Yoga 3 Pro lmcfrundll​.exe Run Problem, how to fix?

While Lenovo is in the process of developing a solution, an official work-around to the automatic update delivered on February 7th to Yoga 3 Pro laptops bas been released to address the following errors:
lmcfrundll.exe application error       unable to start correctly (0xc000007b)
problem starting c:\program files\lenovo\communications utility\libstartstub.dll      specified module could not be found
Please note this is a work-around, not the final solution.
It is intended for Yoga 3 Pro systems running Win 8.1 on Lenovo Settings Dependency Package version 2.3.1.30 only.
The readme file and work-around can be obtained here:
https://drive.google.com/folderview?id=0B0Wzd6g3yn​HwfmpTQmhxOHBUSGRSN05tejU1cU1hT1hDN3ZEN1MzUlR4LWRO​...
Thank you,
2/20/15 EDIT: Tagging this temp fix as a solution so it can be found by others joining the conversation. I will tag the permanant fix when it becomes available. Amy_Lenovo
Amy Tupper
Technical Resolution Lead, Pervasive Issues
Lenovo US
ThinkPad T431s, S3 Yoga 14, Helix, Edge 11 & 14, E431, IdeaTab A1107, IdeaPad A1-07, IdeaCentre Horizon, Yoga Tablet 2 10 1051
First computer was a 1980 Commodore 64 from Radio Shack/ GEnie SFRT member from 1993-1996
Solved!
Go to Solution.

I have a Yoga 3 Pro, Windows 8.1 Pro x64.
There are errors in the Event Viewer related to the problems of LMCSTART1, LMCSTART2, LMCSTART3, which I will cut and paste below. These are there because they are failing to load as the error message on the pop-up window states.
As for the libstartstub.dll "specified module could not be found", there were not errors or warnings in the Event Viewer related to this, but I have noticed that if I disable LENOVO.TPKNRRES from running (via OneKey Optimizer), that particular error doesn't come up.
Here are the errors now from Event Viewer:
Event ID 1005 (same error listed 3 times as an Application error, with a different RecordID listed below)
Windows cannot access the file  for one of the following reasons: there is a problem with the network connection, the disk that the file is stored on, or the storage drivers installed on this computer; or the disk is missing. Windows closed the program Lenovo® Multimedia and Communications Framework Custom Rundll because of this error.
Program: Lenovo® Multimedia and Communications Framework Custom Rundll
File:
The error value is listed in the Additional Data section.
User Action
1. Open the file again. This situation might be a temporary problem that corrects itself when the program runs again.
2. If the file still cannot be accessed and
    - It is on the network, your network administrator should verify that there is not a problem with the network and that the server can be contacted.
    - It is on a removable disk, for example, a floppy disk or CD-ROM, verify that the disk is fully inserted into the computer.
3. Check and repair the file system by running CHKDSK. To run CHKDSK, click Start, click Run, type CMD, and then click OK. At the command prompt, type CHKDSK /F, and then press ENTER.
4. If the problem persists, restore the file from a backup copy.
5. Determine whether other files on the same disk can be opened. If not, the disk might be damaged. If it is a hard disk, contact your administrator or computer hardware vendor for further assistance.
Additional Data
Error value: 00000000
Disk type: 0
- System
  - Provider
   [ Name]  Application Error
  - EventID 1005
   [ Qualifiers]  49152
   Level 2
   Task 100
   Keywords 0x80000000000000
   EventRecordID for the three different times: 13645 - 13648 -  13651
- EventData
   Lenovo® Multimedia and Communications Framework Custom Rundll
   00000000
 Faulting application name: lmcfrundll.exe, version: 5.0.9.73, time stamp: 0x54ab2d05
Faulting module name: ntdll.dll, version: 6.3.9600.17476, time stamp: 0x54516af9
Exception code: 0xc000007b
Fault offset: 0x000a36e5
Faulting process id: 0x644
Faulting application start time: 0x01d04337a63a774e
Faulting application path: C:\Windows\SysWOW64\lmcfrundll.exe
Faulting module path: C:\windows\SYSTEM32\ntdll.dll
Report Id: 33af5abb-af2b-11e4-8287-f87dd6bcf066
Faulting package full name:
Faulting package-relative application ID:
- System
  - Provider
   [ Name]  Application Error
  - EventID 1000
   [ Qualifiers]  0
   Level 2
   Task 100
   Keywords 0x80000000000000
  - TimeCreated
   [ SystemTime]  2015-02-08T00:41:22.000000000Z
   EventRecordID 13650
   Channel Application
   Security
- EventData
   lmcfrundll.exe
   5.0.9.73
   54ab2d05
   ntdll.dll
   6.3.9600.17476
   54516af9
   c000007b
   000a36e5
   644
   01d04337a63a774e
   C:\Windows\SysWOW64\lmcfrundll.exe
   C:\windows\SYSTEM32\ntdll.dll
   33af5abb-af2b-11e4-8287-f87dd6bcf066 
 Faulting application name: lmcfrundll.exe, version: 5.0.9.73, time stamp: 0x54ab2d05
Faulting module name: ntdll.dll, version: 6.3.9600.17476, time stamp: 0x54516af9
Exception code: 0xc000007b
Fault offset: 0x000a36e5
Faulting process id: 0x15e4
Faulting application start time: 0x01d04337a609bbd0
Faulting application path: C:\Windows\SysWOW64\lmcfrundll.exe
Faulting module path: C:\windows\SYSTEM32\ntdll.dll
Report Id: 33170cdc-af2b-11e4-8287-f87dd6bcf066
Faulting package full name:
Faulting package-relative application ID:
- System
  - Provider
   [ Name]  Application Error
  - EventID 1000
   [ Qualifiers]  0
   Level 2
   Task 100
   Keywords 0x80000000000000
  - TimeCreated
   [ SystemTime]  2015-02-08T00:41:21.000000000Z
   EventRecordID 13647
   Channel Application
   Security
- EventData
   lmcfrundll.exe
   5.0.9.73
   54ab2d05
   ntdll.dll
   6.3.9600.17476
   54516af9
   c000007b
   000a36e5
   15e4
   01d04337a609bbd0
   C:\Windows\SysWOW64\lmcfrundll.exe
   C:\windows\SYSTEM32\ntdll.dll
   33170cdc-af2b-11e4-8287-f87dd6bcf066 
 Faulting application name: lmcfrundll.exe, version: 5.0.9.73, time stamp: 0x54ab2d05
Faulting module name: ntdll.dll, version: 6.3.9600.17476, time stamp: 0x54516af9
Exception code: 0xc000007b
Fault offset: 0x000a36e5
Faulting process id: 0xb74
Faulting application start time: 0x01d04337a5c87954
Faulting application path: C:\Windows\SysWOW64\lmcfrundll.exe
Faulting module path: C:\windows\SYSTEM32\ntdll.dll
Report Id: 32206a90-af2b-11e4-8287-f87dd6bcf066
Faulting package full name:
Faulting package-relative application ID: 
- System
  - Provider
   [ Name]  Application Error
  - EventID 1000
   [ Qualifiers]  0
   Level 2
   Task 100
   Keywords 0x80000000000000
  - TimeCreated
   [ SystemTime]  2015-02-08T00:41:19.000000000Z
   EventRecordID 13644
   Channel Application
   Security
- EventData
   lmcfrundll.exe
   5.0.9.73
   54ab2d05
   ntdll.dll
   6.3.9600.17476
   54516af9
   c000007b
   000a36e5
   b74
   01d04337a5c87954
   C:\Windows\SysWOW64\lmcfrundll.exe
   C:\windows\SYSTEM32\ntdll.dll
   32206a90-af2b-11e4-8287-f87dd6bcf066

