Yoga Pro 3 - Wifi dropped connections; refuses to reconnect

First day of owning my Yoga Pro 3. Has anyone experienced intermittent wifi failures?
I've had trouble on both access points that I have at home. One is an older 802.11b router (set to channel 1), and other a D-Link815 dual-band bgn router (with the 2.4Ghz radio set to channel 11).
I've experienced problems using both routers on either channel and when using the 5Ghz spectrum as well.
Connectivity with either access point lasts from 5 mins to 30+ mins (in limited time I had available to use it so far).
Far more frustrating is that when dropped, the YP3 refuses to reconnect. Manually selecting the access point in the network connections charm and clicking "Connect" results in failed attempts at connecting and system will refuse to connect to any Access Point for a random amount of time. At one point I had attempted to reconnect about 20+ times before it did reconnect.
Obviously, tried rebooting without any change in behavior.
I uninstalled the Broadcom wireless driver (the system the auto-installed a Microsoft driver which, from the version number, appeared to be an older version of the same Broadcom driver as they used a very similar numbering scheme and were very close). No change. I reverted that change.
Are there known issues with these wifi cards/drivers accessing open wifi connections? I live in the middle of no-where, so have had no compelling reason to secure the access points.
What else should I try?
Thanks

My WiFi connects fine @ 2.4 GHz only Access Point (netgear wnr2000 v2) 4 rooms away (~ 35 feet and my Linksys router is on the same room as me so I get 866.5 Mbps all the time), giving me fluctuating connection speed from 243 to 300 Mbps. I generally don't use the 2.4 GHz band but I occasionally try it to check for stability. It's working fine but there's too much 2.4 GHz clients in our area so I use 5 GHz for Netflix, Hulu steaming where low latency stability is needed.
Definitely try reseating the antenna so you can rule that out. If you still can't connect @ 2.4 GHz, try other 2.4 Ghz access points or it's just that you get a defectve Broadcom 4352 card or it might be even Windows 8.1 drivers itself.
Lenovo Y470: i7-2670QM | 8 GB DDR3 1333 MHz RAM | Nvidia GeForce GT 550M | 500 GB 7200 RPM Seagate HDD | ASUS PCE-AC56 802.11ac Network Adapter | Windows 7 Professional 64-bit

Similar Messages

Wifi drops connection every time i shut the lid.

wifi drops connection every time i shut the lid, even if only for 1 second and will not reauth with the wifi without removeing, then adding the wifi back and reauth to the network every time i shut the lid.
mbp 2011

Put the hard disk to sleep when possible in energy saving settings
Note: Portable computers that have a battery you should not remove on your own include MacBook Pro (Early 2009) and later, all models of MacBook Air, and MacBook (Late 2009).
1.     Shut down the computer.
2.     Plug in the MagSafe power adapter to a power source, connecting it to the Mac if its not already connected.
3.     On the built-in keyboard, press the (left side) Shift-Control-Option keys and the power button at the same time.
4.     Release all the keys and the power button at the same time.
5.     Press the power button to turn on the computer.  Note: The LED on the MagSafe power adapter may change states or temporarily turn off when you reset the SMC.
Resetting PRAM and NVRAM
1.     Shut down the computer.
2.     Locate the following keys on the keyboard: Command, Option, P, and R. You will need to hold these keys down simultaneously in step 4.
3.     Turn on the computer.
4.     Press and hold the Command-Option-P-R keys. You must press this key combination before the gray screen appears.
5.     Hold the keys down until the computer restarts and you hear the startup sound for the second time.
6.     Release the keys

Wifi drops connection sporadic (MBP 13" Retina late 2013)

Hi,
my problem:
The Wifi connection drops every 10-20 minutes, sometimes even more often, and reconnects automatically after a few seconds. When the Wifi is connected it shows full connectivity. There are about 10 other devices in the network, none of them has the same problems - the connection is perfectly fine with every other device in the Network.
my setup:
The router is a Apple Time Capsule (newest generation) there are NO other wireless networks in my area - my wireless network is the only one i see in the list of available networks, so no interference with other networks possible.
what i already tried:
I completely wiped my hard drive and installed OSX Yosemite - the system is clean, no iCloud or Time Machine Backups!
I'm quite sure it's a hardware problem. I hope for some infos whats the next step from here?
Thanks.

