Yoga 13 touch screen stopped working after update KB3000850, please help!

Hi, my Yoga 13 touch screen has been working fine until yesterday. The laptop came with Windows 8, and last year I upgraded to Windows 8.1 without issue. Yesterday, I installed optional update KB3000850 from Windows Update, and immediately the touch screen stopped working. I have tried the following methods, all without success:
* Uninstall KB3000850 from Windows Update
* Use Windows Restore to restore to the point before yesterday
* Re-install Intel Chipset Driver from Lenovo official driver page
* In Device Manager, uncheck all the "allow system to turn off to save power" options for the USB input devices under Human Interface Devices then restart
* Two-button shutdown and restart
* Install Lenovo Driver Manager and let it check for new drivers
* Download Cando multi touch panel driver (Note: I could not install the driver because all I got was a .cab file which does not allow me to install)
As of now my touch screen is still not working. Computer Information page from Settings shows that there is no touch or pen device for my screen.
Can anybody help me with this? Thanks!

Very true, this has been a known problem since the first day Lenovo released the Yoga 13.
I need to send Lenovo a bill for my time spent rebooting. So far i am on my 8th reboot. In the past, around 5 reboots after winddows update would work. This time... who knows.
Of course it always happens when you have a deadline.
Please post back if you have found a better soultion than system restore.
Thanks for posting this issue. More users need to bring this to Lenovo's attention.

Similar Messages

HT201371 Touch ID stopped working after updating to IOS 7.1.

Good morning to all,
My touch ID stopped working after updating to IOS 7.1.
It was working perfectly until the update and then it stopped recognizing my prints
I've reset the phone and deleted my fingerprints and now I can't even add a fingerprint again.
I am sure this is not a hardware problem since the phone was working perfectly before the update and it didn't fall nor anything similar.
Also the sensor is clean as well as my fingers.

Same problem... I think we all should let Apple know of this issue. http://www.apple.com/feedback/ tell them the probelm. So when they get too many complains they will surely fix it ASAP with a software update.

Touch screen not working after update

Hi, I am using Sony laptop which have the model name: SVF14N11CXB. Till yesterday it was working fine, when I shut it down it did its mandatory update. However, today when I start it up its touch stopped working, Although this laptop is touch supported and till now the touch screen was working perfectly but today when I searched in the computer properties it is showing that this laptop is not pen or touch supported. I restored my laptop to factory default but still it is not working and making me go crazy. Please help me in this regard.
Thanks.

Hi Pirat3,
Welcome to Sony Community!
We regret to hear that the touch screen feature is not working anymore. You're right this laptop has a touchscreen function. Click here for more information. You mentioned that you reformat the computer back to factory default, if done properly the computer should be back up and running the way it was when you first got it (including the touch feature). Kindly visit this website and reformat again the computer back to default setting. Please follow thr instructions there carefully.
Keep me posted.
Thanks,
Jen
If my post answers your question, please mark it as "Accept as Solution"

My HP Envy touch screen stopped working after getting an HP Bios update yesterday

Can someone please tell me how to fix my touch screen. I received an HP BIOS update which caused my touch screen to stop working. I've tried re-calibrating it but it won't accept my touch which tells me the screen is no longer enabled.
I tried finding where to enable and could not find where to enable finger touch. I've also tried looking for driver updates and the driver appears to be up to date.
Thanks
This question was solved.
View Solution.

I have a different type of TouchSmart, but this may work for you:
Press the Windows logo key + X (if using a Windows 8 computer -- if Windows 7, click the Start button, type Device Manager, and click Device Manager in the search results).
Select Device Manager from the list.
Click the little arrow next to Human Interface Devices to expand the list.
Click the touch screen driver (in my case, NextWindow Voltron Touch Screen).
Right-click, and select Enable from the list.
Click Yes if a dialog box asks if you are sure you want to enable the touch screen driver.
On some models, it isn't obvious which device in the list controls the touch screen. I have read in other posts that some people have fixed the problem by disabling and re-enabling each device.
If that does not work, you might try going to hp.com (http://www8.hp.com/us/en/support-drivers.html) and clicking Drivers & Downloads.
In the search field, enter your product name or number, and then click Go. Select your operating system from the drop-down list under Select your operating system, and then click Next. If there are any available graphics drivers under Select a download below, click the plus sign next to Driver - Graphics, and then click the driver name. In the Download options and information window, click Download . Follow the onscreen directions to download the driver. Restart the computer.
~Lil.Liebe
Clicking the white KUDOS THUMBS UP on the right is a way to say thanks!
Click Accept as Solution on a reply that solves your issue to help others in search of answers.

Aspire R7 572G touch screen stopped working after a windows 10 upgrade, pls help

I did a windows 10 update, but to my dismay I lost my touchscreen functions. I checked the properties on MY COMPUTER and it now says, pen and touch input not supported. Help pls

Hmmm.. I upgraded my R7 572G but my touch screen is ok. I'm not sure what you did. However, my problem was the screen does not auto-rotate in Windows 10. So I went to this folder to run as administrator to fix the auto rotate problem and it works. C:\OEM\Preload\FIXAUTOROTATE\EnableRotate.cmd

All USB stops working after restarting iMac, please help!

