Yoga 3 Settings.exe version 2.4.0.24471 stopped
When starting the settings app, it just freezes and shuts down. Here is what I have from the event log:
The program Settings.exe version 2.4.0.24471 stopped interacting with Windows and was closed. To see if more information about the problem is available, check the problem history in the Action Center control panel.
Process ID: 208c
Start Time: 01d07c5a7069dd3c
Termination Time: 15
Application Path: C:\Program Files\WindowsApps\LenovoCorporation.LenovoSettings_2.4.0.24471_x86__4642shxvsv8s2\Settings.exe
Report Id: bb90150a-e84d-11e4-8280-1008b1e45b0a
Faulting package full name: LenovoCorporation.LenovoSettings_2.4.0.24471_x86__4642shxvsv8s2
Faulting package-relative application ID: App
Anyone have any idea how to fix this? Brand new Yoga 3, updates and wht not has been done.
Dear Filenest
Welcome in lenovo community
Have you tried to make Refresh My PC ?
Thanks
Alaa
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!
Similar Messages
-
in windows server 2008 r2 running shany ip surveillance
when i want to playback from record file windows encounter error:The program shany ip surrvilance Playback.exe version 4.0.7.3 stopped interacting with
Windows and was closedHi Koosha,
You should ask this question on
Windows Forums.
Thanks!
If this answers your question please mark as answer. If this post is helpful, please vote as helpful by clicking the upward arrow mark next to my reply. -
I have an end user whose Outlook 2007 is spontaneously closing. It will enter a 'not responding' state and then shut down (and sometimes relaunch). In going through the event log the following information was obtained. O/S is Win-7, 64-Bit. Any input greatly
appreciated.
The program OUTLOOK.EXE version 12.0.6668.5000 stopped interacting with Windows and was closed. To see if more information about the problem is available, check the problem history in the Action Center control panel.
Process ID: 14ac
Start Time: 01cf6af126c3ad83
Termination Time: 79
Application Path: C:\Program Files (x86)\Microsoft Office\Office12\OUTLOOK.EXE
Report Id: c7d7556f-d9dd-11e3-a17c-2cd05a89d710
And further into the Event Log (Application)
- System
- Provider
[ Name] Application Hang
- EventID 1002
[ Qualifiers] 0
Level 2
Task 101
Keywords 0x80000000000000
- TimeCreated
[ SystemTime] 2014-05-12T14:03:22.000000000Z
EventRecordID 26088
Channel Application
Computer uswal-3PLSJX1.amer.thermo.com
Security
- EventData
OUTLOOK.EXE
12.0.6668.5000
14ac
01cf6af126c3ad83
79
C:\Program Files (x86)\Microsoft Office\Office12\OUTLOOK.EXE
c7d7556f-d9dd-11e3-a17c-2cd05a89d710
55006E006B006E006F0077006E0000000000
Binary data:
In Words
0000: 006E0055 006E006B 0077006F 0000006E
0008: 0000
In Bytes
0000: 55 00 6E 00 6B 00 6E 00 U.n.k.n.
0008: 6F 00 77 00 6E 00 00 00 o.w.n...
0010: 00 00 ..Hi,
The event log in your posting is a general error event which occurs when application stops responding. Please make sure the latest patches and service packs are installed for your Outlook 2007.
Please also restart Outlook in safe mode(Start > Run, type Outlook /safe and Enter) to check whether Outlook 2007 is still not responding or not.
Thanks,
Winnie Liang
TechNet Community Support -
Please see the question and provide your views on possible remedies.
Hi,
Since the issue can always be caused by incompatible shell extension or driver conflict.
We can first use shellexView to disable non-Microsoft related extensions of Windows Explorer to see what’s going on:
1. Download ShellExView v1.41 from the following link
http://www.nirsoft.net/utils/shexview.zip
Please Note: The third-party product discussed here is manufactured by a company that is independent of Microsoft. We make no warranty, implied or otherwise,
regarding this product's performance or reliability.
2. Extract "shexview.zip" file and open shexview.exe. It will scan the registry for all the shell extensions.
3. Select all the non-Microsoft extensions in pink by press "Ctrl" in the keyboard.
4. Click the "Disable Selected Items" on the toolbar and click Yes.
5. Restart your computer and check if the issue is resolved.
If the issue persists, then test the issue in Clean Boot and Safe Mode, and let me know the results.
