: Нет
    Сведения о сеансе:
       Тип загрузки: Обычный
       Завершение работы: Нет
       Сеть: Доступно
       Внутри Citrix: Нет
       Внутри VMWare: Нет
       Удаленный сеанс: Нет
       Удаленное управление: Нет
       Использование JAWS: Нет
       Использование Windows-Eyes: Нет
       Использование NVDA: Нет
    Сведения об Acrobat:
       Изолирование программной среды: Отключить
       Связанная программа для чтения: Нет
       Multi-Reader с поддержкой Desktop: Отключить
    Сведения об отображении:
       Ширина экрана: 1920
       Высота экрана: 1080
       Число мониторов: 2
       Число кнопок мыши: 2
       Мышь с колесом прокрутки: Нет
       С маркером Windows: Нет
       Двухбайтовая кодировка: Нет
       С редактором метода ввода: Да
       В программе для чтения с экрана: Нет
    Сведения об учетной записи:
       Права пользователя: Администратор
       Управление учетной записью пользователя: Ограниченное
       Целостность процесса: Не определено
       Тип профиля: Отсутствует
    Установленные приложения:
       Версия Office: Office 2013 32-bit
    Файл подкачки: 4194303 KB
    Часовой пояс: Московское время (зима)
    Язык: Русский (Россия)
    C:\Program Files (x86)\Adobe\Acrobat 11.0\Acrobat\plug_ins\Accessibility.api
        Версия: 11.0.9.29
      Дата создания: 2014/09/12
        Время создания: 13:44:20
    C:\Program Files (x86)\Adobe\Acrobat 11.0\Acrobat\plug_ins\Annots.api
        Версия: 11.0.9.29
      Дата создания: 2014/09/12
        Время создания: 13:44:22
    C:\Program Files (x86)\Adobe\Acrobat 11.0\Acrobat\plug_ins\IA32.api
        Версия: 11.0.9.29
      Дата создания: 2014/09/12
        Время создания: 13:44:18
    C:\Program Files (x86)\Adobe\Acrobat 11.0\Acrobat\plug_ins\PaperCapture.api
        Версия: 11.0.9.29
      Дата создания: 2014/09/12
        Время создания: 13:43:36
    C:\Program Files (x86)\Adobe\Acrobat 11.0\Acrobat\plug_ins\SaveAsRTF.api
        Версия: 11.0.9.29
      Дата создания: 2014/09/12
        Время создания: 13:44:20
    C:\Program Files (x86)\Adobe\Acrobat 11.0\Acrobat\plug_ins\SendMail.api
        Версия: 11.0.9.29
      Дата создания: 2014/09/12
        Время создания: 13:44:20
    C:\Program Files (x86)\Adobe\Acrobat 11.0\Acrobat\plug_ins\Updater.api
        Версия: 11.0.9.29
      Дата создания: 2014/09/12
        Время создания: 13:44:22

  • System settings Package management part crashes on open

    Hello all,
    Whenever I open the system settings and then go to "package management" EVERY TIME the screen shows up and inmediatly closes and I get a KDE crash handler window.
    Please note I am using KDEmod repos.
    If I hover over the Package Management icon I get that it contains 2 items, which are "Aqpm global configuration" and "Aqpm databases configuration"
    No idea of what could be happening, I checked and the package kdemod-aqpm is installed
    Any more info you need just ask I will be around.
    cheers

    There'sa forum for kdemod here - you might get a quicker/better answer there.

  • System settings

    My system settings app is not letting me change my background WHAT DO I DO?

    Welcome to the Apple Support Communities
    What happens when you open System Preferences > Desktop & Screen Saver? If System Preferences gets frozen, your Desktop settings file is damaged.
    First, open Finder, select Go menu (on the menu bar) > Go to Folder, and type ~/Library/Preferences. Then, delete "com.apple.desktop.plist" and "com.apple.systempreferences.plist", and restart. Finally, you will be able to change the wallpaper

  • System settings icon gone

    My system settings icon is gone from my first home page.  Any way to get it back without doing a system restore?  Thanks.

