Yosemite crashes on gray screen after I enter my password

I’m having serious problems with my MacBook Pro (15-inch, Early 2011) since I upgraded to Yosemite. However I am not entirely sure that it is because of Yosemite. Here is a description of what happens:
I turn on my Mac
The Apple logo briefly appears and then the two user account avatars are shown (me and Guest)
I click on my user account and it takes me to a new screen where I enter my password
I enter my password and there is now a progress bar (which is as slow as mass) underneath my user avatar
Once the progress bar is finished loading I’m taken to a blank gray screen
Nothing happens only I look at this gray screen for ages and eventually my Mac just shuts itself down and restarts
I cannot boot in Safe Mode
I cannot boot in Recovery Mode
I did manage to reset the PRAM but I was still getting the same behaviour that I described above
I also recently had the mother board changed by some Apple “Genius” as I was having problems with the computer shutting itself down while using it, screen freezing and weird graphics behaviour but this seems to be fixed now. I also ran an Apple Hardware Test and it returned no problems.
My Mac starts up every now and then (I’m actually writing this post on my Mac now) but the majority of the time I have the same problem time and time again. Does anybody have similar problems.
Can somebody please help me before I totally go off Apple products.
Thanks :-)

I looked in my system.log and I found the following info that may give a clue as to why this is happening to my Mac:
Nov 6 15:07:09 localhost kernel[0]: Failed to load kext com.apple.kec.Libm (error 0xdc008012).
Nov 6 15:07:18 My-MacBook-Pro kernel[0]: Failed to load kext com.apple.driver.SMCMotionSensor (error 0xdc008012).
Nov 6 15:07:18 My-MacBook-Pro kernel[0]: Failed to load kext com.apple.driver.AppleThunderboltEDMSink (error 0xdc008012).
Nov 6 15:07:18 My-MacBook-Pro kernel[0]: Failed to load kext com.apple.driver.AppleHV (error 0xdc008012).
Nov 6 15:07:18 My-MacBook-Pro kernel[0]: Failed to load kext com.apple.driver.AppleHWAccess (error 0xdc008012).
Nov 6 15:07:18 My-MacBook-Pro kernel[0]: Failed to load kext com.apple.driver.AppleSMCLMU (error 0xdc008012).
Nov 6 15:07:18 My-MacBook-Pro kernel[0]: Failed to load kext com.apple.driver.AppleHDAController (error 0xdc008012).
Nov 6 15:07:18 My-MacBook-Pro kernel[0]: Failed to load kext com.apple.driver.AppleSMCPDRC (error 0xdc008012).
Nov 6 15:07:18 My-MacBook-Pro kernel[0]: Failed to load kext com.apple.driver.AppleThunderboltIP (error 0xdc008012).
Nov 6 15:07:18 My-MacBook-Pro kernel[0]: Failed to load kext com.apple.iokit.IOBluetoothUSBDFU (error 0xdc008012).
Nov 6 15:07:18 My-MacBook-Pro kernel[0]: Failed to load kext com.apple.iokit.IOFireWireIP (error 0xdc008012).
Nov 6 15:07:18 My-MacBook-Pro kernel[0]: Failed to load kext com.apple.driver.AppleIntelHD3000Graphics (error 0xdc008012).
Nov 6 15:07:18 My-MacBook-Pro kernel[0]: Failed to load kext com.apple.driver.AppleMikeyDriver (error 0xdc008012).
Nov 6 15:07:18 My-MacBook-Pro kernel[0]: Failed to load kext com.apple.AMDRadeonX3000 (error 0xdc008012).
Nov 6 15:07:18 My-MacBook-Pro kernel[0]: Failed to load kext com.apple.iokit.IOUserEthernet (error 0xdc008012).
Nov 6 15:07:18 My-MacBook-Pro kernel[0]: Failed to load kext com.apple.driver.AppleUpstreamUserClient (error 0xdc008012).
Nov 6 15:07:18 My-MacBook-Pro kernel[0]: Failed to load kext com.apple.driver.AppleOSXWatchdog (error 0xdc008012).

Similar Messages

Gray screen after loading Yosemite

Hi. Have problem with Yosemite after 10.10.2 update from appstore. My MacBook restart and on 30-50% l see gray screen and no more, it's freeze after login or before. I can't go to recovery mode, can't install/ reinstall Yosemite.
On cmd+r - didn't see anything, just load
on shift - the same
on alt+cmd+r+p - restart and again great freeze screen
on alt - I see my hdd and ssd, if I input usb with Yosemite , I see this usb, no more.
On click on usb with Yosemite I see loading and gray screen after all of this..
If I inset second monitor, on MacBook freeze I see vertical lines. Red-green-blue-white vertical lines on all monitor
Please help me. I need work...

Install Mavericks, Lion/Mountain Lion Using Internet Recovery
Be sure you backup your files to an external drive or second internal drive because the following procedure will remove everything from the hard drive.
Boot to the Internet Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND-OPTION- R keys until a globe appears on the screen. Wait patiently - 15-20 minutes - until the Recovery main menu appears.
Partition and Format the hard drive:
Select Disk Utility from the main menu and click on the Continue button.
After DU loads select your newly installed hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Click on the Partition tab in the DU main window.
Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Click on the Options button, set the partition scheme to GUID then click on the OK button. Set the format type to Mac OS Extended (Journaled.) Click on the Partition button and wait until the process has completed. Quit DU and return to the main menu.
Reinstall Lion/Mountain Lion. Mavericks: Select Reinstall Lion/Mountain Lion, Mavericks and click on the Install button. Be sure to select the correct drive to use if you have more than one.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.
This should restore the version of OS X originally pre-installed on the computer.

My imac will not load after I enter my password. The only thing I get is the arrow from my mouse on top of a blank white screen. Can anyone tell me what this is? I've restarted and turned off several times. I left it on in this state for 8 hours and

My imac will not load after I enter my password. The only thing I get is the arrow from my mouse on top of a blank white screen. Can anyone tell me what this is? I've restarted and turned off several times. I left it on in this state for 8 hours hoping it would reload and work. No luck.

Hello KCC4ME,
You may try booting your Mac in Safe Boot, as it can resolve many issues that may prevent a successful login.
OS X: What is Safe Boot, Safe Mode?
http://support.apple.com/kb/HT1564
If a Safe Boot allows you to successfully log in, you may have issues with one or more login itmes (while the following article is labelled as a Mavericks article, it is viable for earlier versions of the Mac OS, as well).
OS X Mavericks: If you think you have incompatible login items
http://support.apple.com/kb/PH14201
Cheers,
Allen

After i enter my password for the wifi in internet recovery mode it just shows a blank screen no disk utility shows why??? NEED HELP

After i enter my password for the wifi in internet recovery mode it just shows a blank screen no disk utility shows why??? NEED HELP

Enter your admin passwrod, not Wi-Fi network password.

Gray screen after login - Cinnamon 2.2/Nvidia 334

I did a -Syu, saw the new Cinnamon. I then proceeded to snapshot my btrfs root vol, and went ahead with the upgrade. Rebooted, no desktop, just a gray screen with the pointer. I then booted off my install media, and mv'ed my snapshot back to replace my /
Unfortunately, that still somehow didn't fix it, which makes me think a conf is borked in my home dir (not in the snapshot). Nothing in the system journal.
Any ideas?

