Yoga 2 pro slow in other modes in win 10

I have just upgraded to windows 10 and I have noticed that the Yoga 2 is really slow with the CPU throttled down to 770Mhz all the time when in any other mode(tent, tablet etc) than the usual laptop mode. Anyone with the same problem and how to solve it? Have read some similar threads after the upgrade to win 8 to win8.1 where the problem was the DPTF driver but do not know how to fix it now..

Have you tried updating DPTF driver from Lenovo's website ?
This was indeed well known issues with yoga series in windows 8.1. I have also just upgraded to windows 10. What I did was updating the driver. The last driver from Lenovo's site was version 7.1.0.21 03 dated 7/6/2015. I had no problem whatsoever. The CPU was never throttled to 770 Mhz in tablet mode, tent mode nor stand mode. I have checked all the modes. In fact, I see no performance issues on these modes. Although it might be too early to say as I just updated the driver earlier today. Another solution might be by completely disabling DPTF from BIOS setup. You can enter the BIOS setup by pressing the button next to power button while the laptop is off. Howeer, I see no advantage of it for now. My Yoga 2 Pro now is now actually runing cooler. For the record, I have also disabled DPTF when I was on Windows 8.1. But I noticed, the fan sometimes is making noise even when I am only surfing the web. Now that I am on Windows 10, I can say that enabling back the DPTF helps the fan to run without making much noise.
Wish you best of luck.

Similar Messages

  • Trouble with Adobe Reader Touch on Lenovo Yoga Pro 2 in tablet mode. Pdf shows up as blank pages.

    I have a Lenovo Yoga Pro 2 and when I change it to tablet mode and use the Adobe Reader Touch app, my pdf shows up as a blank page. I have installed other pdfs in the past and those show up fine. However, as of three days ago, whatever pdf I install shows up as blank on my screen. Is there a solution to fix this?

    Could you please share your test file?
    You can send the file at [email protected]

  • Ready to install fresh win 8.1 on new Yoga Pro 2

    So, I just got my yoga pro 2 Friday. Can't stand the extra stuff and 7 particians. 
    I've got a usb stick with a copy of win 8.1 on it. I can boot to it and get the windows installer started ( I stopped at the partiican table)
    I got the drivers folder from the D: on the yoga backed up.
    Got my win 8.1 pro product key written down.
    Don't think I will need any of the lenovo apps.
    Nothing else I need, right?  I did actually make a system image of the fresh install on another external drive when I got it, so if i did need to go back, I can.
    The windows installer will take care of all partiicans, correct? I'm new to EUFI boot.  I can see that legacy mode is disabled in the bios now.
    Thanks for any help. Looking forward to a clean install.  Wish I could have gotten this from a MIcrosoft store instead so I don't have to deal with it.
    Solved!
    Go to Solution.

    seems you're already ready.

  • Macbook pro runs really slow after sleep mode

    My MBP ( MacBook Pro (13-inch, medio 2012), 2,5 GHz Intel Core i5, 8 GB 1600 MHz DDR3, Intel HD Graphics 4000 1024 MB), runs very slow after sleep mode. I notice that when I wake it up, my memory usage is nearly 8 GB. After a restart it is back no a normal level, between 2 and 5 GB depending on how many programs I am running. Any ideas what causes this? My IOS is Yosemite 10.10.2
    Kind regards

