Yoga 2 Pro - trackpad does not disable in tablet mode
How do i set the trackpad to disable in table mode? I cannot use it as a tablet as the trackpad is still active.
Solved my own problem: Reinstall of Touchpad drivers fixed this.
Similar Messages
-
Yoga 2 Pro sometimes does not recognize the touchpad
My Yoga 2 Pro (running WIndows 8.1) occasionally stops recognizing the trackpad. I have NOT disabled it with the F6 key. It usually comes back if I put it to sleep and wake it up or restart it, but sometimes I have to do this several times. The touchscreen and keyboard are unaffected. Changing it from laptop to tent to tablet mode and back do not have an effect. I can plug in a USB mouse and it works, but it does not bring back trackpad functionality. I've tried re-installing the driver, but that doesn't have any effect either. I have no idea why this keeps happening.
Try installing the generic driver. Look at my sig for a link called yoga patch details. It explains how to install the generic driver.
-
Yoga 2 Pro: Touchpad doesn't disable in Tablet or Stand
When I flip to tablet or stand mode (i even get the toast notification that it's switched), the touchpad doesn't disable. I am still able to move the pointer and click. The keyboard however is disabled.
I have installed the bios update, energy manager thing, and latest firmware from Synpatics.
Anyone else have this issue?
Solved!
Go to Solution.indest wrote:
Cleo_Lenovo wrote:
Just would like to share my view here. Customers are always advised to use Lenovo's drivers because they have been re-packaged to fit to Lenovo machines.
At times, the Lenovo driver comes with serious bugs that never gets fixed. The trackpad and wifi driver are perfect example of such drivers. Do you know how sad it is that I am using a DELL trackpad driver on my Yoga?
Trackpad issue: http://forums.lenovo.com/t5/Idea-Windows-based-Tablets-and/Yoga-2-Pro-TouchPad-Deselects-Selection-I...
Wifi issue: http://forums.lenovo.com/t5/Idea-Windows-based-Tablets-and/Re-Yoga-2-Pro-Wifi-Problems/td-p/1452437 (84 pages -.-)
Hi indest,
I understand you and the users frustration. I agree that sometimes things just do not work as they should. Anyway, thanks for bringing up the issues. I'll need to check into the trackpad thread before escalate this case in full to engineering.
In regard to the WiFi issue, we had escalated this case much earlier but due to this model comes with different wifi card as well as situation changes based on different routers used, it was very difficult for the enginering team to pin point out the real root case. I'm sorry that it haas been dragged this long. But based on the information I have currently, our engineering team is testing on a beta driver provided by Intel and we're also trying to get affected machines as a sample for our further analysis. I'll need to catch up with a few folks in regard to this issue.
Best regards,
Cleo
WW Social Media
T61, T410, x240, Z500, Flex 14
Important Note: If you need help, post your question in the forum, and include your system type, model number and OS. Do not post your serial number.
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"!
Follow @LenovoForums on Twitter!
How to send a private message? --> Check out this article.
English Community Deutsche Community Comunidad en Español Русскоязычное Сообщество -
Yoga 2 Pro - Keyboard lock not working in stand mode
Where can I find the Yoga Utilities suite (Yoga Transitions, Chef, etc.). I just isntalled fresh 8.1 Enterprise and turns out the D:\ partition didn't have the Yoga Utilities available, same on the support site (checked Yoga 13 as well). Pretty dumb, but I can't use the stand since the keyboard doesn't lock
Hi i have this problem did you find a solution other than lenovo transition because i downloaded that and it still doesnt work....
can you please help me if you have any ideas.
my keyboard does not lock or disable in stand mode and sometimes it stops working in laptop mode...
any help would be greaatly appreciated -
Yoga 13" - Touch Pad not disabled in tablet mode/F6 No longer works.
I have updated all of my drivers from the Lenovo Yoga 13" site. I read on here to pay special attention to the Synaptics driver, mine is 16.2.21.4 from Synaptics. When I flip in to tablet mode my mouse moves around when I touch it. Also the F6's "disable touchpad" doesnt work.
Its really annoying to not be able to use it as intended. Anyone have a fix for this?hi OmegaNine,
Sorry to hear what happened,
1. Can we Try this,
Go to Control Panel / Programs and features/ uninstall a program
Look for the Synaptics Software, Uninstall it there.
2. Go to Device Manager and look under "mice and game controllers" and make sure it does not say Synaptics there.
If it Does Uninstall it as well and put a check on the box if it asked "delete driver software"
If the system did not asked you for a restart, Restart the system Manually.
