Yoga 2 touchpad does not disable when in tablet mode(after updating to 17.0.19) please help !!

i have yoga 2 pro 13
had the latest driver for the touchpad installed from the lenovo website but allwyas had problems with the tow finger scrooling...
so i updated it toe the last virsion of the Synaptics site - the 17.0.19 17Oct13 ver
now everything works perfect but the only thing that it does never disaple automaticaly and not even manually in tablet mode so when i use it in tablet mode happens lots of times that im touching the trackpad from behind and it makes a mass !!!!!
please help me
is there any sloution ??
i don't want to go back to the lenovo driver becouse that one having scrolling with tow fingers all the time
help !!

with that driver i allways had scrolling problems with tow fingers... instead of scrolling it change the zoom screen all the time
and i sow it's known problems so i had to install the Synaptics driver....
how can i resolve this??

Similar Messages

How come my external hard drive is no longer visible in finder even after ticking it in preferences? it shows in the disk utilities but does not allow me to find a problem or fix the problem? Please help.

it shows in the disk utilities but does not allow me to find a problem or fix the problem? Please help. also my external hard drive is a seagate free agent go, 500GB. it is visible on my tv but has no files in it… i'm scared i've lost everything?

Honestly i cannot remember sorry, i got it like 5 maybe 6 yrs ago and just started downloading things to it as the memory on the computer started filling up and when i wanted to see photos/videos on my TV.
My wife did tell me after i had written this post that she did try and record TV to it as it was plugged in. I think by doing so somehow has deleted everything. It reads on my TV yet has no files in it but won't show up on my computer. hope this helps.
Starting to think it is going to cost more to retrieve files on it than it will be to buy a newer and larger one.

I have my Calendar app syncing with iCloud. Every time I open it it says, "Moving Calendars to Server Account..." It runs and runs and does not stop. As a result, I cannot access my calendars. Please help.

I have my Calendar app syncing with iCloud. Every time I open it it says, "Moving Calendars to Server Account..." It runs and runs and does not stop. As a result, I cannot access my calendars. Please help.

I have the same problem, I tried the solution of Dr Cox but that didn't work as he said go to system preference then mail, contacts etc. but I don't have that. Can someone help?
Elaine

Getting Error "Apple ID does not have permission to access iTunes Connect" while logging to iTunes. Please help me in this regard

Getting Error "Apple ID does not have permission to access iTunes Connect" while logging to iTunes. Please help me in this regard
Regards,
Amar

See the "More Like This" section over there ===============>
In the future, search before posting.

I have update my 3g software to 4.21 but its not working when it come to restoring firmware its show a error please help me out

i have update my 3g software to 4.21 but its not working when it come to restoring firmware its show a error please help me out

That error shows up when a phone is jailbroken or you are trying to downgrade the iOS version. Neither of which is supported by apple.

HT4623 my phone does not show up in my computer after update

my phone does not show up in my computer after update

Hey there, i got the same Problem with my MacBook Pro (Mavericks 10.9.4) and two iPhone´s 5 with the iPad 2 and the iPad Air, (all with iOS 7.1.2) since 2months. SOLUTION???
Since the change of Snow Leopard on Mavericks, the entire system of the MacBook is much slower. This is already noticeable at the beginning (start the MacBook Pro). It runs through the entire software. z.Bsp. Open Safari / Outlook, iTunes and more. for about 2months absolutely no back-up of my devices is possible!!
Every time when you connect the hardware (iPhone 5 / iPad 2 / iPad Air) iTunes stops responding and needs to close above EXIT NOW!! No back-up's my hardware (see above) possible!!!
but iPhoto is running with the devices and at least I can transfer the images.

I could not take picture at video mode after updating the software to IOS 7

I have iPad 3 and update the software to IOS 7 recently,after updating of software I could not take picture in videos mode and I could take only photos.please advise how to resolve this issue.

Swipe up or down to select options.
You can do it in the middle of the screen.

Yoga 2 Pro - Black screen when on tablet mode

Hi,
2 weeks Yoya 2 pro out of the box, and get a black screen when reaching the tablet mode (back of the lid touching the back of the laptop base).
I try hanged the setting under power management, with no success. When reaching the tablet mode, I get the same result as closing the lid in laptop mode.
I connect my Yoga 2 to a TV through the HDMI and can see the screen and interact with the black screen (not easy to touch the right spot).
My bios is updated and I have Windows 8.1.
Any suggestion???

I found the answer to my problem at
http://forums.lenovo.com/t5/Idea-Windows-based-Tablets-and/Yoga-2-Bios-Update-Crash/m-p/1322487/high...
Now that I found that post I do recall the instructions telling me to turn it off manually when I updated the bios earlier this year. However, the current instructions do not mention it at all, perhaps they should be updated?

Outlook 2010 -Mailbox Cleanup wizard does not start when using cached mode

We are using Outlook 2010 with Exchange 2003 server.
Currently all users are using online mode, but for some problem, I need to persuade the users to change to use cached mode.
Recently we find that when user
mailbox reaches its size limit and try to send an email message in Outlook 2010 that is in cached mode, the email message stays in the
Outbox and the Mailbox Cleanup wizard does not start. It just prompts
for "send and receive error". As most of the user would not look for what the error is referring and just call IT to fix. Even worst is, they didn't realize that the mail is still in outbox.
I find the KB2544027 describing this issue but was not available and suggest to install 2596485.
http://support.microsoft.com/kb/2544027/en-us
I've try to install the hotfix and install Office 2010 SP2 but just doesn't work.
Does anyone know how can I fix it?
Thanks!