    Hi Japib
    Thanks for your reply. Here is my report:
    Problem description:
    macbook pro is really slow after sleep mode
    EtreCheck version: 2.1.8 (121)
    Report generated 4 februari 2015 20:56:34 CET
    Download EtreCheck from http://etresoft.com/etrecheck
    Click the [Click for support] links for help with non-Apple products.
    Click the [Click for details] links for more information about that line.
    Hardware Information: ℹ️
        MacBook Pro (13-inch, Mid 2012) (Technical Specifications)
        MacBook Pro - model: MacBookPro9,2
        1 2.5 GHz Intel Core i5 CPU: 2-core
        8 GB RAM Upgradeable
            BANK 0/DIMM0
                4 GB DDR3 1600 MHz ok
            BANK 1/DIMM0
                4 GB DDR3 1600 MHz ok
        Bluetooth: Good - Handoff/Airdrop2 supported
        Wireless:  en1: 802.11 a/b/g/n
        Battery Health: Normal - Cycle count 172
    Video Information: ℹ️
        Intel HD Graphics 4000
            Color LCD 1280 x 800
    System Software: ℹ️
        OS X 10.10.2 (14C109) - Time since boot: 1:36:41
    Disk Information: ℹ️
        APPLE HDD TOSHIBA MK5065GSXF disk0 : (500,11 GB)
            EFI (disk0s1) <not mounted> : 210 MB
            Recovery HD (disk0s3) <not mounted>  [Recovery]: 650 MB
            Macintosh HD (disk1) / : 498.88 GB (292.17 GB free)
                Encrypted AES-XTS Unlocked
                Core Storage: disk0s2 499.25 GB Online
        MATSHITADVD-R   UJ-8A8 
    USB Information: ℹ️
        Apple Inc. BRCM20702 Hub
            Apple Inc. Bluetooth USB Host Controller
        Apple Inc. Apple Internal Keyboard / Trackpad
        Apple Computer, Inc. IR Receiver
        Apple Inc. FaceTime HD Camera (Built-in)
    Thunderbolt Information: ℹ️
        Apple Inc. thunderbolt_bus
    Gatekeeper: ℹ️
        Mac App Store and identified developers
    Kernel Extensions: ℹ️
            /Library/Application Support/Hotspot Shield
        [not loaded]    com.anchorfree.tun (1.0.1) [Click for support]
            /Library/Application Support/Kaspersky Lab/KAV/Bases/Cache
        [loaded]    com.kaspersky.kext.kimul.44 (44) [Click for support]
        [loaded]    com.kaspersky.kext.mark.1.0.5 (1.0.5) [Click for support]
            /Library/Extensions
        [loaded]    com.kaspersky.kext.klif (3.0.4a41) [Click for support]
        [loaded]    com.kaspersky.nke (1.6.4a15) [Click for support]
            /System/Library/Extensions
        [loaded]    com.hzsystems.terminus.driver (4) [Click for support]
        [not loaded]    com.olympus.CamBlockCommandsDeviceUP (3.1.0 - SDK 10.6) [Click for support]
        [not loaded]    com.roxio.BluRaySupport (1.1.6) [Click for support]
        [not loaded]    com.sony.driver.prs2 (1.0.3d1) [Click for support]
        [not loaded]    com.wacom.kext.pentablet (5.3.3 - SDK 10.8) [Click for support]
            /Users/[redacted]/Library/Services/ToastIt.service/Contents/MacOS
        [not loaded]    com.roxio.TDIXController (2.0) [Click for support]
    Launch Agents: ℹ️
        [running]    com.epson.Epson_Low_Ink_Reminder.launcher.plist [Click for support]
        [failed]    com.epson.esua.launcher.plist [Click for support] [Click for details]
        [running]    com.epson.eventmanager.agent.plist [Click for support]
        [running]    com.kaspersky.kav.gui.plist [Click for support]
        [not loaded]    com.sony.ReaderDesktop.RunReaderDesktop.plist [Click for support]
        [not loaded]    com.trusteer.rapport.rapportd.plist [Click for support]
        [running]    com.wacom.pentablet.plist [Click for support]
    Launch Daemons: ℹ️
        [loaded]    com.adobe.fpsaud.plist [Click for support]
        [loaded]    com.anchorfree.ajaxserver.plist [Click for support]
        [running]    com.kaspersky.kav.plist [Click for support]