Meanwhile, please configure Windows to create user-mode dumps. Create a System Restore Point first.
If you copy and paste the following in Notepad and save as a .reg file, then right-click the .reg file and select "Merge" to add to the registry, a .dmp file at the time explorer.exe crashes should be created in the C:\CrashDumps folder:
Windows Registry Editor Version 5.00
[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps\explorer.exe]
"DumpFolder"=hex(2):43,00,3a,00,5c,00,43,00,72,00,61,00,73,00,68,00,44,00,75,\
00,6d,00,70,00,73,00,00,00
After Explorer (explorer.exe) crashes, can you then make the .dmp file available (provide link) via Windows Live SkyDrive or similar site?
Kate Li
TechNet Community Support -
Application Hang; id 1002 livecomm.exe version 17.5.9879.20671
The program livecomm.exe version 17.5.9879.20671 stopped interacting with Windows and was closed. To see if more information about the problem is available, check the problem history in the Security and Maintenance control panel.
Process ID: 5c4
Start Time: 01d0119635dc0556
Termination Time: 4294967295
Application Path: C:\Program Files\WindowsApps\microsoft.windowscommunicationsapps_17.5.9879.20671_x86__8wekyb3d8bbwe\livecomm.exe
Report Id: 359d474d-7d8b-11e4-80ed-f07d686cb985
Faulting package full name: microsoft.windowscommunicationsapps_17.5.9879.20671_x86__8wekyb3d8bbwe
Faulting package-relative application ID: ppleae38af2e007f4358a809ac99a64a67c1
<dir></dir>
Windows 8.1 Pro 32-Bit Media Center ASUS P5G41T-M LE Ram 4GBAre you running any of the "Windows essentials: programs? Live writer? Live mail or anything else?
Cheers and regards,
• » νιנαソѕαяα∂нι ѕαмανє∂αм ™ « •
●๋•کáŕádhí'ک díáŕý ツ
I am a volunteer here. I don't work for Lenovo -
Hi,
I am using Web Premium CS 5.5 in which the Flash professional module crashes frequently with following event logs description
Faulting application Flash.exe, version 11.5.1.349, faulting module unknown, version 0.0.0.0, fault address 0x13eadfb0
Faulting application Flash.exe, version 11.5.1.349, faulting module ntdll.dll, version 5.1.2600.6055, fault address 0x0004487f
Faulting application Flash.exe, version 11.5.1.349, faulting module unknown, version 0.0.0.0, fault address 0x13e32258
Hanging application Flash.exe, version 11.5.1.349, hang module hungapp, version 0.0.0.0, hang address 0x000000000
The operating System is Windows XP. Clean installed after the errors. but still facing same problem. Also installed the patch Adobe Flash Professional CS5.5 Update 11.5.1
Please help me with the solution to this problem
Thanks & Regards,
Santosh ManjrekarHello, I have exacly the same problem and when I delete de folder "Adobe" on the "user profile/local settings/application data/" the aplication runs 2 times more and then the problem reapears, if you do this action again it will work again 2 times.
I hope that adobe gives a resolution to this problem.