Hi Moriartie,
I read your problem carefully. From the above stated problem I can assure you that your macs hardware is perfectly fine because even I
have a 13’’ retina macbook pro late 2013 model running Mavericks and it absolutely works like a charm.
The only mistake you did is by upgrading to Yosemite from Mavericks. Currently, I am running Mavericks version 10.9.5 and the machine is working flawlessly
without any hardware or software issues.
Just see in the comments section of Yosemite in the App Store of people complaining about their macs Wi-Fi issues after upgrading to Yosemite from Mavericks ( They had no Wi-Fi issues on Mavericks, late 2013 rMBP).
The only way right now is to return back to Mavericks some how until the Wi-fi bug issues get sorted out on Yosemite. Hope this might help. Sorry for the late reply.
Regards,
Grane Duke.

LaserJet Pro P1102w dropping connection

I hope someone can help. We have been having a long term issue with our HP LaserJet Pro P1102w wifi printer keeping a stable connection to our network. It connects to our network via wifi. It is in a high signal wifi area of the office.
In the printer network settings I have tried setting the printers IP as static and also tried it as dynamic being assigned by our DHCP server.
The problem is the printer keeps randomly dropping connection in that we can no longer print to the printer / access the printers webpage or ping the printer. The problems is fixed by either powering down and restarting the printer or if you leave the printer after a period of time the printer will once again be contactable (by doing nothing).
I have updated the printers firmware, computers printer drivers. Checked network settings but just cannot resolve the issue.
It's driving me crazy!

Thanks for the clarification Angus,
Try disabling the Auto Off feature, this current configuration actually turns the printer Off after 5 minutes idle (Any key pressing will turn the printer On, but any remote command as printing or accessing the printer page will fail..
You may enter the EWS by entering the printer IP through Safari.
Enter the Settings tab.
Select Print Settings and turn the Auto Off after as Never.
Click Apply and reboot the device, then check for any change.
Now reboot the device and check for any chnage,
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

Skype drops connection and cannot reconnect after network change

Whenever I switch between wifi and cable or if I enable my VPN, the skype connection drops and does not reconnect. The problem is not the VPN though because when on VPN I can Quit Skype, and reopen it and then it will connect. The same applies when switching between wifi and cable. Having to quit and restart skype everytime I switch really sucks, its supposed to be more "rugged" i would think.

Besed wrote:
techfreak, many words, but nothing to say about the issue and solution. With all respect.
Guys tell you that when they quit Skype and start it again, it connects well! It means nothing to do with local IT configuration. The problem started few months ago. There is a proxy configuration for VPN defined in Skype settings and it always worked fine, switching connection accordingly to the network. Now it loses connection when we switch between VPN and regular network and vice versa. The Skype restart is required each time to restore connection and it is REALY annoying.
If you claimed it worked differently before what changed on your end? Does it behave differently in an older version of Skype (harder to test since they're discontinuing older versions)? Most people who connect to a VPN use a VPN client to do so like the Windows PPTP VPN, Cisco VPN client, etc.. People use varying VPN servers and VPN client versions and they can behave differently. If users have a Proxy server they define that in the Proxy configuration. I've personally never attempted authenticating to a VPN server using the Skype's proxy configuration in connection settings. Split-tunneling is one setting that affects how traffic is handled and can produce a different result. I wish I could tell you there is one solution to your problem. If you determine the process differed in a earlier release, it would be helpful to post the last release it behaved in the fashion you are accustomed to. A contact of mine uses a VPN connection and toggles it on and off especially when we have bandwidth related issue. That does disrupt his Skype connection momentarily but he hasn't had to ever completely exit Skype. However he relies on the VPN client and does not place that authentication information in the proxy configuration.

Skype drops connection and cannot reconnect after ...

Whenever I switch between wifi and cable or if I enable my VPN, the skype connection drops and does not reconnect. The problem is not the VPN though because when on VPN I can Quit Skype, and reopen it and then it will connect. The same applies when switching between wifi and cable.
Having to quit and restart skype everytime I switch really sucks, its supposed to be more "rugged" i would think.

