Yoga 2 13 laptop - Windows 10 issues

I have upgraded to windows 10 and after a few rookie win 10 issues and drivers problems I have 1 last issue to solve. same as listed up this topichttps://forums.lenovo.com/t5/Windows-10/Yoga-2-13-laptop-Windows-10-issues/td-p/2128415 - Shutdown / standby bug: computer hangs often when trying to shutdown or enter standby mode -the display goes black, but the Windows touchkey below the screen still gives vibration feedback, power light stays on and fans keep spinning loud. The solution then is to hold the power button pressed for a long time to force shutdown or wait until the battery depletes. This is noticable when I close the lid and open it later. Ive tried changing "lid close" settings to hibanate etc but it still does the same thing.

I upgrated to Windows 10 on July 31st with my Yoga 2 13 and I only ran into two major issue and a minor issue.
Side note: my Windows logo button on the Bezel (vibrates when you touch it and then brings up the app tiles screen) hasn't worked for some time and still doesn't work after the upgrade - anyone know if there's a software fix, driver location etc?
Major issue 1: No internet connectivity!
- All network devices show up as working properly and all drivers upto date.
- No possibility for network connection not even through bluetooth sharing via mobile phone.
I discovered one post suggesting removing all Cisco VPN connections before upgrading as removal after upgrade didn't resolve the issue.
Fix:
If after upgrading you have no internet connectivity, revert back to your previous windows version, uninstall all Cisco and other VPN clients then reinstall windows 10. Internet connections should work now.
Major issue 2: I am still having issues with Cisco based VPN's not staying connected. Haven't yet investigated a fix at the moment, just dealing with it.
Admin Edit - Microsoft released a support tip related to the VPN / Wifi issue here - https://support.microsoft.com/en-us/kb/3084164
Minor issue:
- Windows 10 doesn't recognize any of the transitional modes of the yoga (as in Lenovo transitions) resulting in the keyboard and mouse being disabled only in full tablet mode. Using Window's Tablet mode button in the action center doesn't disable these inputs either. Until Lenovo comes up with an update to Transitions this could be a serious annoyance for some folks.
Minus these annoyances the move to windows 10 hasn't been too awful. Granted I haven't had much of an opportunity to try all the software I rely on as of yet, but in the next couple weeks I'm sure I'll discover several other hicups.

Similar Messages

Issues with Thinkpad yoga on Windows 7 64-bit

I uninstalled the windows 8.1 that came with my Thinkpad Yoga to installe windows 7 64-bit because there was no support for Power Manager ( a tool that allows you to charge your battery only upto a certain percentage (eg 40%) which helps reduce battery aging when the notebook is mostly operated on AC power).
Doing that required me to fully clean the Hard-disk during the installation process.
I installed almost all of the drivers available on http://support.lenovo.com/us/en/products/laptops-and-netbooks/thinkpad-yoga-series-laptops/thinkpad-...
for thinkpad yoga and windows 7 64 bit.
Happily, this provided me the Power manager, and I can use it just as I wanted.
However, all these has brought in additional issues which are listed below:
1. The touch pad right click doesn't work. Only two finger tap works as right click.
2. The touch pad gestures for zoom and scroll doesn't work at all.
3. The screen auto-rotate doesn't work.
4. The touch screen gesture for zoom doesn't work.
I did install the ultra-nav and screen-rotate drivers, but I get error messages regarding synaptics ... not working and also sensor driver not working during the windows startup.
Any help please?
Thank you.

Just when I was happy that major issues have been resolved by constant updating, I am now experiencing this frightening problem. Mostly during startup, and lately in the middle of working, the screen freezes, shows very damaged image (like TV noise), produces the most unpleasant sound through the speakers and nothing works. I need to restart and hope that it will be ok. Sometimes it requires 2 or 3 restarts, going to safe-mode and returning back to get the issue resolved.
This has happened three or 4 times within 24 hrs. I searched in the forum and for another model it was suggested that epresscache might be the cause. I disabled the service, but the problem reappeared even then.
Any help please:
This is what appears on the screen when the computer freezes and produces loud unpleasant noise sound.
Link to image
Moderator note: large image(s) converted to link(s): About Posting Pictures In The Forums

I am having some issues getting OS X to mount the hard drive from my old laptop (Windows 7). Is there anything I can do to mount this?

