Yosemite and auto startup (boot)

Hello,
In Yosemite when I open the lid the Mac turns on automatically (not from a sleep but from a shutdown).
Is this a new feature?
Thanks,
X

I have a MacBook Pro with a self-made Fusion Drive.
Means, there is an OptiBay in place where the SuperDrive used to be, containing the HDD.
The main storage medium is a 128 GB SSD.
Both are fused together.
Now, when I put my Mac to sleep, after some time when I wake it up, I will find it sitting at the login window, as if it had rebooted during sleep.
And yes, after login I do get a kernel panic report.
Strangely, this happens every time I close the MacBook Pro to have it sleep while attached to power cord.
When I remove the power cord before putting it to sleep, this won't happen. it will then just wake up perfectly from where I left it.
So, this might be related to:
• Self-made Fusion Drive
• Yosemite
• Power source
either one of those, or a combination of some or all these possible causes.

Similar Messages

  • 16 mo young Mac Pro will not turn on. Dead. Why. No problems ever! Installed Yosemite and did not boot up after. Did that kill it? To young to die. What

    16 mo young Mac Pro will not turn on. Dead. Why. No problems ever! Installed Yosemite and did not boot up after. Did that kill it? To young to die. What happened?what do I do now??????? Help!

    Note that you don't have a Mac Pro as stated. Your profile says you have a MacBook Pro. Please clarify as they are entirely different computers. If nothing below works for you, then make a Genius Appointment and take it in for service.
    Try these in order testing your system after each to see if it's back to normal:
    1. a. Resetting your Mac's PRAM and NVRAM
        b. Intel-based Macs: Resetting the System Management Controller (SMC)
    2. Restart the computer in Safe Mode, then restart again, normally. If this doesn't help, then:
         Boot to the Recovery HD: Restart the computer and after the chime press and hold down the
         COMMAND and R keys until the Utilities menu screen appears. Alternatively, restart the
         computer and after the chime press and hold down the OPTION key until the boot manager
         screen appears. Select the Recovery HD and click on the downward pointing arrow button.
    3. Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the Utilities menu. Repair the Hard Drive and Permissions as follows.
    When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu. Select Restart from the Apple menu.
    4. Reinstall Yosemite: Reboot from the Recovery HD. Select Reinstall OS X from the Utilities menu, and click on the Continue button.
    Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.

  • Yosemite and auto start

    Does anyone know how to to set up an application to auto start on boot up?
    Doesn’t seem to work in Yosemite….you set it up….but when it reboots nothing changes
    Thanks for any help
    Marilyn

    Go to System Preferences > Users > [your username], tap on Login Items in the right pane. If the app you want to load isn't listed, you can click the "+", navigate to the app and tap "Add". Is this the procedure you are following?

  • I have downloaded OS X Yosemite using recovery from boot but while installing error occuring showing unable to extract essential.pkg so can't install. problem is i have already formatted my drive and dont have any os right now. please help

    i have downloaded OS X Yosemite using recovery from boot but while installing error occuring showing unable to extract essential.pkg so can't install. problem is i have already formatted my drive and dont have any os right now. only the downloaded new os x yosemite in the os x base system. please help

    Please try again after taking each of the following steps that you haven't already taken.
    Step 1
    Reset your computer’s PRAM.
    Step 2
    If your model has user-replaceable memory, and you've upgraded the memory modules, reinstall the original memory and see whether there's any improvement. Be careful not to touch the gold contacts. Clean them with a mild solvent such as rubbing alcohol. Aftermarket memory must exactly match the technical specifications of the machine.
    Step 3
    Back up all data to at least two different storage devices, if you haven't already done so. One backup is not enough to be safe. The backups can be made with Time Machine or with Disk Utility. Preferably both.
    Erase and install OS X. This operation will destroy all data on the startup volume, so you had be better be sure of the backups.
    Step 4
    Make a "Genius" appointment at an Apple Store, or go to another authorized service provider to have the machine tested.

  • Yosemite and Bootcamp Windows 7 booting problem

    Hello all,
    I upgraded to Yosemite from Mavericks from the App store on a MBP 2013 late which also had windows 7 installed on it using bootcamp.
    I can boot into Yosemite and Windows 7 by going to start up disk and selecting the OS and then restarting but what I cannot do is use the option key to show me the boot disk options when I power on like how I used to do before the upgrade.
    Is it the same for all, is there any work around or am I doing something wrong here ?
    Thanks in advance.
    Priyank.

    What about booting into safe mode and then uninstalling the app?
    Arnav Sharma | http://arnavsharma.net/ Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading
    the thread.

  • Can I switch out a hard drive for an SSD without having to clone the existing hard drive, and then install Yosemite from an USB Boot Drive onto the new SSD?

    Can I simply replace a hard drive with a new SSD and just install Yosemite from a USB boot drive onto the SSD? I recently bought a used MBP and it has absolutely no files on it except for the OS, and so I'm assuming I don't need to clone the current hard drive as I can just reinstall the OS onto the new SSD.

    Honey_Revenge wrote:
    Thanks.
    Just a quick follow up question, is formatting the SSD with HFS+ done in Disk Utility?...
    It's possible that the SSD will be set up for use on a PC, which means it will have a Master Boot Record partition table rather than a GUID Partition Table, which is what Yosemite needs. In Disk Utility, select the SSD and click the Partition button. Create a new Partition Layout and click the Options... button at the bottom. You'll likely see MBR is selected. Choose GUID instead and Mac OS Extended (Journaled) for the Format.

  • OSX 10.6 .8 -- Firefox automatically starts when I boot up (MacBook Pro Intel). It is not in the Startup Items in System Preferences, and automatic startup is not checked in Firefox Options. Don't know where else to look.

    How do I keep Firefox automatically starts when I boot up (OSX 10.6 .8 -- MacBook Pro Intel). It is not in the Startup Items in System Preferences, and automatic startup is not checked in Firefox Options.

    Hi fullrun-
    Once Firefox is open, you should be able to open the Right click context menu on the icon. From there you select 'Options' and then de-select 'Open at Login'. Hope that helps.

  • My mac mini v10.6.8 wont finish installation of update Yosemite and now im stock at boot :( Please help!!

    My mac mini v10.6.8 wont finish installation of update Yosemite and now im stock at boot Please help!!

    Try stating in Safe Mode:
    OS X: What is Safe Boot, Safe Mode?
    Next try reinstalling Yosemite by:
    Disabled
    Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
    iOS: Forgot passcode or device disabled
    If recovery mode does not work try DFU mode.                        
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings        
    For how to restore:                                                             
    iTunes: Restoring iOS software
    To restore from backup see:
    iOS: Back up and restore your iOS device with iCloud or iTunes       
    If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
    You can redownload most iTunes purchases by:                         
    Downloading past purchases from the App Store, iBookstore, and iTunes Store        
    If problem what happens or does not happen and when in the instructions? When you successfully get the iPod in recovery mode and connect to computer iTunes should say it found an iPod in recovery mode.

  • No boot and no startup chime

    Hi,
    I have a late 2009 Mac mini and yesterday I decided to install Ubuntu on a bootcamp partition which I created in Mac OS X. However, the Ubuntu installation failed for some reason and when I went to restart my Mac mini made one solid beep for about 2 seconds. This beep only sounds on occational boots but the Mac mini never shows any picture on my monitor and the startup chime never sounds either. I can hear the hard disk spinning up without making any abnormal sounds and the super drive works because it ejected my Ubuntu disk when I first rebooted to find this problem. The power LED does come on.
    I have had look around on the internet and the apple site says that 1 beep means that there is no RAM installed. But, there is and I know that it works because I have tested it in my 2010 Mac mini. The Mac mini does not post far enough to enable the keyboard and so I have been unable to try and reset the PRAM and the SMC. Although, I have managed to reset the EFI (I think) by pressing and holding the power button until the LED flashes and the Mac mini restarts.
    I would really appreciate any help as I need this machine.
    Many thanks,
    Connor

    Dead On Arrival (DOA) Product: System Failure Out of the Box
    An Apple-branded hardware product is considered DOA if it shows symptoms of a hardware failure, preventing basic operability, when you first use it after opening the box. If you believe that your product is DOA, please call AppleCare Technical Support at 1-800-APL-CARE (1-800-275-2273) within 30 calendar days of the invoice date. AppleCare Technical Support will determine whether the product is DOA and offer you the following options:
    Replacement: Apple, at its expense, will ship another of the same product. AppleCare Technical Support will put you in touch with an Apple Store Customer Service Representative who will arrange for replacement and the DOA product’s return.
    Service: You may have the product repaired. However, once you choose that option, you may not request replacement of the product.
    If AppleCare Technical Support determines that a returned product is not DOA, Apple will apply Apple’s standard product warranty to the product. Further, if AppleCare determines that you have misrepresented a returned product’s condition and that the product is not DOA, Apple may impose a $400 handling fee.
    This DOA policy applies only to Apple-branded hardware products currently offered at the Apple Store. As new products are offered, Apple reserves the right to determine whether or not this policy applies. This DOA policy does not apply to third-party products that do not bear the Apple brand name. You must call the manufacturer directly with any third-party product issues.

  • My Mid 2007 24" iMac has been a bit laggy on Yosemite and getting worse every day, so I went to the Apple Support pages on Apples website looking for help and thought I'd found some. This is what I did and it made everything 100 times worse :(

    So here is what I found and what I did to try to alleviate the RAM eating upgrade named Yosemite. This guy has helped quite a few people, you can read all the comments and I gave it several tries this morning.
    Oct 23, 2014 10:59 AM
    I post this hoping to help those users who, like me, are experiencing high CPU usage and massive memory leaking with OS X core services and apps, leading to slow performance and battery drain.
    I've tried everything mentioned, but found the right combination of steps to follow. I've tried this with seven different Apple computers, including mine, and has worked well so far. I applied this method yesterday to give these process a 24 hour window to fail again, so far everything good.
    First step: disconnect any external or secondary monitors, if any is present. The video memory allocation leak can also happen if you have a system with an integrated card, like Intel, with no external monitors attached.
    Second step: Shut down your machine and enter Safe Mode (press shift once you turn on your computer again, more info below). Once you're there, fix your disk permissions.
    Guide of how to access Safe Mode: OS X: What is Safe Boot, Safe Mode?
    Third step: From Safe Mode turn off your machine again and reset your System Management Controller (SMC). There are different methods, depending on machine, to do this. To know what method applies to yours read the following guide.
    Intel-based Macs: Resetting the System Management Controller (SMC)
    Fourth step: Once your machine completes a full boot after resetting the SMC turn it off again and reset your PRAM (THIS IS THE MOST IMPORTANT STEP, BUT THE PREVIOUS ONES ARE ESSENTIAL FOR THIS ONE TO WORK). The PRAM stores small bits of data that indicate our Apple computer how to interact with the devices connected to it, including monitors and video cards. It also affects software.
    To reset it you should hold the OPTION, COMMAND, P and R keys in your keyboard immediately after turning on your machine again.You'll hear the start up chime, continue pressing the keys until the machine boots and the chime starts A SECOND TIME, then release. IF YOUR YOSEMITE INSTALLATION LOCKS UP AT A BLACK SCREEN AFTER THIS, DONT PANIC! It's normal, just turn off your computer and let it boot again.
    More info about PRAM: OS X Mavericks: Reset your computer’s PRAM
    Voila, reconnect your external displays and enjoy your system.
    Message was edited by: Luis_Mercado
    MacBook Air, OS X Yosemite (10.10)
    So here is my EtreCheck report that is a bit above my head but anything in red isn't good I'm sure. I'd really appreciate some friendly advice
    EtreCheck version: 2.0.11 (98)
    Report generated  at
    Hardware Information: ℹ️
      iMac (24-inch Mid 2007) (Verified)
      iMac - model: iMac7,1
      1 2.4 GHz Intel Core 2 Duo CPU: 2-core
      6 GB RAM Upgradeable
      BANK 0/DIMM0
      4 GB DDR2 SDRAM 667 MHz ok
      BANK 1/DIMM1
      2 GB DDR2 SDRAM 667 MHz ok
      Bluetooth: Old - Handoff/Airdrop2 not supported
      Wireless:  en1: 802.11 a/b/g/n
    Video Information: ℹ️
      ATI,RadeonHD2600 - VRAM: 256 MB
      iMac 1920 x 1200
    System Software: ℹ️
      OS X 10.10 (14A389) - Uptime: 2:34:25
    Disk Information: ℹ️
      WDC WD3200AAJS-40RYA0 disk0 : (320.07 GB)
      S.M.A.R.T. Status: Verified
      EFI (disk0s1) <not mounted> : 210 MB
      Data (disk0s2) /  [Startup]: 319.21 GB (230.04 GB free)
      Recovery HD (disk0s3) <not mounted>  [Recovery]: 650 MB
    USB Information: ℹ️
      VIA Labs, Inc. USB2.0 Hub
      Generic USB Storage
      Western Digital My Passport 0824 2 TB
      S.M.A.R.T. Status: Verified
      EFI (disk2s1) <not mounted> : 210 MB
      Passport Slim (disk2s2) /Volumes/Passport Slim : 2.00 TB (1.62 TB free)
      VIA Labs, Inc. USB2.0 Hub
      Apple Inc. Built-in iSight
      Apple Inc. Bluetooth USB Host Controller
      Logitech USB Receiver
      Apple Computer, Inc. IR Receiver
    Firewire Information: ℹ️
      WD Passport III 800mbit - 800mbit max
      S.M.A.R.T. Status: Verified
      EFI (disk1s1) <not mounted> : 210 MB
      Passport (disk1s2) /Volumes/Passport : 499.76 GB (370.05 GB free)
    Gatekeeper: ℹ️
      Anywhere
    Kernel Extensions: ℹ️
      /Library/Extensions
      [not loaded] com.lge.driver.LGAndroidmdmcontrol (4.15 - SDK 10.10) Support
      [not loaded] com.lge.driver.LGAndroidmdmdata (4.15 - SDK 10.10) Support
      [not loaded] com.lge.driver.LGAndroidndiscontrol (4.15 - SDK 10.10) Support
      [not loaded] com.lge.driver.LGAndroidndisdata (4.15 - SDK 10.10) Support
      [not loaded] com.lge.driver.LGAndroidrndis (4.15 - SDK 10.10) Support
      [not loaded] com.lge.driver.LGAndroidserial (4.15 - SDK 10.10) Support
      [not loaded] com.lge.driver.LGAndroidusbbus (4.15 - SDK 10.10) Support
      /System/Library/Extensions
      [not loaded] com.devguru.driver.SamsungComposite (1.4.26 - SDK 10.6) Support
      [not loaded] com.markspace.iokit.IOMissingSyncMassStorage (199) Support
      [not loaded] com.markspace.missingsync.palmos.classicseize (1) Support
      [not loaded] com.microsoft.driver.MicrosoftKeyboard (6.3) Support
      [not loaded] com.microsoft.driver.MicrosoftMouse (8.2) Support
      [not loaded] com.palm.ClassicNotSeizeDriver (3.2.1) Support
      [loaded] com.wdc.driver.1394.64.10.9 (1.0.1 - SDK 10.9) Support
      [not loaded] com.wdc.driver.1394HP (1.0.5) Support
      [loaded] com.wdc.driver.USB.64.10.9 (1.0.1 - SDK 10.9) Support
      [not loaded] com.wdc.driver.USBHP (1.0.1) Support
      /System/Library/Extensions/MicrosoftKeyboard.kext/Contents/PlugIns
      [not loaded] com.microsoft.driver.MicrosoftKeyboardBluetooth (6.3) Support
      [not loaded] com.microsoft.driver.MicrosoftKeyboardUSB (6.3) Support
      /System/Library/Extensions/MicrosoftMouse.kext/Contents/PlugIns
      [not loaded] com.microsoft.driver.MicrosoftMouseBluetooth (8.2) Support
      [not loaded] com.microsoft.driver.MicrosoftMouseUSB (8.2) Support
      /System/Library/Extensions/ssuddrv.kext/Contents/PlugIns
      [not loaded] com.devguru.driver.SamsungACMControl (1.4.26 - SDK 10.6) Support
      [not loaded] com.devguru.driver.SamsungACMData (1.4.26 - SDK 10.6) Support
      [not loaded] com.devguru.driver.SamsungMTP (1.4.26 - SDK 10.5) Support
      [not loaded] com.devguru.driver.SamsungSerial (1.4.26 - SDK 10.6) Support
    Startup Items: ℹ️
      Cocktail: Path: /Library/StartupItems/Cocktail
      Startup items are obsolete and will not work in future versions of OS X
    Problem System Launch Agents: ℹ️
      [failed] com.apple.security.cloudkeychainproxy.plist
    Problem System Launch Daemons: ℹ️
      [failed] com.apple.ctkd.plist
      [failed] com.apple.ifdreader.plist
      [failed] com.apple.nehelper.plist
      [failed] com.apple.nsurlsessiond.plist
      [failed] com.apple.softwareupdated.plist
      [failed] com.apple.wdhelper.plist
    Launch Agents: ℹ️
      [loaded] com.google.keystone.agent.plist Support
      [loaded] com.hp.help.tocgenerator.plist Support
      [not loaded] com.maintain.LogOut.plist Support
      [loaded] com.maintain.PurgeInactiveMemory.plist Support
      [not loaded] com.maintain.Restart.plist Support
      [not loaded] com.maintain.ShutDown.plist Support
      [not loaded] com.maintain.Sleep.plist Support
      [running] com.maintain.SystemEvents.plist Support
      [loaded] com.oracle.java.Java-Updater.plist Support
      [invalid?] com.tvmobili.artwork.plist Support
      [running] com.wdc.raidmanagerstatusmenu.plist Support
    Launch Daemons: ℹ️
      [loaded] com.adobe.fpsaud.plist Support
      [running] com.bjango.istatserver.plist Support
      [loaded] com.google.keystone.daemon.plist Support
      [loaded] com.hp.lightscribe.plist Support
      [loaded] com.maintain.CocktailScheduler.plist Support
      [loaded] com.maintain.HideSpotlightMenuBarIcon.plist Support
      [loaded] com.oracle.java.Helper-Tool.plist Support
      [loaded] com.oracle.java.JavaUpdateHelper.plist Support
      [invalid?] com.tvmobili.tvmobilisvcd.plist Support
      [running] com.wdc.WDRAIDDriveService.plist Support
      [loaded] com.westerndigital.WD-Drive-Manager-Installer.plist Support
      [loaded] net.freemacsoft.LiteIcon.LIHelperTool.plist Support
    User Launch Agents: ℹ️
      [loaded] com.adobe.ARM.[...].plist Support
      [loaded] com.maintain.ShowUserLibraryDirectory.plist Support
      [loaded] uk.co.markallan.clamxav.freshclam.plist Support
    User Login Items: ℹ️
      Macs Fan Control Application (/Applications/Macs Fan Control.app)
      Solar Service Application (/Users/[redacted]/Library/Application Support/Logitech/SolarService/Solar Service.app)
      Android File Transfer Agent Application (/Users/[redacted]/Library/Application Support/Google/Android File Transfer/Android File Transfer Agent.app)
      WDDriveUtilityHelper Application (/Applications/WD Drive Utilities.app/Contents/WDDriveUtilityHelper.app)
      WD Quick View UNKNOWN (missing value)
    Internet Plug-ins: ℹ️
      Unity Web Player: Version: UnityPlayer version 2.0.2f2 Support
      Default Browser: Version: 600 - SDK 10.10
      Flip4Mac WMV Plugin: Version: 2.4.2.4 Support
      OfficeLiveBrowserPlugin: Version: 12.3.6 Support
      RealPlayer Plugin: Version: Unknown
      Silverlight: Version: 5.1.30514.0 - SDK 10.6 Support
      FlashPlayer-10.6: Version: 15.0.0.223 - SDK 10.6 Support
      DivXBrowserPlugin: Version: 1.4 Support
      Flash Player: Version: 15.0.0.223 - SDK 10.6 Support
      QuickTime Plugin: Version: 7.7.3
      iPhotoPhotocast: Version: 7.0
      AdobePDFViewer: Version: 9.5.5 Support
      JavaAppletPlugin: Version: Java 7 Update 71 Check version
    3rd Party Preference Panes: ℹ️
      Flash Player  Support
      Java  Support
      Microsoft Mouse  Support
      MusicManager  Support
    Time Machine: ℹ️
      Skip System Files: NO
      Mobile backups: ON
      Auto backup: NO - Auto backup turned off
      Volumes being backed up:
      Data: Disk size: 319.21 GB Disk used: 89.17 GB
      Destinations:
      Passport [Local]
      Total size: 499.76 GB
      Total number of backups: 25
      Oldest backup: 2014-05-10 16:56:40 +0000
      Last backup: 2014-11-14 17:38:44 +0000
      Size of backup disk: Adequate
      Backup size 499.76 GB > (Disk used 89.17 GB X 3)
    Top Processes by CPU: ℹ️
          3% WindowServer
          1% Google Chrome Canary
          1% coreaudiod
          0% systemstatsd
          0% ps
    Top Processes by Memory: ℹ️
      174 MB Google Chrome Canary
      84 MB Google Chrome Helper
      64 MB mds_stores
      52 MB Finder
      45 MB iconservicesagent
    Virtual Memory Information: ℹ️
      3.02 GB Free RAM
      1.69 GB Active RAM
      317 MB Inactive RAM
      753 MB Wired RAM
      8.69 GB Page-ins
      156 MB Page-outs
    I hope to hear from anyone even to knock me in the head, lol. Thanks in advance and I'll be around trying to figure this out.

