Yosemite Notification Settings Reset After Reboot

I searched this issue and couldn't find a similar question. This makes me wonder if I am doing something wrong. On each of my five computers running Yosemite (brand new and older Macs) after I reboot, all of my preferences for the Notification center go back to default settings. So if I say Facebook should not be in the Notification center and I deselect any banners or alerts, etc., as soon as I reboot, BAM! Facebook is right back there in the Notification center notifying me like there's no tomorrow. This is mostly annoying (unlike my wifi issues!!!), but I'm pretty sure the settings should stay put.
Any thoughts?

Hi there JAS_66,
It looks like the OS X 10.10.1 update addresses this issue. Take a look at the release notes below for more information.
About the OS X Yosemite v10.10.1 Update
Addresses an issue that could cause Notification Center settings to not be retained after a restart
-Griff W.

Similar Messages

Calendar Settings reset after reboot

Hi,
Could anybody please check if you have the same issue on your phone?
Sony Calendar resets settings after reboot.
For example, if I set "Week starts on" = "Monday" and reboot the phone, this settings will be back to "Sunday" (which is the default).
I am now running Calendar 20.0.A.2.5, but I believe this bug was there before as well (even on my old Xperia V, I believe)
P.S. I found this topic, but either I didn't understand the solution correctly or it doesn't work for me... I tried to disable the Calendar app, but it didn't help in any way...
Solved!
Go to Solution.

I will forward this internally for further investigation. I will update you as soon as i have more information.
But as a possible workaround, i suspect you have selected a country/region under Settings -> Language & input -> Language where the week normally is set to start on Sunday like English US? If you are in the Netherlands but want the phone on english you could try setting it to English UK instead to avoid this until i have more information.
- Official Sony Xperia Support Staff
If you're new to our forums make sure that you have read our Discussion guidelines.
If you want to get in touch with the local support team for your country please visit our contact page.

MSI Control center windows 8.1 fan settings reset after reboot.

I wanted to see if anyone has any information about this. I have a z77a-gd65 motherboard running windows 8.1 and I have saved profiles for cpu fan and sys1/sys2 fans. After reboot the fan curves get reset to factoy defaults.
I didn't have this problem with windows 7 and am running the latest version of Control Center.
Is there a fix for this? Thanks in advance.

I actually did find a response from MSI in a random query.
They said, 'CC is used for temporary changes, use the bios'.
Which I can see the validity of that statement, but at the same time, what if you want to adjust things to a finer degree than the bios and want it applied after restart?
I know you can save and load individual pages of the Command Center, but still..
I do find it VERY irritating I can't set fan speeds lower than 50% for the System Fans. (or is there a way to do this?)

Hot Corner Settings reset after reboot

Hi,
my settings for the hot corners are reset to default (that is nothing) every time I reboot my mac. I have no idea why this is so. Any suggestions?
Thx
JaTo

OOPS! MY MISTAKE, SORRY!
I think those are stored in the com.apple.dock.plist file in Preferences. If you trash it you will lose your Dock settings also. Worth a try though.
Actually moving it to the desktop is a better idea. Then if it is not a solution you can always move your original dock file back and relogin.
There is also a possibility the info is stored in com.apple.finder.plist but I am not sure.
Message was edited by: Gnarlodious

10.6.7 - Audio Settings Reset after reboot & plist missing

Hey all,
I have a mac pro and I'm having an odd issue similar to http://reviews.cnet.com/8301-13727_7-10412664-263.html.
I set my settings on the sound preferences. Once I reboot the sound setting resets. It seems to be a preferences issue and as the article states its' located here:
Macintosh HD > Library > Preferences > Audio
The files will be:
com.apple.audio.DeviceSettings.plist
com.apple.audio.SystemSettings.plist
Unfortunately, I'm unable to locate these files for whatever reason they are long longer on
Macintosh HD > Library > Preferences > Audio or <home directory> Library > Preferences > Audio.
I thought it was find i'll just move it from the new macbook pro with 10.6.7 but that computer also doesn't have these files anymore.
Question:
Where are these files

SU wrote:
Hey all,
Macintosh HD > Library > Preferences > Audio
The files will be:
com.apple.audio.DeviceSettings.plist
com.apple.audio.SystemSettings.plist
Unfortunately, I'm unable to locate these files for whatever reason they are long longer on
Question:
Where are these files
On my computer, those 2 plist files are right where you indicated. Are you sure you looked in the right place? Did you use spotlight to search?

Settings reset after reboot of device

Well, I found out today that when I reboot my device the normal way (volume down and sleep/wake), my device totally reverts it's settings. This is includes music settings, to my wallpaper, to accessibility.
What's interesting is it's stuck on my settings I had prior to the 1.1 update..so it has sound check on, the zen sand wallpaper I chose, the equalizer I chose, everything.
Anyone else get this or is this another bug?