Similar Messages

  • HT4970 My reminders app will not want to create reminders for me. What could be the problem, how to fix it? Thanks in advance

    My reminders app will not want to create reminders for me. What could be the problem, how to fix it? Thanks in advance

    Lol idk I updated this iPhone right when I got it because it said there is a new update so I installed it as soon as possible and there is no plus sign over there. I don't know how that happened maybe its something in the setting do you think you know? And when I ask Siri to create me a new reminder and I tell her the time and everything she says are you sure you want to create this reminder I press confirm and then she says I'm sorry but the reminder you are trying to create can not be crated.

  • Avoid MathScipt Comments in EXE, Build & Run Problems - NI Please Fix these Bugs!

    Hello,
    After 4 days of intensive work, I have finally found the solution for two major MathScript Problems:
    1) Mathscript Comments are included in your EXE File !!
        - Yes, if you do not watch your steps, the EXE will include all your % Mathscript Comments!
    2) Problems building, but even worse: An app that builds with NO Error and NO Warnings will not RUN and creates the following misleading Erro Message:
        "The VI is not Executable. The full development version of LabView is required to fix the errors"
        With absolutely NO hint to what VI have the problem.
    I have made myself an internal note how to avoid this problem. I am using LabView 2009, 2010 DS1 Release (I think this is 9.01) under WInXP SP2.
    Rather than retyping everything, I will post the full text of my Notes below. I also mention several other LV BUG in this note, so pleae read carefully.
    One is the TagSrv Error that occurs in LabView 2009 if I programatically deploy Shared Variables under the WinXP Development Environment. After this problem has occured, it will occur every time I restart XP, and in essense I have to restore to before I did this (thanks Nortong Ghost !!!).
    Below you can find the full unabridged version of my Build, Run and Bug Notes for LV 2009 / 2010 DS1 (9.01). Hope they can be helpful to my fellow LabView programmers!
    2010-07-03:
    Building under LabView 2009 / 2010 DS1 Release (version 9.01)
    Follow the steps below:
    a) To successfully build an EXE that also runs
    b) Avoid that MathScript Comments are included in the EXE !!!!!!!!!!!!!!!!
    Before Building:
    I) Recompile All  by pressing Ctrl+Shift and pressing the RUN button on the Application_References.vi
       Then Save All (about 1200 Vis are saved)
    II) Make Sure that NO User Defined Mathscript (and Mathscript Nodes?) define Empty Functions:
        This seemed to cause the following problem with the built EXE: The main VI will be broken, and a dialog reports:
        "The VI is not Executable. The full development version of LabView is required to fix the errors"
        MathScitp BUG: Empty Functions causes no Build Errorm but RUN Error:
        The following User Defined MathScript .m files are candidates:
        log_write() and log_clear() whith do_log_write() and do_log_clear() commented out, these functions are empty.
        When calls to log_write() and log_clear() where removed, the problem above vanished !
    Building the EXE:
    1) Additional Exclusions:
     -"Disconnect type definitions": YES
     - "Remove unused polymorphic VI instantces": YES
     - "Remove unused members of project libraries": NO (do not know if this is important)
    2) Advanced:
     - Enable Debugging: "NO"
    3) Mathscript BUG: The Application Builder Includes ALL MathScript Comments in the EXE if you use the New Build File Layout:
       IMPORTANT !!!!!!!!!!!!!
       Advanced:
       "Use LabView 8.x file layout": YES !!!!!!!
       Using the new layout, causes ALL COMMENTS FROM USER DEFINED MATHSCRIPT .M FILES TO BE INCLUDED IN THE .EXE !!!!!!!
    4) BUG: DSC Reference Problem in LabView 2010 DS1 release:
       In VI Deploy_Shared_Variables.vi we deploy alle Shared Variables using the "Deploy Libraries.vi" which is a part of the DSC option.
       As long as only deploying of Variables is used, using this VI should NOT require any DSC Runtime license.
       We have used this before with no compilation problems.
       However, starting with LV 2009 SP1 (or was it the DS1 2010 upgrade) LV will start nagging us to resolve references to tens of VIs
       in the DSC lib file ! Solution: Used press "Stop" on the dialog, and the Build will succeed and the EXE will work !
       Optionally, we could use the following Invoke node for the deployment:
       (see: http://digital.ni.com/public.nsf/allkb/04D9A85B6967EE87862571140065EEC6). Excerpt from this description:
      <<Right-click the block diagram to bring up the programming palette and go to Programming»Application Control and place the
        Invoke Node on the block diagram. Using the hand tool, click Method and select Library»Deploy Library>>
    5) LabView BUG: Do NOT RUn the Application under the WIn XP SP2 Development Environment if the APP Deploys Shared Vars:
       This will cause the Dreaded TagSrv Error:  "TagSrv.exe: This application has requested the runtime to terminate in an unusual way".
       After this Error has occured, it will reoccur each time WinXP SP2 is restarted, and (Network) Shared Variables will NOT work any more!
    Geir Ove
    Attachments:
    LabView_Tagsrv_Error.jpg ‏26 KB

