Yosemite made everything slow?
I just now updated my Mac to Yosemite, since it had been running really sluggishly and I wanted to make sure I had all of the most recent updates to stop all that.
But when I open up my flash project files, something's weird. It's like they're all running a little slow, like it's struggling to play them at the perfect (normal) speed.
Can anybody help me? I've put a lot of time in to this stuff and now it all looks messed up. : (
I'm sorry for not being as detailed as I should have been! Only the playback runs slow, and it's only when I play the timeline and watch the stage. Previewing the movie or the scene works just fine.
I haven't noticed any tools running slow. It's a really weird issue, and very specific - a slightly slower playback when I'm playing it in the timeline. But as any animator knows, even a slightly slower playback can be catastrophic to a piece!
Similar Messages
-
Yosemite made my MacBook Pro so slow !! Need help ? what is the solution?
Yosemite made my MacBook Pro so slow !! Need help ? what is the solution?
I've ran a benchmark on my Mac (iMac early 2009). Performance of Yosemite in general was about the same as Mavericks. But that can be different on other Mac's of course. Safari is mostly a bit slower. It's recommended you clean your old internet-caches and then restart Safari. (you can use a little app called CCleaner to do that). That might make a difference. Speed-issues are usually solved in the first and second update of OS X.
-
Yosemite made my MacBook Pro so slow. Need help.
I Upgraded my MBP (2012), from Mavericks to Yosemite and it slowed my computer down to the point where it became unusable. I repaired the permissions, and even reinstalled Yosemite but it didn't help. My MBP is crawling and I'm hoping someone can walk me through a solution. Need help.
SIgned,
YoseMighty SlowProblem description:
MacBook Pro (mid 2012) is running super slow since I upgraded to Yosemite. Used CleanMyMac2 and freed up 22G. Verified and repaired disk permissions. Re-installed Yosemite and still, it is running dead slow. Windows take between 45-60 seconds to open, files are slow to appear…generally just slow and unresponsive.
EtreCheck version: 2.0.6 (91)
Report generated October 19, 2014 at 8:42:19 PM EDT
Hardware Information: ℹ️
MacBook Pro (13-inch, Mid 2012) (Verified)
MacBook Pro - model: MacBookPro9,2
1 2.5 GHz Intel Core i5 CPU: 2-core
8 GB RAM Upgradeable
BANK 0/DIMM0
4 GB DDR3 1600 MHz ok
BANK 1/DIMM0
4 GB DDR3 1600 MHz ok
Bluetooth: Good - Handoff/Airdrop2 supported
Wireless: en1: 802.11 a/b/g/n
Video Information: ℹ️
Intel HD Graphics 4000 -
Color LCD 1280 x 800
System Software: ℹ️
OS X 10.10 (14A389) - Uptime: 0:55:38
Disk Information: ℹ️
APPLE HDD TOSHIBA MK7559GSXF disk0 : (750.16 GB)
S.M.A.R.T. Status: Verified
EFI (disk0s1) <not mounted> : 210 MB
Recovery HD (disk0s3) <not mounted> [Recovery]: 650 MB
Macintosh HD (disk1) / [Startup]: 748.93 GB (574.29 GB free)
Encrypted AES-XTS UnlockedConverting
Core Storage: disk0s2 749.30 GB Online
MATSHITADVD-R UJ-8A8
USB Information: ℹ️
Apple Inc. FaceTime HD Camera (Built-in)
Apple Computer, Inc. IR Receiver
Apple Inc. Apple Internal Keyboard / Trackpad
Apple Inc. BRCM20702 Hub
Apple Inc. Bluetooth USB Host Controller
Thunderbolt Information: ℹ️
Apple Inc. thunderbolt_bus
Gatekeeper: ℹ️
Mac App Store and identified developers
Kernel Extensions: ℹ️
/System/Library/Extensions
[not loaded] com.leapfrog.codeless.kext (2) Support
[not loaded] com.leapfrog.driver.LfConnectDriver (1.9.8 - SDK 10.8) Support
[not loaded] com.sony.driver.dsccamFirmwareUpdaterType00 (1 - SDK 10.6) Support
Startup Items: ℹ️
ChmodBPF: Path: /Library/StartupItems/ChmodBPF
Startup items are obsolete and will not work in future versions of OS X
Problem System Launch Agents: ℹ️
[invalid?] com.VTech.AgentMonitor.plist Support
Launch Agents: ℹ️
[loaded] com.oracle.java.Java-Updater.plist Support
[running] com.sony.SonyAutoLauncher.agent.plist Support
[invalid?] com.support.com.peruser.Nexusd.plist Support
[invalid?] com.support.com.peruser.Nexussrvd.plist Support
Launch Daemons: ℹ️
[loaded] com.adobe.fpsaud.plist Support
[loaded] com.leapfrog.connect.authdaemon.plist Support
[loaded] com.macpaw.CleanMyMac2.Agent.plist Support
[loaded] com.oracle.java.Helper-Tool.plist Support
[loaded] com.oracle.java.JavaUpdateHelper.plist Support
User Launch Agents: ℹ️
[loaded] com.google.keystone.agent.plist Support
[running] com.leapfrog.connect.monitor.plist Support
[loaded] com.macpaw.CleanMyMac2Helper.diskSpaceWatcher.plist Support
[loaded] com.macpaw.CleanMyMac2Helper.scheduledScan.plist Support
[loaded] com.macpaw.CleanMyMac2Helper.trashWatcher.plist Support
[invalid?] com.support.com.peruser.Nexusd.plist Support
[invalid?] com.support.com.peruser.Nexussrvd.plist Support
User Login Items: ℹ️
iTunesHelper Application (/Applications/iTunes.app/Contents/MacOS/iTunesHelper.app)
Dropbox Application (/Applications/Dropbox.app)
Internet Plug-ins: ℹ️
SAFARIMontageInfo: Version: (null) - SDK 10.2 Support
FlashPlayer-10.6: Version: 15.0.0.152 - SDK 10.6 Support
QuickTime Plugin: Version: 7.7.3
Flash Player: Version: 15.0.0.152 - SDK 10.6 Mismatch! Adobe recommends 15.0.0.189
SAFARIMontageConnectPlugInNS: Version: (null) - SDK 10.2 Support
Default Browser: Version: 600 - SDK 10.10
SAFARIMontagePlayer: Version: (null) - SDK 10.8 Support
Silverlight: Version: 5.1.10411.0 - SDK 10.6 Support
JavaAppletPlugin: Version: Java 7 Update 67 Check version
User Internet Plug-ins: ℹ️
WebEx64: Version: 1.0 - SDK 10.6 Support
Google Earth Web Plug-in: Version: 7.1 Support
Safari Extensions: ℹ️
AdBlock
Add To Amazon Wish List
Open-Dyslexic (Disabled)
Print Plus
Evernote Web Clipper
iShorten
3rd Party Preference Panes: ℹ️
AppTrap Support
Flash Player Support
Java Support
Time Machine: ℹ️
Mobile backups: OFF
Auto backup: NO - Auto backup turned off
Destinations:
My Passport for Mac [Local]
Total size: 0 B
Total number of backups: 0
Oldest backup: -
Last backup: -
Size of backup disk: Excellent
Backup size 0 B > (Disk size 0 B X 3)
Top Processes by CPU: ℹ️
8% QuickLookSatellite
8% installer
7% WindowServer
4% Install Adobe Flash Player
3% com.hp.devicemonitor
Top Processes by Memory: ℹ️
155 MB softwareupdated
146 MB Finder
94 MB mds_stores
86 MB Dropbox
86 MB QuickLookSatellite
Virtual Memory Information: ℹ️
2.39 GB Free RAM
4.10 GB Active RAM
1.14 GB Inactive RAM
963 MB Wired RAM
1.91 GB Page-ins
0 B Page-outs -
Yosemite running extremely slow
Yosemite running extremely slow on Macbook pro since I have updated. Please lend a hand if possible. Thanks!
