Yoga 13 Win 7 Drivers

Hi All,
I have been trying for a long time to try and get Win7 (64bit) drivers installed but to no success for my wireless network on my Yoga 13.
I know form reading on here that there have been a lot of people putting windows 7 on as dual boot or solo installs.
I have tried searching on the Reltek website and trying there generic driver and also the windows 8 driver from Lenovo as well as searching windows update but no drivers will work.
When I fors a driver on it just says Failed to start code 10.
Please can you one who has put windows 7 on their Yoga 13 please help me in my quest to try and find a driver that works.
Also if there is some info on where I can ge the other drivers for windows 7?
Thanks for your help.
Silvio

Officially Windows 7 isn't supported on the Yoga 13. I would recommend using OneKey and restoring Windows 8, upgrade to Windows 8.1, install any necessary 8.1 drivers, and using a Windows 7 virtual machine if you need to keep Windows 7 around. Learn to use Windows 8.1 as your primary desktop...

Similar Messages

Hello, i own an i7 all in one mac. I tried to partition him using bootcamp but didn't have mac os cd neither mac instalation. the problem i am dealing now its that i cant go back to OS partition since its not appeared when i restart c and no win drivers

I tried to partition him using bootcamp but didn't have mac os cd neither mac instalation. the problem i am dealing now its that i cant go back to OS partition since its not appeared when i restart c and no win drivers to have a properly running system. I've thought as an option to re-download boot-camp and run the instalation from windows partition and see if i can repair it that way, didnt try yet thought just in case anyone has a better prposition or dealed with the same problem

Take it to your local Apple Store or AASP, it's covered by a 1 year hardware warranty. If you have AppleCare then give them a call but I'm pretty sure they will advise the same. If you have not purchased AppleCare yet please do, this will extend the warranty to 3 years however it MUST be purchased within the first year of ownership. Let it go 366 days and you are out of luck. AppleCare will also include telephone support too.
Good luck.

HT3986 when installing win 7 pro on my macbook pro retina and win drivers that download from bootcamp the USB ports not works

please som eone help me to make the USB ports on my macbook pro retina works, as its stopped just when using win 7 pro after complete installing the win drivers

I catch the point;
I was opned device manager on windows then found devices unlnown ( USB3) as the boot camp downloaded from the internet not define this USB3 port, so, I installed it by searching online for this drivers.

Help with Boot Camp Drivers

Sorry if this is in the wrong section, but I need to know. I have been trying unsuccessfully for about a month now, and I cannot get Boot Camp drivers to work. I have consulted many guides from the internet, gone to a Mac Store for support, no help from either.
I am running on a new Macbook 13 inch with OS X 10.5.6. I have installed Windows XP with SP2 built in, and I have tried installing the drivers with the Leopard CD, with a downloaded drivers CD from a website, but it still doesn't work. I have no idea what I am doing wrong, but none of the drivers work. I see the Boot Camp Control Panel, but the only tabs it has is Power, Brightness, Restart in ..., and Remote. If anybody could help me with installing these drivers, it would be greatly appreciated.

Run Bootcamp assistant and choose to download the (correct) Win drivers for your machine on a USB drive. Then stop the Bootcamp install and go to install the drivers in Win.
Cheers
Simon

