Yoga Tablet 2 10 1051 Windows 8.1 Frozen - Won't turn on after sleep

I combined several threads where customers report that after their Yoga Tablet 2 10 1051 tablet goes into sleep mode, it does not come out of it immediately when the power button is tapped.
I am investigating these reports, and will provide updates as this investigation develops.
Thank you,
3/9/15 EDIT: Moved to front of discussion for escalation purposes. Amy_Lenovo
Amy Tupper
Technical Resolution Lead, Pervasive Issues
Lenovo US
ThinkPad T431s, S3 Yoga 14, Helix, Edge 11 & 14, E431, IdeaTab A1107, IdeaPad A1-07, IdeaCentre Horizon, Yoga Tablet 2 10 1051
First computer was a 1980 Commodore 64 from Radio Shack/ GEnie SFRT member from 1993-1996
Solved!
Go to Solution.

After tablet goes to sleep due to no use it wont turn on back when pressin power button. Agterv some time (could be hours) and multiply presses on power button it turns on for some reason. Can't really figure out any preconditions ore sequences. But it happens almost every time it stays in sleeep mode for a long time, which is extremely annoying as tablet can't be use same moment when it is needed.

Similar Messages

Turn on! My mac won't turn on after sleeping!

Ever had a problem where your computer won't turn on after sleeping for a few minutes? (I've discovered that too many downloads cause this) Anyway... have you ever tried pushing the power button for one second? Try it! It's been working for me! Hope this helped!
(If it still won't turn on, try typing in letters randomly for one minute. Just type anything like: asdjhas)

Try resetting the SMC and PRAM
Intel-based Macs: Resetting the System Management Controller (SMC)
About NVRAM and PRAM

E320 - wireless won't turn on after sleep

When i open lid after my laptop goes to sleep after i close it, wireless won't turn on (brand new laptop).
I fresh installed win7 x64 (with SP1 and all updates), all drivers and updates from lenovo page (power management, windows update "Enabling Wake on LAN from Standby for ENERGY STAR Version 4.0 for Windows 7", etc.....). I unchecked "allow the computer to turn off this device to save power" on wifi driver...
Bios is very small - didn't found stuff like "wake on lan", "flash over lan", etc.
In PROset/Wireless tool->Diagnose, it says Radio test-radio off....
Need little help
Solved!
Go to Solution.

denied wrote:
So, if anybody have similiar problem - try that
If you could mark the post you consider to have helped lead you to finding the solution as the solution this will help other members experiencing the same or similar hopefully find it quicker when using the forum search function.
[Click on Options, top right of the relevant post, and select Accept as Solution]
edit; for clarity
Andy ______________________________________
Please remember to come back and mark the post that you feel solved your question as the solution, it earns the member + points
Did you find a post helpfull? You can thank the member by clicking on the star to the left awarding them Kudos Please add your type, model number and OS to your signature, it helps to help you. Forum Search Option T430 2347-G7U W8 x64, Yoga 10 HD+, Tablet 1838-2BG, T61p 6460-67G W7 x64, T43p 2668-G2G XP, T23 2647-9LG XP, plus a few more. FYI Unsolicited Personal Messages will be ignored.
Deutsche Community Comunidad en Español English Community Русскоязычное Сообщество
PepperonI blog

Newest Macbook won't turn on after sleep mode

I have the 17" Macbook Pro I guess the base model (?), bought in september of 2012. I turned it on today perfectly fine for about a half an hour. I closed the screen just like I would any other time normally but just now when I opened it back up it won't turn back on. I tried the power button several times but nothing, the power is fine since it's plugged in with the green light on. I don't understand what is going on... help!

http://support.apple.com/kb/PH11080
http://support.apple.com/kb/PH11096
maybe there is some help here

Laptop screen won't turn on after sleep, requires reboot

I close the screen to my Macbook Pro when going to be away for a length of time. Until recently, the screen would turn on when I opened the computer. Now, although the computer is on, the screen won't light up when I open it. The laptop now requires a forced rebook in order for the screen to work. Will this require a service call?

