Yosemite clean install shows that it can partition only in two

HI,
I have searched the forum, but wasn't able to find a suitable answer in my case.
I have done a clean install of yosemite on macbook pro. I wanted to install ubuntu(linux). For which if I want to make partitions it shows like "You can only split the partition in two by click +" . Why can't I make uneven partitions like 250GB for Mac and 100 GB for linux? Am I missing something here?
Thank You!

You can. See:
To resize the drive do the following:
1. Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
After the main menu appears select Disk Utility and click on the Continue button. Select the hard drive's main entry then click on the Partition tab in the DU main window.
2. You should see the graphical sizing window showing the existing partitions. A portion may appear as a blue rectangle representing the used space on a partition.
3. In the lower right corner of the sizing rectangle for each partition is a resizing gadget. Select it with the mouse and move the bottom of the rectangle upwards until you have reduced the existing partition enough to create the desired new volume's size. The space below the resized partition will appear gray. Click on the Apply button and wait until the process has completed.  (Note: You can only make a partition smaller in order to create new free space.)
4. Click on the [+] button below the sizing window to add a new partition in the gray space you freed up. Give the new volume a name, if you wish, then click on the Apply button. Wait until the process has completed.
You should now have a new volume on the drive.
It would be wise to have a backup of your current system as resizing is not necessarily free of risk for data loss.  Your drive must have sufficient contiguous free space for this process to work.

Similar Messages

  • How to Create a Bootable Flash Drive to do a clean install of Lion.  I have tried to use the InstallESD.dmg but it still will not do a clean install so that I do not have to do a reinstall from the Recovery (That just re downloads and takes over 6 hours)?

    How to Create a Bootable Flash Drive to do a clean install of Lion.  I have tried to use the InstallESD.dmg but it still will not do a clean install so that I do not have to do a reinstall from the Recovery (That just re downloads and takes over 6 hours)?
    The system I'm have is a Mac-mini that had SL on it and no SuperDrive.  I have also call Apple Support and they have really have not been to much help over 1st did my up grade to Lion and Installed the Lion Server.... it lost my SSL that I paid for and kill almost on of my server setting, plus kill all my web servers (using apache vhosts), and not to say the LDAP will even let remote users login to your laptops.
    PS: There is no way that I'm going to buy a Install USB from Apple... They have over billed me over $300.00 because the Apps Store still has bugs (Glad I did not write that App/Service)
    If there is anyone that can give in the information to create a USB install stick, I would be very thinkful.

    Here you are bro, courtesy of "softpedia.com"....brilliant site!!!
    If you ever had problems with your Mac OS X installation you know that the first thing you should do is to check the startup volume using Disk Utility.
    After the check has ended and, if the errors exceed a certain level of seriousness, the Disk Utility application will require you to restart your Mac and use its Mac OS X Install disc counterpart.
    Other users may have to reinstall OS X altogether, but will find, or already know, that their SuperDrive (a CD/DVD reader and write combo drive) is not functioning properly and it will not be able to read the Install disc.
    Although this might happen to Mac OS X Leopard users due to faultyhardware, the vast majority of problematic SuperDrives will be encountered inside Snow Leopard running Macs.
    This is due to the updated SuperDrive firmware included in either the Install disc or the software updates one has to install to reach the latest version of OS X, namely 10.6.6.
    This can be fixed by flashing the SuperDrive’s stock firmware using free command line tools that one can find for free online (I will write about this process also, but at a later time because this article only focuses on allowing you to create your own alternative USB boot disc).
    If you are reading this last bit of information with skepticism, than you should know that it happened to me too. Despite all my tries to make it work properly, the SuperDrive kept on munching any inserted DVDs and just popped them out in about twenty seconds.
    The workaround to this issue was to create my own Leopard bootable USB memory stick. I am not suggesting a Snow Leopard bootable stick mainly because there are lots of users that have decided to buy the cheaper, Upgrade version, which I have not tested and, therefore, I’m not sure if it will work properly once written to a USB disk.
    And now, here are the exact steps you should follow in order to obtain a fully bootable Leopard (or Lion) Install disc.
    Step 1 (If you already have the Leopard install disc DMG file you can skip to Step 2)
    Launch Disk Utility (you can find it inside /Applications/Utilities). Here select the Leopard Install disc in the list of drives on the left and click on the New Image menu entry at the top of the window. A save message will appear where you will have to select the Desktop as a destination.
    Step 2
    After Disk Utility has finished creating the Leopard DMG, insert your USB stick and erase all data and reformat the disk. To do this select the USB in the list of drives on the left and, after clicking on the Erase tab on the right side of the window, choose the Mac OS Extended (Journaled) format and click the Erase button beneath.
    Step 3
    After the USB has been reformatted, download the SuperDuper app from HERE and launch it. Once SuperDuper starts, you will only have to select the DMG in the Copy drop-down menu, your USB memory stick on the right and hit the “Copy Now” button.
    One can also use Disk Utility for this task but creating a bootable USB stick failed 2 out 4 times when copying the DMG to the stick (with the exact same settings each time). Creating the bootable stick using SuperDuper proved to be the perfect way to do it because it worked each of the 4 times I tested it.
    The steps above can also be used to create a bootable Mac OS X Lion USB by using the InstallESD.dmg image you can find inside the Lion installer (named “Install Mac OS X Lion.app”) downloaded from the Mac App Store in the /Applications folder.
    To locate the InstallESD.dmg right click the Lion installer, select the “Show Package Contents” entry, go inside the “Contents” folder, and from there into the “SharedSupport” folder. Inside this folder you can find the InstallESD.dmg you can use to create your own bootable Mac OS X Lion USB stick. To do so, go to the third step described above and use the InstallESD.dmg as the DMG to be copied to your USB disc.
    That’s it! Once the process ends you will have a fully bootable Leopard (or Lion) USB disk that you can use as an alternative to the Apple’s DVD Install disc that comes bundled with all Macs.
    To use your newly created bootable disk you will have to restart the Mac, press and hold the OPTION key until the StartupManager appears. Here, select the Mac OS X Install disk using your keyboard arrows and press return to start from the selected drive.