WoW + Wine crashes, seems to be sound related

I've been trying to get Wow to run in Wine, and I'm running into a few problems. I'm using the latest nVidia drivers, wine-git from the AUR, and WoW is all patched up. I boot into WoW and it seems to work fine for a few minutes. Then, all of a sudden, it will crash. It seems to crash right after Amarok changes songs. I have Amarok playing through Pulseaudio, and I've tried WoW with both Pulseaudio+OSS Wine drivers and just straight ALSA Wine drivers.
Here is the console output I get:
archive Data\enGB\expansion2-speech-enGB.MPQ opened
fixme:win:EnumDisplayDevicesW ((null),0,0x33e8a0,0x00000000), stub!
err:d3d_surface:surface_modify_location Surface 0x16056938 does not have any up to date location.
fixme:keyboard:X11DRV_ActivateKeyboardLayout 0x4090409, 0000: semi-stub!
fixme:keyboard:X11DRV_ActivateKeyboardLayout 0x4090409, 0000: semi-stub!
fixme:keyboard:X11DRV_ActivateKeyboardLayout 0x4090409, 0000: semi-stub!
fixme:keyboard:X11DRV_ActivateKeyboardLayout 0x4090409, 0000: semi-stub!
fixme:keyboard:X11DRV_ActivateKeyboardLayout 0x4090409, 0000: semi-stub!
wine: Unhandled page fault on read access to 0x00000938 at address 0x7e18f2d8 (thread 0009), starting debugger...
Unhandled exception: page fault on read access to 0x00000938 in 32-bit code (0x7e18f2d8).
Register dump:
CS:0023 SS:002b DS:002b ES:002b FS:0063 GS:006b
EIP:7e18f2d8 ESP:0033f3d4 EBP:7c80ada8 EFLAGS:00010216( R- -- I -A-P- )
EAX:00000000 EBX:00000000 ECX:f75a3140 EDX:7be0c000
ESI:7c786800 EDI:7be0c000
Stack dump:
0x0033f3d4: 00000000 bf031ae1 be977d5e 3e34a734
0x0033f3e4: 3eb05fea 3ef62931 3e34a734 00000000
0x0033f3f4: 00000000 bf5be16f 00000000 bf031ae1
0x0033f404: 3f800000 3e34a734 00000000 3ef62931
0x0033f414: bf031ae1 00000000 bf5be16f bf5be16f
0x0033f424: 3f800000 00000000 3e34a734 3e34a734
000c: sel=0067 base=00000000 limit=00000000 32-bit --x
Backtrace:
=>0 0x7e18f2d8 in libnvidia-glcore.so.260.19.21 (+0xe2b2d8) (0x7c80ada8)
1 0x00000000 (0x046fb260)
0x7e18f2d8: movl 0x938(%eax),%eax
Modules:
Module Address Debug info Name (136 modules)
PE 400000- f60000 Deferred wow
PE 3c8f0000-3d6fcb42 Deferred battle.net
PE 78130000-781cb000 Deferred msvcr80
ELF 79608000-7961d000 Deferred psapi<elf>
\-PE 79610000-7961d000 \ psapi
ELF 7961d000-796bd000 Deferred crypt32<elf>
\-PE 79630000-796bd000 \ crypt32
ELF 796bd000-79838000 Deferred libcrypto.so.1.0.0
ELF 7ab01000-7ab59000 Deferred dbghelp<elf>
\-PE 7ab10000-7ab59000 \ dbghelp
ELF 7ab59000-7abe2000 Deferred msvcrt<elf>
\-PE 7ab70000-7abe2000 \ msvcrt
ELF 7ac33000-7ac75000 Deferred libldap_r-2.4.so.2
ELF 7ac83000-7acaa000 Deferred winhttp<elf>
\-PE 7ac90000-7acaa000 \ winhttp
ELF 7acaa000-7ad00000 Deferred wldap32<elf>
\-PE 7acb0000-7ad00000 \ wldap32
ELF 7ae12000-7ae32000 Deferred iphlpapi<elf>
\-PE 7ae20000-7ae32000 \ iphlpapi
ELF 7b633000-7b64d000 Deferred libgcc_s.so.1
ELF 7b64d000-7b664000 Deferred libnsl.so.1
ELF 7b664000-7b68a000 Deferred libvorbis.so.0
