Yoga display turns off after 1 minute

I'm having an annoying problem with my new Yoga related to the display and have not seen any other posts with a similar complaint so perhaps this is a simple fix that I'm just not able to sort out on my own. My display turns off after 1 minute of inactivity. The only means for changing behavior like this that I am aware of is through the Control Panel Power Options. My settings for "turn off the display" are 10 minutes on battery and Never while plugged in (note screen shot attached). Regardless of my settings, the screen turns off after 1 minute. I've changed the settings to multiple configurations and restarted with no change in behavior. Perhaps there's some other settings area, maybe something specific to Lenovo that I'm not aware of (since this is my first Lenovo laptop). Anyone with similar problems or insight?

This may be a Windows 8 issue. I finally fixed this problem by identifying the screen saver as the issue (and I wasn't using a screen saver). Type "lock the computer" into the search box after clicking the search charm, which brings up the screen saver dialog box. Mine was set to 1 minute, though I'd never set it myself. If you can't change it, choose a screen saver and you should be able to do so (and can then switch back to no screen saver). BUT, here's the problem. Other things you install (or settings within things you install) can apparently change and override whatever you type in for the delay time. Try applying your new time and exiting from the dialog box, then open it back up again. I was finding that it kept going back to 1 minute. To reset things so that you can get control again, type "user accounts" into the search box and when the dialog box comes up, choose "Reset Security Policies". Then you can go back to the screen saver dialog and successfully change the delay time. See http://social.technet.microsoft.com/Forums/windows/en-us/ace4085a-b0ba-4a98-898d-cd92d9e88e13/window... for some detail.

Similar Messages

  • T42 Display turns off after moving

    Hello everybody!
    I´ve got a problem with my Thinkpad T42 (2373fwg), XP prof. with the latest updates running. After installing the latest drivers for display (ati) and for "ThinkVantage Active Protection System " the display turns off immediately after moving the Thinkpad. I can turn the display on again only by reboot. The error appears even in a second after reboot, so it doesn´t concern to windows. The system doesn´t crash, it´s only the display. The problem might concern to the shock sensor, but I don´t know how to solve it.
    Does anyone of you has an idea?
    Thank you and kind regards
    Bill
    Message Edited by billyflinn on 01-26-2009 09:29 AM

    I have a similar problem: T42 (2373-5wg) Screen blanks. At first screen blanking was rare and seemed to happen when moving the pc, but now the screen blanks within 1-3 minutes after turning on the laptop, even if the computer is left untouched after being turned on.
    It is not OS related as the blanking appears even when in BIOS setup or booted on a liveOS CD.
    I can't tell for sure if the system crashes or not as the display goes blank (doh!), however, I have seen no reports of registered crashes in the visible part of the boot process.
    The screen blanking appears quicker (or even instantly) if the computer is warm (e.g. turned off just before being turned on).
    Blanking appears simultaneously on the LCD and on any attached external monitor, so I believe this rules out a defective LCD, backlight or inverter board.
    I'm thinking it's a failing graphics adapter or system board, or maybe a loose connection that causes a component to overheat and fail. But I don't know which or how to fix it.
    It IS out of warranty, of course. Any ideas?
    Thanks in advance,
    Niels
    EDIT: It seems this could be yet another case of badly soldered BGA chips that seems to be troubling the T4x series:
    http://forum.thinkpads.com/viewtopic.php?f=2&t=33952&sid=99545e4d13d9a94ce7496a5022690ed8&start=30
    http://www.technotaste.com/blog/thinkpad-t42-ati-radeon-9600-driver-and-the-blue-screen-of-death-bso...
    Message Edited by NielsCN on 01-26-2009 12:11 PM
    Message Edited by NielsCN on 01-26-2009 02:25 PM

  • Display Turns Off After Opening Computer

    I have a very annoying problem of my display turning off and not turning on until I restart my Macbook Pro by holding down the power button.
    For example, I will close my computer (power cord not plugged in) and it will go to sleep. If for some reason the computer turns on while it is still closed (this happens when I pick it up/move it around sometimes) and I then open the computer, the display will be on momentarily and then turn off leaving me with a black screen. The only way to turn the display on again is to restart my computer.
    Another example: I might close the computer with the power cord in. I will then unplug the computer (still closed) and walk somewhere, then open the computer. The display will be on for a few seconds and then turn off, leaving me again to restart my computer.
    The third example is the worst. Sometimes with the power cord still in, sometimes with no power cord, the display will just be blank when I open the computer.
    With all of the above occurrences, I know the computer is running because I can see the caps lock key light change when I press it.
    Does this make any sense? Please help me, I will be going to college on Tuesday and I would really like to have it so I don't have to restart my computer every time before class.
    My display was not always this way, it has just been like this for a few months.

