Yoga 2 Pro touchpad not recognized as precision touchpad on Windows 10

Hi all, I was really delighted to see Synaptics drivers being available for the Yoga 2 Pro for Windows 10 on your site yesterday. However, I am really confused to see that the Yoga 2 Pro touchpad is not recognized as a precision touchpad. Does the hardware not allow it or is it Synaptic's fault or what else? I'd really love to have these settings: http://twitter.com/Daniel_Rubino/statuses/617023404911239168The Synaptics driver you provide doesn't allow me to change what happens when I tap with 3 fingers (btw, Cortana isn't activated by your driver anyway - it simply doesn't work) and I'd like to select by myself what should happen when I swipe with 3 fingers. Why do you stick to the Synaptics driver settings, if it's integrated into Windows 10? Thanks for any help and best regardsSebastian

Also, 3 finger tap doesn't trigger Cortana over here... Please integrate the touchpad into Win 10 settings and let Windows handle all the stuff.

Similar Messages

  • My MacBook Pro is not recognizing my external hard drive.  The hard drive is listed in disk utilities but an icon does not pop up and I cannot access the data.  Is there any way to resolve this?

    My MacBook Pro is not recognizing my external hard drive.  The hard drive is listed in disk utilities but an icon does not pop up and I cannot access the data.  Is there any way to resolve this?

    WE know Disk Warrior is more reliable, hence more useful, and should be in any disk mechanics toolchest.
    For the record, I don't know anything of the kind. I have yet to see evidence that Disk Warrior is useful at all.
    What I do know is that you seem to take every opportunity you get to promote it in these forums. Do you work for Alsoft?
    Let me be a little more explicit. My opinion is that Disk Warrior is a waste of money if one has backups. If a journaled HFS directory is so badly corrupted that it can't be repaired by Disk Utility, then the volume should be reformatted and restored from backup, which has the same effect as running DW, but is probably faster and doesn't cost $99.

  • TS3694 My Ipod is not recognized by Itunes with my Windows 8 PC. Works fine with Windows 7 PC. Device sync test says "No device found". Already performed all of the Ipod device troubleshooting including reload Itunes, stop start Ipod device, changed drive

    Need help? Some of my Ipods are not recognized by Itunes with my Windows 8 PC. (Ipod Nano 4th gen  and Ipod Nano 6th gen), but on my Windows 7 PC, they work fine.  My Ipod 3rd gen and Ipod shuffle work both on Windows 8 and 7 PC's.  On the non-working Ipods, the  Device sync test says "No device found". Already performed all of the Ipod device troubleshooting including reload Itunes, stop start Ipod device, changed drive letter...
    any help is appreciated. Chris4sail

    Hello there, chris4sail.
    The following Knowledge Base article offers up some great step-by-step instructions on troubleshooting your iPod not being recognized in iTunes:
    iPod not recognized in My Computer and in iTunes for Windows
    http://support.apple.com/kb/ts1369
    Thanks for reaching out to Apple Support Communities.
    Cheers,
    Pedro.

  • Replaced keyboard bezel, but touchpad not recognized

    I have T410, Windows 7, BIOS 1.44 (recently updated) and a few days ago the touchpad buttons stopped working. I could move the cursor with the touchpad but I couldn't select anything by either tapping the touchpad or using any of the buttons. When I would disable the touchpad and selct the option of only using the trackpoint then the trackpoint (upper) buttons were fine (I'd lost the red rubbery thing for the trackpoint a while back so couldn't really stick with that option).
    So, I figured I must have messed up the buttons somehow (I suspect liquid or something although I don't remember having spilled anything). I ordered a new keyboard bezel and installed it, but now the computer does not recognize that the touchpad is installed at all. I tried installing new hardware but its not there, reinstalling the drivers but the install wizard says there's no Synaptics device installed. When I press Fn and F8 I get the message that I must enable the trackpoing and touchapd in BIOS. I went into BIOS but under Configure - Keyboard/Mouse there is nothing at all about trackpoint or touchpad (just some fn and cntrl options). (My BIOS is unusually slow when moving between the different categories for some reason too)
    I thought maybe the wires that connect the touchpad are the culprit but with the old bezel the touchpad could still move the cursor so I'm thinking it must be something else.
    I'm using a wireless mouse without a problem, but having dropped $80 on the new touchpad, I really want to make it functional.
    Any help is appreciated.
    thanks!