So, I added the following to pacman.conf -
IgnorePkg = cinnamon* muffin* nemo*
and this is the list of packages I allowed to upgrade -
:: Synchronizing package databases...
core is up to date
extra is up to date
community is up to date
multilib is up to date
infinality-bundle is up to date
infinality-bundle-multilib is up to date
Foreign packages: / 29 / 29
==> Package upgrade only (new release):
core/libsystemd 212-2 2 -> 3
core/systemd 212-2 2 -> 3
core/logrotate 3.8.7-1 1 -> 3
core/mlocate 0.26-1 1 -> 3
core/shadow 4.1.5.1-7 7 -> 9
core/systemd-sysvcompat 212-2 2 -> 3
extra/mesa 10.1.0-4 4 -> 5
extra/pango 1.36.3-1 1 -> 2
extra/clutter-gst 2.0.10-1 1 -> 2
extra/gthumb 3.2.7-1 1 -> 2
extra/libreoffice-en-US 4.2.3-1 1 -> 2
extra/libreoffice-common 4.2.3-1 1 -> 2
extra/libreoffice-base 4.2.3-1 1 -> 2
extra/libreoffice-calc 4.2.3-1 1 -> 2
extra/libreoffice-draw 4.2.3-1 1 -> 2
extra/libreoffice-gnome 4.2.3-1 1 -> 2
extra/libreoffice-impress 4.2.3-1 1 -> 2
extra/libreoffice-math 4.2.3-1 1 -> 2
extra/libreoffice-writer 4.2.3-1 1 -> 2
extra/pkgstats 2.3-3 3 -> 5
extra/polkit 0.112-1 1 -> 2
==> Software upgrade (new version) :
core/glib2 2.38.2-1 -> 2.40.0-1
core/device-mapper 2.02.105-2 -> 2.02.106-1
core/iproute2 3.12.0-1 -> 3.14.0-1
core/linux 3.14-4 -> 3.14.1-1
core/lvm2 2.02.105-2 -> 2.02.106-1
core/man-db 2.6.6-1 -> 2.6.7.1-1
extra/at-spi2-core 2.10.2-1 -> 2.12.0-1
extra/atk 2.10.0-1 -> 2.12.0-1
extra/at-spi2-atk 2.10.2-1 -> 2.12.0-1
extra/gobject-introspection 1.38.0-1 -> 1.40.0-1
extra/gdk-pixbuf2 2.30.6-1 -> 2.30.7-1
extra/cogl 1.16.2-1 -> 1.18.0-1
extra/json-glib 0.16.2-1 -> 1.0.0-1
extra/clutter 1.16.4-3 -> 1.18.0-1
extra/gtk-update-icon-cache 2.24.22-1 -> 2.24.23-1
extra/libcups 1.7.1-4 -> 1.7.2-1
extra/gtk3 3.10.7-1 -> 3.12.1-1
extra/clutter-gtk 1.4.4-4 -> 1.5.2-1
extra/cups 1.7.1-4 -> 1.7.2-1
extra/dconf 0.18.0-1 -> 0.20.0-1
extra/gnome-icon-theme-symbolic 3.10.1-1 -> 3.12.0-1
extra/gnome-icon-theme 3.10.0-1 -> 3.12.0-1
extra/libsecret 0.16-2 -> 0.18-1
extra/gsettings-desktop-schemas 3.10.1-1 -> 3.12.0-1
extra/evince 3.10.3-1 -> 3.12.1-1
extra/file-roller 3.10.2.1-1 -> 3.12.1-1
extra/fontsproto 2.1.2-1 -> 2.1.3-1
extra/gcr 3.10.1-3 -> 3.12.0-1
extra/gtksourceview3 3.10.2-1 -> 3.12.1-1
extra/libpeas 1.9.0-2 -> 1.10.0-1
extra/pygobject-devel 3.10.2-2 -> 3.12.0-1
extra/python-gobject 3.10.2-2 -> 3.12.0-1
extra/gedit 3.10.4-2 -> 3.12.1-1
extra/gnutls 3.2.13-1 -> 3.3.0-1
extra/glib-networking 2.38.2-1 -> 2.40.1-1
extra/gnome-common 3.10.0-1 -> 3.12.0-1
extra/gnome-keyring 3.10.1-2 -> 3.12.0-1
extra/gnome-screenshot 3.10.1-1 -> 3.12.0-1
extra/gnome-themes-standard 3.10.0-1 -> 3.12.0-1
extra/libsoup 2.44.2-1 -> 2.46.0-1
extra/xorg-server-common 1.15.0-5 -> 1.15.1-1
extra/xorg-server 1.15.0-5 -> 1.15.1-1
extra/nvidia-utils 334.21-7 -> 337.12-1
extra/nvidia-libgl 334.21-7 -> 337.12-1
extra/webkitgtk 2.2.5-2 -> 2.4.0-1
extra/gtk2 2.24.22-1 -> 2.24.23-1
extra/gucharmap 3.10.1-1 -> 3.12.0-1
extra/gvfs 1.18.3-3 -> 1.20.1-2
extra/libplist 1.10-1 -> 1.11-1
extra/libimobiledevice 1.1.5-2 -> 1.1.6-1
extra/gvfs-afc 1.18.3-3 -> 1.20.1-2
extra/gvfs-mtp 1.18.3-3 -> 1.20.1-2
extra/gvfs-smb 1.18.3-3 -> 1.20.1-2
extra/lcms2 2.5-2 -> 2.6-1
extra/imagemagick 6.8.8.9-1 -> 6.8.9.0-1
extra/js 17.0.0-1 -> 24.2.0-1
extra/libgee 0.12.0-1 -> 0.14.0-1
extra/libgnome-keyring 3.10.1-2 -> 3.12.0-1
extra/libtracker-sparql 0.16.4-1 -> 1.0.0-2
extra/nvidia 334.21-4 -> 337.12-1
extra/python2-gobject 3.10.2-2 -> 3.12.0-1
extra/python2-atspi 2.10.0-2 -> 2.12.0-1
extra/upower 0.9.23-2 -> 0.99.0-2
extra/usbmuxd 1.0.8-2 -> 1.0.9-1
extra/vte-common 0.34.9-1 -> 0.36.0-1
extra/vte3 0.34.9-1 -> 0.36.0-1
extra/webkitgtk2 2.2.5-2 -> 2.4.0-1
extra/xproto 7.0.25-1 -> 7.0.26-1
community/cjs 2.0.0-1 -> 2.2.0-1
community/python2-pillow 2.3.1-2 -> 2.4.0-1
multilib/lib32-pcre 8.34-1 -> 8.35-1
multilib/lib32-glib2 2.38.2-1 -> 2.40.0-1
multilib/lib32-nvidia-utils 334.21-5 -> 337.12-1
multilib/lib32-nvidia-libgl 334.21-5 -> 337.12-1
aur/jdk7 7.51-2 -> 7.55-1
==> New package :
extra/libinput 0.1.0-1 (required by clutter)
extra/libusbmuxd 1.0.9-1 (required by libimobiledevice)
extra/js17 17.0.0-1 (required by polkit)
and I still had the same issue with the gray screen after login.
Last edited by madscience (2014-04-16 15:02:33)

My daughters ipod keeps coming up disabled after i enter her password.

my daughters ipod touch keeps coming up disabled after i enter her password. How do i reset?

