Yoga 3 pro - screen wont stop flickering since installing windows 10!

HI. I hope someone can help. I just upgraded to Windows 10 and my screen continously flickers! I assume this is because its clashing with some pre installed lenovo software. anyone have the same problem? i dont think its any other software as I dont have much installed on my PC as i normally only use webapps (only the usual additions google chrome, anti virus)  model name: 80HE Lenovo yoga 3 pro 1370 appreciate your help. i am going crazy with this cheers Neil

I seemed to have found a way to fix the flickering after the windows 10 upgrade. I went to Lanovo's support page and installed: INTEL VGA DRIVER FOR WINDOWS 10 (64-BIT) - LENOVO YOGA 3 PRO-1370 http://support.lenovo.com/us/en/products/laptops-and-netbooks/yoga-series/yoga-3-pro-1370-laptop-lenovo/80he/downloads/DS103937 When installing, it said that I had a more recent version of the driver, and I had to verify that I wanted to install the older driver.  It took a bit of time to download, extract and install, but when it was done (and restarted) the flickering was gone!  This is good news because I otherwise think Windows 10 is an improvement, and didn't want to revert back   I hope this helps everyone.   Note: 1. The link above is specific to the Yoga 3 Pro.  If you are experiencing this issue and have  a different model, you may want to go to the Lenovo support and use "Detect My Product" to find the driver for your model. Select the "Display and Video Graphics" component and find the driver that references "Windows 10" specifically.2. Before trying this, I updated the bios to the latest version. I suppose it is possible that this is also required to fix the flickering (although I doubt it, since after updating the bios, the flickering continued). 

Similar Messages

  • Re: Yoga 2 Pro - Screen Flickering and Screen Blanking

    sarbin wrote:
    Moderator comment: Several posts were removed for contravening the Community Rules:
    "No vendetta posts, or online campaigning. It is acceptable to state concern for how a particular Lenovo policy, performance, or procedure does or does not meet the expectation of a particular member, but it is not acceptable to use this forum in an attempt to broadly organize or incite members en mass, to cancel orders, return systems, undertake legal action or otherwise disrupt the normal business processes of Lenovo."
    Rather than telling us what we can't do...how bout, as a mod, help by empathizing and perhaps suggesting solutions of courses of action for us.

    kbonura wrote:
    I still feel like you can offer a suggestion rather than simply sweeping in and exerting your mod authority. This is a major issue that at this point there is no real evidence of lenovo addressing. 
    Are you an owner of a yogo 2 pro? If not, then you have no idea. You can't sit back and defend lenovo by modding us or hindering any potential efforts via discussion. You can't in good concience sit back and believe this to be ok.
    Regarding paragraph 1:
    1- If I had a suggestion to offer, I would have done so.
    2- The moderation done to the thread (and the post moved here) was to apply conformance to the Guidelines.
    3- Please see: http://forums.lenovo.com/t5/Idea-Windows-based-Tablets-and/Yoga-2-Pro-Screen-Flickering-and-Screen-B...
    Regarding paragraph 2:
    1- I have a Y2P, but don't have the issue described in the thread.
    2- The moderation applied was not a defense. It was an application of the Guidelines.
    Finally, again from the Community Guidelines, please recall:
    "Extended debate with moderators or admins over their decisions with regard to moderation of posts is considered trolling."
    Please feel free to continue the discussion, on-topic and within the Guidelines, in the ongoing thread.
    Regards.
    English Community   Deutsche Community   Comunidad en Español   Русскоязычное Сообщество
    Community Resources: Participation Rules • Images in posts • Search (Advanced) • Private Messaging
    PM requests for individual support are not answered. If a post solves your issue, please mark it so.
    X1C3 Helix X220 X301 X200T T61p T60p Y3P • T520 T420 T510 T400 R400 T61 Y2P Y13
    I am not a Lenovo employee.

  • Ive tried loading this new software, and step 1 and 2 were successful, but after trying to restart the loading grey screen wont stop loading?

    ive tried loading this new software, and step 1 and 2 were successful, but after trying to restart the loading grey screen wont stop loading?

    I had a similar problem, does the phone show anything on the screen, for example "update failed, connect to computer" if it does, try opening "Sony PC Companion 2.1" click start on "support zone" then click "phone/ tablet software update" a message will pop up, press repair my phone / tablet, select your phone in the list, then follow what it says, try doing this even if the phone shows nothing, you will lose everything, all data will be gone if you follow my steps

  • Has anyone had the "equals" key in the numeric pad stop working since installing the Boot Camp 3.3 update

    Has anyone had the "equals" key in the numeric pad stop working since installing the Boot Camp 3.3 update?

    I have been an ardent user of aperture for years now and got used to the great workflow. Ever since version 1 I have been enjoying working with aperture. It is the workflow that kept me from changing.
    I got a new MacPro 12 GB ram, 4TB HDD my library mostly indexed files sits on a raided 2TB for maximum of comfort. I did this in an effort to keep me from writing the posts I writing lately. I do not have the time rally to do this but reality is something different.
    Today I am working on a job I need to finish quickly and in aperture workflow manner. So I switched to full screeeeeeeeeeeeeeeeen mode and after pressing 'H' for the HUD my screen started flickering. please look at the video I posted in my flickr account: http://www.flickr.com/photos/mawas/4719742585/
    Now this is the second time this happened in a short time after I got a new mac and upgraded to 10.6.4! After the screen had jammed up : http://gallery.me.com/masuwa/100103 I needed to hard boot my mac I am getting nervous!