    1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem. But with the aid of the test results, the solution may take a few minutes, instead of hours or days.
    Don't be put off by the complexity of these instructions. The process is much less complicated than the description. You do harder tasks with the computer all the time.
    2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. Backup is always a must, and when you're having any kind of trouble with the computer, you may be at higher than usual risk of losing data, whether you follow these instructions or not.
    There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
    3. Below are instructions to run a UNIX shell script, a type of program. As I wrote above, it changes nothing. It doesn't send or receive any data on the network. All it does is to generate a human-readable report on the state of the computer. That report goes nowhere unless you choose to share it. If you prefer, you can act on it yourself without disclosing the contents to me or anyone else.
    You should be wondering whether you can believe me, and whether it's safe to run a program at the behest of a stranger. In general, no, it's not safe and I don't encourage it.
    In this case, however, there are a couple of ways for you to decide whether the program is safe without having to trust me. First, you can read it. Unlike an application that you download and click to run, it's transparent, so anyone with the necessary skill can verify what it does.
    You may not be able to understand the script yourself. But variations of the script have been posted on this website thousands of times over a period of years. The site is hosted by Apple, which does not allow it to be used to distribute harmful software. Any one of the millions of registered users could have read the script and raised the alarm if it was harmful. Then I would not be here now and you would not be reading this message.
    Nevertheless, if you can't satisfy yourself that these instructions are safe, don't follow them. Ask for other options.
    4. Here's a summary of what you need to do, if you choose to proceed:
    ☞ Copy a line of text in this window to the Clipboard.
    ☞ Paste into the window of another application.
    ☞ Wait for the test to run. It usually takes a few minutes.
    ☞ Paste the results, which will have been copied automatically, back into a reply on this page.
    The sequence is: copy, paste, wait, paste again. You don't need to copy a second time. Details follow.
    5. You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode, under the conditions in which the problem is reproduced. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
    6. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
    7. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in the browser window, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
    Triple-click anywhere in the line of text below on this page to select it:
    PATH=/usr/bin:/bin:/usr/sbin:/sbin:/usr/libexec;clear;cd;p=(Software Hardware Memory Diagnostics Power FireWire Thunderbolt USB Fonts SerialATA 4 1000 25 5120 KiB/s 1024 85 \\b%% 20480 1 MB/s 25000 ports ' com.clark.\* \*dropbox \*genieo\* \*GoogleDr\* \*k.AutoCAD\* \*k.Maya\* vidinst\* ' DYLD_INSERT_LIBRARIES\ DYLD_LIBRARY_PATH -86 "` route -n get default|awk '/e:/{print $2}' `" 25 N\\/A down up 102400 25600 recvfrom sendto CFBundleIdentifier 25 25 25 1000 MB ' com.adobe.AAM.Updater-1.0 com.adobe.AdobeCreativeCloud com.adobe.CS4ServiceManager com.adobe.CS5ServiceManager com.adobe.fpsaud com.adobe.SwitchBoard com.apple.aelwriter com.apple.AirPortBaseStationAgent com.apple.FolderActions.enabled com.apple.FolderActions.folders com.apple.installer.osmessagetracing com.apple.mrt.uiagent com.apple.ReportCrash.Self com.apple.rpmuxd com.apple.SafariNotificationAgent com.apple.usbmuxd com.google.keystone.agent com.google.keystone.daemon com.microsoft.office.licensing.helper com.oracle.java.Helper-Tool com.oracle.java.JavaUpdateHelper ' ' 879294308 461455494 3627668074 1083382502 1274181950 1855907737 1848501757 464843899 3694147963 1417519526 1233118628 2456546649 2806998573 2778718105 2636415542 842973933 3301885676 891055588 998894468 695903914 4136085286 ' 51 5120 files );N5=${#p[@]};p[N5]=` networksetup -listnetworkserviceorder|awk ' NR>1 { sub(/^\([0-9]+\) /,"");n=$0;getline;} $NF=="'${p[26]}')" { sub(/.$/,"",$NF);print n;exit;} ' `;f=('\n%s: %s\n' '\n%s\n\n%s\n' '\nRAM details\n%s\n' %s\ %s '%s\n-\t%s\n' );S0() { echo ' { q=$NF+0;$NF="";u=$(NF-1);$(NF-1)="";gsub(/^ +| +$/,"");if(q>='${p[$1]}') printf("%s (UID %s) is using %s '${p[$2]}'",$0,u,q);} ';};s=(' s/[0-9A-Za-z._]+@[0-9A-Za-z.]+\.[0-9A-Za-z]{2,4}/EMAIL/g;/faceb/s/(at\.)[^.]+/\1NAME/g;/\/Shared/!s/(\/Users\/)[^ /]+/\1USER/g;s/[-0-9A-Fa-f]{22,}/UUID/g;' ' s/^ +//;/de: S|[nst]:/p;' ' {sub(/^ +/,"")};/er:/;/y:/&&$2<'${p[10]} ' 1s/://;3,6d;/[my].+:/d;s/^ {4}//;H;${ g;s/\n$//;/s: (E[^m]|[^EO])|x([^08]|02[^F]|8[^0])/p;} ' ' 5h;6{ H;g;/P/!p;} ' ' ($1~/^Cy/&&$3>'${p[11]}')||($1~/^Cond/&&$2!~/^N/) ' ' /:$/{ N;/:.+:/d;s/ *://;b0'$'\n'' };/^ *(V.+ [0N]|Man).+ /{ s/ 0x.... //;s/[()]//g;s/(.+: )(.+)/ (\2)/;H;};$b0'$'\n'' d;:0'$'\n'' x;s/\n\n//;/Apple[ ,]|Genesy|Intel|SMSC/d;s/\n.*//;/\)$/p;' ' s/^.*C/C/;H;${ g;/No th|pms/!p;} ' '/= [^GO]/p' '{$1=""};1' ' /Of/!{ s/^.+is |\.//g;p;} ' ' $0&&!/ / { n++;print;} END { if(n<10) print "com.apple.";} ' ' { sub(/ :/,"");print|"tail -n'${p[12]}'";} ' ' NR==2&&$4<='${p[13]}' { print $4;} ' ' END { $2/=256;if($2>='${p[15]}') print int($2) } ' ' NR!=13{next};{sub(/[+-]$/,"",$NF)};'"`S0 21 22`" 'NR!=2{next}'"`S0 37 17`" ' NR!=5||$8!~/[RW]/{next};{ $(NF-1)=$1;$NF=int($NF/10000000);for(i=1;i<=3;i++){$i="";$(NF-1-i)="";};};'"`S0 19 20`" 's:^:/:p' '/\.kext\/(Contents\/)?Info\.plist$/p' 's/^.{52}(.+) <.+/\1/p' ' /Launch[AD].+\.plist$/ { n++;print;} END { if(n<200) print "/System/";} ' '/\.xpc\/(Contents\/)?Info\.plist$/p' ' NR>1&&!/0x|\.[0-9]+$|com\.apple\.launchctl\.(Aqua|Background|System)$/ { print $3;} ' ' /\.(framew|lproj)|\):/d;/plist:|:.+(Mach|scrip)/s/:[^:]+//p ' '/^root$/p' ' !/\/Contents\/.+\/Contents|Applic|Autom|Frameworks/&&/Lib.+\/Info.plist$/ { n++;print;} END { if(n<1100) print "/System/";} ' '/^\/usr\/lib\/.+dylib$/p' ' /Temp|emac/{next};/(etc|Preferences|Launch[AD].+)\// { sub(".(/private)?","");n++;print;} END { split("'"${p[41]}"'",b);split("'"${p[42]}"'",c);for(i in b) print b[i]".plist\t"c[i];if(n<500) print "Launch";} ' ' /\/(Contents\/.+\/Contents|Frameworks)\/|\.wdgt\/.+\.([bw]|plu)/d;p;' 's/\/(Contents\/)?Info.plist$//;p' ' { gsub("^| |\n","\\|\\|kMDItem'${p[35]}'=");sub("^...."," ") };1 ' p '{print $3"\t"$1}' 's/\'$'\t''.+//p' 's/1/On/p' '/Prox.+: [^0]/p' '$2>'${p[43]}'{$2=$2-1;print}' ' BEGIN { i="'${p[26]}'";M1='${p[16]}';M2='${p[18]}';M3='${p[31]}';M4='${p[32]}';} !/^A/{next};/%/ { getline;if($5<M1) a="user "$2"%, system "$4"%";} /disk0/&&$4>M2 { b=$3" ops/s, "$4" blocks/s";} $2==i { if(c) { d=$3+$4+$5+$6;next;};if($4>M3||$6>M4) c=int($4/1024)" in, "int($6/1024)" out";} END { if(a) print "CPU: "a;if(b) print "I/O: "b;if(c) print "Net: "c" (KiB/s)";if(d) print "Net errors: "d" packets/s";} ' ' /r\[0\] /&&$NF!~/^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./ { print $NF;exit;} ' ' !/^T/ { printf "(static)";exit;} ' '/apsd|BKAg|OpenD/!s/:.+//p' ' (/k:/&&$3!~/(255\.){3}0/ )||(/v6:/&&$2!~/A/ ) ' ' $1~"lR"&&$2<='${p[25]}';$1~"li"&&$3!~"wpa2";' ' BEGIN { FS=":";p="uniq -c|sed -E '"'s/ +\\([0-9]+\\)\\(.+\\)/\\\2 x\\\1/;s/x1$//'"'";} { n=split($3,a,".");sub(/_2[01].+/,"",$3);print $2" "$3" "a[n]$1|p;b=b$1;} END { close(p);if(b) print("\n\t* Code injection");} ' ' NR!=4{next} {$NF/=10240} '"`S0 27 14`" ' END { if($3~/[0-9]/)print$3;} ' ' BEGIN { L='${p[36]}';} !/^[[:space:]]*(#.*)?$/ { l++;if(l<=L) f=f"\n   "$0;} END { F=FILENAME;if(!F) exit;if(!f) f="\n   [N/A]";"cksum "F|getline C;split(C, A);C="checksum "A[1];"file -b "F|getline T;if(T!~/^(AS.+ (En.+ )?text(, with v.+)?$|(Bo|PO).+ sh.+ text ex|XM)/) F=F" ("T", "C")";else F=F" ("C")";printf("\nContents of %s\n%s\n",F,f);if(l>L) printf("\n   ...and %s more line(s)\n",l-L);} ' ' s/^ ?n...://p;s/^ ?p...:/-'$'\t''/p;' 's/0/Off/p' ' END{print NR} ' ' /id: N|te: Y/{i++} END{print i} ' ' / / { print "'"${p[28]}"'";exit;};1;' '/ en/!s/\.//p' ' NR!=13{next};{sub(/[+-M]$/,"",$NF)};'"`S0 39 40`" ' $10~/\(L/&&$9!~"localhost" { sub(/.+:/,"",$9);print $1": "$9|"sort|uniq";} ' '/^ +r/s/.+"(.+)".+/\1/p' 's/(.+\.wdgt)\/(Contents\/)?Info\.plist$/\1/p' 's/^.+\/(.+)\.wdgt$/\1/p' ' /l: /{ /DVD/d;s/.+: //;b0'$'\n'' };/s: /{ /V/d;s/^ */- /;H;};$b0'$'\n'' d;:0'$'\n'' x;/APPLE [^:]+$/d;p;' ' /^find: /d;p;' "`S0 44 45`" ' BEGIN{FS="= "} /Path/{print $2} ' ' /^ *$/d;s/^ */   /;' ' s/^.+ |\(.+\)$//g;p ' '/\.(appex|pluginkit)\/Contents\/Info\.plist$/p' ' /2/{print "WARN"};/4/{print "CRITICAL"};' 's/^.+: //p' );c1=(system_profiler pmset\ -g nvram fdesetup find syslog df vm_stat sar ps sudo\ crontab sudo\ iotop top pkgutil 'PlistBuddy 2>&1 -c "Print' whoami cksum kextstat launchctl sudo\ launchctl crontab 'sudo defaults read' stat lsbom mdfind ' for i in ${p[24]};do ${c1[18]} ${c2[27]} $i;done;' defaults\ read scutil sudo\ dtrace sudo\ profiles sed\ -En awk /S*/*/P*/*/*/C*/*/airport networksetup mdutil sudo\ lsof test osascript\ -e sysctl\ -n pluginkit sudo\ smcDiagnose );c2=(com.apple.loginwindow\ LoginHook '" /L*/P*/loginw*' "'tell app \"System Events\" to get properties of login items'|tr , \\\n" 'L*/Ca*/com.ap*.Saf*/E*/* -d 1 -name In*t -exec '"${c1[14]}"' :CFBundleDisplayName" {} \;|sort|uniq' '~ $TMPDIR.. \( -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 \)' '.??* -path .Trash -prune -o -type d -name *.app -print -prune' :${p[35]}\" :Label\" '{/,}L*/{Con,Pref}* -type f ! -size 0 -name *.plist -exec plutil -s {} \;' "-f'%N: %l' Desktop L*/Keyc*" therm sysload boot-args status " -F '\$Time \$(RefProc): \$Message' -k Sender kernel -k Message Req 'bad |Beac|caug|corru|dead[^bl]|FAIL|fail|GPU |hfs: Ru|inval|jnl:|last value [1-9]|n Cause: -|NVDA\(|pagin|proc: t|Roamed|rror|ssert|Thrott|tim(ed? ?|ing )o|WARN' -k Message Rne 'Goog|ksadm|Roame|SMC:|suhel| VALI|ver-r|xpma' -o -o -k Sender fseventsd -k Message Req SL -o -k Sender Req launchd -k Message Req de: " '-du -n DEV -n EDEV 1 10' 'acrx -o comm,ruid,%cpu' '-t1 10 1' '-f -pfc /var/db/r*/com.apple.*.{BS,Bas,Es,J,OSXU,Rem,up}*.bom' '{/,}L*/Lo*/Diag* -type f -regex .\*[cght] ! -name .?\* ! -name \*ag \( -exec grep -lq "^Thread c" {} \; -exec printf \* \; -o -true \) -execdir stat -f:%Sc:%N -t%F {} \;|sort -t: -k2 |tail -n'${p[38]} '/S*/*/Ca*/*xpc* >&- ||echo No' '-L /{S*/,}L*/StartupItems -type f -exec file {} +' '-L /S*/L*/{C*/Sec*A,Ex}* {/,}L*/{A*d,Ca*/*/Ex,Co{mpon,reM},Ex,In{p,ter},iTu*/*P,Keyb,Mail/B,Pr*P,Qu*T,Scripti,Sec,Servi,Spo,Widg}* -path \\*s/Resources -prune -o -type f -name Info.plist' '/usr/lib -type f -name *.dylib' `awk "${s[31]}"<<<${p[23]}` "/e*/{auto,{cron,fs}tab,hosts,{[lp],sy}*.conf,mach_i*/*,pam.d/*,ssh{,d}_config,*.local} {,/usr/local}/etc/periodic/*/* /L*/P*{,/*}/com.a*.{Bo,sec*.ap}*t {/S*/,/,}L*/Lau*/*t .launchd.conf" list getenv /Library/Preferences/com.apple.alf\ globalstate --proxy '-n get default' -I --dns -getdnsservers\ "${p[N5]}" -getinfo\ "${p[N5]}" -P -m\ / '' -n1 '-R -l1 -n1 -o prt -stats command,uid,prt' '--regexp --only-files --files com.apple.pkg.*|sort|uniq' -kl -l -s\ / '-R -l1 -n1 -o mem -stats command,uid,mem' '+c0 -i4TCP:0-1023' com.apple.dashboard\ layer-gadgets '-d /L*/Mana*/$USER&&echo On' '-app Safari WebKitDNSPrefetchingEnabled' "+c0 -l|awk '{print(\$1,\$3)}'|sort|uniq -c|sort -n|tail -1|awk '{print(\$2,\$3,\$1)}'" -m 'L*/{Con*/*/Data/L*/,}Pref* -type f -size 0c -name *.plist.???????|wc -l' kern.memorystatus_vm_pressure_level '3>&1 >&- 2>&3' );N1=${#c2[@]};for j in {0..9};do c2[N1+j]=SP${p[j]}DataType;done;N2=${#c2[@]};for j in 0 1;do c2[N2+j]="-n ' syscall::'${p[33+j]}':return { @out[execname,uid]=sum(arg0) } tick-10sec { trunc(@out,1);exit(0);} '";done;l=(Restricted\ files Hidden\ apps 'Elapsed time (s)' POST Battery Safari\ extensions Bad\ plists 'High file counts' User Heat System\ load boot\ args FileVault Diagnostic\ reports Log 'Free space (MiB)' 'Swap (MiB)' Activity 'CPU per process' Login\ hook 'I/O per process' Mach\ ports kexts Daemons Agents XPC\ cache Startup\ items Admin\ access Root\ access Bundles dylibs Apps Font\ issues Inserted\ dylibs Firewall Proxies DNS TCP/IP Wi-Fi Profiles Root\ crontab User\ crontab 'Global login items' 'User login items' Spotlight Memory Listeners Widgets Parental\ Controls Prefetching SATA Descriptors App\ extensions Lockfiles Memory\ pressure SMC );N3=${#l[@]};for i in 0 1 2;do l[N3+i]=${p[5+i]};done;N4=${#l[@]};for j in 0 1;do l[N4+j]="Current ${p[29+j]}stream data";done;A0() { id -G|grep -qw 80;v[1]=$?;((v[1]==0))&&sudo true;v[2]=$?;v[3]=`date +%s`;clear >&-;date '+Start time: %T %D%n';};for i in 0 1;do eval ' A'$((1+i))'() { v=` eval "${c1[$1]} ${c2[$2]}"|'${c1[30+i]}' "${s[$3]}" `;[[ "$v" ]];};A'$((3+i))'() { v=` while read i;do [[ "$i" ]]&&eval "${c1[$1]} ${c2[$2]}" \"$i\"|'${c1[30+i]}' "${s[$3]}";done<<<"${v[$4]}" `;[[ "$v" ]];};A'$((5+i))'() { v=` while read i;do '${c1[30+i]}' "${s[$1]}" "$i";done<<<"${v[$2]}" `;[[ "$v" ]];};';done;A7(){ v=$((`date +%s`-v[3]));};B2(){ v[$1]="$v";};for i in 0 1;do eval ' B'$i'() { v=;((v['$((i+1))']==0))||{ v=No;false;};};B'$((3+i))'() { v[$2]=`'${c1[30+i]}' "${s[$3]}"<<<"${v[$1]}"`;} ';done;B5(){ v[$1]="${v[$1]}"$'\n'"${v[$2]}";};B6() { v=` paste -d: <(printf "${v[$1]}") <(printf "${v[$2]}")|awk -F: ' {printf("'"${f[$3]}"'",$1,$2)} ' `;};B7(){ v=`grep -Fv "${v[$1]}"<<<"$v"`;};C0() { [[ "$v" ]]&&sed -E "$s"<<<"$v";};C1() { [[ "$v" ]]&&printf "${f[$1]}" "${l[$2]}" "$v"|sed -E "$s";};C2() { v=`echo $v`;[[ "$v" != 0 ]]&&C1 0 $1;};C3() { v=`sed -E "${s[63]}"<<<"$v"`&&C1 1 $1;};for i in 1 2;do for j in 0 2 3;do eval D$i$j'(){ A'$i' $1 $2 $3; C'$j' $4;};';done;done;{ A0;D20 0 $((N1+1)) 2;D10 0 $N1 1;B0;C2 27;B0&&! B1&&C2 28;D12 15 37 25 8;A1 0 $((N1+2)) 3;C0;D13 0 $((N1+3)) 4 3;D23 0 $((N1+4)) 5 4;D13 0 $((N1+9)) 59 50;for i in 0 1 2;do D13 0 $((N1+5+i)) 6 $((N3+i));done;D13 1 10 7 9;D13 1 11 8 10;B1&&D13 40 53 67 55;D22 2 12 9 11;D12 3 13 10 12;D23 4 19 44 13;D23 5 14 12 14;D22 6 36 13 15;D22 38 52 66 54;D22 7 37 14 16;D23 8 15 38 17;D22 9 16 16 18;B1&&{ D22 35 49 61 51;D22 11 17 17 20;for i in 0 1;do D22 28 $((N2+i)) 45 $((N4+i));done;};D22 12 44 54 45;D22 12 39 15 21;A1 13 40 18;B2 4;B3 4 0 19;A3 14 6 32 0;B4 0 5 11;A1 17 41 20;B7 5;C3 22;B4 4 6 21;A3 14 7 32 6;B4 0 7 11;B3 4 0 22;A3 14 6 32 0;B4 0 8 11;B5 7 8;B1&&{ A2 19 26 23;B7 7;C3 23;};A2 18 26 23;B7 7;C3 24;D13 4 21 24 26;B4 4 12 26;B3 4 13 27;A1 4 22 29;B7 12;B2 14;A4 14 6 52 14;B2 15;B6 14 15 4;B3 0 0 30;C3 29;A1 4 23 27;B7 13;C3 30;B3 4 0 65;A3 14 6 32 0;B4 0 16 11;A1 39 50 64;B7 16;C3 52;D13 24 24 32 31;D13 25 37 32 33;A2 23 18 28;B2 16;A2 16 25 33;B7 16;B3 0 0 34;B2 21;A6 47 21&&C0;B1&&{ D13 21 0 32 19;D13 10 42 32 40;D22 29 35 46 39;};D23 14 1 62 42;D12 34 43 53 44;D12 22 20 32 25;D22 0 $((N1+8)) 51 32;D13 4 8 41 6;D12 26 28 35 34;D13 27 29 36 35;A2 27 32 39&&{ B2 19;A2 33 33 40;B2 20;B6 19 20 3;};C2 36;D23 33 34 42 37;B1&&D23 35 45 55 46;D23 32 31 43 38;D12 36 47 32 48;D13 20 42 32 41;D13 37 2 48 43;D13 4 5 32 1;D13 4 3 60 5;D12 26 48 49 49;B3 4 22 57;A1 26 46 56;B7 22;B3 0 0 58;C3 47;D22 4 4 50 0;D12 4 51 32 53;D23 22 9 37 7;A7;C2 2;} 2>/dev/null|pbcopy;exit 2>&-
    Copy the selected text to the Clipboard by pressing the key combination command-C.
    8. Launch the built-in Terminal application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
    Click anywhere in the Terminal window and paste by pressing command-V. The text you pasted should vanish immediately. If it doesn't, press the return key.
    9. If you see an error message in the Terminal window such as "Syntax error" or "Event not found," enter
    exec bash
    and press return. Then paste the script again.
    10. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know the password, or if you prefer not to enter it, press the key combination control-C or just press return  three times at the password prompt. Again, the script will still run.
    If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
    11. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, there will be nothing in the Terminal window and no indication of progress. Wait for the line
    [Process completed]
    to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report what happened. No harm will be done.
    12. When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
    At the top of the results, there will be a line that begins with the words "Start time." If you don't see that, but instead see a mass of gibberish, you didn't wait for the "Process completed" message to appear in the Terminal window. Please wait for it and try again.
    If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
    13. When you post the results, you might see an error message on the web page: "You have included content in your post that is not permitted," or "You are not authorized to post." That's a bug in the forum software. Please post the test results on Pastebin, then post a link here to the page you created.
    14. This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
    Copyright © 2014 by Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Use Agreement for the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed.

