Yosemite doesn't reconize my audio interface

Hi,
I installed Yosemite before a got my new audio interface, Terrasoniq Phase X64 USB - USB 2.0, and I've been trying to install it since but is not working. When i go to my audio preferences my audio interface doesn't appears.
What is the best thing to do? to re-install maverick?? or there is any other way to get this working?

There's one thing I can add. This driver is quite buggy. Time after time I get kernel panics because of it:
      Kernel Extensions in backtrace:
         de.musonik.phasex64.usbdriver(2.0.4)[D791A3C5-E085-442D-72D3-F79DE846AAD7]@0xff ffff7f8c736000->0xffffff7f8c770fff
            dependency: com.apple.iokit.IOUSBFamily(710.4.14)[4030C18E-76A0-37E6-9612-2C901F789E41]@0xf fffff7f8c6c5000
BSD process name corresponding to current thread: MIDIServer
Boot args: kext-dev-mode=1
Mac OS version:
14C1510
I'm lucky not getting any during my performances. I think, some time I'll sell it to a Windows user, since it should work better on that system.

Similar Messages

  • M Audio firewire solo with yosemite - 'The previously selected audio interface is not available'.

    Hi, I recently bought a new mac mini with yosemite OS. I plugged in my M-audio firewire solo and (after a bit of trouble) finally managed to see it appear in GB. then moments later a dialogue box appears with 'The previously selected audio interface is not available'.
    There doesn't appear to be any update drivers from M-Audio and the CD that came with the interface also does not work?
    I can't find any information with this problem. Can any one help?

    Oops. . . A loose lead connection may have been the problem, although still not receiving a signal?

  • My midi/audio interface Edirol PCR 1  won't work with Yosemite and Roland have no driver update. Is this the end of the line for this device.

    My midi/audio interface ( Edirol PCR1) will not interface with Yosemite 10.10 and Roland have no driver update, is there any fix for the problem or is the end of the line for this device.

    Same problem here, what a shame as this has been my favorite portable keyboard for ages. Whenever I see one in a store(very rarely) I'll grab it.

  • I recently upgrade to OS X Yosemite. Now, My M_Audio Blackbox audio interface won't work. Any suggestions?

    Recently I upgraded my OS to Yosemite 10.10.2 from Mavericks. Now, my M-Audio Black Box Audio interface won't work and I can't find it in the Logic Pro 9 software. Can someone suggest a fix? Thanks.

    Do a backup, preferably 2 separate ones on 2 separate drives.
    Revert to a Previous OS X - Yosemite
    Revert Yosemite to Mavericks
    If you do revert, I'd use Setup Assistant to restore your data. This process takes a while, so do it when you won't need the computer for several hours, based on my experience.
    If you don't have a Time Machine backup, you will need a backup of some kind.

  • I've just installed Mac osx lion and my mac doesn't recognize (don't see) my audio interface. Focusrite Saffire pro 24 dsp.

    I've just installed Mac osx lion and my mac doesn't recognize (don't see) my audio interface. Focusrite Saffire pro 24 dsp.
    I had no problems on snow leopard.
    thanks

    Well I found my answer…
    http://www.focusrite.com/answerbase/en/article.php?id=1159
    At the time of writing, the following products arecurrently not working with OS X 10.7:
    Saffire PRO 14
    Saffire PRO 24
    Saffire PRO 24 DSP
    Saffire PRO 40
    Liquid Saffire 56
    Liquid Mix HD
    Forté Suite
    Scarlett Plug-In Suite
    Focusrite is committed to providing support for ourproducts with the latest operating systems. We are currently working onproviding full support for our products with OS X Lion, and these will beavailable as soon as they are complete.
    Please check this page regularly for the most up to dateinformation regarding OS X 10.7 Lion compatibility information.

  • How do I get Logic Pro X to see my USB audio interface Steinberg UR22? It saw it once before but now it doesn't.

    How do I get Logic Pro X to see my USB audio interface Steinberg UR22? It saw it once before but now it doesn't. In preferences it doesn't appear as an input device option. Help!

