Yosemite and Mac Pro 2012

Ever since I updated, last Thursday, to Yosemite (on my Mac Pro 2012), I am now listed ON MY OWN COMPUTER as "Standard," not ADMINISTRATOR, which I am and have always been!  Therefore, I can't open many panes in System Preferences or change any settings in it.
I have re-installed Yosemite TWICE (after restarting and/or shutting down several times) and, after the reinstall, I get the "Log In" page and NO OTHER SET UP PAGES!  I can't seem to set myself up as the administrator, in order to manage my OWN computer - a Mac Pro 12-core, 2012.  I even changed my password to this computer.  HELP!

Hey aniMix,
Thanks for the question. I understand that you are experiencing issues with AirDrop. The following resource provides some troubleshooting information which may be helpful:
Mac Basics: AirDrop lets you send files from your Mac to nearby Macs and iOS devices
http://support.apple.com/kb/HT6510
Thanks,
Matt M.

Similar Messages

  • Severe Incompatibility between Mac Pro 2012 power supply and Tripp Lite 2400 watt Line Conditioner [switching transformer].

    Severe Incompatibility between Mac Pro 2012 power supply and Tripp Lite LC2400 [switching transformer].
    The Mac Pro will not power on when connected to the Tripp Lite LC2400. The Power Supply makes continuous clicking noises and repeatedly resets the Mac Pro every 3 seconds.
    The same Mac Pro connected to an outlet with no Tripp Lite starts up with no problem.

    Hi,
    I've the same notebook. I've not had any hardlocks so far, but I've not seen so much flash movies yet. Anyway, I just tried closing running youtube-video tab on Kde4 + enabled desktop effects -> Everything's fine.
    Anyway, perhaps we can collect some issues and solutions in this thread. Here are problems, that I encounter:
    - restart does not work
    - errors during boot:
    [ 2.399277] pnp 00:0b: [irq 23]
    [ 2.399308] pnp 00:0b: Plug and Play ACPI device, IDs SMO8800 (active)
    [ 2.932179] pnp 00:0c: can't evaluate _CRS: 12311
    [ 14.616662] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.07
    [ 14.616771] iTCO_wdt: Found a Cougar Point TCO device (Version=2, TCOBASE=0x0460)
    [ 14.616792] iTCO_wdt: cannot register miscdev on minor=130 (err=-16)
    [ 14.616904] iTCO_wdt: probe of iTCO_wdt failed with error -16
    [ 9.262898] sdhci-pci 0000:0b:00.1: SDHCI controller found [1217:8321] (rev 5)
    [ 9.262920] sdhci-pci 0000:0b:00.1: PCI INT B -> GSI 18 (level, low) -> IRQ 18
    [ 9.262966] sdhci-pci 0000:0b:00.1: Invalid iomem size. You may experience problems.
    [ 9.263176] sdhci-pci 0000:0b:00.1: setting latency timer to 64
    Issued solved:
    - in order to make nvidia graphics working you have to disable Optimius in BIOS.
    - Battery not recognized -- fixed after recend updates
    - grub2 does not work. As soon as grub2 loads, the laptop reboots. -> stick to grub1  --  works now (either I did sth wrong the first time or a new version of grub2 fixes this issue)
    - in order to make the touchpad work properly install psmouse-elantech from AUR
       update: this is only a half-solution. vertical scrolling on the right edge works but graphical tools which rely on x11-input-synpatics still don't work. However, everything works fine with kernel 3.3. Once this in the main arch repos you won't need psmouse-elantech anymore.
    Last edited by knue (2012-03-06 23:26:26)

  • 4K Monitor and Display card for a Mac Pro 2012.

    I am looking for a 4K monitor and a Display Card for my Mac Pro 2012. Do you guys recommend any that is presently available in market?

