Yoga 2 Pro Downgrade Win 8 to Win 7 ??

I'm done with Win 8.1. It's unstable with some of my primary apps (Thunderbird, etc..)
Is it possible to downgrade my Yoga 2 Pro from Win 8.1 to Win 7?
I don't see Win 7 drivers listed on the Lenovo download site.
Guess I'm outta luck?

Dear Drizzy
Welcome to Lenovo forums
Windows 7 has limited support now as it is not 100 % certain you will find all the drivers and also downgrading will lead to the loss of the recovery option in your machine.
if ypu installed windows 7 you will need a new liscence key and you will not be able to get to the factory settings using the recovery
Please let us know what problems you are facing with windows 8.1 and we will try to help you with them
you can read the info about windows 8.1 refresh from the below link if that might help
http://windows.microsoft.com/en-us/windows-8/restore-refresh-reset-pc
Thanks
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

Similar Messages

  • Ready to install fresh win 8.1 on new Yoga Pro 2

    So, I just got my yoga pro 2 Friday. Can't stand the extra stuff and 7 particians. 
    I've got a usb stick with a copy of win 8.1 on it. I can boot to it and get the windows installer started ( I stopped at the partiican table)
    I got the drivers folder from the D: on the yoga backed up.
    Got my win 8.1 pro product key written down.
    Don't think I will need any of the lenovo apps.
    Nothing else I need, right?  I did actually make a system image of the fresh install on another external drive when I got it, so if i did need to go back, I can.
    The windows installer will take care of all partiicans, correct? I'm new to EUFI boot.  I can see that legacy mode is disabled in the bios now.
    Thanks for any help. Looking forward to a clean install.  Wish I could have gotten this from a MIcrosoft store instead so I don't have to deal with it.
    Solved!
    Go to Solution.

    seems you're already ready.

  • New user of Yoga pro 3 : trackpad gestures and win 10

    Dear all,  I just got my Yoga pro 3 and coming from a Mac, I am a bit lost (I use Win 7 at work). One thing that I miss the most is the track pad, although the Yoga's seems to be quite good. However, I thought there would be 2-3 finger gestures, and apart from 2-fingers scroll, which is fine, I haven't found anything. Do I need to install something? The thing I really need is a 2-finger Right click, as in a Mac (I am so used to it!)...the rest I can live without.
    FInally, I was thinking about upgrading to Win 10: do you recommend it? Is it worth it? Also, how to do it? I thought I would get a "Get Windows 10" icon (my wife does in her 4 years old laptop) but I do not.
    Thanks for your help!

    Thanks !  Indeed it works but I must press really hard! I was more thinking of something like the 1-finger press but I guess I wil make do with it...

  • Can I set up my Macbook Pro to boot to Win 7 from an external drive?

    Rather than partition my internal drive for having to work with Windows & Office 2010 (specifically Access 2010) can I set up my macbook pro to boot to Win 7 from an external drive?

    No, not with Boot Camp. I've never even tried it with a VM (which I use) - I keep all the data on my internal drive. I'm not saying that it couldn't be done with a VM, I've just never tried it.
    Clinton

  • Can premiere pro cs4 run on win 8.1

    can premiere pro cs4 run on win 8.1

    If anyone is still using CS4 and has Win8.1 you will find them in Premiere Pro CS4 & Earlier

  • CAN LOGIC PRO X WORK WITH WIN 7 OS 64 BIT

    IS LOGIC PRO X COMPATABLE WITH WIN 7 64 BIT

    No. It runs on OS X only.
    Please stop typing in caps. It is considered shouting on the web and is also more difficult to read.
    Allan

  • Acrobat Pro Ver 9 for Win 7 the menu bar (File, Edit, View, Document etc) Disappears when I move the Window

    Lately in Acrobat Pro Ver 9 for Win 7 the menu bar (File, Edit, View, Document etc) disappears when I move the window . . only happens when I have a pdf file open . . everything worked fine until a few days ago . . F9 fixes the problem until I move the window again . . I realize my version is old so I tried tried downloading XI reader and having the same issue . . any help would be appreciated

    Hi Ernestprinter,
    Check if you have multiple Java versions installed on your computer.
    Try clean boot http://support.microsoft.com/kb/929135
    Also i would suggest uninstall security software and install it back.
    Currently you may use F9 key to restore Menu bar.
    Regards,
    Ajlan Huda.