        [loaded]    com.microsoft.office.licensing.helper.plist [Click for support]
        [loaded]    com.oracle.java.JavaUpdateHelper.plist [Click for support]
        [running]    com.trusteer.rooks.rooksd.plist [Click for support]
        [loaded]    com.tunnelbear.mac.tbeard.plist [Click for support]
    User Launch Agents: ℹ️
        [loaded]    com.adobe.ARM.[...].plist [Click for support]
        [loaded]    com.google.keystone.agent.plist [Click for support]
        [loaded]    com.macpaw.CleanMyMac2Helper.diskSpaceWatcher.plist [Click for support]
        [running]    com.spotify.webhelper.plist [Click for support]
        [loaded]    com.valvesoftware.steamclean.plist [Click for support]
    User Login Items: ℹ️
        iTunesHelper    Programma  (/Applications/iTunes.app/Contents/MacOS/iTunesHelper.app)
        Documenten    Map  (/Users/[redacted]/Documents)
        uTorrent    UNKNOWN  (missing value)
        BambooCore    UNKNOWN  (missing value)
        BambooCore    UNKNOWN  (missing value)
        BambooCore    UNKNOWN  (missing value)
        BambooCore    UNKNOWN  (missing value)
        BambooCore    UNKNOWN  (missing value)
    Internet Plug-ins: ℹ️
        JavaAppletPlugin: Version: Java 7 Update 60 Check version
        WacomNetscape: Version: 2.1.0-1 - SDK 10.8 [Click for support]
        Default Browser: Version: 600 - SDK 10.10
        WacomTabletPlugin: Version: WacomTabletPlugin 2.1.0.2 [Click for support]
        AdobePDFViewerNPAPI: Version: 11.0.10 - SDK 10.6 [Click for support]
        FlashPlayer-10.6: Version: 16.0.0.296 - SDK 10.6 [Click for support]
        Silverlight: Version: 5.1.30514.0 - SDK 10.6 [Click for support]
        Flash Player: Version: 16.0.0.296 - SDK 10.6 [Click for support]
        QuickTime Plugin: Version: 7.7.3
        SharePointBrowserPlugin: Version: 14.4.7 - SDK 10.6 [Click for support]
        AdobePDFViewer: Version: 11.0.10 - SDK 10.6 [Click for support]
        MeetingJoinPlugin: Version: Unknown - SDK 10.6 [Click for support]
    User internet Plug-ins: ℹ️
        Google Earth Web Plug-in: Version: 7.1 [Click for support]
    Safari Extensions: ℹ️
        AdBlock
        DuckDuckGo
        Save to Pocket
        Awesome Screenshot
        URL Advisor
        Virtual Keyboard
    3rd Party Preference Panes: ℹ️
        Flash Player  [Click for support]
        Squeezebox  [Click for support]
        Trusteer Endpoint Protection  [Click for support]
    Time Machine: ℹ️
        Auto backup: YES
        Volumes being backed up:
            Macintosh HD: Disk size: 498.88 GB Disk used: 206.70 GB
        Destinations:
            My Passport [Local]
            Total size: 999.83 GB
            Total number of backups: 17
            Oldest backup: 2013-11-06 17:55:38 +0000
            Last backup: 2014-10-14 11:30:39 +0000
            Size of backup disk: Adequate
                Backup size 999.83 GB > (Disk used 206.70 GB X 3)
    Top Processes by CPU: ℹ️
            15%    mds
             5%    WindowServer
             0%    ocspd
             0%    fontd
             0%    kav
    Top Processes by Memory: ℹ️
        223 MB    kav
        198 MB    Safari
        155 MB    Mail
        137 MB    mds_stores
        77 MB    WindowServer
    Virtual Memory Information: ℹ️
        3.45 GB    Free RAM
        3.05 GB    Active RAM
        1.11 GB    Inactive RAM
        974 MB    Wired RAM
        1.64 GB    Page-ins
        0 B    Page-outs
    Diagnostics Information: ℹ️
        Feb 4, 2015, 07:21:16 PM    /Users/[redacted]/Library/Logs/DiagnosticReports/EPSON Software Updater Agent_2015-02-04-192116_[redacted].crash
        Feb 4, 2015, 07:18:08 PM    Self test - passed
    Hope this will shed some light on the problem.