Disabled
Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
iOS: Wrong passcode results in red disabled screen
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
For how to restore:
iTunes: Restoring iOS software
To restore from backup see:
iOS: How to back up
If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
You can redownload most iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store

I'm trying to connect to my home wifi with my imac gh5. After I enter the password it says connection timeout or password incorrect. I know there's no issue with the connection but I don't know what else to do. Does anyone know how to fix this problem?

I'm trying to connect to my home wifi with my imac gh5. After I enter the password it says connection timeout or password incorrect. I know there's no issue with the connection but I don't know what else to do. Does anyone know how to fix this problem?

What is the make & model of your home Wi-Fi router that you are attempting to connect your G5 iMac to? Which exact model of iMac do you have?
What wireless security type is your router using: WEP, WPA, or WPA2? If you temporarily disable wireless security, can the iMac connect to it now?

Hi im trying to make an in-app purchase but after i enter my password it says it cant complete the purchase. Any help?

Hi im trying to make an in-app purchase but after i enter my password it says it cant complete the purchase. Any help?

Just make sure if it wifi is connected. if this doesn't work reboot your iPhone. If it's still doesn't work contact the game service center or something. lastly, make sure u have your credit card sign in. hope this help.

HT5312 after I entered the password of my iCloud ID, it prompted out asking me to check email from an emai address that I did not set for rescure and then I cannot login? now my iPhone has got all the cotacts lost.

after I entered the password of my iCloud ID, it prompted out asking me to check email from an emai address that I did not set for rescure? and then I cannot login.

Try going to https//appleid.apple.com, click Manage my Apple ID and sign in with your current iCloud ID. Tap edit next to the primary email account, tap Edit, change it back to your old email address and save the change. Then edit the name of the account to change it back to your old email address. You can now use your current password to turn off Find My iPhone on your device, even though it prompts you for the password for your old account ID. Then go to Settings>iCloud, tap Delete Account and choose Delete from My iDevice when prompted (your iCloud data will still be in iCloud). Next, go back to https//appleid.apple.com and change your primary email address and iCloud ID name back to the way it was. Now you can go to Settings>iCloud and sign in with your current iCloud ID and password.

Gray Screen after Yosemite update on MacBook Pro

I have a Macbook Pro from the fall of 2011 and receny updated from Mavericks to Yosemite. The installation seemed to go okay, took like eight hours, but started at first. Then once I opened an application it shut down and tried to restart. It went to a gray screen and then to a gray screen with a restricted symbol, or whatever you want to call it, as pictured below.
Before the update, the computer would shut down for no reason and restart with the message, "Restarted due to problem", or something like that. I had repaired and cleaned the disk using Onyx, and it seemed to have stopped the problem, but the way it shut down this time seemes just like that. Now I cannot get it past this screen... Please help, guys :/

Install Mavericks, Lion/Mountain Lion Using Internet Recovery
Be sure you backup your files to an external drive or second internal drive because the following procedure will remove everything from the hard drive.
Boot to the Internet Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND-OPTION- R keys until a globe appears on the screen. Wait patiently - 15-20 minutes - until the Recovery main menu appears.
Partition and Format the hard drive:
Select Disk Utility from the main menu and click on the Continue button.
After DU loads select your newly installed hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Click on the Partition tab in the DU main window.
Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Click on the Options button, set the partition scheme to GUID then click on the OK button. Set the format type to Mac OS Extended (Journaled.) Click on the Partition button and wait until the process has completed. Quit DU and return to the main menu.
Reinstall Lion/Mountain Lion. Mavericks: Select Reinstall Lion/Mountain Lion, Mavericks and click on the Install button. Be sure to select the correct drive to use if you have more than one.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.
This should restore the version of OS X originally pre-installed on the computer.

Two crashes: one OS crash with gray screen and loading bar- help? (Stuck overseas, so you guys are it!)