  • I upgraded macbook to Yosemite, and now its become unbearable and extremely slow

    Problem description:
    I upgraded macbook to Yosemite, and now its become unbearable and extremely slow, I’ve deleted multiple files, and it is still extremely slow, I’ve also repaired disk permissions but it did little to nothing
    EtreCheck version: 2.0.8 (95)
    Report generated October 31, 2014 at 4:57:08 PM EDT
    Hardware Information: ℹ️
      MacBook Pro (13-inch, Early 2011) (Verified)
      MacBook Pro - model: MacBookPro8,1
      1 2.3 GHz Intel Core i5 CPU: 2-core
      4 GB RAM Upgradeable
      BANK 0/DIMM0
      2 GB DDR3 1333 MHz ok
      BANK 1/DIMM0
      2 GB DDR3 1333 MHz ok
      Bluetooth: Old - Handoff/Airdrop2 not supported
      Wireless:  en1: 802.11 a/b/g/n
    Video Information: ℹ️
      Intel HD Graphics 3000 - VRAM: 384 MB
      Color LCD 1280 x 800
    System Software: ℹ️
      OS X 10.10 (14A389) - Uptime: 0:25:44
    Disk Information: ℹ️
      Hitachi HTS545032B9A302 disk0 : (320.07 GB)
      S.M.A.R.T. Status: Verified
      EFI (disk0s1) <not mounted> : 210 MB
      Recovery HD (disk0s3) <not mounted>  [Recovery]: 650 MB
      Macintosh HD (disk1) /  [Startup]: 318.84 GB (148.50 GB free)
      Encrypted AES-XTS UnlockedConverting
      Core Storage: disk0s2 319.21 GB Online
      MATSHITADVD-R   UJ-898
    USB Information: ℹ️
      Apple Inc. FaceTime HD Camera (Built-in)
      Apple Inc. Apple Internal Keyboard / Trackpad
      Apple Inc. BRCM2070 Hub
      Apple Inc. Bluetooth USB Host Controller
      Apple Computer, Inc. IR Receiver
    Thunderbolt Information: ℹ️
      Apple Inc. thunderbolt_bus
    Configuration files: ℹ️
      /etc/hosts - Count: 51
    Gatekeeper: ℹ️
      Mac App Store and identified developers
    Kernel Extensions: ℹ️
      /Library/Application Support/Symantec/Protector
      [not loaded] com.symantec.kext.protector.panther (1.0f5) Support
      [not loaded] com.symantec.kext.protector.tigerplus (1.0f5) Support
      /Library/Extensions
      [not loaded] xxx.qnation.PeerGuardian (1.1.9) Support
      /Library/Sophos Anti-Virus/InterCheck.app
      [not loaded] com.sophos.kext.sav (8.0.4 - SDK 10.5) Support
      /Library/StartupItems/SymAutoProtect
      [not loaded] com.Symantec.kext.SAVAPComm (11.0.6) Support
      /System/Library/Extensions
      [not loaded] com.wacom.kext.pentablet (5.2.5) Support
    Startup Items: ℹ️
      NortonMissedTasks: Path: /Library/StartupItems/NortonMissedTasks
      SMC: Path: /Library/StartupItems/SMC
      SymAutoProtect: Path: /Library/StartupItems/SymAutoProtect
      SymProtector: Path: /Library/StartupItems/SymProtector
      Startup items are obsolete and will not work in future versions of OS X
    Launch Agents: ℹ️
      [not loaded] com.adobe.AAM.Updater-1.0.plist Support
      [running] com.symantec.quickmenu.application.plist Support
      [running] com.wacom.pentablet.plist Support
    Launch Daemons: ℹ️
      [loaded] com.adobe.fpsaud.plist Support
      [invalid?] com.adobe.SwitchBoard.plist Support
      [running] com.sophos.autoupdate.plist Support
      [failed] com.sophos.intercheck.plist Support
      [running] com.sophos.notification.plist Support
      [failed] xxx.qnation.PeerGuardian.kextload.plist Support
    User Launch Agents: ℹ️
      [loaded] com.adobe.AAM.Updater-1.0.plist Support
      [invalid?] com.adobe.ARM.[...].plist Support
      [loaded] com.facebook.videochat.[redacted].plist Support
      [loaded] com.spotify.webhelper.plist Support
    User Login Items: ℹ️
      None
    Internet Plug-ins: ℹ️
      JavaAppletPlugin: Version: 15.0.0 - SDK 10.10 Check version
      FlashPlayer-10.6: Version: 15.0.0.152 - SDK 10.6 Support
      Default Browser: Version: 600 - SDK 10.10
      AdobePDFViewerNPAPI: Version: 10.1.12 Support
      AdobePDFViewer: Version: 10.1.12 Support
      Flash Player: Version: 15.0.0.152 - SDK 10.6 Mismatch! Adobe recommends 15.0.0.189
      QuickTime Plugin: Version: 7.7.3
      WacomNetscape: Version: 1.1.1-1 Support
      WacomSafari: Version: 1.1.1-1 Support
      Silverlight: Version: 5.1.10411.0 - SDK 10.6 Support
      iPhotoPhotocast: Version: 7.0 - SDK 10.8
    Safari Extensions: ℹ️
      DuckDuckGo
    3rd Party Preference Panes: ℹ️
      Flash Player  Support
    Time Machine: ℹ️
      Time Machine not configured!
    Top Processes by CPU: ℹ️
          6% WindowServer
          2% kextd
          0% AppleSpell
          0% launchd
          0% ocspd
    Top Processes by Memory: ℹ️
      228 MB com.apple.WebKit.WebContent
      137 MB Safari
      103 MB Messages
      69 MB Spotlight
      64 MB CalendarAgent
    Virtual Memory Information: ℹ️
      96 MB Free RAM
      1.46 GB Active RAM
      1.35 GB Inactive RAM
      1.00 GB Wired RAM
      2.12 GB Page-ins
      9 MB Page-outs

