Yosemite not recognizing .jpg from Canon 9000F Mark II

Since upgrading to Yosemite, when I scan a photo with my Canon Canonscan 9000F Mark II, the file is not recognized as a .jpg file, either in preview or Photoshop. Has anyone seen this and know an answer?
Thanks.

It also does the same thing for me. Same scanner, using Yosemite, the resulting .jpg file results, when trying to open it, in an error that says, "It may be damaged or use a file format that Preview doesn't recognize." There is no new driver for the scanner, and what about Yosemite would cause it not to recognize a .jpg file anyway?

Similar Messages

  • IPad SD card reader not reading JPGS from Canon 5dIII

    Have a brand new iPad (retina) and the SD to lighting connector.
    When I insert a Lexar Professional 16GB 400x SD card with images from my Canon 5DIII, iPad opens the Photo app and I can see the thumbnails, however when I try to import, instead of a green icon with a check mark, I get a red one with an exclamation point (an error). The photos are not imported.
    I used the same SD card in my Canon G12 and images from that camera import just fine. When I reduce the resolution on the 5DIII, the images import fine.
    I have read there is a 32GB limit on the size of teh SD card, but I suppose there must also be a limit on individual file sizes as well. If so, I cannot find it documented.
    Does anyone know if this is the case?

    In the past I've copied MP4 films via an SD card with the kit and been able to play them, but a film bought from iTunes didn't play (you can't copy content to the Videos app via the kit, only to the Photos app). Also the kit only recognises content that is in a particular format - the card has to have a DCIM directory off its root, with the photos/videos underneath it with filenames exactly 8 characters long (no spaces) plus file extension.

  • Bridge CS5.1 not recognizing RAW from Canon 5DM3...

    Hello All,
    I'm having difficulty with Bridge CS5.1 recognizing RAW files from a recently aquired Canon 5DM3.
    I've downloaded the 6.7 patch and ran the adobe installer (which gave no error), rebooited the Mac, ran subsequently "purge cache" under "tools", and still no avail.    The blank icon persist, "Camera Raw Options" continues to be unavailable, and cant find where the RAW data files are/were (compounding this problem is that macs and adobe are new to me).
    I realize that this issue has been previously addressed, but following some of these suggestions, I still can't get the patch to work. Any suggestions and comments will be most appreciated.

    Like Curt stated, in PS go to menu Photoshop / About Plug ins / Camera raw. This brings a window showing the correct version number of Adobe Camera Raw (it should state 6.7 and only one version visible.
    On you system it should be in this location:
    In Finder use column mode and click on your disk with the system on it (normally it shows 4 folders: Library , Users , Applications and System) Click on Library and follow this path / Application Support / Adobe / Plug-Ins / CS5.1 / File Formats. Inhere should be only one file called "Camera Raw.plugin"
    If you click on this file the info next to it should show the version number, in your case 6.7

  • PSE 10 not recognizing files from Canon 6D

    I have PSE 10 and just purchased a Canon 6D.  PSE 10 will not open any of the files.  Everywhere I have looked gives updates for Lightroom and CS, but I have not seen anything for Elements.  What do I need to do?

    Your choise is to update to Elements 11 (and ACR 7.x) or convert the 6D files using the free DNG Converter which will allow you open the DNGs in Elements 10.

  • Aperture 3.0.3 does not import videos from Canon 5D Mark II!

    Hi
    I have photos and movies in one memory card. If I import from the camera into aperture 3, only the photos but no movies are imported. Why?
    Thank you for your advice!

    Last time I had this, I did this for a solution:
    http://discussions.apple.com/message.jspa?messageID=11188017#11188017
    HTH
    wok4

  • Images from Canon 7D mark 2 will not open in Photoshop CS6

    Images from Canon 7D mark 2 will not open in Photoshop CS6

    Hi Ferdinand12345,
    Cannon 7D mark II has been included in the ACR 8.7. I would advise you to wait for the 8.7 camera raw to release.
    In the meanwhile you can go to labs.adobe.com and download the 8.7 DNG converter and convert the files to DNG and then try to import.
    Thanks

  • HT3825 How to view RAW from Canon 5D mark III for OS 10.6

    To 'Preview' RAW files from Canon 5D mark III, it is known that you need to install the Digital Camera RAW Compatibility Update 3.12 , but it can only be used with iphoto 9, which in turn only work in OS 10.7, so there is no way for 10.6 users to 'Preview' the RAW files? Please help if you no any other ways, thank you!

