Yosemite - Desktop Call doesn't work

I have a Late 2011 Macbook Pro and I've just upgraded to Yosemite. However, I can't receive my calls from my MBP. The notification which should be appearing on the upper right corner, doesn't show up. Any ideas, why ?

Do you know if there is anyway you can be signed in with a different apple ID for iCloud and a different apple ID for FaceTime. My id for FaceTime is different and has my phone number associated with it. Thank you.

Similar Messages

On Yosemite outgoing calls doesn't works

Hi there,
I have and MacBook Pro (Retina, 15-inch, Early 2013) OS X Yosemite (10.10) and iPhone 4S iOS 8.0.2
Actually I can receive a call on my Mac and it work very good but when I try to make a call from my Mac it doesn't work. I see the advice: "...you have to use the same iCloud account..."
What could be?
Thanks!

In addition to what Greg suggested, you also need to check the option "Use ext. ph number mask " option under route patterns or under each individual route list - > set the Ext ph number mask to On.
You can find detailed steps here.
http://www.cisco.com/univercd/cc/td/doc/product/voice/c_callmg/4_1/sys_ad/4_1_3/ccmcfg/index.htm
With CME, you can use dialplan patterns. HEre is a good link
http://www.cisco.com/en/US/products/sw/voicesw/ps4625/products_configuration_guide_chapter09186a00806a7fe1.html
HTh
Sankar
PS: please remember to rate posts!

Adobe Creative Cloud Desktop App Doesn't Work Windows 8.1

The Creative Cloud Desktop App doesn't work on my PC running Windows 8.1. As shown below, no apps appear and the settings dropdown does not function with either left or right click. I have tried to uninstall, reinstall, change the name of the OOBE folder, connect directly to my cable modem by passing my router, removing all internet & firewall protection and I am unable to download any CC apps that I do not have on my PC. I have been updating existing apps from the help menus in the apps and have not used the CC app for downloads for a long time so I do not know when the problem started, but it does not work now. Any suggestions would be appreciated. Automatic updates are also not working.
Thanks,
Barry

Turning off "Enable Protected Mode" in the Security Tab of Internet Properties allowed the Creative Cloud Desktop App to function properly. I am still looking for a better long term solution that does not put my computer's security at risk.

Video call doesn't work on iphone 6 iOS 8.1.3

I have a iphone 6 with iOS 8.1.3, updated skype to version 5.10, all functions works fine but video call. the icon of video call doesn't respond (it stays blue when you click it), camera was turned on in setting also under privacy, I can use camera to take my photo for screen photo, that means the camera was setting correctly, but only video call doesn't work, can anyone help? Thanks a lot in advance.

Try to reset the phone by holding the sleep and home button for about 10sec, until the Apple logo comes back again. You will not lose any data by resetting, but it can cure some glitches.
If this does not help, setting it up as new device would be the next step:
How to erase your iOS device and then set it up as a new device or restore it from backups

Comcast came to fix my internet. My AIRPORTWIFI now only works with desktop. it doesn't work with my IPhone or IPad. Why? What can I do?

Comcast came to fix my internet. My AIRPORTWIFI now only works with desktop. it doesn't work with my IPhone or IPad. Why? What can I do?

Hello lila54,
It sounds like your Wi-Fi network is working if your desktop works with it, we just need to get the Wi-Fi on your iPhone and iPad connected to it. I found a couple of resources to help with not being able to connect to Wi-Fi on an iOS device.
I recommend following the steps in this tutorial first (the steps should work on the iPhone and iPad):
Join a network
http://www.apple.com/support/iphone/assistant/wifi/
If you are still having trouble connecting to Wi-Fi, follow the steps in this article (you can skip any steps you have already taken):
iOS: Troubleshooting Wi-Fi networks and connections
http://support.apple.com/kb/ts1398
Thank you for posting in the Apple Support Communities.
Best,
Sheila M.

Scared to update to Yosemite, If it doesn't work can you get everything back?

I am currently on 10.6.8. I wanted to update to Yosemite but I am scared to because I do not want to lose all of my files. Is there anyway if it doesn't work and freezes that I can get all of my files back and 10.6.8 back? And if you can get them back, How? I am not that good with technology and I don't want to mess the computer up. Thanks for all of the help, Carl.

