Yoga 2 wifi not working after update to Windows 10
Hi all, I just updated my brand new Lenovo Yoga 2 (13") from Windows 8.1 to Windows 10. But after doing so, I cannot establish any WiFI/W-LAN-connection! If I go to the settings for network adapters in the system settings, I even caanot find the wireless LAN adapter as if it was not installed at all! Can anyone help me? Is there any source for new drivers or something else to fix this?Thanks a lot and best regards from GermanyJohannes
We had the same problem of wi-fi not appearing at all in network connections, with a newly bought Lenovo Yoga 2 13 with Realtek wireless just upgraded to Windows 10, and after a lot of tinkering managed to get it working. We did three things at the same time, which between them fixed it:1. Installed the Intel Chipset drivers for Windows 10 (from Lenovo's support site)2. Did a HARD/FULL SHUTDOWN (hold SHIFT when clicking shutdown), bypassing Windows fast hybrid shutdown.3. Accessed the BIOS, turned Wi-Fi setting in the BIOS off and on and saved settings (there's a button on the side to access the BIOS) I suspect the combination of 1 and 2 fixed it (with the FULL shutdown being key!), because I can't see just accessing the BIOS doing much, but thought I would list all 3 just in case! Sorry for not being more specific, but I hope this helps someone!
Similar Messages
-
Yoga 2 Pro wifi not working after update to Windows 10
Hi all, I just updated my brand new Lenovo Yoga 2 (13") from Windows 8.1 to Windows 10. But after doing so, I cannot establish any WiFI/W-LAN-connection! If I go to the settings for network adapters in the system settings, I even caanot find the wireless LAN adapter as if it was not installed at all! Can anyone help me? Is there any source for new drivers or something else to fix this?Thanks a lot and best regards from GermanyJohannes
We had the same problem of wi-fi not appearing at all in network connections, with a newly bought Lenovo Yoga 2 13 with Realtek wireless just upgraded to Windows 10, and after a lot of tinkering managed to get it working. We did three things at the same time, which between them fixed it:1. Installed the Intel Chipset drivers for Windows 10 (from Lenovo's support site)2. Did a HARD/FULL SHUTDOWN (hold SHIFT when clicking shutdown), bypassing Windows fast hybrid shutdown.3. Accessed the BIOS, turned Wi-Fi setting in the BIOS off and on and saved settings (there's a button on the side to access the BIOS) I suspect the combination of 1 and 2 fixed it (with the FULL shutdown being key!), because I can't see just accessing the BIOS doing much, but thought I would list all 3 just in case! Sorry for not being more specific, but I hope this helps someone!
-
F5 is not working after update of windows 8.
f5 is not working after update of windows 8 in my laptop. Rest of the function keys are working.
my laptop details are
Product Name: HP Pavilion 15-e008tu Notebook PCHello prem23,
What did the F5 key do before? According to your manual in the Action Keys list (page 32-33), that key wasn't tied to anything unless its just for page refresh.
If a Windows update breaks something, the best way I know to correct the problem is to uninstall that update.
OR
You can revert Windows back to an earlier state before the update with a Restore Point provided you didn't turn off that feature. If for some reason it is turned off, you will not be able to revert to that point as one was not created.
After the restore, only install one windows update at a time until you find the culprit and uninstall it. This way you have the other updates installed. YES this can be a long process.
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c03327545&cc=us&dlc=en&lc=en -
Touchscreen is not working after updates on Windows
Hi
My touchscreen stopped working after the Windows updates on my laptop froze. I have went through all the settings of the pen and touch and others to resolve this problem and unfortunately it is still not working. I have also rebooted the laptop to factory settings as well as updating all the things which needed to updated and updated softwares from the HP website recommended and I have updated the BIOS but still the touchscreen is not functioning.
I hope you can help.
Thank You
This question was solved.