Besed wrote:
techfreak, many words, but nothing to say about the issue and solution. With all respect.
Guys tell you that when they quit Skype and start it again, it connects well! It means nothing to do with local IT configuration. The problem started few months ago. There is a proxy configuration for VPN defined in Skype settings and it always worked fine, switching connection accordingly to the network. Now it loses connection when we switch between VPN and regular network and vice versa. The Skype restart is required each time to restore connection and it is REALY annoying.
If you claimed it worked differently before what changed on your end? Does it behave differently in an older version of Skype (harder to test since they're discontinuing older versions)? Most people who connect to a VPN use a VPN client to do so like the Windows PPTP VPN, Cisco VPN client, etc.. People use varying VPN servers and VPN client versions and they can behave differently. If users have a Proxy server they define that in the Proxy configuration. I've personally never attempted authenticating to a VPN server using the Skype's proxy configuration in connection settings. Split-tunneling is one setting that affects how traffic is handled and can produce a different result. I wish I could tell you there is one solution to your problem. If you determine the process differed in a earlier release, it would be helpful to post the last release it behaved in the fashion you are accustomed to.
A contact of mine uses a VPN connection and toggles it on and off especially when we have bandwidth related issue. That does disrupt his Skype connection momentarily but he hasn't had to ever completely exit Skype. However he relies on the VPN client and does not place that authentication information in the proxy configuration.

My macbook pro wifi is connect but my apps store say No connect

muy macbook pro wifi say is connect but my apps store say No connect

mohamed fromstamford wrote:
I have been using Mac Book Air 11" since April 2011 which came with Snow Leopard pre-installed. Since the time I bought this I have been unable to get connected to the Mac Apps store. I had no such problem with my MBPro. Recently I have upgraded my MBPro to Mac OS Lion but unable to do the same on my Mac Book Air. Please suggest how I can get this done.
Thanks.
Mohamed.
Alternate way of acessing App Store:
http://support.apple.com/kb/HT2001