  • Ecr e since installing windows 10 my Aspire R7-571-6858 will not power down via the screen,

    Since installing Windows 10 my Aspire R7-571-6858 will not shut down properly when using the screen prompt.  The monitor will power down but the keyboard remains backlit and the power light remains on.  I have to force a shut down manually via the power button.

    fdrrdl,
    Shutting a system down is a basic operating system function. You can attempt to perform a refresh of the unit to see if there might be some corrupt drivers or files installed.
    the other alternative is to go back to Windows 8, then upgrade again.

  • Since installing Windows 7 professional via bootcamp onto my 2008 24" imac i have no sound. The sound worked when i had Windows xp installed. I have tried every solution suggested on various forums. Can you please help me?

    Since installing Windows 7 professional via bootcamp onto my 2008 24" imac i have no sound. The sound worked when i had Windows xp installed. I have tried every solution suggested on various forums. Can you please help me?

    After you install Apple driver to enable the audio chip, YOU then need to manually download and install (Cirrus or Realtek audio depending on the Mac).
    Cirrus realitypod mac audio driver
    MacBook Pro '10 Cirrus Logic CS4206A (AB 11)
    Realtek Drivers

  • Since installing Windows 7 professional via bootcamp onto my 2008 24" imac i have no sound. The sound worked when i had Windows xp installed. I have tried every solution suggested on various forums. Can you please help me? Regards Eddie Johnson

    Since installing Windows 7 professional via bootcamp onto my 2008 24" imac i have no sound. The sound worked when i had Windows xp installed. I have tried every solution suggested on various forums. Can you please help me?

    Eddie,
    There is a forum specifically for Boot Camp & MS Windows users. Because that is where the Boot Camp guru's hang out I'd recommend re-posting there.

  • I have usb driver in may macbook pro 15 retina. When I installed windows 7 and try to download windows support into a CD, boot camp always said it couldn't find my usb driver.

    I have usb driver in may macbook pro 15 retina. When I installed windows 7 and try to download windows support into a CD, boot camp always said it couldn't find my usb driver. My mac version is 10.8.3

    Welcome to the Apple Support Communities
    Install the Windows support software from the USB drive. Note that Boot Camp Assistant, in OS X 10.8.3, doesn't support the option to burn the Windows support software into a disc.
    Instead, you can try a different thing. Start in Windows and download the Windows support software in it > http://support.apple.com/kb/DL1638 Then, decompress the file and run the Boot Camp drivers installer.
    If you can't access to the Internet in Windows, start in OS X and download the Windows support software from the same link. Decompress the file, right-click the folder which will show up after decompressing the file and select "Burn". Finally, start in Windows and install the Boot Camp drivers

  • How do i take snapshot since installing windows 8

    how do i take snapshot since installing windows 8

    This is a forum for Adobe Reader for Windows 8 Tablets.  For general questions regarding Windows 8, you can find answers to your question in a Windows 8 user forum or Google search.

  • Yoga 2 Pro - Screen Flickering and Screen Blanking

    Hi,
    I love the Yoga 2 Pro. But i have fews issues with it. Especially when used on battery.
    My screen flicker from time to time. The onyl fix i found was to close the lid to put the laptop to sleep and the reopen it. Not very convinient.
    An other issue I encounter is the screen blanking after a while when the computer is not in use. It's like the computer blank the screen to save battery power, but when you want to reuse it again, it won't start again. THe only fix is to hard reset the computer (eg : press 10s the power button)
    I am running a fresh clean install of Windows 8.1 Pro with all the Lenovo Drivers up to date (exept the BIOS one)
    If you could help me fix my issues. I think it's software related.
    Do you think i should put the BIOS update ? Does anybody ever try with a clean windows 8.1 install ?
    Thanks a lot,
    Romain

    I have the same issue, only it occurs at low brightness.
    It flickers rapidly for a few seconds and goes away. It occasionally comes back, making it unable to work in darker environments with the rapid flickers.
    I've checked all the auto-brightness and intel power saving options. I tried using both refresh rates, and they don't make a difference. The problem occurs in all power plans and even in the non-Lenovo energy manger modes. All drivers and BIOS are up to date.
    I'm at a complete loss as to why this is happening...I would greatly appreciate a solution. I sincerely hope I don't have a defective laptop..):

  • How do I get my Iphone 4S screen to stop flickering and jumping?