ELF 7b68a000-7b800000 Deferred libvorbisenc.so.2
ELF 7b800000-7b97f000 Deferred kernel32<elf>
\-PE 7b810000-7b97f000 \ kernel32
ELF 7b985000-7b9d4000 Deferred libflac.so.8
ELF 7b9d4000-7ba11000 Deferred libdbus-1.so.3
ELF 7ba11000-7ba76000 Deferred libsndfile.so.1
ELF 7ba76000-7bac0000 Deferred libpulsecommon-0.9.22.so
ELF 7bac0000-7bb00000 Deferred libpulse.so.0
ELF 7bc00000-7bcb9000 Deferred ntdll<elf>
\-PE 7bc10000-7bcb9000 \ ntdll
ELF 7bcbe000-7bcca000 Deferred liblber-2.4.so.2
ELF 7bcca000-7bd8f000 Deferred libasound.so.2
ELF 7bd8f000-7bdc5000 Deferred winealsa<elf>
\-PE 7bda0000-7bdc5000 \ winealsa
ELF 7bdc5000-7be0c000 Deferred dsound<elf>
\-PE 7bdd0000-7be0c000 \ dsound
ELF 7be52000-7be83000 Deferred libcrypt.so.1
ELF 7be83000-7becb000 Deferred libcups.so.2
ELF 7bed3000-7bee8000 Deferred midimap<elf>
\-PE 7bee0000-7bee8000 \ midimap
ELF 7bee8000-7bf00000 Deferred msacm32<elf>
\-PE 7bef0000-7bf00000 \ msacm32
ELF 7bf00000-7bf03000 Deferred <wine-loader>
ELF 7bf07000-7bf14000 Deferred libxi.so.6
ELF 7bf14000-7bf29000 Deferred libresolv.so.2
ELF 7bf4d000-7bf80000 Deferred uxtheme<elf>
\-PE 7bf50000-7bf80000 \ uxtheme
ELF 7c005000-7c00a000 Deferred libattr.so.1
ELF 7c34f000-7c354000 Deferred libogg.so.0
ELF 7c354000-7c358000 Deferred libcap.so.2
ELF 7c358000-7c35d000 Deferred libasyncns.so.0
ELF 7c35d000-7c361000 Deferred libxcb-atom.so.1
ELF 7c361000-7c366000 Deferred libxtst.so.6
ELF 7c366000-7c36b000 Deferred libasound_module_pcm_pulse.so
ELF 7c46c000-7c46e000 Deferred libx11-xcb.so.1
ELF 7c46e000-7c477000 Deferred librt.so.1
ELF 7c5b1000-7c5b6000 Deferred libxfixes.so.3
ELF 7c5b6000-7c5bf000 Deferred libxcursor.so.1
ELF 7c5c0000-7c5c6000 Deferred libnss_dns.so.2
ELF 7c5f4000-7c69c000 Deferred winex11<elf>
\-PE 7c600000-7c69c000 \ winex11
ELF 7c81e000-7c847000 Deferred libexpat.so.1
ELF 7c847000-7c875000 Deferred libfontconfig.so.1
ELF 7c875000-7c8fa000 Deferred libfreetype.so.6
ELF 7c8fa000-7c901000 Deferred libxrandr.so.2
ELF 7c901000-7c909000 Deferred libxrender.so.1
ELF 7c92f000-7c955000 Deferred msacm32<elf>
\-PE 7c940000-7c955000 \ msacm32
ELF 7c955000-7c9e9000 Deferred winmm<elf>
\-PE 7c960000-7c9e9000 \ winmm
ELF 7c9e9000-7c9fd000 Deferred hid<elf>
\-PE 7c9f0000-7c9fd000 \ hid
ELF 7c9fd000-7ca34000 Deferred winspool<elf>
\-PE 7ca00000-7ca34000 \ winspool
ELF 7ca34000-7ca92000 Deferred setupapi<elf>
\-PE 7ca40000-7ca92000 \ setupapi
ELF 7ca92000-7cb94000 Deferred ole32<elf>
\-PE 7cab0000-7cb94000 \ ole32
ELF 7cb94000-7cc84000 Deferred comctl32<elf>
\-PE 7cba0000-7cc84000 \ comctl32
ELF 7cc84000-7ce70000 Deferred shell32<elf>
\-PE 7cc90000-7ce70000 \ shell32
ELF 7cece000-7ced1000 Deferred libxcomposite.so.1
ELF 7ced1000-7ced6000 Deferred libxxf86vm.so.1
ELF 7ced6000-7ced9000 Deferred libxinerama.so.1
ELF 7ced9000-7cf4d000 Deferred rpcrt4<elf>
\-PE 7cef0000-7cf4d000 \ rpcrt4
ELF 7cf4d000-7cf86000 Deferred dinput<elf>
\-PE 7cf60000-7cf86000 \ dinput
ELF 7cf86000-7cfa0000 Deferred dinput8<elf>