I am having some issues getting OS X to mount the hard drive from my old laptop (Windows 7). Is there anything I can do to mount this?
It is not showing on the Desktop or the left colomn of Finder (Set to do both in Finder Prefernces) and is not showing up under the Disk application under Utilities (Sorry can't remember the name off the top of my head!)

cjz0r wrote:
...I'm starting to think it is most likely NTFS, am I looking at needing an Application to read the NTFS partitions on the drive?
You should be able to read NTFS formatted drives, just not write to them. For that matter, USB Flash drives generally come formatted NTFS for use with PC's and they have to be able to mount on a Mac in order to reformat them for Mac use. The Windows utilities supplied on those Flash drives will be deleted when the drive is reformatted for Mac use so I routinely copy them to the Mac desktop first before reformatting.
You might look into something like this http://eshop.macsales.com/item/NewerTech/U3NVSPATA/ if the enclosure is an issue. It looks weird but it works.

Issue with a brand new HP laptop, windows 8 preinstalled

Dear all,
I have the following issue. I just unpacked my HP Envy 4 laptop (windows 8 preinstalled). I finnished the first setup of the laptop and I had the windows 8 "metro" screen, after that the laptop restarted and since then I just get a sign that I need to perform recovery. I can enter the system diagnostig and system information, but I can't access the boot device option, BOIS setup and system recovery - if I press F9 F10 or F11 I receive this blue screen.
The error in this blue screen is 0x000225 - a required device isn't connecte or cannot be accessed. I searched the internet for this error, but the only suggestions are for virtual machines to change the lan adpter or to enable the acpi support.
I have installation Windows 8 flash drive (from my other laptop) but I cant boot from it as well. Any idea how can I fix this, or I need to ship pack the laptop to HP?

Hi TPAKTOUCTA,
Take a look at this document and let me know if it helps. This recovery document may help as well.
Please let me know & Good luck!
↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓

I cannot install the latest version of iTunes on laptop (windows xp). I receive a windows installer error message. Not having any issues installing any other software. Was having no issue syncing w iPhone. Made the mistake of uninstalling prior version.

I cannot install the latest version of iTunes on my laptop (windows xp). I receive a windows installer error. Am not having any problem installing other software or syncing w iPhone. Made the mistake today of uninstalling my older version and not cannot install new. Need new version in order to sync w new iPad.
Any help would be appreciated.

Apparently, security programs like Macafee and Norton view Itunes updates as new programs and block then from access. If you add Itunes to the list of exemptions, it solves the problem.

HT4235 my iphone 4 wont connect to my laptop (windows 8) via usb but it will however register that it is there via 'photos' im not using the cable that came with my phone, does that affect the connection? i just want it to connect to my itunes again!!!

my iphone 4 wont connect to my laptop (windows 8) via usb but it will however register that it is there via 'photos' im not using the cable that came with my phone, does that affect the connection?
i just want it to connect to my itunes again!!!
Thank you to anyone and everyone that manages to help!

Hello webster995,
Thank you for the details of the issue you are experiencing with your iPhone not appearing in iTunes. I recommend following the steps in the article below to troubleshoot the issue you described:
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/TS1538
Thank you for using Apple Support Communities.
Best,
Sheila M.

[FIX] Yoga 13 Windows 8.1 Touchpad and Pixelated Windows.