Hey everyone.
When firefox crashed last night, I figured it was just firefox being difficult, but when while using firefox my entire computer crashed this afternoon and rebooted with a gray screen, the spinny wait symbol, and a loading bar, I started to get concerned. After looking through console, I'm not sure what's caused it to crash like this so I'm hoping one of you bright people here can tell me what exactly happened. I'm running a mac book pro with 10.6.8, have no real addons on firefox aside from adblock plus, divx, memory restart, a french dictionary, and a skin I've been using forever and have also spoken to the developer in the past about. I'm also using Firefox 17.0.1. After trying to google some of the more unfamiliar/suspicious lines (mostly relating to launch agents), I typed into terminal the command to list all launch agents and received 3 replies naming adobe, divx, and google. I used terminal to delete them all just for safe measure (plus the adobe update window has been irritating me to no end so maybe it'll go away now, haha). I did three things when I tried to boot up again after the crash and the weird launch screen with loading bar came up: 1) I held down the power button again because a) the screen was weirding me out and b) I thought it got hung up again (bar seemed to stall for an unusually long time), 2) I tried to boot again and when the same gray screen came back I just figured I had no choice and had to sit through it. 3) when the bar was at about half way I pulled out my ethernet cord for safe measure in case something shady was going on. These three things are also reflected in the log below.
I currently live overseas and the nearest Apple store is over two hours away with no guarantee of a native english speaker working, so if anyone can let me know what caused the crash and if there's anything I can do about it, I would be extremely grateful. The following is my current console log in its entirety from today, including my attempted system update to see if that would improve things (which also resulted in a gray screen with loading bar later), and a really weird bit at the end that is also confusing (but possibly caused by me tinkering in terminal- not sure).
NAME is replacing my HD name, and my screen name here (caithris) has replaced my computer user name. NUMBER has replaced anything that looks like a serial number of some kind.
Thanks so much ahead of time-- please let me know if there's anything else I can share.
Mar 31 00:30:01 NAME newsyslog[9228]: logfile turned over
Mar 31 01:03:25 NAME firefox[8993]: Mozilla has caught an Obj-C exception [NSRangeException: *** -[NSCFArray objectAtIndex:]: index (1) beyond bounds (1)]
Mar 31 01:03:25 NAME [0x0-0x10010].org.mozilla.firefox[0]: 2013-03-31 01:03:25.193 firefox[8993:903] Mozilla has caught an Obj-C exception [NSRangeException: *** -[NSCFArray objectAtIndex:]: index (1) beyond bounds (1)]
Mar 31 01:04:06 NAME [0x0-0x10010].org.mozilla.firefox[0]: pure virtual method called
Mar 31 01:04:06 NAME [0x0-0x10010].org.mozilla.firefox[0]: terminate called without an active exception
Mar 31 01:04:20 NAME ReportCrash[9260]: Saved crash report for firefox[8993] version 17.0.1 (1712.11.28) to /Users/Caithris/Library/Logs/DiagnosticReports/firefox_2013-03-31-010420_NAME.c rash
Mar 31 01:05:35 NAME SubmitDiagInfo[9280]: Submitted crash report: /Users/Caithris/Library/Logs/DiagnosticReports/firefox_2013-03-31-010420_NAME.c rash
Mar 31 03:00:27 NAME loginwindow[31]: loginwindow SleepWakeCallback WILL sleep
Mar 31 03:00:28 NAME configd[13]: PMConnection IPConfiguration com.apple.powermanagement.applicationresponse.slowresponse 1120 ms
Mar 31 11:22:53 NAME configd[13]: Sleep: Success - AC 97 - Idle Sleep
Mar 31 11:22:53 NAME configd[13]: Wake: Success - AC 97 - OHC2
Mar 31 11:22:53 NAME configd[13]: Hibernate Statistics
Mar 31 11:22:53 NAME loginwindow[31]: loginwindow SleepWakeCallback will power on, Currenttime:3/31/2013 11:22:53.195 AM - Waketime:3/31/2013 11:22:43.930 AM = Deltatime:9.265338957
Mar 31 11:22:53 NAME loginwindow[31]: askForPasswordBuiltIn after makekey, Currenttime:3/31/2013 11:22:53.212 AM - Waketime:3/31/2013 11:22:43.930 AM = Deltatime:9.281565964
Mar 31 11:22:53 NAME loginwindow[31]: builtInAuthWindowBecameKey, Currenttime:3/31/2013 11:22:53.243 AM - Waketime:3/31/2013 11:22:43.930 AM = Deltatime:9.312892973
Mar 31 11:22:53 NAME configd[13]: network configuration changed.
Mar 31 11:22:54 NAME configd[13]: PMConnection AirPort configd plug-in com.apple.powermanagement.applicationresponse.slowresponse 9839 ms
Mar 31 11:22:54 NAME configd[13]: PMConnection IPConfiguration com.apple.powermanagement.applicationresponse.slowresponse 9849 ms
Mar 31 11:22:57 NAME configd[13]: network configuration changed.
Mar 31 11:22:57 NAME ntpd[20]: sendto(17.171.4.13) (fd=24): Network is unreachable
Mar 31 11:23:02 NAME loginwindow[31]: in pam_sm_authenticate(): Failed to determine Kerberos principal name.
Mar 31 11:23:02 NAME loginwindow[31]: builtInAuthWindowDidResignKey
Mar 31 11:23:02 NAME loginwindow[31]: handleUnlockResult, Currenttime:3/31/2013 11:23:02.536 AM - Waketime:3/31/2013 11:22:43.930 AM = Deltatime:18.606058955
Mar 31 11:23:32 NAME loginwindow[31]: no spins reported for this wake
Mar 31 11:27:31 NAME SubmitDiagInfo[9444]: Cleaning up expired diagnostic messages database at path: /var/log/DiagnosticMessages/2013.03.01.asl
Mar 31 11:33:29 NAME [0x0-0x3b63b6].org.mozilla.firefox[9264]: NOTE: child process received `Goodbye', closing down
Mar 31 11:36:14 NAME ntpd[20]: time reset -4.060579 s
Mar 31 12:11:05 NAME firefox[9264]: -deltaZ is deprecated for NSEventTypeMagnify. Please use -magnification.
Mar 31 15:19:22 NAME kernel[0]:
Mar 31 15:28:23 NAME kernel[0]:
Mar 31 15:28:53: --- last message repeated 7 times ---
Mar 31 15:28:23 NAME kernel[0]:
Mar 31 15:30:22 NAME kernel[0]:
Mar 31 15:56:08 NAME kernel[0]:
Mar 31 15:56:13: --- last message repeated 1 time ---
Mar 31 15:56:13 NAME loginwindow[31]: in pam_sm_authenticate(): Failed to determine Kerberos principal name.
Mar 31 15:56:16 NAME kernel[0]:
Mar 31 15:56:46: --- last message repeated 8 times ---
Mar 31 16:00:10 NAME kernel[0]:
Mar 31 16:00:40: --- last message repeated 3 times ---
Mar 31 16:00:44 NAME kernel[0]:
Mar 31 16:01:14: --- last message repeated 5 times ---
Mar 31 16:02:36 NAME kernel[0]:
Mar 31 16:03:06: --- last message repeated 9 times ---
Mar 31 16:03:22 NAME kernel[0]:
Mar 31 16:10:31 localhost com.apple.launchd[1]: *** launchd[1] has started up. ***
Mar 31 16:17:50 localhost DirectoryService[15]: Improper shutdown detected
Mar 31 16:17:54 localhost fseventsd[33]: event logs in /.fseventsd out of sync with volume. destroying old logs. (707133 444 707763)
Mar 31 16:17:54 localhost bootlog[41]: BOOT_TIME: 1364713830 0
Mar 31 16:17:58 localhost fseventsd[33]: log dir: /.fseventsd getting new uuid: NUMBER
Mar 31 16:17:58 localhost blued[42]: Apple Bluetooth daemon started
Mar 31 16:18:02 localhost mDNSResponder[28]: mDNSResponder mDNSResponder-258.21 (May 26 2011 14:40:13) starting
Mar 31 16:18:03 localhost com.apple.usbmuxd[21]: usbmuxd-296.4 on Dec 21 2012 at 16:11:14, running 64 bit
Mar 31 16:18:04 localhost configd[13]: bootp_session_transmit: bpf_write(en1) failed: Network is down (50)
Mar 31 16:18:04 localhost configd[13]: DHCP en1: INIT transmit failed
Mar 31 16:18:04 localhost configd[13]: network configuration changed.
Mar 31 16:18:04 NAME configd[13]: setting hostname to "NAME.local"
Mar 31 16:18:04 NAME /System/Library/CoreServices/loginwindow.app/Contents/MacOS/loginwindow[29]: Login Window Application Started