    1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem. But with the aid of the test results, the solution may take a few minutes, instead of hours or days.
    Don't be put off by the complexity of these instructions. The process is much less complicated than the description. You do harder tasks with the computer all the time.
    2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. Backup is always a must, and when you're having any kind of trouble with the computer, you may be at higher than usual risk of losing data, whether you follow these instructions or not.
    There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
    3. Below are instructions to run a UNIX shell script, a type of program. As I wrote above, it changes nothing. It doesn't send or receive any data on the network. All it does is to generate a human-readable report on the state of the computer. That report goes nowhere unless you choose to share it. If you prefer, you can act on it yourself without disclosing the contents to me or anyone else.
    You should be wondering whether you can believe me, and whether it's safe to run a program at the behest of a stranger. In general, no, it's not safe and I don't encourage it.
    In this case, however, there are a couple of ways for you to decide whether the program is safe without having to trust me. First, you can read it. Unlike an application that you download and click to run, it's transparent, so anyone with the necessary skill can verify what it does.
    You may not be able to understand the script yourself. But variations of the script have been posted on this website thousands of times over a period of years. The site is hosted by Apple, which does not allow it to be used to distribute harmful software. Any one of the millions of registered users could have read the script and raised the alarm if it was harmful. Then I would not be here now and you would not be reading this message.
    Nevertheless, if you can't satisfy yourself that these instructions are safe, don't follow them. Ask for other options.
    4. Here's a summary of what you need to do, if you choose to proceed:
    ☞ Copy a line of text in this window to the Clipboard.
    ☞ Paste into the window of another application.
    ☞ Wait for the test to run. It usually takes a few minutes.
    ☞ Paste the results, which will have been copied automatically, back into a reply on this page.
    The sequence is: copy, paste, wait, paste again. You don't need to copy a second time. Details follow.
    5. You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode, under the conditions in which the problem is reproduced. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
    6. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
    7. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in the browser window, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
    Triple-click anywhere in the line of text below on this page to select it:
    PATH=/usr/bin:/bin:/usr/sbin:/sbin:/usr/libexec;clear;cd;p=(Software Hardware Memory Diagnostics Power FireWire Thunderbolt USB Fonts SerialATA 4 1000 25 5120 KiB/s 1024 85 \\b%% 20480 1 MB/s 25000 ports ' com.clark.\* \*dropbox \*genieo\* \*GoogleDr\* \*k.AutoCAD\* \*k.Maya\* vidinst\* ' DYLD_INSERT_LIBRARIES\ DYLD_LIBRARY_PATH -86 "` route -n get default|awk '/e:/{print $2}' `" 25 N\\/A down up 102400 25600 recvfrom sendto CFBundleIdentifier 25 25 25 1000 MB ' com.adobe.AAM.Updater-1.0 com.adobe.CS4ServiceManager com.adobe.CS5ServiceManager com.adobe.fpsaud com.adobe.SwitchBoard com.apple.AirPortBaseStationAgent com.apple.installer.osmessagetracing com.apple.SafariNotificationAgent com.apple.usbmuxd com.apple.xprotectupdater com.google.keystone.agent com.google.keystone.daemon com.microsoft.office.licensing.helper com.oracle.java.Helper-Tool com.oracle.java.JavaUpdateHelper ' ' 879294308 3627668074 1083382502 1274181950 1855907737 464843899 1233118628 2636415542 842973933 4019080058 3301885676 891055588 998894468 695903914 1443423563 ' 51 5120 files );N5=${#p[@]};p[N5]=` networksetup -listnetworkserviceorder|awk ' NR>1 { sub(/^\([0-9]+\) /,"");n=$0;getline;} $NF=="'${p[26]}')" { sub(/.$/,"",$NF);print n;exit;} ' `;f=('\n%s: %s\n' '\n%s\n\n%s\n' '\nRAM details\n%s\n' %s\ %s '%s\n-\t%s\n' );S0() { echo ' { q=$NF+0;$NF="";u=$(NF-1);$(NF-1)="";gsub(/^ +| +$/,"");if(q>='${p[$1]}') printf("%s (UID %s) is using %s '${p[$2]}'",$0,u,q);} ';};s=(' s/[0-9A-Za-z._]+@[0-9A-Za-z.]+\.[0-9A-Za-z]{2,4}/EMAIL/g;/faceb/s/(at\.)[^.]+/\1NAME/g;/\/Shared/!s/(\/Users\/)[^ /]+/\1USER/g;s/[-0-9A-Fa-f]{22,}/UUID/g;' ' s/^ +//;/de: S|[nst]:/p;' ' {sub(/^ +/,"")};/er:/;/y:/&&$2<'${p[10]} ' 1s/://;3,6d;/[my].+:/d;s/^ {4}//;H;${ g;s/\n$//;/s: [^EO]|x([^08]|02[^F]|8[^0])/p;} ' ' 5h;6{ H;g;/P/!p;} ' ' ($1~/^Cy/&&$3>'${p[11]}')||($1~/^Cond/&&$2!~/^N/) ' ' /:$/{ N;/:.+:/d;s/ *://;b0'$'\n'' };/^ *(V.+ [0N]|Man).+ /{ s/ 0x.... //;s/[()]//g;s/(.+: )(.+)/ (\2)/;H;};$b0'$'\n'' d;:0'$'\n'' x;s/\n\n//;/Apple[ ,]|Genesy|Intel|SMSC/d;s/\n.*//;/\)$/p;' ' s/^.*C/C/;H;${ g;/No th|pms/!p;} ' '/= [^GO]/p' '{$1=""};1' ' /Of/!{ s/^.+is |\.//g;p;} ' ' $0&&!/ / { n++;print;} END { split("'"${p[41]}"'",b);for(i in b) print b[i];if(n<10) print "com.apple.";} ' ' $3~/[0-9]:[0-9]{2}$/ { gsub(/:[0-9:a-f]{14}/,"");} { print|"tail -n'${p[12]}'";} ' ' NR==2&&$4<='${p[13]}' { print $4;} ' ' END { $2/=256;if($2>='${p[15]}') print int($2) } ' ' NR!=13{next};{sub(/[+-]$/,"",$NF)};'"`S0 21 22`" 'NR!=2{next}'"`S0 37 17`" ' NR!=5||$8!~/[RW]/{next};{ $(NF-1)=$1;$NF=int($NF/10000000);for(i=1;i<=3;i++){$i="";$(NF-1-i)="";};};'"`S0 19 20`" 's:^:/:p' '/\.kext\/(Contents\/)?Info\.plist$/p' 's/^.{52}(.+) <.+/\1/p' ' /Launch[AD].+\.plist$/ { n++;print;} END { split("'"${p[41]}"'",b);for(i in b) print b[i]".plist";if(n<200) print "/System/";} ' '/\.xpc\/(Contents\/)?Info\.plist$/p' ' NR>1&&!/0x|\.[0-9]+$|com\.apple\.launchctl\.(Aqua|Background|System)$/ { print $3;} ' ' /\.(framew|lproj)|\):/d;/plist:|:.+(Mach|scrip)/s/:[^:]+//p ' '/^root$/p' ' !/\/Contents\/.+\/Contents|Applic|Autom|Frameworks/&&/Lib.+\/Info.plist$/ { n++;print;} END { if(n<1100) print "/System/";} ' '/^\/usr\/lib\/.+dylib$/p' ' /Temp|emac/{next};/(etc|Preferences|Launch[AD].+)\// { sub(".(/private)?","");n++;print;} END { split("'"${p[41]}"'",b);split("'"${p[42]}"'",c);for(i in b) print b[i]".plist\t"c[i];if(n<500) print "Launch";} ' ' /\/(Contents\/.+\/Contents|Frameworks)\/|\.wdgt\/.+\.([bw]|plu)/d;p;' 's/\/(Contents\/)?Info.plist$//;p' ' { gsub("^| |\n","\\|\\|kMDItem'${p[35]}'=");sub("^...."," ") };1 ' p '{print $3"\t"$1}' 's/\'$'\t''.+//p' 's/1/On/p' '/Prox.+: [^0]/p' '$2>'${p[43]}'{$2=$2-1;print}' ' BEGIN { i="'${p[26]}'";M1='${p[16]}';M2='${p[18]}';M3='${p[31]}';M4='${p[32]}';} !/^A/{next};/%/ { getline;if($5<M1) a="user "$2"%, system "$4"%";} /disk0/&&$4>M2 { b=$3" ops/s, "$4" blocks/s";} $2==i { if(c) { d=$3+$4+$5+$6;next;};if($4>M3||$6>M4) c=int($4/1024)" in, "int($6/1024)" out";} END { if(a) print "CPU: "a;if(b) print "I/O: "b;if(c) print "Net: "c" (KiB/s)";if(d) print "Net errors: "d" packets/s";} ' ' /r\[0\] /&&$NF!~/^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./ { print $NF;exit;} ' ' !/^T/ { printf "(static)";exit;} ' '/apsd|BKAg|OpenD/!s/:.+//p' ' (/k:/&&$3!~/(255\.){3}0/ )||(/v6:/&&$2!~/A/ ) ' ' $1~"lR"&&$2<='${p[25]}';$1~"li"&&$3!~"wpa2";' ' BEGIN { FS=":";p="uniq -c|sed -E '"'s/ +\\([0-9]+\\)\\(.+\\)/\\\2 x\\\1/;s/x1$//'"'";} { n=split($3,a,".");sub(/_2[01].+/,"",$3);print $2" "$3" "a[n]$1|p;b=b$1;} END { close(p);if(b) print("\n\t* Code injection");} ' ' NR!=4{next} {$NF/=10240} '"`S0 27 14`" ' END { if($3~/[0-9]/)print$3;} ' ' BEGIN { L='${p[36]}';} !/^[[:space:]]*(#.*)?$/ { l++;if(l<=L) f=f"\n   "$0;} END { F=FILENAME;if(!F) exit;if(!f) f="\n   [N/A]";"cksum "F|getline C;split(C, A);C="checksum "A[1];"file -b "F|getline T;if(T!~/^(AS.+ (En.+ )?text(, with v.+)?$|(Bo|PO).+ sh.+ text ex|XM)/) F=F" ("T", "C")";else F=F" ("C")";printf("\nContents of %s\n%s\n",F,f);if(l>L) printf("\n   ...and %s more line(s)\n",l-L);} ' ' s/^ ?n...://p;s/^ ?p...:/-'$'\t''/p;' 's/0/Off/p' ' END{print NR} ' ' /id: N|te: Y/{i++} END{print i} ' ' / / { print "'"${p[28]}"'";exit;};1;' '/ en/!s/\.//p' ' NR!=13{next};{sub(/[+-M]$/,"",$NF)};'"`S0 39 40`" ' $10~/\(L/&&$9!~"localhost" { sub(/.+:/,"",$9);print $1": "$9;} ' '/^ +r/s/.+"(.+)".+/\1/p' 's/(.+\.wdgt)\/(Contents\/)?Info\.plist$/\1/p' 's/^.+\/(.+)\.wdgt$/\1/p' ' /l: /{ /DVD/d;s/.+: //;b0'$'\n'' };/s: /{ /V/d;s/^ */- /;H;};$b0'$'\n'' d;:0'$'\n'' x;/APPLE [^:]+$/d;p;' ' /^find: /d;p;' "`S0 44 45`" ' BEGIN{FS="= "} /Path/{print $2} ' ' /^ *$/d;s/^ */   /;' ' /:/d;/\./p;' '/\.appex\/Contents\/Info\.plist$/p' );c1=(system_profiler pmset\ -g nvram fdesetup find syslog df vm_stat sar ps sudo\ crontab sudo\ iotop top pkgutil 'PlistBuddy 2>&1 -c "Print' whoami cksum kextstat launchctl sudo\ launchctl crontab 'sudo defaults read' stat lsbom mdfind ' for i in ${p[24]};do ${c1[18]} ${c2[27]} $i;done;' defaults\ read scutil sudo\ dtrace sudo\ profiles sed\ -En awk /S*/*/P*/*/*/C*/*/airport networksetup mdutil sudo\ lsof test osascript\ -e );c2=(com.apple.loginwindow\ LoginHook '" /L*/P*/loginw*' "'tell app \"System Events\" to get properties of login items'|tr , \\\n" 'L*/Ca*/com.ap*.Saf*/E*/* -d 1 -name In*t -exec '"${c1[14]}"' :CFBundleDisplayName" {} \;|sort|uniq' '~ $TMPDIR.. \( -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 \)' '.??* -path .Trash -prune -o -type d -name *.app -print -prune' :${p[35]}\" :Label\" '{/,}L*/{Con,Pref}* -type f ! -size 0 -name *.plist -exec plutil -s {} \;' "-f'%N: %l' Desktop L*/Keyc*" therm sysload boot-args status " -F '\$Time \$Message' -k Sender kernel -k Message Req 'bad |Beac|caug|corru|dead[^bl]|FAIL|fail|GPU |hfs: Ru|inval|jnl:|last value [1-9]|n Cause: -|NVDA\(|pagin|proc: t|Roamed|rror|ssert|Thrott|tim(ed? ?|ing )o|WARN' -k Message Rne 'Goog|ksadm|SMC:|suhel| VALI|ver-r|xpma' -o -k Sender fseventsd -k Message Req 'SL' " '-du -n DEV -n EDEV 1 10' 'acrx -o comm,ruid,%cpu' '-t1 10 1' '-f -pfc /var/db/r*/com.apple.*.{BS,Bas,Es,J,OSXU,Rem,up}*.bom' '{/,}L*/Lo*/Diag* -type f -regex .\*[cght] ! -name .?\* ! -name \*ag \( -exec grep -lq "^Thread c" {} \; -exec printf \* \; -o -true \) -execdir stat -f:%Sc:%N -t%F {} \;|sort -t: -k2 |tail -n'${p[38]} '/S*/*/Ca*/*xpc* >&- ||echo No' '-L /{S*/,}L*/StartupItems -type f -exec file {} +' '-L /S*/L*/{C*/Sec*A,Ex}* {/,}L*/{A*d,Ca*/*/Ex,Co{mpon,reM},Ex,In{p,ter},iTu*/*P,Keyb,Mail/B,Pr*P,Qu*T,Scripti,Sec,Servi,Spo,Widg}* -path \\*s/Resources -prune -o -type f -name Info.plist' '/usr/lib -type f -name *.dylib' `awk "${s[31]}"<<<${p[23]}` "/e*/{auto,{cron,fs}tab,hosts,{[lp],sy}*.conf,mach_i*/*,pam.d/*,ssh{,d}_config,*.local} {,/usr/local}/etc/periodic/*/* /L*/P*{,/*}/com.a*.{Bo,sec*.ap}*t {/S*/,/,}L*/Lau*/*t .launchd.conf" list getenv /Library/Preferences/com.apple.alf\ globalstate --proxy '-n get default' -I --dns -getdnsservers\ "${p[N5]}" -getinfo\ "${p[N5]}" -P -m\ / '' -n1 '-R -l1 -n1 -o prt -stats command,uid,prt' '--regexp --only-files --files com.apple.pkg.*|sort|uniq' -kl -l -s\ / '-R -l1 -n1 -o mem -stats command,uid,mem' '+c0 -i4TCP:0-1023' com.apple.dashboard\ layer-gadgets '-d /L*/Mana*/$USER&&echo On' '-app Safari WebKitDNSPrefetchingEnabled' "+c0 -l|awk '{print(\$1,\$3)}'|sort|uniq -c|sort -n|tail -1|awk '{print(\$2,\$3,\$1)}'" 'L*/P*/com.ap*.p*.ext*.*.*t -exec '"${c1[14]}"' :displayOrder" {} \;' );N1=${#c2[@]};for j in {0..9};do c2[N1+j]=SP${p[j]}DataType;done;N2=${#c2[@]};for j in 0 1;do c2[N2+j]="-n ' syscall::'${p[33+j]}':return { @out[execname,uid]=sum(arg0) } tick-10sec { trunc(@out,1);exit(0);} '";done;l=(Restricted\ files Hidden\ apps 'Elapsed time (s)' POST Battery Safari\ extensions Bad\ plists 'High file counts' User Heat System\ load boot\ args FileVault Diagnostic\ reports Log 'Free space (MiB)' 'Swap (MiB)' Activity 'CPU per process' Login\ hook 'I/O per process' Mach\ ports kexts Daemons Agents XPC\ cache Startup\ items Admin\ access Root\ access Bundles dylibs Apps Font\ issues Inserted\ dylibs Firewall Proxies DNS TCP/IP Wi-Fi Profiles Root\ crontab User\ crontab 'Global login items' 'User login items' Spotlight Memory Listeners Widgets Parental\ Controls Prefetching SATA Descriptors appexes );N3=${#l[@]};for i in 0 1 2;do l[N3+i]=${p[5+i]};done;N4=${#l[@]};for j in 0 1;do l[N4+j]="Current ${p[29+j]}stream data";done;A0() { id -G|grep -qw 80;v[1]=$?;((v[1]==0))&&sudo true;v[2]=$?;v[3]=`date +%s`;clear >&-;date '+Start time: %T %D%n';};for i in 0 1;do eval ' A'$((1+i))'() { v=` eval "${c1[$1]} ${c2[$2]}"|'${c1[30+i]}' "${s[$3]}" `;[[ "$v" ]];};A'$((3+i))'() { v=` while read i;do [[ "$i" ]]&&eval "${c1[$1]} ${c2[$2]}" \"$i\"|'${c1[30+i]}' "${s[$3]}";done<<<"${v[$4]}" `;[[ "$v" ]];};A'$((5+i))'() { v=` while read i;do '${c1[30+i]}' "${s[$1]}" "$i";done<<<"${v[$2]}" `;[[ "$v" ]];};';done;A7(){ v=$((`date +%s`-v[3]));};B2(){ v[$1]="$v";};for i in 0 1;do eval ' B'$i'() { v=;((v['$((i+1))']==0))||{ v=No;false;};};B'$((3+i))'() { v[$2]=`'${c1[30+i]}' "${s[$3]}"<<<"${v[$1]}"`;} ';done;B5(){ v[$1]="${v[$1]}"$'\n'"${v[$2]}";};B6() { v=` paste -d: <(printf "${v[$1]}") <(printf "${v[$2]}")|awk -F: ' {printf("'"${f[$3]}"'",$1,$2)} ' `;};B7(){ v=`grep -Fv "${v[$1]}"<<<"$v"`;};C0() { [[ "$v" ]]&&sed -E "$s"<<<"$v";};C1() { [[ "$v" ]]&&printf "${f[$1]}" "${l[$2]}" "$v"|sed -E "$s";};C2() { v=`echo $v`;[[ "$v" != 0 ]]&&C1 0 $1;};C3() { v=`sed -E "${s[63]}"<<<"$v"`&&C1 1 $1;};for i in 1 2;do for j in 0 2 3;do eval D$i$j'(){ A'$i' $1 $2 $3; C'$j' $4;};';done;done;{ A0;D20 0 $((N1+1)) 2;D10 0 $N1 1;B0;C2 27;B0&&! B1&&C2 28;D12 15 37 25 8;A1 0 $((N1+2)) 3;C0;D13 0 $((N1+3)) 4 3;D23 0 $((N1+4)) 5 4;D13 0 $((N1+9)) 59 50;for i in 0 1 2;do D13 0 $((N1+5+i)) 6 $((N3+i));done;D13 1 10 7 9;D13 1 11 8 10;D22 2 12 9 11;D12 3 13 10 12;D23 4 19 44 13;D23 5 14 12 14;D22 6 36 13 15;D22 7 37 14 16;D23 8 15 38 17;D22 9 16 16 18;B1&&{ D22 35 49 61 51;D22 11 17 17 20;for i in 0 1;do D22 28 $((N2+i)) 45 $((N4+i));done;};D22 12 44 54 45;D22 12 39 15 21;A1 13 40 18;B2 4;B3 4 0 19;A3 14 6 32 0;B4 0 5 11;A1 17 41 20;B7 5;C3 22;B4 4 6 21;A3 14 7 32 6;B4 0 7 11;B3 4 0 22;A3 14 6 32 0;B4 0 8 11;B5 7 8;B1&&{ A2 19 26 23;B7 7;C3 23;};A2 18 26 23;B7 7;C3 24;D13 4 21 24 26;B4 4 12 26;B3 4 13 27;A1 4 22 29;B7 12;B2 14;A4 14 6 52 14;B2 15;B6 14 15 4;B3 0 0 30;C3 29;A1 4 23 27;B7 13;C3 30;B3 4 0 65;A3 14 6 32 0;B4 0 16 11;A1 4 50 64;B7 16;C3 52;D13 24 24 32 31;D13 25 37 32 33;A2 23 18 28;B2 16;A2 16 25 33;B7 16;B3 0 0 34;B2 21;A6 47 21&&C0;B1&&{ D13 21 0 32 19;D13 10 42 32 40;D22 29 35 46 39;};D23 14 1 62 42;D12 34 43 53 44;D12 22 20 32 25;D22 0 $((N1+8)) 51 32;D13 4 8 41 6;D12 26 28 35 34;D13 27 29 36 35;A2 27 32 39&&{ B2 19;A2 33 33 40;B2 20;B6 19 20 3;};C2 36;D23 33 34 42 37;B1&&D23 35 45 55 46;D23 32 31 43 38;D12 36 47 32 48;D13 20 42 32 41;D13 37 2 48 43;D13 4 5 32 1;D13 4 3 60 5;D12 26 48 49 49;B3 4 22 57;A1 26 46 56;B7 22;B3 0 0 58;C3 47;D22 4 4 50 0;D23 22 9 37 7;A7;C2 2;} 2>/dev/null|pbcopy;exit 2>&-
    Copy the selected text to the Clipboard by pressing the key combination command-C.
    8. Launch the built-in Terminal application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
    Click anywhere in the Terminal window and paste by pressing command-V. The text you pasted should vanish immediately. If it doesn't, press the return key.
    9. If you see an error message in the Terminal window such as "Syntax error" or "Event not found," enter
    exec bash
    and press return. Then paste the script again.
    10. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know the password, or if you prefer not to enter it, press the key combination control-C or just press return  three times at the password prompt. Again, the script will still run.
    If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
    11. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, there will be nothing in the Terminal window and no indication of progress. Wait for the line
    [Process completed]
    to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report what happened. No harm will be done.
    12. When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
    At the top of the results, there will be a line that begins with the words "Start time." If you don't see that, but instead see a mass of gibberish, you didn't wait for the "Process completed" message to appear in the Terminal window. Please wait for it and try again.
    If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
    13. When you post the results, you might see an error message on the web page: "You have included content in your post that is not permitted," or "You are not authorized to post." That's a bug in the forum software. Please post the test results on Pastebin, then post a link here to the page you created.
    14. This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
    Copyright © 2014 by Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Use Agreement for the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed.