    Hello Geir,
    I have tried to reproduce the behavior you are seeing where .m file comments appear in the final built executable.  However, I am unable to do so using LabVIEW 2009 SP1.  I have a caller VI with a MathScript node that calls the adder function in adder.m.  The contents of adder.m are as follows:
    % ADDER This function adds 3 to its input variable
    %   y = adder(x)
    %   INPUT: x
    %   OUTPUT: y, equal to x + 3
    function y = adder(x)
    y = x + 3;
    I have configured the build specification as you mention in steps (1) and (2):
    Additional Exclusions
     - "Disconnect type definitions" Yes
     - "Remove unused polymorphic VI instances" Yes
     - "Remove unused members of project libraries" No
    Advanced
     - "Enable Debugging" No
    At first, I did not include the adder.m file in the project.  I built the application and was not able to find the text "adder" anywhere in the EXE.  Then, I added the .m file to the project and put it in the "Always Included" section in "Source Files."  Again, I was not able to find the search text in the built EXE.  In step 3, you mention
    geirove wrote:    
       "Use LabView 8.x file layout": YES !!!!!!!
    but in the 5th post in this thread, you state
    geirove wrote:
    Compile using the new compile method ( Use LabView 8.x file layout": NO),
    I have tried both settings in the Advanced section, but again, I am not able to find any comments in the EXE.  I even added a call to the "path" function in adder.m.  This puts a warning glyph on the caller MathScript node and generates different code.  The EXE will return an unknown symbol error for adder (any VI with a warning glyph will not work in a built app), but I am not able to find any comments in the EXE.  This project is attached below.
    As for your other item with a broken EXE if you call empty functions, I am unable to reproduce this as well.  I have taken the last attachment to your third post in this thread (the log_write function) and called it from the caller VI as well.  The EXE runs just fine and I do not find any comments in this EXE either.
    Unfortunately, there was a rather serious issue in the LabVIEW 2009 MathScript RT Module, where some internal MathScript VIs could become corrupted when building executables.  Have you tried running the "Find Bad Instantiations" tool from this Knowledge Base article?  Simply installing the SP1 version on top may not have corrected any VIs that may be corrupted.
    Due to our difficulty in reproducing the issues you mention, could you modify the attached project or else attach a new project, appropriately configured, that builds an EXE with .m comments embedded in it?  This way, we can uncover any minute details that we're overlooking.
    Grant M.
    Senior Software Engineer | LabVIEW MathScript | National Instruments
    Attachments:
    MComments.zip ‏186 KB

  • Indesign CS6 tries to open all my .exe files. How to fix this?

    After installing a patch for Indesign CS6 all my .exe files are opening with Indesign. Now I can't even uninstall the program because it needs to open an .exe file to do so. How to fix this problem? I'm on Windows 7

    The first thing I would try is System Restore

  • On (release) action problem - how to fix the loading issue?

    Hi,
    I'm making a progress with the website in Flash. I have pretty much things already done. Motion tweens that change alpha in percentage ammount are working correctly - I've used them for loading pages but I encountered a one tiny problem...
    Describing the website: there are buttons that - when you click - play an animation (motion tween with alpha changing) to load a proper page that is pinned with a particular button. So: home button loads the home page, bio button loads the bio page etc. All pages go with the motion tween - they fade in the website (from alpha 0% to 100%). Everything is fine and the website with everything works just perfect! But: there's one thing that doesn't keep me calm. When I open my website in a browser to test it and I click on each button to load pages - everything is ok, but when I want to click the same button few times - other things are being loaded by clicking the same button.
    For instance: I click the "bio" button once and it loads my biography page with the motion tween as I described before. But when I want to click it secondly or thirdly it doesn't load my biography page anymore but a page before that one (in this case: home page). When I click it again the button loads my bio page again. So - in sum - it doesn't load the same page all the time, but randomly: the proper one or the one before (in the timeline).
    My AC code for each button is simple, for example:
    on (release) {
        gotoAndPlay(173);
    Also I've got the "actions" layer that carries stop(); command in places that are for it.
    I tried with _root.gotoAndPlay and also with frame_number +1 and always the same problem.
    I hope it isn't anything serrious and can be fixed.
    I'll be very grateful for help.
    Greets!
    J.J.

