Yosemite compatibility with final cut pro ?

Hello,
Could you please tell me how/where I can be updated about Yosemite/Final cut pro compatibility
when it will be released ?
Best regards
Gabriel

Could you please tell me how/where I can be updated about Yosemite/Final cut pro compatibility
when it will be released ?
You may wish to be more specific here regarding your question. Yosemite was, of course, officially released on 16 Oct '14, As to FCP, v6.0.6 still functions (but my Motion v3.0.2 is no longer supported).

Similar Messages

  • Camera's Compatable with Final Cut Pro Studio 2

    So I'm looking at buying a camera and the new final cut pro studio 2. The camera I was looking at getting was the Canon GL2, but Final Cut Studio 2 doesn't list that camera as one that is compatable and they don't really list many that are. I was wondering if the camera they list that work are just recommended ones or if they are the only ones that will work. Also if anyone has any suggestions for a decent camera. I really only want to spend a little over $2000. Thanks
    - Josh -

    Apple has long listed the GL1 but not the GL2 but I have no idea why. I have used the GL2 with FCP versions 1,2.3 and 4 and have Studio 2 on order and expect no problems. Using a camera for capture is pretty hard on it so I use an inexpensive mini-dv deck because I much prefer batch capturing everything and doing THAT with a camera (all the start stop and such) is even worse so I suggest a deck. I don't have Studio Pro 2 yet but I am expecting no problems....

  • Is Mavericks compatible with Final Cut Pro 7 and the rest of Studio 3?

    I still use FCP 7 and limp along, but recent updates of FCP X are encouraging.  Until I'm ready to take the plunge, would someone tell me if there's been any feedback re Mavericks' compatibility with Final Cut Pro 7 and the other software in the Studio 3 Suite - especially Compressor and DVD Studio Pro?  I'd love to dl Mavericks but not if there are compatibility issues.
    Thanks ~

    Going from SL to Lion is not advised. Start clean.
    Install Lion. Run updates. Install FCS. Run updates.
    x

  • I updated to yosemite os and was in the middle of a project with final cut pro 10.  Now it says final cut pro is incompatible.  How can I access my project and/or update final cut?

    I updated to yosemite os and was in the middle of a project with final cut pro 10.  Now it says final cut pro is incompatible.  How can I access my project and/or update final cut?

    There is this offer of a trial version FC Pro X with 30 day runtime:
    http://www.apple.com/final-cut-pro/trial/
    Too bad you didn't have a complete backup that could run the previous OS X
    and then you could resume using an earlier Final Cut Pro (10) or (7) since a
    clone would have been a means toward that position.
    http://www.apple.com/support/finalcutpro/
    http://www.apple.com/support/pro-apps/
    This appears to be another good reason to check out all the reasons why one
    would want or need to upgrade a working OS X version, since these kinds of
    events are known to happen as a direct result.
    Sorry to not have an answer to this, other than try & use the Trial version...
    Or see if someone at Apple sales/support can field your issue w/ an answer.
    Good luck & happy computing!

  • ATY radeon x1900 not compatible with Final Cut Pro X ???

    It looks like my ATY radeon x1900 Graphics card is not compatible with Final Cut Pro X and the new motion and compressor?
    I have a Macpro 2 x 3Ghz quad core Intel Xeon with 16gb RAM
    Any suggestion to which card I should Purchase?

    There are several threads here and abroad that mention the installer will notice and approve the ATI 5770 in older mac pros.
    I just now bought a 5770 from Apple's online store for my 2007 Mac Pro 2,1 so I'd have the compatibility if I ever decided to upgrade -- assuming at some point they'll run out of stock and not make any more.
    Keep in mind the 5770 has 1 dual link DVI and 2 mini display ports so you might need to pick up necessary adapters depending on your monitors.
    Hopefully FCPX will be usable in the near future and an upgrade will be pragmatic.
    (I sure hope they don't pull this stunt with the next Logic upgrade.)
    I may have a 1900XT for sale soon.

  • How can i make a picture from a video file with final cut pro x?

    how can i make a picture from a video file with final cut pro x?

    Go to the "share" menu, select "save current frame"

  • Whats the best blu-ray writer to use with final cut pro x

    Whats the best blu-ray writer to use with final cut pro x

    The Sea Tech Blu Ray Writer works great with my Mac.

  • Creating 1080p Blu-Ray with Final Cut Pro 10.0.7?

    The latest version of Final Cut Pro (Vers 10.0.7) seems to share to Blu-Ray disk only at 720p resolution (1280X720) - not 1080P (1920X1200).  I know you can always use Compressor to create a 1080p Blu-Ray, but is there any way to create a 1080p Blu-Ray disk directly with Final Cut Pro?  It seems to me I was able to do this with earlier versions of Final Cut Pro X.