    <http://store.apple.com/us/product/HA959LL/A/nvidia-quadro-k5000-gpu-for-mac>

  • Mac Pro 2012 crashes regularly after loading Mavericks

    I upgraded the OS to Mavericks, direct from Lion, on my Mac Pro 2012 computer, since when it crashes and restarts spontaneously. Herewith the reports. Can anyone offer a straightforward solution? There is no sign of Google inspired crashes, as with other users. Is Mavericks named to draw attention to its spontaneous behaviour??
    Anonymous UUID:       160508A3-8E94-9871-46A5-CEA574629558
    Wed Nov 27 14:28:10 2013
    panic(cpu 6 caller 0xffffff8000f683ca): "hfs_vnop_link: error 2 updating vp @ 0xffffff8023dacd20\n"@/SourceCache/xnu/xnu-2422.1.72/bsd/hfs/hfs_link.c:648
    Backtrace (CPU 6), Frame : Return Address
    0xffffff80f17cb9c0 : 0xffffff8000c22f69
    0xffffff80f17cba40 : 0xffffff8000f683ca
    0xffffff80f17cbb70 : 0xffffff8000dfde97
    0xffffff80f17cbbe0 : 0xffffff8000de73fe
    0xffffff80f17cbf50 : 0xffffff800103de23
    0xffffff80f17cbfb0 : 0xffffff8000cf3e06
    BSD process name corresponding to current thread: backupd
    Mac OS version:
    13A603
    Kernel version:
    Darwin Kernel Version 13.0.0: Thu Sep 19 22:22:27 PDT 2013; root:xnu-2422.1.72~6/RELEASE_X86_64
    Kernel UUID: 1D9369E3-D0A5-31B6-8D16-BFFBBB390393
    Kernel slide:     0x0000000000a00000
    Kernel text base: 0xffffff8000c00000
    System model name: MacPro5,1 (Mac-F221BEC8)
    System uptime in nanoseconds: 2378466306395
    last loaded kext at 436235880056: com.apple.filesystems.afpfs          11.0 (addr 0xffffff7f830f9000, size 348160)
    last unloaded kext at 324165521783: com.apple.filesystems.msdosfs          1.9 (addr 0xffffff7f830db000, size 57344)
    loaded kexts:
    com.apple.filesystems.afpfs          11.0
    com.apple.nke.asp-tcp          8.0.0
    com.apple.driver.AppleHWSensor          1.9.5d0
    com.apple.driver.AppleTyMCEDriver          1.0.2d2
    com.apple.driver.AGPM          100.14.11
    com.apple.filesystems.autofs          3.0
    com.apple.driver.AudioAUUC          1.60
    com.apple.driver.AppleUpstreamUserClient          3.5.13
    com.apple.driver.AppleMCCSControl          1.1.12
    com.apple.driver.AppleUSBOpticalMouse          650.4.0
    com.apple.driver.AppleUSBDisplays          360.8.14
    com.apple.iokit.IOUserEthernet          1.0.0d1
    com.apple.driver.AppleMikeyHIDDriver          124
    com.apple.kext.AMDFramebuffer          1.1.4
    com.apple.driver.AppleHDA          2.5.2fc2
    com.apple.iokit.IOBluetoothSerialManager          4.2.0f6
    com.apple.driver.AppleMikeyDriver          2.5.2fc2
    com.apple.AMDRadeonX3000          1.1.4
    com.apple.iokit.BroadcomBluetoothHostControllerUSBTransport          4.2.0f6
    com.apple.Dont_Steal_Mac_OS_X          7.0.0
    com.apple.driver.AppleLPC          1.7.0
    com.apple.kext.AMD5000Controller          1.1.4
    com.apple.driver.AppleHWAccess          1
    com.apple.driver.ACPI_SMC_PlatformPlugin          1.0.0
    com.apple.driver.XsanFilter          404
    com.apple.iokit.IOAHCIBlockStorage          2.4.0
    com.apple.iokit.SCSITaskUserClient          3.6.0
    com.apple.AppleFSCompression.AppleFSCompressionTypeDataless          1.0.0d1
    com.apple.AppleFSCompression.AppleFSCompressionTypeZlib          1.0.0d1
    com.apple.BootCache          35
    com.apple.driver.AppleUSBHub          650.4.4
    com.apple.driver.AppleFWOHCI          4.9.9
    com.apple.driver.Intel82574L          2.6.1b1
    com.apple.driver.AirPort.Brcm4331          700.20.22
    com.apple.driver.AppleAHCIPort          2.9.5
    com.apple.driver.AppleUSBEHCI          650.4.1
    com.apple.driver.AppleUSBUHCI          650.4.0
    com.apple.driver.AppleRTC          2.0
    com.apple.driver.AppleHPET          1.8
    com.apple.driver.AppleACPIButtons          2.0
    com.apple.driver.AppleSMBIOS          2.0
    com.apple.driver.AppleACPIEC          2.0
    com.apple.driver.AppleAPIC          1.7
    com.apple.driver.AppleIntelCPUPowerManagementClient          216.0.0
    com.apple.nke.applicationfirewall          153
    com.apple.security.quarantine          3
    com.apple.driver.AppleIntelCPUPowerManagement          216.0.0
    com.apple.security.SecureRemotePassword          1.0
    com.apple.kext.triggers          1.0
    com.apple.driver.AppleUSBAudio          2.9.3f17
    com.apple.iokit.IOSurface          91
