Yosemite 10.10.2 Update - Trackpad Not Working Properly
MBP OSX Yosemite 10.10.2
The following trackpad gestures no longer working since latest update - four finger mission control, app expose, launchpad, show desktop, two finger scroll in safari (although works in chrome).
The same symptoms on BT trackpad as on the internal trackpad.
All basic troubleshooting tried - reboot, turned all the gestures off and reboot etc etc
Please help
Go step by step and test.
1. Shut down the computer.
Clean the trackpad with moist not wet microfiber cloth.
System Preferences > Point & Click
Try turning off three finger dragging and then turning it on after testing.
2. Is there any Bluetooth device nearby with failing batteries? If so, replace the batteries.
3. Reset PRAM: http://support.apple.com/kb/PH14222
4. Reset SMC. http://support.apple.com/kb/HT3964
Choose the method for:
"Resetting SMC on portables with a battery you should not remove on your own".
5. Close all windows and quit all applications.
Click the Spotlight -the magnifying glass icon- in the menu bar. Enter Disk utility in the box.
Select Disk Utility from the drop down. When the Disk utility window opens up,
select Macintosh HD, then First Aid.
Click Repair Disk Section: "Try Disk Utility" Permissions button.
Ignore the time remaining estimate.
Last 1 minute may take longer.
Similar Messages
-
Trackpad Not Working Properly Following Upgrade to Windows 7
I recently did an in-place upgrade from Vista 32 bit to Windows 7 32 bit on my Lenovo T61p. I also updated all the Thinkvantage drivers and software and have been checking daily for additional updates. Following the upgrade I noticed that the trackpad is not working properly. When I'm typing an email message in Outlook 2007, the trackpad and buttons will not work in the body of the message. I can click on the icons in the ribbon, but nothing works in the body of the message. Same behaviour in MSWord 2007 and Excel 2007. I uninstalled and re-installed both the Ultranav drivers and software utility, using the Windows 7 32 bit versions posted on the Lenovo website, without any improvement.
I contacted Microsoft technical support and spent an hour on the phone with a Windows 7 technician. He concluded that the problem was with the trackpad driver and was Lenovo's responsibility to address. I then contacted Lenovo technical support and the technician said there was nothing he could do to help me. Disappointing response from both organizations. I've reverted back to the Windows PS2 mouse driver for the time being.
Any suggestions would be most appreciated. ThanksIn fact, the problem could be due to the installation of Client Security Solution 8.3 for Windows 7 (http://www-307.ibm.com/pc/support/site.wss/document.do?sitestyle=lenovo&lndocid=MIGR-73785). It has been discussed here: http://forums.lenovo.com/t5/Windows-7-Discussion/CSS-8-3-64-bit-WIN7-Office-2007-Mouse-issues/td-p/1...
-
My trackpad is not working properly. It keeps highlighting everything. I went into system preferences to check the settings, but nothing there. Can someone help?
http://support.apple.com/kb/ts1449
-
Trackpad not working properly mbp 13 inch 2011 (early)
My trackpad suddenly stopped working well more precisely is being erratic. When I move my finger across the pad the pointer is not moving and when it does move there seems to be a lag. The gestures are not working properly etc and the pointer would move on its own not by much but a little bit. I have tried SMC and PRAM and that has not helped. I attached an external mouse and was having problems with moving the pointer, however when I selected disable trackpad when external mouse is attached the external mouse worked just fine. All of my software is up todate I am running OSX 10.6.8. I hope I do not have to get another track pad the laptop is about 7 months old and I have an apple care plan but I am out of the US for the next couple of months so I am looking for fix I can do myself. Any help would be greatly appreciated
I am sure you have tried what Apple says in this article.
But cleaning the trackpad with a damp but not wet micro fiber cloth might help
until Apple Care can take care of the problem.
http://support.apple.com/kb/TS1449 -
Adobe desktop app updater is not working properly
Trying to update adobe desktop app but its giving me this popup
accept button ( which is in right side) is not working. When I press cancle button (left side button) getting another popup
I have no idea what to do...!!Well... that says that you must use an ADMINISTRATOR computer account, not a simple user account
http://forums.adobe.com/community/download_install_setup/creative_cloud_faq may help -
IOS 6 update = Speaker not working properly
My speaker was fine and I have no reason to believe there are any hardware issues. As soon as I updated my iOS 5.1.1 to the new iOS 6 it stopped working and now I can't listen to music or watch videos on my iPhone unless I insert a headphone!
