Yosemite problems with double click dock commands and keyboard shorcuts

I have a mid 2012 macbook pro 17", i recently installed Yosemite although it fixed my internet problem (connection dropping randomly) now i am having issues with opening apps and files. Double clicking on a file launches the corresponding app but does't open the file i just get and message stating the app is not open anymore if click the file again. Finder keyboard shorcuts such as command+Q don't work. Can't access some menu items such as "about this mac". Dragging a file into the dock icon launches the app but doesn't open the file either.
I have no idea what's causing this. anybody got a clue or having similar problems
Thank you

Same problem here. (Yosemite 10.0.1)
the mouse is a 'team scorpion g-reaver' http://teamscorpion.net/ts2014/g-reaver_1.html
It's work perfectly on the pc of my brother (he uses windows).
It's a clean install...
And has a funny fact... The Left Button was with this problem... So what I did? I changed the primary mouse button to the Right... Worked ok for almost 1~2 days... After that, the two buttons showed the double-click problem....
But, I repeat, the mouse works perfectly in the windows of my brother '-'

Similar Messages

Unable to close open apps with double clicking the button and when I tap screen does not respond?

Cannot not close open apps with double clicking the button Since downloading iOS8.

What happens when you try? Does double clicking the ?home button bring up the Task Bar of recently used apps? If so what happens when you flick up on the preview screen for the app you want to close?
To quit an app double click the Home button to reveal the row of recently used apps. Flick up on the page preview and it will fly away and disappear. That quits the app.

Problem with double click in alv interactive report

Hello frnds,
        the problem is i am displaying basic list using grid display with pf-status and usercommand forms. My first column is checkbox, after selecting checkboxes if i click on the pf-status Button then in the internal table corresponding field is not getting updated with value 'X'. But once if i double click on the basic list after selecting the checkboxes the values are reflecting as X in the internal table . But my requirement is i want to get the values to be populated once i click on push button only ?
fcode i have used is &IC1( which is the fcode to trigger double event).Please help me out.
Thanks in advance.
subash.

hi ,
i had used like this .. it is working...
*&      Form USER_COMMAND
FORM USER_COMMAND USING R_UCOMM LIKE SY-UCOMM
                        R_SELFIELD TYPE SLIS_SELFIELD.
clear : v_flag.
CASE R_UCOMM.
    WHEN 'DATA'.
LOOP AT IT_TEMP.
     if it_temp-checkbox = 'X'.
          v_flag = 'X'.
          v_pernr1 = IT_TEMP-PERNR.
*--Get compensation data and populate final internal table
          refresh it_fin.
          CALL FUNCTION 'Z_HR_COMP_STATEMENT'
            EXPORTING
              PERNR = v_pernr1
              BEGDA = s_date-low
              ENDDA = s_date-high
            TABLES
              FINAL = it_fin.
          if not it_fin[] is initial.
            delete adjacent duplicates from it_fin comparing pernr.
            read table it_fin index 1.
            move-corresponding it_fin to it_final.
            append it_final.
            clear it_final.
          endif.
        endif.
     enddo.
ENDLOOP.
      if not v_flag is initial.
*------ display final data
        PERFORM final_display.
      else.
        message s000 with 'Select atleast one pernr'.
      endif.
endcase.
ENDFORM.                    "USER_COMMAND
regards,
venkat.

Problem with Left Click (mighty mouse) and flash content

Hi, first sorry for my bad english...
Well I have an issue with the left click (i have mighty mouse) and flash content in Firefox:
if i'm using Firefox and then change to any other app, when i get back to firefox i have no left click anymore...
So i have to open the mouse setting panel and everything works fine again...
I don't want to open the mouse panel over and over again to fix that, so what i can do?
THANKS in advance =)
I uploaded a video to show the issue:
http://www.youtube.com/watch?v=ROWSod5fUjk
Mighty mouse Settings:
Left Click + Right Click
Firefox ver: 3.5.5
Snow Leopard: 10.6.2
iMac 24" (iMac9,1)
Message was edited by: MaLk Gopher

Hi, Guys!!
And you have some right cosmic_hippo , Why?
Well think that the real problem it's something between Firefox and Flash content...
because if i use Safari and i try make what i describe in the first post, i don't have any problem with the mouse settings.
Only Happens when i use Firefox...
Cheers.
Well the issue is still there...