Mar 31 16:18:04 NAME configd[13]: network configuration changed.
Mar 31 16:18:04 NAME mDNSResponder[28]: mDNSPlatformSetDNSConfig: Error: dns_configuration_copy returned NULL
Mar 31 16:18:04 NAME configd[13]: network configuration changed.
Mar 31 16:18:11 NAME mds[27]: (Normal) DiskStore: Creating index for /
Mar 31 16:18:17 NAME loginwindow[29]: Login Window Started Security Agent
Mar 31 16:18:18 NAME WindowServer[71]: kCGErrorFailure: Set a breakpoint @ CGErrorBreakpoint() to catch errors as they are logged.
Mar 31 16:18:18 NAME com.apple.WindowServer[71]: Sun Mar 31 16:18:18 NAME.local WindowServer[71] <Error>: kCGErrorFailure: Set a breakpoint @ CGErrorBreakpoint() to catch errors as they are logged.
Mar 31 16:18:29 NAME SecurityAgent[92]: NSSecureTextFieldCell detected a field editor ((null)) that is not a NSTextView subclass designed to work with the cell. Ignoring...
Mar 31 16:18:30 NAME loginwindow[29]: Login Window - Returned from Security Agent
Mar 31 16:18:30 NAME loginwindow[29]: USER_PROCESS: 29 console
Mar 31 16:18:30 NAME com.apple.launchd.peruser.501[96] (com.divx.agent.postinstall): Unknown key: LimitToSessionType
Mar 31 16:18:30 NAME com.apple.launchd.peruser.501[96] (com.apple.ReportCrash): Falling back to default Mach exception handler. Could not find: com.apple.ReportCrash.Self
Mar 31 16:18:36 NAME root[113]: /usr/libexec/ntpd-wrapper: scutil key State:/Network/Global/DNS not present after 30 seconds
Mar 31 16:18:37 NAME root[130]: sntp options: a=2 v=1 e=0.100 E=5.000 P=2147483647.000
Mar 31 16:18:37 NAME root[130]: d=15 c=5 x=0 op=1 l=/var/run/sntp.pid f= time.apple.com
Mar 31 16:18:37 NAME root[130]: sntp: getaddrinfo(hostname, ntp) failed with nodename nor servname provided, or not known
Mar 31 16:18:38 NAME-2 com.apple.launchd.peruser.501[96] (com.apple.mrt.uiagent[123]): Exited with exit code: 255
Mar 31 16:18:38 NAME-2 com.apple.launchd.peruser.501[96] (com.apple.Kerberos.renew.plist[124]): Exited with exit code: 1
Mar 31 16:19:55 NAME-2 XProtectUpdater[19]: NSURLConnection error: Error Domain=NSURLErrorDomain Code=-1009 UserInfo=0x100174890 "This computer’s Internet connection appears to be offline." Underlying Error=(Error Domain=kCFErrorDomainCFNetwork Code=-1009 UserInfo=0x1001744e0 "This computer’s Internet connection appears to be offline.")
Mar 31 16:19:55 NAME com.apple.launchd[1] (com.apple.xprotectupdater[19]): Exited with exit code: 255
Mar 31 16:22:04 NAME kextd[10]: updated kernel boot caches
Mar 31 16:25:04 NAME Software Update[178]: SWU: scan found 0 products:
Mar 31 16:25:05 NAME Software Update[178]: Error Domain=NSURLErrorDomain Code=-1009 UserInfo=0x10052e600 "This computer’s Internet connection appears to be offline." Underlying Error=(Error Domain=kCFErrorDomainCFNetwork Code=-1009 UserInfo=0x10052f760 "This computer’s Internet connection appears to be offline.")
Mar 31 16:25:14 NAME com.apple.launchd[1] (com.apple.suhelperd[181]): Exited with exit code: 2
Mar 31 16:25:18 NAME configd[13]: network configuration changed.
Mar 31 16:26:17 NAME Software Update[188]: SWU: scan found 1 products:\n041-9605
Mar 31 16:26:30 NAME ntpd[18]: time reset +1.140167 s
Mar 31 16:26:57 NAME com.apple.launchd[1] (com.apple.suhelperd[190]): Exited with exit code: 2
Mar 31 16:26:57 NAME com.apple.launchd.peruser.501[96] ([0x0-0xf00f].com.apple.Console[142]): Exited: Killed
Mar 31 16:26:57 NAME com.apple.launchd.peruser.501[96] ([0x0-0x15015].com.apple.SoftwareUpdate[188]): Exited: Killed
Mar 31 16:26:57 NAME com.apple.launchd.peruser.501[96] (com.apple.AirPortBaseStationAgent[126]): Exited: Killed
Mar 31 16:26:57 NAME loginwindow[29]: DEAD_PROCESS: 29 console
Mar 31 16:26:57 NAME /System/Library/CoreServices/loginwindow.app/Contents/MacOS/loginwindow[200]: Login Window Application Started
Mar 31 16:26:58 NAME loginwindow[200]: USER_PROCESS: 200 console
Mar 31 16:26:58 NAME WindowServer[203]: kCGErrorFailure: Set a breakpoint @ CGErrorBreakpoint() to catch errors as they are logged.
Mar 31 16:26:58 NAME com.apple.WindowServer[203]: Sun Mar 31 16:26:58 NAME.local WindowServer[203] <Error>: kCGErrorFailure: Set a breakpoint @ CGErrorBreakpoint() to catch errors as they are logged.
Mar 31 16:26:59 NAME Software Update[209]: Looking for products to install
Mar 31 16:27:02 NAME Software Update[209]: Performing preflight
Mar 31 16:27:02 NAME Software Update[209]: Preparing session
Mar 31 16:27:02 NAME Software Update[209]: Starting session
Mar 31 16:27:03 NAME Software Update[209]: PKG: extracting "com.apple.pkg.MacBookProSMCUpdate"
Mar 31 16:27:03 NAME Software Update[209]: PKG: pre-flight scripts for "com.apple.pkg.MacBookProSMCUpdate"
Mar 31 16:27:03 NAME Software Update[209]: PKG: pre-install scripts for "com.apple.pkg.MacBookProSMCUpdate"
Mar 31 16:27:16 NAME Software Update[209]: REQ: moving files into place with shove
Mar 31 16:27:17 NAME Software Update[209]: PKG: post-install scripts for "com.apple.pkg.MacBookProSMCUpdate"
Mar 31 16:27:17 NAME Software Update[209]: PKG: post-flight scripts for "com.apple.pkg.MacBookProSMCUpdate"
Mar 31 16:27:17 NAME Software Update[209]: PKG: writing receipt for "com.apple.pkg.MacBookProSMCUpdate"
Mar 31 16:27:17 NAME Software Update[209]: REQ: install succeeded
Mar 31 16:27:18 NAME Software Update[209]: SWU: installing "MacBook Pro SMC Firmware Update, 1.6"
Mar 31 16:27:20 NAME [0x0-0x1a01a].com.apple.SoftwareUpdate[209]: /: no supported helper partitions to update.
Mar 31 16:27:20 NAME kextd[10]: updated kernel boot caches
Mar 31 16:27:20 NAME Software Update[209]: kextcache returned 0
Mar 31 16:27:20 NAME Software Update[209]: Running /sbin/reboot
Mar 31 16:27:20 NAME reboot[242]: rebooted by Caithris
Mar 31 16:27:20 NAME reboot[242]: BOOT_TIME: 1364714840 524942
Mar 31 16:27:20 NAME mDNSResponder[28]: mDNSResponder mDNSResponder-258.21 (May 26 2011 14:40:13) stopping
Mar 31 16:27:20 NAME DirectoryService[15]: BUG in libdispatch: 10K549 - 1960 - 0x10004004
Mar 31 16:27:20 NAME WindowServer[203]: hidd died. Reestablishing connection.
Mar 31 16:27:20 NAME WindowServer[203]: Unable to create event queue via hidd: (0x10000003)
Mar 31 16:28:03 localhost com.apple.launchd[1]: *** launchd[1] has started up. ***
Mar 31 16:29:52 localhost bootlog[47]: BOOT_TIME: 1364714882 0
Mar 31 16:29:53 localhost mDNSResponder[34]: mDNSResponder mDNSResponder-258.21 (May 26 2011 14:40:13) starting
Mar 31 16:29:54 localhost configd[13]: network configuration changed.
Mar 31 16:29:54 NAME configd[13]: setting hostname to "NAME.local"
Mar 31 16:29:54 NAME com.apple.usbmuxd[27]: usbmuxd-296.4 on Dec 21 2012 at 16:11:14, running 64 bit
Mar 31 16:29:56 NAME blued[17]: Apple Bluetooth daemon started
Mar 31 16:29:57 NAME /System/Library/CoreServices/loginwindow.app/Contents/MacOS/loginwindow[35]: Login Window Application Started
Mar 31 16:29:59 NAME configd[13]: network configuration changed.
Mar 31 16:30:12: --- last message repeated 2 times ---
Mar 31 16:30:12 NAME ntpd[24]: time reset +0.227711 s
Mar 31 16:30:13 NAME loginwindow[35]: Login Window Started Security Agent
Mar 31 16:30:14 NAME WindowServer[61]: kCGErrorFailure: Set a breakpoint @ CGErrorBreakpoint() to catch errors as they are logged.
Mar 31 16:30:14 NAME com.apple.WindowServer[61]: Sun Mar 31 16:30:14 NAME.local WindowServer[61] <Error>: kCGErrorFailure: Set a breakpoint @ CGErrorBreakpoint() to catch errors as they are logged.
Mar 31 16:30:21 NAME SecurityAgent[96]: NSSecureTextFieldCell detected a field editor ((null)) that is not a NSTextView subclass designed to work with the cell. Ignoring...
Mar 31 16:30:22 NAME loginwindow[35]: Login Window - Returned from Security Agent