Hi,
Based on my research from the internal resource, this issue has been fixed in build 14.0.6126.5000 or less. I suppose that the hotfix not available because it has been involved in the release.
I’d like to confirm your Office 2010 build number so that we can conduct a deeper analysis on this issue.
In addition, make sure you have installed the latest update for Office 2010.
Best Regards,
Steve Fan
TechNet Community Support

Adobe Captivate does not start when trying to install after download.

Downloaded Adobe Captivate 7 but when trying to install it does not do anything.

Hi dimitri2014,
The downloaded Captivate files has 2 parts - One with .7z extension and the other with .exe extension.
Please run the .exe file to initiate the installation.
Alternatively can try re-downloading both the files from the direct download links available at : http://prodesigntools.com/adobe-captivate-7-free-trial-direct-download -links.html
Please make sure you follow the important steps mentioned on the page before initiating the download.

Graph does not autoscale when it's value is updated in a subvi and Defer Panel Updates is on

Hello,
I have a main VI containing several xy grpahs, which I update from a sub vi. In order to cut down on front panel redraws I defer panel updates while the graph values are updated and then redraw the FP after this has been done. However when I do this the graphs do not autoscale properly. I've attached two vi's as an example. Run the Main vi, if the Defer Panel Updates boolean is false then everything works fine, if it is true then the graph does not autoscale.
I have found a previous post that mentions something similar (here). Has this been fixed or is there a work around.
I'm using LV 8.5
Thanks
David
Attachments:
Main3.vi ‏22 KB
Sub1.vi ‏14 KB

Hi Matthew,
Thanks for your reply, it fixed the problem. However it has thrown up a different but related issue.
In my application the user can select how many graphs to display and I
programmatically calculate the size and position of each graph. If any
of the graphs overlap, even slightly, and defer panel updates is on
then only the topmost graph autoscales correctly, the others don't at
all, although the data they display gets updated. Turning autoscale off
and on again for a particular graph rescales that graph, presumably
because it has been forced to.
I have attached a test case with 4 graphs. The size and position of the
graphs are set by the 'Offsets' cluster. Click 'Rearrange' to get it to
recalcute the positions. If you change the Vertical Gap or Horizontal
Gap values to 0 or negative then the graphs will overlap. With Defer
Panel Updates off there is no problem. With it on only the topmost
graph updates properly.
My current workaround is to ensure the graphs don't overlap, but I'm guessing they shouldn't be doing this anyway.
David
Attachments:
PositionsCalculator.vi ‏19 KB
Main21.vi ‏50 KB
Plot.vi ‏22 KB

Phone does not ring when in sleep mode

I have noticed that if I attempt to make a call to my phone when it is 'asleep', i.e. a few minutes after it auto locks, then it does not ring. When I 'activate' it by pressing the home button I see those calls appearing as missed calls. Any idea why this happens?

This is the exact problem i'm having right now, I don't know why it's happening, but when i have it on the desk and when it's in sleep mode, I can get phonecalls and it won't ring but it won't show up as missed calls either, if i get a voice message i'll get it if i take it out of sleep mode and let it sit with full reception for a minute.
I also lose all reception while in sleep mode.

Z10 does not want to charge with AC after update

Hi, please can anyone help. After the newest software update (Im now on 10.2.0.424 ) my Z10 does not charge if plugged into an wall socket. I can only charge via my pc or laptop. This is very annoying as I charge my phone at night time. How do I fix this......
Thank you
Louise
PS : How do I get into the battery settings ?

It may have something to do with the update and it could also be the night time charging (not really recommended)
Try a reset: When powered on hold down the power button for 10 seconds.
If it does not help post back, someone else may have another solution.
Also consider the below if you do not find a solution.
You can restore your phone to factory settings if you wish to see if it corrects your issue. Resetting to factory settings will wipe out all your data so you should save it first. To save all your stuff download and install BlackBerry Link on your computer from the link below. Resetting will not back-up the OS on your phone. Once you have downloaded and installed BlackBerry Link connect your phone to your computer and save your stuff. Once saved disconnect your phone from the computer.
To reset your phone: tap the Settings App, scroll down and tap Security and Privacy, tap Security Wipe, tap the blank box and enter blackberry.
Once Wiped reconnect your phone to your computer and install your stuff.
http://us.blackberry.com/software/desktop/blackberry-link.html
http://ca.blackberry.com/software/desktop/blackberry-link.html

How do I change my apple id from an old one that does not exist anymore to the new one I use....Please help me I can't update any downloads for my apps.

How do I change my apple ID from an old one that doesnot exist anymore to a new old? When I purchased my macbook I had a mac.com email address but now have a me.com one. My computer is linked to the mac one. I cant update my apps....some one please help.

Well when I first purchased I had an mac address, which I have not used for a long time I started a me address about 18months ago. and up untill I updated my iPhone I have been able to use my mac.com now I cant and dont know what to do because it tells me to verify my apple ID. I put in the password etc and doesnot take me anywhere as I cant access the emails.

Can not get Firefox to remember a new password. Deleted old one for Password Manager, however it does not ask to save new password. Can't find a solution, please help!

I changed my password for a website, and Password Manager kept putting in my old password. Deleted the password from Manger, however Firefox does not ask me for a new one at all. Checked the help desk, but the solutions are not working either. Restarted computer, nothing. What do I need to do from here?

Hey lydiac,
You could try going to ''Tools > Options > Privacy'' and removing the individual cookie for that site. You can also try going to ''Tools > Options > Security'' and verifying that the site isn't in your exceptions list.
Hopefully this helps!

Yoga 2 touchpad does not disable when in tablet mode(after updating to 17.0.19) please help !!

Similar Messages

Maybe you are looking for