Data Acquisition problem with multiple length of commands and data received.

Hello,
I need to write a program to communicate with a Data Acquisition board. There are about 10 commads and each has a different number of bytes associated with it. For example command-1 has 4 bytes which need to be send to the DAQ, command 2 has 6 bytes, Command 3 has 4 bytes etc...
When the board responds back to the commands I send, it responds back with different number of bytes for each command. For example, When Command 1 is send to the board, it responds back with 3 bytes of data, whereas when command-2 is send it responds back with 5 bytes of data.
Each data byte received by my labView program from the board, needs to be displayed after some processing has been done. This processing may or may not happen on all the bytes of data got back.
I want the program to be scalable, so that if more commands are added later on, the display and the processing changes in accordance with that.
What will be the best approach for such a system ? I want the system to be dynamic, and dont want to repeat or re-write the code for each case statement ( case statements will be decided by the commands).
Any input is welcome.
Thanks,
birapxi

Hello Dennis,
That is certainly one way of doing it, but it is the brute force method. Is there any way to use clusters and add the data bytes coming in and going out to clusters. Also when the user sends a specific command out, can I use the unbundle by name function to send the bytes corresponding to that command.
For displaying the data received, can I follow a similar approach and use unbundle by name function to just display the specific data bytes for the command i have received.
Thanks for your input,
birapxi

Problems with Kernel 2.6.31 and keyboard layout

Hello!
After upgrading my system with pacman -Syu I had lots of trouble!
1. New gdm ignores my fluxbox windowmanager! After severall reboots it worked suddenly: Don't know why!
I urgently missed gdmsetup!
2 xorg ignores my keyboard settings! I configured xorg.conf and /etc/hal/fdi/policy/10-keyboard.fdi. But no effect!
<?xml version="1.0" encoding="ISO-8859-1"?> 
<deviceinfo version="0.2">
<device>
<match key="info.capabilities" contains="input.keymap">
<append key="info.callouts.add" type="strlist">hal-setup-keymap</append>
</match>
<match key="info.capabilities" contains="input.keys">
<merge key="input.xkb.rules" type="string">base</merge>

<merge key="input.xkb.model" type="string">keyboard</merge>
<match key="/org/freedesktop/Hal/devices/computer:system.kernel.name"
string="Linux">
<merge key="input.xkb.model" type="string">evdev</merge>
</match>
<merge key="input.xkb.layout" type="string">de</merge>
<merge key="input.xkb.variant" type="string">nodeadkeys</merge>
<merge key="input.xkb.options" type="string">terminate:ctrl_alt_bksp</merge>
</match>
</device>
</deviceinfo>
Section "ServerLayout"
Identifier "X.org Configured"
Screen 0 "Screen0" 0 0
InputDevice "Keyboard0" "CoreKeyboard"
EndSection
Section "Files"
ModulePath "/usr/lib/xorg/modules"
FontPath "/usr/share/fonts/misc"
FontPath "/usr/share/fonts/100dpi:unscaled"
FontPath "/usr/share/fonts/75dpi:unscaled"
FontPath "/usr/share/fonts/TTF"
FontPath "/usr/share/fonts/Type1"
FontPath "/usr/share/fonts/local"
FontPath "/usr/share/fonts/util"
FontPath "/usr/share/fonts/OTF"
EndSection
Section "InputDevice"
Identifier "Keyboard0"
Driver "kbd"
Option "XkbRules" "xorg"
Option "XkbModel" "pc105"
Option "XkbLayout" "de"
Option "XkbVariant" "nodeadkeys"
EndSection
Section "Screen"
Identifier "Screen0"
# Device "Card0"
# Monitor "Monitor0"
DefaultDepth 24
SubSection "Display"
Viewport 0 0
Depth 24
Modes "1024x768"
EndSubSection
EndSection
Though "setxbdmap de" was working I downgraded to the previous kernel and gdm version!
I think testing cycle for new versions is definitely to short, or did I make serious faults!
Greetings Johannes

I sort of had this problem for a while in a rescue usb drive I have, I couldn't make it work properly, but as root all was well (xfce was also acting a little strange as a user).
I just renamed the user home, deleted the user and created a new account, all fresh, just copied back some configs (firefox and the likes) and all was working well again ... no idea of what happened. I don't use a login manager, I just start xfce manually (it's a rescue drive I want to be able to change xorg.conf before starting X if needed).