  • Upgraded to yosemite and safari hangs/locks up

    hi upgraded to yosemite and safari hangs/locks up

    hi dominic
    no pop up screen - but ran etrecheck
    doesn’t mean anything to me
    Problem description:
    having installed yosemite safari now hangs/ will to open
    EtreCheck version: 2.1.8 (121)
    Report generated 10 February 2015 11:01:12 GMT
    Download EtreCheck from http://etresoft.com/etrecheck
    Click the [Click for support] links for help with non-Apple products.
    Click the [Click for details] links for more information about that line.
    Hardware Information: ℹ️
        iMac (27-inch, Late 2009) (Technical Specifications)
        iMac - model: iMac10,1
        1 3.06 GHz Intel Core 2 Duo CPU: 2-core
        16 GB RAM Upgradeable
            BANK 0/DIMM0
                4 GB DDR3 1067 MHz ok
            BANK 1/DIMM0
                4 GB DDR3 1067 MHz ok
            BANK 0/DIMM1
                4 GB DDR3 1067 MHz ok
            BANK 1/DIMM1
                4 GB DDR3 1067 MHz ok
        Bluetooth: Old - Handoff/Airdrop2 not supported
        Wireless:  en1: 802.11 a/b/g/n
    Video Information: ℹ️
        ATI Radeon HD 4670 - VRAM: 256 MB
            iMac 2560 x 1440
    System Software: ℹ️
        OS X 10.10.2 (14C109) - Time since boot: 4:13:42
    Disk Information: ℹ️
        ST31000528ASQ disk0 : (1 TB)
            EFI (disk0s1) <not mounted> : 210 MB
            Macintosh HD (disk0s2) / : 999.35 GB (549.15 GB free)
            Recovery HD (disk0s3) <not mounted>  [Recovery]: 650 MB
        HL-DT-ST DVDRW  GA11N 
    USB Information: ℹ️
        Apple Inc. Built-in iSight
        Apple Internal Memory Card Reader
        Logitech USB Receiver
        Apple Computer, Inc. IR Receiver
        Mitsumi Electric Hub in Apple Extended USB Keyboard
            Mitsumi Electric Apple Extended USB Keyboard
        GASIA Semi. USB HUB 2.0
            GASIA Semi. USB HUB 2.0
        Apple Inc. BRCM2046 Hub
            Apple Inc. Bluetooth USB Host Controller
    Gatekeeper: ℹ️
        Anywhere
    Kernel Extensions: ℹ️
            /Applications/Toast 10 Titanium/Toast Titanium.app
        [not loaded]    com.roxio.BluRaySupport (1.1.6) [Click for support]
        [not loaded]    com.roxio.TDIXController (1.7) [Click for support]
            /Library/Extensions
        [loaded]    com.symantec.kext.SymAPComm (12.7.1f4 - SDK 10.8) [Click for support]
        [not loaded]    com.symantec.kext.filesecurity (12.7f4 - SDK 10.8) [Click for support]
        [loaded]    com.symantec.kext.fw (5.3.1f4 - SDK 10.8) [Click for support]
        [loaded]    com.symantec.kext.internetSecurity (5.4f4 - SDK 10.8) [Click for support]
        [loaded]    com.symantec.kext.ips (3.9.2f1 - SDK 10.8) [Click for support]
        [loaded]    com.symantec.kext.pf (5.7.1f4 - SDK 10.8) [Click for support]
            /System/Library/Extensions
        [not loaded]    com.deepseasoftware.driver.CDSDAudioCaptureSupport (1.3) [Click for support]
        [not loaded]    com.ricoh.print.kext.USBPrintClass (3.00) [Click for support]
        [not loaded]    com.wacom.kext.wacomtablet (6.1.4) [Click for support]
            /downloads/LCC Installer.app
        [not loaded]    com.Logitech.Control Center.HID Driver (2.6.0) [Click for support]
    Startup Items: ℹ️
        AdobeVersionCueCS2: Path: /Library/StartupItems/AdobeVersionCueCS2
        ES1000Service: Path: /Library/StartupItems/ES1000Service
        Startup items are obsolete in OS X Yosemite
    Launch Agents: ℹ️
        [not loaded]    com.adobe.AAM.Updater-1.0.plist [Click for support]
        [running]    com.adobe.AdobeCreativeCloud.plist [Click for support]
        [running]    com.epson.epw.agent.plist [Click for support]
        [loaded]    com.intego.backupassistant.agent.plist [Click for support]
        [loaded]    com.intego.backupmanagerpro.agent.plist [Click for support]
        [loaded]    com.oracle.java.Java-Updater.plist [Click for support]
        [loaded]    com.symantec.errorreporter-periodicagent.plist [Click for support]
        [loaded]    com.symantec.nis.application.plist [Click for support]
        [running]    com.symantec.uiagent.application.plist [Click for support]
        [not loaded]    com.teamviewer.teamviewer.plist [Click for support]
        [not loaded]    com.teamviewer.teamviewer_desktop.plist [Click for support]
        [running]    com.wacom.wacomtablet.plist [Click for support]
    Launch Daemons: ℹ️
        [running]    com.adobe.adobeupdatedaemon.plist [Click for support]
        [loaded]    com.adobe.fpsaud.plist [Click for support]
        [loaded]    com.adobe.versioncueCS3.plist [Click for support]
        [running]    com.intego.BackupAssistant.daemon.plist [Click for support]
        [running]    com.intego.BackupManagerPro.daemon.plist [Click for support]
        [loaded]    com.microsoft.office.licensing.helper.plist [Click for support]
        [loaded]    com.oracle.java.Helper-Tool.plist [Click for support]
        [loaded]    com.quark.quarkupdate.plist [Click for support]
        [running]    com.symantec.deepsight-extractor.plist [Click for support]
        [loaded]    com.symantec.errorreporter-periodic.plist [Click for support]
        [loaded]    com.symantec.liveupdate.daemon.ondemand.plist [Click for support]
        [loaded]    com.symantec.liveupdate.daemon.plist [Click for support]
        [not loaded]    com.symantec.nav.migrateqtf.plist [Click for support]
        [running]    com.symantec.sharedsettings.plist [Click for support]
        [running]    com.symantec.symdaemon.plist [Click for support]
        [not loaded]    com.teamviewer.teamviewer_service.plist [Click for support]
    User Launch Agents: ℹ️
        [loaded]    com.adobe.AAM.Updater-1.0.plist [Click for support]
        [loaded]    com.adobe.ARM.[...].plist [Click for support]
        [loaded]    com.adobe.ARM.[...].plist [Click for support]
        [loaded]    com.adobe.ARM.[...].plist [Click for support]
        [loaded]    com.valvesoftware.steamclean.plist [Click for support]
    User Login Items: ℹ️
        Garmin Express Service    Application  (/Applications/Garmin Express.app/Contents/Library/LoginItems/Garmin Express Service.app)
        Garmin Lifetime Map Updater    UNKNOWN  (missing value)
        AdobeResourceSynchronizer    Application  (/Applications/Adobe Acrobat 8 Professional/Adobe Acrobat Professional.app/Contents/Support/AdobeResourceSynchronizer.app)
        Suitcase Fusion    Application Hidden (/Applications/Extensis Suitcase Fusion/Suitcase Fusion.app)
        EEventManager    Application  (/Applications/EPSON/Creativity Suite/Event Manager/EEventManager)
        MagicMenu    Application  (/Applications/StuffIt Archive Manager.app/Contents/MacOS/MagicMenu.app)
        EEventManager    Application Hidden (/Applications/Epson Software/Event Manager.app/Contents/Resources/Assistants/Event Manager/EEventManager.app)
        Dropbox    Application  (/Applications/Dropbox.app)
        QuarkXPress    Application Hidden (/Applications/QuarkXPress 10/QuarkXPress.app)
        EEventManager    Application  (/Applications/Epson Software/Event Manager.app/Contents/Resources/Assistants/Event Manager/EEventManager.app)
    Internet Plug-ins: ℹ️
        WacomNetscape: Version: 1.1.0-5 [Click for support]
        Default Browser: Version: 600 - SDK 10.10
        WacomSafari: Version: 1.1.0-5 [Click for support]
        AdobeAAMDetect: Version: AdobeAAMDetect 2.0.0.0 - SDK 10.7 [Click for support]
        FlashPlayer-10.6: Version: 16.0.0.305 - SDK 10.6 [Click for support]
        AdobePDFViewerNPAPI: Version: 11.0.0 - SDK 10.6 [Click for support]
        DivXBrowserPlugin: Version: 2.0 [Click for support]
        Flash Player: Version: 16.0.0.305 - SDK 10.6 [Click for support]
        QuickTime Plugin: Version: 7.7.3
        iPhotoPhotocast: Version: 7.0
        SharePointBrowserPlugin: Version: 14.1.0 [Click for support]
        AdobePDFViewer: Version: 11.0.0 - SDK 10.6 [Click for support]
        NortonInternetSecurityBF: Version: 1.11.0 - SDK 10.6 [Click for support]
        Silverlight: Version: 5.1.20913.0 - SDK 10.6 [Click for support]
        JavaAppletPlugin: Version: Java 8 Update 31 Check version
    User internet Plug-ins: ℹ️
        BrowserPlus_2.9.8: Version: 2.9.8 [Click for support]
        CitrixOnlineWebDeploymentPlugin: Version: 1.0 [Click for support]
    Safari Extensions: ℹ️
        Norton Internet Security
    3rd Party Preference Panes: ℹ️
        Adobe Version Cue CS2  [Click for support]
        Adobe Version Cue CS3  [Click for support]
        BrowserPlus  [Click for support]
        Flash Player  [Click for support]
        Growl  [Click for support]
        hueyPRO  [Click for support]
        Java  [Click for support]
        Norton\nQuickMenu  [Click for support]
        Quark Update Preferences  [Click for support]
    Time Machine: ℹ️
        Skip System Files: NO
        Mobile backups: OFF
        Auto backup: YES
        Volumes being backed up:
            Macintosh HD: Disk size: 999.35 GB Disk used: 450.19 GB
        Destinations:
            TimeMachineBackup [Network]
            Total size: 0 B
            Total number of backups: 0
            Oldest backup: -
            Last backup: -
            Size of backup disk: Too small
                Backup size 0 B < (Disk used 450.19 GB X 3)
    Top Processes by CPU: ℹ️
            10%    mds
             5%    WindowServer
             3%    backupd
             2%    diskimages-helper
             2%    hiutil
    Top Processes by Memory: ℹ️
        670 MB    Adobe Photoshop CC
        498 MB    QuarkXPress
        447 MB    Adobe Illustrator
        395 MB    firefox
        326 MB    SymDaemon
    Virtual Memory Information: ℹ️
        7.54 GB    Free RAM
        5.46 GB    Active RAM
        2.88 GB    Inactive RAM
        1.29 GB    Wired RAM
        22.42 GB    Page-ins
        78 KB    Page-outs
    Diagnostics Information: ℹ️
        Feb 10, 2015, 06:43:58 AM    Self test - passed
        Feb 8, 2015, 10:33:09 AM    /Library/Logs/DiagnosticReports/SymDaemon_2015-02-08-103309_[redacted].cpu_reso urce.diag [Click for details]
        Feb 7, 2015, 06:59:23 PM    /Library/Logs/DiagnosticReports/SymDaemon_2015-02-07-185923_[redacted].cpu_reso urce.diag [Click for details]
    how about you?
    regards

  • Recently upgrade to Yosemite and now Apple symbol and install bar displays each time I restart