Hello everybody! This would be my first post in this forum.
I thought that I had to share this since I wasn't able to find a fix for the Touchpad. And since I was also able to solve the pixelated windows issue, I thought I might want to share it.
[ISSUES]
1. Touchpad multi gestures not working and slow move speed.
The first thing that I realised after booting up my Yoga after the Windows 8.1 update was that the cursor was moving rather slow. I tried meddling with the pointer speed in the mouse options under Control Panel and it didn't seem to work.
Started Googling and was figured that by installing the Synaptics Drivers, it would solve the problem. Unfortunately, nothing changed. Since I know that it is driver related, I got to work and remembered some simple steps to update hardware drivers. Let's get started!
Steps:
1. Go to Control Panel.
2. Go to Device Manager. You should see a long list of hardware that your system is supporting.
3. Find "Mice and other pointing devices". Click the arrow to expand the drop down list.
4. You should see "PS/2 Mouse" or something like that. (I have already updated it and it no longer displays that name)
5. Right click the "PS/2 Mouse" and click "Update Driver Software".
Make sure you are connected to the internet and let it install the drivers. The cursor speed and touchpad multi gestures will go back to normal!!
2. Pixelated Windows.
This would be the second thing that I noticed when I opened my Chrome browser. The words were very pixelated. Initially, I suspected the screen resolution, but it wasn't the case. However, I was close. After some Googling, it had to do with the Display.
Steps:
1. Right click on your Desktop.
2. Click "Screen Resolution". You should see the options to Change your display.
3. There should be 3 options that are highlighted in BLUE. Select "Make text and other items larger or smaller".
4. Under "Change the size of all items", select "Smaller - 100%".
5. Check "Let me choose one scaling level for all my displays"
6. Apply
And that should solve both issues. So far, I have only encountered these two issues. If I were to find out more, I would certainly add them to this thread.
Cheers everyone!
Solved!
Go to Solution.

Hi uzentan,
thanks for posting this up. This is a great guide in which we will be happy to assist in publishing as a Knowledge base artile for customer to work through their issue.
Thanks for posting.
Regards

Can't get Quicktime to work on my laptop, Windows 8.1

Can't get Quicktime to function on my laptop, Windows 8.1 Need a solution to this problem!

Hi there Catching Fire,
If you are experiencing issues installing Quicktime, you may find the article below helpful.
Issues installing iTunes or QuickTime for Windows
http://support.apple.com/kb/HT1926
-Griff W.

Error windows keep popping up on our laptop (Windows) it has to do with MobileMe. Trying to uninstall but not able to. Now can't even open itunes???

Error windows keep popping up on our laptop (Windows) it has to do with MobileMe. Trying to uninstall but not able to. Now can't even open itunes???

MobileMe should be uninstalled. See note 2 of Troubleshooting issues with iTunes for Windows updates.
tt2

XPS 12 (9Q33, Mid 2013) Laptop Screen Issue

The issue started occurring just few weeks before the end of warranty. My laptop stopped detecting the the internal screen in Windows. When booted to Windows with no other screen connected, the internal screen is blank. If the external screen is connected during booting, internal screen is enabled but with settings like resolution taken from the external screen causing everything to be shifted to left and the external screen is blank. In fact it seems that Windows thinks the external screen is internal as touches on internal screen are still working. BIOS, Windows recovery, Windows booting are correctly displayed on the internal screen - the problem is with Windows logon screen and further. Also when connected to the external screen, Windows doesn't show internal screen in the dropdown in the Screen Resolution menu. When using Ubuntu, the OS correctly recognises and works with internal or both screens. I tried reinstalling vanilla windows, next used Dell Recovery to reset to the initial state and nothing helped - this is why I think this isn't Windows issue but hardware issue that affects Windows. I followed some advices from the Dell support portal and tried to install the firmware update (XK8DT) but got "AuxUpdate MFC Application has stopped working" error and couldn't proceed. Installed all drivers including the BIOS update from the Dell website - nothing helped. Run the diagnostics from F12 menu - they all passed reporting no problems. Restored BIOS defaults - no difference. Run Online Helpdesk tests, no problems detected.
The biggest problem is that I thought the problem is with Windows initially and waited to reinstall it due to being busy at work and not having time to back up all my files and was very disappointed to realise it is not a software issue 3 weeks after my warranty ended.
Here are two videos I recorded to demonstrate the problem:
cs_setInnerHtml('video_ccae9f5a-be4c-402a-82d6-a4c87d2c76a3','');
cs_setInnerHtml('video_cdcdd9d0-3097-4aa1-8d67-7d16970c70cb','');