    - Try a reset, nothing will be lost.
    Reset iPod touch:  Press and hold the On/Off Sleep/Wake button and the Home
    button at the same time for at least ten seconds, until the Apple logo appears.
    - Have you tried using the Spotlight search feature to try tofind it.  It is likely somewhere andyy just can't find it since theSynstem app can't be deleted or hidden.
    - Reset the screen layout: Settings>General>Reset>Reset Screen Layout.

  • Final Cut System Settings

    In System settings the Audio Capture is grayed out. Is it supposed to be grayed out and why?
    Thank you

    If you're capturing via Firewire, the audio is non-selectable because it transfers with the video as a single data stream. If you're using a capture card, please let us know which one ... there may be settings on the card's drivers that needs adjusting.
    -DH

  • Network Setup trying to modify your system settings...This box won't go away!

    OSX Version 10.8.1....Since I have updated, I get "networksetup is trying to modify your system settings. Type your password to allow this" Sometimes there are ten of these boxes on top of each other, so I'm constantly typing in my password or clicking cancel..cancel...cancel... Sometimes it's very difficult to make it go away, and is extremely annoying. Any suggestions?
    Thanks
    Chris

    Your key chain probably needs some attention, reset it for the same password thru out. Go to utilities, keychain access, and you might be able to find the offender, also read the following.
    http://support.apple.com/kb/HT1274
    http://support.apple.com/kb/HT1631
    http://support.apple.com/kb/TS1544
    http://support.apple.com/kb/HT1631
    Hope there is some hlp for you here.
    ATB

  • Trying to update apple tv (small black box).  how do i do update?  can't find system settings. i see system preferences no mac pro.  does apple tv need to be plugged into hdtv for the update or PC.  If PC, how?

    trying to update apple tv (small black box).  how do i do update?  can't find system settings. i see system preferences no mac pro.  does apple tv need to be plugged into hdtv for the update or PC.  If PC, how?

    You have to do it on the Apple TV itself while it's plugged into a TV so that you can see its screen.
    I quote
    How to update software on your Apple TV (2nd and 3rd generation)
    Learn how to update the software on your Apple TV (2nd and 3rd generation). It's always a good idea to have the latest software on your Apple TV.
    Update your software
    Select Settings > General > Update Software. Apple TV checks for an available update; if one is available, a download message should appear.
    Click Download and Install to start the download process.
    Do not disconnect your Apple TV during the update process. The Apple TV status light may flash slowly during the update and restart process. This is expected behavior.

  • BB10 / Z10 Swiping back from System Settings, Menu / App sort order, BB10 UI recognizing email / phoneno / addresses

    There some inconsistencies within the BB10 UI which I finally figured is derived by the ability to swipe back from the stock UI except from within the system settings where we have to use the back button to go back between screens. 
    Can we have option to sort System Menus or Application Drawer and the ability to hide applications like previous BBOS?
    BB10 UI is not intuitive in regards to recognizing email / phone nos / addresses compared to prior BBOS. A lot of trial and error copy and pasting to do what you want to do with said contact info until figuring out what works.  Unfortunately besides not being able to call a phoneno directly from anywhere, a user does not have the ability to copy and paste number on a dialer or search item to call like previous BBOS. User will have to either try to go back and for the between screens to dial and call the number or use the trust pen and paper method.