\-PE 7cf90000-7cfa0000 \ dinput8
ELF 7cfa0000-7d002000 Deferred shlwapi<elf>
\-PE 7cfb0000-7d002000 \ shlwapi
ELF 7d002000-7d025000 Deferred mpr<elf>
\-PE 7d010000-7d025000 \ mpr
ELF 7d025000-7d03a000 Deferred libz.so.1
ELF 7d041000-7d06f000 Deferred ws2_32<elf>
\-PE 7d050000-7d06f000 \ ws2_32
ELF 7d06f000-7d0cd000 Deferred wininet<elf>
\-PE 7d080000-7d0cd000 \ wininet
ELF 7d0cd000-7d0ed000 Deferred imm32<elf>
\-PE 7d0d0000-7d0ed000 \ imm32
ELF 7d0ed000-7d224000 Deferred wined3d<elf>
\-PE 7d100000-7d224000 \ wined3d
ELF 7d224000-7d23c000 Deferred libxcb.so.1
ELF 7d23c000-7d24a000 Deferred libxext.so.6
ELF 7d24a000-7d364000 Deferred libx11.so.6
ELF 7d364000-7ea15000 Export libnvidia-glcore.so.260.19.21
ELF 7ea15000-7ea2c000 Deferred libice.so.6
ELF 7ea2c000-7eaf5000 Deferred libgl.so.1
ELF 7eaf7000-7eb2a000 Deferred d3d9<elf>
\-PE 7eb00000-7eb2a000 \ d3d9
ELF 7eb2a000-7ebdc000 Deferred opengl32<elf>
\-PE 7eb40000-7ebdc000 \ opengl32
ELF 7ebdc000-7ec36000 Deferred advapi32<elf>
\-PE 7ebf0000-7ec36000 \ advapi32
ELF 7ec36000-7ecc1000 Deferred gdi32<elf>
\-PE 7ec40000-7ecc1000 \ gdi32
ELF 7ecc1000-7edf3000 Deferred user32<elf>
\-PE 7ecd0000-7edf3000 \ user32
ELF 7efa6000-7efcb000 Deferred libm.so.6
ELF 7efd0000-7efd5000 Deferred libxdmcp.so.6
ELF 7efd5000-7efdc000 Deferred libsm.so.6
ELF 7efdc000-7eff4000 Deferred version<elf>
\-PE 7efe0000-7eff4000 \ version
ELF 7eff4000-7f000000 Deferred libnss_files.so.2
ELF f7410000-f7413000 Deferred libxau.so.6
ELF f7413000-f7415000 Deferred libnvidia-tls.so.260.19.21
ELF f7417000-f741b000 Deferred libdl.so.2
ELF f741c000-f7420000 Deferred libuuid.so.1
ELF f7450000-f759c000 Deferred libc.so.6
ELF f759c000-f75b6000 Deferred libpthread.so.0
ELF f75b6000-f76f6000 Deferred libwine.so.1
ELF f76f7000-f7715000 Deferred ld-linux.so.2
Threads:
process tid prio (all id:s are in hex)
00000008 (D) C:\users\Public\Games\World of Warcraft\Wow.exe
00000015 0
00000019 0
0000000c 0
0000001a 0
0000000d 0
0000000b 0
00000047 0
00000046 0
00000045 0
00000044 0
00000043 0
00000042 0
00000041 0
00000040 0
0000003f 0
0000003e 0
0000003d 0
0000003a 0
00000039 1
00000038 0
00000037 1
00000031 0
00000030 0
0000002f 0
0000002e 0
0000002d 2
0000002c 15
0000002b 15
00000029 0
00000028 0
00000027 0
00000026 0
00000025 0
00000024 0
00000023 0
00000022 0
00000021 0
00000020 0
0000001f 0
0000001e 0
00000009 0 <==
0000000e services.exe
00000014 0
00000010 0
0000000f 0
00000011 winedevice.exe
00000018 0
00000017 0
00000013 0
00000012 0
0000001b explorer.exe
0000001c 0
Backtrace:
=>0 0x7e18f2d8 in libnvidia-glcore.so.260.19.21 (+0xe2b2d8) (0x7c80ada8)
1 0x00000000 (0x046fb260)
err:seh:raise_exception Unhandled exception code c0000005 flags 0 addr 0x7e16e920
wine client error:9: read: Bad file descriptor
Any ideas as to what may be causing this issue?
EDIT: I also noticed that it seemed to happen after I pushed down my Push to Talk button in Mangler.
Last edited by whackedspinach (2010-12-06 22:30:45)