Reset PRAM. http://support.apple.com/kb/PH4405
Reset SMC. http://support.apple.com/kb/HT3964
Choose the method for:
"Resetting SMC on portables with a battery you should not remove on your own".
Best.

8560w Wireless Radio won't turn on after sleep mode

Anyone know the fix for the 8560w not turning on it's WiFi radio post sleep mode. It doesn't happen everytime, but most of the time. I will be at my workstation and when I close the lid, go to my meeting and turn it back on the wireless is off and I have to go to the "Windows Mobility Center" to turn it back on.
Any ideas or thoughts would be greatly appreciated.
Thanks!

Hi:
What model wireless adapter is in your notebook?
Maybe a driver update will help.
Paul

Monitor won't turn on after "sleep"

Hi,
I have an Apple Studio Display 17" hooked up to a New Mac Pro, running 10.4 Tiger. When the computer goes to sleep the monitor won't come back on when I wake it unless I shut the monitor off and turn it back on again. Why?
Dan

What did ssh probing tell you.
Try using PC blindly. For example, leave music player on screen, wait for the fault to appear and than start it. If you hear the sound, then it is either:
Your closed-source driver mistake. Try changing it's version either side or replacing with open-source one. For radeon it is really better already.
Your monitor can't wake up from sleep. Nothing can help it, then. When rebooting PC, it gets a special signal, different from that on sleep.

Airport won't turn on after sleep

Recently purchased 2 new imacs(1-24", 1-20"). They are both having the same problem. When I wake them up from a powersave sleep the airport is turned off. This wouldn't be a problem except it wont turn back on. If I click to turn it on it doesn't do anything at all. If I go to assist me -> diagnostics it just says scanning... but never does anything else. The only way I can get back up and running is a restart. This is a problem because I run software that needs to send a backup to the server on shutdown. I have temporarily set the powersave up to 3 hours, but I would much rather fix the problem than work around it.

Hi, When the computer goes into sleep mode, it is like shutting it down, in that it halts any and all processes.
Because nothing is happening until it wakes back up, that is why Entourage won't get it's mail. MSN will disconnect whenever the computer is put to sleep (or more annoyingly, whenever it damned feels like it).
So yes, this is normal behaviour with sleep mode, and the only workaround I know of is to not have the computer sleep. (But the monitor can always turn off, and the hard drives spin down.)

Screen won't turn on after sleep

Hey guys, I've only had my GT-72 for a month and recently I've been having issues when putting mine to sleep.
I'll close the lid, come back later, open the lid and the power/gpu lights/front lights turn on, but that's it. I also hear the hard drive fire up too. The screen although does not turn on and no matter if I tap the keyboard/peripheral mouse, or power button it is unresponsive. The only way I can get the laptop back is to do a hard shutdown by holding the power button and restarting it.
Any solutions or ideas what may be causing this?
Thanks all!

The possible causes of the situation could be a lot. You had better contact service center for precise testing . If you insist to try bios renewing ,you can refer to the following link of msi website.>>http://www.msi.com/files/pdf/Flash_BIOS_by_UEFI_BIOS_Setup_Utility_en.pdf

Screen won't turn on after sleep for newest macbook pro (Feb 26 2011)