EtreCheck version: 2.1.5 (108)
Report generated December 29, 2014 at 10:50:43 AM EST
Click the [Support] links for help with non-Apple products.
Click the [Details] links for more information about that line.
Click the [Adware] links for help removing adware.
Hardware Information: ℹ️
MacBook Pro (15-inch, Early 2011) (Verified)
MacBook Pro - model: MacBookPro8,2
1 2.2 GHz Intel Core i7 CPU: 4-core
4 GB RAM Upgradeable
BANK 0/DIMM0
2 GB DDR3 1333 MHz ok
BANK 1/DIMM0
2 GB DDR3 1333 MHz ok
Bluetooth: Old - Handoff/Airdrop2 not supported
Wireless: en1: 802.11 a/b/g/n
Video Information: ℹ️
Intel HD Graphics 3000 - VRAM: 384 MB
Color LCD 1440 x 900
AMD Radeon HD 6750M - VRAM: 1024 MB
System Software: ℹ️
OS X 10.10.1 (14B25) - Uptime: one day 22:28:46
Disk Information: ℹ️
TOSHIBA MK7559GSXF disk0 : (750.16 GB)
EFI (disk0s1) <not mounted> : 210 MB
Recovery HD (disk0s3) <not mounted> [Recovery]: 650 MB
Macintosh HD (disk1) / : 748.93 GB (434.21 GB free)
Core Storage: disk0s2 749.30 GB Online
MATSHITADVD-R UJ-898
USB Information: ℹ️
Apple Inc. BRCM2070 Hub
Apple Inc. Bluetooth USB Host Controller
Apple Inc. Apple Internal Keyboard / Trackpad
Apple Inc. FaceTime HD Camera (Built-in)
Apple Computer, Inc. IR Receiver
Thunderbolt Information: ℹ️
Apple Inc. thunderbolt_bus
Configuration files: ℹ️
/etc/hosts - Count: 15
Gatekeeper: ℹ️
Mac App Store and identified developers
Kernel Extensions: ℹ️
/Library/StartupItems/M-Audio PCI Audio Helper
[not loaded] com.midiman.driver.MAudioDelta (2.0.8) [Support]
[not loaded] com.midiman.driver.MAudioDeltaHT (2.0.8) [Support]
/System/Library/Extensions
[not loaded] at.obdev.nke.LittleSnitch (2.5.3) [Support]
[not loaded] com.avid.usb.mboxmini.driver (1.0.5) [Support]
[loaded] com.digidesign.iokit.DigiDal (9.0.2f4) [Support]
[not loaded] com.digidesign.mbox2.boot.driver (9.0f4) [Support]
[not loaded] com.digidesign.mbox2.driver (9.0f4) [Support]
[not loaded] com.maudio.usb.prokeyssono88.driver (1.8) [Support]
[not loaded] com.novationmusic.driver.usb.audio (2.3) [Support]
[not loaded] com.numark.ns6.usb (2.1.18 - SDK 10.7) [Support]
[not loaded] com.numark.ns7.usb (2.1.18 - SDK 10.7) [Support]
[not loaded] com.numark.v7.usb (2.1.18 - SDK 10.7) [Support]
[not loaded] com.paceap.kext.pacesupport.master (5.7.2) [Support]
[not loaded] com.pctools.iantivirus.kfs (1.0.1) [Support]
[not loaded] com.ploytec.xonedx.usb (2.0.2) [Support]
[not loaded] com.seagate.driver.PowSecDriverCore (5.2.3 - SDK 10.4) [Support]
[loaded] com.silex.driver.sxuptp (1.5.1) [Support]
[not loaded] shinco.JoyeTechType00 (1 - SDK 10.0) [Support]
/System/Library/Extensions/NumarkNS6Audio.kext/Contents/PlugIns
[not loaded] com.numark.ns6.usb_TIGER (2.1.18 - SDK 10.4) [Support]
/System/Library/Extensions/NumarkNS7Audio.kext/Contents/PlugIns
[not loaded] com.numark.ns7.usb_TIGER (2.1.18 - SDK 10.4) [Support]
/System/Library/Extensions/NumarkV7Audio.kext/Contents/PlugIns
[not loaded] com.numark.V7.usb_TIGER (2.1.18 - SDK 10.4) [Support]
/System/Library/Extensions/PACESupportFamily.kext/Contents/PlugIns
[not loaded] com.paceap.kext.pacesupport.leopard (5.7.2) [Support]
[not loaded] com.paceap.kext.pacesupport.panther (5.7.2) [Support]
[loaded] com.paceap.kext.pacesupport.snowleopard (5.7.2) [Support]
[not loaded] com.paceap.kext.pacesupport.tiger (5.7.2) [Support]
/System/Library/Extensions/Seagate Storage Driver.kext/Contents/PlugIns
[not loaded] com.seagate.driver.PowSecLeafDriver_10_4 (5.2.3 - SDK 10.4) [Support]
[not loaded] com.seagate.driver.PowSecLeafDriver_10_5 (5.2.3 - SDK 10.5) [Support]
[not loaded] com.seagate.driver.SeagateDriveIcons (5.2.3 - SDK 10.4) [Support]
/System/Library/Extensions/XONE_DX.kext/Contents/PlugIns
[not loaded] com.ploytec.xonedx.usb_TIGER (2.0.2) [Support]
Startup Items: ℹ️
Digidesign Mbox 2: Path: /Library/StartupItems/Digidesign Mbox 2
DigidesignLoader: Path: /Library/StartupItems/DigidesignLoader
M-Audio PCI Audio Helper: Path: /Library/StartupItems/M-Audio PCI Audio Helper
PACESupport: Path: /Library/StartupItems/PACESupport
Startup items are obsolete in OS X Yosemite
Problem System Launch Agents: ℹ️
[killed] com.apple.CallHistoryPluginHelper.plist
[killed] com.apple.coreservices.appleid.authentication.plist
[killed] com.apple.icloud.fmfd.plist
[killed] com.apple.rcd.plist
[killed] com.apple.scopedbookmarkagent.xpc.plist
[killed] com.apple.telephonyutilities.callservicesd.plist
6 processes killed due to memory pressure
Problem System Launch Daemons: ℹ️
[killed] com.apple.ctkd.plist
[killed] com.apple.GSSCred.plist
[killed] com.apple.ifdreader.plist
[killed] com.apple.nehelper.plist
[killed] com.apple.periodic-weekly.plist
[killed] com.apple.softwareupdate_download_service.plist
[killed] com.apple.tccd.system.plist
[killed] com.apple.wdhelper.plist
8 processes killed due to memory pressure
Launch Agents: ℹ️
[invalid?] at.obdev.LittleSnitchNetworkMonitor.plist [Support]
[invalid?] at.obdev.LittleSnitchUIAgent.plist [Support]
[not loaded] com.adobe.AAM.Updater-1.0.plist [Support]
[running] com.Affinegy.InstaLANa.plist [Support]
[running] com.avid.mboxmini.helper.plist [Support]
[loaded] com.divx.dms.agent.plist [Support]
[loaded] com.divx.update.agent.plist [Support]
[running] com.sony.BloggieSoftware.AutoRun.plist [Support]
Launch Daemons: ℹ️
[invalid?] at.obdev.littlesnitchd.plist [Support]
[loaded] com.adobe.fpsaud.plist [Support]
[invalid?] com.adobe.SwitchBoard.plist [Support]
[loaded] com.microsoft.office.licensing.helper.plist [Support]
[running] com.paceap.eden.licensed.plist [Support]
[loaded] com.sonycorporation.BloggieInstallerAgent.plist [Support]
[running] hdjsd.plist [Support]
[loaded] org.firebird.gds.plist [Support]
[loaded] PACESupport.plist [Support]
User Launch Agents: ℹ️
[loaded] com.adobe.ARM.[...].plist [Support]
[failed] com.facebook.videochat.[redacted].plist [Support]
[failed] com.facebook.videochat.[redacted].plist [Support]
[loaded] com.google.keystone.agent.plist [Support]
[invalid?] com.zeobit.MacKeeper.Helper.plist [Support]
User Login Items: ℹ️
iTunesHelper UNKNOWNHidden (missing value)
GrowlHelperApp Application (/Library/PreferencePanes/Growl.prefPane/Contents/Resources/GrowlHelperApp.app)
MediaLinkHelper ApplicationHidden (/Users/richardford/Library/PreferencePanes/MediaLink.prefPane/Contents/Resourc es/MediaLinkHelper.app)
smcFanControl Application (/Users/richardford/Downloads/smcFanControl_2_3/smcFanControl.app)
Belkin Router Monitor UNKNOWN (missing value)
Music Manager UNKNOWNHidden (missing value)
Android File Transfer Agent Application (/Users/richardford/Library/Application Support/Google/Android File Transfer/Android File Transfer Agent.app)
uTorrent Application (/Applications/uTorrent.app)
iAntiVirus ApplicationHidden (/Applications/iAntiVirus/iAntiVirus.app)
