Yosemite install fails: "not enough free space in the Core Storage Logical Volume Group for this operation"
This is on a Mac Mini, running Mavericks, with a fusion drive (1TB/128GB), and 85GB free space.
Any ideas?
I too experienced the Low Disk space event… I hit the restart button and the install started again… I thought I got caught in a loop.
On the third time seeing the crawl bar for the Yosemite install I hit the Power Button and force killed the whole process.
Upon rebooting I saw horizontal black and white bars across the screen and VERY Slow everything.
Boot, Icon Bounce, Application Launch, Keyboard response… etc.
I was able to get to the Desktop and then I re-installed Yosemite. Dragging a window was laggy, and jerky…
On the third install of Yosemite things improved some, almost but not quite as fast as Mavericks … Some improvement but copy/writes remained very slow.
I now notice that some Applications such as “Clean My Mac” fail to launch and am still finding out if all are functional.
I have a home rolled Fusion Drive.
Currently I am considering a Clean Yosemite install and a TM restore.
Console and Activity Monitor report callservicesd and Chromehelper among others not responding…
I am on hold for the last ten minutes to Apple Support... They must be VERY busy today...
Similar Messages
-
We're doing nightly BMR backups of a small 2012 R2 Hyper-V host via wbadmin to 2TB USB disks, via
wbadmin start backup -backupTarget:z: -quiet -noverify -vssFull -include:e:,c: -allCritical
(where E: contains the sole VM).
We are using the same backup system on other similar Hyper-V hosts running 2008 R2 and 2012, with no problems. However, with this 2012 R2 host, after a few months of no problems the backups started failing with:
There is not enough free space on the backup storage location to back up the data.
This made no sense, and continues to make no sense:
The 2TB backup disks are only half full (>1TB free), with 600GB of unallocated shadowstorage.
There should be room for many more backups on these disks. Each currently contains 11 to 13 backups, with the initial full backup having required about 600GB and each subsequent backup only requiring another 20GB to 40GB.
There is over 40GB free on the C: drive and 300GB free on the E: drive; free space on the host volumes is not an issue.
Increasing the shadowstorage limit on the backup disks to unbounded doesn't resolve the issue.
This is not a problem of a RECOVERY partition that's too small, and SystemState backups always complete successfully.
The first workaround we found was to temporarily reduce (not increase) the shadowstorage allocation on the E: drive (containing the VM) and then increase it back (with the end result of deleting old shadow copies).
This worked reliably, but looking for a root cause led us to uninstall the Windows Updates installed mid-September (in particular the Aug 2014 and Sep 2014 roll-ups), which preceded the start of this problem. But instead of resolving the problem the uninstalls
made it worse, in that our workaround stopped working.
We reinstalled the Windows Updates, and then tried setting backup performance to normal, in case the problem was related to VSS on the host volumes, but the errors continued.
At this point the only way we've found to work around the error is to delete 1 or 2 of the oldest backups on the destination disk, via
wbadmin delete backup -backupTarget:z: -deleteOldest
after which the new backup will succeed.
But, again, this makes no sense, as the destination disks are only half full, and even if space was an issue wbadmin should delete old backups as required. And this same system is working fine on 2008 R2 and 2012.
Any suggestions?
Thanks,
JohnHi John,
Please check run the command below to check if the space required to complete the backup causes the snapshot storage space to become less than 1/8 of the target size.
vssadmin list shadows /for=x: will list the shadow copies on x: and creation time.
WSB will not shrink the diff area to less than 1/8 of Target volume size as we do not want to lose all past backups just to accommodate this one.
For more detailed information, please refer to the article below:
Windows Server Backup automatic disk usage management
http://blogs.technet.com/b/filecab/archive/2011/03/14/windows-server-backup-automatic-disk-usage-management.aspx
V. Backup, Restore and Disaster Recovery
http://social.technet.microsoft.com/wiki/contents/articles/1846.v-backup-restore-and-disaster-recovery.aspx?Sort=MostUseful&PageIndex=1
Best Regards,
Mandy
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place. -
Service Partition - Rescue and Recovery installation fails (not enough free space)
Im am aware about former posts to this subject on this forum, but they didn't answer all my questions, so I reopened the subject.
I tried to install "Rescue and Recovery" on T60 with win XP Pro and got the following message:
'There is not enough free space in the boot sector to install the Rescue and Recovery boot manager'
I followed the solution in "Rescue and Recovery installation fails") from 08-09-2008 03:03 AM
and created a hidden partition with Parted Magic but the rescue and recovery still fails with the same message.
Somewhere in the forum I read that the original service partition has a special format and not ntfs.
Could somebody tell me is it true or not ?
How can I rebuild this service partition ?
Do I need special setting, flags there ?
Is it possible to rebuild this partition without recovery CDs at all ?
Actually I'm wondering to, about the error message. It is saying '"..There is not enough free space in the boot sector ..." .
Is it possible that the boot sector is the problem and not the service partition ?
