Yoga 13 Est. Ship Date Way More Than 4 Weeks

So today I ordered the Yoga 13 and on the sales page it says "more than 4 weeks" and that the date could change. After I ordered it, it says the estimated ship date is January 4, 2013 on my status. That's actually more than 8 weeks. What's up with that? Anybody on here gotten their Yoga 13 way before the estimated ship date or know anything about these estimates and how accurate they are? I really hope I don't have to wait until next year to get this.

Absolutely positively you WILL be shipped a unit and WILL be charged no matter what they tell you regarding cancelation.
I got confirmed email confirmation of cancelation within 1 hr of my order and they still shipped it over a month later and charged me AFTER it arrived. And they kept sending me delay notices of shipment. They sent me warranty registration packages and some free extra items that were supposed to ship with it.
This has happened twice !!
Once you gave them your credit card, your money is their control, no matter what and you have to fight to get it back and you have to wait until it arrives and you are charged before you can do anything.
You will get it back. Eventually.
This is their nasty practices. You can't even fight it with credit card company because they have not charged you yet. You can't block it. Even when I refused the package and tried to do it through the credit card company they won't do anything unless you show effort you tried to do with Lenovo and they have 2 weeks to act.
It should be illegal, but they are in China and can do what ever they want.
I considered canceling credit card and getting a new one issued. But I'm not sure if that would even work because it could be preapproved and not show on your account.

Similar Messages

Why is my iphone 5 using so much data, way more than I ever used before. How do I fix it?

I am using waaaaay more data than ever before since switching to an iphone 5. I have gone over my data plan in just a few days. I used 10g in 2 weeks and I hardly had it on. Help.

If you go to Settings > Cellular and look at "Use Cellular data for" each app will display the amount of cellular data used since you last did "Reset Statistics" on that screen. Also if you tap "System Services" at the bottom of that list of apps it will give details on system usage of cellular data. That may help you identify the culprit.

TM backs up way more than it "Prepares" to back up.

I've been using Time Machine without problem for some weeks now.
Today I plugged the firewire drive into my Powerbook and opened up Time Machine preferences to watch what happened (as is my practice). It did a "Preparing" phase for a normal period of time and then said it was going to back up roughly 7 MB of data. This matched my expectations.
However, when the progress bar and numeric indicator both said it had gotten that far it just kept going!
The progress bar remained at 100% and BOTH the numeric target of how much to backup and the count of how much had in fact been transferred increased together.
By the time it reached 1 GB I decided to check the Console. There were no error messages in the Console. It did however have one oddity. It said that a backup had been requested due to disk insertion (which was correct), and that a "standard" backup had started. And then, shortly after that, there was ANOTHER message that a backup had been requested by the automatic scheduler.
That may be nothing but it was the only odd thing in there.
The backup was still going -- and rather more slowly than I'm used to for large TM backups.
Eventually it completed, having transferred 4.3 GB -- way more than I expected but of course by no means anywhere close to a full system backup.
I checked the Console again and found the normal messages: 4.3 GB transferred, no pre- or post-backup thinning required, nothing deleted.
I did a Disk Utilities Verify Disk on both the main hard drive and the Time Machine drive, as well as a Repair Permissions on the main hard drive. No problems reported.
I rebooted and commanded another backup. This one completed normally having transferred under 1 MB.
So again, the only odd thing I've been able to find was the Console report of the automatic scheduler having requested a backup while a backup was already in progress due to disk insertion.
I poked around in the Time Machine itself and could find no problems with this extra large backup, the one I did after it, or any of the prior history.
So there appears to be no actual damage done, although the size of that backup remains a mystery -- as does why it didn't show up as the target amount after the "Preparing" phase.
And oh, yes, the actual space consumed on my main hard drive has not changed. So I haven't suddenly acquired 4 GB of new stuff somehow. Which means the 4.3 GB backed up must have represented changes of some sort as opposed to new stuff.
I thought that Time Machine might have somehow picked up stuff from another Mac on the LAN, but the Time Machine display does not let you select the shared portion of a networked computer so apparently not.
Anyway, another TM mystery.
--Bob