Best regards
Fernando Jorge -
Log Name: Application
Source: Application Error
Date: 2/26/2014 2:16:26 PM
Event ID: 1000
Task Category: (100)
Level: Error
Keywords: Classic
User: N/A
Computer: SuperFlyXPS
Description:
Faulting application name: msn.exe, version: 10.50.19.1000, time stamp: 0x51ddb7de
Faulting module name: MSHTML.dll, version: 11.0.9600.16518, time stamp: 0x52f365cb
Exception code: 0xc0000005
Fault offset: 0x00175363
Faulting process id: 0x1260
Faulting application start time: 0x01cf32a011d4aeb4
Faulting application path: C:\Program Files (x86)\MSN\MSNCoreFiles\msn.exe
Faulting module path: C:\Windows\system32\MSHTML.dll
Report Id: a1704306-9f33-11e3-acde-782bcbac25e5
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Application Error" />
<EventID Qualifiers="0">1000</EventID>
<Level>2</Level>
<Task>100</Task>
<Keywords>0x80000000000000</Keywords>
<TimeCreated SystemTime="2014-02-26T22:16:26.000000000Z" />
<EventRecordID>80997</EventRecordID>
<Channel>Application</Channel>
<Computer>SuperFlyXPS</Computer>
<Security />
</System>
<EventData>
<Data>msn.exe</Data>
<Data>10.50.19.1000</Data>
<Data>51ddb7de</Data>
<Data>MSHTML.dll</Data>
<Data>11.0.9600.16518</Data>
<Data>52f365cb</Data>
<Data>c0000005</Data>
<Data>00175363</Data>
<Data>1260</Data>
<Data>01cf32a011d4aeb4</Data>
<Data>C:\Program Files (x86)\MSN\MSNCoreFiles\msn.exe</Data>
<Data>C:\Windows\system32\MSHTML.dll</Data>
<Data>a1704306-9f33-11e3-acde-782bcbac25e5</Data>
</EventData>
</Event>
need help with . . .Hi,
I found a useful link:
MSN has encountered a problem needs to close or MSN is not responding Error
https://answers.msn.com/solution.aspx?solutionid=11abae39-d906-4113-bb4e-ecfaa81798f0
Please take a look of this part
(Common Faulty Module on MSN
Mshtml.dll)
*Instead of MSN, here is a another software called Skype, just instroduce it to you, hope you can enjoy it.*
Yolanda Zhu
TechNet Community Support -
.exe version issues HELP
I've just finished projects with a bit of animation and some
branching that I facilitated with additional buttons and
duplication. Published for the web it works perfectly. My
instructor (I am a student with a co op in elearning) has asked for
an .exe version to present, and I'm having issues with that. Some
animation is freezing ( made with FLASHCS3 but just simple things
w/little AS3),in addition, the problem that some animation slides
with buttons are proceeding on their own. The navigation I added to
my "review" slides with buttons aren't pausing the animated slides
at all. Most difficult is that the issues vary ( so I can't just
alter certain slides)The branching elements are fussy,too...
sometimes the buttons stick, sometimes the branching is ignored and
a slide plays the next duplicate slide when it shouldn't (it should
branch to a designated slide). The other format works perfectly.
HELP I need a quick fix...I have a fast computer with enough
memory, good graphics card, updated drivers, and updated adobe and
microsoft everything...running vista sp1---So I know It must be
me...How can I get this in shape to run ASAP?
regards,
susanne> I've just finished projects with a bit of animation and
some branching
> that I
> facilitated with additional buttons and duplication.
Published for the web
> it
> works perfectly. My instructor (I am a student with a co
op in elearning)
> has
> asked for an .exe version to present, and I'm having
issues with that.
> Some
> animation is freezing ( made with FLASHCS3 but just
simple things
> w/little
> AS3),in addition, the problem that some animation slides
with buttons are
> proceeding on their own. The navigation I added to my
"review" slides with
> buttons aren't pausing the animated slides at all. Most
difficult is that
> the
> issues vary ( so I can't just alter certain slides)The
branching elements
> are
> fussy,too... sometimes the buttons stick, sometimes the
branching is
> ignored
> and a slide plays the next duplicate slide when it
shouldn't (it should
> branch
> to a designated slide). The other format works
perfectly. HELP I need a
> quick
> fix...
First thing I'd do is take out anything that uses AS3.
Captivate 3 doesn't
understand it ... and who knows, maybe that's messing
everything up for you.
Typical troubleshooting here would be to strip out anything
remotely
'exotic' and publish. If that works, keep adding things back
in until
something breaks.
The easiest way you could approach this might be to
copy/paste your current
project into a new one, one slide at a time, publishing and
testing between
slides. Once you know what bits break your published file it
will be easier
to figure out what needs to be fixed.