    As I explained in my post: I test my website in the browser (firefox), I click on a particular button which loads a particular section. It works with all buttons but sometimes when I click the button an incorrect section appears.
    For example: I click biography button, and the biography section appears. Then I click contact button and contact section appears. Then when I want to see biography section again and click on the biography button, the biography section doesn't appear but the other section appears, for instance: home section, about section, gallery section or other from what I have.
    Concluding from the entire description I've placed above in the topic I don't know why this thing happens and I need some help how to fix this issue of loading sections firstly correct and then, after some clicking - incorrect.
    I hope I really presented it clearly.

  • My Mac Pro is assembled wrong. How to fix it?

    My macbook pro bottom case is assembled wrong. The rightside of the "bottom case" is further in than the left side. When apple assembled it they either have tightened it too much on the right side,but if not this must be a manufacture failure? Can i fix this myself by untighten the screw or will it just be loose? It isnt a big problem but when i have the mac on a table it wont be stable (it flick back and forth) because the right and left side isnt assembeled the same way. So the bottom case is perfectly assembeled on the left side and when i feel with my finger over the "mac case" and "bottom cover" i dont feel any bump. But when i stroke my finger on the left side, i without doubt felt the difference between the "bottom cover" and "mac case". So I will probably need to buy the special screwdriver and try to fix it myself. But if it will just be loose afterwards, do apple replace the macbook body then? Wonder if anybody else have had this problem, and if, how did you fix it? Hope you understand my terrible english

    Don't touch the screws yourself — take it to an Apple Store or authorized service provider, exactly as it is now, for a warranty repair.

  • The update server never updates, runs always,how to fix ?

    The "UPDATES" to server,never connects and never stops running.

    Make sure that you allow the updater.exe program in the firewall.
    If there are problems with updating then best is to download the full version of the Firefox installer.
    If there are still problems with applying the update then uninstall the currently installed version and delete the Firefox program folder to remove any leftover files.
    *C:\Program Files\Mozilla Firefox\
    *http://kb.mozillazine.org/Installation_directory
    Download a fresh Firefox copy and save the file to the desktop.
    *Firefox 15.0.x: http://www.mozilla.org/en-US/firefox/all.html
    Uninstall your current Firefox version, if possible, to cleanup the Windows registry and settings in security software.
    *Do NOT remove personal data when you uninstall your current Firefox version, because all profile folders will be removed and you will also lose your personal data like bookmarks and passwords from profiles of other Firefox versions.
    Remove the Firefox program folder before installing that newly downloaded copy of the Firefox installer.
    *It is important to delete the Firefox program folder to remove all the files and make sure that there are no problems with files that were leftover after uninstalling.
    *http://kb.mozillazine.org/Uninstalling_Firefox
    Your bookmarks and other profile data are stored in the Firefox Profile Folder and won't be affected by an uninstall and (re)install, but make sure that "remove personal data" is NOT selected when you uninstall Firefox.
    *http://kb.mozillazine.org/Profile_folder_-_Firefox
    *http://kb.mozillazine.org/Profile_backup

  • MacBook Pro (Mid 2010) - crashing problems remain after fixes under warranty, what can I do?