    Hi guys,
    Hoping someone can help. Recently upgraded to Yosemite and the other day I noticed that when restarting the Apple symbol displayed along with the install bar (just like happens when you upgrade your iPhone). This went on for about 30 seconds before the login screen displayed. This now happens every time I restart. I haven't downloaded and tried to install any files so I am not sure why this keeps happening.
    I am worried it might be malware or similar that is trying to work into the operating system. I have disconnected WiFi and timed the restart to check the logs (although I have no idea what I am looking for). The Apple System Log (ASL) Message log seamed to have a number of fail messages and 'installation' lines so hopefully this will make sense to someone. Below is the log for that 30 seconds of the install.
    27 Oct 2014 8:12:13 pm bootlog[0]: BOOT_TIME 1414401133 0
    27 Oct 2014 8:12:29 pm syslogd[17]: Configuration Notice:
    ASL Module "com.apple.AccountPolicyHelper" claims selected messages.
    Those messages may not appear in standard system log files or in the ASL database.
    27 Oct 2014 8:12:29 pm syslogd[17]: Configuration Notice:
    ASL Module "com.apple.authd" sharing output destination "/var/log/asl" with ASL Module "com.apple.asl".
    Output parameters from ASL Module "com.apple.asl" override any specified in ASL Module "com.apple.authd".
    27 Oct 2014 8:12:29 pm syslogd[17]: Configuration Notice:
    ASL Module "com.apple.authd" sharing output destination "/var/log/system.log" with ASL Module "com.apple.asl".
    Output parameters from ASL Module "com.apple.asl" override any specified in ASL Module "com.apple.authd".
    27 Oct 2014 8:12:29 pm syslogd[17]: Configuration Notice:
    ASL Module "com.apple.authd" claims selected messages.
    Those messages may not appear in standard system log files or in the ASL database.
    27 Oct 2014 8:12:29 pm syslogd[17]: Configuration Notice:
    ASL Module "com.apple.awdd" claims selected messages.
    Those messages may not appear in standard system log files or in the ASL database.
    27 Oct 2014 8:12:29 pm syslogd[17]: Configuration Notice:
    ASL Module "com.apple.callhistory.asl.conf" claims selected messages.
    Those messages may not appear in standard system log files or in the ASL database.
    27 Oct 2014 8:12:29 pm syslogd[17]: Configuration Notice:
    ASL Module "com.apple.cloudd" claims selected messages.
    Those messages may not appear in standard system log files or in the ASL database.
    27 Oct 2014 8:12:29 pm syslogd[17]: Configuration Notice:
    ASL Module "com.apple.clouddocs" claims selected messages.
    Those messages may not appear in standard system log files or in the ASL database.
    27 Oct 2014 8:12:29 pm syslogd[17]: Configuration Notice:
    ASL Module "com.apple.commerce.asl" claims selected messages.
    Those messages may not appear in standard system log files or in the ASL database.
    27 Oct 2014 8:12:29 pm syslogd[17]: Configuration Notice:
    ASL Module "com.apple.CoreDuetAdmissionControl" claims selected messages.
    Those messages may not appear in standard system log files or in the ASL database.
    27 Oct 2014 8:12:29 pm syslogd[17]: Configuration Notice:
    ASL Module "com.apple.eventmonitor" claims selected messages.
    Those messages may not appear in standard system log files or in the ASL database.
    27 Oct 2014 8:12:29 pm syslogd[17]: Configuration Notice:
    ASL Module "com.apple.family.asl" claims selected messages.
    Those messages may not appear in standard system log files or in the ASL database.
    27 Oct 2014 8:12:29 pm syslogd[17]: Configuration Notice:
    ASL Module "com.apple.ical" claims selected messages.
    Those messages may not appear in standard system log files or in the ASL database.
    27 Oct 2014 8:12:29 pm syslogd[17]: Configuration Notice:
    ASL Module "com.apple.icloud.FindMyDevice" claims selected messages.
    Those messages may not appear in standard system log files or in the ASL database.
    27 Oct 2014 8:12:29 pm syslogd[17]: Configuration Notice:
    ASL Module "com.apple.install" claims selected messages.
    Those messages may not appear in standard system log files or in the ASL database.
    27 Oct 2014 8:12:29 pm syslogd[17]: Configuration Notice:
    ASL Module "com.apple.iokit.power" claims selected messages.
    Those messages may not appear in standard system log files or in the ASL database.
    27 Oct 2014 8:12:29 pm syslogd[17]: Configuration Notice:
    ASL Module "com.apple.mail" claims selected messages.
    Those messages may not appear in standard system log files or in the ASL database.
    27 Oct 2014 8:12:29 pm syslogd[17]: Configuration Notice:
    ASL Module "com.apple.MessageTracer" claims selected messages.
    Those messages may not appear in standard system log files or in the ASL database.
    27 Oct 2014 8:12:29 pm syslogd[17]: Configuration Notice:
    ASL Module "com.apple.networking.symptoms" claims selected messages.
    Those messages may not appear in standard system log files or in the ASL database.
    27 Oct 2014 8:12:29 pm syslogd[17]: Configuration Notice:
    ASL Module "com.apple.networking.symptoms" claims selected messages.
    Those messages may not appear in standard system log files or in the ASL database.
    27 Oct 2014 8:12:29 pm syslogd[17]: Configuration Notice:
    ASL Module "com.apple.performance" claims selected messages.
    Those messages may not appear in standard system log files or in the ASL database.
    27 Oct 2014 8:12:29 pm syslogd[17]: Configuration Notice:
    ASL Module "com.apple.secinitd" claims selected messages.
    Those messages may not appear in standard system log files or in the ASL database.
    27 Oct 2014 8:12:29 pm syslogd[17]: Configuration Notice:
    ASL Module "com.apple.securityd" claims selected messages.
    Those messages may not appear in standard system log files or in the ASL database.
    27 Oct 2014 8:12:29 pm syslogd[17]: Configuration Notice:
    ASL Module "com.apple.securityd" claims selected messages.
    Those messages may not appear in standard system log files or in the ASL database.
    27 Oct 2014 8:12:29 pm syslogd[17]: Configuration Notice:
    ASL Module "com.apple.securityd" claims selected messages.
    Those messages may not appear in standard system log files or in the ASL database.
    27 Oct 2014 8:12:29 pm syslogd[17]: Configuration Notice:
    ASL Module "com.apple.securityd" claims selected messages.
    Those messages may not appear in standard system log files or in the ASL database.
    27 Oct 2014 8:12:29 pm syslogd[17]: Configuration Notice:
    ASL Module "com.apple.securityd" claims selected messages.
    Those messages may not appear in standard system log files or in the ASL database.
    27 Oct 2014 8:12:29 pm syslogd[17]: Configuration Notice:
    ASL Module "com.apple.securityd" claims selected messages.
    Those messages may not appear in standard system log files or in the ASL database.
    27 Oct 2014 8:12:29 pm syslogd[17]: Configuration Notice:
    ASL Module "com.apple.securityd" claims selected messages.
    Those messages may not appear in standard system log files or in the ASL database.
    27 Oct 2014 8:12:29 pm kernel[0]: Longterm timer threshold: 1000 ms
    27 Oct 2014 8:12:29 pm kernel[0]: PMAP: PCID enabled
    27 Oct 2014 8:12:29 pm kernel[0]: Darwin Kernel Version 14.0.0: Fri Sep 19 00:26:44 PDT 2014; root:xnu-2782.1.97~2/RELEASE_X86_64
    27 Oct 2014 8:12:29 pm kernel[0]: vm_page_bootstrap: 1852727 free pages and 228041 wired pages
    27 Oct 2014 8:12:29 pm kernel[0]: kext submap [0xffffff7f80a00000 - 0xffffff8000000000], kernel text [0xffffff8000200000 - 0xffffff8000a00000]
    27 Oct 2014 8:12:29 pm kernel[0]: zone leak detection enabled
    27 Oct 2014 8:12:29 pm kernel[0]: "vm_compressor_mode" is 4
    27 Oct 2014 8:12:29 pm kernel[0]: multiq scheduler config: deep-drain 0, urgent first 1, depth limit 4, band limit 127, sanity check 0
    27 Oct 2014 8:12:29 pm kernel[0]: standard timeslicing quantum is 10000 us
    27 Oct 2014 8:12:29 pm kernel[0]: standard background quantum is 2500 us
    27 Oct 2014 8:12:29 pm kernel[0]: mig_table_max_displ = 13
    27 Oct 2014 8:12:29 pm kernel[0]: TSC Deadline Timer supported and enabled
    27 Oct 2014 8:12:29 pm kernel[0]: AppleACPICPU: ProcessorId=1 LocalApicId=0 Enabled
    27 Oct 2014 8:12:29 pm kernel[0]: AppleACPICPU: ProcessorId=2 LocalApicId=2 Enabled
    27 Oct 2014 8:12:29 pm kernel[0]: AppleACPICPU: ProcessorId=3 LocalApicId=4 Enabled
    27 Oct 2014 8:12:29 pm kernel[0]: AppleACPICPU: ProcessorId=4 LocalApicId=6 Enabled
    27 Oct 2014 8:12:29 pm kernel[0]: AppleACPICPU: ProcessorId=5 LocalApicId=255 Disabled
    27 Oct 2014 8:12:29 pm kernel[0]: AppleACPICPU: ProcessorId=6 LocalApicId=255 Disabled
    27 Oct 2014 8:12:29 pm kernel[0]: AppleACPICPU: ProcessorId=7 LocalApicId=255 Disabled
    27 Oct 2014 8:12:29 pm kernel[0]: AppleACPICPU: ProcessorId=8 LocalApicId=255 Disabled
    27 Oct 2014 8:12:29 pm kernel[0]: calling mpo_policy_init for TMSafetyNet
    27 Oct 2014 8:12:29 pm kernel[0]: Security policy loaded: Safety net for Time Machine (TMSafetyNet)
    27 Oct 2014 8:12:29 pm kernel[0]: calling mpo_policy_init for AMFI
    27 Oct 2014 8:12:29 pm kernel[0]: Security policy loaded: Apple Mobile File Integrity (AMFI)
    27 Oct 2014 8:12:29 pm kernel[0]: calling mpo_policy_init for Sandbox
    27 Oct 2014 8:12:29 pm kernel[0]: Security policy loaded: Seatbelt sandbox policy (Sandbox)
    27 Oct 2014 8:12:29 pm kernel[0]: calling mpo_policy_init for Quarantine
    27 Oct 2014 8:12:29 pm kernel[0]: Security policy loaded: Quarantine policy (Quarantine)
    27 Oct 2014 8:12:29 pm kernel[0]: Copyright (c) 1982, 1986, 1989, 1991, 1993
    27 Oct 2014 8:12:29 pm kernel[0]: The Regents of the University of California. All rights reserved.
    27 Oct 2014 8:12:29 pm kernel[0]: MAC Framework successfully initialized
    27 Oct 2014 8:12:29 pm kernel[0]: using 16384 buffer headers and 10240 cluster IO buffer headers
    27 Oct 2014 8:12:29 pm kernel[0]: AppleKeyStore starting (BUILT: Sep 19 2014 00:11:30)
    27 Oct 2014 8:12:29 pm kernel[0]: IOAPIC: Version 0x20 Vectors 64:87
    27 Oct 2014 8:12:24 pm com.apple.xpc.launchd[1]: This key does not do anything: OnDemand
    27 Oct 2014 8:12:29 pm kernel[0]: ACPI: sleep states S3 S4 S5
    27 Oct 2014 8:12:29 pm kernel[0]: AppleIntelCPUPowerManagement: Turbo Ratios 159A
    27 Oct 2014 8:12:29 pm kernel[0]: AppleIntelCPUPowerManagement: (built 00:11:36 Sep 19 2014) initialization complete
    27 Oct 2014 8:12:29 pm kernel[0]: pci (build 00:11:20 Sep 19 2014), flags 0xe3000, pfm64 (36 cpu) 0xf80000000, 0x80000000
    27 Oct 2014 8:12:29 pm kernel[0]: [ PCI configuration begin ]
    27 Oct 2014 8:12:29 pm kernel[0]: console relocated to 0xf80010000
    27 Oct 2014 8:12:29 pm kernel[0]: [ PCI configuration end, bridges 12, devices 17 ]
    27 Oct 2014 8:12:29 pm kernel[0]: Thunderbolt runtime power conservation disabled.
    27 Oct 2014 8:12:29 pm kernel[0]: mcache: 4 CPU(s), 64 bytes CPU cache line size
    27 Oct 2014 8:12:29 pm kernel[0]: mbinit: done [96 MB total pool size, (64/32) split]
    27 Oct 2014 8:12:29 pm kernel[0]: rooting via boot-uuid from /chosen: 86F7AE8B-06AF-32E7-AF82-3CFDF274A0D2
    27 Oct 2014 8:12:29 pm kernel[0]: Waiting on <dict ID="0"><key>IOProviderClass</key><string ID="1">IOResources</string><key>IOResourceMatch</key><string ID="2">boot-uuid-media</string></dict>
    27 Oct 2014 8:12:29 pm kernel[0]: com.apple.AppleFSCompressionTypeZlib kmod start
    27 Oct 2014 8:12:29 pm kernel[0]: com.apple.AppleFSCompressionTypeDataless kmod start
    27 Oct 2014 8:12:29 pm kernel[0]: com.apple.AppleFSCompressionTypeZlib load succeeded
    27 Oct 2014 8:12:29 pm kernel[0]: com.apple.AppleFSCompressionTypeDataless load succeeded
    27 Oct 2014 8:12:29 pm kernel[0]: AppleIntelCPUPowerManagementClient: ready
    27 Oct 2014 8:12:29 pm kernel[0]: FireWire (OHCI) Lucent ID 5901 built-in now active, GUID 003ee1fffe0c6820; max speed s800.
    27 Oct 2014 8:12:29 pm kernel[0]: Got boot device = IOService:/AppleACPIPlatformExpert/PCI0@0/AppleACPIPCI/SATA@1F,2/AppleIntelPchS eriesAHCI/PRT0@0/IOAHCIDevice@0/AppleAHCIDiskDriver/IOAHCIBlockStorageDevice/IOB lockStorageDriver/ST31000528AS Media/IOGUIDPartitionScheme/Customer@2
    27 Oct 2014 8:12:29 pm kernel[0]: BSD root: disk0s2, major 1, minor 2
    27 Oct 2014 8:12:29 pm kernel[0]: USBMSC Identifier (non-unique): 000000009833 0x5ac 0x8403 0x9833, 2
    27 Oct 2014 8:12:29 pm kernel[0]: ath_get_caps[4044] rx chainmask mismatch actual 7 sc_chainmak 0
    27 Oct 2014 8:12:29 pm kernel[0]: 2.038506: ath_get_caps[4019] tx chainmask mismatch actual 7 sc_chainmak 0
    27 Oct 2014 8:12:29 pm kernel[0]: 2.042249: Atheros: mac 448.3 phy 3205.6 radio 0.0
    27 Oct 2014 8:12:29 pm kernel[0]: 2.042259: Use hw queue 0 for WME_AC_BE traffic
    27 Oct 2014 8:12:29 pm kernel[0]: 2.042267: Use hw queue 1 for WME_AC_BK traffic
    27 Oct 2014 8:12:29 pm kernel[0]: 2.042273: Use hw queue 2 for WME_AC_VI traffic
    27 Oct 2014 8:12:29 pm kernel[0]: 2.042280: Use hw queue 3 for WME_AC_VO traffic
    27 Oct 2014 8:12:29 pm hidd[68]: void __IOHIDPlugInLoadBundles(): Loaded 0 HID plugins
    27 Oct 2014 8:12:29 pm kernel[0]: 2.042287: Use hw queue 8 for CAB traffic
    27 Oct 2014 8:12:29 pm kernel[0]: 2.042293: Use hw queue 9 for beacons
    27 Oct 2014 8:12:29 pm kernel[0]: 2.042371: wlan_vap_create : enter. devhandle=0xfc8fd718, opmode=IEEE80211_M_STA, flags=0x1
    27 Oct 2014 8:12:29 pm kernel[0]: 2.042410: wlan_vap_create : exit. devhandle=0xfc8fd718, opmode=IEEE80211_M_STA, flags=0x1.
    27 Oct 2014 8:12:29 pm kernel[0]: bpfAttach len 88 dlt 127
    27 Oct 2014 8:12:29 pm kernel[0]: bpfAttach len 124 dlt 192
    27 Oct 2014 8:12:29 pm kernel[0]: bpfAttach len 24 dlt 105
    27 Oct 2014 8:12:29 pm kernel[0]: 2.042455: ATH tunables:
    27 Oct 2014 8:12:29 pm kernel[0]: 2.042459:   pullmode[1] txringsize[  256] txsendqsize[1024] reapmin[   32] reapcount[  128]
    27 Oct 2014 8:12:29 pm kernel[0]: hfs: mounted Macintosh HD on device root_device
    27 Oct 2014 8:12:29 pm kernel[0]: VM Swap Subsystem is ON
    27 Oct 2014 8:12:29 pm hidd[68]: ____IOHIDSessionScheduleAsync_block_invoke: thread_id=0x105b6d000
    27 Oct 2014 8:12:29 pm hidd[68]: HID Session async scheduling initiated.
    27 Oct 2014 8:12:29 pm hidd[68]: HID Session async root queue running at priority 63 and schedule 2.
    27 Oct 2014 8:12:29 pm hidd[68]: HID Session async scheduling complete.
    27 Oct 2014 8:12:24 pm com.apple.xpc.launchd[1]: The ServiceIPC key is no longer respected. Please remove it.
    27 Oct 2014 8:12:29 pm iconservicesagent[37]: iconservicesagent launched.
    27 Oct 2014 8:12:29 pm hidd[68]: Successfully opened the IOHIDSession
    27 Oct 2014 8:12:24 pm com.apple.xpc.launchd[1]: The HideUntilCheckIn property is an architectural performance issue. Please transition away from it.
    27 Oct 2014 8:12:24 pm com.apple.xpc.launchd[1]: Unknown key for array: seatbelt-profiles
    27 Oct 2014 8:12:24 pm com.apple.xpc.launchd[1]: The TimeOut key is no longer respected. It never did anything anyway.
    27 Oct 2014 8:12:24 pm com.apple.xpc.launchd[1]: This service is defined to be constantly running and is inherently inefficient.
    27 Oct 2014 8:12:24 pm com.apple.xpc.launchd[1]: The HideUntilCheckIn property is an architectural performance issue. Please transition away from it.
    27 Oct 2014 8:12:24 pm com.apple.xpc.launchd[1]: The HideUntilCheckIn property is an architectural performance issue. Please transition away from it.
    27 Oct 2014 8:12:24 pm com.apple.xpc.launchd[1]: The TimeOut key is no longer respected. It never did anything anyway.
    27 Oct 2014 8:12:24 pm com.apple.xpc.launchd[1]: ThrottleInterval set to zero. You're not that important. Ignoring.
    27 Oct 2014 8:12:24 pm com.apple.xpc.launchd[1]: ThrottleInterval set to zero. You're not that important. Ignoring.
    27 Oct 2014 8:12:24 pm com.apple.xpc.launchd[1]: ThrottleInterval set to zero. You're not that important. Ignoring.
    27 Oct 2014 8:12:24 pm com.apple.xpc.launchd[1]: This service is defined to be constantly running and is inherently inefficient.
    27 Oct 2014 8:12:24 pm com.apple.xpc.launchd[1]: This service is defined to be constantly running and is inherently inefficient.
    27 Oct 2014 8:12:24 pm com.apple.xpc.launchd[1]: The HideUntilCheckIn property is an architectural performance issue. Please transition away from it.
    27 Oct 2014 8:12:24 pm com.apple.xpc.launchd[1]: This key does not do anything: OnDemand
    27 Oct 2014 8:12:29 pm iconservicesagent[37]: Starting service with cache path: /var/folders/zz/zyxvpxvq6csfxvn_n0000000000000/C/com.apple.iconservices
    27 Oct 2014 8:12:29 pm com.apple.SecurityServer[52]: Session 100000 created
    27 Oct 2014 8:12:30 pm kernel[0]: IO80211Controller::dataLinkLayerAttachComplete():  adding AppleEFINVRAM notification
    27 Oct 2014 8:12:30 pm kernel[0]: IO80211Interface::efiNVRAMPublished(): 
    27 Oct 2014 8:12:30 pm kernel[0]: bpfAttach len 64 dlt 12
    27 Oct 2014 8:12:30 pm watchdogd[30]:  [watchdog_daemon] @(    wd_watchdog_open) - IOIteratorNext failed (kr=0)
    27 Oct 2014 8:12:30 pm watchdogd[30]:  [watchdog_daemon] @(      wd_daemon_init) - could not initialize the hardware watchdog
    27 Oct 2014 8:12:30 pm watchdogd[30]:  [watchdog_daemon] @(                main) - cannot initialize the watchdog service
    27 Oct 2014 8:12:30 pm com.apple.xpc.launchd[1]: Service only ran for 6 seconds. Pushing respawn out by 4 seconds.
    27 Oct 2014 8:12:30 pm com.apple.xpc.launchd[1]: The JoinExistingSession key is only available to Application services.
    27 Oct 2014 8:12:30 pm com.apple.xpc.launchd[1]: The HideUntilCheckIn property is an architectural performance issue. Please transition away from it.
    27 Oct 2014 8:12:30 pm com.apple.xpc.launchd[1]: This key does not do anything: OnDemand
    27 Oct 2014 8:12:30 pm com.apple.xpc.launchd[1]: This key does not do anything: OnDemand
    27 Oct 2014 8:12:30 pm com.apple.xpc.launchd[1]: This key does not do anything: OnDemand
    27 Oct 2014 8:12:30 pm com.apple.xpc.launchd[1]: The ServiceIPC key is no longer respected. Please remove it.
    27 Oct 2014 8:12:30 pm com.apple.xpc.launchd[1]: This key does not do anything: OnDemand
    27 Oct 2014 8:12:30 pm com.apple.xpc.launchd[1]: This key does not do anything: OnDemand
    27 Oct 2014 8:12:32 pm kernel[0]: IOGraphics flags 0x43
    27 Oct 2014 8:12:32 pm kernel[0]: IOBluetoothUSBDFU::probe
    27 Oct 2014 8:12:32 pm kernel[0]: IOBluetoothUSBDFU::probe ProductID - 0x8215 FirmwareVersion - 0x0208
    27 Oct 2014 8:12:32 pm kernel[0]: **** [IOBluetoothHostControllerUSBTransport][start] -- completed -- result = TRUE -- 0x9800 ****
    27 Oct 2014 8:12:32 pm kernel[0]: **** [BroadcomBluetoothHostControllerUSBTransport][start] -- Completed -- 0x9800 ****
    27 Oct 2014 8:12:32 pm kernel[0]: [IOBluetoothHCIController][staticBluetoothTransportShowsUp] -- Received Bluetooth Controller register service notification -- 0x9800
    27 Oct 2014 8:12:32 pm kernel[0]: [IOBluetoothHCIController][start] -- completed
    27 Oct 2014 8:12:32 pm kernel[0]: ** GPU Hardware VM is disabled (multispace: disabled, page table updates with DMA: disabled)
    27 Oct 2014 8:12:32 pm kernel[0]: [IOBluetoothHCIController::setConfigState] calling registerService
    27 Oct 2014 8:12:32 pm kernel[0]: **** [IOBluetoothHCIController][ProcessBluetoothTransportShowsUpActionWL] -- Connected to the transport successfully -- 0xba80 -- 0xe800 -- 0x9800 ****
    27 Oct 2014 8:12:32 pm kernel[0]: Previous shutdown cause: 5
    27 Oct 2014 8:12:32 pm kernel[0]: DSMOS has arrived
    27 Oct 2014 8:12:32 pm hidd[68]: IOHIDService compatibility thread running at priority 63 and schedule 2.
    27 Oct 2014 8:12:32 pm com.apple.usbmuxd[51]: usbmuxd-344.3 on Oct 13 2014 at 21:10:09, running 64 bit
    27 Oct 2014 8:12:32 pm opendirectoryd[45]: BUG in libdispatch: 14A389 - 2004 - 0x5
    27 Oct 2014 8:12:32 pm iconservicesd[36]: iconservicesd launched.
    27 Oct 2014 8:12:32 pm iconservicesd[36]: Cache path: /Library/Caches/com.apple.iconservices.store
    27 Oct 2014 8:12:33 pm configd[25]: preference: no sharing preferences
    27 Oct 2014 8:12:34 pm com.apple.SecurityServer[52]: Entering service
    27 Oct 2014 8:12:34 pm loginwindow[64]: Login Window Application Started
    27 Oct 2014 8:12:34 pm com.apple.xpc.launchd[1]: Service "com.apple.ManagedClient.startup" tried to hijack endpoint "com.apple.ManagedClient.agent" from owner: com.apple.ManagedClient
    27 Oct 2014 8:12:34 pm UserEventAgent[16]: Failed to copy info dictionary for bundle /System/Library/UserEventPlugins/alfUIplugin.plugin
    27 Oct 2014 8:12:34 pm digest-service[95]: label: default
    27 Oct 2014 8:12:34 pm digest-service[95]:           dbname: od:/Local/Default
    27 Oct 2014 8:12:34 pm digest-service[95]:           mkey_file: /var/db/krb5kdc/m-key
    27 Oct 2014 8:12:34 pm digest-service[95]:           acl_file: /var/db/krb5kdc/kadmind.acl
    27 Oct 2014 8:12:34 pm thermald[22]: Waiting for OSTT support notification
    27 Oct 2014 8:12:34 pm WindowServer[112]: Server is starting up
    27 Oct 2014 8:12:34 pm UserEventAgent[16]: Captive: CNPluginHandler en1: Inactive
    27 Oct 2014 8:12:35 pm digest-service[95]: digest-request: uid=0
    27 Oct 2014 8:12:35 pm secinitd[114]: UID[0]: cache loaded: /System/Library/Caches/com.apple.app-sandbox-cache.plist
    27 Oct 2014 8:12:35 pm secinitd[114]: ctkd[113]: unable to get root path for bundle of main executable: /System/Library/Frameworks/CryptoTokenKit.framework/ctkd
    27 Oct 2014 8:12:35 pm locationd[54]: Logging binary sensor data to /var/folders/zz/zyxvpxvq6csfxvn_n00000sm00006d/C/locationdSensors.bin
    27 Oct 2014 8:12:35 pm locationd[54]: NBB-Could not get UDID for stable refill timing, falling back on random
    27 Oct 2014 8:12:35 pm locationd[54]: Location icon should now be in state 'Inactive'
    27 Oct 2014 8:12:35 pm configd[25]: [bootp_transmit.c:213] bootp_transmit(): bpf_write(en0) failed: Network is down (50)
    27 Oct 2014 8:12:35 pm configd[25]: DHCP en0: INIT transmit failed
    27 Oct 2014 8:12:35 pm com.apple.xpc.launchd[1]: The JoinExistingSession key is only available to Application services.
    27 Oct 2014 8:12:35 pm kernel[0]: bpfAttach len 124 dlt 192
    27 Oct 2014 8:12:35 pm kernel[0]: bpfAttach len 88 dlt 127
    27 Oct 2014 8:12:35 pm kernel[0]: bpfAttach len 24 dlt 105
    27 Oct 2014 8:12:35 pm kernel[0]: AirPort: Link Down on en1. Reason 8 (Disassociated because station leaving).
    27 Oct 2014 8:12:35 pm kernel[0]: en1::IO80211Interface::postMessage bssid changed
    27 Oct 2014 8:12:35 pm configd[25]: dhcp_arp_router: en1 SSID unavailable
    27 Oct 2014 8:12:35 pm configd[25]: setting hostname to "Lukes-iMac.local"
    27 Oct 2014 8:12:35 pm configd[25]: network changed.
    27 Oct 2014 8:12:35 pm digest-service[95]: digest-request: netr probe 0
    27 Oct 2014 8:12:35 pm digest-service[95]: digest-request: init request
    27 Oct 2014 8:12:35 pm digest-service[95]: digest-request: init return domain: BUILTIN server: LUKES-IMAC indomain was: <NULL>
    27 Oct 2014 8:12:36 pm mdmclient[40]: ApplePushService: Timed out making blocking call, failed to perform call via XPC connection to 'com.apple.apsd'
    27 Oct 2014 8:12:36 pm com.apple.xpc.launchd[1]: The JoinExistingSession key is only available to Application services.
    27 Oct 2014 8:12:36 pm com.apple.xpc.launchd[1]: The _DirtyJetsamMemoryLimit key is not available on this platform.
    27 Oct 2014 8:12:36 pm com.apple.xpc.launchd[1]: The _DirtyJetsamMemoryLimit key is not available on this platform.
    27 Oct 2014 8:12:36 pm UserEventAgent[16]: nsurlsessiond_events plugin: adding token 1 for client softwareupdate_download_service
    27 Oct 2014 8:12:36 pm networkd[130]: networkd-411 pid 130
    27 Oct 2014 8:12:36 pm apsd[49]: CGSLookupServerRootPort: Failed to look up the port for "com.apple.windowserver.active" (1102)
    27 Oct 2014 8:12:36 pm systemkeychain[132]: done file: /var/run/systemkeychaincheck.done
    27 Oct 2014 8:12:36 pm apsd[49]: Unable to bootstrap_look_up connection port 'com.apple.askpermission.aps' for user 0: Unknown service name
    27 Oct 2014 8:12:36 pm apsd[49]: Attempt to set push wake topics without dark wake enabled: ()
    27 Oct 2014 8:12:36 pm apsd[49]: Unable to bootstrap_look_up connection port 'com.apple.askpermission.aps' for user 0: Unknown service name
    27 Oct 2014 8:12:36 pm apsd[49]: <APSConnectionServer: 0x7fa5796183e0> Invalid mach port - Cleaning up this named port's topics. com.apple.askpermission.aps
    27 Oct 2014 8:12:36 pm discoveryd[48]: Basic Sockets GetProcessNameFromSocket() failed errno[57] err[-1]
    27 Oct 2014 8:12:36 pm discoveryd[48]: Basic Sockets Unknown(-1), errno 0 UDS FD=3
    27 Oct 2014 8:12:36 pm discoveryd[48]: Basic Sockets UDS FD=3 ERROR: failed to get effective user ID, errno 0
    27 Oct 2014 8:12:36 pm discoveryd[48]: Basic SleepProxy BSP Server Disabled. Metric = 3373
    27 Oct 2014 8:12:36 pm discoveryd[48]: AwdlD2d AwdlD2dInitialize: Initialized
    27 Oct 2014 8:12:36 pm discoveryd[48]: D2D_IPC: Loaded
    27 Oct 2014 8:12:36 pm discoveryd[48]: Basic WABServer NetResolverEvent no resolvers, resetting domains
    27 Oct 2014 8:12:36 pm discoveryd[48]: Basic DNSResolver etc/hosts file changed: Event 0x7f86a0d06700 Flushed /etc/hosts cache
    27 Oct 2014 8:12:36 pm discoveryd[48]: Basic RemoteControl com.apple.discoveryd Starting XPC Server
    27 Oct 2014 8:12:36 pm discoveryd[48]: Basic SleepProxy Could not get the primary interface
    27 Oct 2014 8:12:36 pm discoveryd[48]: Basic RemoteControl com.apple.discoveryd.dnsproxy Starting XPC Server
    27 Oct 2014 8:12:36 pm discoveryd[48]: Basic SleepProxy Sleep Proxy Server is not enabled
    27 Oct 2014 8:12:36 pm discoveryd_helper[145]: Basic RemoteControl com.apple.discoveryd_helper Starting XPC Server
    27 Oct 2014 8:12:36 pm discoveryd_helper[145]: Detailed RemoteControl com.apple.discoveryd_helper XPC connection 0x7fac7bf00400: start (pid=48, <unknown> not root)
    27 Oct 2014 8:12:36 pm configd[25]: network changed.
    27 Oct 2014 8:12:36 pm kernel[0]: AppleBCM5701Ethernet [en0]:        1        0 load_batch_arp_firmware: invalid firmware signature
    27 Oct 2014 8:12:37 pm kernel[0]: AtherosNewma40P2PInterface::init name <p2p0> role 1
    27 Oct 2014 8:12:37 pm kernel[0]: AtherosNewma40P2PInterface::init <p2p> role 1
    27 Oct 2014 8:12:37 pm airportd[29]: airportdProcessDLILEvent: en1 attached (up)
    27 Oct 2014 8:12:37 pm discoveryd[48]: Basic Bonjour,Warn Warning: IPv6 listener multicast send failed en1, 49
    27 Oct 2014 8:12:37 pm discoveryd[48]: Basic Bonjour,Warn Warning: IPv6 listener multicast send failed en1, 49
    27 Oct 2014 8:12:37 pm mds[32]: (FMW.Normal:1402) FMW 0 0
    27 Oct 2014 8:12:37 pm discoveryd[48]: Basic Bonjour,Warn Warning: IPv6 listener multicast send failed en1, 49
    27 Oct 2014 8:12:38 pm discoveryd[48]: Basic Bonjour,Warn Warning: IPv6 listener multicast send failed en1, 49
    27 Oct 2014 8:12:38 pm discoveryd[48]: Basic Bonjour,Warn Warning: IPv6 listener multicast send failed en1, 49
    27 Oct 2014 8:12:38 pm kernel[0]: 26.885109: setDISASSOC from ATH_INTERFACE_CLASS disconnectVap
    27 Oct 2014 8:12:38 pm kernel[0]: 26.885132: switchVap from 1 to 1
    27 Oct 2014 8:12:38 pm discoveryd[48]: Basic Bonjour stop listening on en1
    27 Oct 2014 8:12:40 pm lsregister[147]: LaunchServices: Begin database seeding
    27 Oct 2014 8:12:40 pm lsregister[147]: LaunchServices: Completed database seeding
    27 Oct 2014 8:12:41 pm kernel[0]: [AGPM Controller] build GPUDict by Vendor1002Device6740
    27 Oct 2014 8:12:41 pm WindowServer[112]: Session 257 retained (2 references)
    27 Oct 2014 8:12:41 pm WindowServer[112]: Session 257 released (1 references)
    27 Oct 2014 8:12:41 pm kernel[0]: en2: promiscuous mode enable succeeded
    27 Oct 2014 8:12:41 pm kernel[0]: en3: promiscuous mode enable succeeded
    27 Oct 2014 8:12:41 pm WindowServer[112]: Session 257 retained (2 references)
    27 Oct 2014 8:12:41 pm WindowServer[112]: init_page_flip: page flip mode is on
    27 Oct 2014 8:12:41 pm WindowServer[112]: Found 26 modes for display 0x00000000 [26, 0]
    27 Oct 2014 8:12:41 pm WindowServer[112]: Found 1 modes for display 0x00000000 [1, 0]
    27 Oct 2014 8:12:41 pm WindowServer[112]: Found 1 modes for display 0x00000000 [1, 0]
    27 Oct 2014 8:12:41 pm WindowServer[112]: Found 1 modes for display 0x00000000 [1, 0]
    27 Oct 2014 8:12:41 pm WindowServer[112]: Found 1 modes for display 0x00000000 [1, 0]
    27 Oct 2014 8:12:41 pm WindowServer[112]: Found 1 modes for display 0x00000000 [1, 0]
    27 Oct 2014 8:12:41 pm WindowServer[112]: mux_initialize: Couldn't find any matches
    27 Oct 2014 8:12:41 pm WindowServer[112]: Found 26 modes for display 0x00000000 [26, 0]
    27 Oct 2014 8:12:41 pm WindowServer[112]: Found 1 modes for display 0x00000000 [1, 0]
    27 Oct 2014 8:12:41 pm WindowServer[112]: Found 1 modes for display 0x00000000 [1, 0]
    27 Oct 2014 8:12:41 pm WindowServer[112]: Found 1 modes for display 0x00000000 [1, 0]
    27 Oct 2014 8:12:41 pm WindowServer[112]: Found 1 modes for display 0x00000000 [1, 0]
    27 Oct 2014 8:12:41 pm WindowServer[112]: WSMachineUsesNewStyleMirroring: false