  • How can i change when i start the mac book pro, between mac and win?

    when i start the mac book pro, between mac and win?

    If you want to set which OS your system boots into (provided Windows is installed using BootCamp and not a virtualization option such as Parallels, Fusion, or VirtualBox), just hold the "Option" key down when you turn your computer on.  Continue to hold the key down until you see the options for booting into the OS of your choice.  Just click on the arrow under the one you wish (tap to click won't work here if you have it enabled... you'll need to physically click the trackpad).  If you want to change which OS your system normally boots into, just go into System Preferences in OS X and select "Starup Disk".  Whichever OS you select here will be the OS your system will automatically boot into.

  • Windows 8 pro downgraded into windows 7 pro

    Dear Microsoft Team
    we have purchased 10 hp T440P notebook with windows 8 pro 64 bit.
    My small query regarding windows 8 pro downgradation into windows 7 pro.
    1st my Question who will provide winows 7 pro product key?
    2nd my Question if i put win 7 pro product key from my friends so i know  it's genuine. 
    Thanks and regard
    Mohan Lal
    {removed}

    For both your question, I suggest contact Microsoft Sales
    http://www.microsoft.com/oem/en/licensing/sblicensing/pages/downgrade_rights.aspx#fbid=sLMLnUlmfw8
    The downgrade process
    Follow these steps to downgrade to a previous version of Windows software:
    1.Obtain genuine Windows media and a corresponding product key for the version of Windows that is eligible for downgrade.
    •The media should come from a prior legally licensed version from the OEM or retail channels.
    •End users who are licensed separately through Microsoft Volume
     Licensing (VL) may provide their VL media and key to a system builder to
     facilitate the downgrade on their own systems.
    2.Insert the downgrade-eligible version of Windows media in the CD drive and follow the installation instructions.
    3.Type the product key.
    •If the software was previously activated, you will not be able to activate it online. In this case, the appropriate local Activation Support phone number will be displayed.
     Call the number and explain the circumstances. When it is determined that the end user has an eligible Windows license, the customer service representative will provide a single-use activation code to activate the software. Please note that Microsoft
    does not provide a full product key in this scenario.
    4.Activate the software.

  • Yoga Pro 3 Touch Pad Not Working With Win10

    This has been hinted around in several other YOGA Pro 3 WIN 10 upgrades but we probably need to start splitting out each particular issue. My upgraded to Win10 with no issues on the upgrade itself. I performed the upgrade with a mouse attached and now I no longer an switch back to using the touch pad. Another way to say it is that my Fn + Delete button no longer works. I checked Synaptics for a driver but they don't list one for Win10. Any one know a work around to get the touch pad working again or a suggestion to fix? Thanks

    I'm in the same boat - no touchpad after upgrade. I am sure we are the first of thousands to experience this issue.

  • Trouble with Adobe Reader Touch on Lenovo Yoga Pro 2 in tablet mode. Pdf shows up as blank pages.

    I have a Lenovo Yoga Pro 2 and when I change it to tablet mode and use the Adobe Reader Touch app, my pdf shows up as a blank page. I have installed other pdfs in the past and those show up fine. However, as of three days ago, whatever pdf I install shows up as blank on my screen. Is there a solution to fix this?

    Could you please share your test file?
    You can send the file at [email protected]

  • What type of ssd does yoga pro 3 have?

    Is it MLC or TLC? I heard people say yoga pro 3 uses sumsung SSD, and sumsung like using TLC which i dont prefer.