You will need to do a good backup (I'd suggest getting the trial of carbon copy cloner, and cloning, not copying, your entire system to an external drive.) If you simply upgrade over the top of your current system, you are likely to find a mass of incompatible apps, which will need upgrading.
I'd suggest the best thing to do is the following
a) do the backup (do it anyway, you dont want to lose your files for any reason, never mind upgrading the OS)
b) check that your hardware is compatible with Yosemite (http://osxdaily.com/2014/06/03/os-x-yosemite-system-requirements-compatible-macs -list/ will tell you)
c) IF its compatible and after you have made a clone or copy of your current system (even Time Machine would be a better option than nothing at all) you should do a CLEAN install of Yosemite.
d) If the install goes OK and everything looks like its working the way it should, you could migrate your files and info from your clone or time machine.
And cross your fingers.

"Request Desktop Site" doesn't work on some sites

Hi,
I've notice some mobile website won't direct me to desktop version of them after I explictly check the option. Even the addon "Phony" doesn't work.
I guess Firefox is not at fault, but in any case if it ever happens, is there any a workaround to request for viewing the desktop site?
For example:
http://www.tomshardware.com/reviews/high-end-pc-audio,3733.html

It happens some time, because the website force to use the mobile version

Cassette Tape Call Doesn't Work

So I have a Monster Cassette adapter I use for my car. I had it for my 3G.
The mp3 works fine, but the calls doesn't. Before the 4.0 update, it was fine. I can use it like a bluetooth.
Is anyone else having this issue?
Thanks in advance!

Not sure the sip message flow and callmanager trace, but here is some general idea.
Did the ccm send 180/183, if it has sent to outside caller's service provider, the service provider is responsible to provide the ringback tone except they require in-band ringback tone via PRACK.

MacPro 2013 Yosemite Cellular Call Handoff Not Working

I've got a new MacPro 2013 Quad and have recently installed Yosemite 10.10. I've got a Logitech C615 USB Webcam which worked just fine for FaceTime in 10.9 and was expecting to be able to use it for cellular call handoff in Yosemite. For some reason, handoff of phone calls is not working. My Mac will "Ring" but as soon as I accept, the call fails. Moreover, on my iPhone 6 Plus it says "call cancelled" when I view recent calls. When I originate a call from my MacPro, the phone will ring once and then show "call failed" with the same error on my phone. Thinking perhaps it was the USB webcam (which now seems glitchy in Yosemite), I disconnected it and attempted to use my Focusrite 8i6 for a phone call, but was met with the same error messages. Accepting and originating calls from my MacBook Air using the same setup works fine.
Does anyone have any ideas what's going on? Anyone have any luck making or receiving cellular calls on the MacPro 2013 and, if so, what is your setup?
Thanks for any advice you can offer.

Hey rczig2323,
Thanks for the question. I understand that you are experiencing issues with Continuity in regards to phone calls. The following resources may provide a solution:
Connect your iPhone, iPad, iPod touch, and Mac using Continuity
http://support.apple.com/kb/HT6337
Get help using Continuity with iOS 8 and OS X Yosemite
http://support.apple.com/kb/TS5458
Thanks,
Matt M.

Desktop ethernet doesn't work with university wall connection

I was using my desktop at my house prior to moving to college this year and its ethernet connection worked fine. When I plugged in to the wall in my student housing apartment, it won't connect. iwconfig says eth0 no wireless extensions. I tried to run ifcfg eth0 up but it says some host already uses up on eth0. It's really bizarre because nothing has changed; it worked at home and now plugging into an ethernet cable doesn't work. It does work when I plug it into my laptop running windows so I know the internet provider and router are working.

iwconfig is correct, isn't it? eth0 is a wired connection as you explain it so iWconfig won't be much help. You may find it helpful to review https://wiki.archlinux.org/index.php/Be … he_network.
Do the same settings work at home and at school for your laptop?
If this is a university set up, is your laptop registered but not your desktop, for example? Most university networks don't allow you to just plug in and have it work - they only recognise registered machines.
Otherwise, you'll have to give a lot more information if you want help e.g. what sort of connection you're using, security, how you're trying to configure it, exact error messages, logs...