    My 15 month old Iphone 4S's screen has recently starting jumping and flickering and will not stop.
    First began in my camera but would stop when I turned the camera to the front to see my face, then when switched back to the other side it would begin jumping again, (roughly a month ago). Then it started happening in any apps that involved my camera, snapchat, instagram, etc. today.
    Now, my screen always flickers and jumps in all apps and when on my home and lock screen.
    IOS is up to date.
    No cracks on screen.
    Continues to do so even after resetting and restoring iphone, and changing my brightness up and down.
    Background moving is turned off.
    Flickering is worse at the bottom of the screen.
    Screen was replaced six months ago.

    Sorry I can't help but I literally just posted the exact same thing on this website my 4s screen on camera flickers and jumps and in snapchat and slo pro ( slo motion camera ) will this turn to the home screen aswell I've already had a problem with the screen once !!

  • Yoga 2 Pro - Screen not rotating on new Windows 8.1 install

    I got my new Yoga 2 Pro last week and the screen rotation worked properly.
    I decided to wipe the partitions and install my own version of Windows 8.1.
    Since then the screen rotation doesn't work. The screen rotation button doesn't do anything and I don't have the 'Enable auto-rotate' checkbox in the resolution screen
    In my device manager I have an error on 'HID Sensor collection' saying "This decice cannot start" (Code 10). Failed to initialize sensor from HID collection descriptor". I am not sure if this is related.
    Can anyone help me?
    Thank you
    Solved!
    Go to Solution.

    I was able to fix my problem and would like to share the solution with others in case this also happens to you.
    I basically installed this Media package (http://www.microsoft.com/en-us/download/details.aspx?id=42503) and after that the auto-rotate check, button and functions works properly.
    Hope this can also helps others.

  • Yoga 2 Pro Webcam suddenly stopped working....(not a hardware problem!)

    Hi everyone,
    I've had the yoga 2 pro for about a year now - took a little bit of fiddling to get it working just right (clean OEM win 8.1 install and installing drivers in the right order etc) but I had it working just perfect then....
    About a week ago the webcam stopped working during a skype call. I tried reinstalling the drivers etc and messed around for 2 days trying to get it working again. The LED light comes on when it's engaged and it says it's present and working in device manager but I get no picture on skype or any other program.
    I reinstalled windows 8.1 from scratch in the hope that this would solve it but same issue.
    So I assumed it was a hardware fault and thought stuff it!
    But then last night I installed Windows 7 32 bit on VMWare to run some of the older 32 bit programs and the webcam works perfectly within this virtual OS!! So it doesn't seem to be a hardware problem after all.
    I've tried everything - installing the bison & Liteon drivers from the Lenovo website, installing the generic win 8 drivers etc but NOTHING WORKS!!
    Can  you help? I just want to get this thing working again!!
    THANKS!

    Unfortunately I've reinstalled the driver after uninstalling it from the device manager 10 times. I also formatted and reinstalled, but that didn't fix anything.
    The camera works for the camera app + the webcam test online. I've tried rollback on the drivers, and installing earlier versions of skype with no luck.
    Very strange, all it does is show the loading sign, and never loads. 
    This is the desktop version of skype btw. I'm going to try it with the non-dekstop version tonight and see if it works. 
    EDIT: Is there any other camera source besides 'Lenovo EasyCamera'? Their are two drivers on the drivers page, which one is recommended?

  • Yoga 2 Pro BIOS UI corrupted after clean install Win 8.1 Pro

    Hi all.
    First of all sorry for my bad English.
    And here is my problem:
    I just bought a new laptop "Yoga 2 Pro". Because I have a legal copy of Windows 8.1 Pro I decided to reinstall the system. Before re installing BIOS UI looked normal but after re installation of the operating system BIOS UI looks strange and can not use it. You can see it on the attached photos. I tried to reinstall the system a few times but immediately after installation BIOS UI looked like in the pictures. Interesting that after removing system from SSD, BIOS UI is starting to look normal and is fully functional. I even tried different versions of the operating system because I thought that the cause lies with the ISO file. The effect has always been the same.
    Does anyone have any idea what might be causing this problem?
    I will be grateful for any suggestions.

    I did try removig the Lenovo energy management software, but that didn't work. I also then reinstalled and tried setting it to Performance mode. However, I didn't look for a Windows power mgmt solution.
    What's weird is that after I powered down and used the Novo button to check the BIOS version (just to confirm what I said earlier), when I restarted Windows again I did not see the Hyper-V error message. I haven't restarted again, but will check again tomorrow morning when Windows starts again.

  • My MacBook Pro just turned itself off while installing Windows 7. It has now got a black screen with a white flashing bar in the top left corner...what can I do?

    I was just installing windows 7 onto my MacBook Pro. I selected to have 200GB for Windows and the rest leave for Mac.
    I clicked install and the bar filled up as it should do. However, once the install had completed, my MacBook turned itself off. I assumed this was normal. Now, my MacBook has a black screen with a white flashing underscore in the top left corner.
    What is wrong and what should I do?

    Hold down the Option key when starting up then on the sceen that comes up select Mac OS X to boot from.
    The Win 7 install didn't go well and is hung in some way. You should use boot camp assistant to remove the win partition and start over.
    Make sure you are using a Retail version of Win 7. A Branded OEM version, like ones from Dell and HP, will NOT work to install Windows 7 on your Mac.

Maybe you are looking for