No I've done multiple, hourly incremental backups since the QuickTime update. The size of the first of those backups after applying the update was reasonable given the size of the update and the files likely altered. The incrementals after that were all modest and thoroughly in accordance with the sorts of activities I had been doing.
(For folks reading this after the fact, the backup in question happened BEFORE Apple came out with the 2007-9 security update released later that same day. Also, I've got one virtual environment file -- a Virtual PC file -- but that's around 10 GB so it couldn't have been party to this 4.3 GB mystery backup. And it wasn't touched/modified since the prior incremental anyway.)
The weird thing is the idea that "Preparing" came up with a figure that matched my expectations (around 7 MB), but then the actual backup blasted right past that and just kept climbing to 4.3 GB.
Also, there wasn't anything that I was doing during that backup that might have invalidated the "Preparing" results. I specifically wanted to sit there and watch it complete the backup after I plugged in the firewire disk. I've been looking for cases where the backup appears to get hung up during the data transfer, only to complete after an unexplained pause of a minute or so. So I plugged in the disk, opened Time Machine preferences to see what happened, and just sat there watching it.
In this case the approx. 7 MB declared by "Preparing" transferred without any significant pauses and then I marveled as it just kept going. I didn't actually do anything until it crossed 1 GB, at which point I went to open the Console to see if it had any explanation.
Another significant factor, I think, is that the speed of the transfer was fairly slow. I've done multiple GB Time Machine backups (as when that Virtual PC environment file changes), so I have a feel for how fast this firewire 800 drive will do that. And this 4.3 GB transfer was quite a bit slower.
If I had to guess, I'd say that Time Machine was doing some re-writing of stuff FROM the Time Machine disk TO the Time Machine disk (so that the firewire speeds affected the data transfer twice). But there was nothing in the Console logs that suggest anything like that was happening. Alternatively Time Machine may have been reading data across the network and transferring it to the Time Machine disk. That too would account for the speed difference. But I can find no files in the Time Machine histories indicating that anything like that might have happened.
--Bob

How to use cursor data in more than one location in form?

hi all.
is it possible to make cursor as global or public in the form so i can use its data in more than location for testing like in buttons triggers.
for example:
if i declare the following cursor in "WHEN-NEW-FORM-INSTANCE" trigger
CURSOR cur
IS
SELECT ID, NAME
FROM PERSON;how can i use this cursor in other triggers in other buttons in the form?
thanks

kareem wrote:
now i have the old data- from cursor and the new- from tableNo, you have not. When you open the cursor you get the state of the database at the current SCN.
If you
- open your cursor, fetch the data and close the cursor
- update some data
- open your cursor, fetch the data and close the cursor
you will get the updated data from your cursor the second time (unless your update isn't a uncommited autonomous transaction but I wouldn't go down that route).
You will have to save your data somewhere or you might take a look at flashback: http://download.oracle.com/docs/cd/B19306_01/server.102/b14220/consist.htm#i20759
cheers

How to use cursor data in more than one location in the form?

hi all.
is it possible to make cursor as global or public in the form so i can use its data in more than location for testing like in buttons triggers.
for example:
if i declare the following cursor in "WHEN-NEW-FORM-INSTANCE" trigger
CURSOR cur
IS
SELECT ID, NAME
FROM PERSON;how can i use this cursor in other triggers in other buttons in the form?
thanks

kareem wrote:
now i have the old data- from cursor and the new- from tableNo, you have not. When you open the cursor you get the state of the database at the current SCN.
If you
- open your cursor, fetch the data and close the cursor
- update some data
- open your cursor, fetch the data and close the cursor
you will get the updated data from your cursor the second time (unless your update isn't a uncommited autonomous transaction but I wouldn't go down that route).
You will have to save your data somewhere or you might take a look at flashback: http://download.oracle.com/docs/cd/B19306_01/server.102/b14220/consist.htm#i20759
cheers