  • ILife Missing After Yosemite Clean Install

    I have just done a clean install of Yosemite on my MacBook Air that was running Mavericks, but all iLife Applications (iPhoto, GarageBand, etc) are missing and the App Store says I have to purchase them.  How do I get iLife back?

    Hi!
    I'm having an almost same problem. I just bought a brand new macbook air and performed the Yosemite clean install, with an USB drive. When I access the AppStore, It tells me that I have to pay for not only iLife apps, but also: Pages, Numbers and Keynote.
    This is not correct, right? This apps should be free with my new macbook... and now I can't go back to Mavericks...
    Can someone help me?
    Thanks a lot.
    Regards,
    Marcia.

  • Games I bought years ago, Texas Holdem and iQuiz will no longer transfer to my iPod Classic. They show in my computer "Apps" but they won't transfer. They no longer show that they can be "Re-Downloaded" from "Previously Purchased" they don't exist there.

    Games I bought years ago, Texas Holdem and iQuiz will no longer transfer to my iPod Classic. They show in my computer "Apps" but they won't transfer. They no longer show that they can be "Re-Downloaded" from "Previously Purchased" they don't exist there.

    Have you seen this article?
    Syncing and troubleshooting iPod games
    B-rock

  • There is no option in my iPhone 5s showing that I can make my fingerprint :/ I have already made my passcode why this is happening :( it's really annoying me!!

    There is no option in my iPhone 5s settings showing that I can make my fingerprint :/ I have already made my passcode why this is happening it's really annoying me!!

    Do a Reset
    http://support.apple.com/kb/HT1430, no data will be lost.
    Check iPhone model
    Settings > General > About > Model?

  • How can i validate a Field so that it can accept only Numbers

    can any one help me to validate a filed so that it accepts only numbers if not alert user (client side JavaScript alert message)
    Iam using JSF and ADF BC as the Technologies in my application ..
    my requirement is to validate a filed so that i can accept only numbers in my jspx page..
    I had used ADF regularExpression Validator do so... but it results in exception
    java.lang.IllegalArgumentException: 'value' is not of type java.lang.String.
         at oracle.adf.view.faces.validator.ValidatorUtils.assertIsString(ValidatorUtils.java:36)
         at oracle.adf.view.faces.validator.RegExpValidator.validate(RegExpValidator.java:103)
         at oracle.adf.view.faces.component.UIXEditableValue.validateValue(UIXEditableValue.java:378)
    <af:validateRegExp pattern="[0-9]*"
    noMatchMessageDetail="Please enter Numbers only"/>
    Using validateRegExp i can only validate a field that accept String type data ..