Open Device Manager again and open the category Sensor
like on this photo
http://www.codeproject.com/KB/system/wiisensor/wiisensor11.png
Uninstall everything under Sensors but DO NOT put a check on the delete driver Software.
Restart
Download and install this driver
Synaptics TouchPad Driver for 64-bit Windows
Restart after installation and Check if You still have the Issue.
Hope this helps
Cheers!!
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter! -
I just upgraded to the New OS on my Mac Book Pro and now my trackpad does not zoom in or out. I looked at system settings on trackpad and it is set, but does not work How do I get it started?
This is really unfortunate. I'm sorry that nothing works. I was going to mention holding down the power button and doing a force shutdown but you already did that. You might need to take it into the Apple store. I don't know if booting into safe mode would help. You would have to turn off the machine again, hit the start button and hold down the shift key after you hear the tone, but normally you would let go of the shift key when you see the apple logo and spining wheel. Maybe by holding down the shift key after you here the tone will cause the screen to come back on? The other option is to start up from the 'install disk' if your machine came with one. You would insert the disk, then shut down the computer, and hold down the C key right after hitting the start button.
Here's the link for the safeboot
http://support.apple.com/kb/HT1564?viewlocale=nl_nl -
Trackpad does not scroll on Macbook pro with ios10.9.5
On a new MacBook pro 3GHz Core i7 the built in trackpad does not scroll with the finger movement in any of the applications.
I have to use the scroll bar on the side. The OS is iOS 10.9.5.
Any suggestions?
Thank you.Hi,
all the boxes are checked.
The 2-finger zoom and intelli-zoom work, so does the turning.
However the scrolling does not.
Any other tips?
Thanks,
H -
I have a new movie rental in my iTunes account on my Mac Book Pro but does not show up on Apple TV. All my other purchased movies are in there OK. Any suggestions?
It won't show up on your Apple TV until it is fully downloaded into iTunes on your computer, have you done this.
-
Hello I have a problem with Mac Pro, iPhoto does not want to stay open and close as I can figure this out? thanks
Refer below link once
App doesn’t open | Progress wheel spins continually -
What are the different ways to back up your photos from iphoto using a MacBook Pro which does not have a disk drive?
Note - that no internet backup service has been proven to be safe and effective for backing up the iPhoto library - unless you personally have backup uyp an iPhoto library and restored it sucussfuly form one it should not be recommended - a large number of people have lost their photos trying it
LN -
I Have a Macbook Pro that does not have a disk drive. How do I install the Adobe Photoshop Elements 11 that came with the Epson scanner I purchased. I registered the S/N and I can't find the Free download anywhere only trials.
Downloads available:
Suites and Programs: CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4 | CS3
Acrobat: XI, X | 9,8 | 9 standard
Premiere Elements: 13 | 12 | 11, 10 | 9, 8, 7
Photoshop Elements: 13 |12 | 11, 10 | 9,8,7
Lightroom: 5.7.1| 5 | 4 | 3
Captivate: 8 | 7 | 6 | 5
Contribute: CS5 | CS4, CS3
Download and installation help for Adobe links
Download and installation help for Prodesigntools links are listed on most linked pages. They are critical; especially steps 1, 2 and 3. If you click a link that does not have those steps listed, open a second window using the Lightroom 3 link to see those 'Important Instructions'. -
Premiere Pro CS6 does not recognize the USB PnP Sound device in order to produce a commentary sound track. The USB device has been activated on the iMac OSX by using the Audio-MIDI-setup and is working correctly with the iMac. When opening > presets >audio hardware I can only select between >standard >out integrated > digital input integrated >microphone integrated. USB PnP is not indicated at this place.
With the built-in microphone of the iMac I can produce the commentary sound track, but I would prefer a stand alone version for better quality.
Your help is highly appreciated. Thanks in advance, Annemarie!I'm using a Logitech Webcam Pro 9000 (which has a microphone on the side). I have several other devices plugged into separate USB slots: a keyboard, a mouse, my iPhone, and a Roland keyboard midi controller.
I've considered that maybe the webcam/mic combo is the culprit. If USB doesn't work at a constant speed, that could very well be causing the issue! The sound begins to lag badly sometimes when it's working properly, so that there's a multisecond delay between speaking and hearing my voice repeated back over the mic which is another sign that something is wrong. I've also caught it making a strange electronic sound during its "hang" time once it stops taking sound input correctly.
Maybe I should try to use line-in and forgo USB altogether then. I think I'd need a preamp and some sort of converter for that since the Mac Mini lacks a powered mic jack. I'm only a newbie musician so I've never set up such a system but it might be a better solution in the long run.