Applications Browser Logon & Connection Refused & Cannot reconnect to gatew

Help,
When running applications logon
http://bh001.home:8000/OA_HTML/AppsLocalLogin.jsp
I recieve a connection refused error.
Associated with this is the following when running "adstrtal.sh APPLSYS/APPS" are the following errors
=============================================================
You are running adstrtal.sh version 115.14
Executing service control script:
/opt/oracle/viscomn/admin/scripts/VIS_bh001/adapcctl.sh start
script returned:
adapcctl.sh version 115.43
Cannot reconnect to gateway
Cause: Application Object Library is unable to reconnect to your gateway ORACLE account after you unsuccessfully attempted to sign-on.
Action: Check that your gateway environment variable is set correctly.
Starting Apache Web Server Listener (dedicated HTTP) ...
Cannot reconnect to gateway
Cause: Application Object Library is unable to reconnect to your gateway ORACLE account after you unsuccessfully attempted to sign-on.
Action: Check that your gateway environment variable is set correctly.
Cannot reconnect to gateway
Cause: Application Object Library is unable to reconnect to your gateway ORACLE account after you unsuccessfully attempted to sign-on.
Action: Check that your gateway environment variable is set correctly.
Apache Web Server Listener :httpd ( pid 11104 ) is already running.
Cannot reconnect to gateway
Cause: Application Object Library is unable to reconnect to your gateway ORACLE account after you unsuccessfully attempted to sign-on.
Action: Check that your gateway environment variable is set correctly.
adapcctl.sh: exiting with status 2
.end std out.
.end err out.
Executing service control script:
/opt/oracle/viscomn/admin/scripts/VIS_bh001/adalnctl.sh start
script returned:
adalnctl.sh version
Checking for FNDFS executable.
Listener APPS_VIS has already been started.
adalnctl.sh: exiting with status 2
.end std out.
.end err out.
Executing service control script:
/opt/oracle/viscomn/admin/scripts/VIS_bh001/adcmctl.sh start
script returned:
You are running adcmctl.sh version 115.20
Starting concurrent manager for VIS ...
Starting VIS_1007@VIS Internal Concurrent Manager
Default printer is noprint
adcmctl.sh: exiting with status 0
.end std out.
.end err out.
Executing service control script:
/opt/oracle/viscomn/admin/scripts/VIS_bh001/adfrmctl.sh start
script returned:
You are running adfrmctl.sh version 115.34
Cannot reconnect to gateway
Cause: Application Object Library is unable to reconnect to your gateway ORACLE account after you unsuccessfully attempted to sign-on.
Action: Check that your gateway environment variable is set correctly.
forms server for VIS on port 9000 already started.
adfrmctl.sh: exiting with status 2
.end std out.
.end err out.
Executing service control script:
/opt/oracle/viscomn/admin/scripts/VIS_bh001/adrepctl.sh start
script returned:
You are running adrepctl.sh version 115.29
Cannot reconnect to gateway
Cause: Application Object Library is unable to reconnect to your gateway ORACLE account after you unsuccessfully attempted to sign-on.
Action: Check that your gateway environment variable is set correctly.
Reports Server for VIS is already started.
adrepctl.sh: exiting with status 2
.end std out.
.end err out.
Executing service control script:
/opt/oracle/viscomn/admin/scripts/VIS_bh001/adfmcctl.sh start
script returned:
You are running adfmcctl.sh version 115.17
Cannot reconnect to gateway
Cause: Application Object Library is unable to reconnect to your gateway ORACLE account after you unsuccessfully attempted to sign-on.
Action: Check that your gateway environment variable is set correctly.
forms load balancing client for VIS already running.
adfmcctl.sh: exiting with status 2
.end std out.
.end err out.
Executing service control script:
/opt/oracle/viscomn/admin/scripts/VIS_bh001/adfmsctl.sh start
script returned:
You are running adfmsctl.sh version 115.13
Cannot reconnect to gateway
Cause: Application Object Library is unable to reconnect to your gateway ORACLE account after you unsuccessfully attempted to sign-on.
Action: Check that your gateway environment variable is set correctly.
forms metrics serverfor VIS is already started.
adfmsctl.sh: exiting with status 2
.end std out.
.end err out.
Executing service control script:
/opt/oracle/viscomn/admin/scripts/VIS_bh001/jtffmctl.sh start
script returned:
You are running jtffmctl.sh version 115.16
Validating Fulfillment patch level via /opt/oracle/viscomn/java
Fulfillment patch level validated.
Starting Fulfillment Server for VIS on port 9300 ...
jtffmctl.sh: exiting with status 0
.end std out.
.end err out.
Executing service control script:
/opt/oracle/viscomn/admin/scripts/VIS_bh001/addisctl.sh start
script returned:
addisctl.sh version 115.14
Oracle Discoverer OAD is running as PID 11904
Oracle Discoverer OSAGENT is running as PID 11897
Oracle Discoverer LOCATOR is running as PID 11911
addisctl.sh: exiting with status 2
.end std out.
.end err out.
All enabled services for this node are started.
Check logfile /opt/oracle/viscomn/admin/log/VIS_bh001/10071410.log for details
Exiting with status 0
You have new mail in /var/spool/mail/oracle
[oracle@bh001 oracle]$ vi /opt/oracle/viscomn/admin/log/VIS_bh001/10071410.log
[oracle@bh001 oracle]$ cat /opt/oracle/viscomn/admin/log/VIS_bh001/10071410.log
Setting service Oracle Apache Server VIS_bh001 to mode 2
Executing service control script:
/opt/oracle/viscomn/admin/scripts/VIS_bh001/adapcctl.sh start
Timeout specified in context file: 100 second(s)
script returned:
adapcctl.sh version 115.43
Cannot reconnect to gateway
Cause: Application Object Library is unable to reconnect to your gateway ORACLE account after you unsuccessfully attempted to sign-on.
Action: Check that your gateway environment variable is set correctly.
Starting Apache Web Server Listener (dedicated HTTP) ...
Cannot reconnect to gateway
Cause: Application Object Library is unable to reconnect to your gateway ORACLE account after you unsuccessfully attempted to sign-on.