Hi!
I just bought the 13' Macbook Pro with an 2.7GHz dual-core i7 processor and 500GB of space, the $1500 model. I am having a problem with the screen and I am wondering if I should be worried about it or if anyone else has noticed it. If it continues, I will have to take it into the store and see if I can get it fixed.
My macbooks screen will not turn on after it falls asleep for a long period of time. The first night I had this computer, it was playing music and I turned the screen brightness all the way down/off and then I fell asleep. The energy settings were set so that the computer would fall asleep after 20 minutes. Pathfinder, F.lux and iTunes were the only application running at the time. When I woke up the next morning, the light on the computer's side indicating it was asleep was slowly fading in and out (as expected). I hit some keys on the keyboard and the keyboards backlighting turned on after a few seconds.
But the screen did not turn on. I tried adjusting the screen brightness on the keyboard and nothing happened. After a few minutes, I held down the power button and heard the computer turn off. I turned the computer back on, AND THE SCREEN LOOKED VERY STRANGE. I could see part of iTunes fragmented/segmented into 5 or 6 sections across the screen. There were also strange lines going across the screen. It looked kind of like a leftover image of iTunes that could be solved with a screen refresh. I turned off my computer again and turned it back on about two more times, and then the screen would simple just not turn on.
As I was packing up to go to the Apple Store, I tried one more time to turn my computer on and the screen was working fine. This was yesterday, and for the rest of the day the computer seemed to work fine. However, I don't think I let my computer fall asleep all day yesterday because I was using it so much.
Basically the same thing happened this morning when I woke up, except to a lesser degree. My computers screen was unresponsive after keyboard input, but I was able to get music to play from my speakers. I restarted it and it seems to be working fine. I didn't see the screen do that weird fragmentation thing this time.
I think something about the sleep function is interfering with my computer's screen. Or perhaps Pathfinder or F.lux have something to do with it. F.lux, by the way, is a application that turns the screen a dark yellowish at night to help your eyes. But I have friends that use this application and I myself have used it for a while and we have never had this problem. Then again, none of them have a 13 inch with an i7.
Does anyone know about this problem and have advice that would save me a trip to the Apple store?
thanks!

Bad news and good news. The bad news is that it happened again this morning. The good news is that I finally found something interesting in the console log, at the exact second my clock is stuck when the machine is failing to wake from sleep:
3/10/11 7:33:53 AM kernel WaitForStamp: Overflowed waiting for stamp 0x32b5d on Blit ring: called from wait for blt buffer (2D blt)
3/10/11 7:33:53 AM kernel timestamp = 0x32b5c
3/10/11 7:33:53 AM kernel ** Debug info for apparent hang in Blit graphics engine **
3/10/11 7:33:53 AM kernel ring head = 0x000013b0, wrap count = 0x 0
3/10/11 7:33:53 AM kernel ring tail = 0x00001f58 ring control = 0x00003401 enabled, auto report disabled, not waiting, semaphore is waiting, length = 0x004 4KB pages
3/10/11 7:33:53 AM kernel timestamps = 0x32b5c
3/10/11 7:33:53 AM kernel Semaphore register values:
3/10/11 7:33:53 AM kernel VRSYNC: (0x12044) = 0x0
3/10/11 7:33:53 AM kernel BRSYNC: (0x22040) = 0x0
3/10/11 7:33:53 AM kernel RVSYNC: (0x 2040) = 0x0
3/10/11 7:33:53 AM kernel BVSYNC: (0x22044) = 0x0
3/10/11 7:33:53 AM kernel RBSYNC: (0x 2044) = 0x0
3/10/11 7:33:53 AM kernel VBSYNC: (0x12040) = 0x0
3/10/11 7:33:53 AM kernel trying to clear semaphore wait on Blit ring
3/10/11 7:33:53 AM kernel After attempt to clear semaphor wait = 0x00003001 no longer waiting
3/10/11 7:33:53 AM kernel kIPEHR: 0x1800001
3/10/11 7:33:53 AM kernel kINSTDONE: 0xffffffff
3/10/11 7:33:53 AM kernel kINSTDONE_1: 0x3fffffff
From when the problem apparently starts (some point in the night while my machine is idle and supposedly asleep) until when I discover it and reboot the machine, I get dozens or hundreds of the above messages. Now somebody just needs to figure out what that means and stop it from happening...

Rmbp 13" 2014 won't turn on after sleep battery drain

Hi peeps,
Today, my rmbp 13" from 2014 failed to start after it's battery ran dry while it was sleeping.
I have let it charge for a while (about 15 minutes) and then it wanted to turn on again.
My question is: is this normal behavior? I found another thread with kind of the same question but it was irrelative due to other issues being present in that particular thread.
Best regards,
IT07.