I also crash if I attempt to use alt-tab at all.

Problem reading SD card on T400/Win XP Pro SP3

I have an SD card, which reads just fine on an olde T61. When I insert it into T400, I can browse the contents of the folders with no previews. When I am trying to copy a picture from the card to the computer, I have error message:
"Cannot copy <name>: The path is too deep."
I have all the updates installed through Lenovo update tool, and all windows updates installed as well.
Is there a solution to this problem? Has anyone experienced something similar?
Thanks

I just got off the phone talking with Lenovo rep. He suggested the problem is caused by some incompatibility of SP3 with the SD card driver. The suggested fix is to follow the instructions here:
http://social.technet.microsoft.com/Forums/en-US/itproxpsp/thread/b435c934-112b-4142-8bc5-496482c2c8...
Did anybody try this? I am quite hesitant to mess manually with the Win drivers. Any more ideas?
It seems strange, because the problem on that forum was reported in January, and apparently it has not been addressed by MS/Lenovo since then, with some automatic update.

Vista Drivers for Apple Bluetooth Keyboard in BootCamp?

I have a MacBook Pro 2.4, OSX 10.5.1, and have installed Boot Camp with Vista Ultimate.
I also have the Apple Bluetooth keyboard that has the numerical pad.
My keyboard works well but I cn not get the numerical pad to work.
I suspect it might be drivers for the keyboard.
I have installed the Leopard Win drivers for Boot Camp.
No luck
Any thoughts out there?
Dunc

Never mind,,,,,
I found an unmarked "Num Lock" key on the keyboard.
am a happy camper now!

Yoga 11e + SCCM driver PAck / Touchscreen

Yoga11e touchscreen non functional after imaging with sccm + lenovo driver pack. Still trying to figure out why.

Both of those drivers are in the SCCM driver pack. Are you using SCCM or MDT to do the deployment?
If SCCM, what version of SCCM and did you use the Auto Apply Driver or the Apply Drivers task item?
If MDT, did you specify the drivers in a selection profile that just has the Yoga 11e drivers and did you check the box to apply all the drivers in the profile?

Drivers for OpenSolaris

I've installed OpenSolaris 2008.05 on my Desktop PC; i've also installed, connected to the Internet with an UTP cable, all the packages for gcc.
Afterwards I tried to build a driver for an USB Wireless Adapter (Sitecom WL-142), using the file ndis-1.2.tar.gz and the Win drivers.
Following the file "How to build Wi-Fi drivers for OpenSolaris,txt", when I issue the command # make ndiscvt I get a list of errors.
Can anyone give me help or other ideas?

You posted this to a Hardware forum.
You have an issue with an OS that you've selected to use, not with your hardware.
I suggest you leave the post in the other forum web site active,
and hope for guidance over there.
[http://www.opensolaris.org/jive/thread.jspa?threadID=124401|http://www.opensolaris.org/jive/thread.jspa?threadID=124401]
[Sunblade 1500 systems|http://sunsolve.sun.com/handbook_pub/validateUser.do?target=Systems/eolSystemList&source=] were discontinued long before OpenSolaris was ever available. [An installable release of OpenSolaris wasn't available until 2008|http://en.wikipedia.org/wiki/Opensolaris#History] and no hardware manufacturer will to go backwards and make any effort to write device drivers. Neither can any hardware manufacturer be expected to go backwards and qualify a new OS for some computer model they havent made in years.
If there is no native support for the card (perhaps with a reconfiguration reboot?), then you can only hope for someone in the OpenSolaris community may want to write one for you. Your best hope would be to stay with the OpenSolaris Forums web site. There is nothing "OpenSolaris" here.

My report on installing Windows 7 RC x64 on my lenovo X200 (Still some help needed!)

I upgraded from Vista and for a brief moment everything seemed to work but then problems started and I did a clean install. BUT there are quite some issues:
- Unknown PCI Simple Communications Controller in Device Manager (Which drivers are needed?)
- Intel GMA driver reports to be installed but I don't have the Settings app to change power saving things and I don't have the GPU video acceleration as well as some problems with 3D Games (QuakeLive)
- Fans seem to spin more than under Vista. Not sure about that one. (Have to observe with new drivers from lenovo)
Fixed:
- Can't install Bluetooth driver (No Device found) - Installed the OSD Package following a guide posted somewhere on the board (manual registry key added, installed in vista mode) and could then enable BT using the Fn Keys and the Drivers were installed automatically by Wind7 after that
- Fn+F2 (Lock) does not work, Fn+F5 (WiFi&Bluetooth) does not work - Same fix as BT issue
- Brightness change does not show the green onscreen bar, does not work after sleep - Fixed through the Hotkeys Driver for Win7 (provided by lenovo on the Win7 Beta Drivers page)
- Power Manager - New Drivers for Win7 by lenovo
Doesn't work but it's crap anyways:
- Presentation Director won't install correctly
Doesn't work but not important:
- Audio Driver from lenovo only worked after "Install with recommended Settings" and the SmartAudio pane in the Control Panel does not work so I uninstalled and the Win drivers work perfectly
- Fn+Pause (doesn't do anything)
- Fn+PrtSc (doesn't do anything)
- Intel AMT wouldn't install (I'm not in an Enterprise Environment so I don't need it anyways)
What works:
- Active Protection
- Camera (at least it installed. Didn't try it out)
- All other Fn Keys, Volume Buttons, Onscreen Display of volume/ThinkLight change
- Intel Matrix and Turbo Memory drivers installed
- lenovo System Interface installed
- WLan (Out of the box and after I killed it with the deinstallation of Access Connections, worked again with Intel drivers)
- Fingerprint (Win Update)
- Chipset (Win Update)
- LAN (Win Update)
- Display (Win Update)
- Power Management Driver (Win Update)
- Trackpint (Win Update)
- Audio (Out of the box)
- Modem Drivers installed
Untested/Not Installed:
- Easy Eject Utility (Not needed anymore with new Win7 Driver behavior)
- ThinkVantage Menu & Message Center
- Access Connections
It works quite well but the GMA and Brightness issues are really annoying! BUT I hate it, that the System Update App isn't available anymore and stopped working with Vista SP2 (RC). One app which manages all the Driver and support software installation is just perfect! I hope lenovo will release something like it again (Maybe as a sidetab in the official Win7 Update app )
Does someone know how I can fix the the red problems?
Thank you.
Message Edited by Chrigi on 05-28-2009 01:11 PM
Message Edited by Chrigi on 06-06-2009 03:42 AM

