Yosemite can't print to wireless Epson XP-310

When I try to print wirelessly, my Macbook goes through the motions of printing. The printer que shows in the dock for a few seconds and then goes away. Nothing prints and nothing in the que. It all worked in Mavericks and worked for a while in Yosemite. Then one day, the Macbook couldn't print. I deleted the printer, installed Yosemite-compatable software from Epson and it won't print. I can however print wirelessly from my Snow Leopard imac. Does anyone have a suggestion?

Hi orionstaff,
If you are having an issue with printing from your MacBook, you may want to use the steps in this article to troubleshoot -
OS X Yosemite: Printing troubleshooting
It sounds as if you have already tried a few of the steps, but there are more that may help you.
Thanks for using Apple Support Communities.
Best,
Brett L 

Similar Messages

  • Can't print to wireless Epson 810 (MACOSX) from Firefox, says on hold

    Have printed wirelessly from earlier versions of Firefox. This problem seems to be confined to new Macbook Pro 2.4 I5. No problem printing from Word, Safari, etc. When given print command it places the print job "on hold." When "on hold" is clicked, the print job deletes

    I have the same setup but with a Canon MX850.  This did not fix my problem. 

  • After the driver update 2.7 released by Apple I can not print on my Epson Stylus Photo RX650. Epson tells me it is apple's fault

    After the driver update 2.7 released by Apple I can not print on my Epson Stylus Photo RX650. Epson tells me it is apple's fault.
    This is the message from Epson:
    The driver update 2.7 was released by Apple. The driver released by Epson is available for download from the Epson Australia web site. It is the Apple update driver download that has caused the problem.

    After the driver update 2.7 released by Apple I can not print on my Epson Stylus Photo RX650. Epson tells me it is apple's fault.
    This is the message from Epson:
    The driver update 2.7 was released by Apple. The driver released by Epson is available for download from the Epson Australia web site. It is the Apple update driver download that has caused the problem.

  • MacBook Air will not print on wireless Epson printer.  It says 'filter failed'

    MacBook Air all of a sudden will not print on wireless Epson printer.  The error message is 'filter failed'.  Shut down everything and rebooted, but still not printing.

    Launch the Console application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad and start typing the name.
    Select
              /var/log ▹ cups ▹ error_log
    from the hierarchical list on the left side of the Console window. If you don't see that list, select
              View ▹ Show Log List
    from the menu bar.
    Each message in the log begins with the date and time when it was entered. Select the messages from the time of the last failed printing attempt. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message (command-V).
    If there are runs of repeated messages, post only one example of each. Don’t post many repetitions of the same message.
    ☞ The log contains a vast amount of information, almost all of it useless for solving any particular problem. When posting a log extract, be selective. A few dozen lines are almost always more than enough.
    Please don't indiscriminately dump thousands of lines from the log into this discussion.
    Please don't post screenshots of log messages—post the text.

  • Running 10.6.8 on mac mini. ethernet port quick. I can not print using wireless

    Can not print using wireless. It printed fine using ethernet
    Running 10.6.8 on mac mini. Ethernet port has quit. (lighting strike I think, it fried two routers, did not get anything else)

    Nothing to go on here.
    Do you have a wifi capable printer? If so, what model? What happens when you try to set it up?

  • Can I print on an Epson printer (xp600) ?

    Can I print on an Epson printer from IPad?

    Yes, since this printer supports Airprint you should be able to print.
    See: http://support.apple.com/kb/ht4356

  • P Help - Laptop can't print via wireless net to 7780 all in one office jet.

    Please help - I can not print from new laptop via wireless network to my existing HP 7780 Office jet Pro all in one printer. I am running windows 7 32-bit operating sys.  HP diagnostics software indicates all is good. Print job gets stuck in queue.