Possibly, but somethings may be left under the user's control.
About Batteries in Modern Apple Laptops
Battery University
Apple - Batteries - Notebooks
Apple - Batteries
Extending the Life of Your Laptop Battery
MacBook and MacBook Pro- Mac reduces processor speed when battery is removed while operating from an A-C adaptor
Apple Portables- Calibrating your computer's battery for best performance
Mac notebooks- Determining battery cycle count

Yoga tablet 2 windows 8.1 miracast issue

hi all, i seems unable to connect to my LG smartTV from the Yoga Tablet 2 Windows 8.1 by Miracast, it always prompt unable to connect... anyone have the same issue? many thanks. brgds/fred

Paputo- Running powercfg /a on my Yoga Tablet 2-1051 yields "The following sleeps states are available on this system: Standby (Connected)" which suggest to me that it is supported. It doesn't mention Hibernate and Fast Start being available though. Hope this helps.

Memory RAM upgrade won't wake up after sleep mode

i just recently purchase a pair 16GB RAM of crucial CT2K8G3S160BM for newegg.com. Yeesterday i try put this on my macbook i7 intel 2.9 processor that crucial said is compatible. but found out everything was good until i close my mac lid for hibernate. What happen is, it won't wake up no matter what i do until a way of reset SMC. BTW i try stick by stick to plug in together with my original 4gb RAM together found out 1 was ok and other one was not. But somehow why the info of hardware show that memory ram 16GB was installed and was OK. Everything was run smooth even booting. The only problem is won't wake up after sleep mode. I already try reset smc, pram, delete startimage, delete powermanagement.file and also sudo hibernate 0-7. Did anyone had this same issue of me. I'm my curiousity will it be the bad ram or software problem.

i just google around and found this two both crucial ram. Both spec are the same but different model no.
CT102464BF160B 16GB and mine is CT2K8G3S160BM are this 2 same? but both same spec.
http://www.bhphotovideo.com/c/product/877010-REG/Crucial_Technology_CT102464BF16 0B_16GB_2_x.html
http://www.bhphotovideo.com/c/product/889298-REG/Crucial_CT2K8G3S160BM_16GB_2x8_ 204P_SODIMM.html

What to do now when my iPad won't turn on after I turn it off. It shows only the apple logo. I am sure it has above 70% charge as when I sync my iPad it shows necessary detail in iTunes. I have tried, HOME & POWER button, but did not work.

What to do now when my iPad won't turn on after I turn it off. It shows only the apple logo. I am sure it has above 70% charge as when I sync my iPad it shows necessary detail in iTunes. I have tried, HOME & POWER button, but did not work.

First try a Reset ( No Data will be Lost )
Press and hold the Sleep/Wake button and the Home button at the same time for at least Ten seconds... (But can take Longer)... until the Apple logo appears. Release the Buttons
If no joy... Try a Restore...
1: Connect the device to Your computer and open iTunes.
2: If the device appears in iTunes, select and click Restore on the Summary pane.
Restoring > http://support.apple.com/kb/HT1414
Make sure you have the Current Version of iTunes Installed on your computer
iTunes free download from www.itunes.com/download
3: If Unable to Restore, try using the Steps in this article to force the device into Recovery Mode.
Note on Recovery Mode.
You may need to try this More than Once... Be sure to Follow ALL the Steps...
After you have Recovered your Device...
Re-Sync your Content or Restore from the most Recent Backup...
Restore from Backup > http://support.apple.com/kb/ht1766

MacBook Pro 15" won't turn on after a shut down.

My MacBook Pro 15" late 2008 mavericks won't turn on after a shut down. Tried SMC reset, plugged and unplugged charger multiple times as well as installing the battery. It has started that after a while I have replaced my old battery with a new one,upgraded to Mavericks and increased my memory to 4GB. In the beginning after I would install every time the battery ,it' would turn on after 8-10 tries. Today it's completely unresponsive . Tested different outlets, with and without battery,nothing worked. I also heard that some other people have this issue once they have updated their operating system from 10.5.8 to Mavericks. Is that the problem.? Has anyone found a solution to this?

Hi there Olgabinou,
You may find the troubleshooting steps in the article below helpful.
Troubleshooting: My computer won't turn on
http://support.apple.com/kb/ts1367
-Griff W.

Yoga Tablet 2 10 1051 Windows 8.1 Frozen - Won't turn on after sleep

Similar Messages

Maybe you are looking for