    So, I got the trackpoint to work now by installing the Synaptics driver from their website. The touchpad is still not working. I'm even more convinced this is not a matter of corrupt BIOS but rather something else because after I installed the new keyboard bezel the trackpoint did not work either and could not be found in BIOS but now works with a new driver.
    I still can't install the Ultranav driver because I still get the message No synaptics device found.
    Any other ideas on how I can get the driver to recognize that the hardware is installed?

  • Officejet pro 8000 not recognizing brand new HP black ink cartridge

    Hi. My officejet pro 8000 is not recognizing a brand new HP brand black ink cartridge. The black ink indicator remains lit and it will not print. I have unplugged the printer, but this did nothing. It is wierd, when I open the door where the cartridges are, the light goes out, it only goes on again when I close that door. The printer was working perfectly until this . Any helpful hints? Thanks so much.

    Hello chx2,
    Welcome to the HP Forums!
    I understand your Officejet 8600 is not recognizing your brand new black ink cartridge. I will do my best to assist you! Please make sure this printer is plugged into a direct wall. I just want to see if this makes a difference.
    Next, please follow these steps in order:
    1) Remove all ink cartridges from the printer, then close the door
    2) Remove the power cord from the printer (Do not press the power button)
    3) Please clean the ink cartridges by following this HP document here. (Also, make sure you have completed all the steps from this document)
    4) Wait 60 seconds or more, then plug the power cord back in
    5) Wait for the printer to turn on completely, then install the ink cartridges
    6) Try to print a document
    Please post your results, as I will be looking forward to hearing from you.
    I worked on behalf of HP.

  • Dual Display on Mac Pro (2011) not recognized after Yosemite Upgrade

    I have  Mini Displayport-to-HDMI adapter that used to work fine until I upgraded to Yosemite (now running 10.10.2).  Now during boot up the main display flashes looking like it 'notices' the 1080 display resolution then quickly ignores it and the HDMI output is not recognized in the System Preferences Display window.  This Mac Pro has two Mini Displayport ports and both behave similarly. 
    The main display powered through the DVI port works fine
    Any suggestions to resolve ?

    Not sure how critical your dual display is to your work life, but if it is you may want to consider using a Matrox product. Google it and search their site for "DualHead2Go" adaptor. I've used their stuff since 2008 when I bought my MacBook Pro. Their software is always kept up to date with the latest Mac OS. I have been VERY pleased over the years. Food for thought if you can't get your current system to function properly.

  • Product code for acrobat X pro is not recognized.  how to activate

    HELP!!!!  I have the teacher/student edition for acrobat X.  I originally downloaded to desktop.  However, I now use laptop.  Since it has no drive, I downloaded the 30 day trial.  I have the serial number/activation code....but it is not recognized.  My trial has expired.  How do I get activate?

    Hi Lynn ,
    I would suggest you to kindly refer to the following link in order to get your product activated.
    https://helpx.adobe.com/x-productkb/policy-pricing/activation-deactivation-products.html
    Hope this will help.
    Regards
    Sukrit Dhingra

  • MB-Pro password not recognized, apple pw neither...ideas?

    MacBook Pro isn't recognizing my password. Tried to reset with Apple PW, and won't recognize current Apple pw, even tho same pw works fine on phone, etc... ideas? thanks!!

    If you're running Lion or Mountain Lion, boot into your Recovery partition by holding down the Command and R keys upon boot. Go under the Utilities menu and select Terminal. From Terminal type
    resetpassword
    you'll now enter the Reset Password app that will allow you to reset passwords for any account.
    That should do the trick.
    Clinton

  • OneLink Thinkpad Pro Dock not recognizing my 2 monitors

    Laptop Thinkpad X1Installed and connected the new OneLink Dock ProConnected 1st monitor to the DispPlay PortConnected 2nd montor to the DVI portHave ethernet cable and power cables plugged inRestarted the laptop Laptop is not recognizing my monitors.All USB ports, audio port, ehternet port are working fine.  Except for the monitors.  Tried switching the monitors.  no luck!(Monitors are working fine when directly connected to laptop) Please advise.Thanks 

    Same thing here! With a fresh userprofile it is working, but that's no option for me. Lot of work to restore all my settings...
    Any solutions?