You would have to drag them back onto the nano from your library. If you have tracks you got from other libraries, you would have to get access to those libraries again to drag them over.
i

Disabling E-mail notifications not working after reboot

Hello. It seems that the mail notification and the mail count still persist even if I have it disabled on the settings after rebooting. I've checked the settings after reboot and it is still set as disabled (after following the guide), but the notifications still appear. Is this an bug on the on the app that needs to be fixed? Or am I missing something? Thanks.

I've had a number of problems with the Playbook not recognising the settings I've chosen. In this case, with disabling email notifications, it resets after each reboot.
I've found that if I go into my the Messages app, and then into Message Settings, it shows that alerts are set to be off (display message count, and display new message indicator). The fix for me is to enable alerts, go back to main app screen, then go back into settings and disable alerts once more. At that point the settings seem to stick. So whenever I reboot the playbook, I just have to do that and notifications will remain off until the next reboot.
Let us know if that works for you too. Maybe it will help the engineers figure out what's wrong.

ITunes settings lost after reboot

I have a problem where after a reboot the settings of iTunes are back to default. For example:
it loses the account for the Store (I have to re-enter email address and password);
it loses the wifi sync settings for my devices
it shows the iTunes tutorials screen, as if I'm starting iTunes for the first time
settings under preferences are lost
Other things are not lost:
the library is still there;
iTunes remembers the devices (when connecting it is handled as a known device) and knows what playlists/apps/.. to sync with it.
Since I'm not rebooting my Windows 7 PC a lot, the problem is not occuring a lot, it doesn't keep me from using iTunes, it is just annoying. Now after rebooting I decided it's enough and I would post the issue (since I can't seem to find a comparable issue).
Also worthwile noticing is that the problem is already there for some time, though I can't exactly pinpoint anymore when it started. Possible when iTunes 9 or 10 were realeased.
Now I'm using:
Windows 7 64-bit (completly up to date)
iTunes 10.5.2.11
Thanks for any help!

Router>sh ver
Cisco IOS Software, 1841 Sofware (C1841-IPBASE-M), Version 12.4(7d), RELEASE SOFTWARE (fc2)
ROM: System Bootstrap, Version 12.4(13r)T, RELEASE SOFTWARE (fc1)
Router uptime is 34 minutes
System return to ROM by power-on
System image file is "flash:c1841-ipbase-mz.124-7d.bin"
Cisco 1841 (revision 7.0) with 114688/16374K bytes of memory.
Processor board ID FCZ1251943K
2 FastEthernet interfaces
1 Channelized (E1 or T1)/PRI port
DRAM configuration is 64 bits wide with parity disabled.
191K bytes of NVRAM
31360K bytes of ATA CompactFlash (Read/Write)
Configuration register is 0x2142
Router>

Hyper-V 2012 R2 - Linux Guest VLAN Settings lost after reboot

Hi Guys,
last night a have seen a strange behavior with a Sophos UTM 9.204020 Linux Guest VM. (This VM is based on SUSE SLES v11? i think)
So i have Setup this in my home lab and experienced the same problem.
----Setup-----
2 External VM Switches
Management OS is on VLAN 4093 with IP 192.168.20.1
The guest network adapter is in Trunk Mode, VLAN Tag (4093) is set in the guest OS with IP 192.168.20.100
Everything works until you kick off a reboot from the guest or hyper-v console, after the reboot you loose the connectivity on the network adapter with the vlan trunk.
If you shutdown the guest and start it everthing works again - this happens only on reboot!!
I have tried diffrent things (static mac, enable disable hardware features (vmq/offloading etc) on the vm network adapter but always the same error.
After some search on the net i have found this article: Link
This guy has the same problem with another linux vm (based on debian) his workaround was to trigger a powershell script with the eventlog after reboot of the vm, this works for me too but this must be bug?
Has anyone else experienced this problem?
André

Hi Andre,
I would suggest you to install the supported Linux guest OS on hyper-v , please refer to following link:
http://technet.microsoft.com/en-US/library/dn531030.aspx
Best Regards
Elton Ji
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Wacom Intuos4 tablet settings keep resetting after reboot

I am not sure if anyone else is seeing this but on my fresh install of 10.6, I installed the latest drivers for my Wacom Intuos4 tablet and every time I reboot, the configurations are reset to defaults.
I've also noticed that when I go into the Wacom preference pane in System Preferences, along with other preference panes (like Growl, for example), I have to restart the System Preference app.
Is anyone else experiencing similar issues?

This is a known issue with the current Wacom driver and it will have to be fixed by them in an update. In the meantime, you can make the preferences save by quitting System Preferences after changing any tablet settings and then reopening the Wacom prefpane in System Preferences and closing it again.