Action: Check that your gateway environment variable is set correctly.
Cannot reconnect to gateway
Cause: Application Object Library is unable to reconnect to your gateway ORACLE account after you unsuccessfully attempted to sign-on.
Action: Check that your gateway environment variable is set correctly.
Apache Web Server Listener :httpd ( pid 11104 ) is already running.
Cannot reconnect to gateway
Cause: Application Object Library is unable to reconnect to your gateway ORACLE account after you unsuccessfully attempted to sign-on.
Action: Check that your gateway environment variable is set correctly.
adapcctl.sh: exiting with status 2
.end std out.
.end err out.
Setting service OracleTNSListener80APPS_VIS_bh001 to mode 2
Executing service control script:
/opt/oracle/viscomn/admin/scripts/VIS_bh001/adalnctl.sh start
Timeout specified in context file: 100 second(s)
script returned:
adalnctl.sh version
Checking for FNDFS executable.
Listener APPS_VIS has already been started.
adalnctl.sh: exiting with status 2
.end std out.
.end err out.
Setting service OracleConcMgrVIS_bh001 to mode 2
Executing service control script:
/opt/oracle/viscomn/admin/scripts/VIS_bh001/adcmctl.sh start
Timeout specified in context file: 1000 second(s)
script returned:
You are running adcmctl.sh version 115.20
Starting concurrent manager for VIS ...
Starting VIS_1007@VIS Internal Concurrent Manager
Default printer is noprint
adcmctl.sh: exiting with status 0
.end std out.
.end err out.
Setting service OracleFormsServer-Forms60VIS_bh001 to mode 2
Executing service control script:
/opt/oracle/viscomn/admin/scripts/VIS_bh001/adfrmctl.sh start
Timeout specified in context file: 100 second(s)
script returned:
You are running adfrmctl.sh version 115.34
Cannot reconnect to gateway
Cause: Application Object Library is unable to reconnect to your gateway ORACLE account after you unsuccessfully attempted to sign-on.
Action: Check that your gateway environment variable is set correctly.
forms server for VIS on port 9000 already started.
adfrmctl.sh: exiting with status 2
.end std out.
.end err out.
Setting service OracleReportServer-Rep60_VIS to mode 2
Executing service control script:
/opt/oracle/viscomn/admin/scripts/VIS_bh001/adrepctl.sh start
Timeout specified in context file: 100 second(s)
script returned:
You are running adrepctl.sh version 115.29
Cannot reconnect to gateway
Cause: Application Object Library is unable to reconnect to your gateway ORACLE account after you unsuccessfully attempted to sign-on.
Action: Check that your gateway environment variable is set correctly.
Reports Server for VIS is already started.
adrepctl.sh: exiting with status 2
.end std out.
.end err out.
Setting service Oracle Metrics Client VIS_bh001 to mode 2
Executing service control script:
/opt/oracle/viscomn/admin/scripts/VIS_bh001/adfmcctl.sh start
Timeout specified in context file: 100 second(s)
script returned:
You are running adfmcctl.sh version 115.17
Cannot reconnect to gateway
Cause: Application Object Library is unable to reconnect to your gateway ORACLE account after you unsuccessfully attempted to sign-on.
Action: Check that your gateway environment variable is set correctly.
forms load balancing client for VIS already running.
adfmcctl.sh: exiting with status 2
.end std out.
.end err out.
Setting service Oracle Metrics Server VIS_bh001 to mode 2
Executing service control script:
/opt/oracle/viscomn/admin/scripts/VIS_bh001/adfmsctl.sh start
Timeout specified in context file: 100 second(s)
script returned:
You are running adfmsctl.sh version 115.13
Cannot reconnect to gateway
Cause: Application Object Library is unable to reconnect to your gateway ORACLE account after you unsuccessfully attempted to sign-on.
Action: Check that your gateway environment variable is set correctly.
forms metrics serverfor VIS is already started.
adfmsctl.sh: exiting with status 2
.end std out.
.end err out.
Setting service Oracle Fulfillment Server VIS_bh001 to mode 2
Executing service control script:
/opt/oracle/viscomn/admin/scripts/VIS_bh001/jtffmctl.sh start
Timeout specified in context file: 100 second(s)
script returned:
You are running jtffmctl.sh version 115.16
Validating Fulfillment patch level via /opt/oracle/viscomn/java
Fulfillment patch level validated.
Starting Fulfillment Server for VIS on port 9300 ...
jtffmctl.sh: exiting with status 0
.end std out.
.end err out.
Setting service Oracle Discoverer services VIS_bh001 to mode 2
Executing service control script:
/opt/oracle/viscomn/admin/scripts/VIS_bh001/addisctl.sh start
Timeout specified in context file: 300 second(s)
script returned:
addisctl.sh version 115.14
Oracle Discoverer OAD is running as PID 11904
Oracle Discoverer OSAGENT is running as PID 11897
Oracle Discoverer LOCATOR is running as PID 11911
addisctl.sh: exiting with status 2
.end std out.
.end err out.
[Service Control Execution Report]
The report format is:
<Service> <Script> <Status>
Oracle Apache Server VIS_bh001 adapcctl.sh Already Started
OracleTNSListener80APPS_VIS_bh001 adalnctl.sh Already Started
OracleConcMgrVIS_bh001 adcmctl.sh Started
OracleFormsServer-Forms60VIS_bh001 adfrmctl.sh Already Started
OracleReportServer-Rep60_VIS adrepctl.sh Already Started
Oracle Metrics Client VIS_bh001 adfmcctl.sh Already Started
Oracle Metrics Server VIS_bh001 adfmsctl.sh Already Started
Oracle Fulfillment Server VIS_bh001 jtffmctl.sh Started
Oracle Discoverer services VIS_bh001 addisctl.sh Already Started
Oracle Restricted Apache Server VIS_bh001 adaprstctl.sh Disabled
Oracle Apache Server VIS_bh001 for PL/SQL adapcctl.sh Disabled
Oracle TCF SocketServer VIS_bh001 adtcfctl.sh Disabled
Oracle ICSM VIS_bh001 ieoicsm.sh Disabled
Oracle iProcurement Bulk Loader VIS_bh001 icxblkctl.sh Disabled
ServiceControl is exiting with status 0
======================================================================
I have opened port 8000 in iptables and on my router/gateway 192.168.1.1
Any help would be appreciated.
Regards,
Ian