Just installed Lion and the Magic TrackPad and I am having a problem with one click commands. I have to hit the pad fairly hard with one finger to get it to accept the command. Is this normal, is there another way that I am suppose to execute commands?

Just installed Lion and the Magic TrackPad and I am having a problem with one click commands. I have to hit the pad fairly hard with one finger to get it to accept the command. Is this normal, is there another way that I am suppose to execute commands?

No you just need to turn on Tap to Click. Go into System Preferences - Trackpad and click the Point to Click tab and select the first box which will say Tap to Click and you should be in business.

Mouse failing to open folders and files with double click.

Mouse suddenly decided not to open anything with double click. It will highlight with single click but will not open files. Could I have a broken mouse? Could a virus be causing this? I have checked the mouse settings under System preferences and made sure my pc-using children have not set the mouse to second-click status. Any ideas?

Check back in system preferences > mouse > Double-click speed. Move the slider to the slower end of the scale.
Regards

HT1473 when ever i am about to add the file i double click on it and the the box with the documents disapears (windows 7)

when ever i am about to add the file i double click on it and the box just dissapears does anyone else have this issue? please help me if you did!

Make sure you are viewing your image at 100%. At smaller views, pixels and layers and the way they interact are approximate interpolations and won't show you the actual pixel-for-pixel changes.

Open file from table with double click

Hi all,
I use adf faces and JDEV 11.
I want to open a file by double clicking on row in a table. (file is stored in the database).
I first tried it with a button to open the file, with this code:
       System.out.println("Double click!");
       BindingContainer bindings = this.getBindings();
        DCIteratorBinding iter = (DCIteratorBinding)bindings.get("XxahelpBezoekRapDocView1Iterator");
        Row row = iter.getCurrentRow();
        FacesContext fc = FacesContext.getCurrentInstance();
        HttpServletResponse response = (HttpServletResponse)fc.getExternalContext().getResponse();
        response.setHeader("Content-Disposition","attachment; filename=\""+row.getAttribute("Filename").toString()+"\"");
        response.setHeader("cache-control", "no-cache");
        try {
            InputStream in;
            in = ((BlobDomain)row.getAttribute("Bijlage")).getInputStream();
            ServletOutputStream out = response.getOutputStream();
            writeInputStreamToOutputStream(in, out);
            fc.responseComplete();
        } catch (IOException e) {
            e.printStackTrace();
        } This is working fine.
Now I wan't to open the file with double clicking on a row.
For opening the file I use the same code in the backing bean and this code on the page:
      <f:facet name="metaContainer">
    <af:group>
        <trh:script>
           goEditRow = function(event) {
                AdfCustomEvent.queue( event.getSource(), "doubleClickOnRow", {}, false);
        </trh:script>
    </af:group>
    </f:facet>And a clientListener and serverListener on the table:
<af:clientListener method="goEditRow" type="dblClick"/>
<af:serverListener type="doubleClickOnRow" method="#{backingBeanScope.backing_pages_EditTicket.doubleClick}"/>The only thing that happens when I double click is that I see "Double click!" in the console. But I can't save the file :S
What is the problem?
Thanks in advance.

Hi
What we do is to pick a table column for downloading the file.
We change the component in the column to the an af:commandLink and add an
af:fileDownLoadActionListener to the command link.
The user clicks on the link to download (open) the file.
Its not exactly the same as what you requested (double
click on the row) but it might be another solution.
Regards
Paul

Plese help me ! can't open files with double clicking icons...

at the first, sorry about my English. (i'm japanese and english is my second language so..) anway.... i can't open the files on desk top by double click. if i go to Finder then i can open files... and some files i can open by double click. i downloaded Limewire but i can't install it because my couble click is not working for that. but i can double click to open photoshop, safari or email or some other things in the dock. and i couldn't open up the games either.. doesn anybody knows what's happened to my son's computer? it's a iMac flat panel G4. and OS X 10.3.9. Thank you sooo much!!