    First, go to System Preferences for OS X and verify that the operating system can see it.

  • Logic Pro X - How do I record my voice over existing tracks (via a mike and audio interface) without hearing those tracks on the speaker. I have headphones plugged into the interface but it doesn't stop in coming out of the speakers?

    I'm new to Logic Pro X and can't work out how to record my voice over existing tracks without them playing over the speaker. I'm using a Sure mike through an audio interface and have headphones plugged into the interface?

    Hi Kevin, what kind of audio interface do you have?

  • IChat AV doesn't work with M-Audio Firewire audio interface

    I saw similar topics to this but none dealing with a Firewire audio interface and none with exactly the same problem.
    Every other piece of software I use works with the M-Audio Firewire Solo, except for iChat AV. When it is the selected output device and I start a video chat with someone, I get just horrible, loud static when the person on the other end speaks.
    Running 10.4.10 on a Macbook Pro (2.16 GHz Intel Core 2 Duo).
    Does anyone know of incompatibility issues with iChat and Firewire interfaces?

    In Audio MIDI Setup (In applications/Utilities) the setting for my Mic is 44100khz 1Ch 16bit.
    The Internal Audio connection also shows up at 44100Khz 2Ch 16bit
    Are you looking in the same place or in the device itself ?
    I would set it in the Audio MIDI Setup and then make sure it responds in System Preferences > Sound > Input tab.
    Once the Blue bar moves to at least halfway there I would then check iChat > Preferences > Video Section to see if the green bar under the Vido pics is moving.
    4:25 PM Friday; September 7, 2007

  • Macbook Pro doesn't recognize audio interface

    Since Maverick, I have to re-initiate my Mac every time I connect my audio interface (Focusrite Saffire Pro40). The Focusrite control program recognized it, but it is not present as an option in the sound preference. Thanks for the help. Regards,
    Martin

    Go to Utilities > open Audio Midi Setup.
    Then find your Firestudio in the list & right click on it - and select Use this device for sound output. And if you want it to handle your inputs also you should select that as well.
    I would also try unplugging everything & restarting. Then just plug in your audio interface & see if it starts working.

  • Question for music producers ! MacBook Pro and my audio interface from Virus Ti doesn't seem to work properly after I updated 10.9.4 Mavericks

    Hello
    Few days ago I upgraded my Macbook Pro to 10.9.4  Mavericks And I’m using the sound card from the Virus Ti for all audio in/out and when I’m not producing music , I usually close my Logic and I use the Virus Ti as a sound card for listening to Soundcloud or iTunes on my Mac and the audio usually come out of my studio monitors , but right now even when everything is connected , the sounds from the web site is coming out from my Macbook speaker instead of my studio monitors ? and I already checked the “Output/Input” in preference and is already say Access Virus Ti and  I already repair disc too ! ,
    Right now when I’m using Logic to produced with Virus sound card everything is working fine and the audio is coming out of my monitors but as soon as I turn off Logic to use Youtube or other web site, the audio automatic switch back to laptop speakers ?
    If anyone had this problems with their audio interface and OS 10.9.4 , please advise !
    Your help is much appreciated : )

    @michelle929 don't feel so bad, i too which i never would have upgrade to ff4, OMG, so piss., worse is they deleted the old version from my computer, how dare them..lol... but most of the thing i use now don't wanna work.. i want my 3.6.15 well i think that was the last one i had.. piss piss,,and Michelle your not whining , just stating the fact's.. give me back the old version Mozilla... can't even find it on here,, any one knows where i can find it... if not gonna have to go to a server an get it,,
    thanks Lotta firefox. great job, not tell us first hand what won't work....:(

  • I'm having an intermittent problem with my midi controllers triggering Mainstage 3. I'm using a PreSonus Firebox audio interface. It's been working fine for months, but now when I first turn on the computer in the morning , I'm not able to trigger Ma

    I’m having an intermittent problem with my midi controllers triggering Mainstage 3.
    I’m using a PreSonus Firebox audio interface.
    It’s been working fine for months, but now when I first turn on the computer in the morning , I’m not able to trigger MainStage from the keyboard.  I tried different midi controllers, different keyboards, different midi cords, and check midi preferences.  The audio interface is working fine and is recogonized, but the midi doesn’twork.  I re-started the computer several times and then finally it miraculously starts working again.
      I’ve been having to this every day now.  Any help or ideas is very much appreciated.