  • New user of Yoga pro 3 : trackpad gestures and win 10

    Dear all,  I just got my Yoga pro 3 and coming from a Mac, I am a bit lost (I use Win 7 at work). One thing that I miss the most is the track pad, although the Yoga's seems to be quite good. However, I thought there would be 2-3 finger gestures, and apart from 2-fingers scroll, which is fine, I haven't found anything. Do I need to install something? The thing I really need is a 2-finger Right click, as in a Mac (I am so used to it!)...the rest I can live without.
    FInally, I was thinking about upgrading to Win 10: do you recommend it? Is it worth it? Also, how to do it? I thought I would get a "Get Windows 10" icon (my wife does in her 4 years old laptop) but I do not.
    Thanks for your help!

    Thanks !  Indeed it works but I must press really hard! I was more thinking of something like the 1-finger press but I guess I wil make do with it...

  • Mid 2010 macbook pro slow to sleep. No print queu issues.

    Hey everyone! My Mid 2010 macbook pro slow is slow to go to sleep. I have read several community forums and I've checked for old print jobs (which seems to be a common issue) and have found none. I've also reset all printers and jobs.  Anyways, it takes 35 to 60 seconds to go sleep (until fan/harddrive turns off/I see blinking white light).  This slow sleep occurs even with a complete fresh install of Mavericks, and even after installing a new SSD. I am honestly at a loss.
    I did the "pmset -g log" command and I have found two reoccurring things that I think might be the reason (though I don't really understand it fully). I commonly see "TimedOut InternalPreventSleep "com.apple.powermanagement.darkwakelinger" 00:00:15" commonly and "PreventUserIdleSystemSleep "Address Book Source Sync" 00:00:30".  I have bolded both of these below:
    id:0xa00000a7a [System: DeclUser kDisp]         
    2/11/15, 9:16:49 AM EST                      Summary- [System: No Assertions] Using Batt                                         
    2/11/15, 9:37:59 AM EST  Assertions          PID 17(powerd) Created InternalPreventSleep "com.apple.powermanagement.darkwakelinger" 00:00:00  id:0xe00000bb5 [System: DeclUser SRPrevSleep kCPU kDisp]         
    2/11/15, 9:38:14 AM EST  Assertions          PID 17(powerd) TimedOut InternalPreventSleep "com.apple.powermanagement.darkwakelinger" 00:00:15  id:0xe00000bb5 [System: DeclUser SRPrevSleep kCPU kDisp]         
    2/11/15, 9:38:14 AM EST  Assertions          PID 17(powerd) Released InternalPreventSleep "com.apple.powermanagement.darkwakelinger" 00:00:15  id:0xe00000bb5 [System: DeclUser SRPrevSleep kCPU kDisp]         
    2/11/15, 9:38:14 AM EST                      Summary- [System: DeclUser kDisp] Using Batt                                        
    Sleep/Wakes since boot at 2/8/15, 8:52:21 PM EST   :18   Dark Wake Count in this sleep cycle:0
    UUID: 09576726-5A6B-4848-82C1-8613E9381C59
    2/8/15, 4:48:35 PM EST   Sleep               Software Sleep pid=59: Using BATT (Charge:67%)                             11558 secs
    2/8/15, 4:48:39 PM EST   SlowResponse        PMConnection: Response from com.apple.apsd is slow (powercaps:0x0)                   4495 ms  
    2/8/15, 4:48:39 PM EST   WakeRequests        Clients requested wake events: None                                                 
    2/8/15, 8:01:13 PM EST   Wake                Wake [CDNVA] due to EC LID0/HID Activity: Using BATT (Charge:63%)                   
    2/8/15, 8:01:13 PM EST   SlowResponse        Kernel: Response from powerd is slow (powercaps:0x0)                                 4508 ms  
    2/8/15, 8:01:43 PM EST   Assertions          PID 426(AddressBookSour) Released PreventUserIdleSystemSleep "Address Book Source Sync" 00:00:30  id:0x100000254 [System: DeclUser kDisp]         
    2/8/15, 8:01:43 PM EST   Assertions          PID 171(UserEventAgent) Released BackgroundTask "com.apple.AddressBook.ScheduledSync" 00:00:30  id:0xc00000255 [System: DeclUser kDisp]         
    Does anybody have any ideas? Fixes? I am flummoxed.  Thanks!

         Reset PRAM.  http://support.apple.com/kb/PH18761
         Reset SMC.     http://support.apple.com/kb/HT3964
       Choose the method for:
       "Resetting SMC on portables with a battery you should not remove on your own".
          Start up in Safe Mode.  http://support.apple.com/kb/PH14204?viewlocale=en_US
      Best.

  • Program runs in win 7-64 Pro BUT will not run in win 7 home or vista.

    Program runs in win 7-64 Pro BUT will not run in win 7 home or vista.
    I'm testing 32bit software that will run in 7-64 Pro but will not in win 7 home premium or vista.
    The 7-64 Pro machine is NOT running the program in XP mode although is is being run as admin. The 7 home premium and vista beta testers have tried every work around/mode, admin mode, and anti-virus exception. I've run process explorer & WinMerge to evaluate
    the differences between os operations & dlls loaded but am unable to find the OS issue.
    Currently 2-win7-64 machines, 1 vista machine and 1 win 7 machine had no issues with the program as it started up and ran immediately.
    After 3 beta's 30 hours of testing & 50 of my own, I believe I've narrowed the issue down to the win 7 home premium and vista os's.
    Can anyone here suggest other ways to further narrow it down so as to provide functionality on all 3 os's?

    You must provide the exact name and version of the software for anyone to attempt to answer your question.  Primarily the functionality of any software is entirely dependent on what platforms the publisher intended the software to run on.
    If you are the programmer you need to go to the Microsoft Developer Network forums for assistance:
    http://msdn.microsoft.com/en-US/#fbid=Xt631zR1D90.
    This is an End Users' Peer-to-Peer forum that does not address programming from any perspective.
    Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. ”

  • Yoga Pro 2 - Display not recognized in windows (Driver or Hardware issue?)

    Out of warranty by a month!
    Yoga Pro 2 - 256gb, installed new wireless card a month ago. Windows 8.1
    The touchscreen still works while the screen is black.
    System restarted after sleep mode I think.
    The Lenovo logo is displayed, seems to load windows, but when windows loads (I don't see it load so this is an assumption) the screen blanks and the black light is on.
    I can connect an external monintor which will connect after a return from sleep mode(odd). Which then turns the backlight off.
    When on the external monitor the internal display is not even recognized by windows.
    When I boot in safe mode, the internal screen works fine with of course limited capability.
    I have reloaded display drivers from the support site.
    Right now my internal monitor is not recognized by windows and is dark, and I can use an external monitor.
    Anyone have any clues as to what my be going on? Hardware, driver etc???
    What information can I provide?
    Solved!
    Go to Solution.

    This is a pretty weird issue with conflicting observations.
    1) Screen works in Safe Mode but not in regular boot. (So, not hardware issue)
    2) Display works on external monitor in regular mode. (So, not drivers issue)
    Did you install the wireless card yourself? Did you unplug the display cable while installing the card?
    Could you re-open and check that all connections are good?
    Is the Wi-Fi card working well?
    I would also recommend a complete reset of the laptop to eliminate the possibility that this is a corrupt driver. You can use the NOVO button to reset your laptop. Make sure to make a backup on external drive for your personal files.
    Current System - Lenovo Y510P, GT755M SLI, 8GB RAM, 1TB HDD + 24GB SSD
    When your plans fail, your Real Story begins!!