    Hello experts,
    Am seeing the same problem while trying to validate an inputtext field that can only accept numbers. This input filed is part of a table ..Data expected here is an integer
    since that is what is gotten from my ejb/sent for update to the db.
    <af:inputText value="#{row.daysToReview}"
    required="#{bindings.AdminResultBeanresultBeanArray.attrDefs.days.mandatory}"
    columns="#{bindingsAdminResultBeanresultBeanArray.attrHints.days.displayWidth}"
    binding="#{backing_Admin.inputText2}"
    id="inputText2"
    label="#{res['admin.daysheader']}"
    autoSubmit="true">
    <af:validateRegExp pattern="[0-9]+"
    noMatchMessageDetail="Please enter a number"/>
    <f:convertNumber groupingUsed="false"
    pattern="#{bindings.AdminResultBeanresultBeanArray.formats.days}"/>
    </af:inputText>
    java.lang.IllegalArgumentException: 'value' is not of type java.lang.String.
    at oracle.adf.view.faces.validator.ValidatorUtils.assertIsString(ValidatorUtils.java:36)
    at oracle.adf.view.faces.validator.RegExpValidator.validate(RegExpValidator.java:103)
    at oracle.adf.view.faces.component.UIXEditableValue.validateValue(UIXEditableValue.java:378)
    <af:validateRegExp pattern="[0-9]*"
    noMatchMessageDetail="Please enter Numbers only"/>
    Using validateRegExp i can only validate a field that accept String type data ..
    Thanks in advance.

  • Yosemite Clean Install Problems

    Hi,
    I have recently tried to do a clean install of the Yosemite OS but the install was unsuccessful and I have had nothing but trouble since. If you have any ideas on how to fix my problem, I'd be very grateful. Perhaps you have or have had the same problem and have some other ideas on how to fix it.
    (Note: Recently I have not used TimeMachine as it kept on corrupting my external HD, so I have backed my files up manually on another volume but no previous OS backup to revert to)
    This is what I've done:
    Attempt 1: Bootable USB
    I created a bootable USB of Yosemite (via Terminal etc.). I was able to install Yosemite and it restarted. On restart, it continued to install the other system files, but suddenly stopped as it "could not extract files from BaseSystemBinaries.pkg". I restarted the Mac and it continued to install the other system files, but after a while it came up with a message saying "couldn't attach disk image". Then I tried once again and it came up with some other error message. I went into Disk Utility, erased the disk and the Macintosh HD partition and attempted to re-install Yosemite from the USB after another restart. Despite having erased the disk, the installation went straight back to installing the excess files (I guess once you get to that point, it remembers and you can't get out of it until the process completes). Unfortunately, once again, error messages came up. (Note: USB was formatted for Mac Os X Journalled thingo)
    Attempt 2: Internet
    I removed the USB and it said I could install the extra files from the net. I entered my WIFI code, AppleID password etc and the download started. Unfortunately I do not have 293 hours to wait until the download completes, and after waiting two hours and noticing the download had another 394 hours to go, I decided this was not going to work.
    Attempt 3: Downgrade
    I hunted around in my old CDs and DVDs and found a bootable DVD of Mac OS Lion. It installed completely and I was so over the moon! I Then thought - ah, perhaps I can upgrade from Mac OS Lion to Yosemite. I copied the Yosemite Installer from the USB on to my Mac and started the install. All went well until the computer restarted and proceeded to install the excess files - once again, I had problems as the "BaseSystemBinaries.pkg" couldn't be opened.
    Attempt 4: Confused
    I figured that I would easily be able to downgrade again considering it worked last time. I did exactly the same things - erased the disk in Disk Utility etc, but for some reason, the install failed and each time I tried to restart, the Mac returned to the same place (a bar "installing Mac OS Lion) and failed shortly after.
    Thoughts
    1) How do I get the Mac to forget or erase the previous install attempt so I can attempt another fresh install. It remembers which stage of install the installer is at be it for Yosemite or Lion. It keeps returning to the same stage and fails. Even after erasing the disk and partition, and resetting the PRAM.
    2) Could my Yosemite Installer be corrupt? How on earth could it become corrupt after installing from the internet? What if I had not attempted a clean install, upgraded. I'd be in the same position and if I hadn't backed up, lost absolutely everything...