Show Desktop shortcut doesn't work anymore...

I've setted SHIFT+F10 as show desktop shortcut, but it doesn't work anymore... in fact no shortcut works anymore, COMMAND/SHIFT/OPTION+F1-2-3-etc.... nothing works!
someone knows why?

I'm having the same problem. Show Desktop works if I assign it to Shift, Control, or whatever, but it doesn't work when it is assigned to an F-key. Shift/Control/Fn + F-key doesn't work either.
Is there a plist file that I need to trash somewhere?
Thanks

Since updating to Yosemite Apple remote doesn't work

Hello all,
I have a bit of a problem, since updating to Yosemite my Apple remote stopped working on my iMac (27-inch, Mid 2011). It worked before the update without a hitch, but now I can't pair it to the computer.
It is a 7 button remote in question, tried pairing it as before using the right arrow + menu but nothing happens. I have also tried with a new battery so this not the issue.
I guessed it needed to be "re-paired" to it again so I have followed the instructions System Preferences / Security & Privacy / General / Advanced but I don't have the “Disable remote control infrared receiver.” option to be found...
I tried googling the solution but with no luck so I rely on your advice, please
Here is also a print screen of my Security & Privacy window...
It is not a major issue but it is a bit of an inconvenience....
Thnx!

Here's mine, the lower one

IPhone 4 calling doesn't work

Hey I just bought a used iPhone 4 the calling won't work like the time runs but not saying connected, or no sound at all coming out of ear peice or head phones I don't know what the problem is I got the earpiece replaced and nothing please help

Hey rajeshsubbiya,
That definitely sounds frustrating, the following articles may provide more help in isolating this issue.
iPhone: Sound muffled or low from the speaker or when speaking into the mic
http://support.apple.com/kb/TS1631
iPhone: Can't hear through the receiver or speakers
http://support.apple.com/kb/TS1630
Thanks,
Matt M.

IChat video call doesn't work.

When I try to video call, it doesn't go through. It says it is starting the call but on the other person's screen it still says waiting. Why doesn't iChat video work?

Hi,
Version of iChat ?
To which Version of iChat ?
Countries involved ?
If within the United States which parts (you will have to tell me North, South, East or West as State names don't really mean anything to me.
Internet Providers ?
10:51 PM Monday; August 27, 2012
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
 iMac 2.5Ghz 5i 2011 (Lion 10.7.2)
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb (Snow Leopard 10.6.8)
 Mac OS X (10.6.8),
"Limit the Logs to the Bits above Binary Images."  No, Seriously

¿Why sms and cell calls doesn't work on mac?

I downloaded iOS 8.1 and have yosemite OS installed in my mac. i have tried to use the calls and sms feature but none of this works.
In the calls when i try to call someone a message pops up saying that i must have an iphone and a mac with the same iCloud and FaceTime account. But the devices that i'm using do have the same accounts and still does't work!!
I have noticed that my phone number does't appear with a check and that in the FaceTime of my iphone a message down the switch to activates says "waiting for activation", but i can still make normal FaceTime calls. does this have something to do? how do i fix it? i have tried to reset the settings but everything is still the same.
In the sms feature the same message "waiting for activation" is down the iMessage title, i can send iMessages but when i try to activate sms a message says "enter the code displayed on the other device" but the code in my mac never shows up. What's the problem here? i have also tried to reset the settings and rebooting the devices but it's the same. Does this has to do with my phone number being unchecked? the problem is that i can't check it, the opti
Please help me.

Hello...
The SMS Relay and Phone Calls only work with a Mac device with Bluetooth 4.0 and later. If you want to see if your device has this, click on the Apple menu in the Menu Bar and choose About this Mac. A window then comes up with device information. Click System Report. On the sidebar, choose Bluetooth. At the top of the window it says Apple Bluetooth Software Version. If the number next to it is less than 4.0, your Mac device is too old. If it is above 4.0, your internet connection may have problems. Also if it says No next to Handoff supported, one of the devices is too old.
Good luck

Yosemite - Desktop Call doesn't work

Similar Messages

Maybe you are looking for