After iTunes Update (10.3) mouse and keyboard settings reset after every system reboot

Since I updated to the iTunes version with cloud support (after Jobs' Keynote where the iCloud was introduced) my mouse and keyboard settings (see image) are being resetted on every system reboot.
image: this is how I want my settings, but they're resetted to system standard when I reboot my MBP
I don't know if there is a connection between the update and the resetted settings.
Does anyone know a solution to fix this problem?
Thanks
Kris

I solved it clearing PRAM and booting in safety mode as written in this article:
http://www.macwelt.de/artikel/_Ratgeber/361904/troubleshooting_tipps_fuer_leopar d/1 (DE)

Donwload settings always reset after reboot firefox

as long as I restart my firefox4, the download settings automatic switch to always ask the place I want to save, not save file to a specific folder I specified.

Hi...
Try Resetting your Mac's PRAM and NVRAM
If that didn't help, since your Mac was purchasd last October, it must be running Lion v10.7 and it's still under the one year warranty.
Try using Lion Recovery to repair the startup disk or reinstall the Mac OS X.
If nothing above helped, take your Mac to an Apple store or Apple certified repair provider.
You can make a reservation at a Genius Bar in advance.

ITunes resets after reboot

This has been going on for quite sometime now, but I finally decided to do something about it. My iTunes use to work perfectly, but at some point in time it began to reset itself after I rebooted my computer. What I mean by this is now after I boot my computer up each time and decide to open up iTunes it now prompts me to go through and set the basic settings for the utility like it would after an install. Things like "primary media player," and so forth. The settings that I have set in options and in preferences remain the same for the most part, except about once every other week the program completely resets and I have to set all my preferences and options once again.
I work in I.T. so I like to consider myself a little knowledgeable on subjects like this,but I honestly don't know why this is acting up on my system. I have tried updating to the latest version, uninstalling and reinstalling, making sure the program isn't blocked or modified by other programs, and so forth. Any help with this would be greatly appreciated.

This should be fixed by reinstalling iTunes.
Otherwise, you might want to consider a free alternative such as these http://ipodmanagers.blogspot.com

When dual-booting with Windows 7, Mac OSX time settings reset every reboot.

I have recently installed Windows 7 Professional on my mid 2010 MacBook Pro via BootCamp (Running Mavericks BTW). Everything runs grean and have not experienced any problems on the Windows side, but I have a problem with Mac OSX now. When I am using Windows 7, and I reboot into Mac OSX, I find that my time settings are wrong. It seems like my time zone has changed, because the date is correct, as well as the minutes, but the hour is always wrong. When I go to Date & Time in System Preferences, and my time zone is correct, but I still have to chage the hour in the time. Any ideas as to why this is happening and how to stop it would be greatly appreciated.

If you dual boot your Windows PC with OS X or Linux, you may have experienced a problem in which your clocks reset themselves incorrectly every time you boot into Windows. Here's a simple registry edit to fix that.
Essentially, the incorrect clock setting happens because OS X and Linux use GMT time while Windows tries to synchronize with your local time zone, getting confused when you reboot between the two. Apple's own Boot Camp drivers for Windows are supposed to fix this problem, though some users have noticed that it still happens even with the drivers installed, and some Linux users are left out in the cold. Furthermore, if you have a Hackintosh, you can't install the Boot Camp drivers, so you'll need to find another way around the problem.
To fix it, just hit Start and type regedit.exe in the search box. Hit Enter and navigate to HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\TimeZoneInformation. Right click anywhere in the right pane and hit New > DWORD (32-bit) Value. Name it RealTimeIsUniversal, then double click on it and give it a value of 1.
Lastly, reboot into OS X, then reboot back into Windows. You should now notice that your clock actually displays the correct time.

Personal settings resetting on reboot

I've had my macbook for about a month now, and for the past couple weeks everytime I reboot some sort of setting would get reset to default. At first it was my firefox homepage, then my adium settings, then my dock. All of which, while annoying, weren't really big deals.
But now everytime I restart my parallels virtual drives are corrupting. This is a critical problem for me since this is my work computer and half of my apps are run on windows, half on mac. This has happened the past 3 days I've come into work, and each day I've had to uninstall/reinstall parallels, reinstall windows xp, and reinstall all my apps... not fun and takes me out of working capability for 2 hours or so.
Any idea why this might be happening? We are upgrading to leopard soon, but thats a company decision, not mine.
Thanks

Hi, and welcome to the forums!
I strongly suggest you do these 2 things in order forst, then report back.
Using Disk Utility in Mac OS X 10.4.3 or later to verify or repair disks...
http://docs.info.apple.com/article.html?artnum=302672
About Disk Utility's Repair Disk Permissions feature...
http://docs.info.apple.com/article.html?artnum=25751

Yosemite Notification Settings Reset After Reboot

Similar Messages

Maybe you are looking for