    Which Adobe program?
    Which version?

  • Images files not recognised from Canon 5D Mark III

    iPhoto will not recognise any files from my Canon 5D Mark III. I have tried everything - updated all software, purchased the newest version of iPhoto, formatted the memory card, used a different cable, tried a different memory card. Tha battery is also fine
    I really have no idea what is going on. I have just upgraded from a Canon 5D Mark II and I never had any problems before.
    Any ideas?

    Is the memory card recognized if connected to the Mac with a card reader, built-in or external? 
    Have you applied this updater: Digital Camera RAW Compatibility Update 3.12?
    OT

  • Lightroom 4.2 will not import from Canon 5D Mark III

    When trying to import photos from my Canon 5D Mark III into Lightroom 4.2, the import usually freezes up at some arbitrary point.  It will either crash lightroom altogether, or it will have a message saying "could not import all files, files could not be read."  (something along those lines.)
    I am using a 1 year old iMac with a 1 TB HD.  I import directly onto that hard drive.  Lightroom has never had an issue importing.  My previous camera was a Canon EOS T1i.  The problems started when I purchased my 5D Mark III.  Images from my T1i, in fact, still import fine with no issues.  I am running OS X version 10.7.5.  My compact flash card is brand new, a Lexar 1000x.  This question/issue may have been answered elsewhere, and if so I apologize, for i could not locate it.  I have seen some suggesting it may be a hard drive issue, however, the evidence points to the 5D Mark III not playing well with LR 4.2.  (T1i images still import fine.)

    Here's a post concerning 5D MKIII file corruption, which may also be due to a camera malfucntion. Yes, there could be something wrong with your camera.
    http://forums.adobe.com/message/4882852#4882852
    SUGGESTION:
    Install the Canon EOS Utility that came with your camera. Also check for an updated version of the EOS Utility after the install. You need to install from the CD first before you can install any updates.
    http://www.usa.canon.com/cusa/consumer/products/cameras/slr_cameras/eos_5d_mark_iii#Driver sAndSoftware
    If the EOS Utility can download the CR2 files to your hard drive, then your camera is not defective.

  • Does not import from Canon 7D Mark II?

    Is there an update to Elements 12.2 that will allow importing pictures from a Canon 7D Mark II?

    Here's a post concerning 5D MKIII file corruption, which may also be due to a camera malfucntion. Yes, there could be something wrong with your camera.
    http://forums.adobe.com/message/4882852#4882852
    SUGGESTION:
    Install the Canon EOS Utility that came with your camera. Also check for an updated version of the EOS Utility after the install. You need to install from the CD first before you can install any updates.
    http://www.usa.canon.com/cusa/consumer/products/cameras/slr_cameras/eos_5d_mark_iii#Driver sAndSoftware
    If the EOS Utility can download the CR2 files to your hard drive, then your camera is not defective.

  • "Preview not available" for raw Canon 5d Mark III files

    Please help.  I can't seem to get my mac to import my raw files from the first wedding I shot last weekend with my Mark III. All my jpgs are fine, just can't seem to import the raw. I've downloaded the 4.1 update and still the same issue.

    Canon 5d Mark III is not supported as of now by Adobe Camera Raw
    Check this for suppoted list of cameras : http://helpx.adobe.com/creative-suite/kb/camera-raw-plug-supported-cameras.html
    --Baljeet

  • Having issues opening raw files from Canon 5D Mark iii in Photoshop CS5

    I cannot open RAW files from a Canon 5D Mark III in Photoshop CS5. I get an error saying "
    Could not complete your request because the file appears to be from a camera model which is not supported by the installed version of Camera Raw.
    Please visit the Camera Raw help documentation for additional information."
    Documentation seems to be no help.
    Any ideas?