JDBC-XI-FILE scenario. How to extract data from more than one table in JDBC

Hi,
I was asked a question like in JDBC-XI-FILE scenario........ How to extract data from more than one tables (i.e from JDBC system) ?? What is the logic to do the same ??
I am not sure whether this is a valid question..........but any help in this regards is highly appreciated.
Regards
Kumar

HI,
Yes it can be possible ,please see the following links
JDBC Receiver with Oracle Stored Procedures
configuring jdbc adapter with multiple tables
RFC -> XI -> JDBC Scenario Updating Multiple Tables
/people/alessandro.berta/blog/2005/10/04/save-time-with-generalized-jdbc-datatypes
JDBC Adapter multiple Selects
https://www.sdn.sap.com/irj/sdn/advancedsearch?query=jdbc%20with%20multiple%20tables&cat=sdn_all
Regards
Chilla..

Retrieval of Data from More Than Two tables

Hi Experts,
How to get the data from more than two tables.
By using Jdbc, and through only core java.
I mean if i entered some empid at command prompt,
then the complete data (where empid is presented at some tables like L1,L2,L3,L4.) is to be displayed.
Bye
TulsiRam Mohan.
Message #196971

Is creating view on these 4 tables is an option ?
Something like :
Select * from a
union all
select * from b
... and so on ?

I recently got the iPhone 5 and I wanted all my pictures from my 4 to transfer over .. So I logged into iCloud on my iPhone 5 and it only uploaded 335 pics.. I had way more than that.. What do I do?

I recently got the iPhone 5 and I wanted all my pictures from my 4 to transfer over .. So I logged into iCloud on my iPhone 5 and it only uploaded 335 pics.. I had way more than that.. What do I do?

You should be importing all pics taken with your iphone to your computer as you would with any digital camera. Have you failed to do this?

Solution Browser only displaying first page even data containing more than

Hello,
We would like to know delta functionalities from 4.7 Enterprise to ECC 6.0 through Solution Browser.
Solution Browser only displaying first page even data containing more than one page.
Please help us how to get all pages .
Link used :
https://websmp102.sap-ag.de/~form/sapnet?_SHORTKEY=01100035870000687322&
Regards,
Sujana

Hi,
Use the link below.....
http://solutionbrowser.erp.sap.fmpmedia.com/Default.aspx
Regards,
Krishna Kishore

Does Your Exchange Calendar Currently Show Events More Than 2 Weeks Old?

Quick question: Can you view any exchange calendar items on your Pre which you have created on your desktop and which are more than two weeks old as you read this post? I can't. After several hours of support chat and then an "elevation" to phone support, I was told by Palm telephone support that this was a new feature after Webos 1.2.1.
However, two things make me doubt that this is true:
1) Other Pre users on precentral.net report that they have installed 1.2.1 and they can still see exchange calendar events older than two weeks.
2) I noticed something really weird: I had deleted my exchange account and was re-adding it in an attempt to solve the problem. The account was syncing but I was watching my screen and it was displaying the monthly view of September, 2009. When the account was almost done syncing, I saw the calendar "flicker" a couple of times and when it did, I could see that there were all my grayed out September dates. Then it said that sync was complete and all events before 9/30/09 disappeared.
SO...I'm thinking that the data is actually in the phone but just not displaying on the calendar! That is really weird and would seem to be a true "bug" to me. For my job, I really need to be able to look back and verify what appointments occurred on what dates in the past. The Iphone and Blackberry users at my office that use the same exchange server can look back months and years at their old events.
If you are reading this could you please reply to let me know if this is a unique issue for me or whether others are having the same experience? I'd really appreciate it.
Thanks,
Joe
Post relates to: Pre p100eww (Sprint)
Post relates to: Pre p100eww (Sprint)

Very similar issue here. I am syncing my Pre with Google Mail. Don't even ASK what a hassle it was to get my Entourage contacts into Gmail and have everything populate the correct fields. A freakin' NIGHTMARE.
That said, the syncing with synergy seems to work well, with one major drawback. No calendar entries older than two months. This renders my calendar virtually useless. What is the POINT of this stupidity. I am perfectly capable of deciding if I want to use my pre's storage for older entries.
Unbelievable. I really hope palm gets it's head in gear and starts supporting its loyal users. Much more of this, and I will jump to virtually ANY other smart phone.