Since I haven't got any response I will recap the issue:
When I boot the laptop with external screen disconnected:
i can see the BIOS and the Windows loading screen on the internal screen (and Windows recovery etc).
when Windows is loaded i can't see the logon screen or home screen but a blank screen only.
when i connect external screen after Windows is loaded, i don't see anything on the internal and external screen.
When I boot the laptop with external screen connected:
when I boot and the lid is closed, Windows works perfectly fine on the external screen. When I open the lid, the internal screen is still blank, touch works though.
when i boot and the lid is open, Windows is displayed on the internal screen and the external screen is blank. The displayed home screen is broken on the internal screen since it uses the settings like resolution from the external screen, since the external screen's resolution is higher.
In both boot scenarios, when the external screen is connected, the Windows screen properties dialog doesn't show the internal screen, only external.
I reinstalled windows from the recovery partition but it didn't solve the problem.
I run diagnostics from the Dell Support website it all passed.
I updated all drivers including BIOS it didn't help.
I run BIOS diagnostics, they all pass as on this video:
cs_setInnerHtml('video_cf0d6ef7-1ca1-4fe1-8ca1-7551bf272166','');
I don't know what to do, this happened when warranty was still valid, i followed different suggestions from the support page and thought it is a software issue. Didn't reinstall Windows as i had couple of projects behind the schedule and didn't have time to back everything up correctly. After i did reinstall and found that this isn't a software issue, the warranty was already expired by two weeks.

Yoga 13, Windows 8 Pro, Single-Click sometimes results in Double-Click

I'm using a brand new Yoga 13 (Window 8 Pro). Clicking on the touchpad (not the touch screen) sometimes has issues. Specifically, every once in a while, a single-click on the touchpad will result in double-click behavior.
I'm not referring to tapping, but rather physical clicking (press, depress touchpad on the lower left).
I disabled tap-to-click in case it was registering the tap, and then the click. That didn't resolve the issue.
I also increased the speed required (within Windows) for a double-click to the fastest (least time between clicks) possible. That also didn't resolve the issue.
It really seems like the touchpad, every once in a while, registers a double-click, like some sort of physical defect in the touchpad that presses, depresses, presses depresses immediately.
Ideas?

I'm running Windows 8 (Not Pro) on a brand new Yoga 13 and am experiencing the same probem. It doesnt happen all the time but just enough to be really annoying. It seems like if I try right clicking I can get it to stop.