    Hi Blotontheland,
    Thanks for the prompt reply. The interesting thing is that my Macbook Pro was upgraded today to Yosemite and I still have the spinning wheel on the start up screen before the login page comes up.

  • I installed Yosemite and now my computer is slow when logging in. Also when I type my password the screen images are distorted. After that my home screen appears and everything seems normal. What can I do to fix this?

    I installed Yosemite and now my computer is slow when logging in. Also when I type my password, a bar appears measuring the process and then all of a sudden the screen images are distorted. After that my home screen appears and everything seems normal. What can I do to fix this?
    Here is what the etrecheck results are:
    Problem description:
    slow at start up, screen is distorted while logging in, it is fine after
    EtreCheck version: 2.1.8 (121)
    Report generated April 5, 2015 at 9:42:01 AM PDT
    Download EtreCheck from http://etresoft.com/etrecheck
    Click the [Click for support] links for help with non-Apple products.
    Click the [Click for details] links for more information about that line.
    Hardware Information: ℹ️
        MacBook Pro (13-inch, Early 2011) (Technical Specifications)
        MacBook Pro - model: MacBookPro8,1
        1 2.3 GHz Intel Core i5 CPU: 2-core
        4 GB RAM Upgradeable
            BANK 0/DIMM0
                2 GB DDR3 1333 MHz ok
            BANK 1/DIMM0
                2 GB DDR3 1333 MHz ok
        Bluetooth: Old - Handoff/Airdrop2 not supported
        Wireless:  en1: 802.11 a/b/g/n
        Battery Health: Normal - Cycle count 297
    Video Information: ℹ️
        Intel HD Graphics 3000 - VRAM: 384 MB
            Color LCD 1280 x 800
    System Software: ℹ️
        OS X 10.10.2 (14C109) - Time since boot: 0:7:0
    Disk Information: ℹ️
        Hitachi HTS545032B9A302 disk0 : (320.07 GB)
            EFI (disk0s1) <not mounted> : 210 MB
            Recovery HD (disk0s3) <not mounted>  [Recovery]: 650 MB
            Macintosh HD (disk1) / : 318.84 GB (174.85 GB free)
                Encrypted AES-XTS Unlocked
                Core Storage: disk0s2 319.21 GB Online
        MATSHITADVD-R   UJ-898
    USB Information: ℹ️
        Apple Inc. Apple Internal Keyboard / Trackpad
        Apple Inc. BRCM2070 Hub
            Apple Inc. Bluetooth USB Host Controller
        Apple Inc. FaceTime HD Camera (Built-in)
        Apple Computer, Inc. IR Receiver
    Thunderbolt Information: ℹ️
        Apple Inc. thunderbolt_bus
    Gatekeeper: ℹ️
        Mac App Store and identified developers
    Kernel Extensions: ℹ️
            /System/Library/Extensions
        [not loaded]    com.devguru.driver.SamsungComposite (1.1.0) [Click for support]
        [not loaded]    com.logmein.driver.LogMeInSoundDriver (1.0.3 - SDK 10.5) [Click for support]
            /System/Library/Extensions/ssuddrv.kext/Contents/PlugIns
        [not loaded]    com.devguru.driver.SamsungACMControl (1.1.0) [Click for support]
        [not loaded]    com.devguru.driver.SamsungACMData (1.1.0) [Click for support]
    Startup Items: ℹ️
        HP Trap Monitor: Path: /Library/StartupItems/HP Trap Monitor
        Startup items are obsolete in OS X Yosemite
    Problem System Launch Daemons: ℹ️
        [failed]    com.apple.ucupdate.plist
        [failed]    com.apple.watchdogd.plist [Click for details]
    Launch Agents: ℹ️
        [not loaded]    com.google.keystone.agent.plist [Click for support]
        [not loaded]    com.hp.help.tocgenerator.plist [Click for support]
        [not loaded]    com.logmein.LMILaunchAgentFixer.plist [Click for support]
        [not loaded]    com.logmein.logmeingui.plist [Click for support]
        [not loaded]    com.logmein.logmeinguiagent.plist [Click for support]
        [not loaded]    com.logmein.logmeinguiagentatlogin.plist [Click for support]
    Launch Daemons: ℹ️
        [not loaded]    com.adobe.fpsaud.plist [Click for support]
        [not loaded]    com.google.keystone.daemon.plist [Click for support]
        [not loaded]    com.logmein.logmeinblanker.plist [Click for support]
        [not loaded]    com.logmein.logmeinserver.plist [Click for support]
        [not loaded]    com.logmein.raupdate.plist [Click for support]
        [not loaded]    com.microsoft.office.licensing.helper.plist [Click for support]
    User Launch Agents: ℹ️
        [not loaded]    com.adobe.ARM.[...].plist [Click for support]
        [not loaded]    com.facebook.videochat.[redacted].plist [Click for support]
        [not loaded]    com.google.GoogleContactSyncAgent.plist [Click for support]
    User Login Items: ℹ️
        iTunesHelper    UNKNOWN Hidden (missing value)
        AdobeResourceSynchronizer    Application Hidden (/Applications/Adobe Reader.app/Contents/Support/AdobeResourceSynchronizer.app)
        Android File Transfer Agent    Application  (/Users/[redacted]/Library/Application Support/Google/Android File Transfer/Android File Transfer Agent.app)
        HP Product Research    Application  (/Library/Application Support/Hewlett-Packard/Customer Participation/HP Product Research.app)
        HPEventHandler    Application  (/Library/Printers/hp/hpio/HPEventHandler.app)
    Internet Plug-ins: ℹ️
        o1dbrowserplugin: Version: 5.40.2.0 - SDK 10.8 [Click for support]
        LogMeInSafari64: Version: 1.0.660 [Click for support]
        Default Browser: Version: 600 - SDK 10.10
        Silverlight: Version: 5.1.10411.0 - SDK 10.6 [Click for support]
        FlashPlayer-10.6: Version: 17.0.0.134 - SDK 10.6 [Click for support]
        LogMeIn: Version: 1.0.660 [Click for support]
        Flash Player: Version: 17.0.0.134 - SDK 10.6 [Click for support]
        LogMeInSafari32: Version: 1.0.660 [Click for support]
        QuickTime Plugin: Version: 7.7.3
        googletalkbrowserplugin: Version: 5.40.2.0 - SDK 10.8 [Click for support]
        AdobePDFViewer: Version: 10.0.1 [Click for support]
        SharePointBrowserPlugin: Version: 14.1.0 [Click for support]
        iPhotoPhotocast: Version: 7.0 - SDK 10.7
    3rd Party Preference Panes: ℹ️
        Flash Player  [Click for support]
    Time Machine: ℹ️
        Time Machine not configured!
    Top Processes by CPU: ℹ️
             7%    ocspd
             4%    WindowServer
             1%    kextd
             0%    ps
             0%    securityd
    Top Processes by Memory: ℹ️
        137 MB    Microsoft Word
        120 MB    Safari
        86 MB    ocspd
        82 MB    CalendarAgent
        77 MB    WindowServer
    Virtual Memory Information: ℹ️
        310 MB    Free RAM
        1.89 GB    Active RAM
        1.55 GB    Inactive RAM
        544 MB    Wired RAM
        1.13 GB    Page-ins
        8 KB    Page-outs
    Diagnostics Information: ℹ️
        Apr 5, 2015, 09:32:47 AM    Self test - passed
        Apr 5, 2015, 09:30:05 AM    /Users/[redacted]/Library/Logs/DiagnosticReports/AdobeResourceSynchronizer_2015 -04-05-093005_[redacted].crash
        Apr 4, 2015, 01:12:41 PM    /Users/[redacted]/Library/Logs/DiagnosticReports/AdobeResourceSynchronizer_2015 -04-04-131241_[redacted].crash
        Apr 4, 2015, 08:13:57 AM    /Users/[redacted]/Library/Logs/DiagnosticReports/AdobeResourceSynchronizer_2015 -04-04-081357_[redacted].crash