Guys
I've installed Vision Demo and able to access it via FireFox download Jinitiator and login in the applet application.However i can't extract any information as my con-current manager seems to be deactivated or unable to start.
Has it something to do with my dbc settings given below.
Kindly guide
#DB Settings
#Sun Nov 11 18:57:53 GMT+05:00 2007
APPS_JDBC_DRIVER_TYPE=THIN
APPL_SERVER_ID=3EA7999F112FD6D8E040010A526B037820977692751688897870234607460780
TWO_TASK=VIS
GUEST_USER_PWD=GUEST/ORACLE
DB_HOST=ibm_vision.hrms.com
DB_NAME=VIS
FNDNAM=APPS
GWYUID=APPLSYSPUB/PUB
DB_PORT=1521
Regards

BT Wifi drops connections periodically

While I'm waiting for BT to resolve the issues encountered while installing my line, I've been using BT Wifi (FON) now & then.
I noticed this week, that after a while of being logged in (login via BT ID, not by purchasing time), after a while, the session is logged out. I actually noticed as it happened while my lad was watching a video on YouTube on the laptop.
It's not a problem to log back in again & it works, but it is a hassle. Same problem doesn't exist when using the mobile/tablet app - so it's clearly not an account limitation.
Anyone any ideas of the cause? Or an easy work around (don't say to install the app on the laptop... it'd be much easier/faster for me to write an auto-login script for the browser & sit it on a background page in Chrome)?
Solved!
Go to Solution.

BTWIFI is set to drop connection every 2 hrs (I think) to stop people downloading large files. it will also disconencted after 15min of inactivity
If you like a post, or want to say thanks for a helpful answer, please click on the Ratings star on the left-hand side of the post.
If someone answers your question correctly please let other members know by clicking on ’Mark as Accepted Solution’.

Aiport on Macbook Pro 2011 drops connection

Hi,
had a MBP 2009, no problems at all... got a new MBP 2011 last month; problem: it always drops the WIFI connection. I have to deactivate and reactivate Airport (at the MBP) to regain connectivity. It's driving me crazy... any suggestions?
Best regards

same thing to me....my 2010 macbook pro never has this problem....only the 2011 i got 2weeks ago.........most time am downloding ,thinking when i return i will watch movie or lauch app....i have to start over again after many hours wasted.......