Prohibited entry if travel more than 2 weeks

Hi All:
Does anyone know if there is a setting that can be configures that would stop an employee from entering an expense report if the trip start date is more than 2weeks prior to the current date?
The business has asked this question, because we have some employees who do not enter their expenses in a timely manner. With this configuration, we might be able to encourage them to get their expenses entered sooner.
thanks

Hello,
As per my knowledge there are no such settings in Config. We can surely do coding to get such business requirement.
User the exit EXIT_SAPMP56T_002 to put the business logic. I have done the same check for the future date in my system and it works.
Hope this help you!
Thanks,
Vaibhav

How to keep the Recent Call Record more than a week?

How to keep the Recent Call Record more than a week? I found the iPhone only can keep the Recent Call Record for only a week.

I have to disagree with your response with respect. My i phone is limiting me to call going back only 7 days ie today is 29 July and my call log will only go back to 22 July. I have only 40 calls logged for that period. I cannot view up to the 100 you mention. I have included all calls for a single caller as well ie one caller shows 7 so ive counted that as 7 calls. There appears no way to set up to 100 in the settings
Thanks
Graham

Determine if a Calendar value is more than 2 weeks old?

I need to periodically remove entries in a RecordStore; each record contains a date. I'm coding a function that will delete records where the date stored in the record is more than 2 weeks older than the current date.
I have it done except for the filter to use in my RecordEnumeration. I am not sure how to code test to see if a date (Calendar) is 2 weeks or more older than the current date.
I know how to test to see if it's before or after the current date, but not by a certain number of days.
Any ideas?

// get today's time in milliseconds
long today       = new Date().getTime();
// Subtract 14 days multiplied by 24 hours, 60 minutes... so on.
long twoWeeksAgo = today - 14 * 24 * 60 * 60 * 1000;
for each record {
    if (myDate.getTime() < twoWeeksAgo) {
         ... delete the record
}You might want to be careful about deleting recording inside
for loop.
Secondly, you might want to directly store the long value
of date in the database.
Ajay

Time machine-- can't see more than 2 weeks back.

I recently discovered that I can't see back more than 2 weeks on my Time Machine. Last month I could see back forever, relatively speaking. My WD 320 has roughly 32GB free space left, so all the data must be there, but I can't access it. Any ideas?

Did anything unusual happen lately, such as hardware repairs, a full restore, etc.? If so, Time Machine may have had to do a very large or even full backup, requiring lots of space, so it had to delete a bunch of old backups.
Although I haven't actually verified that you and Camelot have the right answer, i'm satisfied that you both have the correct answer. Unfortunately, i'm not familiar enough with using this user-discussion group to respond correctly (i credited Camelot with a 'helpful answer' instead of 'correct answer', and i can't find my response to him).
Time Machine - Troubleshooting
for a handy widget that will display the backup messages from your logs. Use it to navigate back through recent backups, and see if there's a very large backup listing a lot of deletions. If so, copy and post the messages here.
I haven't yet been able to download this widget-- server must be super busy. I'll keep trying, later.
Thanks,
pk

Mfe sync more than 2 weeks

Sorry if I may have missed out on some thread about this but I couldnt really find anything about it here...
Is there any way to sync mfe exchange more than 2 weeks? (preferrably without tweeks... )
Its really frustrating not to be able to use the full potential of exchange due to lack om synced e-mails.

no. i know, it is frustrating too.
there is another option though!
you could set up Mfe and have it only sync the contacts and calendar and then set up your email as another seperate IMAP account.
it will seem redundant, but will still sync everything the way you need it to.

Yoga 13 Est. Ship Date Way More Than 4 Weeks

Similar Messages

Maybe you are looking for