    Hey all,
    So I've had this computer (MacBook Pro 15" mid-2010 model) for a little over a year (bought it a few days after the refresh). Later in the year, it started to get regular crashes until it would become completely unresponsive to the point where turning it on meant I got several beeps (which apparently suggested the RAM was at fault). It was still under warranty, so I had it fixed (RAM replaced). The problems remained, so I returned to have it properly fixed. I went back and forth several times where it was said it had been fixed but actually wasn't. It got to the point where the whole logic board had to be replaced. Although now the keyboard backlight wasn't working, so had to go back and have that fixed as well.
    Here's the problem, the MacBook Pro is no longer under warranty. However, the same crashes have started up again. Though it hasn't quite reached the state it was in last year, it still crashes like it use to back then when the crashes first started and I'm afraid that it will eventually reach the state it was in last year. Since the problem is the same as when I originally went to have to MacBook Pro fixed (which was while it was still under warranty) and it took several fixes before it seemed like it was fixed, it could very well still have the same problem. So with that reasoning, am I still covered under warranty?
    Originally, I didn't think much of these crashes because all computers crash every now and again. But today when it crashed, it began beeping like it did last year when it wasn't working at all anymore. The crash in itself is totally random in relation to what I may be doing on the computer. The ways it crashes varies: random sudden shut down (not dead battery), a screen comes up suggesting I restart, screen completely freezes, screen goes weird with random color lines.
    Also, I don't always get a crash report but I kept one that I did get about two weeks ago after a crash. Perhaps someone technical can take a look and tell me where the problem is in this case?:
    Interval Since Last Panic Report:  181649 sec
    Panics Since Last Report:          1
    Anonymous UUID:                    C26D4B1C-3E52-4D07-977E-7F25EF93E6C2
    Thu Jul  7 18:55:39 2011
    panic(cpu 1 caller 0x2abf6a): Kernel trap at 0x01258451, type 14=page fault, registers:
    CR0: 0x8001003b, CR2: 0x00065588, CR3: 0x00100000, CR4: 0x00000660
    EAX: 0x00065528, EBX: 0x00065528, ECX: 0x00000001, EDX: 0x00480000
    CR2: 0x00065588, EBP: 0x5cc5bd48, ESI: 0x00000000, EDI: 0x5528d0a8
    EFL: 0x00010006, EIP: 0x01258451, CS:  0x00000008, DS:  0x00000010
    Error code: 0x00000000
    Backtrace (CPU 1), Frame : Return Address (4 potential args on stack)
    0x5cc5bb68 : 0x21b837 (0x5dd7fc 0x5cc5bb9c 0x223ce1 0x0)
    0x5cc5bbb8 : 0x2abf6a (0x59e3d0 0x1258451 0xe 0x59e59a)
    0x5cc5bc98 : 0x2a1a78 (0x5cc5bcb0 0x0 0x5cc5bd48 0x1258451)
    0x5cc5bca8 : 0x1258451 (0xe 0xcaf90048 0x5cc50010 0xe80f0010)
    0x5cc5bd48 : 0x124ffa5 (0x65528 0x6 0x8759000 0x0)
    Unaligned frame
    Backtrace terminated-invalid frame pointer 0x5cc5be2a
          Kernel Extensions in backtrace (with dependencies):
            com.apple.driver.AppleIntelCPUPowerManagement(142.6.0)@0x124e000->0x1271fff
    BSD process name corresponding to current thread: kernel_task
    Mac OS version:
    10K540
    Kernel version:
    Darwin Kernel Version 10.8.0: Tue Jun  7 16:33:36 PDT 2011; root:xnu-1504.15.3~1/RELEASE_I386
    System model name: MacBookPro6,2 (Mac-F22586C8)
    System uptime in nanoseconds: 4281198920890
    unloaded kexts:
    com.apple.driver.AppleUSBUHCI 4.2.0 (addr 0x148a000, size 0x65536) - last unloaded 151367621515
    loaded kexts:
    com.vmware.kext.vmnet 3.0.0
    com.vmware.kext.vmioplug 3.0.0
    com.vmware.kext.vmci 3.0.0
    com.vmware.kext.vmx86 3.0.0
    com.paceap.kext.pacesupport.snowleopard 5.7.2
    com.vara.driver.VaraAudio 1.0.3
    tc.tctechnologies.driver.Saffire 8028
    com.digidesign.iokit.DigiDal 8.0.4f2
    com.apple.driver.AppleHWSensor 1.9.3d0 - last loaded 36716575405
    com.apple.driver.AppleBluetoothMultitouch 54.3
    com.apple.filesystems.autofs 2.1.0
    com.apple.driver.AGPM 100.12.31
    com.apple.driver.AppleMikeyHIDDriver 1.2.0
    com.apple.driver.AppleHDA 2.0.5f13
    com.apple.driver.AppleMikeyDriver 2.0.5f13
    com.apple.driver.AudioAUUC 1.57
    com.apple.driver.AppleUpstreamUserClient 3.5.7
    com.apple.driver.AppleMCCSControl 1.0.20
    com.apple.driver.SMCMotionSensor 3.0.1d2
    com.apple.Dont_Steal_Mac_OS_X 7.0.0
    com.apple.iokit.CHUDUtils 364
    com.apple.iokit.CHUDProf 366
    com.apple.driver.AppleGraphicsControl 2.10.6
    com.apple.driver.AudioIPCDriver 1.1.6
    com.apple.driver.ACPI_SMC_PlatformPlugin 4.7.0a1
    com.apple.driver.AppleLPC 1.5.1
    com.apple.GeForce 6.3.6
    com.apple.kext.AppleSMCLMU 1.5.2d10
    com.apple.driver.AppleIntelHDGraphics 6.3.6
    com.apple.driver.AppleIntelHDGraphicsFB 6.3.6
    com.apple.driver.AppleUSBTCButtons 201.6
    com.apple.driver.AppleUSBCardReader 2.6.1
    com.apple.driver.AppleIRController 303.8
    com.apple.driver.AppleUSBTCKeyboard 201.6
    com.apple.iokit.SCSITaskUserClient 2.6.8
    com.apple.BootCache 31.1
    com.apple.AppleFSCompression.AppleFSCompressionTypeZlib 1.0.0d1
    com.apple.iokit.IOAHCIBlockStorage 1.6.4
    com.apple.driver.AppleUSBHub 4.2.4
    com.apple.driver.AppleFWOHCI 4.7.3
    com.apple.driver.AirPortBrcm43224 428.42.4
    com.apple.iokit.AppleBCM5701Ethernet 3.0.5b8
    com.apple.driver.AppleEFINVRAM 1.4.0
    com.apple.driver.AppleSmartBatteryManager 160.0.0
    com.apple.driver.AppleAHCIPort 2.1.7
    com.apple.driver.AppleUSBEHCI 4.2.4
    com.apple.driver.AppleACPIButtons 1.3.6
    com.apple.driver.AppleRTC 1.3.1
    com.apple.driver.AppleHPET 1.5
    com.apple.driver.AppleSMBIOS 1.7
    com.apple.driver.AppleACPIEC 1.3.6
    com.apple.driver.AppleAPIC 1.4
    com.apple.driver.AppleIntelCPUPowerManagementClient 142.6.0
    com.apple.security.sandbox 1
    com.apple.security.quarantine 0
    com.apple.nke.applicationfirewall 2.1.12
    com.apple.driver.AppleIntelCPUPowerManagement 142.6.0
    com.apple.driver.IOBluetoothHIDDriver 2.4.5f3
    com.apple.driver.AppleMultitouchDriver 207.11
    com.apple.driver.DspFuncLib 2.0.5f13
    com.apple.driver.AppleProfileReadCounterAction 17
    com.apple.driver.AppleProfileTimestampAction 10
    com.apple.driver.AppleProfileThreadInfoAction 14
    com.apple.driver.AppleProfileRegisterStateAction 10
    com.apple.driver.AppleProfileKEventAction 10
    com.apple.driver.AppleProfileCallstackAction 20
    com.apple.driver.AppleSMBusController 1.0.10d0
    com.apple.iokit.IOFireWireIP 2.0.3
    com.apple.iokit.IOSurface 74.2
    com.apple.iokit.IOBluetoothSerialManager 2.4.5f3
    com.apple.iokit.IOSerialFamily 10.0.3
    com.apple.iokit.CHUDKernLib 365
    com.apple.iokit.IOAudioFamily 1.8.3fc2
    com.apple.kext.OSvKernDSPLib 1.3
    com.apple.driver.AppleHDAController 2.0.5f13
    com.apple.iokit.IOHDAFamily 2.0.5f13
    com.apple.iokit.AppleProfileFamily 41.4
    com.apple.driver.IOPlatformPluginFamily 4.7.0a1
    com.apple.driver.AppleSMBusPCI 1.0.10d0
    com.apple.driver.AppleBacklightExpert 1.0.1
    com.apple.driver.AppleSMC 3.1.0d5
    com.apple.nvidia.nv50hal 6.3.6
    com.apple.NVDAResman 6.3.6
    com.apple.iokit.IONDRVSupport 2.2
    com.apple.iokit.IOGraphicsFamily 2.2
    com.apple.driver.BroadcomUSBBluetoothHCIController 2.4.5f3
    com.apple.driver.AppleUSBBluetoothHCIController 2.4.5f3
    com.apple.iokit.IOBluetoothFamily 2.4.5f3
    com.apple.iokit.IOSCSIBlockCommandsDevice 2.6.8
    com.apple.iokit.IOUSBMassStorageClass 2.6.7
    com.apple.driver.AppleUSBMultitouch 207.7
    com.apple.iokit.IOUSBHIDDriver 4.2.0
    com.apple.driver.AppleUSBMergeNub 4.2.4
    com.apple.driver.AppleUSBComposite 3.9.0
    com.apple.iokit.IOSCSIMultimediaCommandsDevice 2.6.8
    com.apple.iokit.IOBDStorageFamily 1.6
    com.apple.iokit.IODVDStorageFamily 1.6
    com.apple.iokit.IOCDStorageFamily 1.6.1
    com.apple.driver.XsanFilter 402.1
    com.apple.iokit.IOAHCISerialATAPI 1.2.6
    com.apple.iokit.IOSCSIArchitectureModelFamily 2.6.8
    com.apple.iokit.IOFireWireFamily 4.2.6
    com.apple.iokit.IOUSBUserClient 4.2.4
    com.apple.iokit.IO80211Family 320.1
    com.apple.iokit.IONetworkingFamily 1.10
    com.apple.iokit.IOAHCIFamily 2.0.6
    com.apple.iokit.IOUSBFamily 4.2.4
    com.apple.driver.AppleEFIRuntime 1.4.0
    com.apple.iokit.IOHIDFamily 1.6.6
    com.apple.iokit.IOSMBusFamily 1.1
    com.apple.kext.AppleMatch 1.0.0d1
    com.apple.security.TMSafetyNet 6
    com.apple.driver.DiskImages 289
    com.apple.iokit.IOStorageFamily 1.6.3
    com.apple.driver.AppleACPIPlatform 1.3.6
    com.apple.iokit.IOPCIFamily 2.6.5
    com.apple.iokit.IOACPIFamily 1.3.0