Internet Plug-ins: ℹ️
OVSHelper: Version: 1.1 [Support]
Default Browser: Version: 600 - SDK 10.10
Flip4Mac WMV Plugin: Version: 2.3.8.1 [Support]
AdobePDFViewerNPAPI: Version: 10.1.8 [Support]
FlashPlayer-10.6: Version: 16.0.0.235 - SDK 10.6 [Support]
DivX Web Player: Version: 3.1.0.13 - SDK 10.5 [Support]
Silverlight: Version: 5.1.30514.0 - SDK 10.6 [Support]
Flash Player: Version: 16.0.0.235 - SDK 10.6 [Support]
QuickTime Plugin: Version: 7.7.3
iPhotoPhotocast: Version: 7.0 - SDK 10.7
SharePointBrowserPlugin: Version: 14.1.0 [Support]
AdobePDFViewer: Version: 10.1.8 [Support]
WidevineMediaOptimizer: Version: 6.0.0.12757 - SDK 10.7 [Support]
JavaAppletPlugin: Version: 15.0.0 - SDK 10.10 Check version
Audio Plug-ins: ℹ️
NumarkNS6AudioHAL: Version: Unknown - SDK 10.7 [Support]
Digidesign CoreAudio: Version: 9.0.2 [Support]
NumarkV7AudioHAL: Version: Unknown - SDK 10.7 [Support]
XONE_DX: Version: Unknown [Support]
NumarkNS7AudioHAL: Version: Unknown - SDK 10.7 [Support]
3rd Party Preference Panes: ℹ️
DigidesignMbox2 [Support]
Flash Player [Support]
Flip4Mac WMV [Support]
Growl [Support]
M-Audio Delta Family [Support]
M-Audio ProKeys Sono 88 [Support]
Mbox Mini [Support]
MediaLink [Support]
MusicManager [Support]
Paragon NTFS for Mac ® OS X [Support]
Time Machine: ℹ️
Time Machine not configured!
Top Processes by CPU: ℹ️
18% mds
7% WindowServer
1% Dock
1% loginwindow
1% ocspd
Top Processes by Memory: ℹ️
234 MB com.apple.WebKit.WebContent
168 MB Safari
52 MB WindowServer
47 MB Finder
39 MB mds_stores
Virtual Memory Information: ℹ️
861 MB Free RAM
1.31 GB Active RAM
584 MB Inactive RAM
1.29 GB Wired RAM
309.88 GB Page-ins
977 MB Page-outs
Diagnostics Information: ℹ️
Dec 27, 2014, 12:22:31 PM Self test - passed
Dec 27, 2014, 12:20:04 PM /Users/richardford/Library/Logs/DiagnosticReports/System Preferences_2014-12-27-122004_[redacted].crash0. Since you have barely enough Ram, you must be very careful about running too many apps together, and avoid everything that is not really needed, or even not compatible.
1. uninstall iAntivirus and MacKeeper completely, Counterproductive.
Uninstall also the Seagate disk software.
2. you have uTorrent installed and used it. Even worse it runs continuously! This app- as other torrent apps- broadcatsts your data, and the downloaded items are often infected. A mac is much more sensitive than a PC. So carefully examine which apps were so downloaded; and think about it before using the torrent app again.
3. In SystemPreferences->Users&Groups->LoginItems remove ALL entries, with the minus sign underneath.
After that restart.
4. Now uninstall the following: Growl, smcFancontrol, LittleSnitch, AndroidFileTransfer.
5. I do not have experience with all those audio and music apps you use, but I expect several are not (yet) compatible with Yosemite. Check that and uninstall what is not ready for Yosemite. Maybe you do not even need some at all.
6. Rethink which apps are hacked. They may be infected.
7. In MacintoshHD->Library->InternetPlug-ins delete the two AdobePDFViewer plugins.
8. In MacintoshHD->Library->LaunchDaemons delete the Adobe Switchboard plist.
9. Carefully research the compatibility of Digidesign !! -
Is anyone facing the similar problem of visible lag while opening app with 3G data on? It seems apple has made 5s slow to improve iphone 4 performance.5s was very smooth on 7.0.6 even with 3G data on. Is this a bug? Is apple going to fix this soon?
I have same Problem. I tried all options - Reset All Settings, Erase Content & reset all settings, Upgrated to IOS8.1, Restore using iTune. But problem persists.
When I turn Cellular Data or Wifi ON, then there is a lag while opening the Apps. But If I turn Data/Wifi off, phone becomes super fast. I have checked with my friends. They are not facing this issue. Not sure if Apple know this. -
Yosemite is very slow when i switch on. can someone say why and i can solve the problem??
yosemite is very slow when i switch on. ten or more seconds. why? how i can solve this problem??
Thanks riccardo.italy.The following items or conditions can slow a Mac. Please see if any of them apply:
1) Are you running any anti-virus/internet security applications?
2) Are you running any "cleaning/tune-up/optimizations" applications?
3) Any peer-to-peer or torrent downloading software?
4) Any third-party disk backup software that came bundled with an external hard drive?
5) Any online backup scheme other than iCloud or DropBox (Carbonite; GoogleDrive; MS One Drive)?
6) Did your financial institution ask you to install Trusteer EndPoint Protection (also known as Trusteer Rapport)?
If you can answer "yes" to any of those questions, you have some unneeded and performance-robbing software installed. -
Since upgrading my mid/late 2007 MacBookPro to Mountain Lion 10.8.1 everything slowed down
Yesterday I upgraded to Mountain Lion OS 10.8.1 everything slowed down. Adobe Illustrator takes forever to perform any operation, Same goes for Chrome. I have quit all the aplication except for Illustrator and it's still extremely slow.
I have upgraded ONLY because I read that upgrading to 10.8 will fix a problem with saving to PDF from Illustrator. It did not solve that problem.
Intead now I cannot use Ms Word, Excell, Powerooint I was able to use with 10.6. !!!
I want to revert back to OS 10.6.!!!
How can I do that???
Please help!
AgathaMWelcome to Apple Support Communities
Open > http://www.reedcorner.net/understanding-upgrade-nightmares/ -
Indesign CC (2014) on MacPro (2014) Yosemite, Pages thumbnails slow to render, was fine on previous OS, please help?!
You now know that you should never uninstall old until you are sure new works
Previous via Cloud http://helpx.adobe.com/creative-cloud/help/install-apps.html#previous -
I accidentally clicked something that made everything pertaining to the address bar disappear. (the home button, the refresh button, and the back arrows. also the ability to click on the folders like "file", or "edit") How do I get that back?
You should update Firefox to the latest version via "Help > Check for Updates"
Your above posted system details show outdated plugin(s) with known security and stability risks that you should update.
# Shockwave Flash 10.1 r102
# Java Plug-in 1.6.0_01 for Netscape Navigator (DLL Helper)
Update the [[Managing the Flash plugin|Flash]] plugin to the latest version.
*http://www.adobe.com/software/flash/about/
Update the [[Java]] plugin to the latest version.
*http://www.oracle.com/technetwork/java/javase/downloads/index.html (Java Platform: Download JRE) -
Firefox has enlarged facebook and made everything really big. What do I do to put everything back to normal size?