    I Had the same problem with a FireStudio. Try unplugging the FireWire plug and the power plug. Wait for a few seconds, then plug both back in. The light on my FireStudio was flashing blue/red which means "not connecting." I did what I just described, and everything works again. Hope it works for you.

  • Emagic emi 26 audio interface not working

    I want to turn my old dell inspiron 8100 PIII 1.2 Ghz / 512 MB RAM into my sound center, attached to active loudspeakers and a huge USB external harddrive.
    Running arch linux and recently did pacman -Suy.
    The internal sound card is broken, I only get distorted sounds (in windows as well).
    I want to use my a bit dated emagic emi 26 usb audio interface.
    The linux installations has (the exact paths are maybe different, writing from another machine now):
    /lib/modules/2.6.27-9-generic/kernel/drivers/usb/misc/emi26.ko
    /lib/firmware/emi26
    So it seems the interface is supported.
    However, when I plug it in, nothing happens. Some LEDs light up on the interface,
    but /proc/asound/cards only shows my Maestro3 sound card, also alsamixer
    doesn't see the device.
    If I enter "lsusb", the terminal hangs, no Ctrl-C helps! I can't even kill -9 it as root!
    I have snd_usb_audio and emi26 in my MODULES in rc.conf, while having
    !audio and !usb_midi there too.
    lsmod shows that emi26 is loaded, as well as snd_usb_audio.
    Does anybody have an idea on how to go about this?
    I guess there must be some problem with the driver...
    Thanks for any help

    Hello,
    "and now I cannot get sound out of my interface, even after trying to unistall that program and reinstall my interface driver"
    Try using AppZapper: http://www.apple.com/downloads/macosx/systemdiskutilities/appzapper.html
    This way you make sure you have UNinstalled all the associated files.
    Carolyn

  • My iPad Air 2 is no longer recognizing my audio interface when I connect.

    Basically I am using the camera connection kit to connect to my korg kronos keyboard, which has an audio interface. The couple times that I did this before, it worked. Sound from the iPad was routed to my monitor via the Kronos interface. I don't know what happened but I didn't use it for a week and ever since then when I connect the sound only comes through my iPad. I used to be able to use the Kronos As midi device to control my music apps but even that functionality doesn't work anymore.
    ive tried doing a hard reset several times and in several combinations with the Kronos...such as powering both on at the same time but no luck.
    the kronos works perfectly when I connect it to my laptop, so I'm convinced it's an issue with the iPad. When I plug the iPad to my computer it is recognized...so it can't be the connection port that is faulty.
    THe kronos is the only class compliant device I have to test it on and have been unlucky so far.
    ANy help?

    Try doing a hard reset on the iPad. You can also check if your iPad needs to be updated too.
    To update go to Settings - General - Software Update
    To do a hard reset, i would suggest you do a back up first, either on iCloud or via iTunes.
    First try shutting down the device off and on, if that does not help, then you can go ahead and do the hard reset.
    Hard Resetting your device.
    On your iPad, press and hold both the SLEEP/WAKE button and the HOME button for about ten (10) seconds. After ten seconds you should see the Apple logo showing up, you can then release your fingers from those buttons. Wait for your iPad to turn up completely, then try connecting your projector again to see if it works. I hope it does. Please let me know if you need any further assistance.

  • Which Audio Interface for Me?