Saw your response and started to write to you for help also but have, with one final try, found PART of my problem. I have a Logitech wired optical mouse that worked with everything except opening desktop volumes when I double clicked on them. I could open applications and documents within the Finder window....just not the desktop volume icons.
I ran Disk Utility........verified all the volumes........repaired all permissions, unplugged mouse and reset. Logitech software is up to date.. I've never had this happen before.
What I discovered was that I was double clicking to open the volumes, but had the mouse set for single click. It's still a little strange because I changed it to double click to open and now it opens with double OR single click. Now I can open the volumes but it won't allow me to move the Finder windows that open. I can't drag or move them on the desktop; have to use them where they open.
Any suggestions for me, I hope? Thanks.

ALV: Issue with double click event after sorting the ALV

Hello Experts,
I have an internal table that populates an ALV grid. When the user doubleclicks a row, my method HANDLE_DOUBLE_CLICK returns the e_row-index value from the ALV Grid. I use this index value to read the internal table, then retrieve additional data.
My problem is the user may sort the ALV grid before double clicking on a line. If this happens my internal table is not sorted to match the ALV grid, so reading the internal table with the e_row-index value returns the wrong information.
When the double click event occurs, is it possible to capture the value in column 1 instead of a value for e_row-index?
There is one more paramter in HANDLE_DOUBLE_CLICK for row id.   It is coming blank in debugging . what is the purpose of this parameter and how i can make use of it ?
Regards
Vivek