    I can assure you that the sympton is indeed identical. For as the computer got worse, eventually it refused to start up and made 3 beeps. It has done this before, but today more times than before (just like when it first had this problem). Where-ever you go on the internet, it will tell you that the 3 beeps suggest the RAM is at fault. So, the same 3 beeps, means the same problem, which is the RAM.
    With that in mind, I re-ask my question with the same reasoning and justification; am I still covered under warranty? (Reasoning/Justification: Considering the original problem was not entirely fixed, though something else was to make the MacBook Pro last a little longer before the reoccurance of this problem).

  • MacBook running slow, how to fix?

    About three months ago my 2010 macbook started running slow and has progressively gotten worse. There are no downloads that triggered anything and at first I found that keeping iTunes closed helped speed everything up, but even that isnt helping now. Help?

    Back up your documents and everything else important to you, not that there is any reason to believe your hard disk may be failing, but the symptoms you describe may presage an impending disk failure, and you should have backups anyway.
    To help determine the possible causes of this behaviour read the following. None of what follows is intended to fix anything, but it will provide the additional information required to advance troubleshooting:
    Boot OS X Recovery by holding ⌘ and r (two fingers) while you start your Mac. At the Mac OS X Utilities screen, select Disk Utility. Select your startup volume (usually named "Macintosh HD") and click the Repair Disk button. Describe any errors it reports in red. If Disk Utility reports "The volume Macintosh HD appears to be OK" in green then you can be reasonably (though not completely) assured your hard disk is in good working order.
    When it finishes restart your Mac and test again for operation. If it's still not behaving as you expect it should, please post the results of EtreCheck in accordance with the following instructions:
    Apple Support Communities contributor etresoft wrote a very useful app to quickly gather certain system information that may help point to a cause of this problem. Read about it here. It contains a link to download EtreCheck. Don't download it from anywhere else (such as may be found by following the results of an Internet search).
    Click Open - etresoft contributes to this forum frequently and can be considered a trustworthy developer.
    It will take a moment to run as it collects its data.
    Copy and paste its output in a reply.
    Do not be concerned about anything that says "Problem" or “failed” or anything else that may appear in red.
    EtreCheck was designed to remove any personal information (such as your computer's name and serial numbers) but if you see anything that looks like an email address or any other personal information that should not be divulged to others, please delete or obscure that information when you post the reply.
    When you are finished with EtreCheck, quit the program. It occupies very little space, and you can keep it or drag it to the Trash as you wish.
    After completing the above please determine if the problems also occur in "Safe Mode":
    Safe Mode or "Safe Boot" is a troubleshooting mode that bypasses all third party system extensions and loads only required system components. Read about it: Starting up in Safe Mode
    You must disable FileVault before you can start your Mac in Safe Mode.
    Starting your Mac in Safe Mode will take longer than usual, graphics will not render smoothly, audio is disabled on some Macs, and some programs (iTunes for example) may not work at all.
    Merely starting your Mac in Safe Mode is not intended to resolve the problem, it's to observe its performance without certain additional components.
    To end Safe Mode restart your Mac normally. Shutdown will take longer as well.
    System performance problems for reasons that cannot be isolated to any other cause justify an SMC reset. Be sure to read the procedure carefully and follow all the steps exactly as written, even if they seem inapplicable or trivial.