    SINCE MY FIRST POST,  I follow the same instructions from: http://osxdaily.com/2014/10/18/clean-install-os-x-yosemite/
    I HAVE NOW SUCCESSFULLY INSTALLED YOSEMITE.  Looks good. Everything in place, including all my menubar items. My most used app, Adobe Photoshop CC 2014 works (Amen) and all it's 9 or 10 plug-ins there and work. So I'm feeling a-okay about it right now.
    Topic1. What happen to me;
    Topic 2. What I'd suggest
    Screen Shot 2014-10-23 at 8.49.21 AM.jpg
    TOPIC 1. HERE'S WHAT HAPPEN TO ME (Thus far):  I did NOT use a USB drive for my clean install (as osxdaily mainly suggested).
    I used an external drive I had available (250GB).
    At the last minute I recalled another item I read while browsing: INSTALL YOSEMITE ON AN EXTERNAL DRIVE (rather than just a USB flash drive) . - So that's what I did; installing it on the drive I  had prepared for the clean install. --
    There was a problem came up> The installation seemed to hang up in the way several others have mentioned (a big X and a stalled blue progress bar).
    I turned the computer off after a few hours. (another suggestion I read). Turned it back on.
    Much to my surprise, my computer booted from this external drive and there was Yosemite  -- I'm also able to access my apps and data from my built-in iMac hard drive. Some work. Some important ones give me an error message...so I need to check all that out.
    I didn't plan this, never done it before but I'm pleased. I can get to see and use Yosemite (I like it's look, features, etc. so far), can access and test what apps work and what may give me a problem and, real cool, I can simply go back to booting up from my internal hard drive and all my Mavericks stuff is there.
    TOPIC 2. WHAT I'D SUGGEST (for clean install) -- which I think is a good idea and part of this OP): Follow the osxdaily steps again (they worked for me).  DON'T LATER RESTORE YOUR DATA ET. AL. FROM TIME MACHINE. -- Instead when Yosemite is going through it's first set-up it asks various questions and give you options to select or not - In this initial Yosemite start-up, select the option that indicates it will MIGRATE YOUR DATA FROM ANOTHER MAC OR FROM TIME MACHINE.
    Thus> Don't try to Restore your info and apps from Time Machine later -- SELECT MIGRATING YOUR DATA FROM TIME MACHINE (or Mac or one of those options) during Yosemite's initial first start-up.
    Also, Big Tip, not only do the expected preparations prior to attempted installation (upgrading your OS and major apps to their latest version, running Onyx or Cocktail or something like that, and backing up Everything in some way -- but when installing DISCONNECT all unneeded USB devices and especially USB hubs -- just keeping what you need for your keyboard and mouse; this can prevent a lot of problems, I believe (maybe caused by device drivers?)
    CONCLUSION: If you get that hang up in the way several others have mentioned (a big X and a stalled blue progress bar).Turn off computer after a few hours and turn on again.
    I think this method will work: as mentioned> MIGRATE DATA DURING YOSEMITE'S FIRST RUN. -- After I test out a few more apps I'm going next to install Yosemite on my main, internal iMac hard drive: it's over 600GB of data on it.
    I hope this helps yourself (and others).
    Let us know how it goes. Good luck.
    P.S. -  Yosemite is oh-so clean...a nice 'fresh start' compared to my iMac with a year's worth of this and that all over the place. Contrary to the bad rumors and trolls I think Yosemite is a 'mild' upgrade, meaning it doesn't NOT threaten existing apps and data. -- It's real problems are with the NEW things it introduces, like Handshake and Continuity, Apple Pay, etc. -- Between start and finish it was close to 24 hours.

  • Lion Clean Install - No Disc Required - Recovery Partition Solution

    There is a way to run a Lion clean install without unpacking the installation onto a new disc or thumb drive.  It can be accomplished via a slightly longer, two-step upgrade process, which requires wiping your hard drive after you've upgraded to Lion.  You must be able to connect to the internet for this option to work, as it will require downloading the install package again.
    As always, be sure to back up your data before performing any sort of wipe of your hard drive. 
    STEP 1 - Initial Upgrade
    Perform a normal Lion upgrade through the App Store.  This will install Lion on top of your current configuration.  It will also create a Recovery Partition, which is a new feature of the Lion OS.  It is this Recovery Partition that you will use to perform the clean install.
    STEP 2 - Wipe and Clean Install
    Restart your computer into Recovery mode.  This can be done by either holding down CMD-r during boot up, or holding down the Option key during bootup and selecting to boot from the Recovery partition.
    Select the Disk Utility option from the main menu.  Here you can select the main partition, click on the Erase tab at the top, and completely erase the partition.  Once you've done this, quit Disk Utility Option, and you will return to the main menu.
    Select the Lion Installation option.  It will ask you to connect to the internet if you have not done so already (if wireless, you can do this via the Wi-Fi icon in the top right corner).  It will also ask you to input your Apple ID login and password in order to verify that you've already purchased the software.  The installation will take as long as it requires to download the package again.  Once downloaded and installed, Lion will walk you through initial set up.
    This solution worked for me, but I make no guarantees that it will work for others.