    Im surfing this kinda of problemes. Its insteresting your computer turn on the screen after restart, but there no much good news for us in here: http://discussions.apple.com/thread.jspa?threadID=1478474&tstart=0

  • Satellite P850 display turns off after only minute or two of inactivity

    Hi,
    I have my Display settings set to turn off display after 1 hour when on power and 10 minutes when on battery.
    I have a screen saver set up to go on after 10 minutes.
    However, my display often (but not always) turns itself off after only a minute or two of inactivity.
    Can anyone explain this weird behavior?
    It starts up immediately I move the mouse but I just don't like things happening that I haven't scheduled.
    Thanks.
    Hoges

    Hi
    Could it be possible that you changed the settings in the power profile which is not in use?
    I mean in case another application like ECO Utility would control the display brightness, the changes in Windows power plant would be useless.
    Toshiba ECO Utility for example contains some settings like dim display after
    I think you should check this utility

  • Air Display Turns Off After 10-15 mins - Why? What's the fix?

    I recently upgraded to OSX10.8 on my early 2012 mac mini. I have been using AirDisplay as my screen.
    I've run into an problem. The AirDisplay prefpane now turns itself off after 10-15 mins if its not being used. It also doesn`t activate on reboot.
    This is obviously a problem as I don‘t have a monitor.
    I started to use logmein instead, but its not ideal as its mouse isn’t quite as usable (it works in the current release after many months of bugs and patchy performance).
    I've been going back and forth with Avatron for a few weeks (they've been very supportive), and they proposed two solutions:
    Uninstall / reinstall using a newly downloaded package
    Delete the hidden com.avatron preference files
    Neither has worked.
    I also made a rather pathetic to write an applescript to select the menu app item "Turn Air Display On" , but I didn't really know what I was doing (here's my poor effort below). As I didn‘t get this working when the menu option was available, I didn’t proceed.
    tell application "System Events"
         set UI_Enabled to UI elements enabled
              tell application process "AirDisplayStatusItem"
              entire contents
                   tell menu bar 1
                        tell menu bar item 1
                             click menu item "Turn Air Display On"
                        end tell
                   end tell
         end tell
    end tell
    get entire contents of application process "AirDisplayStatusItem" returns
    --> {menu bar 1 of application process "AirDisplayStatusItem", menu bar item 1 of menu bar 1 of application process "AirDisplayStatusItem"}
    Result:
    error "System Events got an error: Can’t get menu item \"Turn Air Display On\" of menu bar 1 of application process \"AirDisplayStatusItem\"." number -1728 from menu item "Turn Air Display On" of menu bar 1 of application process "AirDisplayStatusItem
    Has anyone any ideas on how to resolve this?
    FAS

    This may be a Windows 8 issue. I finally fixed this problem by identifying the screen saver as the issue (and I wasn't using a screen saver). Type "lock the computer" into the search box after clicking the search charm, which brings up the screen saver dialog box. Mine was set to 1 minute, though I'd never set it myself. If you can't change it, choose a screen saver and you should be able to do so (and can then switch back to no screen saver). BUT, here's the problem. Other things you install (or settings within things you install) can apparently change and override whatever you type in for the delay time. Try applying your new time and exiting from the dialog box, then open it back up again. I was finding that it kept going back to 1 minute. To reset things so that you can get control again, type "user accounts" into the search box and when the dialog box comes up, choose "Reset Security Policies". Then you can go back to the screen saver dialog and successfully change the delay time. See http://social.technet.microsoft.com/Forums/windows/en-us/ace4085a-b0ba-4a98-898d-cd92d9e88e13/window... for some detail.

  • Display turns off after opening MacBook

    This morning when I opened my Macbook, the screen came on to the password login, but not even three seconds later turned off. I closed it and opened it again and it did the same. I have tried restarting the computer multiple times, but nothing has worked. I was just using my Mac nit even 12 hours before and it was working fine.
    I have a 2008 MacBook and run Snow Leopard.

    Im surfing this kinda of problemes. Its insteresting your computer turn on the screen after restart, but there no much good news for us in here: http://discussions.apple.com/thread.jspa?threadID=1478474&tstart=0

  • Can not turn on the monitor on Satellite after dispaly turns off after 10min

    hi..
    I have a problem with my laptop..
    when the display turns off after 10 minutes , it doesn't turn on again !!
    i move the mouse, trying to type on the keyboard, but it doesn't work..
    to turn the display on again i should close the lid to hibernate and open it again!!
    i hope that you will help me @_@ !

    Hello
    Check please http://support.microsoft.com/kb/917332/en-us
    To correct the behavior please download and apply the patch (KB917332) which could be found in the detailed resolution below. I hope it will help.

  • Yoga 13 display does not Turn off after idle

    I have the computer set to the balanced power option, and the disaplay is set to turn off after 5 minutes on battery and 10 minutes when plugged in. Unfortunately the screen never turns off.
    Anyone know how to fix this problem ?

    hi tmpst,
    Welcome to the Lenovo Forums.
    If a wireless device (mouse, keyboard, etc.) is plugged to the computer, the display, screen saver or sleep function might not work. If this is your case, try to:
    1. Remove your wireless device (might include a usb dongle)
    2. Apply the Moving mouse causes laptop to exit sleep mode fix
    If you have Power DVD installed, apply http://support.microsoft.com/kb/913405
    Let me know your findings.
    Cheers.
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
    Follow @LenovoForums on Twitter!

