Yoga - Thinkpad message receiver for shortcut hot keys and 30 % CPU usage after lock screen or sleep

Hi! After returning from sleep or lock screen a process called "Thinkpad message receiver for shortcut hot keys" starts using about 30% of the CPU. Temps go upo to 60-70 degrees battery is being depleted quite fast. This process doesn't stop until I end it using task manager. Once ended that way, it doesn't start again even if I use sleep or lock screen. Need help with this!
I didn't use to have this problem like a month ago or so. Probably came into existence after some updates.
Solved!
Go to Solution.

ChrisL_US wrote:
Do any of you have Kaspersky Anti-Virus or Internet Security? Seems like few T540 owners also got the same problem and one of them discovered it is Kaspersky causing the problem. I can comform it too.
I am using Kaspersky Internet Secuirty 2015, when I resume my TPY from sleep, the message receiver for shortcut hot keys will show up and use 20-35% processing power which cause the laptop to heat up.
I hope a Thinkpad rep can come in to report the bug.
The T540p post link: https://forums.lenovo.com/t5/T400-T500-and-newer-T-series/t540p-high-cpu-usage-by-shtctky-exe-ThinkP...
Thanks ChrisL_US! I do have kaspersky anti-virus 2015 installed.

Similar Messages

No composite message received for few requisitions

No composite message received for few requisitions
Our newScale production environment has some OPEN requisitions, which have actually been marked Resovled in Remedy system.
For these requisitions, newScale does not have any composite messages in ServiceLink queue (Not even one...). Customers are complaining that the incidents created are marked Resolved in Remedy system, However their newScale requisition is not completed.
We checked the staging/proxy form database and found that the records for these requisitions are properly updated from Remedy system, however the information never got pulled in newScale system.
If anyone has ever noticed a similar issue, please let us know.

Hello,
Ummm, I think the previous post may be incorrect. The TxJMSMESSAGE table is typically where emails are stored, and the correct column name there is not "retry", but rather "Trials" (i.e. how many times has the email tried to be sent out).
Having said all that, I don't think this table is where the composite message content gets stored, I believe that this is actually in the XTRMESSAGECONTENT table (but only after the message gets processed).

Hot-keys and shortcut keys

Dear
I received the question below and I'm not sure about the answer:
Does the solution makes consistent use of function keys, hot-keys and short-cut keys across all modules and components?
Thanks and Best Regards

The answer is yes.
The question would be what hot-keys, etc. do you mean. I am aware only of Ctrl + Shift + F5, but I think there are few more. Alternatively, a component could add something - this could be dependent on the author of the component.

HT1386 I SUDDENLY GET THE MESSAGE "WAITING FOR SYNC TO START" AND THEN SEVERAL MINUTES LATER A MESSAGE SAYING SYNC HAS FAILED BECUASE IT DIDN'T START!

I SUDDENLY GET THE MESSAGE "WAITING FOR SYNC TO START" AND THEN SEVERAL MINUTES LATER A MESSAGE SAYING SYNC HAS FAILED BECAuSE IT DIDN'T START!

Se if this previous discussion helps:
Sync Session Failed to Start iTouch iOS5: Apple Support Communities

Unable to sync contacts, keep saying 'ipad already using contacts'. When I open contacts app it opens for fraction of secs and goes back to main screen. any ideas?

Unable to sync contacts, keep saying 'ipad already using contacts'. When I open contacts app it opens for fraction of secs and goes back to main screen. any ideas?

Sorry for double post, doesnt seem to be an edit option, this also works both ways.

I forgot the security answers for my security questions and now I'm locked out

i forgot the security answers for my security questions and now i'm locked out.

Try this Discussion...
https://discussions.apple.com/thread/4305745
And/or see the More Like This section on the right.

What is the font Apple uses for the time and date on the lock screen in iOS 7?

I can't find the answer on Google. What is the font Apple uses for the time and date on the lock screen in iOS 7?

This font. It's weird, it looks different when viewing the screenshot on my iMac, than it does on my iPod touch. Probably because of the retina screen of the iPod.