View Solution.According to the message you have recently posted I would like to confirm that this could be a hardware issue and I strongly recommend you to immediately Contact HP Technical Support over the Phone for further assistance without any delay to get your Notebook diagnosed and serviced by an authorized HP Certified Engineer
You can also Check your warranty Here to verify the warranty status
Hope this helps, for any further queries reply to the post and feel free to join us again
**Click the KUDOS star on left to say Thanks**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.
Thank You,
K N R K
Although I am an HP employee, I am speaking for myself and not for HP -
Internet switch not working after update to Windows 10 64bit
Today i updated my Windows 7 laptop to the Windows 10 Home 64bit OS. Everything seems to work fine, except the WIFI. Windows does find my adapter, but won't wake it up. My built-in wifi button (f12) has got a red light on it, even when I pressed it. I tried the Windows 8 wireless button driver, but i didn't solve my problem. With that driver installed the button switches between airplanemode on/off. Not between WIFI. Also in the WIFi settings wifi turn off. When I try to switch it on, it directly turns back to "off". Wired internet works flawless. I gues it's an driver issue, so i was wondering if there is an driver upcomming? Or is there another solution to switch it on.Please help me. It's very annoying.
I read soms other forums and i came tot an solution:
1. Instal Windows 8 wireless button driver
2. Preform a hard reset
3. Reboot system
4. Boot tot BIOS, load the defaults
5. The wifi buttons works. -
Z10 wifi not working after update
i have just updated my OS to 10.2.1.2941 on STL100-1
after few days i am not able to connect wifi. if i turn of mobile network then wifi works fine otherwise i will not work.
please help me.Hi kashifrompak,
Welcome to the Support Communities!
The following article will provide some troubleshooting steps for this issue:
iOS: Wi-Fi settings grayed out or dim
http://support.apple.com/kb/ts1559
I hope this information helps ....
Have a great day!
- Judy -
Internet browsers do not work after updating to Windows 8.1.
I have spent several hours researching my issue, performing fixes that have worked for others, but to no avail. I have talked with 3rd party tech supports, in addition to Microsoft tech support. I also recently spent 3 hours under remote access with a helpdesk
employee. To no avail.
My issue:
Recently updated to Windows 8.1. Immediately following, none of my browsers work. Internet Explorer is entirely out of commission. Firefox and Chrome, however, interestingly, are able to open simple google pages: gmail, google maps, google search - I can
even search things that I want and results will show up... they just will not load if I click on them. The error message when I click on "More" says something along the lines of "maybe it's your firewall or antivirus wrongly detecting Chrome...",
and I think maybe something similar for Firefox. Explorer simply says that it cannot display the page.
So, how am I writing this? I am currently booted up in Safe Mode, with networking. Apparently it works here, which I'm hoping indicates that the issue to resolvable.
Remedies I have attempted:
I have restarted my computer over 60 times in the past 2 days.
I have troubleshooted the internet connection via the button that says "troubleshoot". It says it cannot identify the problem.
I have executed various command prompts executed as administrator: i.e. netsh winsock refresh, advfirewall refresh, something to do with ipv4, ipv6, a bunch of "IP stack resets", etc, etc.
I have manually added chrome, firefox, and explorer to my firewall exceptions, both via McAfee and via the Windows firewall system. Both simultaneously, one at a time, etc, every combination of this.
I have uninstalled the web browsers and reinstalled them.
I have unintalled my antivirus and reinstalled it, and checked in between.
I have turned my firewall off.
I have manually inputted some kind of DNS address (8.8.8.8 and 8.8.4.4) and/or IP address (forget exactly what was asked of me to input).
I have gone to my "Manage Devices" and updated all of my network drivers, and attempted to revert to old versions of drivers.
There are probably more things that I have tried, I just don't remember exactly and cannot list them. Most things you can find on Google pertaining to this issue, I've tried.
Is there anything at all that anyone can think of to fix this situation? I am about ready to refresh my computer/do a systems restore/whatever to erase everything, factory reset, even (hopefully it works, because I've read that some people have issue, i.e.
no previous partition found or something, or no recovery media present, etc, etc).
Before I resign to this, PLEASE FOR THE LOVE OF GOD HELP ME.
Also, may I please note here that given the sheer frequency of this issue around the web that I've found, I think it is absolutely ridiculous and irresponsible of Microsoft not to rectify the issue. This is even 3+ months following the release of the
update; I always lag on updating such that bugs like these are fixed before I get on the train. This update has essentially reduced my multi-hundred dollar computer to an infantile calculator/solitaire/checkers/Microsoft office LCD screen. Not to mention wasted
2 full days of my time.