    1. Make sure the printer is turned on and connected to your network. Verify that you can access the printer's internal web page by browsing to its IP address before continuing.
    2. Click >> Start >> Control panel >> Printers.
    3. Click the Add a printer
    4. Select Local printer
    5. Select Create a new port and select Standard TCP/IP Port and click Next button.
    6. Under Device type, select TCP/IP Device. Under Hostname or IP address, enter the printer's IP address. Click Next.
    7. Select Hewlett-Packard from the list of manufacturers and select and select your printer model. Click Next.
    If your printer model was not listed, then select Have Disk, browse the HP CD that came with your printer and select the first file that starts with hp and ends with inf. Click Open then OK. Select your printer model. Click Next.
    8. If you are asked, use the currently installed driver.
    9. It will ask for the Printer name -- enter a new name or use the existing one. This will be the name of the printer that you select from other applications.
    10. You may be asked to share the printer. Choose NO.
    11. The Print Test Page box appears. Go ahead and print it.
    12. Click Finish.
    Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
    I am employed by HP

  • Can't print to new Epson AIO, other apps fine

    New Epson CX4800. All apps print fine to it, except Appleworks. Instead, the print job shows up in the queue and the queue immdiately stops.
    Have repaired permissions. Have deleted the print queue and re-added. Have tried old and new documents. Appleworks simply isn't happy with the printer.
    Checked for new drivers from Epson (only for Intel Macs).
    Epson tech support is stumped.
    Any ideas?

    It looks like the one thing you have done is delete the AppleWorks preferences. This can fix printing problems with AppleWorks. See my user tip, AppleWorks has stopped working correctly, for more info.

  • Can't print on wireless network from desktop

    Can someone please help? I am not able to print from Desktop computor. The printer and wireless connection is fine I can print from another computor. My D-Link USB is working fine as well as I can connect to the internet with no problem. Can anyone please help me to resolve this issue.
    Thanks
    Clarke

    What kind of wireless router do you have?  Is the printer connected wireless to the router?
    What kind of desktop computer do you have?  How is the desktop computer connected to the router?
    Regards / Jim B / Wireless Enthusiasts
    ( While I'm an embedded wireless systems engineer at work, on this forum I do not represent my former employer, Hewlett-Packard, or my current employer, Microsoft )
    + Click the White Kudos star on the left as a way to say "thank you" for helpful posts.

  • Can't print through wireless hookup. Printer says there is a router/access point channel conflict.

    I cannot print. Printer is wirelessly connected to the airport extreme router.
    My printer says that the network connection passes all tests but there is a note: "A router/access point channgel conflict has been detected.
    The Epson Printer utilitie says only "Communication error". I've tried changing channels to no avail.

    I finally figured out how to fix this after a few weeks of being with out my printers.  I tried the reboot of everything and it didn't work.  I went into the airport utility and start poking around.  I tab through all the various setting and everything looked good.  By virtue of tabbing the "update" button was active.  I hit that and the airport extreme router rebooted and bingo the printer works for all my PCs and MACs.  This seem to have started with the last epson update but who knows.  Good luck

  • Can't print since last epson driver update from Software Update

    I have a Epson Workforce 600 connected wirelessly which was working just fine until I installed the driver update yesterday which was provided via Software Update. Now, I can print a test page via the Epson Software and my computer can see the printer but when I hit the "print" button on print dialogs, nothing happens. It's very strange, it seems as if the click isn't even recognized.
    I've tried printing from multiple programs and it's all the same. Only printing a test page from the Epson software works at this point. Any suggestions?

    The probable cause of this is that the /Library/Caches/Epson folder is missing.
    There are several threads here about this issue with Epson printers: try deleting the <hard drive>/Library/Printers/EPSON folder and then reinstalling the software through Software Update or from the Apple download site. After installing the software, restart, delete and re-add the printer. That should recreate the /Library/Caches/Epson folder, and you should be able to print.
    hope this helps.

  • Since I updated to Mountain Lion I can't print to my Epson NX430 from my Mac. Though it prints fine from my iPad. Suggestions? I have already uninstalled and reinstalled software. It won't show up on my list of printer options.

    My printer is showing no errors and printed fine from my iPad, but it will not connect wirelessly to my mac mini.  When I would try to print the printer status would remain at "idle" and the print queue would give an error message saying no printer was connected to the network.  I searched for a driver update and couldn't find one so I decided to uninstall the software and then reinstall.  I have done this and now the printer will not show up on the list where it should be to even install it durint set up.  What can I do to resolve this issue?

    add the printer IP without the HTTP
    "192.168.1.x:"

  • Can I print both wireless and USB to same HP 8625 printer from different computers?

