Yoga 3 pro box opening problem

Dear All,
I just joined the lenovo world by buying a yoga 3 pro. Unfortunately, I am having an unusual problem. I plugged in the device and tried to turn it on. It did not work. There is no picture on the screen, and there is the light getting on and off in the keyboard backlit. In every, say, 3 to 4 seconds, I see backlit lights turning on and off. There is a very silent deep sound and I understand tht the device is working but nothing on the secreen. Just dark screen.
please let me know if such a problem has been experienced before? What may be the reason?
Thanks, Serden

Hi serden, and welcome to the Lenovo User Community!
Congratulations on choosing the Yoga 3 Pro, it's a fine machine.
What you're seeing is absolutely not normal. I would contact the vendor you bought it from, or your local Lenovo support, immediately.
I don't work for Lenovo. I'm a crazy volunteer!

Similar Messages

Acrobat 9 pro double opening problem, in PS and Acrobat ?

I've seen other posts about PS refusal to open an Acrobat 9 pro file, and tried the suggestions for sneaking the file in by copying via Reader, etc. This drastically reduces resolution, and I'm creating a file for publishing. I also tried sending the file to a professional designer, who is using the latest acrobat on her end, on an Apple. She can't open my file either.
PS gives me the message: "There was an error processing the document. The file may be damaged or corrupted.
My designer, using Acrobat, gets the message: File is damaged and cannot be repaired.
As many people have noted, this did not happen with Acrobat 7. How do you get past this? Can it be the upgrading to Acrobat 9 renders the other Adobe programs useless unless they're upgraded as well? I thought only Microsoft did that.

Hi,
Without more information I am only guessing, but I suspect it's an issue related to the version of PDF and the version of Photoshop you are using. Although we certainly don't specifically work to prevent people from using different versions of the software together, this can result from version mismatches. For example, if you are using Acrobat 7, then I am guessing you might be using Photoshop CS2. Acrobat 9 (and more importantly PDF 1.8) didn't exist then, and there is no way to predict what cool things might be added to future releases—like the Flash player.
The good news is that you can essentially back-save a PDF with Acrobat to fix this. Try this: Advanced: PDF Optimizer: and choose Make Compatible with Acrobat 7 and try it again. If that doesn't work for you, repost with the following details:
Version of Photoshop
Version of Acrobat you are using
Attach a file if you can
And I'll try to see what's happening.
Tim

AYUDA !! :( YOGA PRO 2 13" PROBLEMA CON RESOLUCION DE PANTALLA

hola a todos , tengo un problema que me afecta cada vez mas , y no se como solucionarlo. no me abre correctamente las ventanas , hay aplicaciones que abre una ventana muy pequeña , intento hacerla grande , pero no me permite , intento cambiar la resolucion y tampoco se soluciona . hay foros y paginas de internet que me convierte la vista de la pagina como si fuera un smartphone (mobile) , en vez de como ordenador limitandome mucho su uso . por favor necesito una ayuda lo antes posible muchas gracias de antemano

quizas no se aprecie en la foto , pero apenas se lee de lo pequeñisimo que es . con el explorercon chrome se ve a tamaño normal pero algunos foros se pone en vista de "MOBILE" y no se ve correctamente , aunque pincho continuamente "vista normal" se cambia y a los dos segundos se vuelve a poner en " vista MOBILE " .... es desesperante hay programas que abro y abre una ventana de 6 x 6 cm y no hay forma de cambiar el tamaño , he probado a cambiar resolucion , hacerlo con maquina virtual con w7 32 , etc.... pero nada

Acrobat Pro XI print dialog box opens in background, Web Browser

Issue: From web browser apps, I select Print > Adobe PDF > then, the Save PDF File As dialog box opens in the background instead of the foreground.
Acrobat Pro XI / Acrobat Pro 11.0.2
IE8 x32 / IE8 x64 / Firefox 20.0.1
Win7 Ent x64 SP1
Dell Latitude with I5 proc and Intel video
Dual screens with extended desktop display via DVI
In Distiller, I check the box for Preferences > Ask for PDF file destination.
I was issued a new corporate laptop a few months back, specs are above. Did not have this issue with Acrobat Pro X on my old Dell Latitude running Win7 Ent x64 SP1. So, I have multiple new moving parts in what could be the root cause.
Any ideas?
Thank you,
Doug