  • My screen darkens after 1 minute and turns off after 3.  All of a sudden, now, after the screen shuts down, it comes right back on????

    My screen darkens after 1 minute and then turn off after 3 minutes (energy saver).  Now, all of a sudden, after it shuts down it comes right on???

    thank you so much sir... i am very thank ful to u... it was an breath taking moment ... i was almost dead as it didnt work

  • Screen turns off after a few minutes and needs to be closed then opened

    hi, as the title suggests my powerbook screen turns off after a few minutes before my screensaver is set to come on and when i come back and press a key or move the pad it wont start up so i need to close the powerbook then open it up again for it to activate. its not a huge problem but my programs which connect to the internet seem to lose their connection when i open it up again. is this normal? is there a setting i can change?
    thanks
    ross

    Is there a way to "disable" Standby, Suspend and Off just when watching movies (in fullscreen or not)? I want them to do what they usually do in all other cases.
    Setting them to 0 in xorg.conf does the thing, but I need that functionality only when I'm wathing movies. Making a script that alters adjustments in xorg.conf isn't the best solution - you'd have to restart X every time you want to watch a movie .
    Cheers,
    Daniel

  • L305D-S5935 Unresponsive After Display Turns Off

    I have a L305D-S5935 running Windows Vista and it becomes unresponsive after the display turns off as set to do so in the power settings.  I cannot push any key or button or move around on the mouse pad to get it to turn back on.  This is very frustrating and the only way to get it to come back on is to to a hard restart.

    Turn off your laptop, unplug all wires, remove the battery, and hold the power button for thirty seconds. Afterwards, reattach the battery and connections.
    Then reinstall TVAP.
    Toshiba Value Added Package for Windows Vista/7 (32)(v1.2.33; 11-09-2009; 43.67M)
    - Peter

  • My ipod only goes to the apple screen and freezes then turns off after about a minute. Is this fixable?

    My ipod only goes to the apple screen and freezes then turns off after about a minute. Is this fixable?

    Try a system reset.  It's quick, easy and harmless...
    Hold down the on/off switch and the Home button simultaneously until the screen blacks out or you see the Apple logo.  Ignore the "Slide to power off" text if it appears.  You will not lose any apps, data, music, movies, settings, etc.

  • Two Problems:MSN Won't Download,  Display Shuts Off After 1 Minute

    Hi ok so i have two problems, I had MSN 6.03 for a while but last night it just stopped opening, so I deleted it and tried to redownload, but when i try to download it, it says "failed to mount" every time.
    The second problem is the display shuts off after 1 minute, I went to the energy saver and i changed it to 15 minutes an I locked it, but when i exit out of the energy save it goes back to 1 minute HELP!!!

    Sounds like you have either cache, finder, or disk corruption problems. Follow the steps here:
    http://www.thexlab.com/faqs/repairprocess.html

  • Ideeacentre B520 Display Shuts off after 1 minute

    My b520 display shuts off after 1 minute.  None of the windows setting seem to affect it.  The user Manual for the system does not seem to address this.  What am I missing?
    Solved!
    Go to Solution.

    I found the problem.  it was the lenovo dynamic brightnes system. 

  • G5 Turns off after 10 minutes

    My iMAC G5 just turns off after about 10 minutes. I had trouble with the power supply a few years ago and I replaced it and everything was great. Now it just turns off after about 10 minutes and I am wondering if the power supply is acting up again. Do these things have a problem like this? It was easy to replace, so I can just do that again if that will fix the problem. But I don't want to just start changing out parts and still have the problem. Is the power supply a problem with this model?

    More info on the iMAC. The processor is 1.8 GHz PowerPC G5 the memory is 1 GB DDR SDRAM running Mac OS X Version 10.5.3. Buss speed 600 MHz, Number of CPUs 1. I just took it apart and cleaned the dust out to see if that will help. We will see.

Maybe you are looking for

  • Invoice type WIA

    Hello! I have to bill a delivery type NL with an invoice type WIA. I see there is the copy control between the 2 documents type (delivery NL to invoice WIA), so I think it is possible to do this kind of invoicing. But when I try to create the invoice

  • Comparison between XSLT processor

    Hi Which XSLT processor has the best performance and supports the standard? Would be great if some could give me an advice :-) Greetings, Chris

  • Alignment issues between timelines?

    I am stumped. I am not a newbie, but this is driving me crazy. (not my file, supplied by client) I have a movie clip in the main timeline, which in its own timeline has rollover buttons which coincide with popup panels in the main timeline. I need to

  • Photoshop and illustrator updates break registration

    Ran the CS6 Photoshop and Illustrator updates today and found both started in trail mode. Had to reenter serial number (production premium) and update Adobe ID. Just me or a bug? --David

  • My iPod Nano buttons don't work...

    My iPod Nano buttons don't work even tho my Hold button in off when I switch my Hold button from ON to OFF my iPod shuts off then restarts by itself. My iPod is fully charged. I have updated my iPod to the latest update. I've tried to restart my iPod