Compaq CQ56 154 laptop windows 7 recovery process fails. PLEASE HELP

Compaq CQ56 laptop windows 7 recovery process fails because RM component runtime and no valid RP index. PLEASE HELP
I have tried the recovery process on this laptop over 10 times now and with multiple new hdds and it seems like it comes to a fail at the very end.I have posted the error log that I get. Please help me out in regards to this.
The process completes unit and at the very end the error log gives this:
Error encountered during RM component run time
Please contact RM team for investigation
                    CopyRight @   SRD.cpp :   12                      CopyRight @   SRD.cpp :   13 SRD 1.1.0.0115 System Recovery Deployment, provided by CyberLink. (cNB)
                    CopyRight @    SRD.cpp :  14           DeployRp:etSRDMode @ DeployRp.cpp : 3571 SetSRDMode 1
                        wmain @    SRD.cpp :  73 Executing call 'L"drp.SetConfigIni('deployrp.ini')"'
        DeployRp:etectMedia @ DeployRp.cpp :  371 Start to detect disks ...
              DeployRp:etUp @ DeployRp.cpp :  630 Get User Partition drive letter : c.
        DeployRp:etectMedia @ DeployRp.cpp :  563 Disk Index : [HDD] 0, [N/A] -1
      DeployRp:etTargetDisk @ DeployRp.cpp :  571 Start to load ini ...
              DeployRp:etUp @ DeployRp.cpp :  630 Get User Partition drive letter : c.
             DeployRp:etBp @ DeployRp.cpp :  643 Start to find Build Partition drive letter.
              DeployRp:etBp @ DeployRp.cpp :  650 Build Partition drive letter : c.
      BuildConfig::LoadConfig @ BuildConfig.cpp :   28 Loading C:\RM\Tools\DeployRP\build.ini ...
      BuildConfig::LoadConfig @ BuildConfig.cpp :  111 C:\RM\Tools\DeployRP\build.ini loading complete.
                        wmain @    SRD.cpp :  83 Executing call 'L"drp.LoadBuildIni()"'
       DeployRp::CheckRpExist @ DeployRp.cpp :  713 Start to check whether Rp exists.
       DeployRp::CheckRpExist @ DeployRp.cpp :  750 Recovery Partition doesn't exist.
DeployRp::CheckSystemRecoveryDoneFlag @ DeployRp.cpp : 757 Start to check whether SystemRecoveryDone.flg exists.
DeployRp::CheckSystemRecoveryDoneFlag @ DeployRp.cpp : 794 SystemRecoveryDone.flg doesn't exist.
       DeployRp::InstallMSXML @ DeployRp.cpp : 1248 Start to install MSXML6.dll
       DeployRp::InstallMSXML @ DeployRp.cpp : 1292 Install MSXML6.DLL complete.
      DeployRp::CreateLangIni @ DeployRp.cpp :  331 Create Lang.ini command: C:\RM\Tools\DeployRP\CreateLangIni.exe c
     DeployRp::CheckSSRDFlags @ DeployRp.cpp : 1044 Start to check if SSRD flags exist
     DeployRp::CheckSSRDFlags @ DeployRp.cpp : 1061 SSRD flags do not exist
     DeployRp::CheckSSRDFlags @ DeployRp.cpp : 1063 Check if SSRD flags exist complete
    DeployRp::CreateBootRMWim @ DeployRp.cpp : 1363 Creating BootRM.wim ...
    DeployRp::CreateBootRMWim @ DeployRp.cpp : 1374 Start to do setting.
    DeployRp::CreateBootRMWim @ DeployRp.cpp : 1377 SetWimImageDstPath.
    DeployRp::CreateBootRMWim @ DeployRp.cpp : 1382 Check tool existence.
    DeployRp::CreateBootRMWim @ DeployRp.cpp : 1385 Tool Path: c:\RM\Tools\opktools\dism.exe
    DeployRp::CreateBootRMWim @ DeployRp.cpp : 1389 Dism.exe exists.
    DeployRp::CreateBootRMWim @ DeployRp.cpp : 1392 SetWimMountPath.
    CWimMgr:etWimMountPath @ WimMgr.cpp :  199 Wim File Mounting Path = C:\RM\Tools\DeployRP\mount\
    DeployRp::CreateBootRMWim @ DeployRp.cpp : 1397 SetLanguagePacksPath.
   DeployRp::CreateBootRMWim @ DeployRp.cpp : 1402 SetToolsPath.
        CWimMgr:etToolsPath @ WimMgr.cpp :  213 [SetToolsPath] lpszToolsPath = c:\RM\Tools\opktools\
      CWimMgr:etToolsPath @ WimMgr.cpp :  220 [SetToolsPath] m_szDISMExeFullPath = c:\RM\Tools\opktools\dism.exe
    DeployRp::CreateBootRMWim @ DeployRp.cpp : 1406 Setting complete.
   DeployRp::CreateBootRMWim @ DeployRp.cpp : 1411 Start to do Initialization.
         CWimMgr::InitWimMgr @ WimMgr.cpp :  358 Windows PE Source Path = c:\RM\RP\sources\boot.wim