See this:
https://support.mozilla.com/en-US/kb/Page+Zoom -
I Dont like ios 7 and it makes everything slow please let me go back to ios6
i Dont like ios 7 and it makes everything slow please let me go back to ios6
Sorry, Apple has no approved method to downgrade the version of iOS on your iDevice. You can voice your displeasure with the iOS by leaving feedback at the appropriate subsection from the link below.
http://www.apple.com/feedback/ -
After ripping about 75 cds everything slowed down. Help- is it cache issue?
Please help me out. I am new to this. I ripped about 100 cds into itunes and everything slowed where I couldnt rip and listen at the same time, or use other programs for that matter. Definitely a RAM issue or so it seems. I cleared my temp internet files to see if it would help, but no. I had also downloaded some updates by coincidence around the same time so i restored my puter back to yesterday thinking that was those updates. Everything went back to normal and started ripping quickly 10x, 11x while playing tunes and me surfing. Now it slowed again about 75 cds later. No reason why. i didnt do anything but rip the tunes.
Is there some play to clear the RAM or cache or something? What is stealing away my resources. Rebooting does not help.
I hope you can!!!
Thanks a lot !!NOT true. Going back does not reverse all the work you have done. It simply restores settings and files to where they were. All the cds I burned remained as did every other file i created or edited.
But going back is not recommended and certainly shouldnt be done regularily. -
I am running LR 4.4 on a iMac with OS X (Yosemite). Everything works in the develop module but when i get to the print module, clicl on print and the apple print dialogue box opens, and I click onn print there, the app closes. It has now happened about a dozen times. I have downloaded LR 4.4 from the internet but the problem continues.
Very Important, how much Free Space is on your Hard Drive first of all? Click on the Macintosh HD on the Desktop, then do a Get Info on it.
Could be many things, we should start with this...
"Try Disk Utility
1. Insert the Mac OS X Install disc, then restart the computer while holding the C key.
2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu at top of the screen. (In Mac OS X 10.4 or later, you must select your language first.)
*Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.*
3. Click the First Aid tab.
4. Select your Mac OS X volume.
5. Click Repair Disk, (not Repair Permissions). Disk Utility checks and repairs the disk."
http://docs.info.apple.com/article.html?artnum=106214
Then try a Safe Boot, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, reboot when it completes.
(Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive.)
If perchance you can't find your install Disc, at least try it from the Safe Boot part onward.
Do they launch OK while in Safe Mode? -
Well I start my search for a solution here. About two weeks ago my MacBook Pro slowed down. Everything slowed down. Slow internet (I have 10mg service), slow to open windows, slow to access parts of drop down menus, slow to go back, slow to open programs, slow to 'forward' instructions such as print, search, open. Slow to close programs, close down, restart. Everything just slowed down. I have lots of available memory, nothing else running at the same time. I don't know where to look to resolve the problem. I've learned to expect the beach ball but sometimes it doesn't even show up. Any thoughts? Thank you.
I would suggest that you check and repair permissions and, perhaps, even verify the hard drive and repair if needed. Often file permissions become corrupted. Boot from your install disc by holding down the "C" key during startup. After picking your language, go to the Utilities->disk utilities. Verify the disk and then repair permissions. Given that a try before you do anything drastic.
-
So here is what I found and what I did to try to alleviate the RAM eating upgrade named Yosemite. This guy has helped quite a few people, you can read all the comments and I gave it several tries this morning.
Oct 23, 2014 10:59 AM
I post this hoping to help those users who, like me, are experiencing high CPU usage and massive memory leaking with OS X core services and apps, leading to slow performance and battery drain.
I've tried everything mentioned, but found the right combination of steps to follow. I've tried this with seven different Apple computers, including mine, and has worked well so far. I applied this method yesterday to give these process a 24 hour window to fail again, so far everything good.
First step: disconnect any external or secondary monitors, if any is present. The video memory allocation leak can also happen if you have a system with an integrated card, like Intel, with no external monitors attached.
Second step: Shut down your machine and enter Safe Mode (press shift once you turn on your computer again, more info below). Once you're there, fix your disk permissions.
Guide of how to access Safe Mode: OS X: What is Safe Boot, Safe Mode?
Third step: From Safe Mode turn off your machine again and reset your System Management Controller (SMC). There are different methods, depending on machine, to do this. To know what method applies to yours read the following guide.
Intel-based Macs: Resetting the System Management Controller (SMC)
Fourth step: Once your machine completes a full boot after resetting the SMC turn it off again and reset your PRAM (THIS IS THE MOST IMPORTANT STEP, BUT THE PREVIOUS ONES ARE ESSENTIAL FOR THIS ONE TO WORK). The PRAM stores small bits of data that indicate our Apple computer how to interact with the devices connected to it, including monitors and video cards. It also affects software.
To reset it you should hold the OPTION, COMMAND, P and R keys in your keyboard immediately after turning on your machine again.You'll hear the start up chime, continue pressing the keys until the machine boots and the chime starts A SECOND TIME, then release. IF YOUR YOSEMITE INSTALLATION LOCKS UP AT A BLACK SCREEN AFTER THIS, DONT PANIC! It's normal, just turn off your computer and let it boot again.
More info about PRAM: OS X Mavericks: Reset your computer’s PRAM
Voila, reconnect your external displays and enjoy your system.
Message was edited by: Luis_Mercado
MacBook Air, OS X Yosemite (10.10)
So here is my EtreCheck report that is a bit above my head but anything in red isn't good I'm sure. I'd really appreciate some friendly advice
EtreCheck version: 2.0.11 (98)
Report generated at
Hardware Information: ℹ️
iMac (24-inch Mid 2007) (Verified)
iMac - model: iMac7,1
1 2.4 GHz Intel Core 2 Duo CPU: 2-core
6 GB RAM Upgradeable
BANK 0/DIMM0
4 GB DDR2 SDRAM 667 MHz ok
BANK 1/DIMM1
2 GB DDR2 SDRAM 667 MHz ok
Bluetooth: Old - Handoff/Airdrop2 not supported
Wireless: en1: 802.11 a/b/g/n
Video Information: ℹ️
ATI,RadeonHD2600 - VRAM: 256 MB
iMac 1920 x 1200
System Software: ℹ️
OS X 10.10 (14A389) - Uptime: 2:34:25
Disk Information: ℹ️
WDC WD3200AAJS-40RYA0 disk0 : (320.07 GB)
S.M.A.R.T. Status: Verified
EFI (disk0s1) <not mounted> : 210 MB
Data (disk0s2) / [Startup]: 319.21 GB (230.04 GB free)
Recovery HD (disk0s3) <not mounted> [Recovery]: 650 MB
USB Information: ℹ️
VIA Labs, Inc. USB2.0 Hub
Generic USB Storage
Western Digital My Passport 0824 2 TB
S.M.A.R.T. Status: Verified
EFI (disk2s1) <not mounted> : 210 MB