Mar 31 16:30:22 NAME loginwindow[35]: USER_PROCESS: 35 console
Mar 31 16:30:22 NAME com.apple.launchd.peruser.501[99] (com.divx.agent.postinstall): Unknown key: LimitToSessionType
Mar 31 16:30:22 NAME com.apple.launchd.peruser.501[99] (com.apple.ReportCrash): Falling back to default Mach exception handler. Could not find: com.apple.ReportCrash.Self
Mar 31 16:30:32 NAME com.apple.launchd.peruser.501[99] (com.apple.mrt.uiagent[124]): Exited with exit code: 255
Mar 31 16:30:35 NAME com.apple.launchd.peruser.501[99] (com.apple.Kerberos.renew.plist[125]): Exited with exit code: 1
Mar 31 16:30:47 NAME mdworker[81]: (Error) SyncInfo: Catalog changed during searchfs too many times -- falling back to fsw search /
Mar 31 16:36:05 NAME mdworker32[158]: kCGErrorFailure: Set a breakpoint @ CGErrorBreakpoint() to catch errors as they are logged.
Mar 31 16:36:22 NAME mdworker32[161]: kCGErrorFailure: Set a breakpoint @ CGErrorBreakpoint() to catch errors as they are logged.
Mar 31 16:36:29 NAME [0x0-0x10010].org.mozilla.firefox[149]: NOTE: child process received `Goodbye', closing down
Mar 31 16:39:07 NAME mdworker[157]: Warning: unknown JFIF revision number 0.01
Mar 31 16:39:22 NAME login[182]: USER_PROCESS: 182 ttys000
Mar 31 16:40:34 NAME /System/Library/CoreServices/CCacheServer.app/Contents/MacOS/CCacheServer[132]: No valid tickets, timing out
Mar 31 16:40:35 NAME mdworker[157]: Error, could not create MachMessagePort for com.apple.AddressBook.abd
Mar 31 16:40:37 NAME mdworker[157]: Unable to parse date (<XHTML-STRIPONREPLY>
</XHTML-STRIPONREPLY>)
Mar 31 16:40:38 NAME mdworker[157]: Unable to parse date ( S<XHTML-STRIPONREPLY>
</XHTML-STRIPONREPLY>him to any)
Mar 31 16:40:41: --- last message repeated 1 time ---
Mar 31 16:40:41 NAME mdworker[157]: Invalid char \n for PropertyName in line 1
Mar 31 16:40:41 NAME mdworker[157]: Invalid char \n for PropertyName in line 2
Mar 31 16:40:41 NAME mdworker[157]: Invalid char \n for PropertyName in line 3
Mar 31 16:40:41 NAME mdworker[157]: Invalid char \n for PropertyName in line 4
Mar 31 16:40:41 NAME mdworker[157]: Invalid char \n for PropertyName in line 5
Mar 31 16:40:41 NAME mdworker[157]: Invalid char \n for PropertyName in line 6
Mar 31 16:40:41 NAME mdworker[157]: Invalid char \n for PropertyName in line 7
Mar 31 16:40:41 NAME mdworker[157]: Invalid char \n for PropertyName in line 8
Mar 31 16:40:41 NAME mdworker[157]: Invalid char \n for PropertyName in line 9
Mar 31 16:40:41 NAME mdworker[157]: Invalid char \n for PropertyName in line 10
Mar 31 16:40:41 NAME mdworker[157]: Invalid char \n for PropertyName in line 11
Mar 31 16:40:41 NAME mdworker[157]: Invalid char \n for PropertyName in line 12
Mar 31 16:40:41 NAME mdworker[157]: Invalid char \n for PropertyName in line 13
Mar 31 16:40:41 NAME mdworker[157]: Invalid char \n for PropertyName in line 14
Mar 31 16:40:41 NAME mdworker[157]: Invalid char \n for PropertyName in line 15
Mar 31 16:40:41 NAME mdworker[157]: Invalid char \n for PropertyName in line 16
Mar 31 16:40:41 NAME mdworker[157]: Invalid char \n for PropertyName in line 17
Mar 31 16:40:41 NAME mdworker[157]: Invalid char \n for PropertyName in line 18
Mar 31 16:40:41 NAME mdworker[157]: Invalid char \n for PropertyName in line 19
Mar 31 16:40:41 NAME mdworker[157]: Invalid char \n for PropertyName in line 20
Mar 31 16:40:41 NAME mdworker[157]: Invalid char \n for PropertyName in line 21
Mar 31 16:40:41 NAME mdworker[157]: Invalid char \n for PropertyName in line 22
Mar 31 16:40:41 NAME mdworker[157]: Invalid char \n for PropertyName in line 23
Mar 31 16:40:41 NAME mdworker[157]: Invalid char \n for PropertyName in line 24
Mar 31 16:40:41 NAME mdworker[157]: Invalid char \n for PropertyName in line 25
Mar 31 16:40:41 NAME mdworker[157]: Invalid char \n for PropertyName in line 26
Mar 31 16:40:41 NAME mdworker[157]: Invalid char ^M for PropertyName in line 26
Mar 31 16:40:41 NAME mdworker[157]: Invalid char \n for PropertyName in line 26
Mar 31 16:40:41 NAME mdworker[157]: Invalid char ^M for PropertyName in line 26
Mar 31 16:40:41 NAME mdworker[157]: Invalid char \n for PropertyName in line 26
Mar 31 16:40:43 NAME mdworker[157]: Invalid char \n for PropertyName in line 1
Mar 31 16:40:43 NAME mdworker[157]: Invalid char \n for PropertyName in line 2
Mar 31 16:40:43 NAME mdworker[157]: Invalid char \n for PropertyName in line 3
Mar 31 16:40:43 NAME mdworker[157]: Invalid char \n for PropertyName in line 4
Mar 31 16:40:43 NAME mdworker[157]: Invalid char \n for PropertyName in line 5
Mar 31 16:40:43 NAME mdworker[157]: Invalid char \n for PropertyName in line 6
Mar 31 16:40:43 NAME mdworker[157]: Invalid char \n for PropertyName in line 7
Mar 31 16:40:43 NAME mdworker[157]: Invalid char \n for PropertyName in line 8
Mar 31 16:40:43 NAME mdworker[157]: Invalid char \n for PropertyName in line 9
Mar 31 16:40:43 NAME mdworker[157]: Invalid char \n for PropertyName in line 10
Mar 31 16:40:43 NAME mdworker[157]: Invalid char \n for PropertyName in line 11
Mar 31 16:40:43 NAME mdworker[157]: Invalid char \n for PropertyName in line 12
Mar 31 16:40:43 NAME mdworker[157]: Invalid char \n for PropertyName in line 13
Mar 31 16:40:43 NAME mdworker[157]: Invalid char \n for PropertyName in line 14
Mar 31 16:40:43 NAME mdworker[157]: Invalid char \n for PropertyName in line 15
Mar 31 16:40:43 NAME mdworker[157]: Invalid char \n for PropertyName in line 16
Mar 31 16:40:43 NAME mdworker[157]: Invalid char \n for PropertyName in line 17
Mar 31 16:40:43 NAME mdworker[157]: Invalid char \n for PropertyName in line 18
Mar 31 16:40:43 NAME mdworker[157]: Invalid char \n for PropertyName in line 19
Mar 31 16:40:43 NAME mdworker[157]: Invalid char \n for PropertyName in line 20
Mar 31 16:40:43 NAME mdworker[157]: Invalid char \n for PropertyName in line 21
Mar 31 16:40:43 NAME mdworker[157]: Invalid char \n for PropertyName in line 22
Mar 31 16:40:43 NAME mdworker[157]: Invalid char \n for PropertyName in line 23
Mar 31 16:40:43 NAME mdworker[157]: Invalid char \n for PropertyName in line 24
Mar 31 16:40:43 NAME mdworker[157]: Invalid char \n for PropertyName in line 25
Mar 31 16:40:43 NAME mdworker[157]: Invalid char \n for PropertyName in line 26
Mar 31 16:40:43 NAME mdworker[157]: Invalid char ^M for PropertyName in line 26
Mar 31 16:40:43 NAME mdworker[157]: Invalid char \n for PropertyName in line 26
Mar 31 16:40:43 NAME mdworker[157]: Invalid char ^M for PropertyName in line 26
Mar 31 16:40:43 NAME mdworker[157]: Invalid char \n for PropertyName in line 26
Mar 31 16:40:43 NAME mdworker[157]: Invalid char ^M for PropertyName in line 26
Mar 31 16:40:43 NAME mdworker[157]: Invalid char \n for PropertyName in line 26
Mar 31 16:41:27 NAME mdworker[157]: Corrupt JPEG data: 1 extraneous bytes before marker 0xd9
Mar 31 16:41:27 NAME mdworker[157]: JPEG datastream contains no image
Mar 31 16:41:33: --- last message repeated 1 time ---
Mar 31 16:41:33 NAME login[182]: DEAD_PROCESS: 182 ttys000
Mar 31 16:41:50 NAME mdworker[156]: iCal.mdimporter: could not parse ICS file: /Applications/Microsoft Office 2011/Office/OutlookCore.framework/Versions/14/Resources/en.lproj/Timezones.ics
Mar 31 16:41:51 NAME mdworker32[204]: kCGErrorFailure: Set a breakpoint @ CGErrorBreakpoint() to catch errors as they are logged.
Mar 31 16:43:41 NAME [0x0-0x10010].org.mozilla.firefox[149]: NOTE: child process received `Goodbye', closing down
Mar 31 17:07:10 NAME firefox[149]: -deltaZ is deprecated for NSEventTypeMagnify. Please use -magnification.
Thanks again- I mean it. It's lousy being stuck away from home when crazy thing happen to your main line of communication!
-Caithris