CowboyInAZ wrote:
"Acrobat is a fincky application..."
One thing I've learned since OSX 10.2 is that Mac is finicky about printer drivers too.
I had a Lexmark and it would freeze all the time after I switched to Panther. It was a discontinued model so when I moved up to 10.3 there were no new drivers. The old ones installed OK but they would cause it to freeze up and if it did print, it took about ten minutes to get through a page of text.
I got a new printer and one tht had current drivers available for Mac and the problem was solved.
It seems we fight a never-ending battle with hardware and software racing to stay ahead of each other.
Yes I've owned three printers since owning my first Mac an SE 30 I started out with a Apple ImagewriterII (made C-Itoch). I had to switch when I bought a 7100/66 which used the PowerPC processor instead of the 68030 processors. Then I had a HP DJ 650cse which used a Black Cartridge only. No color. I had to change again When I bought my G4-500. I am still using it today. Its the best printer I've had so far. I fear when I buy a new Intel Mac, and comes with X.6 (Snow Leopard) I will have to swap again. I've seen the new HP DeskJets and the won't last as long this one. They look like cheap toys and (gulp!) they use heads built like in epson not the Cartridges. The Cartridges were more expensive. But each time you bought one you got a new set of print heads. No longer.

When I start up the computer, the dialogue box opens and saying that the procedure entry point splite3_wal_checkpoint could not be located in the dynamic link library SQLite3.dll. I tried to fix this problem by redownloading itunes, but the problem still

When I start up the computer, the dialogue box opens and saying that the procedure entry point splite3_wal_checkpoint could not be located in the dynamic link library SQLite3.dll. I tried to fix this problem by redownloading itunes, but the problem still persists. How can I fix it? thank you.

With Windows Explorer, navigate to your C:\Program Files\Common Files\Apple\Apple Application Support folder.
Copy the SQLite3.dll that you should find there, navigate to the nearby Mobile Device Support folder, and Paste it in there also.
Reboot and see if all is well
In case that your OS is Windows 7 (64 bit)
1. Open windows explorer, go to location C:\Program Files (x86)\Common Files\Apple\Apple Application Support
2. Copy file "SQLite3.dll"
3. Open new windows explorer, to to location C:\Program Files (x86)\Common Files\Apple\Mobile Device Support
4. Paste file "SQLite3.dll" to the location.
5. Reboot your computer, it should not display that message, it should be clear.
Good Luck

When I start up the computer, the dialogue box opens and saying that the procedure entry point sqlite3_wal_checkpoint could not be located in the dynamic link library SQLite3.dll. I redownload itunes, but the problem still persists. How can I fix this?

When I start up the computer, the dialogue box opens and saying that the procedure entry point splite3_wal_checkpoint could not be located in the dynamic link library SQLite3.dll. I tried to fix this problem by redownloading itunes, but the problem still persists. How can I fix it? thank you.

With Windows Explorer, navigate to your C:\Program Files\Common Files\Apple\Apple Application Support folder.
Copy the SQLite3.dll that you should find there, navigate to the nearby Mobile Device Support folder, and Paste it in there also.
Reboot and see if all is well
In case that your OS is Windows 7 (64 bit)
1. Open windows explorer, go to location C:\Program Files (x86)\Common Files\Apple\Apple Application Support
2. Copy file "SQLite3.dll"
3. Open new windows explorer, to to location C:\Program Files (x86)\Common Files\Apple\Mobile Device Support
4. Paste file "SQLite3.dll" to the location.
5. Reboot your computer, it should not display that message, it should be clear.
Good Luck

Does not let me add text to my verizon website. This adding text feature works well on internet explorer. I can click on add text, the box opens up but I can not type in the box for some unknown reason. What can be done to correct this problem ...

does not let me add text to my verizon website. This adding text feature works well on internet explorer. I can click on add text, the box opens up but I can not type in the box for some unknown reason. What can be done to correct this problem ...