    Reinstalling OS X Without Erasing the Drive
    Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
    Reinstalling OS X Without Erasing the Drive
    Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
    When the recovery menu appears select Disk Utility and press the Continue button. After Disk Utility loads select the Macintosh HD entry from the the left side list.  Click on the First Aid tab, then click on the Repair Disk button. If Disk Utility reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit Disk Utility and return to the main menu.
    Reinstall OS X: Select Reinstall OS X and click on the Continue button.
    Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.
    Alternatively, see:
    Reinstall OS X Without Erasing the Drive
    Choose the version you have installed now:
    OS X Yosemite- Reinstall OS X
    OS X Mavericks- Reinstall OS X
    OS X Mountain Lion- Reinstall OS X
    OS X Lion- Reinstall Mac OS X
         Note: You will need an active Internet connection. I suggest using Ethernet
                     if possible because it is three times faster than wireless.

  • System running ridiculously slow after installing Yosemite and Adobe CC

    SInce installing Yosemite and upgrading to Adobe CC for all my design apps, my computer runs soooooo slow. Since then, I've run all the disk utility stuff and upgraded from 8gb to 12gb of RAM. That about ends my knowledge. I ran EntreCheck with report below. Any insight on what to do would be HUGELY appreciated.
    Problem description:
    everything is running soooooooo slow.
    EtreCheck version: 2.1.8 (121)
    Report generated March 20, 2015 at 12:19:11 AM EDT
    Download EtreCheck from http://etresoft.com/etrecheck
    Click the [Click for support] links for help with non-Apple products.
    Click the [Click for details] links for more information about that line.
    Hardware Information: ℹ️<etrecheck://help/hardware>
       iMac (27-inch, Mid 2010) (Technical Specifications)<http://support.apple.com/kb/SP695>
       iMac - model: iMac11,3
       1 2.8 GHz Intel Core i5 CPU: 4-core
       12 GB RAM Upgradeable
           BANK 0/DIMM0
               4 GB DDR3 1333 MHz ok
           BANK 1/DIMM0
               4 GB DDR3 1333 MHz ok
           BANK 0/DIMM1
               2 GB DDR3 1333 MHz ok
           BANK 1/DIMM1
               2 GB DDR3 1333 MHz ok
       Bluetooth: Old - Handoff/Airdrop2 not supported
       Wireless:  en1: 802.11 a/b/g/n
    Video Information: ℹ️<etrecheck://help/video>
       ATI Radeon HD 5750 - VRAM: 1024 MB
           iMac 2560 x 1440
    System Software: ℹ️<etrecheck://help/systemsoftware>
       OS X 10.10.2 (14C109) - Time since boot: 1:33:15
    Disk Information: ℹ️<etrecheck://help/disk>
       WDC WD1001FALS-40Y6A0 disk0 : (1 TB)
           EFI (disk0s1) <not mounted> : 210 MB
           Macintosh HD (disk0s2) / : 999.35 GB (586.39 GB free)
           Recovery HD (disk0s3) <not mounted>  [Recovery]: 650 MB
       HL-DT-STDVDRW  GA32N
    USB Information: ℹ️<etrecheck://help/usb>
       Apple Inc. BRCM2046 Hub
           Apple Inc. Bluetooth USB Host Controller
       Apple Internal Memory Card Reader
       Apple Inc. Built-in iSight
       Apple Computer, Inc. IR Receiver
    Configuration files: ℹ️<etrecheck://help/configurationfiles>
       /etc/hosts - Count: 30
    Gatekeeper: ℹ️<etrecheck://help/gatekeeper>
       Mac App Store and identified developers
    Launch Agents: ℹ️<etrecheck://help/launchagents>
       [not loaded]    com.adobe.AAM.Updater-1.0.plist [Click for support]<http://www.google.com/search?q=com.adobe.AAM.Updater-1.0.plist+support+site:adob e.com>
       [loaded]    com.adobe.AdobeCreativeCloud.plist [Click for support]<http://www.google.com/search?q=com.adobe.AdobeCreativeCloud.plist+support+site:a dobe.com>
       [loaded]    com.adobe.CS5ServiceManager.plist [Click for support]<http://www.google.com/search?q=com.adobe.CS5ServiceManager.plist+support+site:ad obe.com>
       [loaded]    com.google.keystone.agent.plist [Click for support]<http://www.google.com/search?q=com.google.keystone.agent.plist+support+site:goog le.com>
       [loaded]    com.hp.help.tocgenerator.plist [Click for support]<http://www.google.com/search?q=com.hp.help.tocgenerator.plist+support+site:hp.co m>
       [loaded]    com.intego.backupassistant.agent.plist [Click for support]<http://www.google.com/search?q=com.intego.backupassistant.agent.plist+support+si te:intego.com>
    Launch Daemons: ℹ️<etrecheck://help/launchdaemons>
       [loaded]    com.adobe.fpsaud.plist [Click for support]<http://www.google.com/search?q=com.adobe.fpsaud.plist+support+site:adobe.com>
       [loaded]    com.adobe.SwitchBoard.plist [Click for support]<http://www.google.com/search?q=com.adobe.SwitchBoard.plist+support+site:adobe.co m>
       [loaded]    com.google.keystone.daemon.plist [Click for support]<http://www.google.com/search?q=com.google.keystone.daemon.plist+support+site:goo gle.com>
       [running]    com.intego.BackupAssistant.daemon.plist [Click for support]<http://www.google.com/search?q=com.intego.BackupAssistant.daemon.plist+support+s ite:intego.com>
       [loaded]    com.quark.quarkupdate.plist [Click for support]<http://www.google.com/search?q=com.quark.quarkupdate.plist+support+site:quark.co m>
    User Launch Agents: ℹ️<etrecheck://help/userlaunchagents>
       [loaded]    com.adobe.ARM.[...].plist [Click for support]<http://www.google.com/search?q=com.adobe.ARM.78cc0ca4390391ccbf3e6ae7434b49da845 cbb801c17ced9d324e9da.plist+support+site:adobe.com>
       [running]    com.akamai.single-user-client.plist [Click for support]<http://www.google.com/search?q=com.akamai.single-user-client.plist+support+site: akamai.com>
       [failed]    com.apple.CSConfigDotMacCert-[...]@me.com<http://me.com>-SharedServices.Agent.plist
       [running]    com.spotify.webhelper.plist [Click for support]<http://www.google.com/search?q=com.spotify.webhelper.plist+support+site:spotify. com>
    User Login Items: ℹ️<etrecheck://help/loginitems>
       Spotify    Application Hidden (/Applications/Spotify.app)
    Internet Plug-ins: ℹ️<etrecheck://help/internetplugins>
       o1dbrowserplugin: Version: 5.40.2.0 - SDK 10.8 [Click for support]<http://www.google.com/search?q=support+site:google.com>
       Google Earth Web Plug-in: Version: 7.1 [Click for support]<http://www.google.com/search?q=Google%20Earth%20Plugin.plugin+support+site:Googl e.com>
       Default Browser: Version: 600 - SDK 10.10
       CouponPrinter-FireFox: Version: Version 1.1.5
       AdobeAAMDetect: Version: AdobeAAMDetect 2.0.0.0 - SDK 10.7 [Click for support]<http://www.google.com/search?q=support+site:AdobeAAMDetectLib.com>
       FlashPlayer-10.6: Version: 17.0.0.134 - SDK 10.6 [Click for support]<http://www.google.com/search?q=FlashPlayer-10.6+support+site:macromedia.com>
       Silverlight: Version: 5.1.20125.0 - SDK 10.6 [Click for support]<http://www.google.com/search?q=support+site:microsoft.com>
       Flash Player: Version: 17.0.0.134 - SDK 10.6 [Click for support]<http://www.google.com/search?q=Flash%20Player+support+site:macromedia.com>
       QuickTime Plugin: Version: 7.7.3
       googletalkbrowserplugin: Version: 5.40.2.0 - SDK 10.8 [Click for support]<http://www.google.com/search?q=support+site:google.com>
       iPhotoPhotocast: Version: 7.0
       AdobePDFViewer: Version: 9.5.5 [Click for support]<http://www.google.com/search?q=AdobePDFViewer+support+site:adobe.com>
       JavaAppletPlugin: Version: 15.0.0 - SDK 10.10 Check version<http://www.java.com/en/download/installed.jsp>
    3rd Party Preference Panes: ℹ️<etrecheck://help/preferencepanes>
       Akamai NetSession Preferences  [Click for support]<http://www.google.com/search?q=Akamai%20NetSession%20Preferences+support+site:yo urcompany.com>
       Flash Player  [Click for support]<http://www.google.com/search?q=Flash%20Player+support+site:adobe.com>
       Growl  [Click for support]<http://www.google.com/search?q=Growl+support+site:growl.com>
       Paragon NTFS for Mac ® OS X  [Click for support]<http://www.google.com/search?q=Paragon%20NTFS%20for%20Mac%20%C2%AE%20OS%20X+supp ort+site:paragon-software.com>
       Quark Update Preferences  [Click for support]<http://www.google.com/search?q=Quark%20Update%20Preferences+support+site:quark.c om>
    Time Machine: ℹ️<etrecheck://help/timemachine>
       Skip System Files: NO
       Auto backup: NO - Auto backup turned off
       Volumes being backed up:
           Macintosh HD: Disk size: 999.35 GB Disk used: 412.95 GB
       Destinations:
           LaCie [Local]
           Total size: 2.00 TB
           Total number of backups: 18
           Oldest backup: 2014-12-10 04:43:29 +0000
           Last backup: 2015-03-07 20:22:58 +0000
           Size of backup disk: Adequate
               Backup size 2.00 TB > (Disk used 412.95 GB X 3)
    Top Processes by CPU: ℹ️<etrecheck://help/cpu>
            1%    sysmond
            0%    fontd
            0%    Activity Monitor
            0%    SystemUIServer
            0%    mds
    Top Processes by Memory: ℹ️<etrecheck://help/memory>
       206 MB    mds_stores
       103 MB    WindowServer
       77 MB    Finder
       77 MB    com.apple.WebKit.WebContent
       64 MB    Activity Monitor
    Virtual Memory Information: ℹ️<etrecheck://help/vm>
       9.44 GB    Free RAM
       1.99 GB    Active RAM
       622 MB    Inactive RAM
       827 MB    Wired RAM
       1.87 GB    Page-ins
       0 B    Page-outs
    Diagnostics Information: ℹ️<etrecheck://help/diagnostics>
       Mar 19, 2015, 11:42:51 PM    /Library/Logs/DiagnosticReports/com.apple.WebKit.WebContent_2015-03-19-234251_[ redacted].hang
       Mar 19, 2015, 10:36:03 PM    Self test - passed
       Mar 18, 2015, 09:49:31 PM    /Library/Logs/DiagnosticReports/Microsoft Word_2015-03-18-214931_[redacted].hang
       Mar 18, 2015, 06:09:50 PM    /Library/Logs/DiagnosticReports/AdobeAcrobat_2015-03-18-180950_[redacted].hang
       Mar 18, 2015, 03:13:06 PM    /Library/Logs/DiagnosticReports/System Preferences_2015-03-18-151306_[redacted].hang
       Mar 18, 2015, 03:12:39 PM    /Library/Logs/DiagnosticReports/Spotify_2015-03-18-151239_[redacted].hang
       Mar 18, 2015, 03:10:52 PM    /Library/Logs/DiagnosticReports/Safari_2015-03-18-151052_[redacted].hang
       Mar 17, 2015, 10:39:53 PM    /Library/Logs/DiagnosticReports/Microsoft Word_2015-03-17-223953_[redacted].hang
       Mar 17, 2015, 08:28:02 AM    /Library/Logs/DiagnosticReports/Safari_2015-03-17-082802_[redacted].hang

    Thanks so much for the detailed instructions...but they didn't seem to work.
    At this point I've erased the drive and reinstalled Yosemite. I haven't brought any files or applications back in yet, but things are still moving really slow. Here's my latest EntreCheck report. Any insight would be very helpful.
    Problem description:
    sytstem, even after a bringing it back to factory settings, is still running really really slow
    EtreCheck version: 2.1.8 (121)
    Report generated March 22, 2015 at 11:23:25 PM EDT
    Download EtreCheck from http://etresoft.com/etrecheck
    Click the [Click for support] links for help with non-Apple products.
    Click the [Click for details] links for more information about that line.
    Hardware Information: ℹ️
        iMac (27-inch, Mid 2010) (Technical Specifications)
        iMac - model: iMac11,3
        1 2.8 GHz Intel Core i5 CPU: 4-core
        12 GB RAM Upgradeable
            BANK 0/DIMM0
                4 GB DDR3 1333 MHz ok
            BANK 1/DIMM0
                4 GB DDR3 1333 MHz ok
            BANK 0/DIMM1
                2 GB DDR3 1333 MHz ok
            BANK 1/DIMM1
                2 GB DDR3 1333 MHz ok
        Bluetooth: Old - Handoff/Airdrop2 not supported
        Wireless:  en1: 802.11 a/b/g/n
    Video Information: ℹ️
        ATI Radeon HD 5750 - VRAM: 1024 MB
            iMac 2560 x 1440
    System Software: ℹ️
        OS X 10.10.2 (14C109) - Time since boot: 1:28:31
    Disk Information: ℹ️
        WDC WD1001FALS-40Y6A0 disk0 : (1 TB)
            EFI (disk0s1) <not mounted> : 210 MB
            Macintosh HD (disk0s2) / : 999.35 GB (989.92 GB free)
            Recovery HD (disk0s3) <not mounted>  [Recovery]: 650 MB
        HL-DT-STDVDRW  GA32N 
    USB Information: ℹ️
        Apple Inc. Built-in iSight
        Apple Computer, Inc. IR Receiver
        Apple Internal Memory Card Reader
        Apple Inc. BRCM2046 Hub
            Apple Inc. Bluetooth USB Host Controller
    Gatekeeper: ℹ️
        Mac App Store and identified developers
    User Login Items: ℹ️
        None
    Internet Plug-ins: ℹ️
        Default Browser: Version: 600 - SDK 10.10
        QuickTime Plugin: Version: 7.7.3
    3rd Party Preference Panes: ℹ️
        None
    Time Machine: ℹ️
        Time Machine not configured!
    Top Processes by CPU: ℹ️
             2%    WindowServer
             0%    launchd
             0%    dpd
    Top Processes by Memory: ℹ️
        155 MB    mds_stores
        129 MB    softwareupdated
        103 MB    Dock
        64 MB    Finder
        64 MB    com.apple.WebKit.WebContent
    Virtual Memory Information: ℹ️
        8.51 GB    Free RAM
        2.13 GB    Active RAM
        1.24 GB    Inactive RAM
        1.00 GB    Wired RAM
        2.36 GB    Page-ins
        0 B    Page-outs
    Diagnostics Information: ℹ️
        Mar 22, 2015, 09:49:57 PM    Self test - passed

Maybe you are looking for

  • ### in XI Payload

    Hi Experts, We are facing a critical issue in our productive environment. The output after mapping in XI has the character '#' filled up completely meaning the entire payload is filled with '#' We have a multicluster server environment and this might

  • Main component in a JFrame?

    Hi all, Just wondering, how do you set the main component in a JFrame (or JDialog). The main component being the component that gets activated when you hit the enter key. thanks, J

  • Wrong PO number displaying in check printing (FBZ5)

    Dear all, In FBZ5, check printing, we are getting the wrong PO no in the check. Remaining all document nos and amount is displaying correctly. With reference to the PO we are created the invoice receipt and saved perfectly. But in check printing it i

  • Oracle Projects 11.5.10.2 : Generate Invoice at the lowest task level...

    Oracle Projects: 11.5.10.2. We are trying to figure out if we can generate an Invoice at the lowest task level. When I looked at the invoice format there was no option to group by at lowest Invoice level However I looked at one of the documents of pr

  • Unix script error while mail the pdf file.

    Hi all, I want to do a mail in pdf format via a unix script. for that i used the following query: # Verplichte variabelen inputname="dago130r.rdf" outputname="$DATOUT/dago130rDC.pdf" mailto="$MAIL_INKOOP_DC" subject="Opgeloste PV's per Category Manag