Passport Slim (disk2s2) /Volumes/Passport Slim : 2.00 TB (1.62 TB free)
VIA Labs, Inc. USB2.0 Hub
Apple Inc. Built-in iSight
Apple Inc. Bluetooth USB Host Controller
Logitech USB Receiver
Apple Computer, Inc. IR Receiver
Firewire Information: ℹ️
WD Passport III 800mbit - 800mbit max
S.M.A.R.T. Status: Verified
EFI (disk1s1) <not mounted> : 210 MB
Passport (disk1s2) /Volumes/Passport : 499.76 GB (370.05 GB free)
Gatekeeper: ℹ️
Anywhere
Kernel Extensions: ℹ️
/Library/Extensions
[not loaded] com.lge.driver.LGAndroidmdmcontrol (4.15 - SDK 10.10) Support
[not loaded] com.lge.driver.LGAndroidmdmdata (4.15 - SDK 10.10) Support
[not loaded] com.lge.driver.LGAndroidndiscontrol (4.15 - SDK 10.10) Support
[not loaded] com.lge.driver.LGAndroidndisdata (4.15 - SDK 10.10) Support
[not loaded] com.lge.driver.LGAndroidrndis (4.15 - SDK 10.10) Support
[not loaded] com.lge.driver.LGAndroidserial (4.15 - SDK 10.10) Support
[not loaded] com.lge.driver.LGAndroidusbbus (4.15 - SDK 10.10) Support
/System/Library/Extensions
[not loaded] com.devguru.driver.SamsungComposite (1.4.26 - SDK 10.6) Support
[not loaded] com.markspace.iokit.IOMissingSyncMassStorage (199) Support
[not loaded] com.markspace.missingsync.palmos.classicseize (1) Support
[not loaded] com.microsoft.driver.MicrosoftKeyboard (6.3) Support
[not loaded] com.microsoft.driver.MicrosoftMouse (8.2) Support
[not loaded] com.palm.ClassicNotSeizeDriver (3.2.1) Support
[loaded] com.wdc.driver.1394.64.10.9 (1.0.1 - SDK 10.9) Support
[not loaded] com.wdc.driver.1394HP (1.0.5) Support
[loaded] com.wdc.driver.USB.64.10.9 (1.0.1 - SDK 10.9) Support
[not loaded] com.wdc.driver.USBHP (1.0.1) Support
/System/Library/Extensions/MicrosoftKeyboard.kext/Contents/PlugIns
[not loaded] com.microsoft.driver.MicrosoftKeyboardBluetooth (6.3) Support
[not loaded] com.microsoft.driver.MicrosoftKeyboardUSB (6.3) Support
/System/Library/Extensions/MicrosoftMouse.kext/Contents/PlugIns
[not loaded] com.microsoft.driver.MicrosoftMouseBluetooth (8.2) Support
[not loaded] com.microsoft.driver.MicrosoftMouseUSB (8.2) Support
/System/Library/Extensions/ssuddrv.kext/Contents/PlugIns
[not loaded] com.devguru.driver.SamsungACMControl (1.4.26 - SDK 10.6) Support
[not loaded] com.devguru.driver.SamsungACMData (1.4.26 - SDK 10.6) Support
[not loaded] com.devguru.driver.SamsungMTP (1.4.26 - SDK 10.5) Support
[not loaded] com.devguru.driver.SamsungSerial (1.4.26 - SDK 10.6) Support
Startup Items: ℹ️
Cocktail: Path: /Library/StartupItems/Cocktail
Startup items are obsolete and will not work in future versions of OS X
Problem System Launch Agents: ℹ️
[failed] com.apple.security.cloudkeychainproxy.plist
Problem System Launch Daemons: ℹ️
[failed] com.apple.ctkd.plist
[failed] com.apple.ifdreader.plist
[failed] com.apple.nehelper.plist
[failed] com.apple.nsurlsessiond.plist
[failed] com.apple.softwareupdated.plist
[failed] com.apple.wdhelper.plist
Launch Agents: ℹ️
[loaded] com.google.keystone.agent.plist Support
[loaded] com.hp.help.tocgenerator.plist Support
[not loaded] com.maintain.LogOut.plist Support
[loaded] com.maintain.PurgeInactiveMemory.plist Support
[not loaded] com.maintain.Restart.plist Support
[not loaded] com.maintain.ShutDown.plist Support
[not loaded] com.maintain.Sleep.plist Support
[running] com.maintain.SystemEvents.plist Support
[loaded] com.oracle.java.Java-Updater.plist Support
[invalid?] com.tvmobili.artwork.plist Support
[running] com.wdc.raidmanagerstatusmenu.plist Support
Launch Daemons: ℹ️
[loaded] com.adobe.fpsaud.plist Support
[running] com.bjango.istatserver.plist Support
[loaded] com.google.keystone.daemon.plist Support
[loaded] com.hp.lightscribe.plist Support
[loaded] com.maintain.CocktailScheduler.plist Support
[loaded] com.maintain.HideSpotlightMenuBarIcon.plist Support
[loaded] com.oracle.java.Helper-Tool.plist Support
[loaded] com.oracle.java.JavaUpdateHelper.plist Support
[invalid?] com.tvmobili.tvmobilisvcd.plist Support
[running] com.wdc.WDRAIDDriveService.plist Support
[loaded] com.westerndigital.WD-Drive-Manager-Installer.plist Support
[loaded] net.freemacsoft.LiteIcon.LIHelperTool.plist Support
User Launch Agents: ℹ️
[loaded] com.adobe.ARM.[...].plist Support
[loaded] com.maintain.ShowUserLibraryDirectory.plist Support
[loaded] uk.co.markallan.clamxav.freshclam.plist Support
User Login Items: ℹ️
Macs Fan Control Application (/Applications/Macs Fan Control.app)
Solar Service Application (/Users/[redacted]/Library/Application Support/Logitech/SolarService/Solar Service.app)
Android File Transfer Agent Application (/Users/[redacted]/Library/Application Support/Google/Android File Transfer/Android File Transfer Agent.app)
WDDriveUtilityHelper Application (/Applications/WD Drive Utilities.app/Contents/WDDriveUtilityHelper.app)
WD Quick View UNKNOWN (missing value)
Internet Plug-ins: ℹ️
Unity Web Player: Version: UnityPlayer version 2.0.2f2 Support
Default Browser: Version: 600 - SDK 10.10
Flip4Mac WMV Plugin: Version: 2.4.2.4 Support
OfficeLiveBrowserPlugin: Version: 12.3.6 Support
RealPlayer Plugin: Version: Unknown
Silverlight: Version: 5.1.30514.0 - SDK 10.6 Support
FlashPlayer-10.6: Version: 15.0.0.223 - SDK 10.6 Support
DivXBrowserPlugin: Version: 1.4 Support
Flash Player: Version: 15.0.0.223 - SDK 10.6 Support
QuickTime Plugin: Version: 7.7.3
iPhotoPhotocast: Version: 7.0
AdobePDFViewer: Version: 9.5.5 Support
JavaAppletPlugin: Version: Java 7 Update 71 Check version
3rd Party Preference Panes: ℹ️
Flash Player Support
Java Support
Microsoft Mouse Support
MusicManager Support
Time Machine: ℹ️
Skip System Files: NO
Mobile backups: ON
Auto backup: NO - Auto backup turned off
Volumes being backed up:
Data: Disk size: 319.21 GB Disk used: 89.17 GB
Destinations:
Passport [Local]
Total size: 499.76 GB
Total number of backups: 25
Oldest backup: 2014-05-10 16:56:40 +0000
Last backup: 2014-11-14 17:38:44 +0000
Size of backup disk: Adequate
Backup size 499.76 GB > (Disk used 89.17 GB X 3)
Top Processes by CPU: ℹ️
3% WindowServer
1% Google Chrome Canary
1% coreaudiod
0% systemstatsd
0% ps
Top Processes by Memory: ℹ️
174 MB Google Chrome Canary
84 MB Google Chrome Helper
64 MB mds_stores
52 MB Finder
45 MB iconservicesagent
Virtual Memory Information: ℹ️
3.02 GB Free RAM
1.69 GB Active RAM
317 MB Inactive RAM
753 MB Wired RAM
8.69 GB Page-ins
156 MB Page-outs
I hope to hear from anyone even to knock me in the head, lol. Thanks in advance and I'll be around trying to figure this out.1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem. But with the aid of the test results, the solution may take a few minutes, instead of hours or days.
Don't be put off by the complexity of these instructions. The process is much less complicated than the description. You do harder tasks with the computer all the time.
2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. Backup is always a must, and when you're having any kind of trouble with the computer, you may be at higher than usual risk of losing data, whether you follow these instructions or not.
There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
3. Below are instructions to run a UNIX shell script, a type of program. As I wrote above, it changes nothing. It doesn't send or receive any data on the network. All it does is to generate a human-readable report on the state of the computer. That report goes nowhere unless you choose to share it. If you prefer, you can act on it yourself without disclosing the contents to me or anyone else.