Wifi dropping connection

My PB keeps dropping my wifi connection at work. It works flawless at home, but wont stay connected for more than 5 minutes t work. They use WPA2 security which i read doesnt work properly on the PB.
Plz help, any suggestions?

with out work making a change to wifi, not sure how to assist.
OS 2 is coming in a few weeks, I hope that will be addressed to make it better for you
Click here to Backup the data on your BlackBerry Device! It's important, and FREE!
Click "Accept as Solution" if your problem is solved. To give thanks, click thumbs up
Click to search the Knowledge Base at BTSC and click to Read The Fabulous Manuals
BESAdmin's, please make a signature with your BES environment info.
SIM Free BlackBerry Unlocking FAQ
Follow me on Twitter @knottyrope
Want to thank me? Buy my KnottyRope App here
BES 12 and BES 5.0.4 with Exchange 2010 and SQL 2012 Hyper V

PlayBook WIFI drops connection

Hello All:
I saw some other posts about the same issue, but they were from last year and was hoping for some more recent suggestions. My 32 GB PlayBook will drop wifi, and I have to turn off the wifi, turn it back on and reonnect. Then it works fine until the next time I put it to sleep and turn it back again later.
None of my other devices (e.g., Z10, iPad, or iMac) have this problem, so it seems to be a PlayBook issue.
Any suggestions?
Paul

Look at my tips on wifi
Speed-up-BlackBerry-Wi-Fi-connections-a-knottyrope-tip
Click here to Backup the data on your BlackBerry Device! It's important, and FREE!
Click "Accept as Solution" if your problem is solved. To give thanks, click thumbs up
Click to search the Knowledge Base at BTSC and click to Read The Fabulous Manuals
BESAdmin's, please make a signature with your BES environment info.
SIM Free BlackBerry Unlocking FAQ
Follow me on Twitter @knottyrope
Want to thank me? Buy my KnottyRope App here
BES 12 and BES 5.0.4 with Exchange 2010 and SQL 2012 Hyper V

Yoga 13 bluetooth drops connection

I have a Yoga 13 (Windows 8) and a Lenovo Thinkpad Bluetooth keyboard. The keyboard disconnects from the computer every few minutes. Sometimes it reconnects on its own after 30 seconds or so. Sometimes it needs to be restarted and sometimes it won't reconnect for several minutes despite numerous restarts.
I have replaced the keyboard. The new keyboard behaves exactly the same way.
I have replaced the wireless card. No improvement.
It is possible that the new wireless card is also defective.
I have tried to update drivers, although the drivers for the keyboard still seem to be dated June 2006, which seems an awfully long time ago.
Any ideas? Lenovo seems stumped (or just does not want to help diagnose the problem). I do have onsite service.

I haven't tried using a Bluetooth headset with Windows, but check:
1. Right-click on the sound tray icon, select Playback devices. Does it show a 2nd bluetooth headset device in addition to Speakers? If so, left-click on it and try the "Set Default" dropown menu on the bottom to make it the Default device (or some other option that works better).
2. http://support.microsoft.com/kb/933144
3. http://www.computing.net/answers/hardware/making-bluetooth-headset-default-audio-device/87178.html

Iphone wifi dropping connection when locked

all in the title but, when locked it forgets the wi-fi password, and so i have to re enter it.
iphone 4
belkin wireless n router with wpa passphrase.

Are you hiding your network identification (SSID)? If you are doing that, it is a pretty common complaint. In either case, the fix is about the same:
Fix 1
When you are connected to your network, tap Settings > WiFi > and then tap the blue ">" next to the network name with the check mark.
The next screen will give you your connection information. Scroll until you find "Forget this Network" and tap that.
That should return you to the Settings > WiFi page. Tap Other, and then re-enter your network name, security, and network password.
Fix 2
tap Settings > General > Reset > Reset Your Network Settings
When the iPhone restarts, tap Settings > WiFi > Other and re-enter your network name, security, and network password.
Fix 3 - if all else fails
Reboot your router (uun plug it from it's power source).

WiFi drops connection and then won't let me turn the WiFi back on I used to have to restart the computer but now its showing no WiFi hardware installed PLEASE HELP!!

My WiFi will stay connected for some time but then when it goes to sleep or randomly it will turn itself off. I used to have to restart the computer a few times but now its telling me WIFI:No hardware installed Please help

My WiFi will stay connected for some time but then when it goes to sleep or randomly it will turn itself off. I used to have to restart the computer a few times but now its telling me WIFI:No hardware installed Please help

Yoga Pro 3 - Wifi dropped connections; refuses to reconnect

Similar Messages

Maybe you are looking for