What's happened and how can this be resolved?Experiencing similar problems with both me and my wife's iPhone 4S's. My phone's speaker was muffled until I played a song, then it seemed to work ok. My wife's will not work at all except for when you adjust sound settings (e.g. changing the alert sound). Then it works only during the "test" and reverts back to its broken state.
P.S. And yes, I've rebooted both numerous times. This has no obvious affect. -
Trackpad not working properly (yoga thinkpad)
Hi guys, I did a fresh install of windwos 10, my main problem is with the trackpad, things like gestures are not working.Any idea why I should do?
http://support.apple.com/kb/ts1449
-
Magic Trackpad not working properly since upgrade
Since I upgraded to Mountain Lion, my Magic Trackpad hasn't been working properly. Specifically, the 4 finger gesture to switch between full-screen apps and the 2 finger gesture to open Notifiction Center stop working after awhile. From what I can find out it seems to be connected to my iMac going into sleep mode. I have a feeling this is a bug that Apple needs to fix. Besides going through Restart or into Terminal Mode, is there anything else that can be done?
Thanks for the information. Unfortunately, I still have to restart the computer to do this and as soon as it goes to sleep again, I'll have the same problem.
-
After downloading new OS key pad not functioning
Properly. Type in message and it takes several seconds to populate.
Anyone else having same problem or solution?There are many other posts here on the forum about this same issue...use the SEARCH feature and I'm sure you'll locate your answer.
-
Photoshop after Latest CC updates is not working properly.
I just installed CC Photoshop's latest update and now I'm totally out of commision. Unable to work with any of my previous 3d projects. They appear to load, but as soon as you select any object, it falls apart. Objects go flat and rearrannged. When createing new objects, such as 3D extrusion fonts, they are flat. Cannot distinquich the front from the sides. There are no shadows. When you click an object, the background dissappears. When you try to move an object, it stutters and takes several seconds before the object moves. In regular Photoshop when editing a previous projectl, for example, when setting a paint brush on a given area, an error message pops up says "Could not use the brush tool because the current time is outside the range for the target layer. "Time"??? What is going on. Does anyone know if I can uninstall and revert back to a previous project. I've got work to do. This is devesating!! The list goes on. When trying to create a depth map from a plane object, you'll get an unknown error and cannot get out of it unless you kill it from the Task Manager. Please help!
I would think you would first check to see if your video card has driver updates. Check the card maker's website to be very sure. Upgrade to the most current.
If doing that does not fix it, then try this:
Dial back your GPU settings (Preferences > Performance) from Advanced to Basic.
If no luck, downgrade PS, if only to get your work done.
You can download the Photoshop CC installer direct from ProDesign Tools.
http://prodesigntools.com/adobe-cc-direct-download-links.html
Follow the instructions carefully or the download link won't work.
Uninstall your 14.2 version and using the downloaded CC installer, you should have 14.0.0
I never did this before, but under Help > Updates make sure you don't update past 14.1.2 -
My keyboard does not type at all and the trackpad not working properly
Hello everyone,
Today I realised that my computer does not type any letters at all and everytime I try to write something the trackpad works only as if I was pressing the right button (two fingers). After a while the trackpad starts to work again as it should. I have noticed that the trackpad does this when I try to write something. Don't know what to do and this macbook air is quite new and I cannot surf on the internet, write essays and I cannot log in with my password. Sometimes the only letter that works is the "o" and the others do not show up and it makes a sound. I have realised that if I press some of the other letters it can also erase some of the text already there.
Thank you in advance.
Kind regards.It sounds like you have a stuck key or some other malfunction.
Make a "Genius" appointment at an Apple Store, or go to another authorized service provider. You may have to leave the machine there for several days.
Back up all data on the internal drive(s) before you hand over your computer to anyone. There are ways to back up a computer that isn't fully functional—ask if you need guidance.
If privacy is a concern, erase the data partition(s) with the option to write zeros* (do this only if you have at least two complete, independent backups, and you know how to restore to an empty drive from any of them.) Don’t erase the recovery partition, if present.
Keeping your confidential data secure during hardware repair
Apple also recommends that you deauthorize a device in the iTunes Store before having it serviced.