    DeployRp::CreateBootRMWim @ DeployRp.cpp : 1420 Initialization complete.
    DeployRp::CreateBootRMWim @ DeployRp.cpp : 1423 Start to mount WIM image.
       CWimMgr::MountWimImage @ WimMgr.cpp :  437 Temp Working Path = C:\RM\Tools\DeployRP\temp\
    DeployRp::CreateBootRMWim @ DeployRp.cpp : 1426 Mount WIM image complete.
    DeployRp::CreateBootRMWim @ DeployRp.cpp : 1431 Start to setup language packs...
   DeployRp::GetSupportedLang @ DeployRp.cpp : 1639 Lang.ini path: c:\RM\Tools\DeployRp\lang.ini
   DeployRp::GetSupportedLang @ DeployRp.cpp : 1678 Supported Languages :
    CWimMgr:etWinPELanguage @ WimMgr.cpp : 1134 CWimMgr:etWinPELanguage - Enter
    DeployRp::CreateBootRMWim @ DeployRp.cpp : 1437 Setup language packs complete.
    DeployRp::CreateBootRMWim @ DeployRp.cpp : 1443 Start to setup tool's language packages...
        CWimMgr:etupPackage @ WimMgr.cpp : 1327 Package does not exist: c:\RM\Tools\DeployRp\WinPE_LangPacks\64\winpe-setup.cab
        CWimMgr:etupPackage @ WimMgr.cpp : 1327 Package does not exist: c:\RM\Tools\DeployRp\WinPE_LangPacks\64\winpe-Scripting.cab
        CWimMgr:etupPackage @ WimMgr.cpp : 1327 Package does not exist: c:\RM\Tools\DeployRp\WinPE_LangPacks\64\winpe-SRT.cab
        CWimMgr:etupPackage @ WimMgr.cpp : 1327 Package does not exist: c:\RM\Tools\DeployRp\WinPE_LangPacks\64\winpe-WMI.cab
        CWimMgr:etupPackage @ WimMgr.cpp : 1327 Package does not exist: c:\RM\Tools\DeployRp\WinPE_LangPacks\64\winpe-wds-tools.cab
    DeployRp::CreateBootRMWim @ DeployRp.cpp : 1450 Setup tool's language packages complete.
    DeployRp::CreateBootRMWim @ DeployRp.cpp : 1452 Start to un-mount WIM image...
    DeployRp::CreateBootRMWim @ DeployRp.cpp : 1455 Un-mount WIM Image complete.
        DeployRp::CalculateRp @ DeployRp.cpp : 1696 Start to estimate recovery partition size ...
        DeployRp::CalculateRp @ DeployRp.cpp : 1709 base.wim.wim size : 12452203405 bytes.
        DeployRp::CalculateRp @ DeployRp.cpp : 1725 install.log file size : 623780 bytes.
        DeployRp::CalculateRp @ DeployRp.cpp : 1735 WinRE and WinPe files size : 281055618 bytes.
        DeployRp::CalculateRp @ DeployRp.cpp : 1740 RM Software size : 63933517 bytes.
        DeployRp::CalculateRp @ DeployRp.cpp : 1745 BootRM.wim size : 268793098 bytes.
        DeployRp::CalculateRp @ DeployRp.cpp : 1750 Patch Folder size : 369308088 bytes.
        DeployRp::CalculateRp @ DeployRp.cpp : 1755 File4Rp Folder size : 0 bytes.
        DeployRp::CalculateRp @ DeployRp.cpp : 1761 Extra space : 2371154178 bytes.
        DeployRp::CalculateRp @ DeployRp.cpp : 1766 Prevented Extra size : 0 bytes.
        DeployRp::CalculateRp @ DeployRp.cpp : 1776 Recovery Partition estimated size : 15807695464 bytes.
        DeployRp::CalculateRp @ DeployRp.cpp : 1777 Recovery partition estimation complete.
           DeployRp::CreateRp @ DeployRp.cpp : 2072 Start to create recovery partition ...
                DetToolRpInfo @ DeployRp.cpp :  122 PartitionCount: 4. PartitionType: 0. PartitionNumber: 0. PartitionStartAddr: 0 bytes. PartitionLength: 0 bytes
                DetToolRpInfo @ DeployRp.cpp :  122 PartitionCount: 4. PartitionType: 12. PartitionNumber: 3. PartitionStartAddr: 79917219840 bytes. PartitionLength: 108093440 bytes
                DetToolRpInfo @ DeployRp.cpp :  122 PartitionCount: 4. PartitionType: 7. PartitionNumber: 2. PartitionStartAddr: 209715200 bytes. PartitionLength: 73013395456 bytes
                DetToolRpInfo @ DeployRp.cpp :  122 PartitionCount: 4. PartitionType: 7. PartitionNumber: 1. PartitionStartAddr: 1048576 bytes. PartitionLength: 208666624 bytes
                DetToolRpInfo @ DeployRp.cpp :  156 Can't find valid Rp index.
           DeployRp::CreateRp @ DeployRp.cpp : 2090 Invalid Rp index
                        wmain @    SRD.cpp :  93 Executing call 'L"drp.Deploy()"'
                        wmain @    SRD.cpp :  38 Output
ERROR: call L"drp.Deploy()" failed.
                       wmain @    SRD.cpp :  38 Output - Returned HRESULT = 0xe0ef002f