  • I occasionally have issues waking my macbook pro up from sleep mode and have to restart the computer. The apple store replaced the sleep part but the problem is still there

    I occasionally have issues waking my macbook pro up from sleep mode resulting in my need to restart the computer. I dislike all of my programs opening at once when I do get the computer started becasue it slows the cpu down. The apple store replaced the sleep part but the problem is still there. Note: i never had this problem with snow leopard

    I'm not certain but my new MBA 13...when in sleep mode comes back on from a black screen when I simply click on the left mouse button. Also, one time I did a SECURE EMPTY TRASH on files that totalled more than 1GB and it took so long that the fan kept increasing in speed so I pressed on the POWER button and the MBA shut...I was able to boot up with no problem. As a rule, I now only do secured erases for trash bin data totalling 500mb or less...anything above that gets a regular erase (dump).

  • Yoga Pro 3 Touch Pad Not Working With Win10

    This has been hinted around in several other YOGA Pro 3 WIN 10 upgrades but we probably need to start splitting out each particular issue. My upgraded to Win10 with no issues on the upgrade itself. I performed the upgrade with a mouse attached and now I no longer an switch back to using the touch pad. Another way to say it is that my Fn + Delete button no longer works. I checked Synaptics for a driver but they don't list one for Win10. Any one know a work around to get the touch pad working again or a suggestion to fix? Thanks

    I'm in the same boat - no touchpad after upgrade. I am sure we are the first of thousands to experience this issue.

  • Yoga Pro 2 questions

    So I'm really interested in a Yoga Pro 2 (especially with the sale on at BB this week)...however, I have a couple questions about it:
    1)  I already know about the yellow problem - hoping it's resolved soon but its keeping me on the fence about this one vs. a Sony
    2)  The resolution has forced some apps to have extremely small text...from what I read it's mainly in "Desktop" mode.  Can someone confirm this ?  I haven't had much chance to use Windows 8 yet so haven't seen Desktop vs. Start mode compared.  In what instances would Desktop be used ?
    3)  I'm still not sure about the exposed keys - from what I read Lenovo has some sort of case or protective cover for the keys ?  Can someone send me a link ?  How well does it work ?
    Thanks!

    swallman wrote:
    So I'm really interested in a Yoga Pro 2 (especially with the sale on at BB this week)...however, I have a couple questions about it:
    1)  I already know about the yellow problem - hoping it's resolved soon but its keeping me on the fence about this one vs. a Sony
    2)  The resolution has forced some apps to have extremely small text...from what I read it's mainly in "Desktop" mode.  Can someone confirm this ?  I haven't had much chance to use Windows 8 yet so haven't seen Desktop vs. Start mode compared.  In what instances would Desktop be used ?
    3)  I'm still not sure about the exposed keys - from what I read Lenovo has some sort of case or protective cover for the keys ?  Can someone send me a link ?  How well does it work ?
    Thanks!
    1. can mostly be worked around with the Energy Manager software. Even with that, the yellow is not perfect, but the issue has been massively overblown in my opinion. You'll have to see it for yourself and decide. It's a non-issue for me, personally.
    2. Yeah, they high res does reult in small fonts in some legacy apps. Probably poorly written ones for the most part. But it's a small minority of apps. I haven't run into any major problems, but where this happens, the touch screen is useless with those apps. you really need a mouse. I expect this will become less and less a problem as more high dpi laptops become mainstream and apps take this into account.
    3. The case is here: http://shop.lenovo.com/SEUILibrary/controller/e/web/LenovoPortal/en_US/catalog.workflow:item.detail?...
    I just received mine this morning. It's decent. Snugly fits the whole machine as a carrying case, or slips more loosely over the keyboard section when you're using it in the non-laptop modes. Haven't had a chance to use it much but it seems like it will be fine. There are cutouts for most of the ports, so things are mainly still accessible with the case on.

  • What type of ssd does yoga pro 3 have?

    Is it MLC or TLC? I heard people say yoga pro 3 uses sumsung SSD, and sumsung like using TLC which i dont prefer.

    Samsung or LITE-ON, per the Hardware Maintenance Manual:
    http://download.lenovo.com/consumer/mobiles_pub/lenovo_yoga_3_pro_1370_hmm.pdf
    I don't work for Lenovo. I'm a crazy volunteer!