  • HP laserjet p1102 not recognized after installati​on on windows 7 - 32bit

    Hello
    I need help with my hp laserjet p1102 installation, it's not working after installation.
    I get a message say's(usb device not recognized)
    can any one here get me a hint please??

    ahmed,
    What is the exact message? See these
    You could also download a fresh version of the install CD. Drivers per OS version
    I am a volunteer. I am not an HP employee.
    To say THANK YOU, press the "thumbs up symbol" to render a KUDO. Please click Accept as Solution, if your problem is solved. You can render both Solution and KUDO.
    The Law of Effect states that positive reinforcement increases the probability of a behavior being repeated. (B.F.Skinner). You toss me KUDO and/or Solution, and I perform better.
    (2) HP DV7t i7 3160QM 2.3Ghz 8GB
    HP m9200t E8400,Win7 Pro 32 bit. 4GB RAM, ASUS 550Ti 2GB, Rosewill 630W. 1T HD SATA 3Gb/s
    Custom Asus P8P67, I7-2600k, 16GB RAM, WIN7 Pro 64bit, EVGA GTX660 2GB, 750W OCZ, 1T HD SATA 6Gb/s
    Custom Asus P8Z77, I7-3770k, 16GB RAM, WIN7 Pro 64bit, EVGA GTX670 2GB, 750W OCZ, 1T HD SATA 6Gb/s
    Both Customs use Rosewill Blackhawk case.
    Printer -- HP OfficeJet Pro 8600 Plus

  • My iPod Shuffle 4th generation 2GB is not recognized by My Computer in Windows or under Devices in iTunes.

    Everyone has the same problems. My iPod has been plugged in properly, I have followed all the support suggestions but nothing works. HELP PLEASE!

    I have downloaded that utility but can not use it, as
    when I plug the shuffle into the USB port, it is not
    recognized by either computer I am using. I can not
    reset or restore, because in order to do that the
    computer would have to know the shuffle is plugged in
    and it doesnt. I have tried this on two different
    computers and get the same result, so I dont think
    its a computer issue, its an ipod issue. I also used
    to be albe to play the shuffle on the Xbox 360 and
    now can not.
    Just as a check, did you actually follow the THESE directions...EXACTLY?
    Using iPod shuffle Reset Utility
    1. Quit all running applications on your computer.
    2. Open the iPod shuffle Reset Utility.
    3. Connect iPod shuffle to a USB port on your computer. Do not connect iPod shuffle to a USB port on your keyboard or other non-powered USB hub.
    4. Click the Restore button. If prompted, enter an Admin user name and password.
    5. The restore process will start.
    6. When it is complete, quit iPod shuffle Reset Utility and open iTunes to sync music to your iPod shuffle.

  • My Ipod 2g is not recognized by my PC running Windows 8

    I submit the diagnostics of itunes aswell.
    Please help!!
    Microsoft Windows 8 x64 Business Edition (Build 9200)
    INTEL_ BGP6710J
    iTunes 11.0.2.26
    QuickTime not available
    FairPlay 2.3.31
    Apple Application Support 2.3.3
    iPod Updater Library 10.0d2
    CD Driver 2.2.3.0
    CD Driver DLL 2.1.3.1
    Apple Mobile Device 6.1.0.13
    Apple Mobile Device Driver not found.
    Bonjour 3.0.0.10 (333.10)
    Gracenote SDK 1.9.6.502
    Gracenote MusicID 1.9.6.115
    Gracenote Submit 1.9.6.143
    Gracenote DSP 1.9.6.45
    iTunes Serial Number 00EABC78060B9DA0
    Current user is not an administrator.
    The current local date and time is 2013-06-16 20:11:14.
    iTunes is not running in safe mode.
    WebKit accelerated compositing is enabled.
    HDCP is not supported.
    Core Media is supported.
    **** External Plug-ins Information ****
    No external plug-ins installed.
    **** Device Connectivity Tests ****
    iPodService 11.0.2.26 (x64) is currently running.
    iTunesHelper 11.0.2.26 is currently running.
    Apple Mobile Device service 3.3.0.0 is currently running.
    No Universal Serial Bus Controller found.
    No FireWire (IEEE 1394) Host Controller found.