Hello k877
I am sorry to hear you are having issues reinstalling your operating system. I am providing you with a link here to a document titled Recovery Disk Creation Error Codes (Windows 7). Now document is for creating the recovery disks but the error is showing up in your error log (0xe0ef002f). The error according to the document is the File/directory does not exist. It looks like a function call Deploy() is attempting to access this File/directory and is unable to.
This leads me to think that it is the disks that you are using. It would stand to reason anyways as you state you have tried this on multiple hard drives. A good test would be to check to see if your error in the error log is the same every time. If it is happening at the same point each time then simply order a new set of discs from here.
I hope this resolves your installation issue. Thank you for posting your question on the HP Forums. Have a great day!
Please click the "Thumbs Up" on the bottom right of this post to say thank you if you appreciate the support I provide!
Also be sure to mark my post as “Accept as Solution" if you feel my post solved your issue, it will help others who face the same challenge find the same solution.
Dunidar
I work on behalf of HP
Find out a bit more about me by checking out my profile!
"Customers don’t expect you to be perfect. They do expect you to fix things when they go wrong." ~ Donald Porter

I have installed flash player on my hp laptop windows 7 i am playing games but then all off a sudden it tells me that flash player is not found 11.3.0 version is required but i have this already installed now i cant play my games

i have installed flash player on my hp laptop windows 7 i am playing games but then all off a sudden it tells me that flash player is not found 11.3.0 version is required but i have this already installed now i cant play my games. I have uninstalled and reinstalled it but it still not working please can any one help.

MatchingNode
YOUR SYSTEM INFORMATION
Your Flash Version
17.0.0.134
Your browser name
Internet Explorer
Your Operating System (OS)
Windows (Windows 7)
I cant take a screen shot of the flash player update tab as it wont let me and wont let me copy and paste sorry
i am using internet explore browser and trying to play facebook games thats where i am facing the issues.

Connecting my gen 4-5 nano to new HP laptop windows 8 using USB 3.0 port computer restarts

Connecting my gen 4-5 nano to my new HP laptop Windows 8 using USB 3 port itunes opens then an error message "your PC ran into a problem and needs to restart ........." WDF Violation. If I don't disconnect the nano the computer will keep restarting. After restarting a window opens saying it wants to send the following files to Microsoft "C:\Windows\Minidump\010413-20875-01.dmp, C:\Users\Curt\AppData\Local\Temp\WER-69015-0.sysdata.xml, C:\Windows\Memory.DMP". It does this using any of the 3 USB 3 ports. Using the USB 2 port it works just fine. Thanks for any help and as info.