    I've created a boot disk (several actually) following the methods outlined in this guide.
    http://www.eggfreckles.net/tech/burning-a-lion-boot-disc/
    I've also saved the installer dmg in several backup locations so it can be burned again fresh or transfered to bootable USB thumb drives.
    The Lion install disk boots up and operates just like the Recovery Partition (Disk Utiltiy and all) with one giant benefit, you don't have to log into the MacAppStore with all it's complications or require a lenghtly internet download to install Lion.
    So you won't see this annoying screen and have to wait a few hours if the servers are overloaded.
    The boot disk also installs considerably faster. Two giant benefits actually.
    Also  once Lion is installed, Bootcamp can be used to partition the drive, then the Recovery Partiton > Disk Utiltiy used to change the BOOTCAMP partition to HFS+ journaled and then 10.6 can be installed or cloned from a external drive onto the BOOTCAMP partition.
    Dual boot Snow/Lion is possible with a large enough boot drive.

  • Imac G3 had clean install OS 10.1; can't install 9.2; now won't boot at all

    Hello,
    I was given an older imac G3--has 176 mg ram; 6 gb hard drive. Due to its small memory and the fact my daughter just wanted it for games, I decided to only install OS 10.1, instead of OS 9.2.2 and OS 10.1.5 which I have on my G4.
    Then, I found that most of my CD games (no internet access) need Classic to run. So, upon inserting my OS 9.1 disk to install that, I got the message that the firmware needed to be updated; then an error saying I needed installer 4.5.5.
    Two questions:
    1. How do I get around the fact that my firmware needs to be updated but when I boot from a locked disk, I get the error message that firmware updates can't take place due to locked disk.
    2. Now, I can't get it to boot at all into OS X or any disk in the CD drive--I get a screen with a little script that says, "failed to boot, etc., Apple Firmware 3.0 3f built 12/__98
    then (not exact text)
    0 >boot MAC-PARTS: specified partition invalid, etc.
    can't open ide1, etc.
    I hooked it up to my other G3 imac and my G4 via ethernet cable but since there's no system accessible, I can't turn on file sharing/Apple talk, etc.
    Hoping I'm not the only night owl going round and round with these kind of problems. Any help would be much appreciated.
    Valerie in Seattle

    If you don't mind wiping the hard drive, boot from the 10.1 installer disk and install the 9 drivers:
    http://docs.info.apple.com/article.html?artnum=75275
    Then find out what CD came with the Mac by first identifying it:
    http://docs.info.apple.com/article.html?artnum=58669
    And then looking at this article:
    http://docs.info.apple.com/article.html?artnum=25517
    If it came with 9, get the original CD that came with it to install Mac OS 9.
    If it came with Mac OS 8.6 or earlier, get a retail 9 CD which looks like
    Do a clean install using
    http://docs.info.apple.com/article.html?artnum=58176 as a guide once you have the correct 9 disk.
    Then install the firmware update that corresponds to your Mac:
    http://docs.info.apple.com/article.html?artnum=86117
    And then I would not even bother with 10.1.5 anymore and get 10.2. Repairing issues with 10.1.5 is difficult. 10.2 installer disks which work on that machine once the firmware is updated look like

  • Xp pro clean install on sata but can't get it access my old raid hdd setup

    Hi,
    I got the Neo4 nforce4 platinum board and i originally setup 2 300gb maxtor ide hdds to raid which had my old xp pro setup but its seen better days and wasn't legit but i own officially now and decided to do a clean install to the 250gb sata hdd i have. install went well with the exception of loading up the nvraid and storage controller during install which for some odd reason wouldn't copy to the sata hdd but none the less everything runs correctly and after i reenabled the raid, thats where i have a problem.
    now after it was set in the bios and rebooted, windows found it as an unknown device which i then set it to the legacy nvraid setup files and installed fine but the problem is that it shows the raid hdd but gives me no access (nor did it come up with the correct name for the drive that was set but the size given was correct) and looking at computer management, it tells me i need to initize a drive which happens to be one of the 300gb hdds thats part of the raid ??? so from seeing that i know theres something wrong so i'm asking what can i do to correct this and get access to the files I already have on it? i don't want to lose what i got on the raided hdds, just wanna burn off whats needed and then wipe the hdd's.