Grüezi Christian:
I did a clean installation (as opposed to an upgrade) of W7 RC on my W500, and discovered that all of the problem you mention are quite easily solved. Basically, they seem to be caused by the computer needing the correct device driver for the item - in other words, the device driver is not provided on the W7 CD, you need to get it from the Lenovo website.
In your case, because you did an upgrade install (rather than wiping your hard drive and doing a clean install), chances are that you already have the required drivers present on your computer. They will be located at the root level of your 'C:' drive in a folder entitled 'drivers' (in other words, C:/drivers/).
All you have to do is point your computer in the correct direction, to assist it to find the driver that is present on your hard drive.
Here is how I recommend you proceed:
1) Open the Device Manager. In W7, you can accomplish this from the control panel (Start - Control Panel - Device Manager).
2) Look for an item in the device manager that the computer is unhappy about. These are normally identified with exclamation points or similar icons beside them.
3) Right-click on one of these problem items, and choose 'Update Driver Software'.
4) Select the lower option (the non-default option), which is 'Browse my computer for driver software'.
5) In the window that appears, use the browse button to navigate to C:/Drivers, and confirm that the check box 'include subfolders' is checked.
6) Press the NEXT button. The computer will then go fishing through the C:/Drivers folder, find what it needs, and install it.
You will have to iterate this procedure for each item in the device driver list that shows a problem. It may also be necessary to reboot the computer after each iteration.
Hopefully, this will solve your problems. Please let us know what your experience is.
gruss,
Michael
Message Edited by PanEuropean on 05-17-2009 01:35 PM
W520 (4270 CTO), which replaced a W500 (4062-27U), which replaced a T42P, which replaced an A21P...

N9A2 Platinum, Installing XP Pro, SP2, Cannot find SATA Hard Drives

I am lost here. I cannot get the bios to recognize the HDs as SATA drives, and XP Pro does not find the HDs (of course), and I do not know why. Do I need a SATA driver floppy for the Install Win drivers <f6> ? I thought not from the other threads here. I am not using Raid.
I have downloaded and read the manual from the support site, Support knowledgebase and every thread that I could find here in this forum.
My setup is the N9A2 Platinum, V1.
Bios v 1.4, 3/112/08
Phenom X3 720
Ultra 750W power Supply
Seagate 500GB SATA HD
WD 80GB SATA HD (for Photoshop scratch drive)
My Bios is set up as follows>
Integrated Peripherals
Extra RAID Controller - Disabled
On-Chip ATA Devices
PCI IDE Busmaster - Enabled
RAID mode - IDE
OK, Any ideas? You folk have a lot more experience with me. Thanks for all/any help.

Ports 5 and 6 ,the red ones ,are for the Promise Extra RAID controller ,which as per BIOS settings was turned off ,thats why the HDD was not detected .You can use that Promise controller with HDD-s ,even if they are not in RAID config ,but drivers are required.
Glad i could help you!