    Okay, I have decided to make the switch from my iMic and a mixer to an audio interface that has two inputs so I can record two channels at once. I may be using external pre's at times so it must have line-in's. Also, right now I am using a Rev. A Mac Mini, but soon I will be upgrading to a Mac Intel Book to be named later. I will mainly use this to record acoustic guitar, vocals, bass, and ocassionally drums (using a mixer to sub mix and then into the audio interface). I will do everything for my own home enjoyment so my standards are real high. Here are the possibilities I have come up with from the Sweetwater catalog in my price range ($150 - $300):
    1.)Lexicon Alpha (this is a new model) or Lambda - both are USB
    2.)Tapco Link.USB
    3.)Makie Spike (USB)
    4.)Alesis io I 14 (what is this thing USB or Firewire?)
    5.)M-Audio Firewire 410
    6.)Presonus Firebox
    It doesn't matter to me if it is USB or Firewire, I guess my biggest requirement is the ability to use the line-in for external pre's. Thanks for any help!

    I guess you guys mean that I could pan channel one
    left and two right and then into the iMic?
    That's correct
    There are two jacks on the iMic I see,
    No, one of those is the input, one of those is the output (you could plug headphoines into that one)
    but I guess I don't
    understand how I can have those on two seperate
    channels in garageband.
    That's the easy part. Create a New Basic Track and click the "I"nfo button, then set the input popUp menu to "Channel 1 (Mono)". Create a second New Basic Track and set it's Input popUp menu to "Channel 2 (mono)". Make sure the little red Record Enable buttons are on for both track and hit record. You'll be recording 2 tracks.
    Also, I think one thing for
    me as that my mixer didn't have in/outs on each
    channel so I can use external pre's.
    Okay, like I said, I would never dissuade someone from getting a better interface, and the iMic is nowhere near the Top Of The Line...
    I use PreSonus' FirePod and for the year+ that I've had it I've been thrilled with it. I have no person al experience with the FireBox, but PreSonus has an excellent reputation so if it has the features you want, I'd expect it to be a great product.
    Finally, I guess I should say that I'm using
    Garageband now, but had thought about Logic Express
    in the future. Thanks for the help
    Any of the interfaces you listed should work fine with whatever software you want to use (the compatibility question is not really with the software, but rather the hardware. If the interface works on your Mac then it will work with GB and Logic).
    Hope that helps --HangTime [Will Compute for Food] B-|>

  • M-Box audio interface problem

    My M-box audio interface does not show up in the audio in/out preferences for my audio applications. I have to boot up the computer while it is plugged in (via USB) in order for it to show up and function. I have tested the USB cable and other USB devices work in both ports, ruling out a problem with USB ports. Any idea?
    Thank you

    bbbberny wrote:
    I can't get it to work with itunes, or any program that outputs sound
    For that to happen you also have to open the Sound panel in *System Preferences* and designate your Tascam as the output (and input-) device.
    On the 'audio midi setup' in utilities (under applications in finder), it has the device listed, but doesn't necessarily say it is connected...
    If it isn't connected, it won't show up in AMS. so if it shows up, it's connected.
    The device comes with its own application called 'FW-1804 manager', which does detect it when it is connected and on. A little green light appears on this program to show that audio is enabled.
    Have you investigated that Program thoroughly?
    The device has 12 outputs, 8 of which are adat, 2 spdif, then the 2 main analogue outputs. It doesn't say which is which in the list of outputs within 'audio midi setup', it just numbers them 1 to 12.
    Here your Tascam manual should shed light on what is what. Or you may have to assign those in the control software.
    The levels by each output slider are all set to 0 and are greyed out and unchangeable, whereas when the output is set to 'built in output', the faders are available to adjust.
    Yes, those only appear with built in audio - that's normal. You have to set the sliders in the control program.
    Does this mean that the output routing is incorrectly set up, or something along those lines? I'm pretty sure it should work, it says it is leopard and intel mac compliant.
    Yes, probably.
    And it does still work with the PC, leading me to believe i just need to change some settings?
    Yep.
    Could it be anything to do with the fact that it is a FW-400 device, with a 6 pin connection, and I am using a 6 - 9 pin cable to connect it to the FW-800 bus on the mac?
    No. If the cable was faulty, it would not have shown up in the AMS utility.

Maybe you are looking for