You should be wondering whether you can believe me, and whether it's safe to run a program at the behest of a stranger. In general, no, it's not safe and I don't encourage it.
In this case, however, there are a couple of ways for you to decide whether the program is safe without having to trust me. First, you can read it. Unlike an application that you download and click to run, it's transparent, so anyone with the necessary skill can verify what it does.
You may not be able to understand the script yourself. But variations of the script have been posted on this website thousands of times over a period of years. The site is hosted by Apple, which does not allow it to be used to distribute harmful software. Any one of the millions of registered users could have read the script and raised the alarm if it was harmful. Then I would not be here now and you would not be reading this message.
Nevertheless, if you can't satisfy yourself that these instructions are safe, don't follow them. Ask for other options.
4. Here's a summary of what you need to do, if you choose to proceed:
☞ Copy a line of text in this window to the Clipboard.
☞ Paste into the window of another application.
☞ Wait for the test to run. It usually takes a few minutes.
☞ Paste the results, which will have been copied automatically, back into a reply on this page.
The sequence is: copy, paste, wait, paste again. You don't need to copy a second time. Details follow.
5. You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode, under the conditions in which the problem is reproduced. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
6. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
7. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in the browser window, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
Triple-click anywhere in the line of text below on this page to select it:
PATH=/usr/bin:/bin:/usr/sbin:/sbin:/usr/libexec;clear;cd;p=(Software Hardware Memory Diagnostics Power FireWire Thunderbolt USB Fonts SerialATA 4 1000 25 5120 KiB/s 1024 85 \\b%% 20480 1 MB/s 25000 ports ' com.clark.\* \*dropbox \*genieo\* \*GoogleDr\* \*k.AutoCAD\* \*k.Maya\* vidinst\* ' DYLD_INSERT_LIBRARIES\ DYLD_LIBRARY_PATH -86 "` route -n get default|awk '/e:/{print $2}' `" 25 N\\/A down up 102400 25600 recvfrom sendto CFBundleIdentifier 25 25 25 1000 MB ' com.adobe.AAM.Updater-1.0 com.adobe.AdobeCreativeCloud com.adobe.CS4ServiceManager com.adobe.CS5ServiceManager com.adobe.fpsaud com.adobe.SwitchBoard com.apple.aelwriter com.apple.AirPortBaseStationAgent com.apple.FolderActions.enabled com.apple.FolderActions.folders com.apple.installer.osmessagetracing com.apple.mrt.uiagent com.apple.ReportCrash.Self com.apple.rpmuxd com.apple.SafariNotificationAgent com.apple.usbmuxd com.google.keystone.agent com.google.keystone.daemon com.microsoft.office.licensing.helper com.oracle.java.Helper-Tool com.oracle.java.JavaUpdateHelper ' ' 879294308 461455494 3627668074 1083382502 1274181950 1855907737 1848501757 464843899 3694147963 1417519526 1233118628 2456546649 2806998573 2778718105 2636415542 842973933 3301885676 891055588 998894468 695903914 4136085286 ' 51 5120 files );N5=${#p[@]};p[N5]=` networksetup -listnetworkserviceorder|awk ' NR>1 { sub(/^\([0-9]+\) /,"");n=$0;getline;} $NF=="'${p[26]}')" { sub(/.$/,"",$NF);print n;exit;} ' `;f=('\n%s: %s\n' '\n%s\n\n%s\n' '\nRAM details\n%s\n' %s\ %s '%s\n-\t%s\n' );S0() { echo ' { q=$NF+0;$NF="";u=$(NF-1);$(NF-1)="";gsub(/^ +| +$/,"");if(q>='${p[$1]}') printf("%s (UID %s) is using %s '${p[$2]}'",$0,u,q);} ';};s=(' s/[0-9A-Za-z._]+@[0-9A-Za-z.]+\.[0-9A-Za-z]{2,4}/EMAIL/g;/faceb/s/(at\.)[^.]+/\1NAME/g;/\/Shared/!s/(\/Users\/)[^ /]+/\1USER/g;s/[-0-9A-Fa-f]{22,}/UUID/g;' ' s/^ +//;/de: S|[nst]:/p;' ' {sub(/^ +/,"")};/er:/;/y:/&&$2<'${p[10]} ' 1s/://;3,6d;/[my].+:/d;s/^ {4}//;H;${ g;s/\n$//;/s: (E[^m]|[^EO])|x([^08]|02[^F]|8[^0])/p;} ' ' 5h;6{ H;g;/P/!p;} ' ' ($1~/^Cy/&&$3>'${p[11]}')||($1~/^Cond/&&$2!~/^N/) ' ' /:$/{ N;/:.+:/d;s/ *://;b0'$'\n'' };/^ *(V.+ [0N]|Man).+ /{ s/ 0x.... //;s/[()]//g;s/(.+: )(.+)/ (\2)/;H;};$b0'$'\n'' d;:0'$'\n'' x;s/\n\n//;/Apple[ ,]|Genesy|Intel|SMSC/d;s/\n.*//;/\)$/p;' ' s/^.*C/C/;H;${ g;/No th|pms/!p;} ' '/= [^GO]/p' '{$1=""};1' ' /Of/!{ s/^.+is |\.//g;p;} ' ' $0&&!/ / { n++;print;} END { if(n<10) print "com.apple.";} ' ' { sub(/ :/,"");print|"tail -n'${p[12]}'";} ' ' NR==2&&$4<='${p[13]}' { print $4;} ' ' END { $2/=256;if($2>='${p[15]}') print int($2) } ' ' NR!=13{next};{sub(/[+-]$/,"",$NF)};'"`S0 21 22`" 'NR!=2{next}'"`S0 37 17`" ' NR!=5||$8!~/[RW]/{next};{ $(NF-1)=$1;$NF=int($NF/10000000);for(i=1;i<=3;i++){$i="";$(NF-1-i)="";};};'"`S0 19 20`" 's:^:/:p' '/\.kext\/(Contents\/)?Info\.plist$/p' 's/^.{52}(.+) <.+/\1/p' ' /Launch[AD].+\.plist$/ { n++;print;} END { if(n<200) print "/System/";} ' '/\.xpc\/(Contents\/)?Info\.plist$/p' ' NR>1&&!/0x|\.[0-9]+$|com\.apple\.launchctl\.(Aqua|Background|System)$/ { print $3;} ' ' /\.(framew|lproj)|\):/d;/plist:|:.+(Mach|scrip)/s/:[^:]+//p ' '/^root$/p' ' !/\/Contents\/.+\/Contents|Applic|Autom|Frameworks/&&/Lib.+\/Info.plist$/ { n++;print;} END { if(n<1100) print "/System/";} ' '/^\/usr\/lib\/.+dylib$/p' ' /Temp|emac/{next};/(etc|Preferences|Launch[AD].+)\// { sub(".(/private)?","");n++;print;} END { split("'"${p[41]}"'",b);split("'"${p[42]}"'",c);for(i in b) print b[i]".plist\t"c[i];if(n<500) print "Launch";} ' ' /\/(Contents\/.+\/Contents|Frameworks)\/|\.wdgt\/.+\.([bw]|plu)/d;p;' 's/\/(Contents\/)?Info.plist$//;p' ' { gsub("^| |\n","\\|\\|kMDItem'${p[35]}'=");sub("^...."," ") };1 ' p '{print $3"\t"$1}' 's/\'$'\t''.+//p' 's/1/On/p' '/Prox.+: [^0]/p' '$2>'${p[43]}'{$2=$2-1;print}' ' BEGIN { i="'${p[26]}'";M1='${p[16]}';M2='${p[18]}';M3='${p[31]}';M4='${p[32]}';} !