Hi,
I am Posting The Code Which Uses Double Click Event.
And This Code will provide the total information to you.
REPORT ZALVGRID_PG.
TABLES: SSCRFIELDS.
DATA: V_BELNR TYPE RBKP-BELNR.
SELECTION-SCREEN BEGIN OF BLOCK B1 WITH FRAME TITLE TEXT-001.
SELECT-OPTIONS: IRNO FOR V_BELNR.
PARAMETERS: P_GJAHR TYPE RBKP-GJAHR.
SELECTION-SCREEN END OF BLOCK B1.
DATA: WA TYPE ZALVGRID_DISPLAY,
      ITAB TYPE STANDARD TABLE OF ZALVGRID_DISPLAY.
DATA: IDENTITY TYPE REF TO CL_GUI_CUSTOM_CONTAINER.
DATA: GRID TYPE REF TO CL_GUI_ALV_GRID.
DATA: L_IDENTITY TYPE REF TO CL_GUI_CUSTOM_CONTAINER.
DATA: L_TREE TYPE REF TO CL_GUI_ALV_TREE_SIMPLE.
TYPE-POOLS: SLIS,SDYDO.
DATA: L_LOGO TYPE SDYDO_VALUE,
      L_LIST TYPE SLIS_T_LISTHEADER.
END-OF-SELECTION.
CLASS CL_LC DEFINITION.
PUBLIC SECTION.
    METHODS: DC FOR EVENT DOUBLE_CLICK OF CL_GUI_ALV_GRID IMPORTING E_ROW E_COLUMN.
ENDCLASS.
CLASS CL_LC IMPLEMENTATION.
METHOD DC.
    DATA: WA1 TYPE ZALVGRID_DISPLAY.
    READ TABLE ITAB INTO WA1 INDEX E_ROW-INDEX.
    BREAK-POINT.
    SET PARAMETER ID 'BLN' FIELD WA1-BELNR.
    CALL TRANSACTION 'FB02'.
ENDMETHOD.                    "DC
ENDCLASS.
DATA: OBJ_CL TYPE REF TO CL_LC.
START-OF-SELECTION.
PERFORM SELECT_DATA.
IF SY-SUBRC = 0.
    CALL SCREEN 100.
ELSE.
    MESSAGE E000(0) WITH 'DATA NOT FOUND'.
ENDIF.
INCLUDE ZALVGRID_PG_STATUS_0100O01.
INCLUDE ZALVGRID_PG_LOGOSUBF01.
INCLUDE ZALVGRID_PG_SELECT_DATAF01.
INCLUDE ZALVGRID_PG_USER_COMMAND_01I01.
***INCLUDE ZALVGRID_PG_STATUS_0100O01 .
MODULE STATUS_0100 OUTPUT.
SET PF-STATUS 'AB'.
* SET TITLEBAR 'xxx'.
IF IDENTITY IS INITIAL.
    CREATE OBJECT IDENTITY
    EXPORTING
      CONTAINER_NAME = 'ALVCONTROL'.
    CREATE OBJECT GRID
    EXPORTING
      I_PARENT = IDENTITY.
    CALL METHOD GRID->SET_TABLE_FOR_FIRST_DISPLAY
      EXPORTING
         I_STRUCTURE_NAME              = 'ZALVGRID_DISPLAY'
      CHANGING
        IT_OUTTAB                     = ITAB.
    CREATE OBJECT OBJ_CL.
    SET HANDLER OBJ_CL->DC FOR GRID.
    ENDIF.
    IF L_IDENTITY IS INITIAL.
      CREATE OBJECT L_IDENTITY
      EXPORTING
        CONTAINER_NAME = 'LOGO'.
      CREATE OBJECT L_TREE
      EXPORTING
        I_PARENT = L_IDENTITY.
      PERFORM LOGOSUB USING L_LOGO.
      CALL METHOD L_TREE->CREATE_REPORT_HEADER
        EXPORTING
          IT_LIST_COMMENTARY    = L_LIST
          I_LOGO                = L_LOGO.
      ENDIF    .
ENDMODULE.                 " STATUS_0100 OUTPUT
***INCLUDE ZALVGRID_PG_LOGOSUBF01 .
FORM LOGOSUB USING    P_L_LOGO.
P_L_LOGO = 'ERPLOGO'.
ENDFORM.                    " LOGOSUB
***INCLUDE ZALVGRID_PG_SELECT_DATAF01 .
FORM SELECT_DATA .
SELECT RBKP~BELNR
         RBKP~BLDAT
         RSEG~BUZEI
         RSEG~MATNR
         INTO TABLE ITAB
         FROM RBKP INNER JOIN RSEG
    ON RBKP~BELNR = RSEG~BELNR
    WHERE RBKP~BELNR IN IRNO
    AND RBKP~GJAHR = P_GJAHR.
ENDFORM.                    " SELECT_DATA
***INCLUDE ZALVGRID_PG_USER_COMMAND_01I01 .
MODULE USER_COMMAND_0100 INPUT.
CASE SY-UCOMM.
    WHEN 'EXIT'.
      LEAVE PROGRAM.
    WHEN 'CANCEL'.
       EXIT.
       ENDCASE.
ENDMODULE.                 " USER_COMMAND_0100 INPUT
Warm Regards,
PavanKumar.G
Edited by: pavankumar.g on Jan 19, 2012 5:30 AM

Why can't I open files with double click, etc?

Hello, all,
I have been having problems with my MacBook (Aluminum late 2008, I think, OS 10.5). It runs slowly; files on the desktop and in my "Macintosh HD" often won't open with double-click but have to be opened with File-->Open; there are Word Work Files that won't go away; the trackpad is often stiff and not very responsive; clicking on the mouse is very stiff, despite very easy settings. In short, a lot of things are sluggish. Sometimes, also, I get the spinning beach ball, but not all the time.
I have run disk permissons repair from Disk Utility many times (both from the desktop and from the MacBook install disk); I have replaced the directory with Disk Warrior at least twice; I have verified that the disk is OK; I have zapped the PRAM; and done other things of that kind.
I took the MacBook to an Apple Store yesterday. It had been unplugged and much to my surprise, most everything seemed to be working all right. When I opened it today, however, I found everything as it was before I took it to Apple. Including the Word Work files, which I thought were gone.
If I recall correctly, this started when I was working on a long editing project in Word, but I don't know whether that has anything to do with what has happened. I've done similarly long projects before, and this never happened.
I could try trashing the Word Work files (there seem also to be quite a lot of folders with "recovered" files), but I don't want to do that unless I can be assured that nothing bad will come from doing that.
I know this seems quite comprehensive, and may involve several issues, but I'm really unhappy about this and would love to think there is something more I can do, apart from returning to the Apple Store. Besides everything else, how can I khow that I won't find, again, that the MacBook will work fine there but goes back to its troubled state when I return?
Clues, anyone?
Thanks,
jenny