    See:
    iOS: Device not recognized in iTunes for Windows
    Try another USB port and cable
    I would start with
    Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7
    Applies to W 8 to
    Run this to help if it identifies the cause
    iTunes for Windows: Device Sync Tests
    Have you tried on another computer to help determine if you have a computer or iPod problem?

  • Ipod not recognized in Itunes or in windows.

    I've been able to unfreeze my Ipod and restore and update the software using my laptop. However, my desktop, still does not recognize my IPOD nor does ITUNES on my desktop. I've read and followed the directions for what to do when this happens. Still it has not made a difference. Both of these computers use Windows XP and so I am baffled by the fact that my laptop worked easily and the other (my desktop) won't work with my IPOD at all. My music library is on my desktop and I'm disappointed that I can't access this.
    Suggetions or explanations?

    Hi Karen,
    It's a bit unusual that a laptop would be recognizing an iPod better than a desktop (usually, it's vice versa).
    That indicates that this might be a USB connection issue.
    Are you sure that your computer's USB drivers are up-to-date? If they are already updated, then you may need to reinstall those drivers.
    See this Knowledge Base article for details on that:
    iPod is not recognized properly by computer when USB drivers are not installed properly or are out of date
    Also, if that doesn't help, have you tried all of the suggestions here?:
    iPod missing in "My Computer" or in iTunes for Windows
    -Kylene

  • TS1538 my iphone 4s is not recognized by itunes in my windows pc.

    i follow the instruction in the article iOS: Device not recognized in iTunes for Windows, nothing happen. 
    is it something to do with the software?
    the cable-check, oz another iphone still can use it to connect to itunes in pc.
    reinstall the program-check,
    verify the apple mobile device-check
    restrart the aplle mobile device service-check
    verify the apple mobile device usb driver is installed-check
    no third party issue..
    what else?
    help me please

    Answering my own question this time since posting, found similar query and fixed it.
    Went to control panel in Windows 7, printers and devices, down at the bottom shows the device
    right clicked and chose troubleshoot. Turned out that the device drivers had not installed and the troubleshooter did
    that automatically. Problem solved. Then the device showed up in itunes.

  • My iPod Touch 5th Generation is not recognized at all on my windows 8 laptop nor on iTunes using Windows 8

    When I first got my iPod touch my windows 8 laptop would not recognize it. I had an unfortunate issue and had to replace my iPod. Even with this new iPod my laptop and iTunes do not recognize it. Is windows 8 compatible with the 5th Generation iPod? Are there device Drivers needed for my windows 8 computer to recognize the iPod touch? Any answers would be lovely.

    - Try another cable. Some 5G iPods were shipped with Lightning cable that were either initially defective or failed after short use.
    See:
    iOS: Device not recognized in iTunes for Windows
    I would start with
    Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7
    Applies to win 8
    Run this to help if it identifies the cause
    iTunes for Windows: Device Sync Tests
    Have you tried on another computer to help determine if you have a computer or iPod problem?

Maybe you are looking for

  • How to get Portal User Context  in Web Dynpro application

    I have successfully integrate a web dynpro app into SAP Netweaver Portal. Within my web dynpro app, how can I get portal user context information such as first name, last name, job title or some newly created ume attibutes. Is there any programmatica

  • Date Field in Hierarchical ALV

    Hello Friends, I have a few fields in my Hierarchical ALV output which are initially hidden. When I choose to display these fields by changing the Layout the date fields come out in the form MMDDYYYY I need those fields as  MM/DD/YYYY The date fields

  • MusicMatch Playli

    I dragged my playlist from MusicMatch to my MuVo Tx FM and the order of the playlist was not maintained. Is there some way to maintain the order. If I use MediaSource to create playlists and download it, is the order maintained? Thanks, Scott

  • I do not have tool bar. How do I get them?

    My top screen is blank. No tool bars or nothing is written or shown on my top page

  • Sign in Page on startup HP stream 7

    Hi I mis-spelled my e-mail address on the start up page on my HP stream 7 and could not return to correct it. It doesn't seem to have affected use of the tablet but how can I correct the error in case of later problems? This question was solved. View