    I Just installed a new HP Officejet Pro 8625 printer which is connected to my desktop computer via a hard wire USB connection.  I also have a separate PC which is used for connecting to my Wi-Fi network.  Can I have the same printer connected to one computer via a hardwire USB connection and enabled to perform wireless printing from another computer?  

    Hello,
    The answer to your question is Yes.
    Click http://www8.hp.com/us/en/m/campaigns/wireless-printing-center/printer-setup-help.html to know how to connect your printer in a wireless network.
    Regards,
    Jabzi
    Give Kudos to say "thanks" by clicking on the "thumps Up icon" .
    Click "Accept as Solution" if it solved your problem, so others can find it.
    Although I am an HP employee, I am speaking for myself and not for HP.

  • Can not print from wireless laptop

    Hello. I have been searching forums for the past 2 days now and have tried many suggestions made but I still cannot print. My environment has a Cisco 3560G switch which does DHCP with a VLAN for wireless clients, connected to this switch is a Cisco WLC4402 to manage all wireless access points which are Cisco 1130 and 1140 series. We recently purchased an HP LaserJet pro CP1525nw color printer which we have connected with an Ethernet cable to the Cisco switch on a port in the same VLAN as the wireless clients. The printer will pick up a valid IP address from the switch and if I connect a laptop with an Ethernet cable to the switch I can ping the IP of the printer and print to it once I install the driver, if I unplug the laptop from the switch and go over the wireless my laptop gets an IP in the same range as the printer and I can ping the printer IP address as well as open the web interface for the printer but cannot print, once I open the print queue on my laptop I see error printing and nothing prints out. I always add the printer as an IP port and supply the IP address when I install the driver to test. I have also gone through the manual for the WLC4402 but did not find anything for printing. There has to be a setting on the controller that is preventing me from printing but I don't know what it could be. On the laptop I use to test I also installed LPR and LPD and I even tried using another printer that I know works fine in its place and still could not print, so I don't think it's the printer. Does anyone know where I can start looking?
    Thanks

    The printer setup on the laptop is using Protocol RAW with port number 9100, cannot set it up as LPR because we do not have a print server setup, we are trying to do printing via IP address. I enabled Multicast as it was the only option I saw available in the WLC4402 (did not see anything for broadcast) and tried printing but have the same results. Anything else I can try?

  • Can't Print Over Wireless Network to HP OfficeJet 6210 connected to XP Comp

    I've been trying in vain for the better part of a week and a half to print from my MacBook Pro (w/ Leopard 10.5.5) over my wireless network (Linksys WRT54G Wireless Router) to an HP OfficeJet 6210 connected to my Dell Desktop running Windows XP SP3. I CAN however, both see and print to the printer with a PC laptop running Windows Vista. I've both re-installed and upgraded the drivers to the Windows XP desktop AND the MacBook Pro for the printer and still can't come to a conclusion. I am able to print to the printer from the MacBook Pro when plugged directly in via USB. I've tried to add the printer via "Windows" tab in printer configuration by choosing the network, then the computer, then entering the administrator accounts user name/password, however I'm still unable to print from the MacBook. Any ideas and suggestions would be greatly appreciated. Thanks!
    Message was edited by: LukeZim

    Hi LukeZim,
    Sorry, but drivers on OS X aren't like on Windows (yet), where a driver is just a component in a system that works for all the comm protocols the computer can do. That's the way it would be if manufacturers provided CUPS drivers (CUPS is the print control system on OSX). But most manufacturers are still providing Carbon drivers - where the comm protocol is limited to what is put into the driver. HP provided a Carbon, USB-only driver for your printer. You'll need to use a third-party CUPS driver to use Windows Printing.
    Gutenprint drivers (included with Leopard) are CUPS drivers, for example.
    http://openprinting.org/showprinter.cgi?recnum=HP-OfficeJet6200
    CUPS drivers:
    http://www.linuxfoundation.org/en/OpenPrinting/macosx

Maybe you are looking for