*An SSD doesn't need to be zeroed. -
Edit/update function not working properly on visual basic 2012
help, i'm working on a update function on my aplication program using visual studio ultimate 2012 VB.
after i fixed the error on my coding, i debug the program with f5. but, when i tried to update the data on the datagridview it doesn't change even thought the messagebox "data has been updated" show up.
how do i fix this problem?
here is the coding for update function:
form1:
Private Sub Button1_Click(sender As Object, e As EventArgs) Handles Button1.Click
ClassSiswa.ubahdata(New SqlConnection, (txt_nis.Text), (txt_nisn.Text), (txt_namasiswa.Text), (cmb_kelaminsiswa.Text), (txt_kotalahir.Text), (DTP_siswa.Text), (cmb_agamasiswa.Text), (txt_beratsiswa.Text), (txt_tinggi_badan.Text))
datagridview()
End Sub
Private Sub UpdateDataSiswa()
ClassSiswa.Nis = txt_nis.Text
ClassSiswa.Nisn = txt_nisn.Text
ClassSiswa.Nama_Siswa = txt_namasiswa.Text
ClassSiswa.Tanggal_Lahir = DTP_siswa.Text
ClassSiswa.Jenis_Kelamin = cmb_kelaminsiswa.Text
ClassSiswa.Kota_Lahir = txt_kotalahir.Text
ClassSiswa.Agama = cmb_agamasiswa.Text
ClassSiswa.Tinggi_Badan = txt_tinggi_badan.Text
ClassSiswa.Berat_Badan = txt_beratsiswa.Text
ClassSiswa.Updatesiswa(ClassSiswa.opencon, (txt_nis.Text))
datagridview()
End Sub
classSiswa:
Public Shared Sub ubahdata(ByVal _cn As SqlClient.SqlConnection, ByVal _Nis As String, ByVal _Nisn As String, ByVal _nama_siswa As String, ByVal _jenis_kelamin As String, ByVal _kota_lahir As String, ByVal _tanggal_lahir As String, ByVal _agama As String, ByVal _berat_badan As String, ByVal tinggi_badan As String)
Dim sql As New SqlClient.SqlCommand
sql.Connection = _cn
sql.CommandType = CommandType.Text
sql.CommandText = "update siswa set nis='" & Nis & "',nisn='" & Nisn & "',nama_siswa='" & Nama_Siswa & "',jenis_kelamin='" & Jenis_Kelamin & "' ,kota_lahir='" & Kota_Lahir & "',tanggal_lahir='" & Tanggal_Lahir & "'agama='" & Agama & "'berat_badan='" & Berat_Badan & "',tinggi_badan='" & tinggi_badan & "'"
MessageBox.Show(" Data Telah Diupdate")
ClassSiswa.closecon()
End Sub
Public Shared Sub Updatesiswa(ByVal _Cn As SqlClient.SqlConnection, ByVal _nis As String)
Dim sql As SqlClient.SqlCommand
sql = New SqlClient.SqlCommand
sql.Connection = _Cn
sql.CommandType = CommandType.Text
sql.CommandText = "Update siswa Set nis = '" & Nis & "', nisn = '" & Nisn & "' where nis = '" & _nis & "'"
sql.ExecuteNonQuery()
End SubHello,
A DataGridView knows nothing about the updates done as shown above, you need to update any rows that have changed yourself. For example. lets say I loaded data from a database table into a DataTable, create a BindingSource and assign that DataTable as the
DataSource for the BindingSource. The BindingSource becomes the DataSource of the DataGridView so now when you moved up/down rows in the DataGridView you are changing position in the BindingSource and can read this data via BindingSource.Current by casting
Current to a DataRowView then access the Row property with Field(Of T or SetField(Of T. Couple this will logic to locate rows that may not be the current row and we still can use SetField(Of T)(Col,Value) to update data in the BindingSource which is then immediately
reflected in the DataGridView.
The following is for MS-Access but the same logic applies for SQL-Server database via SqlClient data provider rather than
OleDb data provider.
Please remember to mark the replies as answers if they help and unmark them if they provide no help, this will help others who are looking for solutions to the same or similar problem. Contact via my webpage under my profile
but do not reply to forum questions. -
Trackpad not working properly with google Chrome
Today, my trackpad has ceased to scroll up and down pages in Google Chrome. It works fine in safari and with applications, but today for no apparent reason it has stopped being able to scroll the Google Chrome browser. Wierd!