    Guys, I Finally got it to show up correctly I first did a mistake with changing the primary ide to nvidia's driver in which caused a BSOD lucky enough last known good option worked and going back to device manager, i noticed it mentioned a dual ide under secondary ide which i thought i'd try the nvidia driver on. sure nuff, after a reboot it found the 2 hdd's as raid and installing the drivers for them gave me access like before
    Thanks for the help guys tho theres still one last thing i need to go and change now that i noticed it: the northbridge fan died and i searched around the forum and saw a few ppl recomend but i'm not sure what i can really fit as a replacement due to my Evga 6800u + nvsilencer 5 and didn't see any of the topic mention someone with the same. any suggestions on that?

  • How to transfer Messages history from Mavericks to Yosemite clean install

    I would like to do a clean install of Yosemite on my MacBook, but retain all of my Messages history and attachments from my current Mavericks install. Is this possible? What files do I need to copy from the Mavericks install (before I wipe the HD) and where do I need to put them after I install Yosemite (cleanly)? Anything else I need to do after copying them?
    Thanks!

    I managed to finally get mine to work, but not after a bit of trouble and losing new messages since my time machine back up (about a days worth since my backup replaced my current. I backed up and upgraded last night, and I figured out how to restore messages this morning, so anything in between that I got on my phone was lost. no big deal).
    Much of the below is from other discussions, so I don't want to take credit for it, but wanted to make it easy for you, and there was one small change.
    First make sure you can see hidden files by opening terminal and inputting: defaults write com.apple.finder AppleShowAllFiles YES
    QUIT YOUR MESSAGES APP
    Replace the following files from your backup to your current clean install. Pretty much all the files should be in the same spot, except for one folder that I'll explain further below.
    Same File path
    /users/<name>/Library/Messages-------> /users/<name>/Library/Messages/ this folder should include 4 files:
    chat.db
    chat.db-shm
    chat.db-wal
    the folder "Attachments"
    /users/<name>/Library/Preferences----> /users/<name>/Library/Preferencescopy any file that includes iChat or Messages in the .plist
    Different File pathI am not sure if this matters, but it's something I noticed when I got a message in my clean install before trying to restore my history. In Yosemite, I noticed that that "Attachments" and "Archive" folder are both in /users/<name>/Library/Messages, whereas  in Mavericks, the "Attachments" folder is in that file path, but the "Archive" folder is located in /users/<name>Library/Containers/com.apple.iChat/Data/Library/iMessages/Archive, and within this same folder there is a shortcut to the Attachments folder. (I'm not sure if this matters, but this worked for me). I hope I didn't confuse you there!
    /users/<name>/Library/Containers/com.apple.iChat/Data/Library/Messages/Archive-------> /users/<name>/Library/Messages/
    Restart your computer
    Open Messages and it will rebuild your database.
    Ta da!

  • Choosing different/older backup after Yosemite clean install

    Hey guys!
    How can I choose a different/older backup after having formated and clean installed Yosemite? I can only recover from the latest backup right after the installation of Yosemite. I have a NAS System that makes Time Machine backups every day.

    Hey guys!
    How can I choose a different/older backup after having formated and clean installed Yosemite? I can only recover from the latest backup right after the installation of Yosemite. I have a NAS System that makes Time Machine backups every day.

  • Folders disappeared after Yosemite clean install

    Hi
    After performing a clean install of Yosemite, I have lost my Music and Pictures folders in Finder. I have redownloaded my purchases from iTunes but it seems they do not live in a folder called Music. How do I get the folder(s) back and how do I make sure the downloads are in that folder and not somewhere else? (I have tried Spotlight and searching in Finder ut they don't find the tracks).
    Thanks

    The folder was properly referenced in Preferences.
    I re-downloaded purchased music from iTunes and searched for one of them. I managed to open that in Finder and found the folder is there it just wasn't showing in the navigation pane of Finder. I dragged the folder into the navigation pane and now it sits there. The highest level shown to the right is the iTunes folder that sits above iTunes Media, so I think that is correct. But I'm not sure I should have, or need to, drag it like that. Perhaps there is a better way to make it visible in the navigation pane?