    com.apple.driver.DspFuncLib          2.5.2fc2
    com.apple.vecLib.kext          1.0.0
    com.apple.iokit.IOAudioFamily          1.9.4fc11
    com.apple.kext.OSvKernDSPLib          1.14
    com.apple.iokit.IONDRVSupport          2.3.6
    com.apple.iokit.IOSerialFamily          10.0.7
    com.apple.iokit.IOAcceleratorFamily          98.7.1
    com.apple.iokit.IOBluetoothFamily          4.2.0f6
    com.apple.driver.AppleSMBusController          1.0.11d1
    com.apple.iokit.IOFireWireIP          2.2.5
    com.apple.iokit.IOBluetoothHostControllerUSBTransport          4.2.0f6
    com.apple.driver.AppleHDAController          2.5.2fc2
    com.apple.iokit.IOHDAFamily          2.5.2fc2
    com.apple.driver.AppleSMBusPCI          1.0.12d1
    com.apple.kext.AMDSupport          1.1.4
    com.apple.AppleGraphicsDeviceControl          3.4.12
    com.apple.iokit.IOGraphicsFamily          2.3.6
    com.apple.driver.AppleSMC          3.1.6d1
    com.apple.driver.IOPlatformPluginLegacy          1.0.0
    com.apple.driver.IOPlatformPluginFamily          5.5.1d27
    com.apple.driver.AppleUSBHIDKeyboard          170.15
    com.apple.driver.AppleHIDKeyboard          170.15
    com.apple.iokit.IOUSBHIDDriver          650.4.4
    com.apple.iokit.IOSCSIBlockCommandsDevice          3.6.0
    com.apple.iokit.IOUSBMassStorageClass          3.6.0
    com.apple.driver.AppleUSBMergeNub          650.4.0
    com.apple.driver.AppleUSBComposite          650.4.0
    com.apple.iokit.IOSCSIMultimediaCommandsDevice          3.6.0
    com.apple.iokit.IOBDStorageFamily          1.7
    com.apple.iokit.IODVDStorageFamily          1.7.1
    com.apple.iokit.IOCDStorageFamily          1.7.1
    com.apple.iokit.IOAHCISerialATAPI          2.6.0
    com.apple.iokit.IOSCSIArchitectureModelFamily          3.6.0
    com.apple.iokit.IOFireWireFamily          4.5.5
    com.apple.iokit.IO80211Family          600.34
    com.apple.iokit.IONetworkingFamily          3.2
    com.apple.iokit.IOUSBUserClient          650.4.4
    com.apple.iokit.IOAHCIFamily          2.6.0
    com.apple.iokit.IOUSBFamily          650.4.4
    com.apple.driver.AppleEFINVRAM          2.0
    com.apple.driver.AppleEFIRuntime          2.0
    com.apple.iokit.IOHIDFamily          2.0.0
    com.apple.iokit.IOSMBusFamily          1.1
    com.apple.security.sandbox          278.10
    com.apple.kext.AppleMatch          1.0.0d1
    com.apple.security.TMSafetyNet          7
    com.apple.driver.AppleKeyStore          2
    com.apple.driver.DiskImages          371.1
    com.apple.iokit.IOStorageFamily          1.9
    com.apple.iokit.IOReportFamily          21
    com.apple.driver.AppleFDEKeyStore          28.30
    com.apple.driver.AppleACPIPlatform          2.0
    com.apple.iokit.IOPCIFamily          2.8
    com.apple.iokit.IOACPIFamily          1.4
    com.apple.kec.pthread          1
    com.apple.kec.corecrypto          1.0
    Model: MacPro5,1, BootROM MP51.007F.B03, 8 processors, Quad-Core Intel Xeon, 2.4 GHz, 8 GB, SMC 1.39f11
    Graphics: ATI Radeon HD 5770, ATI Radeon HD 5770, PCIe, 1024 MB
    Memory Module: DIMM 1, 2 GB, DDR3 ECC, 1066 MHz, 0x80AD, 0x484D54313235553754465238432D48392020
    Memory Module: DIMM 2, 2 GB, DDR3 ECC, 1066 MHz, 0x80AD, 0x484D54313235553754465238432D48392020
    Memory Module: DIMM 5, 2 GB, DDR3 ECC, 1066 MHz, 0x80AD, 0x484D54313235553754465238432D48392020
    Memory Module: DIMM 6, 2 GB, DDR3 ECC, 1066 MHz, 0x80AD, 0x484D54313235553754465238432D48392020
    AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0x8E), Broadcom BCM43xx 1.0 (5.106.98.100.22)
    Bluetooth: Version 4.2.0f6 12982, 3 services, 23 devices, 2 incoming serial ports
    Network Service: Ethernet 1, Ethernet, en0
    Network Service: Wi-Fi, AirPort, en2
    PCI Card: ATI Radeon HD 5770, Display Controller, Slot-1
    Serial ATA Device: HL-DT-ST DVD-RW GH61N
    Serial ATA Device: WDC WD1001FALS-41Y6A1, 1 TB
    Serial ATA Device: WDC WD1001FALS-41Y6A1, 1 TB
    USB Device: Hub
    USB Device: Hub
    USB Device: Display Audio
    USB Device: Display iSight
    USB Device: Apple LED Cinema Display
    USB Device: USB2.0 Hub
    USB Device: USB2.0 MFP(Hi-Speed)
    USB Device: Keyboard Hub
    USB Device: Apple Keyboard
    USB Device: Apple Optical USB Mouse
    USB Device: BRCM2046 Hub
    USB Device: Bluetooth USB Host Controller
    FireWire Device: built-in_hub, Up to 800 Mb/sec
    Thunderbolt Bus:

    See this answer here: https://discussions.apple.com/message/24360177#24360177
    "The Time Machine backup data on the network device is corrupt."
    Go there for the details.

  • Migration Assistant: Problems transferring data from PC (XP SP3) to new Mac Pro 2012 - can not get Migration Assistant to work as PC will not display verfify passcode

    Migration Assistant: Problems transferring data from PC (XP SP3) to new Mac Pro 2012 - can not get Migration Assistant to work as PC will not display verfify passcode
    Hello, I am having problems migrating data from my old PC running XP (SP3) to my new Mac Pro 2012 using the Migration Assistant.
    - I downloaded and installed the Windows Migration Assistant from Apple
    - My Mac recognized PC and displays passcode
    - The sasscode does not show / display on my PC
    - My Mac is then stuck in "authenticating" loop and the PC is stuck "waiting for Mac to connect."
    - Both computers are connected on same network (have connected PC on WIFI and using ethernet to Reuter)
    I have looked on support site and only response I saw says to reinstall Windows Migration Assistant (which I have done)
    Any ideas?  If cant get this to workare there instructions for manually bring across relevant data eg itunes music and apps, photos, picasa data etc?

    Why not turn off the Windows firewall and uninstall any other firewall software you have installed?
    If you are using a Norton product uninstall it and discard it. To fully unistall most Norton products you have to go to the Norton website and download a soecial program to completely get rid of it. The normal uninstall feature built into the program will not remove all of it.

  • Need help with new Mac Pro (2012)

    Hi for everyone!
    Few days ago, I bought a new Mac Pro (Mid 2012) MD770LL/A for my recording studio. The workstation is really powerfull and silent, but it has one major problem for me: computer comes with pre-installed Mac OS X 10.7.3 Lion, and as I understand, I can't install Mac OS X 10.6.8 on this machine. In this case, some plug-ins and instruments, that critical for my works are unavailable for me now. For example - MusicLab RealGuitar and RealLPC thru the VST to RTAS adapter (I'm using Pro Tools in my studio) don't working correctly on a Lion OSX. Unfortunately, I can't find any solution, to fix it... Even on an official support website of that software developers. Secondary, I still need Rosetta for some applications.
    In that situation, my studio can't fully work.
    So, what I should do??? WHY is officialy impossible to install Mac OS X 10.6.8 on a new Mac Pro, if its components is absolutely identic with Mac Pro 2010, that supported Mac OS X Snow Leo???
    Thanks!
    With a big hope for a help!
    Alexey

    Hi!
    Good news for anyone, who wants to install Mac OS X 10.6.x on a Mac Pro 2012!!!
    As it turned out, the original installation DVD disc from the Mac Pro 2010, fully compatible with Mac Pro 2012! The images of DVD is quite possible to find on the Internet. Just checked on my system - boot from the fresh-burned disc, and Mac OS X 10.6.4 installed without problems! After that, updated to 10.6.8 - and it works!
    Personally for me - it is great news!
    Everyone have a nice day! Thanks!:-)

  • HT4628 I can not use the internal wireless card with my Mac pro 2012, I don't know if it is broken

    I can not use the internal wireless card with my Mac pro 2012, I don't know if it is broken. The problem is happen recently, I have to use an independent wireless card now. Thanks!