    Samsung or LITE-ON, per the Hardware Maintenance Manual:
    http://download.lenovo.com/consumer/mobiles_pub/lenovo_yoga_3_pro_1370_hmm.pdf
    I don't work for Lenovo. I'm a crazy volunteer!

  • Yoga Pro 3 - Wifi dropped connections; refuses to reconnect

    First day of owning my Yoga Pro 3. Has anyone experienced intermittent wifi failures?
    I've had trouble on both access points that I have at home. One is an older 802.11b router (set to channel 1), and other a D-Link815 dual-band bgn router (with the 2.4Ghz radio set to channel 11). 
    I've experienced problems using both routers on either channel and when using the 5Ghz spectrum as well.
    Connectivity with either access point lasts from 5 mins to 30+ mins (in limited time I had available to use it so far).
    Far more frustrating is that when dropped, the YP3 refuses to reconnect. Manually selecting the access point in the network connections charm and clicking "Connect" results in failed attempts at connecting and system will refuse to connect to any Access Point for a random amount of time. At one point I had attempted to reconnect about 20+ times before it did reconnect.
    Obviously, tried rebooting without any change in behavior.
    I uninstalled the Broadcom wireless driver (the system the auto-installed a Microsoft driver which, from the version number, appeared to be an older version of the same Broadcom driver as they used a very similar numbering scheme and were very close). No change. I reverted that change.
    Are there known issues with these wifi cards/drivers accessing open wifi connections? I live in the middle of no-where, so have had no compelling reason to secure the access points.
    What else should I try?
    Thanks

    My WiFi connects fine @ 2.4 GHz only Access Point (netgear wnr2000 v2) 4 rooms away (~ 35 feet and my Linksys router is on the same room as me so I get 866.5 Mbps all the time), giving me fluctuating connection speed from 243 to 300 Mbps. I generally don't use the 2.4 GHz band but I occasionally try it to check for stability. It's working fine but there's too much 2.4 GHz clients in our area so I use 5 GHz for Netflix, Hulu steaming where low latency stability is needed.
    Definitely try reseating the antenna so you can rule that out. If you still can't connect @ 2.4 GHz, try other 2.4 Ghz access points or it's just that you get a defectve Broadcom 4352 card or it might be even Windows 8.1 drivers itself.
    Lenovo Y470: i7-2670QM | 8 GB DDR3 1333 MHz RAM | Nvidia GeForce GT 550M | 500 GB 7200 RPM Seagate HDD | ASUS PCE-AC56 802.11ac Network Adapter | Windows 7 Professional 64-bit

  • After upgrading from win 7 - win 8, do I really need the win 7 recovery partition?

    Hello.
    I'm a happy camper after upgrading my HP Spectre XT from win 7 to win 8 (Win 8 upgrade offer). The 128GB SSD disks just makes everything so smooth and fast.
    However I am abit annoyed with the Win 7 recovery partition that still uses 20 GB of my total 128GB space.
    I have tried searching the forums, as well as the www for any good answers, but I end up more confused.
    So I am asking the community some questions that interests me, and hopefully you can provide me with some meaningsful answers
    1. Can I now delete my win 7 recovery partition, and if so what is the most effiecient and safe way to do it?
    2. Is there a a good way to make sure that if (heaven forbid) something would happen, I still would be able to recover my notebook preferably to win 8, and not the preinstalled OEM win 7?
    3. Of course the Spectre XT has no optical drive, so if its doable I might need to make an win 8 recovery partition in the end. Is it possible? 

    You can use Windows builtin Disk Management to delete the partition, or EaseUS software. Both procedures are outlined at EaseUS site:
    http://www.partition-tool.com/resource/windows-8-partition-manager/delete-windows-8-partition.htm
    As for a Recovery option after deleting, look at System Imaging which is builtin Windows 8 also.You need an external USB hdd for this.
    http://www.eightforums.com/tutorials/8956-system-image-create-windows-8-a.html
    ******Clicking the Thumbs-Up button is a way to say -Thanks!.******
    **Click Accept as Solution on a Reply that solves your issue to help others**

  • Yoga Pro 2 - Display not recognized in windows (Driver or Hardware issue?)