  • Clean install & Mac App Store (Can't reinstall Apps)

    Hello Everyone,
    I just did a clean instal of OS X Lion and after signing into the Mac App Store, it is telling me that programs are already installed (which they are not). If I try to update or anything it tellls me these are associated with another account.
    "To update this application, sign in to the account you used to purchase it."
    How do I get around this?
    Regards,
    CLM

    Just to confirm, you can boot into the Recovery Drive by holding down Command R when restarting.
    When you select to reinstall OS X, what happens?
    Fix for missing MAS
    It's possible #1 will do the trick, but you might need to do the additional steps in Keychain access.
    1.  Delete the files /var/db/crls/crlcache.db and /var/db/crls/ocspcache.db. These can be found using Finder’s Go >; Go To Folder menu (Cmd + Shift + G). This resets the cache of accepted certificates in the system. It doesn’t remove them, it just forces the system to rebuild the caches upon restart.
    2.  Open Keychain Access (/Applications/Utilities/Keychain Access). Select Certificates in the Category picker on the left side. In the search bar, type in the word Class. Look through that list, and find any certificates that have a blue + symbol over their icon. These are the ones you need to modify.
    Select one that has a blue +, and hit Command + I. Click the disclosure triangle beside the “Trust” list to show the list of permissions. Now, what we need to do is to set this certificate to use the system defaults. However, for some reason, when you select it, it doesn’t save. So what you need to do is this. Under “Trust”, where it says “Secure Sockets Layer (SSL)”, change the dropdown menu to say “No Value Specified”. Then, close the window. It will ask for your administrator permissions. Then, open the info pane for that certificate again. Under “Trust” again, now set the dropdown that says “When using this certificate:” to say “Use System Defaults”. You can then close out of the info pane, and enter your password again. Do this for any of the certificates that have a blue + on their icon. There should only be one or two at most.
    (Note: I had to toggle the settings before it would stick)
    Restart your system.

  • Yosemite Clean Install Questions

    Due to poor Yosemite performance on a Mid 2009 MBP.  I am considering doing a clean install.  I have a few questions to answer before I start as I am not an expert
    1.  I use time machine for backup.  If after erasing and reinstalling the program, will restoring from a time machine backup bring any of the "dirty" settings back in to the system?
    2.  All I really care to keep is photos, iTunes music, some miscellaneous documents, iWork, checkbook app with the data, safari bookmarks and passwords.  Is there a better way to back these items up specifically instead of a full backup?  and would this be a better option then above.
    3.  Are the performance gains really worth it?  Can I expect this computer to run like it did when it was brand new or is that out of the question?
    4.  Are there any tips, tricks or common problems I should know before starting?
    Thank you for your help