    When you enable Internet Sharing in OS X, you are creating a separate sub-net.
    There is no option to allow this to be a simple pass-through from Ethernet to AirPort (or the other way).
    The problem is easily solved by getting an inexpensive wireless router. You can replace your current router OR disable the DHCP server on the wireless router and allow the wireless clients to get an IP address from the current router.

  • Mac Pro 2012

    I bought a new mac pro 2012-12 core w/12GB memory. I like to add 2-4GB memory sticks. In which slots should I install the 2-4GB memory sticks?
    Thank you,
    Richard

    I bought 4-8GB memory sticks from OWC for the mac pro 2012. Installed the 8GB mem stick in slot 1,2,3,4 and the 2GB mem sticks in slot 5,6,7 and 8. booted up the mac pro and got memory slot utility message. Should install the 8GB sticks in slots 1,2,5,6 and fill the rest the 2GB sticks. Did that that and booted up the mac pro however it took over a min to boot up and thats with a SSD drive. It took about 1 min to load FCPX and it woould take forver to render. Tested the memory, tested OK . Took out the memory and reinstalled the 2GB sticks in slots 1,2,3,5,6 and 7. Rebooted the MP STRTED RIGHT UP AS DID FCPX. Sent memory back to OWC, got a refund and bought 2-4GB memory sticks from the apple store. I just want to make sure I install them in the right slots.
    Thank you,
    Richard

  • Audition CC - Compatibility with Mac Pro 2012 (Quad-Core) & RME UFX

    I am new here and wanting to use Audition again after being away for years, so I apologize if this is a dumb question. In previewing a training video about Audition CC it highlighted that Audition CC is now 64 bit.  Before I download CC I want to be sure that the 64 bit part does not present a problem for me on my system.  I do not know if my hardware is 32 or 64 bit.  My question is - Will I have any compatibility issues with my hardware: Mac Pro 2012 Quad-Core & RME UFX interface and the Audition CC software?  Thanks for any light you can shed on this for me.

    It's not the hardware you want to worry about (that will be 64-bit capable, as all Macs are) but the software. If it's a recent Mac I don't think you'll have any problems at all, though - do they actually do a 32-bit release?
    The best thing to do if you're worried about this is to download the trial version and see if that's okay.

  • Can't Get MacBook Pro and Mac Pro to Network

    I have a MacBook Pro (2008 - 2.5 Ghz. Core 2 Duo with 4 Gb of RAM running OS X 10.6.7) that I have been connecting to my Mac Pro (2005 - 2 2.66 Ghz Xeon with 20 Gb of RAM running OS X 10.6.7) through an Ethernet switch on my school's network. This has worked without a hitch for years, but when I upgraded to 10.6.7 recently, the MacBook and Mac Pro fail to network. On the MacBook Pro, the Mac Pro's icon doesn't show in the shared area, and on the Mac Pro, I can see the icon for the MacBook Pro, but when I click on the icon to connect, I get the message that "Connection Failed There was an error connecting to the server (name of my MacBook Pro). Check the server name or IP address, and then try again." I have tried a direct connect using the "Connect to Server" under the Go menu on both machines, using their IP addresses, but no luck. Is there something I need to re-set to get these two to talk again? I have other Macs on the same network that my MacBook and my Mac Pro can see, and both machines can connect to them. They just can't connect to each other.
    Thanks in advance for any ideas you might have on  how to fix this.

    I fixed the problem by re-setting the default values for my VirusBarrier X6 anti-virus program.

  • HT5219 did thunderbolt display worked with mac pro 2012 12 core ??

    i buy mac pro 2012 12 core with thunderbolt display so how i can maake it work with us ??