  • Keystation Pro 88 (or other controller) as the Logic Control

    Has anybody got their setup like this? I've been trying to get this to work for the past 6 hours and no luck. Can someone please help me? Just bought Studio 2 days ago and haven't touched it yet cuz I can't get the keyboard to fully work.
    Joined: 17 Jan 2006
    Posts: 55
    Location: Los Angeles
    Posted: Sun Jul 15, 2007 12:03 am Post subject: Keystation Pro 88 (or other controller) as the Logic Control
    I'm sure some of you already know how to do this. I just figured I'd write this up at some point to share with others. The basic idea is to use the Keystaion Pro 88 (or some other MIDI Controller) as an actual Control Surface, or in this case the Logic Control, to have more freedom with the MIDI Controller, i.e. using the group of 8 faders (on the Keystation) to control Volume for tracks 1-8 in the arrange window, and then hitting Bank Right to automatically control tracks 9-16, and as a result making a universal controller not bound by specific channel messages, or MIDI CC Volume messages etc... in short the essence of any Control Surface.
    What I'm describing below is what this app will also do: http://www.opuslocus.com/lcxmu/index.php
    I basically just wanted to avoid using a separate application all together. Keep in mind that the app does simplify the whole process, but Logic inherently can do pretty much everything the app does.
    I recommend reading this in its entirety before attempting.
    KeyStation Pro 88 as Logic Control
    Part One: Add Logic Control as Control Surface
    1. Open Logic.
    2. Preferences / Control Surfaces / Setup...
    3. New / Install / Select your preferred device (in my case Logic Control
    4. Click the icon in the setup window for the Logic Control.
    5. On the left hand side under "Logic Control" you should see an "Out Port:" and "Input:" ... select the desired MIDI in/out through which your device is connected.
    6. Open Preferences / Control Surfaces / Controller Assignments. Make sure you select the "EXPERT VIEW" check box.
    7. You should now see a bunch of different Zones in the Zone column, one of which is "Control Surface: Logic Control"
    8. Create your own Zone, KeyStation Pro 88 (or whatever) using the Plus sign in the bottom left corner of the Controller Assignments window.
    9. Now basically go through the existing parameters already available in the Logic Control Zones, Select what you want. You can select entire Modes or individual Controls / Parameters. You can select multiple values (only multiple Control / Parameters NOT modes) by selecting and dragging or simply with select and holding command.
    10. Command-C the selected Modes and then click back onto you user zone that you created above.
    11. Click inside the Mode column (or Control / Parameter column depending upon what you selected and copied from the Logic Control zones).
    12. Command-V to paste the Modes into your user Zone.
    13. Do this for as many Modes / Controls you want, that your specific MIDI controller interface will be able to handle.
    Part Two: Assigning Input Values
    1. Open Preferences / Control Surfaces / Controller Assignments
    2. Now for each parameter that you copied, you will need to set the input MIDI value from your controller.
    3. Click on your User Zone, then Mode, then the first parameter in the 3rd column.
    4. You should see a "MIDI Input" option (this should already be set correctly as long as you set it earlier in Step 5 of Part One). If it's not set to the correct MIDI input (which I found to be the case sometimes even after Step 5), then change that here.
    5. Next to "Value Change:" you will see a box with MIDI data in it. Delete the existing date by highlight and delete.
    6. Activate "Learn Mode" (bottom right corner of Controller Assignments window) then click within the "Value Change" box, then move the corresponding fader, button etc. The "Value Change" should now show the MIDI data value for that fader. Be careful here, there should only be 3 groups of 2 for data here... if you see 2 groups, of 3 groups, of 2 then typically the FIRST group of 3 should be the value you want here. You can always delete the data, and move the fader again to be sure. The reason for the 2 groups of 3 is not in error: some buttons send TWO MIDI values, one on press and one on release. You can use this to your advantage and assign TWO different functions to these buttons, thus the first (press hold) value can do one thing and the second (release) value can do another. You can also change the MIDI controller to only send 1 message on press and nothing on release, or simply make sure that only the on value is present in the "Value Change" box.
    7. You'll have to do this for all the different knobs / faders etc. on your MIDI controller. There are many shortcuts of course. You can manually type in the Values if you know them. For the Keystation Pro, M-Audio has an app called Enigma that I recommend for changing controller parameters and much more on the Keystation. You can use this app to assign all the actual control data that each button or fader sends to the sequencer, once you know the values you can convert that data to the MIDI data values and enter them into the Value Change box.
    8. Once you're done assigning values to the controllers, you can delete all the Zones except for the user Zone you created earlier. Before you do this, it's a good idea to back up the Control Surface preference file just in case you ever want to grab something else from the Logic Control Zones. You could always add a second Logic Control and copy the Zone from that, but you'd have to reassign all the MIDI Input: values ... short version, just back up the preference file before you delete the Zones. The reason why you want to delete the Zones that you're not using is simply because if you have a controller that happens to send out MIDI data to the sequencer, and the actual Logic Control happens to have that MIDI data value already inherent it it's Zones, then you could be asking for trouble, simply put you'd be sending MIDI data to change Volume and the Logic Control maybe has that MIDI Data Value already assigned to Pan for the existing track.
    The file to backup is located here: ~Users/username/Library/Preferences/Logic/com.apple.logic.pro.cs