    Out of warranty by a month!
    Yoga Pro 2 - 256gb, installed new wireless card a month ago. Windows 8.1
    The touchscreen still works while the screen is black.
    System restarted after sleep mode I think.
    The Lenovo logo is displayed, seems to load windows, but when windows loads (I don't see it load so this is an assumption) the screen blanks and the black light is on.
    I can connect an external monintor which will connect after a return from sleep mode(odd). Which then turns the backlight off.
    When on the external monitor the internal display is not even recognized by windows.
    When I boot in safe mode, the internal screen works fine with of course limited capability.
    I have reloaded display drivers from the support site.
    Right now my internal monitor is not recognized by windows and is dark, and I can use an external monitor.
    Anyone have any clues as to what my be going on? Hardware, driver etc???
    What information can I provide?
    Solved!
    Go to Solution.

    This is a pretty weird issue with conflicting observations.
    1) Screen works in Safe Mode but not in regular boot. (So, not hardware issue)
    2) Display works on external monitor in regular mode. (So, not drivers issue)
    Did you install the wireless card yourself? Did you unplug the display cable while installing the card?
    Could you re-open and check that all connections are good?
    Is the Wi-Fi card working well?
    I would also recommend a complete reset of the laptop to eliminate the possibility that this is a corrupt driver. You can use the NOVO button to reset your laptop. Make sure to make a backup on external drive for your personal files.
    Current System - Lenovo Y510P, GT755M SLI, 8GB RAM, 1TB HDD + 24GB SSD
    When your plans fail, your Real Story begins!!

  • Oracle Database 10g Enterprise version supported on Win 2003/Win 2008?

    Hi,
    The Current version of SAP we are using is SAP R/3 Enterprise 4.7 version (operating system- WINDOW NT )and the database is Oracle Database 10g Enterprise Edition Release 10.2.0.4.0 u2013 Prod
    Please help to advice me:
    Can currently running version of oracle database be supported on Win 2003/Win 2008?
    Can SAP application support the existing oracle database server upgrade to Windows 2003/Win 2008?
    Is it possible to have Oracle database separated to other server on SAP DEV and SAP QA?
    Many thanks in advance.

    Hi,
    You can get more clarity in the [Product Availability Matrix|http://service.sap.com/pam].
    The following notes can help u better.
    [Note 1383873 - Windows Server 2008 R2 Support|https://websmp230.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/sapnotes/index2.htm?numm=1383873]
    [Note 1303262 - Oracle on Windows Server 2008|https://websmp230.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/sapnotes/index2.htm?numm=1303262]
    Hope this helps.
    Regards,
    Varadharajan M

Maybe you are looking for

  • Uegent,,,,,,,Table control

    Hi there, I have got an requirement, which display final output in 3 different display modes, for this there are 3 radio buttons in selection-screen. 1. Abap list display 2. List weaver display 3. Table control display if pa_alist = 'X'. perform abap

  • Reg: JDBC -- RFC Sync call

    Hi All, I have created a scenario between JDBC and SAP, which is a synchronous communication. In SXMB_MONI and in communication channel monitoring it is successful. JDBC synchronous communication channel is able to fetch the data, However it is not a

  • E55 System Error when connecting wireless

    Hi Guys, I bought a new E55 10 days ago and has been giving this "system error!" when connecting wireless network. any ideas to solve this problem? Thanks in advance..

  • Guitar Rig 2 - HELP PLEASE!!

    Alright brothers, I know this is the Logic forum, I don't doubt that for an instant. But when a company with the reputation for quality such as native instruments drops the ball on offering the simplest bit of gratitude for purchasing their product -

  • Can't login even after resetting password using install disk

    I have been unable to login in using the password on this computer. Twice now I have reset the password using the install disk that came with the computer. After resetting. I quit the installer and then reboot using the computer's startup disk. When