I didn't search before, but "you are not alone" (the thread [https://support.mozilla.com/en-US/questions/747424 In Verizon's Sitebuilder for webpages, I can not edit text boxes when using Firefox. I do not have this problem if I use Internet Explorer. Is there a setting I can change in Firefox to correct this problem?] has 18 votes for "I have this problem, too).
I can only guess about the reason... Firefox works with many websites' "rich text" editors, but ones that haven't been updated for five years may assume that Firefox is the old Netscape browser and use scripting techniques that don't work in Firefox.
If Verizon has a different "basic" or HTML editor that you can tolerate using, you could try that. It might not be subject to the same incompatibilities.
If I someday get a Verizon account, I will surely be looking into this further, but for now, it's hard to suggest anything else.

Hi guys i have an ipad 1 and when i plug it in to my macbook pro picasa opens up and show its name but when i open itunes i cant find the name, ive been working my head out to solve the problem please help me:(

hi guys i have an ipad 1 and when i plug it in to my macbook pro picasa opens up and show its name but when i open itunes i cant find the name, ive been working my head out to solve the problem please help me:(

Pay no attention to iinami, the amount of replies to people saying their handsets must have been jailbroken everytime iTunes throws out an error is tremendous. (Clearly you don't need to have any real knowledge to get to level 3 on these forums, let's hope apple's geniuses know a lot more than some of their customers.)
http://support.apple.com/kb/TS3694
Solution below.
Error 9
This error occurs when the device unexpectedly loses its USB connection with iTunes. This can occur if the device is manually disconnected during the restore process. This issue can be resolved by performing USB troubleshooting, using a different USB dock-connector cable, trying another USB port, restoring on another computer, or by eliminating conflicts from third-party security software.

Yoga Pro 3 - Wifi dropped connections; refuses to reconnect

First day of owning my Yoga Pro 3. Has anyone experienced intermittent wifi failures?
I've had trouble on both access points that I have at home. One is an older 802.11b router (set to channel 1), and other a D-Link815 dual-band bgn router (with the 2.4Ghz radio set to channel 11).
I've experienced problems using both routers on either channel and when using the 5Ghz spectrum as well.
Connectivity with either access point lasts from 5 mins to 30+ mins (in limited time I had available to use it so far).
Far more frustrating is that when dropped, the YP3 refuses to reconnect. Manually selecting the access point in the network connections charm and clicking "Connect" results in failed attempts at connecting and system will refuse to connect to any Access Point for a random amount of time. At one point I had attempted to reconnect about 20+ times before it did reconnect.
Obviously, tried rebooting without any change in behavior.
I uninstalled the Broadcom wireless driver (the system the auto-installed a Microsoft driver which, from the version number, appeared to be an older version of the same Broadcom driver as they used a very similar numbering scheme and were very close). No change. I reverted that change.
Are there known issues with these wifi cards/drivers accessing open wifi connections? I live in the middle of no-where, so have had no compelling reason to secure the access points.
What else should I try?
Thanks

My WiFi connects fine @ 2.4 GHz only Access Point (netgear wnr2000 v2) 4 rooms away (~ 35 feet and my Linksys router is on the same room as me so I get 866.5 Mbps all the time), giving me fluctuating connection speed from 243 to 300 Mbps. I generally don't use the 2.4 GHz band but I occasionally try it to check for stability. It's working fine but there's too much 2.4 GHz clients in our area so I use 5 GHz for Netflix, Hulu steaming where low latency stability is needed.
Definitely try reseating the antenna so you can rule that out. If you still can't connect @ 2.4 GHz, try other 2.4 Ghz access points or it's just that you get a defectve Broadcom 4352 card or it might be even Windows 8.1 drivers itself.
Lenovo Y470: i7-2670QM | 8 GB DDR3 1333 MHz RAM | Nvidia GeForce GT 550M | 500 GB 7200 RPM Seagate HDD | ASUS PCE-AC56 802.11ac Network Adapter | Windows 7 Professional 64-bit

Macbook pro touchpad/curser problems.

macbook pro touchpad curser problems. typing randomly jumps to wherever the curser is resting at the time. unbelievably maddening. multiple devices same all have same problem. hard to believe we cannot find anything on the apple site about this. MANY complaints outside of this site on this issue... clearly a touchpad/battery design flaw being ignored by Cupertino. during the writing of this post, the curser jumped randomly and started typing in a different location six times. IMPOSSIBLE to use as a word processor since typing becomes quite frustrating. HELP. any ideas? Fanboy and shareholder. three macbook pros in the house...all the same problem. (please do not offer separate keyboard as solution...this is a laptop, not a Surface Pro...)