    Thank you Sir
    See attached
    EtreCheck version: 2.1.8 (121)
    Report generated March 26, 2015 at 9:16:03 PM PDT
    Download EtreCheck from http://etresoft.com/etrecheck
    Click the [Click for support] links for help with non-Apple products.
    Click the [Click for details] links for more information about that line.
    Hardware Information: ℹ️
        MacBook Pro (13-inch, Mid 2009) (Technical Specifications)
        MacBook Pro - model: MacBookPro5,5
        1 2.53 GHz Intel Core 2 Duo CPU: 2-core
        8 GB RAM Upgradeable
            BANK 0/DIMM0
                4 GB DDR3 1067 MHz ok
            BANK 1/DIMM0
                4 GB DDR3 1067 MHz ok
        Bluetooth: Old - Handoff/Airdrop2 not supported
        Wireless:  en1: 802.11 a/b/g/n
        Battery Health: Check Battery - Cycle count 489
    Video Information: ℹ️
        NVIDIA GeForce 9400M - VRAM: 256 MB
            Color LCD 1280 x 800
    System Software: ℹ️
        OS X 10.10.2 (14C1514) - Time since boot: 7 days 4:27:47
    Disk Information: ℹ️
        FUJITSU MJA2250BH FFS G1 disk0 : (250.06 GB)
            EFI (disk0s1) <not mounted> : 210 MB
            Macintosh HD (disk0s2) / : 249.20 GB (141.81 GB free)
            Recovery HD (disk0s3) <not mounted>  [Recovery]: 650 MB
        HL-DT-ST DVDRW  GS23N 
    USB Information: ℹ️
        Apple Internal Memory Card Reader
        Apple Inc. Built-in iSight
        Apple Inc. BRCM2046 Hub
            Apple Inc. Bluetooth USB Host Controller
        Apple Inc. Apple Internal Keyboard / Trackpad
        Apple Computer, Inc. IR Receiver
    Gatekeeper: ℹ️
        Mac App Store and identified developers
    Launch Agents: ℹ️
        [loaded]    com.hp.messagecenter.launcher.plist [Click for support]
    Launch Daemons: ℹ️
        [loaded]    com.adobe.fpsaud.plist [Click for support]
        [loaded]    com.hikvision.iVMS-4200.plist [Click for support]
    User Launch Agents: ℹ️
        [failed]    com.apple.CSConfigDotMacCert-[...]@me.com-SharedServices.Agent.plist
        [loaded]    com.google.keystone.agent.plist [Click for support]
    User Login Items: ℹ️
        None
    Internet Plug-ins: ℹ️
        FlashPlayer-10.6: Version: 17.0.0.134 - SDK 10.6 [Click for support]
        QuickTime Plugin: Version: 7.7.3
        Flash Player: Version: 17.0.0.134 - SDK 10.6 [Click for support]
        Default Browser: Version: 600 - SDK 10.10
        OfficeLiveBrowserPlugin: Version: 12.3.6 [Click for support]
        Google Earth Web Plug-in: Version: 7.1 [Click for support]
        Silverlight: Version: 5.0.61118.0 - SDK 10.6 [Click for support]
        iPhotoPhotocast: Version: 7.0
    3rd Party Preference Panes: ℹ️
        Flash Player  [Click for support]
    Time Machine: ℹ️
        Skip System Files: NO
        Mobile backups: ON
        Auto backup: YES
        Volumes being backed up:
            Macintosh HD: Disk size: 249.20 GB Disk used: 107.39 GB
        Destinations:
            Untitled [Local]
            Total size: 159.70 GB
            Total number of backups: 16
            Oldest backup: 2014-08-14 11:54:32 +0000
            Last backup: 2015-02-24 19:23:21 +0000
            Size of backup disk: Too small
                Backup size 159.70 GB < (Disk used 107.39 GB X 3)
    Top Processes by CPU: ℹ️
             8%    WindowServer
             0%    systemstatsd
             0%    fontd
             0%    AppleSpell
             0%    SystemUIServer
    Top Processes by Memory: ℹ️
        120 MB    Finder
        103 MB    Safari
        103 MB    Dock
        86 MB    Mail
        86 MB    WindowServer
    Virtual Memory Information: ℹ️
        4.33 GB    Free RAM
        2.71 GB    Active RAM
        420 MB    Inactive RAM
        856 MB    Wired RAM
        4.39 GB    Page-ins
        37 KB    Page-outs

Maybe you are looking for

  • How to change the keyboard language by code

    I'm building a user interface for my application, some of the fields are in arabic and others are in English, I want to change the keyboard language according to the fields the cursor in, I tried to send KeyEvent once the cursor entered the text fiel

  • Nokia N8 is dead!

    Hi, My Nokia N8 is suddenly dead. It just doesnt start. Any help is appreciated!!! Thanks, P.

  • Internet Explorer 11 does not print any page

    When i attempt to print any page, on any printer (also pdf printers), with Internet explorer 11, there is no error message, but it don't print anything. The printers queue is empty. If i go to the print preview and then i print the page, i receive th

  • 10g db for Managment Respository Error

    Trying to setup 10 using a 10.1.0.4 db. I've gotten through all the pesky errors and now I'm stuck with one that I cannot figure out. In order to use a 10.1.0.3.0 database for the Management Repository, you must have the [spelled wrong] defaut system

  • Cisco WLC with Bonjor services - MSE 3310 compatibility

    Hi All, We have a Cisco WLC 5508 currently running on code 7.2. We have Cisco MSE 3310 appliance (which is EoS & EoS) and it is running on code 7.2 as well. Now, we want to implement Bonjor Gateway services to support Apple Services such as Apple TV,