/^A/{next};/%/ { getline;if($5<M1) a="user "$2"%, system "$4"%";} /disk0/&&$4>M2 { b=$3" ops/s, "$4" blocks/s";} $2==i { if(c) { d=$3+$4+$5+$6;next;};if($4>M3||$6>M4) c=int($4/1024)" in, "int($6/1024)" out";} END { if(a) print "CPU: "a;if(b) print "I/O: "b;if(c) print "Net: "c" (KiB/s)";if(d) print "Net errors: "d" packets/s";} ' ' /r\[0\] /&&$NF!~/^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./ { print $NF;exit;} ' ' !/^T/ { printf "(static)";exit;} ' '/apsd|BKAg|OpenD/!s/:.+//p' ' (/k:/&&$3!~/(255\.){3}0/ )||(/v6:/&&$2!~/A/ ) ' ' $1~"lR"&&$2<='${p[25]}';$1~"li"&&$3!~"wpa2";' ' BEGIN { FS=":";p="uniq -c|sed -E '"'s/ +\\([0-9]+\\)\\(.+\\)/\\\2 x\\\1/;s/x1$//'"'";} { n=split($3,a,".");sub(/_2[01].+/,"",$3);print $2" "$3" "a[n]$1|p;b=b$1;} END { close(p);if(b) print("\n\t* Code injection");} ' ' NR!=4{next} {$NF/=10240} '"`S0 27 14`" ' END { if($3~/[0-9]/)print$3;} ' ' BEGIN { L='${p[36]}';} !/^[[:space:]]*(#.*)?$/ { l++;if(l<=L) f=f"\n "$0;} END { F=FILENAME;if(!F) exit;if(!f) f="\n [N/A]";"cksum "F|getline C;split(C, A);C="checksum "A[1];"file -b "F|getline T;if(T!~/^(AS.+ (En.+ )?text(, with v.+)?$|(Bo|PO).+ sh.+ text ex|XM)/) F=F" ("T", "C")";else F=F" ("C")";printf("\nContents of %s\n%s\n",F,f);if(l>L) printf("\n ...and %s more line(s)\n",l-L);} ' ' s/^ ?n...://p;s/^ ?p...:/-'$'\t''/p;' 's/0/Off/p' ' END{print NR} ' ' /id: N|te: Y/{i++} END{print i} ' ' / / { print "'"${p[28]}"'";exit;};1;' '/ en/!s/\.//p' ' NR!=13{next};{sub(/[+-M]$/,"",$NF)};'"`S0 39 40`" ' $10~/\(L/&&$9!~"localhost" { sub(/.+:/,"",$9);print $1": "$9|"sort|uniq";} ' '/^ +r/s/.+"(.+)".+/\1/p' 's/(.+\.wdgt)\/(Contents\/)?Info\.plist$/\1/p' 's/^.+\/(.+)\.wdgt$/\1/p' ' /l: /{ /DVD/d;s/.+: //;b0'$'\n'' };/s: /{ /V/d;s/^ */- /;H;};$b0'$'\n'' d;:0'$'\n'' x;/APPLE [^:]+$/d;p;' ' /^find: /d;p;' "`S0 44 45`" ' BEGIN{FS="= "} /Path/{print $2} ' ' /^ *$/d;s/^ */ /;' ' s/^.+ |\(.+\)$//g;p ' '/\.(appex|pluginkit)\/Contents\/Info\.plist$/p' ' /2/{print "WARN"};/4/{print "CRITICAL"};' 's/^.+: //p' );c1=(system_profiler pmset\ -g nvram fdesetup find syslog df vm_stat sar ps sudo\ crontab sudo\ iotop top pkgutil 'PlistBuddy 2>&1 -c "Print' whoami cksum kextstat launchctl sudo\ launchctl crontab 'sudo defaults read' stat lsbom mdfind ' for i in ${p[24]};do ${c1[18]} ${c2[27]} $i;done;' defaults\ read scutil sudo\ dtrace sudo\ profiles sed\ -En awk /S*/*/P*/*/*/C*/*/airport networksetup mdutil sudo\ lsof test osascript\ -e sysctl\ -n pluginkit sudo\ smcDiagnose );c2=(com.apple.loginwindow\ LoginHook '" /L*/P*/loginw*' "'tell app \"System Events\" to get properties of login items'|tr , \\\n" 'L*/Ca*/com.ap*.Saf*/E*/* -d 1 -name In*t -exec '"${c1[14]}"' :CFBundleDisplayName" {} \;|sort|uniq' '~ $TMPDIR.. \( -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 \)' '.??* -path .Trash -prune -o -type d -name *.app -print -prune' :${p[35]}\" :Label\" '{/,}L*/{Con,Pref}* -type f ! -size 0 -name *.plist -exec plutil -s {} \;' "-f'%N: %l' Desktop L*/Keyc*" therm sysload boot-args status " -F '\$Time \$(RefProc): \$Message' -k Sender kernel -k Message Req 'bad |Beac|caug|corru|dead[^bl]|FAIL|fail|GPU |hfs: Ru|inval|jnl:|last value [1-9]|n Cause: -|NVDA\(|pagin|proc: t|Roamed|rror|ssert|Thrott|tim(ed? ?|ing )o|WARN' -k Message Rne 'Goog|ksadm|Roame|SMC:|suhel| VALI|ver-r|xpma' -o -o -k Sender fseventsd -k Message Req SL -o -k Sender Req launchd -k Message Req de: " '-du -n DEV -n EDEV 1 10' 'acrx -o comm,ruid,%cpu' '-t1 10 1' '-f -pfc /var/db/r*/com.apple.*.{BS,Bas,Es,J,OSXU,Rem,up}*.bom' '{/,}L*/Lo*/Diag* -type f -regex .\*[cght] ! -name .?\* ! -name \*ag \( -exec grep -lq "^Thread c" {} \; -exec printf \* \; -o -true \) -execdir stat -f:%Sc:%N -t%F {} \;|sort -t: -k2 |tail -n'${p[38]} '/S*/*/Ca*/*xpc* >&- ||echo No' '-L /{S*/,}L*/StartupItems -type f -exec file {} +' '-L /S*/L*/{C*/Sec*A,Ex}* {/,}L*/{A*d,Ca*/*/Ex,Co{mpon,reM},Ex,In{p,ter},iTu*/*P,Keyb,Mail/B,Pr*P,Qu*T,Scripti,Sec,Servi,Spo,Widg}* -path \\*s/Resources -prune -o -type f -name Info.plist' '/usr/lib -type f -name *.dylib' `awk "${s[31]}"<<<${p[23]}` "/e*/{auto,{cron,fs}tab,hosts,{[lp],sy}*.conf,mach_i*/*,pam.d/*,ssh{,d}_config,*.local} {,/usr/local}/etc/periodic/*/* /L*/P*{,/*}/com.a*.{Bo,sec*.ap}*t {/S*/,/,}L*/Lau*/*t .launchd.conf" list getenv /Library/Preferences/com.apple.alf\ globalstate --proxy '-n get default' -I --dns -getdnsservers\ "${p[N5]}" -getinfo\ "${p[N5]}" -P -m\ / '' -n1 '-R -l1 -n1 -o prt -stats command,uid,prt' '--regexp --only-files --files com.apple.pkg.*|sort|uniq' -kl -l -s\ / '-R -l1 -n1 -o mem -stats command,uid,mem' '+c0 -i4TCP:0-1023' com.apple.dashboard\ layer-gadgets '-d /L*/Mana*/$USER&&echo On' '-app Safari WebKitDNSPrefetchingEnabled' "+c0 -l|awk '{print(\$1,\$3)}'|sort|uniq -c|sort -n|tail -1|awk '{print(\$2,\$3,\$1)}'" -m 'L*/{Con*/*/Data/L*/,}Pref* -type f -size 0c -name *.plist.???????|wc -l' kern.memorystatus_vm_pressure_level '3>&1 >&- 2>&3' );N1=${#c2[@]};for j in {0..9};do c2[N1+j]=SP${p[j]}DataType;done;N2=${#c2[@]};for j in 0 1;do c2[N2+j]="-n ' syscall::'${p[33+j]}':return { @out[execname,uid]=sum(arg0) } tick-10sec { trunc(@out,1);exit(0);} '";done;l=(Restricted\ files Hidden\ apps 'Elapsed time (s)' POST Battery Safari\ extensions Bad\ plists 'High file counts' User Heat System\ load boot\ args FileVault Diagnostic\ reports Log 'Free space (MiB)' 'Swap (MiB)' Activity 'CPU per process' Login\ hook 'I/O per process' Mach\ ports kexts Daemons Agents XPC\ cache Startup\ items Admin\ access Root\ access Bundles dylibs Apps Font\ issues Inserted\ dylibs Firewall Proxies DNS TCP/IP Wi-Fi Profiles Root\ crontab User\ crontab 'Global login items' 'User login items' Spotlight Memory Listeners Widgets Parental\ Controls Prefetching SATA Descriptors App\ extensions Lockfiles Memory\ pressure SMC );N3=${#l[@]};for i in 0 1 2;do l[N3+i]=${p[5+i]};done;N4=${#l[@]};for j in 0 1;do l[N4+j]="Current ${p[29+j]}stream data";done;A0() { id -G|grep -qw 80;v[1]=$?;((v[1]==0))&&sudo