External monitor kills wireless

I am having the following problem with my Macbook Pro.
15” Macbook Pro i5 + Nvidia GT 330M. Nvidia driver 8.17.11.9494 MS Broadcom 80211N wireless driver 5.60.18.8. Windows 7 Pro bootcamped onto OSX 10.6.
Monitor is a Dell E2210H, and recognized by windows and Nvidia as such. Set to 1920x1080 60hz/32bit (native)
Monoprice miniD to DVI converter.
Nvidia in use. Sees it as a dell e2210H. Windows sees it as generic PnP monitor.
Wireless connected network.
No mouse or monitor attached:
www.google.com:
Reply from 74.125.19.104: bytes=32 time=24ms TTL=54
Reply from 74.125.19.104: bytes=32 time=24ms TTL=54
Reply from 74.125.19.104: bytes=32 time=26ms TTL=54
Reply from 74.125.19.104: bytes=32 time=24ms TTL=54
Reply from 74.125.19.104: bytes=32 time=29ms TTL=54
HULK (local server):
Reply from 192.168.95.10: bytes=32 time<1ms TTL=128
Reply from 192.168.95.10: bytes=32 time<1ms TTL=128
Reply from 192.168.95.10: bytes=32 time<1ms TTL=128
Connect Monitor no change.
Turn on monitor:
Reply from 74.125.19.104: bytes=32 time=25ms TTL=54
Request timed out.
Reply from 74.125.19.104: bytes=32 time=48ms TTL=54
Request timed out.
Reply from 74.125.19.104: bytes=32 time=65ms TTL=54
Request timed out.
Request timed out.
Request timed out.
Reply from 74.125.19.104: bytes=32 time=98ms TTL=54
Reply from 74.125.19.104: bytes=32 time=143ms TTL=54
Request timed out.
Reply from 74.125.19.104: bytes=32 time=39ms TTL=54
Request timed out.
Reply from 74.125.19.104: bytes=32 time=30ms TTL=54
Reply from 74.125.19.104: bytes=32 time=84ms TTL=54
Request timed out.
Request timed out.
Reply from 74.125.19.104: bytes=32 time=585ms TTL=54
Request timed out.
Request timed out.
Reply from 192.168.95.10: bytes=32 time=29ms TTL=128
Reply from 192.168.95.10: bytes=32 time=297ms TTL=128
Reply from 192.168.95.10: bytes=32 time=39ms TTL=128
Reply from 192.168.95.10: bytes=32 time=95ms TTL=128
Request timed out.
Reply from 192.168.95.10: bytes=32 time=41ms TTL=128
Reply from 192.168.95.10: bytes=32 time=71ms TTL=128
Reply from 192.168.95.10: bytes=32 time=461ms TTL=128
Reply from 192.168.95.10: bytes=32 time=132ms TTL=128
Reply from 192.168.95.10: bytes=32 time=42ms TTL=128
Reply from 192.168.95.10: bytes=32 time=64ms TTL=128
Request timed out.
Reply from 192.168.95.10: bytes=32 time=113ms TTL=128
Reply from 192.168.95.10: bytes=32 time=19ms TTL=128
Reply from 192.168.95.10: bytes=32 time=75ms TTL=128
Reply from 192.168.95.10: bytes=32 time=309ms TTL=128
Turn off monitor.
All ok.
PROBLEM states:
• Monitor connected and ON, next to macbook in bootcamp win7.
• Monitor connected, ON, and 5ft away from computer in bootcamp win7. (no proximity)
• Monitor connected, ON, and connected to 2nd laptop VGA, display set to macbook so it outputs the macbook in bootcamp win7. (connection)
NOT Problem states:
• Monitor connected and OFF.
• Monitor ON and not connected. (proximity)
• Monitor On, and connected to 2nd laptop on VGA in same location. (proximity)
• Monitor connected, ON, and connected to 2nd laptop VGA, display set to VGA so it outputs the 2nd laptop. (proximity+connection)
• LAN connected, any test.
• In Mac OSX, no problem.
So problem state is when the macbook is in NVidia mode, connected and using external monitor in Bootcamp Win7 over the wireless network. Proximity has no effect. Connection, unused has no effect. No wired LAN problem.
I found some posts from 2007 about OSX having this issue, no one got beyond “it must be the monitor is too close and interfering with wireless”
I would have to say driver issue if OSX is ok, and bootcamp is not. Swapping drivers with Bootcamp drivers, win drivers, no joy.
Ideas?
Ken aka fierrpawz.

Wow, I couldn't believe it when I saw it. I've been having really bad wifi troubles only in Windows (7 64-bit Ultimate, specifically), and after looking all over the place I happened upon this post. I immediately unplugged the monitor and voila, the signal improved instantly and dramatically. I ran several tests with the monitor unplugged and plugged, and I can confirm that the monitor is definitely the culprit. I'm also using the DVI adapter from Monoprice. Thank you for this post, time to cancel my order for a new router. I would have NEVER thought to try unplugging/plugging my external monitor (also a Dell, incidentally).
Technical details:
1. Mini DisplayPort to DVI adapter from Monoprice: http://www.monoprice.com/products/product.asp?cid=104&cp_id=10428&cs_id=1042802&pid=5106&seq=1&format=2
2. Windows 7 x64 Ultimate (problem doesn't occur in Mac OS).
3. MacBook Pro 13", newest model.
4. Dell S2409W monitor.

Why does Sony multi-card reader show up now as a RealTek product?