Go step by step and test.
1. Restart
2. Shut down the computer.
    Clean the trackpad with moist not wet microfiber cloth.
    System Preferences > Point & Click
    Try turning off three finger dragging and then turning it on after testing.
3. Is there any Bluetooth device nearby with failing batteries? If so, replace the batteries.
4. Reset PRAM:   http://support.apple.com/kb/PH14222
5. Reset SMC.     http://support.apple.com/kb/HT3964
    Choose the method for:
    "Resetting SMC on portables with a battery you should not remove on your own".
6. Close all windows and quit all applications.
    Click the Spotlight -the magnifying glass icon- in the menu bar. Enter Disk utility in the box.
    Select Disk Utility from the drop down. When the Disk utility window opens up,
    select Macintosh HD, then First Aid.
    Click Repair Disk Permissions button.
    Ignore the time remaining estimate.

BI 7.0 Infoset query open problem: query_tech_name_Fxx is not a valid char.

Our BASIS transport our BW 3.5 queries to BI 7.0 system. We can open all queries on the BI 7.0 box without problem except Infoset queries. The Infoset is composed of two ODSs and when openning it BI 7.0 query designer, can not see any design element in the panes of Rows, Columns, Free Char. and etc., instead the error msg shows (in between two dashed lines below):
Terminate: query_technical_name_Fxx is not a valid characteristic for InfoProvider [A122(BRAIN)]
Diagnosis
Customer enhancement RSR00002 or the implementation of BAdI RSR_OLAB_BADI delivers query_technical_name_Fxx as the characteristic to be calculated. 1. is, however, not a valid key figure for InfoProvider .
System Response
The information from query_technical_name_Fxx is ignored.
Procedure
Check the exit.
Procedure for System Administration
We've checked the enhancement RSR00002 and it's components and find they are all the same as our BW 3.5 system. query_technical_name_Fxx is Company Code InfoObj. in one ODS and it's one of the key to join these two InfoSets.
Any idea?
Thanks

hi Kevin,
check if helps following oss note
Note 983449 - Termin A122 1COLUMN no valid characteristic of infoprovider
Symptom
Termination A 122 Brain occurs when you test and generate a query. The system does not recognise the characteristic 1COLUMN.
Other terms
Query, condition, COB_PRO
Reason and Prerequisites
This problem is caused by a program error.
Solution
SAP NetWeaver 2004s BI
Import Support Package 10 for SAP NetWeaver 2004s BI (BI Patch 10 or SAPKW70010) into your BI system. The Support Package is available once Note 914304 "SAPBINews BI 7.0 Support Package 10", which describes this Support Package in more detail, has been released for customers.
In urgent cases, you can implement the correction instructions.
You must first implement Notes 932065, 935140, 948389, 964580 and 969846, which provide information about transaction SNOTE. Otherwise, problems and syntax errors may occur when you deimplement some notes.

I have lost my Safari url bar ,tried view/customise toolbar but when box opens there is no address bar to drag back can anyone help please

I noticed a couple of days ago that my url bar on my imac was no longer there,I am new to the apple community and I am not sure how to progress with my qustion. I have tried selecting :- view / customise toolbar but the dropdown box which has various options to drag and drop does not show the address bar I am stuck can you help

Thanks.... I too had this problem and didn't have a clue why it disappeared at times and how it reappeared as well. Got another bird with the same stone
     Re: I have lost my Safari url bar ,tried view/customise toolbar but when box opens there is no address bar to drag back can anyone      help please
     Aug 15, 2012 10:09 PM (in response to jame5allen)
     Go to: Safari>View Menu>Select 'Show Toolbar'.
BCV