Sorry, just saw red there at the end and had to vent my anger. Please help.Hi,
I can imagine the inconvenience you have experienced. I will try to help you in fixing the issue.
Please test this issue in the Clean Boot environment to check if there is some conflicts with network.
If the issue disappears in the Clean Boot environment, we can use a 50/50 approach to quickly narrow down which entry is causing the issue.
How to perform a clean boot to troubleshoot a problem in Windows 8, Windows 7, or Windows Vista
http://support.microsoft.com/kb/929135
Also, to find where your problem is, I suggest you use Network Monitor tool to capture a network package:
http://www.microsoft.com/en-in/download/details.aspx?id=4865
Then, please upload the package here for further research.
Note: I highly recommend you use SkyDrive to upload collected files and to post screen shots/pictures. Although you might not be used to it, SkyDrive features a lot of free advanced functionality around file storage capacity, sharing, privacy, and collaboration:
http://skydrive.com
Regards,
Kelvin hsu
TechNet Community Support -
Powerdvd 12 not working after update to windows 8.1
My notebook came loaded with windows 8 and powerdvd 12 to drive the DVD drive. After I accepted an update of windows 8 to 8.1, powerdvd 12 would no longer run. I have restored the system back to factory setting and have been told that the Hp support site has a free upgrade for powerdvd that makes it compable with 8.1. I can't find any free update can anyone point me in the right direction? Or have I been given duff info?
This question was solved.
View Solution.Hi,
Try the version on the following link.
http://ftp.hp.com/pub/softpaq/sp69001-69500/sp69404.exe
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience -
Iconia Tab 8 W Touch not working after update to Windows 10
So, I have an Iconia Tab 8 W which came with Windows 8.1. I updated to Windows 10 but there seems to be some issue with the default graphic card driver since the touch doesn't work (works during the installation process so it's not a hardware problem). I managed to plug it into a powered USB hub and get a classic mouse-keyboard setup working but the touch is still dead. I found drivers on the ACER website but not only do they not have any sort of "setup" or "install" file, the Graphic Card doesn't show at all on the device manager. So, the "update driver" option is not an option. I've tried reverting to Windows 8.1 but the place where this option should be doesn't show it. I can only clean up the PC or boot into safe mode. Tried both, none works. As a last resort, I downloaded the Windows 8.1 media creation tool and booted into it to reinstall Windows 8.1 but now it asks me for the Windows key which is no where to be found. Anybody got any ideas?
IIRC the touch driver and te graphics driver are two quite different things. The touchscreen digitizer looks to the system like a USB device, so a problem would show up in Device Manager either as a USB problem or a HID problem. Try W10 again but this time look into the different secions of DM for the issue.
-
Audio not working after Updating to Windows 10
I have seen a solution for Windows 8, I have just updated to Windows 10 (from Windows 7), should I try the samething?I have tried different things but if I put ear buds in I have sound but no sound from laptop speakers.
hi Nitish,
Welcome to the Forums.
Just to check, are you using Windows 10 Insider Preview (x64) - Build 10162 which is the latest as of this writing?
I don't have a G400s unit here for testing but can you try the following:
1. Check if the audio works fine when using a headphone / external speaker
2. Run Windows Updates to get the latest patch and bug fixes for the OS.
3. Apply the "workaround" fix as discussed in this microsoft article (the fix requires you to limit the "Maximum memory" to 3072 under MSConfig > Boot > Advanced Options ).
Regards -
Wifi not working after updating iOS 8.2 on I phone
been facing since updated new ios 8.2 wifi connected but unable to use Internet when I disconnect wifi and connect again so it works for very
short time please help me I have tried everything resetting network resetting I phone off locatin service renew licence but not workingGood Afternoon Smsf,
It sounds like you may have tried some, but not all of the steps for troubleshooting your Wi-Fi connection with the iPhone. I'm curious to know if the issue is happening just in one location (home or work), or if you've tried to get on the internet from a different wireless network.
Give these steps a try in the order given, and let us know if the issue persists.