    If you do a 1080 project @24fps or 29.97fps, FCPX will output 1080 frame size using the Blu-Ray settings. If you use Share >BD for either 720 or 1080 @ 60fps, it will choose the 720 resolution.
    I have no idea whether this was always the case.
    Russ

  • How to replace audio on a music video with final cut pro x

    How do I replace low quality audio on a music video to a higher better quality audio with final cut pro x?
    I have the new audio on cd which I can rip and replace the original audio.
    Some audio and music videos are not of same length, In cases like this how do I sync video to the newly replaced audio?
    Is there any tutorial, link or where to look for this in the manual?
    Any help will be very much appreciated.
    Thank you in advance.

    Providing you don't need the video synced or cut to a beat, all you need to do is place your music in the primary storyline
    Connect your video above.
    While your video is connected, hit CMD+R on your keyboard and stretch the video to the length of the music
    If you were to cut the video to a beat, simply add markers on your music track, then connect and trim clips to your markers.

  • Is the Canon Legria HF M56 compatible with Final Cut Pro X

    I am new to Mac and new to Final Cut Pro X. I am looking to buy a new HD Video Camcorder to use with my new computer/software and wondered whether or not the Canon Legria HF M56 is compatible with Final Cut Pro X.
    If it is, do you have to import the footage directly from the Camcorder, or can you first save the files to the Mac and import them that way?
    I currently use a Sony HandyCam HDR-SR10 which produces AVCHD .mts files. I have these saved on my Mac after transferring them over from my PC but Final Cut Pro X cannot import them. Very frustrating for a professional app to be unable to import these files. Even Cyberlink Power Director can use these files.
    Thanks for your help
    ConvertedAppleFan

    It's not on the tested list but it may well work.
    http://help.apple.com/finalcutpro/cameras/en/index.html
    Why don't you download the trial and try it?

  • Your experince with final cut pro vs adobe premiere?

    I am just wondering about your experience with final cut pro and adobe premiere and which you like better and why. Thank you.

    dorian86 wrote:
    I am just wondering about your experience with final cut pro and adobe premiere and which you like better and why.
    I've posted this in other threads here: I've tried the Final Cut Pro X 30 day trial on my old Mac Pro 5,1 (heavily modified) and my new Mac Pro 6,1 (8-core, D700s).  I have a specific benchmark that I run on an NLE when I'm testing it: how long does it take to export one of my movies to a 720p h.264 MP4?
    If we assume the length of the movie is represented by 't' (for time) -
    The old Mac Pro and Final Cut Pro X 10.0: 2t
    The new Mac Pro and new Final Cut Pro X 10.1: 1/2t + epsilon
    The old Mac Pro and Premiere Pro CC: 1/2t + epsilon
    The new Mac Pro and Premiere Pro CC: 1/2t - epsilon
    The newer version of Final Cut Pro X is substantially faster at exporting my movie than the older version.  But Premiere is still faster than it is.  Also, Apple still can't get the whole "edit the source footage raw" bit right; my source footage is all spanned-clip AVCHD, with files that are over 4G a piece.  FCPX can't just open those raw, it insists on putting a MOV wrapper around the footage.  There's no transcoding happening, but the file I/O for those massive files slows the whole process down significantly.
    Because I don't have years of experience editing with NLEs, I'm not married to any particular UI.  FCPX's UI is ... strange, but I didn't find it too difficult to become used to it.  If it were faster and more efficient for what I do, I'd reconsider it.  But for now, it's all Premiere.

  • Burning a DVD with Final Cut Pro 10 stops at 95%, why ?

    Burning a DVD with Final Cut Pro X stops at 95%, why ?

    Stops completely? Mine stopped at 95% for quite a few minutes then finished.  This is usually the time in the process where the lead out is being burned and it will not show progress for some time.  If it is taking more than 10 to 15 minutes from that point you may have another problem.
    stephen

  • Importing issues with Final Cut Pro X. Green flash and twitches while play back