I am having a serious problem with my iMac and i'm at a loss of what to do. I have a 24" imac with 10.5.6 and about a week or two ago I restarted my computer only to find that none of my USB ports were working. I thought it was a fluke so i just restarted again, only to find out that they still wernt working. I was forced to do a restore because I couldn't find a fix so I booted up from my leopard disc and did a restore from my time machine backup. I thought all was well and good until i restarted again yesterday. The same exact thing happened so I did another restore. Well, I just needed to restart my computer again and what do you know, my USB stopped working again! I have repaired permissions, done the apple hardware test, reset the PRAM, and verified the disc to see if there was anything wrong with it. I am at a total loss on what to do and Im really not looking forward to doing another restore only to have it do the exact same thing. Please help!

If you haven't tried this, try resetting the SMC: http://support.apple.com/kb/HT1543?viewlocale=en_US
When you booted from the restore disk, did you run Disk Utility to check the hard disk for errors?
If not... make sure and disconnect anything connected to the USB ports first,
To check the hard disk:
Open Disk Utility, in the Utilities folder in the Applications folder.
Insert your Mac OS X Install disc in your computer’s optical drive or an optical drive connected to your computer, and then restart your computer. When you hear the startup tone, hold down the C key until you see the progress indicator, which looks like a spinning gear.
Follow the onscreen instructions until the Menu Bar appears with the Utilities menu in it, choose Utilities > Disk Utility, click First Aid, and then click the Verify button. If DU reports errors, click Repair. When it's finished, from the Menu Bar, select Utilities/Startup Disk. In the Startup Disk window select MacintoshHD 10.x.x and click Restart.
Also, click the Apple logo top left in your Desktop, click: About This Mac, then click: More Info
That will launch your System Profiler. Under Contents on the left, click: USB and make sure your USB information is there.
Carolyn

Free app not working after update. Please help

Yesterday, my daughter downloaded an update to a free app that she has on a first generation iPod Touch. The update was successful, but now it won't load up at all. We tried restoring the system from a previous backup and reinstalling the app, but alas, no joy. Does anyone know if previous versions of a free app can be found anywhere. Her iOS is 3.1.3 so pretty antiquated I know. Many thanks.

-Try here:
iOS: Troubleshooting applications purchased from the App Store
- You can only purchases the current version of apps that are in the App store. Pevious versions are not availalbe.
- The ony way to get a previous version is if you happen to have one in a coupter file backup.

Photo shop elements stopped working after automatic download, please help?

Bar appeared as I was working on a photo. Downloaded something on my elements program. now it does not work?

Hi,
I can't think what would require a download. Occasionally some of the special effects need to be downloaded when you use them for the first time but you appear to not be trying anything new - "you've done it hundreds of times".
Probably the first thing to try is to reset the preferences.
Hold down the Ctrl, Alt and Shift key as you launch the editor and hold them down until you get the message about resetting the preferences - which you do.
If you have changed any of the preferences, like allow floating documents, you will have to set them again.
I don't think the backup should have caused this problem.
Have you used it successfully since the backup and before the failure - or was this the first edit of the day?
Brian

My Ipod touch email stopped working after installing Update

my Ipod touch email stopped working after installing the latest firmware update from Apple what should I do?

Hi, jewlssch.
Thank you for visiting Apple Support Communities.
If the Mail application will not launch, I would recommend processing any available updates on your Mac Pro and test launching Mail. If the issue persists, process a reinstall of Mavericks.
Reinstall OS X
http://support.apple.com/kb/PH10763
Make sure to backup all of your data prior to reinstalling OS X 10.9.
Back up your Mac
http://support.apple.com/kb/PH11371
Cheers,
Jason

Why did my brand new Ipod 5g 32gb touch screen stop working?

So I got this ipod from the Genius Shop for about a month. A few days ago when IOS 7.1 came out, I updated it. However, the ipod seems to lag a little. Today, I was charging my ipod and for some reason, when I turn it on, the touch screen stop working (the ipod is in perfect condition). The home button, volume button and the on/off button all works fine except for the touch screen. I want to restore everything on my computer, but I can't get pass the lock screen (the touch screen seems to stop working). I just can't do anything on this ipod anymore beside turning it on and off. I can't even power it off because the touch screen is no longer touchable. So how can I restore everything, or do something about this ipod to work again. Can I still take this back to the Genius Shop and get another one without additonal charge?

If the reset does not work try the remaining items of:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try another cable
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

Ipod nano 6th gen touch screen stopped working please help

Everything on the ipod nano 6th gen is working except the touch screen and once it goes to sleep i have to hold the sleep button and the volume down button to turn it back on. I went into the volume -, sleep, volume + menu and went through the tests and in the touch panel error check section it says i have IC error reported: 0xFFFFFFFF. Please help as i have reset and restored and update itunes etc. Do i need to send it in to apple? The touch screen was working at one stage and then i disconected from the computer while it said eject first (this is when the touch screen stopped working) and put the ipod on a different computer. The first computer was windows 7 which i used just to charge it a little and the second one im using is windows vista.