I found the solution!!! Even ended up educating the tech -- who didn't have a clue.
I have a brand new 7th gen iPod Nano, a brand new Windows 8 laptop, and iTunes 11. Everything was working all fine and dandy until I unchecked "Enable Disc Usage in iTunes on my iPod. Then all **** broke loose. I got the blue screen of death with the WDF_violation and I couldn't even plug my Nano in without it crashing my computer, let alone access iTunes to re-enable Disc Usage. Because the crashes happened immediately after I did that I just KNEW it had something to do with that. Trouble is, I couldn't fix it.... or so I thought.
I was on the phone with the tech, who was telling me it was a driver issue ( impossible because both the laptop and iPod are brand new) and I was looking around in iTunes while she did.
HERE IS YOUR SOLUTION: Edit --> Preferences --> Devices. Check Prevent iPods, iPhones and iPads from syncing automatically. Then plug in your iPod, re-enable the Disc Usage, and voile!!!!!! Problem solved.

Yoga 11 (Windows RT) - worth the discounted price?

As the title indicates, I'm curious as to whether the discounted Yoga 11 price is worth it ($299 + tax). I'm currently looking for a netbook-like companion to take with me when I go to class or work. I'm currently deciding between this and the Dell Inspiron 11 3000. The Asus T100 is a bit too small for my liking, and has some quality control issues. Chromebooks are ruled out largely due to the lack of editing PDF support (there are some apps, but they mostly are terrible).
While I like the form factor and battery life, I'm skeptical of the Tegra 3 processor. That's about 2 years old now, and I've been hearing that the Yoga 11 (and Surface RT first gen) are both pretty laggy when it comes to typing in Microsoft Word and using other apps in general. Have these issues been fixed with updates (particularly, the 8.1 update recently released)? Or would people suggest passing on the Yoga and going for something that's full windows?
Solved!
Go to Solution.

I bought a Yoga 11 recently, at the $299 price, and although I have some quibbles, I'm generally very pleased and would recommend it, especially at this price.
Windows 8.1 RT has a very snappy interface, even with the Tegra 3 cpu, and I've never noticed any lag switching between programs, and from the desktop to metro interface. I've also found Word performs very well, along with the rest of Office. I just gave a presentation at a panel this weekend and everyone in my group loaded their powerpoints on my Yoga 11, most of them created on Macs. Everything went fluidly.
Where you notice the CPU is in loading programs, and downloading/installing software. Programs like Word take an extra 2-3 seconds beyond what I'm used to from my Atom netbook (which also uses an SSD). I suspect the I/O to the drive isn't that fast, along with the processor. My wife has a Nexus 7 with the same processor, however, and it seems to perform better on the Yoga in Windows 8.1. I'm an Android person, but I really wanted a fully functional version of Office for my portable, along with great battery life -- this thing fits the bill, even better than the 11S, which has around half the battery life.
I don't mind being stuck with RT, though it still has few apps, since I'm using this device mostly for tablet-style media consumption, and occasional Office work. It's perfect for that. The thing about it is that the build quality is clearly that of a much more expensive machine. So even though it's got this tablet processor (which, again, is fine, just a bit slow), the screen, keyboard, fit and finish are that of a premium $700 machine, which was their original price point.
Of course it depends on your needs, but for me, this device is great. Ideal travel companion too, the only exception is that it won't recognize ethernet dongles, so you can't use wired internet at all. Windows 8.1 prevents even the jailbreak that allowed people to load the drivers before. Really stupid move on Microsoft's part, but then they're not the most brilliant company.

Yoga 2 13 laptop - Windows 10 issues

Similar Messages

Maybe you are looking for