    Welcome to the Apple Support Communities
    If you want to use a Thunderbolt Display with your 2012 MacBook Pro, you can do it without any problem because your MacBook Pro has got a Thunderbolt port.
    If you need help to set up the Thunderbolt Display, see its user guide > http://manuals.info.apple.com/en_US/thunderbolt_display_getting_started.pdf
    Instead, if you have a Mac Pro (it looks like you have a Mac Pro because you say that it has got 12 cores), you can't use the Thunderbolt Display because the Mac Pro hasn't got Thunderbolt ports. Instead, you have to use the LED Cinema Display

  • Contacts Sync - I have my contacts on iphone5 and MacBook Pro 2012.  I just purchased a MacBook Air 2013 and want the same contacts on that device.  What is the best way to do this?  Non-techie.  Thanks

    I have my contacts on iphone5 and MacBook Pro 2012.  I just purchased a MacBook Air 2013 and want the same contacts on that device.  What is the best way to do this?  Non-techie.  Thanks

    Follow the instructions for enabling your iCloud account on the MBAir here >  Apple - iCloud - Learn how to set up iCloud on all your devices.

  • Is it OK to use USB 2.0 connection for Glyph external drive and Mac Pro as project drive?

    Is it OK to use a USB 2.0 connection for Glyph external drive and Mac Pro as project drive? I was told by Sweetwater tech support to use Firewire, but both the FW400 and FW800 connections crash my audio interface software mixer (Presonus' "Universal Control" software).
    Both Firewire connections also create a 10 second hang for each Command-Save that I do.
    USB 2.0 for the external drive seems to be working so far, but is there some reason I should be wary of using this as my go-to project drive? In other words, I am imagining that there was probably some definite reason that the tech support guy mentioned not to use it. But maybe not. It's a brand new Glyph. In any event, it's nice to have the 10 second hang eliminated, and I was just looking for some advice, since digging into the Presonus software issue could take some time.

    If you have a mac pro, why not stick the external HDD inside via one of your many SATA cables & have it run 9 times faster than your USB?
    Or stick a HDD CADDY in your mac pro, so you can slot in a full sized 3TB HDD for recording, and when you are done, pull it out & slip it in an external enclosure if you need to take it places?

  • I have Iphone 5 and mac pro, and i want to transfer pics through idrop. but my iphone not detect the mac pro. How i can turn the idrop on my computer?

    I have Iphone 5 and mac pro, and i want to transfer pics through idrop. but my iphone not detect the mac pro. How i can turn the idrop on my computer?

    The Mac Pro - the desktop computer - does not support Airdrop, if that's what you mean.
    Matt

  • Lacie Speakers and Mac Pro Firewire problem waking from sleep and loud feed

    Lacie Speakers and Mac Pro Firewire problem waking from sleep and loud feedback. I had a powermac before this with the speakers and it worked fine. But the mac pro is having these issues. Is it the firewire port or the speakers or (and most likely) just a firmware glitch with mac pro? Anyone else see these issues?

    http://web.mac.com/jerimydulay/Site/MyAlbums/Pages/Lacie_FirewireMIDI.html
    Here is my audio settings. For some reason I wish I could remember what I did. It was actually the Apple Store tech in the Unversity Village in Seattle that gave me the idea and I swear I had to change the settings in MIDI setup. Now that Leopard is out it seems the MIDI stuff has been redone. I included screenshots of my MIDI setup as it is currently to see if you see something different on your computers. Let me know!

Maybe you are looking for

  • Podcast Cover Image & Recent Podcasts Not Appearing

    I know this question has been asked before, but I can't seem to get the Podcast Cover Image to appear on my client's iTunes podcast page both within iTunes and on Apple's iTunes website. When I'm subscribed to it, it does show up. What am I doing wro

  • DVI to S-Video & Composite plug cable needed for output to audio/TV system

    I'm in need of a DVI to S-Video and Composite plug cable to replace the Monster iTV Link cable I used with my 12" Aluminum PowerBook. (http://www.monstercable.com/apple/Computer.asp) I use it to output to my audio/TV system. Whereas the PowerBook use

  • Best practice regarding work flow (cutting, applying effects, exporting etc)

    Hi! I've been asked to shoot and edit a music video for a friend of mine, and I'm trying to figure out the best way to manage this project in PrE (in what order to do things and so on). I have a picture in my head which make sence, but I'd like to ha

  • Blocking the invoice

    hi all, i want to block the invoices for payment ,which are not cleared by quality inspection. in spro is there any settings available for the same. Kindly guide me. Regards, velu

  • Moving about newly imported photos

    Hi there, I have a fairly large iPhoto library spanning over 800 events and 49,000 pictures, all arranged chronologically. I am about to start scanning in a lot of old memorabilia that I will eventually want to put new scanned images into the relevan