    As a precaution I have always backed up my Logic Preference file WITH this .cs file. Technically it's not necessary... for instance: Let's say you trash your preferences and open Logic to find that the Logic Control is missing from the Control Surfaces Setup. So you add it back and now you find out that Logic is missing the User Zone that you created. If you close Logic and copy the .cs file back to the directory above, then upon reopening Logic you should find your User Zone is in place again. But I've had mixed results with that, so just in case I copy over the preference file with the .cs file as a pair. It seems that the Logic pref file only contains information that the Logic Control is a Control Surface on your system and the .cs file is the preferences for that specific Surface.
    Another note: after a recent Logic update, maybe 7.2? ... it was whichever update added support for more Control Surfaces, I can't remember. This update basically erased all the hours of hard work linking the Keystation to Logic as the Logic Control. This only happened with this specific Control Surface update, but not with 7.2.3, probably simply because they didn't make any changes to the .cs pref file.
    Anyhow, when this happens again in the future, there seems to be a quick fix. I take NO responsibility for you somehow crashing Logic on a continual basis after applying the fix. Personally I have seen NO issues by doing this at all. I simply copied a version of the .cs file with the new update missing the Keystation Zone, as well as a version of the .cs file WITH the Keystation Zone, to a PC (I think it was a PC, don't believe I tried it with textedit, although should work as well). I opened both of the files in notepad and compared them. I noticed the word Keystation towards the bottom and realized that most all the data (gibberish) was exactly the same up until a point in which the file with the Keystation data had a group that was absent from the new .cs pref file from the new update. So I basically copied the data from the old .cs pref file, pasted it into the new .cs pref file, saved it and open Logic. Logic warned me that a pref file was corrupt or something of that nature, but loaded fine anyway, and the Keystation Zone was back in Controller Assignments.
    One last thing... the problem that some of you may run into is that by making your MIDI controller a Control Surface, or turning your Keystation Pro into a Logic Control, limits some of the functionality of the MIDI Controller. For instance, a Logic Control's main purpose is to control different faders, knobs and what not of MANY different tracks. When you move a fader for volume on the Logic control, it will move the fader corresponding to the selected track... it's not programed to say change the actual midi CC 7 for Volume, only the actual Fader. Thus, what if you want the MOD wheel to still control modulation and you want the sustatin pedal to continue to act as a sustain pedal. Well, if Logic sees that Port 1 is the input for the Logic Control, but in reality the Keystation, then it's only going to allow specific events through. The way around this issue is by using both the input options that the Keystation has... hook the MIDI out into Logic and use the USB port as well. I run the Keystation as a Logic Control through the USB port, and use the MIDI out for actual MIDI data. But the catch is you have to make sure you only connect the MIDI Port into Logic's sequencer in the environment. Thus open the environment, open Clicks & Ports, Port 1 and Port 2 are the IN/OUT for the USB port. Midi Port is the Keystation's MIDI port. Select and delete the cable for the SUM, and run individual cables for the ports you want to use. Thus, all your other MIDI interface Ports, the Caps Lock keyboard etc. Just be sure that if your using Port 1 (USB Port Out from Keystation) for the fake Logic Control, that it DOES NOT cable into the "Input View" or "to Recording & Thru". This creates yet another issue:
    The controls on the Keystation have to send SOME form of MIDI control message / data to Logic. Well if the faders on the Keystation are preset to send Ch1-9, Volume 0-127 messages, then when you move a fader on the Keystation (as the Logic Control) since the Keystation is still reaching the sequencer from the MIDI port, you will be sending MIDI values that can effect your current track possibly when you don't want to. The work around for this is to be sure that all the faders / knobs that you want to use as your fake Logic Control are sending useless MIDI data... i.e. CC 75, 76, 77, and so on. This way moving faders won't effect playback, although you could still in theory record this MIDI data into your sequencer. You could however filter this events from entering the sequencer input with a transformer since you know precisely what MIDI CC values you are changing. The easy way to assign these values is to use the program Enigma from M-Audio that I mentioned above.
    More discussion specifically related to the Keystation Pro 88:
    You can do a lot using the Controller Assignments and different Zones from the Logic Control. For instance, the real Logic Control has Solo, Mute, and Record buttons for the 8 faders. The Keystation Pro only has 1 button underneath each fader. But you could use one of the other buttons to toggle Solo, Mute, and Record mode so that depending on which mode your in, the buttons underneath each fader will correspond to Mute or Solo etc. By the way, a good setup from my experience is to use the first 8 faders of the Keystation as the track faders, and the final 9th fader for Master Volume. You can then set two of the buttons underneath the Knobs as Bank Left and Bank Right buttons to change the 8 fader tracks to correspond to the onscreen track groups of 8. Also don't forget that you can assign TWO functions to EACH button, since a button press can send a value of 127 and a button release can send a 00 value. So if you press and hold a button it can activate "Shift-select Mode" and until released it can make the buttons under the faders act as Volume to Zero resets or whatever you want. When you release the button it will go back to just Mute mode or Solo mode. The Controller Assignments window has MANY options, and parameters some of which are very confusing and take a lot of trial and error to understand... the manual helps a little but of course isn't perfect.