The gray screen with loading bar issue is a at boot fsck (file system check) that has discovered something wrong with your boot drive/partition and was attempting to fix it.
OS X is booting but can't complete, so that means your hard drive is good, just likely has been either subjected to shock which damaged data on the platters, or bad sectors (the drive is dying if after fixing it, problems occurs again), or something messed something up in the file structure.
Firefox is currently at 19.02, so it appears your background auto-update has not been occurring, which makes me suspect the machine's data is broken in some manner or you have malware on the machine blocking the updates.
Your problems are multiple, in your case I advise a complete erase and install.
1: If you have a backup of your user data on a external storage drive (not TimeMachine as it might be corrupted and compromised with malware it's just going to restore back) then your good, else you have to do this.
Create a data recovery/undelete external boot drive
Copy your data to a blank plain jane external storage drive as you want no executable files on it when you connect to the cleaned machine later.
2: Once your data is safely copied (copy visible files manually and what you know is good, not folders that can contain invisible malware programs!) then disconnect the drive(s)
3: Next assume all writeable media is contaminated with malware and treat as so. Even if you erased it.
4: Stick in your 10.6 install disk and reboot holding the c or option key down. You want Disk Utility and you want to select the ENTIRE internal drive and MUST USE the Security Option > Zero All Data (unless your in the military then use 7x erase, do not use 35x as it will take weeks and is unnecessary)
The Zero/7x erase will do two things, do a low level format and erradicate everything (including hidden stuff and deleted files) also will map off any failing sectors on the hard drive.
5: Follow the procedure here to install 10.6
How to erase and install Snow Leopard 10.6
6: Reboot the machine twice, then once you set up the machine (using a alias of course and not allowing registration), use a secured network and IMMEDIATLY Software update to 10.6.8, if you can download the 10.6.8 Combo update on another secure machine to a (new) USB thumb drive and install it on the clean Mac, do that instead.
WiFi security issues, at home and WiFi hotspots
https://support.apple.com/kb/DL1399
Still run Software update afterwards as Apple might not have fully updated the combo update yet.
7: Once you machine is secure, download the free ClamXav and run a scan on the external storage drive with just your files, perhaps one or more PDF's or other files are not what they seem to be.
8: Make sure to install fresh copies of software from original sources and not from rewriteable media, update them to be current. Malware can be hidden in copies of programs.
9: Trash all your rewritable media, or use a Linux PC or Linux Mint in a virtual machine (VirtualBox) on another computer like Windows to scrub and reformat all the rewritable media before attaching them to the clean Mac. You have to make sure it's getting the entire media.
10: Once your machine is set back up, then make clones and time and date them.
Most commonly used backup methods
If your still having problems with the machine, it's likley a failing hard drive and you will have to replace it and repeat the steps above pretty much.
Really it's best to replace the drive in the interest of security.
Install/upgrade RAM or storage drive in Mac's
For performance of Snow Leopard, check out this tip
For Snow Leopard Speed Freaks
Your overseas, if your in a foriegn country you have to assume FinSpy is being installed on your machine (uses a older iTunes verison "update" to get on) or there is other tricks via the ISP to install something on your machine. So mix things up and don't stick any old USB you see laying around into your Mac.
https://discussions.apple.com/community/notebooks/macbook_pro?view=documents#/