Touchpad hot-keys don't work after installing Wii XP on Satellite A200-1HV

Synaptics hot-keys after installing WinXp doesn't work.
http://i043.radikal.ru/0805/c5/09a7324bc1d2.jpg
On Vista i touch "Two arrows" touchpad lite up blue colour but now this does not happen.
I installed driver from Toshiba web-site for Win XP.
How to on hot-keys on touchpad?
From Russia with love = )

May be i said not good, about problem? I will try tell about my trouble. In Windows Vista Home Basic, when i touch "2 arrows" (You can see it, on screenshot, in up-right angel), after that, touchpad Began fluoresce by the blue colour, and after that i push 1 button from 6 buttons on touchpad (they all in red circle) and starts tha application. But no, when i touch "2 arrows", nothing happened. Is it information help to solve problem?
P.S. I try phone to Support, but, now in Russia we have holidays = (
Sincerely your JIABP.

Trouble with hot keys and preferences

Some of my hot keys decided to be a bit moody and stop working. For example: Ctrl+Space to zoom or Space for the Hand Tool. I know my spacebar still works properly and also tried restarting my computer.
After searching the forums and FAQ I also tried:
Reset Tool and
Reset All Tools
Which didn't cure the problem. I also tried simultaneously hold down Shift+Option+Command keys when I launched PS CS5 but the only window I have pop up is the Scratch Disk Preference window...
Any suggestions or ideas what may be the issue here? Thanks you in advanced!

Unfortunately htting the esc key does not solve it. Does the 3-button method only work for certain versions and/or platforms? As I mentioned, while holding them down while launching it only pops up the Scratch Disk Preferences.

Want to switch the position for the Fn key and Ctrl key~~ very annoying

I got my W520 CTO for about two weeks, I hate the keyboard design.
I don't understand why Lenovo engineers change the positions of
Fn key and Ctrl key! So unprofessional..
For most keyboards, the Ctrl Key is at most bottom-left, which
is convenient for the little finger.
Ctrl key is so often used (especially for programmer) such that
it should be easily pressed using litter finger.
Fn key is seldom used (unless for projector, adjust brightness
as such).
I am thinking to change the position of the two keys, does Lenovo
provide this service?

http://forums.lenovo.com/t5/T400-T500-and-newer-T-series/Why-is-the-FN-key-on-the-outside-left-inste...
I prefer Ctrl on the inside; it's closer to the pinky. Also more comfortable for FPS's as you can curl the pinky and hit it with the back rather than the front.
W520: i7-2720QM, Q2000M at 1080/688/1376, 21GB RAM, 500GB + 750GB HDD, FHD screen
X61T: L7500, 3GB RAM, 500GB HDD, XGA screen, Ultrabase
Y3P: 5Y70, 8GB RAM, 256GB SSD, QHD+ screen

Wifi has suddenly stopped working. There is an exclamation mark which takes me to network diagnostics. This asks me for network name and password. This is different from the startup wizard which only asked for a WEP key and modem name. What to do?

My wifi has suddenly stopped working on my iMac, after working fine for almost a year. There is an exclamation mark on the wifi bars and when I click it, it takes me to a network diagnostics page. This page asks me for my username and password for the wifi, which I don't have. It is different from the WEP key and modem name, which I originally used to set up my connection. I have not experienced any problems on all my other wifi-enabled devices. Ipod touch, iPad, MacBook all work fine. What should I do?

The name is the name of the network you created on the router. The password is the WEP password. You shouldn't be using WEP at all, as it's insecure and also seems to cause connection failures. Use WPA 2 Personal. If your router doesn't support it, get a new one.

Is there a way to still get audible alerts of new messages without having any banners or text appear in the lock screen?

I'm trying to make sure I am doing this correctly. How do you set up alerts for both text messages and iMessages so that even when the phone is locked you will still get an audible or vibration alert as soon as the message is received? And is there a way to do this without having any text appear on the lock screen that shows who the message is from. My phone stays in locked mode most of the time but I still want to recieve alerts for new messages as soon as they arrive. I'm also concerned about privacy so I don't want any text or preview or even any information about the sender to appear on the lock screen. I just want a vibration or audible alert.

Open the Settings app > Notifications > Messages. Scroll down adn turn OFF "View In Lock Screen". You may want to consider setting Alert style to none, but this will not impact what happens when the screen is locked.

Automatic logout after lock screen for long time?