    I'm thinking about buying a Keystation Pro 88 (2nd hand) so I was googling around and found this:
    http://www.soundonsound.com/sos/Oct04/articles/keystation.htm
    [quote]
    I had some trouble getting the transport controls to work with Emagic's Logic, even when I loaded the 'Pro 88 Logic Preset.LSO' file on the supplied CD-ROM into Logic. I contacted the guys who designed and set up the Keystation here in the UK at the old Evolution offices, and between us we managed to work out what was going wrong. First of all, you need to enter the appropriate MIDI key commands in Logic's user preferences. These cannot be updated with an LSO file, so the commands have to be entered using the Learn Key function in Logic (see the screenshot below for the list we used). Then we discovered that the transport keys were toggling, which meant that only each second press of each key was actually working. It turned out that I had an early version of the Logic preset before this had been fixed, but the more recent one has been put on the M Audio web site for anyone else that needs it. It took about 30 seconds to change the output commands so that the buttons were no longer toggling.[/quote]
    Did you get it to work correctly eventually?

  • Yoga Pro 3 - Wifi dropped connections; refuses to reconnect

    First day of owning my Yoga Pro 3. Has anyone experienced intermittent wifi failures?
    I've had trouble on both access points that I have at home. One is an older 802.11b router (set to channel 1), and other a D-Link815 dual-band bgn router (with the 2.4Ghz radio set to channel 11). 
    I've experienced problems using both routers on either channel and when using the 5Ghz spectrum as well.
    Connectivity with either access point lasts from 5 mins to 30+ mins (in limited time I had available to use it so far).
    Far more frustrating is that when dropped, the YP3 refuses to reconnect. Manually selecting the access point in the network connections charm and clicking "Connect" results in failed attempts at connecting and system will refuse to connect to any Access Point for a random amount of time. At one point I had attempted to reconnect about 20+ times before it did reconnect.
    Obviously, tried rebooting without any change in behavior.
    I uninstalled the Broadcom wireless driver (the system the auto-installed a Microsoft driver which, from the version number, appeared to be an older version of the same Broadcom driver as they used a very similar numbering scheme and were very close). No change. I reverted that change.
    Are there known issues with these wifi cards/drivers accessing open wifi connections? I live in the middle of no-where, so have had no compelling reason to secure the access points.
    What else should I try?
    Thanks

    My WiFi connects fine @ 2.4 GHz only Access Point (netgear wnr2000 v2) 4 rooms away (~ 35 feet and my Linksys router is on the same room as me so I get 866.5 Mbps all the time), giving me fluctuating connection speed from 243 to 300 Mbps. I generally don't use the 2.4 GHz band but I occasionally try it to check for stability. It's working fine but there's too much 2.4 GHz clients in our area so I use 5 GHz for Netflix, Hulu steaming where low latency stability is needed.
    Definitely try reseating the antenna so you can rule that out. If you still can't connect @ 2.4 GHz, try other 2.4 Ghz access points or it's just that you get a defectve Broadcom 4352 card or it might be even Windows 8.1 drivers itself.
    Lenovo Y470: i7-2670QM | 8 GB DDR3 1333 MHz RAM | Nvidia GeForce GT 550M | 500 GB 7200 RPM Seagate HDD | ASUS PCE-AC56 802.11ac Network Adapter | Windows 7 Professional 64-bit

  • Application suddenly very slow in debug mode?

    I have a WPF desktop application with 10 or so projects. I am using Visual Studio 10.0 SP1. All of a sudden, it has become extremely slow in debug mode - to the point that I can not even debug it.
    The same application runs just fine in debug mode on another pc where I am using Visual Studio 2013 Express. I am using SVN to keep the two copies in sync. No new software or windows update has been installed. Even nothing material has changed in the code.
    I looked at the VS debug options on both machines and there is no major difference - using default settings.
    Any idea what may be wrong? What should I look for?
    Thanks.

    I take it the path you're using hasn't changed?
    You didn't suddenly decide to work off a network drive or pick a very long path to the source ( yes that stuffs things up ).
    If you're using the same code and it works fine on one machine but not the other then your visual studio install is probably broke somehow on the slow machine.
    I would do an install > refresh.
    Please don't forget to upvote posts which you like and mark those which answer your question.
    My latest Technet article - Dynamic XAML

Maybe you are looking for