    Okay, yes, I'm suffering from new phone syndrome but ill ask these final things for today. Home / Lock screen customization would be nice. Between the phone / search / camera icons on the bottom bar theres empty space which can fit two other icons like maybe one for brower and text. May we get the option to change these shortcuts? I for one do not use the camera often so it's useless to me on the Home / Lock screens. May we also get an option to pin active frames so we do not have to keep opening the same ones, in my case battery and weather apps. I know it would drain the battery faster but hey its my choice and that's why I'm getting the BlackBerry battery bundle for ADD people like myself.
    Finally, may we get more password options like swipe pattern found on Android phones to unlock the phone. During my cup of tea with the enemy, that was one of my favorite features as it was a lot faster to do one handed than text based passwords. Again, the camera is useless to me so having other than that on the lock screen would be great. Please let me have the choice to see a brief description of my notifications on the lockscreen like the descriptions found on the drop down drawer from previous BBOS. It has notification counters and agenda info but I want more like the ability for these icons to quick launch to their respective apps like email to email or text to text app. Even power button screen can have more quick toggle options like quickly going to vibrate or airplane mode.
    If all these things are not something BlackBerry wants to do themselves, especially since most are old BlackBerry features, please bring back BlackBerry Themes. There are many talented BBOS UI designers who are being left behind in the old world who could greatly help fine tune the UI to specific needs and interests. I believe these themes would definitely be a hit in BlackBerry world and I would purchase them if I found one that suits how I want to use the phone quickly and efficiently.
    All in all it is great phone which unfortunately a BlackBerry power users have to dumb down for any expected BlackBerry features that are not there yet or may never be possible for a full touch phone. Due to my line of work, the quest to owning just one phone will continue to elude me because I need / require the ability to filter and set level one notifications. Current enterprise users know what I'm talking about. Hopefully they will come.

  • System Settings will not save my desired mouse scroll direction

    I understand the Apple genius of wanting the Settings: Mouse: Scroll direction: Natural box to be checked.  But **** it, this is MY iMac and I want the scroll direction to remain Unchecked, so the screen scrolls in the direction I’ve been used to for YEARS.
    The problem is the System Settings will not save the unchecked scroll box.  I have to return to the System Settings every time I log on to UN check the Scroll Direction: Natural box.
    Will Apple ever fix this so that I, and others, can operate the scrolling as THEIR LONG-TIME USER sees fit?

    Send Apple feedback. They won't answer, but at least will know there is a problem. If enough people send feedback, it may get the problem solved sooner.
    Feedback
    Or you can use your Apple ID to register with this site and go the Apple BugReporter. Supposedly you will get an answer if you submit feedback.
    Feedback via Apple Developer
    Do a backup.
    Quit the application.
    Go to Finder and select your user/home folder. With that Finder window as the front window, either select Finder/View/Show View options or go command - J.  When the View options opens, check ’Show Library Folder’. That should make your user library folder visible in your user/home folder.  Select Library. Then go to Preferences/com.apple.systempreferences.plist. Move the .plist to your desktop.
    Restart, open the application and test. If it works okay, delete the plist from the desktop.
    If the application is the same, return the .plist to where you got it from, overwriting the newer one.
    Thanks to leonie for some information contained in this.

  • Automator for changing system settings?

    Here's my issue: I have an external monitor connected to my 2010 Macbook Pro with OSX Snow Leopard. I do all my work when I'm at home on the larger monitor and use the other screen for iTunes. I use spaces alot, and so when using my external monitor, I put iTunes to open on all spaces so that it's always handy. When I go out with my laptop, I have to change the spaces settings back to iTunes only being open in one space.
    It's not a big issue, but does anyone know how to use automator (or by any other means) to automatically change the system settings so that my computer can, on detecting I have an external monitor plugged in, change the spaces settings for iTunes? (and preferably back again when it doesn't have the external monitor plugged in).

    Hi there :)
    You can connect directly to the DB without a DSN like this:
    url = "jdbc:odbc:Driver={Microsoft Access Driver (*.mdb)};DBQ=<YOUR DB LOCATION HERE>;
    try
    Class.forName ("sun.jdbc.odbc.JdbcOdbcDriver");
    icuCon = DriverManager.getConnection (url);
    catch (Exception e)
    You will obviously replace <YOUR DB LOCATION HERE> with the location of your database for example you can set the url of the database like this:
    url = "jdbc:odbc:Driver={Microsoft Access Driver (*.mdb)};DBQ=" +
    System.getProperty ("user.dir") + System.getProperty ("file.separator") +
    "DBFolder" + System.getProperty ("file.separator") + "DB.mdb";
    Matt

Maybe you are looking for