Mac Pro stuck on gray screen after installing software for a new keyboard

I am having a huge issue with my very important work computer! For a few weeks, my Mac has been freezing on the gray screen during start up. Since I had two external hard drives plugged in, I would unplug one of them and the Mac would always restart correctly once one was unplugged. Well today I was installing software for a new keyboard and the mac prompted me to restart. Once I restarted, the gray screen came up again and no matter what I did it would not start up correctly again. I tried unplugging everything except the keyboard and monitor and nothing works. I tried ejecting the crash-causing CD with the keyboard using all of the commands I found on this forum board and nothing worked. I saw forums about manually ejecting the CD by pushing a pin-hole but I cannot find that pinhole anywhere! Then again, the CD might not even be the problem but since the computer gave me the gray screen of death right after using the CD I am thinking that it is the problem. I use this computer for editing a TV show and creating websites so there is a ton of files on it and I need to get it up and running again ASAP. Any suggestions would be appreciated and I am sure by now you can tell that I am not a Mac expert so please dumb it down for me. Thank you!!

I would start by breaking your thoughts and sentences out from one long paragraph.
Start at the basics.
Always have backups.
One at least that is a spare boot system you can use.
Clone your system. SuperDuper does a great job for only $29
Boot from another hard drive or last OS X DVD
Repair your drive with Apple Disk Utility along with 3rd party disk maintenance and repair
Hold Option key until the boot manager, then hold mouse to open optical drive.
You can hold mouse on startup and it will eject also.
Hold and continue to hold Shift key during startup to repair the boot drive in minimal fashion.
What device and driver? hint: never use CD, just go online as the CD is usually out of date anyway.
Fill in Mac OS X version and more about hardware would help in posts and in your profile signature.
http://www.shirt-pocket.com/SuperDuper/SuperDuperDescription.html
http://www.macintouch.com/readerreports/harddrives/index.html#d12aug2010
http://www.alsoft.com/DiskWarrior

HT201475 Problem with gray screen after connecting external drive

I attached a LaCie external drive to back up photos and iTunes on iMac running Mountain Lion OS. I'm trying to resize partitions to back up but after attaching I'm having problems restarting and/or shutting down. I keep getting gray screen And have to shut down to start up. Now my external drive only shows one partition on desk top and I can't access in disk utility at all.

Hi!
We are having the same problem for years now (Forms10g with webutil) and had no solution but disabling the client cache. But this has to be done on the client.
In this Thread webutil&forms11g R2 64bit
a solution from oraclemysupport is mentioned, which can be done on the server:
JRE CRASHES/HANGS THE BROWSER HAVING HYPERTHREADING ENABLED [ID 601534.1]
(Solution 2)
We'l give it a try....

Dual 1Ghz PowerMac G4 gray screen after booting

Greetings
Please can someone give me some more ideas to try, my G4 dual 1Gz system boots in to the operating system fine but after a while I get the gray screen crash, can be quick can be a while. I've reinstalled the operating system after formatting the HHD, I've done the disk utility repairs, I've swapped out the video card and the ram and its still doing it.
Any further ideas would be appreciated.
Rgds
James

Sounds like it's going out.
I would try running the extended version of your Apple Hardware Test.
It's not perfect but may flag something.
DALE

Beach Ball of Death, Dark Gray Screen after Clean OS ReInstall- Please Help

My 13" MBP is less than two months old.
I read online somewhere that a company that buys large quantities of Macs has a strategy for combating the industry standard 5% hard drive failure in new notebooks. It said something along the lines of performing a clean install / reformat of OS X was a good idea to see if any problems arise- then the HD would likely have problems in the near future, etc...
Being the nerd that I am I performed a clean install on my MBP. I had just performed one the day before on my other Mac (which worked perfectly).
First of all, my MBP took roughly 15 minutes to boot from the disk (to begin the reinstall). Actually one time I gave it over 20 minutes and it never did load. Once I finally got to the Language select screen it froze, clicking the continue arrow did nothing and I couldn't even choose another language. So I shut down and tried again. The DVD doesn't look scratched. Is my drive less than stellar?
This time, it worked, albeit, it took much longer to install than my lesser powered Mac Mini. OS X notified me that the installation was successful and that it now simply needed to restart. Upon restart I was greeted with a dark gray screen and mouse cursor spinning beach ball (that responded to trackpad).
Shut down, turned it back on- same thing. Tried a bunch more times, no luck.
Called Apple Care and after a few questions / tips we concluded that it needed to be sent in, the associate imagined it was a HD problem.
I took my MBP to a local authorized service provider and they took it, and called me back in a few hours. I asked what they did to fix it, and they skillfully dodged the question. They said it should be good now, that it passed all hardware tests, but to let them know if it happened again.
Since then it's been running okay. As a nerd it's a bit bothersome to know that I can't perform a clean install when I see fit- and that if I did, I'd have to take it into Apple Care again in the future, and once Apple Care runs out than a clean install just isn't an option.
It boots up just as fast, but when it gets passed the white screen with the Apple logo... when the desktop is loading I noticed that it stays at the flash of the solid blue desktop a bit longer than usual (the second before it loads your desktop bg image). It also seems that fully loading all of the top right menu bar items takes a bit longer than before.
Also, not sure if the hard drive's sudden motion sensor is going haywire. But randomly, the hard drive will make a singular faint "thud / click" noise. Very faint. But it's not your usual "reading data from the HD" hard drive thrashing noise you hear when you open an app / file. It's a single, more sudden noise, but like I said it is fairly quiet- I hear it when I have literally nothing running except this Safari window. This is something I didn't notice the first few weeks with the MBP.
Also in system profiler, the battery's condition was never good, but only "Normal." I did calibrate my battery one of the first days I had it.
Here's some coconutBattery info:
Current Battery Capacity: 5588 mAh
Original Battery Capacity: 5770 mAh
Which is 96%.
Load cycles: 10
Anyways, curious if anyone has any ideas about my inability to perform a clean install and successfully boot up? I don't see any reason why it should have taken THAT long to boot from the disk, frozen in several random spots throughout, and then not be able to boot up.
The HD noises aren't a huge deal just a bit concerning, and admittedly the battery info is just nerdy paranoia. Just curious what's going on with my MBP. Is there anything I can do, or should read?

Hi simplecoder13,
I perform a similar process on all the HDs that I buy, only I take it a step further. I'll run a single pass erase on drives under 500GB and a seven pass erase on drives larger than 500GB and ones that are deemed "mission critical." Here's an interest metric, though.
Since 01/01/10 on laptop drives (Seagate, Western Digital, Hitachi)
+HDs purchases - 461+
+Drives > 500GB - 119+
+Drives < 500GB - 342+
+Drives that fail zero test - 13+
+Drives that pass zero test, fail within 30 days - 2+
+Drives that pass zero test, fail within 60 days - 0+
+Drives that pass zero test, fail within 90 days - 3+
+Drives that pass zero test, fail within 180 days - 4+
+Total drive failures within 6 months - 22 (4.77%) ~ 5%+
I don't have a manufacturer break down, I suppose I should start logging that more closely. Anyway...
I have a new MacBook Pro (13" @ 2.4GHz) and booting off the installation disc, from selecting the installer disc via the boot manager to the language selection screen is ~ 6 mins and 44 seconds. I use that as an average, I did it over 10 restarts but it was a pretty fair assessment. The fact that the installer is freezing is definitely cause for alarm, that's not normal or to be expected. Process of elimination would tell me the following:
1.) The disc is bad
2.) The optical drive is bad
My understanding of the installer is the HD isn't initially accessed during the installer until you choose an install location (at which point it's mount point is verified).
Regarding the battery, your full charge capacity is going to bounce around the first couple of months, usually anywhere from 250-400 mAh. I noticed sporadic reporting until I reached the 50 cycle mark (or around 6 months based on usage). That being said, I don't see any problems or cause for alarm with the information you've reported.

Yosemite crashes on gray screen after I enter my password

Similar Messages

Maybe you are looking for