    You can download the updates manually and try to install them Adobe - Photoshop : For Macintosh
    If you can not get CS5 updated you may want to consider  Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6
    Search Results
    1 (800) 833-6687Adobe Systems, Customer service

  • Low quality export for stop motion animation stills from Canon 5D Mark ii

    Thank you very much beforehand to anyone who is willing to look through this issue, it's been a long and frustrating process so far...
    I am attempting to put together a stop motion animation in Final Cut Express but my exports are always either low quality, or medium quality and stretched. I am shooting on a Canon 5D Mark ii set to take pictures at 21M 5616x3744 [999] (though I'm not entirely sure what the 21M or 999 mean).
    When I first assembled my stills (unedited or altered in any way) and exported, it looked like this:
    A relatively drastic loss in colour and quality. This was achieved exporting through quicktime conversion using the following settings:
    Compression Type: H.264
    Compressor Quality: Best
    Size: 1920x1080 HD
    Preserve aspect ratio using: Crop
    Deinterlace source video: unchecked
    Unhappy with the result, I went through hours of testing and researching which only yielded a result after I discovered the control-Q Easy Setup menu. I tried setting up as an apple intermediate codec using HDV-Apple Intermediate Codec 1080i60 at 29.97 fps. I kept the export settings the same as above, but knowing that I was now working with a canvas that keeps to the 16:9 proportions, I tried cropping one of my stills in photoshop to fit that 16:9 ratio.
    I then imported my 16:9 cropped still and an unedited JPEG version from my camera and exported the resulting 10 second video. The result was better quality, but still noticeably degraded from the original stills. More importantly, both the cropped 16:9 and the unedited JPEG were stretched out of proportion as seen below (16:9 version):
    Of course I forgot to note the original settings on Easy Setup so I can't figure out how to get back to the original lower quality, yet undistorted image (not that I want to do that). I tried numerous different sizes for the export including changing the Crop (when necessary) setting to letterbox. Nothing worked.
    The canvas, however, immediately looked 100% better after switching the Easy Setup to HDV-Apple Intermediate Codec 1080i60 at 29.97 fps. It held the improved quality without distorting the image:
    I'm not sure if there's any hope of having a great image quality, but at very least I would like to be able to export at the decent quality of the second screenshot without the stretching and cropping.
    I need to have this resolved ASAP for work, I've already wasted too much time here. Any help is so appreciated, I'll be active in providing whatever additional information that I can to responders, though please keep in mind that I'm relatively new to all this, I don't know where to find everything

    I've decided just to try to get back to the export that I showed in the first screenshot. That result came before I started tampering with the Easy Setup. Like I said, when I changed the setup the canvas quality improved drastically and the dimensions seemed to fit much better, but the export was vertically stretched and cropped. I just reset my FCE settings and it turns out the default setup is DV-NTSC, but it's giving me a terrible quality still...
    I just want to get back to that second screenshot's quality.. Could someone suggest what I should switch the easy setup to for importing stills from my Canon 5D Mark ii to yield the right results?

  • Corrupted Images from Canon 5D Mark iii

    Hey guys... I'm new to forum with this being my first post. I have been shooting for a few years now and have never encountered this issue. I'm not finding any help either on the web as hot to resolve this issue either.
    When my Hoodman Steel 32GB CF card is in the card slot on the camera, the images look fine in preview mode. When I transfer them to my hard drive and look at the thumbnails on my Mac cpu the images look fine. It's when I try and open them with Camera Raw, Photoshop, Lightroom or any other photo editing software do they end up looking corrupted. Here are a couple of screenshots of how they are looking upon importing.
    Any help to recover these images would be greatly appreciated. Thanks in advance and I look forward to sharing photography stories and shots in the future.
    Ryan
    | Canon 5D Mark iii | Canon 70-200mm L series | Canon 16-35mm L series |

    ebiggs1 wrote:
    Ryan,
    I imagine those are lost.  The CF card looks like it is corrupted.  I never heard of or have used that brand of CF card so I have no idea of its quality.
    I suggest you get Sandisk or Lexar.  Also format it before each important shoot each time.  I also prefer 16GB cards.
    It is possibile your computer did the damage so you might try a different computer.  Showing a photo on the camera's LCD monitor is no indicatition.
    Thanks for the comments... I was actually able to retrieve them. I had recently updated to Yosemite and low and behold, that apparently was the culprit. I downloaded the new EOS 3 Utility that is reported to work with Yosemite and transfered the images straight out of my camera to my hard drive. Once I opened those images in Camera Raw everything checked out just fine. I'm guessing my card reader isn't compatible with Yosemite. Thanks again for responding.

  • Unable to open CR2 RAW file from canon 5D mark III

    Installed cs6 which seemed to be working just fine until I attempted to open a CR2 file from a canon 5D Mark III, will not open, checked for RAW updates, nothing.

    Hello, you will need to install Camera Raw 7.1 RC available in the labs: http://labs.adobe.com/technologies/cameraraw7-1/

Maybe you are looking for