    Hello, I'm having some importing issues with Final Cut Pro X and I can't find any solution whatsoever. Perhaps my importing settings are wrong?
    Anyways, I've done a lot of recordings on eye TV and HD PVR with some videos that are about 3 hours long. I exported them into H.264 files, which turns them into mpeg-4 files with AAC audio. Then I import them into final cut pro X and I notice it takes a long time for them to render the videos and I notice that there are some green screens and twitches while I play through the video.
    Here is a screenshot of the green screen that I'm talking about:
    [URL=http://imageshack.us/photo/my-images/688/screenshot20130409at338.png/][IMG]http://img688.imageshack.us/img688/4537/screenshot20130409at338.png[/IMG][/URL]
    Could it be my 2 video graphics card that is causing this kind of issues? Or is there any solution to fix this?
    In the past, I've used iMovie 09 and it worked out perfectly. However, the new iMovie 11 is terrible because it automatically optimzie my 3 hour long videos into making the importing process to (144 hours long to import). Is there any way to get iMovie 09 back or am I stuck on dealing with this Final Cut Pro X issues?
    More information:
    My Hauppauge HD PVR settings are set to custom. Video Constant Bit Rate, the average bit rate: 13.5 Mbps. The audio is AAC.
    My project settings for video properties is set to custom, 720P HD Format, 1280 x 720 Resolution and 30P Rate. The audio and render properties is set to custom, audio channels is stereo, audio sample rate is 48kHz and the Render Format is Apple ProRes 422.
    I export the video as a quicktime movie. The export setting is H.262.
    The summary of the export is:
    File type: Quicktime movie
    Estimated size: 397GB
    H.264, Width and height: 1280 x 720. Framte rate: 30 fps

    My Hauppauge HD PVR settings are set to custom. Video Constant Bit Rate, the average bit rate: 13.5 Mbps. The audio is AAC.
    My project settings for video properties is set to custom, 720P HD Format, 1280 x 720 Resolution and 30P Rate. The audio and render properties is set to custom, audio channels is stereo, audio sample rate is 48kHz and the Render Format is Apple ProRes 422.
    I export the video as a quicktime movie. The export setting is H.262.
    The summary of the export is:
    File type: Quicktime movie
    Estimated size: 397GB
    H.264, Width and height: 1280 x 720. Framte rate: 30 fps

  • I have a Benq M22 HD cam. Is it compatible with Final Cut pro 7?

    I have a Benq M22 HD cam. Is it compatible with Final Cut pro 7?

    Hi Nick, thanks for your help, Im rather new at editing and FCP. I did everything as it said to do in the MPEG Streamclip download tutorial, but when it finished, I tried to open the .mov files and it was just sound but no picture, just black.
    Now, another thing, the .mov converted files where saved into mi SD card after the program was done (is that ok, or should they have been saved somewhere else too?)  then i tried to put them into my FCP by using the Log and Transfer and when I selected that it gave me this message: "100MEDIA" contains unsupported media or has an invalid directory structure. Please choose a folder whose directory structure matches supported media.
    Help please!! I know that these problems are probably from my lack of knowledge on the program and the whole thing.. but im working on it!!
    Thanks!!

  • Can you burn multible movies on one bluray dvd disc with final cut pro

    how to burn two completed quick time movies to blu ray dvd with final cut pro? Ive tried but wont play

    Mark,
    Welcome to the wild and wacky world of DVD's and Mpeg2!
    Here are a few things that might help.
    it seems to want everything as a QT. This presents size limitations.
    Not really, iDVD simply takes the QT files that you feed it and uses its own compressor to encode them to mpeg2 files. As long as your source material is not over 2 hours iDVD can handle it.
    I'm planning to export from fcp using Compressor in the hope of fitting everything onto one disc
    You can do this, but you might find it simpler to simply export a QT reference movie from FCP and drag that into DVDSP. DVDSP will then use compressor to create the mpeg2 files that you need. I say this because some find compressor a little intimidating at first. (I know that I still do.)
    Now, go find the manuals that came with your software and start reading, DVDSP is a powerful program and the manuals are the best place to start.
    Good luck!
    K

Maybe you are looking for

  • How do i convert my exsisting itunes library to apple lossless?

    Also whrn i do this will i have duplicate files(original/lossless)? If so what is the best way for me to delete them form my macbook? Thanks

  • T60 - external monitor

    I just installed a new 19 inch external monitor for my notebook T60.  I would like to use the new monitor exclusively and close my notebook, while I am working.  when I close my notebook, the new monitor goes into standby mode. what settings do I nee

  • For module pool

    Hiiiiiiiii friends i wanna discuss that i had created a module pool with tabstrip and calling 7 subscreens in that i had save button for that lets suppose 0001 is main screen 0002,0003,00034,0005,0006,0007,0008,0009 are subscreens that r called in mo

  • Changing the Title Icon of JDialog

    Hello All, Is there any way to change the coffer cup icon which appears in the top of a JDialog? In JFrame,we can use setIconImage().But that doesn't work here. Could anyone give me a solution for my problem.? Thanks in Advance, Regards, Vijayakannan

  • Object Level Security (OLS)

    Hi, how could I enable OLS? I tried to follow the manual but I could not enable it. Thanks