How can I fix that ?
Thanks in advance if somebody helps.I have a 4-year-old ThinkPad R51. Because I was getting intermittent boot-up error messages--"Rescue and Recovery has encountered a problem and needs to close"--with ver. 4.0, I tried to upgrade to ver. 4.2. Per instructions, I first removed ver. 4.0 using Windows Control Panel. Then each attempt to install 4.2 failed with the message: "Error 25025. There is not enough free space on the computer to install or upgrade the Rescue and Recovery environment." Just before that error message popped up in center-screen, I got a Windows message at lower right saying "You are running out of space on SERVICEV001 (Z:}" Of course, there was no way I could view partition Z (that I knew of).
Thanks to the helpful messages above, I downloaded Parted Magic (http://partedmagic.com), burned a boot CD per its instructions, and re-booted with that CD. Using GParted, I saw that my SERVICEV001 partition was merely 590 MB, and 587 MB was in use. So I reduced my C partition by 500 MB and added 500 MB to the Z partition, raising it to 1090 MB. Then I was able to re-boot into Windows and the installation of Rescue and Recovery 4.2 was error-free.
Out of curiosity, I again re-booted with the Parted Magic CD to see how much space on the Z partition was taken by the RnR ver. 4.2 installation. To my surprise, it showed that still only 587 MB was in use, and 503 MB remained unused.
I thank those in this forum whose messages gave me the needed guidance. And I thanked the author of Parted Magic with a $10 donation, as I hope other users of his open source program will do.
Message Edited by DougSchafer on 08-08-2008 06:06 PM
Message Edited by DougSchafer on 08-08-2008 06:12 PM -
I can no longer import photos from my PC because I get this message: iPhoto cannot import your photos because there is not enough free space on the volume containing your iPhoto library. How can I fix this problem?
Option 1
Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Rebuild iPhoto Library Database from automatic backup.
If that fails:
Option 2
Download iPhoto Library Manager and use its rebuild function. This will create a new library based on data in the albumdata.xml file. Not everything will be brought over - no slideshows, books or calendars, for instance - but it should get all your albums and keywords back.
Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one. .
Regards
TD -
I have IPhoto version 9.5.1. I cannot export pictures since the following message appears: "iPhoto cannot import your photos because there is not enough free space on the volume containing your iPhoto library." What am I suppose to do? I have a Mac mini which properly used can perform any reasonable task, the problem is I do not know what to do.
Any help will be appreciated.Hmm... that was labelled:
As a Test:
In bold and all
Try repair the main Library:
Option 1
Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Repair Database. If that doesn't help, then try again, this time using Rebuild Database.
If that fails:
Option 2
Download iPhoto Library Manager and use its rebuild function. (In early versions of Library Manager it's the File -> Rebuild command. In later versions it's under the Library menu.)
This will create an entirely new library. It will then copy (or try to) your photos and all the associated metadata and versions to this new Library, and arrange it as close as it can to what you had in the damaged Library. It does this based on information it finds in the iPhoto sharing mechanism - but that means that things not shared won't be there, so no slideshows, books or calendars, for instance - but it should get all your events, albums and keywords, faces and places back.
Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one.
Regards
TD -
Mac Pro Book
Mac OS X 10.7.5
iPhoto 11 9.4.2
importing photos into iphoto, shows "Photo cannot import your photos because there is not enough free space on the volume containing your iPhoto library."
tried creat new library, same thing.
currently only has 2,500 photos in iPhoto
Importing about 500 photos, but cant do it due to the message showed above.
Who knows how to fix it?How much free space do you have on your hard drive? Try the following:
1 - delete the iPhoto preference file, com.apple.iPhoto.plist, that resides in your
User/Home/Library/ Preferences folder.
2 - delete iPhoto's cache file, Cache.db, that is located in your
User/Home/Library/Caches/com.apple.iPhoto folder (Snow Leopard and Earlier).
or with Mt. Lion from the User/Library/Containers/com.apple.iPhoto/
Data/Library/Caches/com.apple.iPhoto folder
3 - launch iPhoto and try again.
NOTE: If you're moved your library from its default location in your Home/Pictures folder you will have to point iPhoto to its new location when you next open iPhoto by holding down the Option key when launching iPhoto. You'll also have to reset the iPhoto's various preferences.
NOTE 2: In Lion and Mountain Lion the Library folder is now invisible. To make it permanently visible enter the following in the Terminal application window: chflags nohidden ~/Library and hit the Enter button - 10.7: Un-hide the User Library folder. -
I keep getting the following error message despite only having about 4000 pics in my iphotos; iPhoto cannot import your photos because there is not enough free space on the volume containing your iPhoto library. I have tried moving my iphotos library to an external Hard Drive and starting a new library but still it will not allow any more to be loaded.