Acrobat X Pro not opening - Part II

I previously posted on this topic on April 19 and 20 (see http://forums.adobe.com/message/5253051#5253051), but surprisingly, received no responses. I am now reposting because the problem continues and I have been unable to find a satisfactory solution. I hope this post will catch the attention of someone knowledgeable with Acrobat X.
Every few weeks, Acrobat X Pro stops opening. I cannot open Acrobat through the Start menu and double-clicking on PDFs does nothing. When Acrobat is working properly, double-clicking a pdf causes it to open in Acrobat. Today is at least the third time I have had this problem. In the past, restarting my computer or repairing the Acrobat installation did not help. The only solution I found was uninstalling and then reinstalling Acrobat X, which usually costs me at least 20 minutes each time I have this problem.
About an hour ago, I was viewing a pdf in Acrobat when suddenly Acrobat shut down and would not reopen. The only possible trigger I can think of was a Windows automatic update that I installed about 7 hours earler. It was a critical, recommended update. It may have had some relationship, but I suspect the problem is instead some unresolved bug in Acrobat X.
Is anyone aware of this problem and is there a permanent solution?

This is part of a CS6 install. I guess if on Oct. 24 (30 days from Sept. 24) Acrobat is not launching, I will know that the problem is linked to the article you cited.
By the way, the above link misdirects. The correct link is: http://helpx.adobe.com/creative-suite/kb/acrobat-failed-launch-30-days.html.

Yoga Pro 2 - Display not recognized in windows (Driver or Hardware issue?)

Out of warranty by a month!
Yoga Pro 2 - 256gb, installed new wireless card a month ago. Windows 8.1
The touchscreen still works while the screen is black.
System restarted after sleep mode I think.
The Lenovo logo is displayed, seems to load windows, but when windows loads (I don't see it load so this is an assumption) the screen blanks and the black light is on.
I can connect an external monintor which will connect after a return from sleep mode(odd). Which then turns the backlight off.
When on the external monitor the internal display is not even recognized by windows.
When I boot in safe mode, the internal screen works fine with of course limited capability.
I have reloaded display drivers from the support site.
Right now my internal monitor is not recognized by windows and is dark, and I can use an external monitor.
Anyone have any clues as to what my be going on? Hardware, driver etc???
What information can I provide?
Solved!
Go to Solution.

This is a pretty weird issue with conflicting observations.
1) Screen works in Safe Mode but not in regular boot. (So, not hardware issue)
2) Display works on external monitor in regular mode. (So, not drivers issue)
Did you install the wireless card yourself? Did you unplug the display cable while installing the card?
Could you re-open and check that all connections are good?
Is the Wi-Fi card working well?
I would also recommend a complete reset of the laptop to eliminate the possibility that this is a corrupt driver. You can use the NOVO button to reset your laptop. Make sure to make a backup on external drive for your personal files.
Current System - Lenovo Y510P, GT755M SLI, 8GB RAM, 1TB HDD + 24GB SSD
When your plans fail, your Real Story begins!!

TS4123 When I run autoruns as suggested by TS4123, a DOS program runs but no Windows box opens, so I can't check for LSP conflicts

I am trying to troubleshoot an iTunes problem, which may be related to the resources issue that has been previously identified.
My problem is that once iTunes has been running for more than half a day or so, when I play music the program "skips" through the song, playing snippets a fraction of a second long. A 4 minute song will be done in a few seconds. The program then skips to the next song and this repeats. Rebooting solves the problems for a few hours, then it reoccurs. Other symptoms include iTunes not responding quickly, especially to closing it.
As per TS4123, I tried to rune the Autoruns program to see if I had a conflict. I launched the program and a DOS box opens and runs some command line items, but nothing else happens. I don't see a Windows box like I should.
Help on either problem?
I am running Win4, 64bit, on an HP desktop. I have updated video and audio drivers.

You should run the windows based file AUTORUNS.exe instead.

Yoga 3 pro box opening problem

Similar Messages

Maybe you are looking for