If your iPhone, iPad, or iPod touch won’t connect to a Wi-Fi network - Apple Support
https://support.apple.com/en-us/HT204051
Regards,
- Judy -
Ipod touch 5g wifi not working after update
I recently did the update for ipod touch 5g, and now i cannot connect to any wifi network. I know the internet and connection is available as my phone and computer connect to my wifi just fine. How can i get my ipod to work on wifi again?
If not this:
iOS: Wi-Fi or Bluetooth settings grayed out or dim
One user reported that placing the iPod in the freezer fixed the problem. A trick that works frequently with iPhones:
Settings > AirPlane Mode ON, Do Not Disturb ON
Power down and wait 5-10 minutes
Power up
Settings > AirPlane Mode OFF, Do Not Disturb OFF
If not successful, an appointment at the Genius Bar of an Apple store is usually in order.
Apple Retail Store - Genius Bar
Then
Does the iOS device connect to other networks?
Does the iOS device see the network?
Any error messages?
Do other devices now connect?
Did the iOS device connect before?
Try the following to rule out a software problem:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Power off and then back on your router
.- Reset network settings: Settings>General>Reset>Reset Network Settings
- iOS: Troubleshooting Wi-Fi networks and connections
- Wi-Fi: Unable to connect to an 802.11n Wi-Fi network
- iOS: Recommended settings for Wi-Fi routers and access points
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar -
Blu-ray does not work after update to windows 7
Hi, couple months ago I have installed windows 7 on my HP Pavilion dv5-1070ew (previously there was pre-installed Vista). I've installed the newest version of HP MediaSmart DVD (4.0.3822) downloaded right from HP.com but unfotunately, when I'm inserting a BLU-RAY Disc it's not being played. HP MediaSmart DVD opens and it writes that "Disc is ready to play" (so it is able to see the disc), but when I click button "Play", the monitor starts to wink for a while and then nothing happens...
Thanks in advance for any help
This question was solved.
View Solution.I would suggest downloading trial version of cyberlink power DVD from here http://www.cyberlink.com/downloads/trials/powerdvd/download_en_US.html?affid=2581_853_290_12410_0_EN... and check if we till have the same issue.
But before doing that, I hope after the change of OS, you have installed all the required drivers like chipset, graphic, etc....
Although I am an HP employee, I am speaking for myself and not for HP.
Make it easier for other people to find solutions, by marking my answer with 'Accept as Solution', if it solves your problem.
Click on the BLUE KUDOS button on the left to say "Thanks" -
WiFi not working after update to ios 5.0.1
Original iPad - after restore and set up as new iPad with 5.0 setting bar on left side of screen say "No wifi". Wifi router is fine, all other devices are working, including 2 iPad2s. Have tried to restore and sync with iTunes twice with same results. Any way to reset?
Look at iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
Also try this - Turn Off your iPad. Then turn Off the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
Cheers, Tom -
WiFi iPhone 4S does not work after update iOS 6.0
WiFi iPhone 4S does not work after update iOS 6.0
This sounds more like a hardware issue.
Have you checked that the dock connector port is not dirty?
Maybe you are looking for
-
I was given an iphone 4s by my sister as she got a new one, now i want to clear it so that i can set it up with my own details, if i erase all content and settings will this affect anything on her new iphone as it is synced to the same gmail account
-
How do you require someone to digitally sign a form before hitting submit by e-mail.
-
Sync Outlook '11 with iPhone Calendar
I want to sync my iPhone events that on my iPhone 4 right now to the Calendar in Outlook 2011 on my Mac but I don't want to replace anything else... like remove any events off my iPhone. But can I also do this wirelessly through cloud or something so
-
Invoke wmi method to send remote command
Hi guys, i am trying to create a log entry by using inoke-wmimethod not invoke-command this is what i am using but no luck foreach($server in $servers){ $error.Clear() $ping = New-Object System.Net.NetworkInformation.Ping if($ping.send($server,1000).
-
10g ODM access from jDev 9x?
I'm wondering if DM4J 9.0.4 working in JDeveloper 9.0.4 is compatible with the 10g database ODM components? If not, how does one work with 10g ODM prior to the release of 10g client components? thanks.