What version of iPhoto?
try Back up your iPhoto library, Depress and hold the option (alt) and command keys and launch iPhoto - rebuild your iPhoto library database
LN -
iPhoto cannot import your photos because there is not enough free space on the volume containing your iPhoto library. I have .999.35 T left. 3.18 gigs used in photo storage. How do I fix this?
iphoto insufficient disk space
iphoto insufficient disk space on volume -
I get the message 'your startup disc us full' at random time points. I'm trying to import photos to iPhoto and get'iPhoto cannot import your photos because there is not enough free space on the volume containing your iPhoto library'. This is a new Macbook Pro and all my files were transferred from my old Macbook.
What size internal drive do you have and how much of it is used?
-
I cannot import my pictures and movies from a DVD - What does this mean when I get a computer message on my Mac -
"I photo cannot import your photos because there is not enough free space on the volume containing your I photo library"It means pretty much what it says - your HD is full.
This can arise because your HD is full - how big is your HD? How much free space on it?
Or it can be a mis-report due to to other issues.
Regards
TD -
I cant sync my ipad because I get a message that says 'not enough free space' but the more I delete, the less space I have. Does anyone else have this issue?
http://support.apple.com/kb/TS1503
http://www.apple.com/support/ipad/syncing/ -
***There is not enough free space on the untitled disk***
I am attempting to install PrintShop software and need approx. 1150MB for it to be installed. My computer says that I have a 256GB solid state SATA. It has 105.33GB free out of 159.18GB. I don't have any idea of how to fix this. I emptied my trash and got rid of many files that weren't being used any longer. Could someone tell me what info they need from me about my laptop in order to help me?
I know that this is not a new topic, but I couldn't find an answer in past discussions that fit my situation. Thanks so much.I did the repair permissions in disk utility and I have done repair disk previously. After both quit running, I restart my computer (I'm not sure if that is what needs done). But neither of the disk utility actions have helped.
I also went in and looked at the partition. I think I messed that up. In the partition space, it only showed my Untitled partition. I took the cursor and used it to drag and enlarge the partition so that the Untitled had the full space. I've never used the partition before and I don't run Windows or anything like that so I don't think I have a need for more than one partition, do I?
My Untitled drive now shows that there is tons of free space, but I am still getting a "not enough free space" message.
Also, in Finder, I see Favorites with Apps, documents, downloads, music, etc and I see devices that lists my PrintShop CD, but I don't see my drive listed any longer. Do you know what I might have done? -
There is enough spacde on my phone. It is the exact same itunes library because i saved all my music before i reinstalled windows. So i just put all the music back onto itunes. It asked me if i wanted to erase and sync because it was a "new computer" and i said yes because it is all the same music so it should just re sync all the same stuff. But it wont do it. It just keeps saying there is not enough space on the phone, and my phone has 5 GB left on it.
Maybe iTunes is calculating it like this:
5 GB left, but if you sync your music (from the new PC) to it it will be full. It's maybe syncing the new content and then deleting the old music.
Try this: Deselect "Music-Syncing" and let him delete the music from your iPhone. (the other stuff, photos, cal, contacts should stay untoucht if you don't deselect it) After iTunes deleted the music from your iPhone (by letting the other stuff untouched) try to reselect "Music-Syncing" and iTunes will sync your music to your iPhone. -
Does this mean I cannot import from CD,or am I doing something wrong,.
Only bought Mac last April?As a Test:
Hold down the option (or alt) key and launch iPhoto. From the resulting menu select 'Create Library'
Import a few pics into this new, blank library. Is the Problem repeated there? -
FileVault Failed: Unable to create a new Core Storage logical volume group.
So when I try to enable FileVault on my Retina MBP, I go through all the steps and hit restart.
The program then hangs for about 30 seconds and gives me the above error.
It never restarts and never turns on FileVault.
Any ideas?Triple-click anywhere in the line below to select it:
diskutil list; echo; diskutil cs list
Copy the selected text to the Clipboard (command-C).
Launch the Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Paste (command-V) into the Terminal window.
Post any lines of output that appear below what you entered — the text, please, not a screenshot.
Maybe you are looking for
-
Is there any function module for purchase order change
Hi Experts, Is there any function module for purchase order change or i need to do new recording in me22n. Thanks, Senthil
-
When is Apple going to fix freezing problem in phone
Why is it taking so long to fix the bug where the screen freezes when trying to delete voice mail calls. Also voice mail is never working
-
I bought my ibook G4 from HK on March 06.There is a quiet big bright spot (about 1mm might be gather more than 5-6pix already .) apear on left side screen.I check my applecare still have 321 days warranty.. I live in GuangZhou where is the Apple Serv
-
NetBeans 6.0 for Websphere 5.1.2
Did anyone have any idea of how could i integrate the Netbeans 6.0 to use the Websphere 5.1.2 application server for the development? As i originally using the Websphere application studio 5.1.2 to develop the enterprise application and i decided to
-
Jump on breakpoint after a specific number of loop passes
Hello, I want that the debugger in teststand 3.1 jumps on the breakpoint in a while loop after a specific number of passes. how can I configure teststand, that this is possible? regards samuel