true;v[2]=$?;v[3]=`date +%s`;clear >&-;date '+Start time: %T %D%n';};for i in 0 1;do eval ' A'$((1+i))'() { v=` eval "${c1[$1]} ${c2[$2]}"|'${c1[30+i]}' "${s[$3]}" `;[[ "$v" ]];};A'$((3+i))'() { v=` while read i;do [[ "$i" ]]&&eval "${c1[$1]} ${c2[$2]}" \"$i\"|'${c1[30+i]}' "${s[$3]}";done<<<"${v[$4]}" `;[[ "$v" ]];};A'$((5+i))'() { v=` while read i;do '${c1[30+i]}' "${s[$1]}" "$i";done<<<"${v[$2]}" `;[[ "$v" ]];};';done;A7(){ v=$((`date +%s`-v[3]));};B2(){ v[$1]="$v";};for i in 0 1;do eval ' B'$i'() { v=;((v['$((i+1))']==0))||{ v=No;false;};};B'$((3+i))'() { v[$2]=`'${c1[30+i]}' "${s[$3]}"<<<"${v[$1]}"`;} ';done;B5(){ v[$1]="${v[$1]}"$'\n'"${v[$2]}";};B6() { v=` paste -d: <(printf "${v[$1]}") <(printf "${v[$2]}")|awk -F: ' {printf("'"${f[$3]}"'",$1,$2)} ' `;};B7(){ v=`grep -Fv "${v[$1]}"<<<"$v"`;};C0() { [[ "$v" ]]&&sed -E "$s"<<<"$v";};C1() { [[ "$v" ]]&&printf "${f[$1]}" "${l[$2]}" "$v"|sed -E "$s";};C2() { v=`echo $v`;[[ "$v" != 0 ]]&&C1 0 $1;};C3() { v=`sed -E "${s[63]}"<<<"$v"`&&C1 1 $1;};for i in 1 2;do for j in 0 2 3;do eval D$i$j'(){ A'$i' $1 $2 $3; C'$j' $4;};';done;done;{ A0;D20 0 $((N1+1)) 2;D10 0 $N1 1;B0;C2 27;B0&&! B1&&C2 28;D12 15 37 25 8;A1 0 $((N1+2)) 3;C0;D13 0 $((N1+3)) 4 3;D23 0 $((N1+4)) 5 4;D13 0 $((N1+9)) 59 50;for i in 0 1 2;do D13 0 $((N1+5+i)) 6 $((N3+i));done;D13 1 10 7 9;D13 1 11 8 10;B1&&D13 40 53 67 55;D22 2 12 9 11;D12 3 13 10 12;D23 4 19 44 13;D23 5 14 12 14;D22 6 36 13 15;D22 38 52 66 54;D22 7 37 14 16;D23 8 15 38 17;D22 9 16 16 18;B1&&{ D22 35 49 61 51;D22 11 17 17 20;for i in 0 1;do D22 28 $((N2+i)) 45 $((N4+i));done;};D22 12 44 54 45;D22 12 39 15 21;A1 13 40 18;B2 4;B3 4 0 19;A3 14 6 32 0;B4 0 5 11;A1 17 41 20;B7 5;C3 22;B4 4 6 21;A3 14 7 32 6;B4 0 7 11;B3 4 0 22;A3 14 6 32 0;B4 0 8 11;B5 7 8;B1&&{ A2 19 26 23;B7 7;C3 23;};A2 18 26 23;B7 7;C3 24;D13 4 21 24 26;B4 4 12 26;B3 4 13 27;A1 4 22 29;B7 12;B2 14;A4 14 6 52 14;B2 15;B6 14 15 4;B3 0 0 30;C3 29;A1 4 23 27;B7 13;C3 30;B3 4 0 65;A3 14 6 32 0;B4 0 16 11;A1 39 50 64;B7 16;C3 52;D13 24 24 32 31;D13 25 37 32 33;A2 23 18 28;B2 16;A2 16 25 33;B7 16;B3 0 0 34;B2 21;A6 47 21&&C0;B1&&{ D13 21 0 32 19;D13 10 42 32 40;D22 29 35 46 39;};D23 14 1 62 42;D12 34 43 53 44;D12 22 20 32 25;D22 0 $((N1+8)) 51 32;D13 4 8 41 6;D12 26 28 35 34;D13 27 29 36 35;A2 27 32 39&&{ B2 19;A2 33 33 40;B2 20;B6 19 20 3;};C2 36;D23 33 34 42 37;B1&&D23 35 45 55 46;D23 32 31 43 38;D12 36 47 32 48;D13 20 42 32 41;D13 37 2 48 43;D13 4 5 32 1;D13 4 3 60 5;D12 26 48 49 49;B3 4 22 57;A1 26 46 56;B7 22;B3 0 0 58;C3 47;D22 4 4 50 0;D12 4 51 32 53;D23 22 9 37 7;A7;C2 2;} 2>/dev/null|pbcopy;exit 2>&-
Copy the selected text to the Clipboard by pressing the key combination command-C.
8. Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Click anywhere in the Terminal window and paste by pressing command-V. The text you pasted should vanish immediately. If it doesn't, press the return key.
9. If you see an error message in the Terminal window such as "Syntax error" or "Event not found," enter
exec bash
and press return. Then paste the script again.
10. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know the password, or if you prefer not to enter it, press the key combination control-C or just press return three times at the password prompt. Again, the script will still run.
If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
11. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, there will be nothing in the Terminal window and no indication of progress. Wait for the line
[Process completed]
to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report what happened. No harm will be done.
12. When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
At the top of the results, there will be a line that begins with the words "Start time." If you don't see that, but instead see a mass of gibberish, you didn't wait for the "Process completed" message to appear in the Terminal window. Please wait for it and try again.
If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
13. When you post the results, you might see an error message on the web page: "You have included content in your post that is not permitted," or "You are not authorized to post." That's a bug in the forum software. Please post the test results on Pastebin, then post a link here to the page you created.
14. This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
Copyright © 2014 by Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Use Agreement for the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed.
Maybe you are looking for
-
Major Problem with Phone Line and Support.
Well my problem started about a month and week ago. The problem is that my phone line is messed up. My line drops out unexpectedly and I cant receive calls or send calls. If it does work then the phone only rings for half a second 3 times. If you don
-
hey i have so me on my account and my dad wants me to switch over to his iTunes. so would my money transfer or would i just have to buy as much stuff as i can if it doesn't.
-
Trouble with a group by expression.
I have a fairly simple select statement from which I am pulling two tables worth of data into one output which later gets put into a cursor for export to java. I need to be able to group by one column and I get a 'not a group by...' statement. I coul
-
Urgent: Getting Exception while starting OIM in Weblogc
Hello, While starting OIM (9102 BP15) over weblogic, i see this exception in the logs. What could be the issue ? ####<Dec 8, 2011 4:47:26 PM PST> <Error> <HTTP> <hostname> <OIM_SERVER1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default
-
Extra spacing between words in a line when an icon is inserted
Why do i see extra spacing between words in a line when an icon is inserted. Can someone please help me fix this issue as this is affecting readability?