  • Errors filling up daily.out file, streaming audio/vid problems, how to fix

    I've been experincing some seemingly random problems with my macbook
    1) Hard drive suspiciously full
    2) Cursor skipping around the screen when using the track pad, I finally disabled the pad and solely use an external wireless mouse. Occasionally when I turn the computer on the cursor will move around, but I'll be unable to select anything with the left click, right click still works, when I restart again the problem goes away. May or may not be related to other problems
    3) Recently have been having problems with streaming video/audio. The videos will load fine, but the audio will start skipping and soon the video will stop. This happens most noticeably with Netflix, which tells me I have an audio problem that requires that I reinstall my "audio card drivers." It also happens with video from vimeo, youtube, and other sources, regardless of whether I'm using Firefox or Safari. On the other hand, songs on itunes work fine. I check my download speed, which is actually above what I'm paying for. My google fu has failed me in determining what the actual problem is.
    Today I determined that the daily.out file is 19.6 gb, and when checking the log I found many many many repetitions of the following errors:
    "Fri May  4 15:02:00 House kernel[0] <Debug>: IOAudioStream\[0x57b5d00\]::clipIfNecessary() - Error: attempting to clip to a position more than one buffer ahead of last clip position (18,2c44)->(1a,1882)."
    Alternating with:
    "Fri May  4 14:34:37 House Firewall[62] <Info>: Deny Belkin Router Mo data in from 192.168.2.1:45563 to port 10111 proto=17"
    So, I'm thinking my huge daily.out file is related to my audio problems. Any ideas on what's up with my audio/firewall?
    Other common errors:
    Mon Apr 30 12:16:46 House com.apple.launchd[1] (com.google.keystone.daemon) <Warning>: Throttling respawn: Will start in 10 seconds
    Mon Apr 30 12:16:16 House com.apple.launchd.peruser.502[193] (com.macpaw.CleanMyMac.volumeWatcher[57563]) <Warning>: Exited with exit code: 1
    Mon Apr 30 12:12:29 House com.apple.launchd[1] (at.obdev.littlesnitchd[57493]) <Warning>: Exited with exit code: 1
    I know I can clear the daily.out file, but I'd like to address the problems filling it up so I don't have to keep emptying it. If I have to reinstall my OS, fine, but I'd rather not deal with it if I don't have to. Thanks so much for any ideas.

    I have a suspicion that the problem is not in the recording device itelf, but rather in the playback-software, which is struggling with an unfamiliar audio format/codec/whatever-it's-called... I opened the file in QuickTime Player 7 (7.6.6) and selected "Show Movie Properties" and it says:
    "Video Track: H.264
    Sound Track: Integer (Little Endian)"
    All current Mac systems support Integer (both Big and Little Endian) audio natively. The fact you can hear anything at all proves that the audio is playing back. The most likely problem would be a malfunction associated with the mic pickup.

  • HT1549 I can not see other itunes libraries on itunes, bonjour is the problem, how to fix it

    How can i re-instal Bonjour in i-tunes so i can see other music libraries in my network

    Do you need Bonjour to wirelessly sync iPod?
    https://discussions.apple.com/thread/3952590?start=0&tstart=0

  • Fusion Middleware Control 11.1.1.2 does not start/run.  How to fix.

    Hello,
    1. The Fusion Middleware Control 11.1.1.2 on Infrastructure Home does not response after entering userid and password and click on login.
    http://hostname:7001/em
    2. The Fusion Middleware Control 11.1.1.2 on Mid-tier Home does not run - http error 404. http://hostname:7002/em
    Does anyone know what's wrong or where to look for errors?.
    Server is running Linux SUSE SLES-10 SP3.
    Upgrade from AS 10g 10.1.2.2 to 11.1.1.2 and all Infrastructure Home and Mid-tier Home components started OK with opmnctl startall.
    The Fusion Middleware Admin Console 11.1.1.2 on Infrastructure Home works.
    The Fusion Middleware Admin Console 11.1.1.2 on Mid-tier Home works.
    Thanks a lot.

    You have to start the NodeManager first.
    Ex.
    export WL_HOME=/u01/app/oracle/product/fmw/wlserver_10.3
    cd $WL_HOME/server/bin
    ./startNodeManager.sh
    Then you can start the AdminServer
    Ex.
    export MW_HOME=/u01/app/oracle/product/fmw
    export DOMAIN_HOME=$MW_HOME/user_projects/domains/FormsReports
    ###export ORACLE_HOME=/u01/app/oracle/product/fmw/oracle_pfrd
    cd $DOMAIN_HOME/bin
    nohup $DOMAIN_HOME/bin/startWebLogic.sh &

  • How to fix some scripts not working just in CC?

    Tried to use a well known script in IDCC:
    TurnGrepStyles2CharStyles.jsx
    and not worked; but in CS6 it was running.
    How to fix it?