Hi, Mike,
I have 211.59 left out of total HD space of 232.57.Space should not be a problem. I'll try using Activity Monitor today. I have 2 GB of memory. But since this is the first time I[ve had this problem, I don't see how it could be a problem with memory, do you?
I finished the project more than a week ago. After I shut down the computer, it temporarily returned to normal but subsewuently started acting odd again, although I've done nothing but email since I turned it on again.
I am going to try getting rid of the Word Work files and see whether that helps. I am wondering whether the book I was working on had something wrong with it (it was written in NeoOffice but opened in Word), or my copy of Word has gotten corrupted. Although I haven't used Word since I finished with the book.
Sorry this font is so tiny, but although I was able to choose my font in my original message, there doesnt' seem to be a place to do that here. At least, I don't see it.
I'll get back to you on the Activity Monitor. Thanks.
jenny

How can i show details in ALV GRID with double click in a row?

Hello, ich try to show the details of a row with double click in the line,
but it doesn't work!?
I have a eventhandler for doubleclick and the program run this code, but what i have to do, to show the details!?
I try it with some methods like cl_gui_cfw=>set_new_ok_code, ...
i think about the methods cl_gui_alv_grid->show_detail, but this method is private,
i can create a class with inheritance of the cl_gui_alv_grid class and try this method!?
Have anybody any ideas!?