I have had the same problem and changed three Nano's. Each time the fault is diagnosed by Apple as "water damage".
If you take your Nano to one of their maintenance centres they will look into either the headphone socket or the power dock and and tell you that you have infringed the warranty by somehow getting the thing wet.
Basically is a poorly designed piece of kit whereas a simple shuffle is way more robust.
I have given up with my Nano and am now using an old model

Earpiece stopped working after updating to 5.0.1.

It worked fine the night before. Then it stopped working after updating to 5.0.1. I can only hear calls on speaker. Did anyone else have this problem. I have tried all the fixes, restart, reboot, restore. No debris in the headphone jack, and when volume is turned up or down it doesn't show headphones on the screen. Nothing covering the earpiece. Tried to blow out headphone jack with compressed air. I'm thinking it is a glitch in the software. Using Iphone 4 on Verizon. Any thoughts or ideas?

you can try reading the posts listed to your right in the "More Like This" box or by searching this forum.

Sony vaio SVF14N16SGS TOUCH screen stop working suddenly help me to fix this

hi alli buy sony vaio SVF14N16SGS and calibrate a touch screen i working with laptop but approximately befor 20 minute laptop touch screen stop working suddenly!!!!!!!!!!!!!i am very disapointment from sony Corporation for this bull******e bug please help me to fix iti appreciate it

Hi Jimmy_N,
Thank you for considering Sony Community!
We're sorry to hear this issue. Please follow the troubleshooting steps here to isolate the issue:
Power cycle - Remove the battery and all peripherals -> press and hold the power button for 5 seconds OR, if the battery is not removable, remove all peripherals-> look for a battery off button on the bottom of the laptop -> push the button for 5 seconds
Reinstall driver - Go to Device manager -> Human Interface Devices -> right click and select Uninstall (DO NOT DELETE). Restart the computer. The driver will be reinstalled.
Reset BIOS - While the unit is restarting, tap the F2 key repeatedly. Once in BIOS go to Exit tab -> Get Default Values -> Save the changes and Exit.
Update drivers from Sony's support website or from where you purchased the laptop.
Your Vaio SVF14N16SGS is not a U.S. model. We do not have the drivers and software that support your computer. For further assistance regarding your concern, please contact the Sony offices/Sony representative offices nearest to your place of residence in Asia Pacific region http://www.sony-asia.com/countryselector.html?hpid=countryselector:AsiaPacific. Due to proximity, they are in a better position to respond to your questions or concerns.
Hope these help.
Thanks,
Vincent
If my post answers your question, please mark it as "Accept as Solution"

Touch screen stopped working on iPhone 5

Hi guys,
My brother is using iPhone 5 in iOS 8.0.2 v and suddenly his phone start searching for the antenna and the touch screen stopped working (I can't even side to unlock )!! The screen will be on still the phone reset automatically and when is up it will search again for the antenna and every steps repeat all overThe screen Really got confused what had happened to phone. Even I try to reset it by holding Power bottom and Home bottom after resetting nothing has changed. Also the bottoms stopped working while the screen is on (when I'm holding the Power bottom it won't show me to side for power off )
Every time I had a problem I posted my problem here, but i got nothing from anyone, if is it for my bad English I'm sorry but I really need some help here.
What can I do!?
Thanks

First, try to reset the phone by holding the sleep and home button for about 10sec, until the Apple logo comes back again. If this does not work, set it up as new device without using the backup, in case it contains corrupt data causing this problem.
How to back up your data and set up as a new device
If still no luck, get it serviced by Apple:
Apple - Support - Service Answer Center

Touch Screen stops working while charging

Hi All,
I have just purcahsed a Torch 9810 and have uploaded it with latest OS 7.1. I am facing problems like :
1. The touch screen stops working while the phone is getting charged.
2. The screen gets hanged very frequently. Should we use it very calmly or is it hanging because we use it too fast. For this condition,solution i am left with is a HARD RESET. But till when this will help. Please suggest some work around.
3. When i select Loud profile,for sometime it works and after that it stops working. I try to ring it manually by going to LOUD profile sound settings and pressing the TRY IT option. I do use a cover. Does it makes any difference ? The problem goes when i do a HARD RESET. But why is this happening ? Any Other setting neds to be done ?
Please HELP or Suggest what to do !!!!!
Regards,
Ronak Gupta

This is probaly a software problem in my opinion this could probably be resolved at the genius bar in any apple store also your phone should be under warranty as it is a iphone 5 and they did not come out not so long ago so in other words go to a apple store and they might have to replace the phone. In my experience this has nothing to do with the cable but a software issue in ios did this issue happen in any earlier version of ios

Yoga 13 touch screen stopped working after update KB3000850, please help!

Similar Messages

Maybe you are looking for