HTH
Steve
http://twitter.com/Stevehoward999
Adobe Community Expert: eLearning, Mobile and Devices
European eLearning Summit - EeLS
Adobe-sponsored eLearning conference.
http://www.elearningsummit.eu -
Nome evento problema: APPCRASH
Nome applicazione: iTunes.exe
Versione applicazione: 11.1.4.62
Timestamp applicazione: 52ddbf7a
Nome modulo con errori: StackHash_1025
Versione modulo con errori: 6.0.6002.18881
Timestamp modulo con errori: 51da3e27
Codice eccezione: c0000374
Offset eccezione: 000b06fc
Versione SO: 6.0.6002.2.2.0.256.6
ID impostazioni locali: 1040
Informazioni aggiuntive 1: 1025
Ulteriori informazioni 2: 491df5c84464b99ef8f61e542b4c9ce4
Ulteriori informazioni 3: 9ade
Ulteriori informazioni 4: 7f7b00bf8397fb6909813f504d7de648Nome evento problema:
APPCRASH
Nome applicazione:
Adobe Premiere Pro.exe
Versione applicazione:
5.0.3.0
Timestamp applicazione:
4ce382d1
Nome modulo con errori:
StackHash_8659
Versione modulo con errori:
6.1.7601.18247
Timestamp modulo con errori:
521eaf24
Codice eccezione:
c0000374
Offset eccezione:
00000000000c4102
Versione SO:
6.1.7601.2.1.0.256.48
ID impostazioni locali:
1040
Informazioni aggiuntive 1:
8659
Ulteriori informazioni 2:
865914f2b0aba0a7f763eb3f160d9c9b
Ulteriori informazioni 3:
5def
Ulteriori informazioni 4:
5defc8630ba14d9bda1ae72188ae0e03@
E' da quando ho istallato il plug-in Heroglift della Pro-Dad
Fino ad ora con istallati: Magic Bullet, New Blue, ProDad Vitascene e Boris non mi aveva dato eccessivi problemi.
Qualcuno ha avuto la stessa triste esperienza? Grazie e spero qualcuno possa aiutarmi -
Hi,
I have Photoshop CS2 9.0 version installed on my PC with patch 9.02. I have a VB application which runs certain action files on EPS/TIF images using Photoshop typelibrary.tlb.The issue is that the VB application hangs when Photoshop crashes with the following error:
"Faulting application Photoshop.exe, version 9.0.2.0, faulting module ntdll.dll, version 5.2.3790.4455, fault address 0x0001bd02"
I also get several other errors when i call Photoshop in my VB application. Those are as mentioned below:
1. The referenced memory could not be read.
2. The remote server machine does not exist or not available.
There is no particular pattern for above mentioned errors. I could not find any help in any of the forums.
I have attached the screenshot of these errors.
Pls advice.
Thanks in advance,
Shobha PatilI to have been getting this error, randomly when I exit the program. Not sure what to make of it google has come up empty for me.
-
Project "Installer Build Product version" vs exe version
Hi,
Can someone help me understand why the "Installer Build" in a project has a "product version", which later shows up in the Windows add/remove programs?
I must be missing something because to me it seems very strange that what they call "product version" in the installer is not automatically linked to the compiled exe version that the installer is built for?
Now I have to try and remember to manually keep these two versions synchronized, and the build 'product version' doesn't even have the same number of fields as the exe version information?!
It's strange when my program splash screen shows "V1.2.0.8" (read by the app by inspecting its own exe) but in the windows add/remove programs, it could say something totally different, such as 1.0.6...
Why is it like this?? How do other people use/handle these various version numbers? -is there a way for my app exe to find what the installed "product version" is?
---Confused...
-QFang
QFang
CLD LabVIEW 7.1 to 2013QFang wrote:
I suppose it helps explain.. Perhaps I just need to think differently about how to name our installers.. Divorce the installer name from the (main) application name, then the difference in version numbers wouldn't be confusing.
Ideally the NI builder would be flexible enough that you could have a "Company Name" as the "installer name" and you could add/remove/maintain the whole company's product list with that same installer, similar to the NI installer.. sounds like a lot of work though.
Thanks for replying!
It does sound like a ton of work! I have to belive it is feasable with TKs like VIPM and Deploy on the market. (A few others I am less familliar with come to mind as well) Niether is exactly what you seem to want but demo that the tech is there!
Jeff -
Faulting application SAP Business One.exe, version 8.80.233.0
Daily the following event id 1000, application error is logged in on my SAP server.
Faulting application SAP Business One.exe, version 8.80.233.0, time stamp 0x4c9ba79d, faulting module ole32.dll, version 6.0.6002.18277, time stamp 0x4c28d53e, exception code 0xc0000005, fault offset 0x00047336, process id 0x6184, application start time 0x01cbe5257b807570.