    This is the Script in question
    TurnGrepStyles2CharStyles
    An InDesign CS4 JavaScript by FourAces, The Final Touch 2006
    Based on the original "Turn grep styles to character styles.scpt" AppleScript by Nye Hughes
    Version 1.0.0
    Converts all the Paragraph Styles applied GREP Styles to standard Character Style applience.
    if(app.documents.length != 0){
        var myDoc = app.activeDocument;
        var myParaStyles = myDoc.paragraphStyles;
        var myCount = 0;
        var myCharStyleList = "";
        for(i=0; i<myParaStyles.length; i++){
            var myGrepStyles = myParaStyles[i].nestedGrepStyles;
            for(n=0; n<myGrepStyles.length; n++){
                var myGrepFind = myGrepStyles[n].grepExpression;
                var myFindParaStyle = myParaStyles[i];
                var myChangeCharStyle = myGrepStyles[n].appliedCharacterStyle;
                var myGrepChange = NothingEnum.nothing;
                var myFoundItems = runFindChange(myDoc, myGrepFind, myGrepChange, myFindParaStyle, myChangeCharStyle);
                myCount = myCount + myFoundItems.length;
                myCharStyleList = myCharStyleList+"\""+myGrepStyles[n].appliedCharacterStyle.name+"\", ";
        if(myCount > 0){
            alert("Applied character styles:\r"+myCharStyleList+"to "+myCount+" instances of Grep Styled text.");
        else{
            alert("No instances of grep styled characters found.\rNothing Changed.");
    else{
        alert("Where\'s my document?!\rWell, I\'ll actually need one to perform my magic...");
    function runFindChange(myObject, FindWhat, ChangetoWhat, FindParaStyle, ChangeCharStyle){
        //Clear the find/change preferences.
        clearFindChangePrefs()
        //Set the find options.
        app.findGrepPreferences.appliedParagraphStyle = FindParaStyle;
        app.findGrepPreferences.appliedCharacterStyle = null;
        app.changeGrepPreferences.appliedCharacterStyle = ChangeCharStyle;
        app.findGrepPreferences.findWhat = FindWhat;
        app.changeGrepPreferences.changeTo = ChangetoWhat;
        return myObject.changeGrep();
    function setFindChangeOptionstoDefaults(){
        var myFindChangeTextOpts = app.findChangeTextOption;
        myFindChangeTextOpts.caseSensitive = false;
        myFindChangeTextOpts.includeFootnotes = true;
        myFindChangeTextOpts.includeHiddenLayers = false;
        myFindChangeTextOpts.includeLockedLayersForFind = false;
        myFindChangeTextOpts.includeLockedStoriesForFind = false;
        myFindChangeTextOpts.includeMasterPages = true;
        myFindChangeTextOpts.wholeWord = true;
    function clearFindChangePrefs(){
        //find/change text preferences
        app.findTextPreferences = null;
        app.changeTextPreferences = null;
        //find/change grep preferences
        app.findGrepPreferences = null;
        app.changeGrepPreferences = null;
        //find/change glyph preferences
        app.findGlyphPreferences = null;
        app.changeGlyphPreferences = null;

  • How to fix the BitRate & FrameRate

    hi all.
    I met a problem, how to fix the BitRate and FrameRate when sent by transmitter to the network using RTP protocol, and received by receiver at the same BitRate and FrameRate? Is there a mechanism in JMF to update the BitRate and FrameRate using the RTCP protocol?
    thanks.

    hi all.
    after creating the processor for the input datasource from a camera, i use following codes to set the framerate for the processor:
    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
    FrameRateControl fr=(FrameRateControl)processor.getControl("javax.media.control.FrameRateControl");
    BitRateControl br=(BitRateControl) processor.getControl("javax.media.control.BitRateControl");
    br.setBitRate(1000000);
    System.out.println("frame rate= "+fr.setFrameRate(30)+"fps");
    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
    the output is:
    ~~~~~~~~~~~~~~~~~
    frame rate= -1.0fps
    ~~~~~~~~~~~~~~~~~
    according to the API documents of JMF2.1.1e, this output means "Returns -1 if it is unknown or it is not controllable".
    what should do to set the framerate for the processor? many thanks.

  • How to fix a problem with my book pro that has a gray screen with a folder with a question mark on it

    does any one know how to fix a problem with my book pro that has a gray screen with a folder with a question mark on it?

    Hello Mokhtary123 and welcome to Apple Support Communities,
    It will help us diagnose your problem to know the exact model, size, year built, RAM installed and OS you're running.
    But basically your system can't find the boot disk. Usually this is a symptom of a dead/dying/corrupted hard drive;
    A flashing question mark or globe appears when you start your Mac - Apple Support
    OS X Recovery
    http://support.apple.com/en-us/HT4718

Maybe you are looking for

  • Mail Adapter Problem --- Unable to save deleted messages

    Hi All, I'm using a sender mail adapter. The XI adapter is polling the mailbox properly. I have choosen the option <b>Delete Messages Once Read</b> and I have also mentioned a folder for the deleted messages. But the messages after processing are del

  • My images always print too dark.

    Colors are perfect but I have to guess at how much to lightne an image on screen to get it to print at proper lightness/darkness. Printing with a Canon Pro 9000

  • Data monitor app

    Does apple have a diagnostic app, mainly interested in data usage and what app/service usses my data that one can get acces to? For 3 times in the last 3 weeks I have used upp my 5GB of data (had to buy more) It is almost imposible to track it down s

  • 1) Compressor artifacts and 2) Processes not responding

    The whole reason I switched from Windows/Premier to Mac/Final Cut was to avoid broken software. I'm beginning to think the Mac is no better. Well, that's not entirely true. I think OS X is more stable than any version of windows but DVD Studio Pro 4.

  • Process chain running :doubt

    Hi, I had scheduled one process chain which is running now--- now its in last step that is "deleting overlapping request in infocube----" i had checked this job : it is running with out any hassles-- now after this only AND process is there to finish