There is a history of problems with Google Chrome, Lion and to some degree, trackpads. You should ask your self how much you need Google Chrome which at best absorbs memory at a rate of knots. Look at 'More like this" to your right >>>
Many people take Chrome for the extentions available but again, from my experience, they are not always tested with Macs and conflict readily with each other.
Do some digging via Google and our forum search pages and you may be inclined to stick to Safari. -
RH_INSERT_INFTY in update mode not working properly
I am calling the FM RH_INSERT_INFTY using IN UPDATE TASK in my Inbound part of my IDOC.
The IDOC is getting generated successfully in the Outbound part but getting errorred out in the Inbound side.
I have checked for the attributes of the FM where the type of FM is NORMAL FUNCTION MODULE.
any pointers on this will be of immense help to me.This is the output of journalctl --all
May 12 20:55:04 egidiolaptop /usr/lib/gdm/gdm-x-session[19552]: Activating service name='org.gnome.Terminal'
May 12 20:55:04 egidiolaptop /usr/lib/gdm/gdm-x-session[19552]: Successfully activated service 'org.gnome.Terminal'
May 12 20:55:26 egidiolaptop gnome-session[19563]: 1431456926458 addons.update-checker WARN Update manifest for {972ce4c6-7e08-4474-a285-3208198ce6fd} did not contain an updates property
May 12 20:56:03 egidiolaptop systemd[19544]: [/home/egidio/.config/systemd/user/googledrive.service:2] Unknown lvalue 'Type' in section 'Unit'
May 12 20:56:03 egidiolaptop systemd[19544]: Cannot add dependency job for unit network-online.target, ignoring: Unit network-online.target failed to load: No such file or directory.
May 12 20:56:03 egidiolaptop systemd[19544]: Created slice -.slice.
May 12 20:56:03 egidiolaptop systemd[19544]: Starting -.slice.
May 12 20:56:03 egidiolaptop systemd[19544]: Started Google Drive mount.
May 12 20:56:03 egidiolaptop systemd[19544]: Starting Google Drive mount...
May 12 20:56:03 egidiolaptop fusermount[20547]: /usr/bin/fusermount: failed to unmount /home/egidio/Google Drive: Device or resource busy
May 12 20:56:03 egidiolaptop systemd[19544]: googledrive.service: control process exited, code=exited status=1
May 12 20:56:03 egidiolaptop systemd[19544]: Unit googledrive.service entered failed state.
May 12 20:56:03 egidiolaptop systemd[19544]: googledrive.service failed. -
Update/restore not working properly
My wife and I have been trying to get her iPhone 4S to update to the latest version of iOS. The problem is that the software update server appears to be running at the approximate speed of a glacier -- I have been trying to download the update (a 1.66 GB download) for the last three hours, and every time I do it downloads at about 30 KB per second and tells me there is still 24 to 25 hours remaining. I have checked and rechecked, and there is NO possibility of a bottleneck on my end -- no interference from firewalls or antivirus software -- but in spite of this the download always crashes with an Error 9006, WHICH IT SHOULD NOT BE DOING.
Are the servers just completely screwed tonight? Is there a solution I haven't figured out yet? I assure you, I've tried about everything that can be tried.I would suggest that you hook up the phone to iTunes on the computer you sync with and update that way. It is faster and requires less memory to do the update.
Cheers,
GB
Maybe you are looking for
-
Can I recover notes that were deleted upon the removal of an email account?
I recently deleted the e-mail account of a prior employer to which was associated most of my notes in the Note app. I had no idea that notes were even associated with each email account, but now about 50% of what I was using is simply gone. Ironica
-
Are TableSpace names stored in the tables?
Are TableSpace names stored in the tables? If so, which one?
-
Why is The iTunes Library Extras.itdb file locked?
After my walk this morning I tried to connect up to iTunes to chargemy ipod and update my tunes and got an error message: "The iTunes Library.itdb file is locked, on a locked disc, or you do not have write permission for this file." WHY WHY WHY ???
-
LMS 3.2 DFM and PPP interface traps
Hello, I have a problems with traps from PPP links. Traps are corectly send from device, LMS server receive traps, but these traps are not displayed in DFM. I'm using SNMPv2c (SNMPv3 doesn't work properly). Information about link down is corectly dip
-
Import music from windows media player to itunes
I can't import my mp3 files from window media player to my ipod. Can anyone tell me in detail how this is done?