When I leave my mac screen locked for long time, sometimes I see the following message after unlocking screen:
"Logout has timed out because the application [x] failed to quit...."
Where [x] is some application trying to quit, and is waiting for user confirmation. This happens even when the computer is plugged in to AC. Has anyone else seen this problem? TIA

Found it:
http://www.askdavetaylor.com/canmac_automatically_log_out_user_afterinactivity.html
D'uh

MBP 5,3 75°C hot at 0% CPU load after SSD install

Hello, i decided to post my problem here because i have not found any help on other forums.
Two weeks ago i installed a Samsung 830 SSD with 256 GB using the Optibay SSD Kit from Hardwrk (http://hardwrk.com/en/ssd-hdd-adapter-kit-for-macbook-pro.html). The SSD sits where the HDD was beforce and the old 500 GB HDD sits in the Adapter from the Kit where the optical drive was.
After installing the hardware, everything worked fine; i (partially) cloned the HDD to the SSD and booted from it. Only the biggest User folders are left on the HDD. A couple of days later i noticed that the CPU temperature was between 75°C and 80°C in idle, with no processes causing CPU load. The fans are working and spinning with about 3000 rpm. I increased the fan speed to maximum with iStat Menus and the temperature lowered to about 58°C which was normal before installing the SSD. After about 10 minutes of maximum fan speed i set the fans back to normal and the temperature increased to 78°C again.
I tried a safe boot and there are no such problems, the CPU temperature is at 58°C in idle. So i booted in normal mode again and the temperature stayed at 58°C in idle. I shut down the MacBook and turned it on again in normal mode. The temperature increased to 80°C and stayed. I don't understand that behaviour.
The HDD is far away from the CPU so it doesn't affect heating, the SSD is more cold than hot. I don't know where this problem comes from. Has anybody noticed a similar behaviour after installing a SSD? If you need additional information i will provide these.

Hello and thank you for participating in this discussion,
as i am the starter of this thread, i want to tell you the story how i fixed this problem.
as you know the MacBook from Mid 2009 has TWO internal SATA ports, one for the optical drive and the other for storage devices such as HDD and SSD. Prior posting my problem here, i used this two ports as follows:
SATA connector 1 (where by default the optical drive is attached to):
here i placed the adapter cage from hardwrk (Link) and IN there i placed the old HDD, which was attached to SATA 2 before setting the MacBook up for SSD
SATA connector 2 (where by default the HDD is attached to; below the optical drive):
here i placed the new SSD
With this setup i did experience the problems with higher working temperature of the MacBook. After testing on software level, turning TRIM on or off had no effect to the high temperature, i decided to open up the MacBook another time. i checked all the wires and connectors, everything okay. Back turned on, same problem.
Then i decided to switch the devices. Means, SSD in adapter cage, HDD on the old place. Voila! Temperature problems are gone. Maybe you try this.
Hope it helps. Let me know!

Macbook Pro Extremely hot with NO cpu usage

I have a Macbook pro 15" (Mid-2010). Recently my mac is running extremly hot specially when connected to the AC power.
I'm using iStat Pro to monitor sensors, and while charging sometimes CPU reaches 101 degrees celsius. When I detach the power cord, it stays at about 80-85 degrees. My cpu usage is normal, about 1-4%. All the bottom of my mac feels hot, specially under the CPU, but the middle parts too. Fans are also working with highest speed.
Is it a known hardware problem?
Another problem which I've had around the same time, I use "Hardware Growler" to check for usb connections. When I connect a USB flash disk, sometimes it shows a lot of connections and disconnections for Keyboard, Trackpad, IR Remote and stuff. Pushing the usb around doesn't show the same symptom, so it's not a broken board or connector or something.
Have you seen a similar problem? What can I do?

I've solved my problem by resetting PRAM and SMC. I'm writing my solution here so others can try it if they have the same problems.
To reset PRAM, follow instructions in this link: http://support.apple.com/kb/ht1379
and to reset SMC, follow this link: http://support.apple.com/kb/ht3964
I think my problem started when I upgraded Parallels Desktop to version 7 (from version 6). I'm not sure if it was the cause, but some kernel extension in parallels could've corrupted SMC and/or PRAM.

Yoga - Thinkpad message receiver for shortcut hot keys and 30 % CPU usage after lock screen or sleep

Similar Messages

Maybe you are looking for