I've had a Sony MRW62E/T1/181 card reader for several years. It worked fine until recently. When I plugged in the USB cord that came with it into my XP Pro SP3 computer, I got a message asking me to install a RealTek driver. To the best of my knowledge, there are no RealTek products on my PC. I've tried rebooting and deleting entries in the Device Manager. No luck. I can't get the PC to recognize the card reader, much less retrieve photos from my SanDisk Ultra III 8GB SDHC camera card I've always used. Even stranger, I can use the card reader just fine if I plug it into the Windows 7 system at work. Yes, I have the Sony drive letter software installed. I've also tried different USB ports on my PC. Tips?
Solved!
Go to Solution.

Now if it’s a driver issue.
Most card readers and other USB Storage devices (ebook readers, cameras, camcorders, etc), use generic USB Win drivers.
Have you try to uninstall only the drivers of the USB Mass Storage Device?
Here is an example how to uninstall the Reader Digital Book USB drivers in the Win SO. It’s the same even for other Storage devices.
https://us.en.kb.sony.com/app/answers/detail/a_id/32193/p/73878,73935,73936/c/65,66/kw/drivers
Then reboot PC and connect the card reader.

Booklet printing HP Color LaserJet CP1514n missing

Printer Type HP Color LaserJet CP1514n.Service ID: 19027 Firmware datecode: 20130923 Start condition : Win7 (64-bit). HP UPD version: 6.0.0.18849 61.175.1.18849Action: Print in any application - Dialog : Print properties --> Finishing-->Pages per sheetExpect: "2 pages per sheet" Option: Booklet Mode: ...Get: NO booklet mode is availableProblem: Option for Booklet mode is no longer possible. Previous situation: Win 7 (32bit) in identical laptop. Booklet mode printing was possible at all time. I have updated the printer firmware once and the Win drivers twice. Normal printing is OK. But the much-used and loved booklet option is sorely missed!Thanks!

Hi , I see that you are missing the Booklet mode when using another Laptop running Windows 7. I would like to help you.
I checked the web site and see that there are basic drivers available for the printer as well as the Windows Update drivers.I would suggest to try the basic drivers, they may have been the ones installed on the other Laptop and not the Updates.Try the HP Universal Print Driver for Windows PCL6 (64-bit) and the HP Universal Print Driver for Windows PostScript (64-bit) to see if the Booklet option is available. HP Universal Print Driver for Windows PCL6 (64-bit). If you appreciate my efforts, please click the 'Thumbs up' button below.If you have any issues, please let me know what steps you have taken and the results. Thank You.

Reinstall (repair) CC app to fix Ps display issue

Now I have two issues.
#1 - Photoshop (Ps) stopped displaying brush spray correctly. Looks like sandpaper and should be smooth airbrush quality. Had been working. Issue is present with stylus (pen) or mouse. Tried many brushes and parameter changes with no real effect. Pressure sensitivity is still present.
#2 - In trying to fix this issue, I wanted to repair Ps. I learned there was no "repair", so I uninstalled normally through Control Panel. Now I can't reinstall from CC. CC thinks Ps still there, but it's not.
System: Lenovo Yoga Win 8.1 with stylus.

#1, post on the photoshop forum.
#2, http://helpx.adobe.com/creative-cloud/kb/aam-lists-removed-apps-date.html

I have pse 12 i bought a wacom intuos pen tablet small recently but when i click on the tablet options only the opacity pressure sensititive option works everything else does not respond to pen pressure sensitivity

who's fault is it adobe or wacom?who should fix the problem or can i fix it on my own? the wacom driver is up to date just in case u suggest that to me.

This is the Photoshop Touch for tablets forum. But anyhoo...
I have a Bamboo Splash tablet that I use with Windows 8.1 64-bit but have zero problems using it in Photoshop CC 2014.2.2. Things that come to mind to me are:
You didn't mention what model tablet. Wacom has a range of drivers for your specific model here. Try that.
There's no way that you can install Mac drivers on a Windows system. Mac drivers come as DMG files; Win drivers come as EXE files.
If you have the proper drivers installed and it's still giving you overall system issues, look into other aspects of your system. e.g., Are there other applications running in the background that could interfere? Exit them. Are all the drivers for your components updated? (Video, audio, etc.) If you don't feel computer savvy, get someone who is to take a look.
ON EDIT: I am a derp. I just saw the thread title. Sorry about that. Go to the link I posted above to find the Windows drivers for the Intuos 4.

Yoga 13 Win 7 Drivers

Similar Messages

Maybe you are looking for