Hello Lars
The following sample reports shows an ALV list with company codes. Double-clicking on any company code will open a second ALV list displaying all customers.
*& Report ZUS_SDN_ALVGRID_EVENTS_1
REPORT zus_sdn_alvgrid_events_1.
DATA:
gd_okcode        TYPE ui_func,
gt_fcat          TYPE lvc_t_fcat,
go_docking       TYPE REF TO cl_gui_docking_container,
go_docking2      TYPE REF TO cl_gui_docking_container,
go_grid1         TYPE REF TO cl_gui_alv_grid,
go_grid2         TYPE REF TO cl_gui_alv_grid.
DATA:
gt_t001          TYPE STANDARD TABLE OF t001,
gt_knb1          TYPE STANDARD TABLE OF knb1.
*       CLASS lcl_eventhandler DEFINITION
CLASS lcl_eventhandler DEFINITION.
PUBLIC SECTION.
    CLASS-METHODS:
      handle_double_click FOR EVENT double_click OF cl_gui_alv_grid
        IMPORTING
          e_row
          e_column
          es_row_no
          sender.
ENDCLASS.                    "lcl_eventhandler DEFINITION
*       CLASS lcl_eventhandler IMPLEMENTATION
CLASS lcl_eventhandler IMPLEMENTATION.
METHOD handle_double_click.
*   define local data
    DATA:
      ls_t001     TYPE t001,
      ls_col_id   TYPE lvc_s_col.
    CHECK ( sender = go_grid1 ).
    READ TABLE gt_t001 INTO ls_t001 INDEX e_row-index.
    CHECK ( ls_t001-bukrs IS NOT INITIAL ).
    SELECT * FROM knb1 INTO TABLE gt_knb1
      WHERE bukrs = ls_t001-bukrs.
    IF ( syst-subrc NE 0 ).
      MESSAGE 'No customers found' TYPE 'S'.
    ELSE.
*     Trigger PAI of dynpro '0100' and set new ok-code
      CALL METHOD cl_gui_cfw=>set_new_ok_code( 'CALL_SCREEN_0200' ).
    ENDIF.
ENDMETHOD.                    "handle_hotspot_click
ENDCLASS.                    "lcl_eventhandler IMPLEMENTATION
START-OF-SELECTION.
SELECT * FROM t001 INTO TABLE gt_t001.
REFRESH: gt_knb1.
* Create docking container
CREATE OBJECT go_docking
    EXPORTING
      parent                      = cl_gui_container=>screen0
      ratio                       = 90
    EXCEPTIONS
      OTHERS                      = 6.
IF sy-subrc <> 0.
*   MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
*              WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
CREATE OBJECT go_docking2
    EXPORTING
      parent                      = cl_gui_container=>screen0
      ratio                       = 90
    EXCEPTIONS
      OTHERS                      = 6.
IF sy-subrc <> 0.
*   MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
*              WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
* Create ALV grid
CREATE OBJECT go_grid1
    EXPORTING
      i_parent          = go_docking
    EXCEPTIONS
      OTHERS            = 5.
IF sy-subrc <> 0.
*   MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
*              WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
CREATE OBJECT go_grid2
    EXPORTING
      i_parent          = go_docking2
    EXCEPTIONS
      OTHERS            = 5.
IF sy-subrc <> 0.
*   MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
*              WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
* Set event handler
SET HANDLER:
    lcl_eventhandler=>handle_double_click FOR go_grid1.
* Display data
CALL METHOD go_grid1->set_table_for_first_display
    EXPORTING
      i_structure_name = 'T001'
    CHANGING
      it_outtab        = gt_t001
    EXCEPTIONS
      OTHERS           = 4.
IF sy-subrc <> 0.
*   MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
*              WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
CALL METHOD go_grid2->set_table_for_first_display
    EXPORTING
      i_structure_name = 'KNB1'
    CHANGING
      it_outtab        = gt_knb1
    EXCEPTIONS
      OTHERS           = 4.
IF sy-subrc <> 0.
*   MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
*              WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
* Link the docking container to the target dynpro
CALL METHOD go_docking->link
    EXPORTING
      repid                       = syst-repid
      dynnr                       = '0100'
*      CONTAINER                   =
    EXCEPTIONS
      OTHERS                      = 4.
IF sy-subrc <> 0.
*   MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
*              WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
CALL METHOD go_docking2->link
    EXPORTING
      repid                       = syst-repid
      dynnr                       = '0200'
*      CONTAINER                   =
    EXCEPTIONS
      OTHERS                      = 4.
IF sy-subrc <> 0.
*   MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
*              WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
* ok-code field = GD_OKCODE
CALL SCREEN '0100'.
END-OF-SELECTION.
*&      Module STATUS_0100 OUTPUT
*       text
MODULE status_0100 OUTPUT.
SET PF-STATUS 'STATUS_0100'.
* SET TITLEBAR 'xxx'.
ENDMODULE.                 " STATUS_0100 OUTPUT
*&      Module USER_COMMAND_0100 INPUT
*       text
MODULE user_command_0100 INPUT.
CASE gd_okcode.
    WHEN 'BACK' OR
         'END' OR
         'CANC'.
      SET SCREEN 0. LEAVE SCREEN.
    WHEN 'CALL_SCREEN_0200'.
      go_grid2->refresh_table_display( ). " necessary
      CALL SCREEN '0200'.
    WHEN OTHERS.
ENDCASE.
CLEAR: gd_okcode.
ENDMODULE.                 " USER_COMMAND_0100 INPUT
Regards
Uwe

Issue with double click zoom on Essbase Excel Add-in

Several of my users have been experiencing a problem recently when the do a double click zoom in or zoom out in Excel Add-in 7.1.3. It will start clocking (icon flashes as well as the cells while the clocking is occuring) and the only way to break out of it is to hit escape. Sometimes the clocking will only last a minute but, depending on the number of members that you can drill down into, can last several minutes at which point the users end up just escaping out. This doesn't happen with all templates or with all users. Zooming in and zooming out using the menu works fine. This only occurs with double click zooming (which to the users is much quicker and they prefer not using the menu).
This is Excel Add-in 7.1.3 on Office 2007 which I realize is not certified compatible but we have not had this issue until the last few weeks.
Anyone else having this issue? Ideas?

sometimes you dont find any excel sheets open but there will be a process allocated to it and running ..you can see this in the task manager..
so go to task manager and try deleting all the process related to excel.
Now after deleting all the processes you find NO excel sheets open..
Try viewing the required excel sheet now..
hope it works now..

Yosemite problems with double click dock commands and keyboard shorcuts

Similar Messages

Maybe you are looking for