I'll check to see if it hangs before or after my computer enters suspend mode, that's a good suggestion too. Thank you for your help! -
Premiere Pro CC does not open MOD files correctly
Hi,
I just started using the Adobe Creative Cloud as a trial, in particular the Premiere Pro CC software, since it might be relevant, I am working on a mac (completely updated as of yesterday).
I have a JVC GZ-MG505 camcorder. This device saves the video files on an internal HDD in a file format called MOD. From what I have been able to see when searching on the web, this should be nothing more than a MPEG-2 file.
So, I tried importing some video files into Premiere Pro and to my surprise, I noticed that a whole strip on the right hand side of the image is missing. The original is recorded in a widescreen (16:9) format with 720x576 pixels and Premiere Pro gives me a file with 540x576 pixels. I have tried using the Interpret Footage to change this, but it doesn't let me change the number of pixels. I also tried opening the files in Adobe Media Encoder and I have exactly the same results as in Premiere Pro. However, opening the files in VLC or mPlayer they come out exactly as expected with all the pixels there. Has anyone come accross this problem before or can anyone help me with solving this?
I could try reencoding the files with VLC, but the output file is much smaller than the input file, so I am afraid I am loosing some definition.
So, just to restate my problem, the adobe products open my MOD files without complaining, but for some reason they loose a strip 180 pixels wide on the right hand side of the image.
CheersPremiere Pro CC does not open MOD files correctly
That is correct: there is a bug in CC. In CS6 they work correctly.
Please file a bug report.
http://www.adobe.com/cfusion/mmform/index.cfm?name=wishform
http://forums.adobe.com/message/5658455#5658455
search for mod files and you will find one or two other threads. -
Dvd burned in premiere pro cc does not fill the screen. Desire a 4:3 aspect ratio
I am using premiere pro cc. I burned a dvd several times,trying different presets. On each occasion the dvd never fills the screen. It does not lool like letterbox ( 16 x 9 ). There is space all around the picture / video. Need assistance fast,project is already late.Thanks in advance.
Theo SmithI sent the screenshot via an e-mail attachment. I wasn't aware that
attachments could not be forwarded this way. I will send it again. First time
I've utilized this service.
In a message dated 3/8/2015 10:15:23 A.M. Eastern Daylight Time,
[email protected] writes:
Dvd burned in premiere pro cc does not fill the screen. Desire a 4:3
aspect ratio
created by Peru Bob (https://forums.adobe.com/people/Peru+Bob) in Adobe
Media Encoder (AME) - View the full discussion
(https://forums.adobe.com/message/7264779#7264779) -
I have a Serial Number which worked fine on my MacBook Pro but does not work on my desktop PC (Win 7). What is the problem?
You haven't identified the version so I can't tell if offering you contact options for Adobe Support will be of use to you. But they will likely be your only hope of getting resolution unless you just happen to be using the wrong number as the serial number.
For the link below click the Still Need Help? option in the blue area at the bottom and choose the chat option...
Serial number and activation chat support (non-CC)
http://helpx.adobe.com/x-productkb/global/service1.html ( http://adobe.ly/1aYjbSC )
Phone support | Orders, returns exchanges
http://helpx.adobe.com/x-productkb/global/phone-support-orders.html
Maybe you are looking for
-
Dear all, This is my scenario: 1. downpayment is made to the vendor or by the customer Rs. 500 2. invoice is generated for Rs. 2500 3. Partial payment is made for Rs. 1000 my client wants 1. in vendor balance, it should show in the following way: ven
-
Hello all, I'm scratching my head here. My Itunes crahes as soon as it connect to the store. If I disable the internet accses, all works. has anyone else run into it?
-
Assign task with use a document variable
Hi, if i'm assigning a pdf document in assign task operation with use a document variable instead of application asset, I see the same old blank form after user submits the form. what ever typed in the form is not seen in the output variable assign
-
this is the code i put in onClipEvent (keyDown) { if(Key.isDown(Key.RIGHT)) { this._x=+x; if(Key.isDown(Key.LEFT)) { this._x=-x; if(Key.isDown(Key.UP)) { this._y=-y; if(Key.isDown(Key.DOWN)) { this._y=+y;
-
Maintaining Plant info in CRM Ship to Party
Hi Experts, CRM is the source system for creating ship to parties in CRM and replicating to ECC. However, in ECC the field 'Delivery Plant' is marked as mandatory due to which the sales area data of Ship to party is not flowing to ECC. How do I fill