My server is unexpectedly restarts, i am not sure whether it is due to this error.
Can anyone explain me why this error message is logged, and what is the exact reason for this.
SAP version = SAP 8.8 with patch level 15
SQL Server = MS SQL Server 2005
OS = Windows Server 2008 Enterprise EditionYou may check this: Re: CustomerLibrary - Error during AddOn installation
Thanks,
Gordon -
Hello,
I am modifying an existing report to inlcude a stored procedure. The existing report access several tables, link and formulate the fields. I added the new stored procedure, link it with one of existing tables included in the report, and add a new group summation using the new field returned by stored procedure. When I run the report with the new changes, the Crystal Report seems processing data for a while (as the SQL profiler shows the stored procedure was executed successfully), then it suddenly crashed. The complete error message in the event log is "Faulting application crw32.exe, version 11.0.0.895, faulting module crqe.dll, version 11.0.0.1282, fault address 0x000a4d5c".
Platform informatin:
- Crystal Report XI version 11.0.0.895
- SQL 2005
- Windows 2003 Server
Any help to narrow down the issue would be highly appreciated.
MichaelHi Michael,
You are running the base build of crysral report XIR1 would suggest you to apply the latest service pack for crystal reports XIR1.
Servcie pack can be downloaded from here.
[https://websmp230.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/bobj_download/main.htm]
You can also upgrade CR XI RI to R2.
See this thread for upgradation:
[Crystal Report XI Upgrade Question;
Regards,
Shweta -
We have a customer that has been receiving the following error for the last 6 to 8 weeks (about once or twice a week) while running our application:
Faulting application java.exe, version 0.0.0.0, faulting module jvm.dll, version 0.0.0.0, fault address 0x000449f7
Our application is running on Java 1.4.2_04-b05 and uses Tomcat 4.1.30 (or thereabouts). The OS is Windows 2003 Server. We have many other customers running the application on the same version of Java and Tomcat on a variety of OS versions, but have not seen this problem before.
We have replaced the java .exe's and .dll's to make sure one had not been corrupted, but to no avail.
There is another similar thread that has no resolution already out there:
http://forum.java.sun.com/thread.jspa?messageID=9961112
but I wanted to put some Duke dollars on this post, so I posted it separately.
If anyone has seen this problem and found some way around it (no matter how severe the remedy) please respond.
Thanks.do you see any core/dump files??
-
All,
My application is running in a Tomcat, JBoss environment. Occassionally Tomcat crashes in jvm.
The error is:
Faulting application tomcat.exe, version 1.1.0.0, faulting module jvm.dll, version 0.0.0.0, fault address 0x0015405e.
The OS is Windows Server 2003.
JRE is 1.4.2_03
Has anyone seen this? I saw a thread where a number of people had this problem but no solution was posted.
Is there any fix available?
Any help would be greatly appreciated.
Sudhir1.4.2_03 is very old at this point. 1.4.2_17, the latest release has many, many, many fixes. Moving to this latest release may solve this problem:
http://java.sun.com/j2se/1.4.2/download.html
-Rogerr
Maybe you are looking for
-
Sony SDHC card will not load video on Mac
Ok I have a new Sony SDHC card with video from a panasonic camera. On import it is not loading video and is just spinning on the SD import option of the window.
-
JNDI lookup for request scope component,
Hi, I have 2 web applications part of single ear file. Where One application is ATG application having ATG pipeline defined in its web.xml and 2nd one is a simple j2ee web application. From 2nd application if I try to lookup a request scoped componen
-
Hi I have created a process template for candidate selection. The template was assigned to the candidate through requisition. So far ok. The activity types available in the template do I need to assign to the candidate for each of process (like Appl
-
Just downloaded latest Ipod software and Ipod Touch no longer plays through my speaker dock or FM transmitter in the car. The dock is powered and I can hear the music through the Ipod's own speaker - haven't tried it with headphones. Can anyone help?
-
Do not get your Engraving done at MacMall!
I wish I had known the type of engraving MacMall offered ahead of time. I had my iPad 2 engraved by them and I'm very disgusted at the results. I should've purchased and engraved my iPad 2 at the Apple Store instead. I will never buy from MacMall aga